Не работает fglrx

yars, да.
urfin, а это

Uninstalling any previously installed drivers.
Unloading radeon module...
ERROR: Module radeon is in use
Unloading drm module...
ERROR: Module drm is in use by radeon,ttm,drm_kms_helper 

могло быть из-за включённого в дополнительные параметры командной строки ядра radeon.dpm=1?

dezhurant,
Как бы сделал я. :) (подробно)
1) Загружаемся в графику в безопасном режиме. (потому что удобно)
2) Добавляем своего пользователя в группу video (на всякий случай), если не добавлен ранее:
[console=root]usermod -a -G video $USER[/console]
3) Устанавливаем gcc и make:
[console=root]zypper in gcc make[/console]
4) Устанавливаем kernel-devel kernel-desktop-devel и kernel-source для своего ядра.
[console=root]zypper in kernel-desktop-devel kernel-source kernel-devel[/console]
5) Добавление radeon и radeonhd в черный список:
[console=root]echo "blacklist radeon" >> /etc/modprobe.d/50-blacklist.conf && echo "blacklist radeonhd" >> /etc/modprobe.d/50-blacklist.conf[/console]
6) Так же удаляем поддержку KMS из initrd:
[console=root]yast2 sysconfig set NO_KMS_IN_INITRD="yes"[/console]
7) Прописываем nomodeset в загрузку grub2:
В файле:

/etc/default/grub

найти строку:

GRUB_CMDLINE_LINUX_DEFAULT=""

Прописываем nomodeset:

GRUB_CMDLINE_LINUX_DEFAULT="nomodeset"

(остальные параметры через пробел в эти же кавычки"
пример:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"

8.) Обновляем initrd и grub2:
[console=root]mkinitrd && grub2-mkconfig -o /boot/grub2/grub.cfg[/console]
9) Подключаем репозиторий с драйверами:
[console=root]zypper ar -ncgf ht[span]tp://geeko.ioda.net/mirror/amd-fglrx/openSUSE_13.1/[/span] FGLRX && zypper ref[/console]
10) Перезагружаемся.
[console=root]systemctl reboot[/console]
Грузимся как обычно.
Должно выкинуть в консоль с приветствием залогиниться.
Логинимся в рута.
10) Далее набираем:
[console=root]init 3 && zypper in fglrx64_xpic_SUSE131 && systemctl reboot[/console]
11) Всё.

dezhurant написал:

/var/log/Xorg.0.log.old

text

[    19.419] 
X.Org X Server 1.15.0
Release Date: 2013-12-27
[    19.419] X Protocol Version 11, Revision 0
[    19.419] Build Operating System: openSUSE SUSE LINUX
[    19.419] Current Operating System: Linux linux-sdmx.site 3.13.1-12.gfc9498b-desktop #1 SMP PREEMPT Sat Feb 1 19:44:27 UTC 2014 (fc9498b) x86_64
[    19.419] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.1-12.gfc9498b-desktop root=UUID=03a513c4-e548-426d-82cc-4e3c93799ff9 splash=silent quiet showopts radeon.dpm=1
[    19.419] Build Date: 04 February 2014  04:57:14PM
[    19.419]  
[    19.419] Current version of pixman: 0.32.4
[    19.419]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    19.419] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.419] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb  7 00:55:55 2014
[    19.419] (==) Using config file: "/etc/X11/xorg.conf"
[    19.419] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    19.419] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.476] (==) ServerLayout "X.org Configured"
[    19.476] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    19.476] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    19.476] (**) |   |-->Device "aticonfig-Device[0]-0"
[    19.476] (**) |-->Input Device "Mouse0"
[    19.476] (**) |-->Input Device "Keyboard0"
[    19.476] (==) Automatically adding devices
[    19.476] (==) Automatically enabling devices
[    19.476] (==) Automatically adding GPU devices
[    20.179] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    20.179]     Entry deleted from font path.
[    20.179] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[    20.179]     Entry deleted from font path.
[    20.179] (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/ghostscript/,
    /usr/share/fonts/cyrillic:unscaled,
    /usr/share/fonts/truetype/,
    built-ins,
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/ghostscript/,
    /usr/share/fonts/cyrillic:unscaled,
    /usr/share/fonts/truetype/,
    built-ins
[    20.179] (**) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[    20.179] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    20.179] (WW) Disabling Mouse0
[    20.179] (WW) Disabling Keyboard0
[    20.179] (II) Loader magic: 0x80cc60
[    20.179] (II) Module ABI versions:
[    20.179]     X.Org ANSI C Emulation: 0.4
[    20.179]     X.Org Video Driver: 15.0
[    20.179]     X.Org XInput driver : 20.0
[    20.179]     X.Org Server Extension : 8.0
[    20.179] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.180] (--) PCI:*(0:1:0:0) 1002:68e4:1043:1c92 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    20.180] Initializing built-in extension Generic Event Extension
[    20.180] Initializing built-in extension SHAPE
[    20.180] Initializing built-in extension MIT-SHM
[    20.180] Initializing built-in extension XInputExtension
[    20.180] Initializing built-in extension XTEST
[    20.180] Initializing built-in extension BIG-REQUESTS
[    20.180] Initializing built-in extension SYNC
[    20.180] Initializing built-in extension XKEYBOARD
[    20.180] Initializing built-in extension XC-MISC
[    20.180] Initializing built-in extension SECURITY
[    20.180] Initializing built-in extension XINERAMA
[    20.180] Initializing built-in extension XFIXES
[    20.180] Initializing built-in extension RENDER
[    20.180] Initializing built-in extension RANDR
[    20.180] Initializing built-in extension COMPOSITE
[    20.180] Initializing built-in extension DAMAGE
[    20.180] Initializing built-in extension MIT-SCREEN-SAVER
[    20.180] Initializing built-in extension DOUBLE-BUFFER
[    20.180] Initializing built-in extension RECORD
[    20.180] Initializing built-in extension DPMS
[    20.180] Initializing built-in extension Present
[    20.180] Initializing built-in extension DRI3
[    20.180] Initializing built-in extension X-Resource
[    20.180] Initializing built-in extension XVideo
[    20.180] Initializing built-in extension XVideo-MotionCompensation
[    20.180] Initializing built-in extension XFree86-VidModeExtension
[    20.180] Initializing built-in extension XFree86-DGA
[    20.180] Initializing built-in extension XFree86-DRI
[    20.180] Initializing built-in extension DRI2
[    20.180] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    20.180] (II) LoadModule: "vnc"
[    20.543] (II) Loading /usr/lib64/xorg/modules/extensions/libvnc.so
[    21.803] (II) Module vnc: vendor="Constantin Kaplinsky"
[    23.553]     compiled for 1.13.0, module version = 1.0.0
[    23.553]     Module class: X.Org Server Extension
[    23.553]     ABI class: X.Org Server Extension, version 7.0
[    23.556] (EE) module ABI major version (7) doesn't match the server's version (8)
[    23.556] (II) UnloadModule: "vnc"
[    23.556] (II) Unloading vnc
[    23.696] (EE) Failed to load module "vnc" (module requirement mismatch, 0)
[    23.696] (II) LoadModule: "glx"
[    23.696] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    23.696] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    23.696]     compiled for 6.9.0, module version = 1.0.0
[    23.696] Loading extension GLX
[    23.696] (II) LoadModule: "fglrx"
[    23.788] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[    24.507] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    24.507]     compiled for 1.4.99.906, module version = 13.35.5
[    24.507]     Module class: X.Org Video Driver
[    24.524] (II) Loading sub module "fglrxdrm"
[    24.524] (II) LoadModule: "fglrxdrm"
[    24.525] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    24.542] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    24.542]     compiled for 1.4.99.906, module version = 13.35.5
[    24.542] (II) AMD Proprietary Linux Driver Version Identifier:13.35.5
[    24.542] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.35.1005               
[    24.542] (II) AMD Proprietary Linux Driver Build Date: Jan 29 2014 21:41:24
[    24.542] (++) using VT number 7
[    24.543] (WW) Falling back to old probe method for fglrx
[    25.249] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    25.285] ukiDynamicMajor: found major device number 250
[    25.285] ukiDynamicMajor: found major device number 250
[    25.285] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    25.285] ukiOpenDevice: node name is /dev/ati/card0
[    25.285] ukiOpenDevice: open result is 9, (OK)
[    25.682] ukiOpenByBusid: ukiOpenMinor returns 9
[    25.682] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    25.795] (--) Chipset Supported AMD Graphics Processor (0x68E4) found
[    25.815] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    25.825] (II) fglrx(0): pEnt->device->identifier=0x1446df0
[    25.825] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[    25.825] (II) Loading sub module "vgahw"
[    25.825] (II) LoadModule: "vgahw"
[    25.825] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[    25.836] (II) Module vgahw: vendor="X.Org Foundation"
[    25.836]     compiled for 1.15.0, module version = 0.1.0
[    25.836]     ABI class: X.Org Video Driver, version 15.0
[    25.836] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    25.836] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    25.836] (==) fglrx(0): Default visual is TrueColor
[    25.837] (**) fglrx(0): Option "DPMS" "true"
[    25.837] (==) fglrx(0): RGB weight 888
[    25.837] (II) fglrx(0): Using 8 bits per RGB 
[    25.837] (==) fglrx(0): Buffer Tiling is ON
[    25.837] (II) Loading sub module "fglrxdrm"
[    25.837] (II) LoadModule: "fglrxdrm"
[    25.837] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[    25.837] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    25.837]     compiled for 1.4.99.906, module version = 13.35.5
[    25.840] ukiDynamicMajor: found major device number 250
[    25.840] ukiDynamicMajor: found major device number 250
[    25.840] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    25.840] ukiOpenDevice: node name is /dev/ati/card0
[    25.840] ukiOpenDevice: open result is 11, (OK)
[    25.840] ukiOpenByBusid: ukiOpenMinor returns 11
[    25.840] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    25.841] (**) fglrx(0): NoAccel = NO
[    25.841] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    25.841] (--) fglrx(0): Chipset: "AMD Radeon HD 6300M Series" (Chipset = 0x68e4)
[    25.841] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1c92)
[    25.841] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    25.841] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    25.841] (--) fglrx(0): MMIO registers at 0xd0020000
[    25.841] (--) fglrx(0): I/O port at 0x0000d000
[    25.841] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    25.843] (II) fglrx(0): AC Adapter is used
[    25.854] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    25.867] (II) Loading sub module "vbe"
[    25.867] (II) LoadModule: "vbe"
[    25.867] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[    25.876] (II) Module vbe: vendor="X.Org Foundation"
[    25.876]     compiled for 1.15.0, module version = 1.1.0
[    25.876]     ABI class: X.Org Video Driver, version 15.0
[    25.884] (II) fglrx(0): VESA BIOS detected
[    25.884] (II) fglrx(0): VESA VBE Version 3.0
[    25.884] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    25.884] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    25.884] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    25.884] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    25.884] (II) fglrx(0): VESA VBE OEM Product: PARK
[    25.884] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    25.884] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    25.884] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    25.884] (II) fglrx(0): PCIE card detected
[    25.884] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    25.884] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    25.884] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    25.884] (II) fglrx(0): RandR 1.2 support is enabled!
[    25.884] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    25.884] (II) Loading sub module "fb"
[    25.884] (II) LoadModule: "fb"
[    25.884] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    25.884] (II) Module fb: vendor="X.Org Foundation"
[    25.884]     compiled for 1.15.0, module version = 1.0.0
[    25.884]     ABI class: X.Org ANSI C Emulation, version 0.4
[    25.884] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    25.884] (II) Loading sub module "ddc"
[    25.884] (II) LoadModule: "ddc"
[    25.884] (II) Module "ddc" already built-in
[    26.442] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    26.442] (II) fglrx(0): Output DFP1 has no monitor section
[    26.442] (II) fglrx(0): Output CRT1 has no monitor section
[    26.442] (II) Loading sub module "ddc"
[    26.442] (II) LoadModule: "ddc"
[    26.442] (II) Module "ddc" already built-in
[    26.442] (II) fglrx(0): Connected Display0: LVDS
[    26.442] (II) fglrx(0): Display0 EDID data ---------------------------
[    26.442] (II) fglrx(0): Manufacturer: AUO  Model: 26ec  Serial#: 0
[    26.442] (II) fglrx(0): Year: 2009  Week: 1
[    26.442] (II) fglrx(0): EDID Version: 1.3
[    26.442] (II) fglrx(0): Digital Display Input
[    26.442] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.442] (II) fglrx(0): Gamma: 2.20
[    26.442] (II) fglrx(0): No DPMS capabilities specified
[    26.442] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    26.442] (II) fglrx(0): First detailed timing is preferred mode
[    26.442] (II) fglrx(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[    26.442] (II) fglrx(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[    26.442] (II) fglrx(0): Manufacturer's mask: 0
[    26.442] (II) fglrx(0): Supported detailed timing:
[    26.442] (II) fglrx(0): clock: 71.8 MHz   Image Size:  344 x 193 mm
[    26.442] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    26.442] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 784 v_border: 0
[    26.442] (II) fglrx(0): Unknown vendor-specific block f
[    26.442] (II) fglrx(0):  AUO
[    26.442] (II) fglrx(0):  B156XW02 V6
[    26.442] (II) fglrx(0): EDID (in hex):
[    26.442] (II) fglrx(0):     00ffffffffffff0006afec2600000000
[    26.442] (II) fglrx(0):     01130103802213780ad7759355558d29
[    26.442] (II) fglrx(0):     24505400000001010101010101010101
[    26.442] (II) fglrx(0):     0101010101010c1c56a0500010303020
[    26.442] (II) fglrx(0):     360058c1100000180000000f00000000
[    26.442] (II) fglrx(0):     00000000000000000020000000fe0041
[    26.442] (II) fglrx(0):     554f0a202020202020202020000000fe
[    26.442] (II) fglrx(0):     004231353658573032205636200a0065
[    26.442] (II) fglrx(0): End of Display0 EDID data --------------------
[    26.442] (II) fglrx(0): Dynamic Surface Resizing Enabled
[    26.443] (II) fglrx(0): EDID for output LVDS
[    26.443] (II) fglrx(0): Manufacturer: AUO  Model: 26ec  Serial#: 0
[    26.443] (II) fglrx(0): Year: 2009  Week: 1
[    26.443] (II) fglrx(0): EDID Version: 1.3
[    26.443] (II) fglrx(0): Digital Display Input
[    26.443] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.443] (II) fglrx(0): Gamma: 2.20
[    26.443] (II) fglrx(0): No DPMS capabilities specified
[    26.443] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    26.443] (II) fglrx(0): First detailed timing is preferred mode
[    26.443] (II) fglrx(0): redX: 0.577 redY: 0.333   greenX: 0.333 greenY: 0.554
[    26.443] (II) fglrx(0): blueX: 0.161 blueY: 0.144   whiteX: 0.313 whiteY: 0.329
[    26.443] (II) fglrx(0): Manufacturer's mask: 0
[    26.443] (II) fglrx(0): Supported detailed timing:
[    26.443] (II) fglrx(0): clock: 71.8 MHz   Image Size:  344 x 193 mm
[    26.443] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    26.443] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 784 v_border: 0
[    26.443] (II) fglrx(0): Unknown vendor-specific block f
[    26.443] (II) fglrx(0):  AUO
[    26.443] (II) fglrx(0):  B156XW02 V6
[    26.443] (II) fglrx(0): EDID (in hex):
[    26.443] (II) fglrx(0):     00ffffffffffff0006afec2600000000
[    26.443] (II) fglrx(0):     01130103802213780ad7759355558d29
[    26.443] (II) fglrx(0):     24505400000001010101010101010101
[    26.443] (II) fglrx(0):     0101010101010c1c56a0500010303020
[    26.443] (II) fglrx(0):     360058c1100000180000000f00000000
[    26.443] (II) fglrx(0):     00000000000000000020000000fe0041
[    26.443] (II) fglrx(0):     554f0a202020202020202020000000fe
[    26.443] (II) fglrx(0):     004231353658573032205636200a0065
[    26.443] (II) fglrx(0): EDID vendor "AUO", prod id 9964
[    26.443] (II) fglrx(0): Printing DDC gathered Modelines:
[    26.443] (II) fglrx(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    26.443] (II) fglrx(0): Printing probed modes for output LVDS
[    26.443] (II) fglrx(0): Modeline "1366x768"x60.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[    26.443] (II) fglrx(0): Modeline "1360x768"x60.0   71.80  1360 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz e)
[    26.443] (II) fglrx(0): Modeline "1280x768"x60.0   71.80  1280 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz e)
[    26.443] (II) fglrx(0): Modeline "1280x720"x60.0   71.80  1280 1414 1446 1526  720 771 777 784 -hsync -vsync (47.1 kHz e)
[    26.443] (II) fglrx(0): Modeline "1024x768"x60.0   71.80  1024 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz e)
[    26.443] (II) fglrx(0): Modeline "1024x600"x60.0   71.80  1024 1414 1446 1526  600 771 777 784 -hsync -vsync (47.1 kHz e)
[    26.443] (II) fglrx(0): Modeline "800x600"x60.0   71.80  800 1414 1446 1526  600 771 777 784 -hsync -vsync (47.1 kHz e)
[    26.443] (II) fglrx(0): Modeline "800x480"x60.0   71.80  800 1414 1446 1526  480 771 777 784 -hsync -vsync (47.1 kHz e)
[    26.443] (II) fglrx(0): Modeline "640x480"x60.0   71.80  640 1414 1446 1526  480 771 777 784 -hsync -vsync (47.1 kHz e)
[    26.443] (II) fglrx(0): EDID for output DFP1
[    26.443] (II) fglrx(0): EDID for output CRT1
[    26.443] (II) fglrx(0): Output LVDS connected
[    26.443] (II) fglrx(0): Output DFP1 disconnected
[    26.443] (II) fglrx(0): Output CRT1 disconnected
[    26.443] (II) fglrx(0): Using exact sizes for initial modes
[    26.443] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    26.443] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.443] (II) fglrx(0): Display dimensions: (340, 190) mm
[    26.443] (II) fglrx(0): DPI set to (102, 102)
[    26.443] (II) fglrx(0): Eyefinity capable adapter detected.
[    26.443] (II) fglrx(0): Adapter AMD Radeon HD 6300M Series has 4 configurable heads and 1 displays connected.
[    26.443] (==) fglrx(0):  PseudoColor visuals disabled
[    26.443] (II) Loading sub module "ramdac"
[    26.443] (II) LoadModule: "ramdac"
[    26.443] (II) Module "ramdac" already built-in
[    26.443] (==) fglrx(0): NoDRI = NO
[    26.443] (==) fglrx(0): Capabilities: 0x00000000
[    26.443] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    26.443] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    26.443] (==) fglrx(0): UseFastTLS=0
[    26.443] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    26.443] (--) Depth 24 pixmap format is 32 bpp
[    26.443] Loading extension ATIFGLRXDRI
[    26.443] (II) fglrx(0): doing swlDriScreenInit
[    26.443] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    26.443] ukiDynamicMajor: found major device number 250
[    26.444] ukiDynamicMajor: found major device number 250
[    26.444] ukiDynamicMajor: found major device number 250
[    26.444] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.444] ukiOpenDevice: node name is /dev/ati/card0
[    26.444] ukiOpenDevice: open result is 12, (OK)
[    26.444] ukiOpenByBusid: ukiOpenMinor returns 12
[    26.444] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    26.444] (II) fglrx(0): [uki] DRM interface version 1.0
[    26.444] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    26.444] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    26.444] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fc85c9b8000
[    26.444] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    26.444] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    26.444] (II) fglrx(0): swlDriScreenInit done
[    26.444] (II) fglrx(0): Kernel Module Version Information:
[    26.444] (II) fglrx(0):     Name: fglrx
[    26.444] (II) fglrx(0):     Version: 13.35.5
[    26.444] (II) fglrx(0):     Date: Jan 29 2014
[    26.444] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    26.444] (II) fglrx(0): Kernel Module version matches driver.
[    26.444] (II) fglrx(0): Kernel Module Build Time Information:
[    26.444] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.13.1-12.gfc9498b-desktop
[    26.444] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    26.444] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    26.444] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    26.444] (II) fglrx(0): [uki] register handle = 0x00004000
[    26.588] (II) fglrx(0): DRI initialization successfull
[    26.588] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[    26.588] (==) fglrx(0): Backing store enabled
[    26.588] Loading extension FGLRXEXTENSION
[    26.588] (**) fglrx(0): DPMS enabled
[    26.588] (II) fglrx(0): Initialized in-driver Xinerama extension
[    26.588] (**) fglrx(0): Textured Video is enabled.
[    26.588] (II) LoadModule: "glesx"
[    26.589] (II) Loading /usr/lib64/xorg/modules/glesx.so
[    27.810] (II) Module glesx: vendor="X.Org Foundation"
[    27.810]     compiled for 1.4.99.906, module version = 1.0.0
[    27.810] Loading extension GLESX
[    27.810] (II) fglrx(0): GLESX enableFlags = 8784
[    27.833] (II) fglrx(0): GLESX is enabled
[    27.833] (II) LoadModule: "amdxmm"
[    27.833] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[    27.866] (II) Module amdxmm: vendor="X.Org Foundation"
[    27.866]     compiled for 1.4.99.906, module version = 2.0.0
[    27.876] Loading extension AMDXVOPL
[    27.876] Loading extension AMDXVBA
[    27.903] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    27.906] (II) fglrx(0): Enable composite support successfully
[    27.906] (WW) fglrx(0): Option "VendorName" is not used
[    27.906] (WW) fglrx(0): Option "ModelName" is not used
[    27.906] (II) fglrx(0): X context handle = 0x1
[    27.906] (II) fglrx(0): [DRI] installation complete
[    27.906] (==) fglrx(0): Silken mouse enabled
[    27.906] (==) fglrx(0): Using HW cursor of display infrastructure!
[    27.907] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.907] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    27.907] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    28.842] (--) RandR disabled
[    28.848] ukiDynamicMajor: found major device number 250
[    28.848] ukiDynamicMajor: found major device number 250
[    28.848] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    28.848] ukiOpenDevice: node name is /dev/ati/card0
[    28.848] ukiOpenDevice: open result is 13, (OK)
[    28.848] ukiOpenByBusid: ukiOpenMinor returns 13
[    28.848] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    30.796] ukiDynamicMajor: found major device number 250
[    30.796] ukiDynamicMajor: found major device number 250
[    30.796] ukiDynamicMajor: found major device number 250
[    30.796] ukiOpenDevice: node name is /dev/ati/card0
[    30.796] ukiOpenDevice: open result is 14, (OK)
[    30.796] ukiGetBusid returned 'PCI:1:0:0'
[    30.796] ukiOpenDevice: node name is /dev/ati/card1
[    30.796] ukiOpenDevice: open result is -1, (No such device)
[    30.796] ukiOpenDevice: open result is -1, (No such device)
[    30.796] ukiOpenDevice: Open failed
[    30.796] ukiOpenDevice: node name is /dev/ati/card2
[    30.796] ukiOpenDevice: open result is -1, (No such device)
[    30.796] ukiOpenDevice: open result is -1, (No such device)
[    30.796] ukiOpenDevice: Open failed
[    30.796] ukiOpenDevice: node name is /dev/ati/card3
[    30.796] ukiOpenDevice: open result is -1, (No such device)
[    30.796] ukiOpenDevice: open result is -1, (No such device)
[    30.796] ukiOpenDevice: Open failed
[    30.796] ukiOpenDevice: node name is /dev/ati/card4
[    30.796] ukiOpenDevice: open result is -1, (No such device)
[    30.796] ukiOpenDevice: open result is -1, (No such device)
[    30.796] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card5
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card6
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card7
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card8
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card9
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card10
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card11
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card12
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: Open failed
[    30.797] ukiOpenDevice: node name is /dev/ati/card13
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.797] ukiOpenDevice: open result is -1, (No such device)
[    30.798] ukiOpenDevice: Open failed
[    30.798] ukiOpenDevice: node name is /dev/ati/card14
[    30.798] ukiOpenDevice: open result is -1, (No such device)
[    30.798] ukiOpenDevice: open result is -1, (No such device)
[    30.798] ukiOpenDevice: Open failed
[    30.798] ukiOpenDevice: node name is /dev/ati/card15
[    30.798] ukiOpenDevice: open result is -1, (No such device)
[    30.798] ukiOpenDevice: open result is -1, (No such device)
[    30.798] ukiOpenDevice: Open failed
[    30.798] ukiDynamicMajor: found major device number 250
[    30.798] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    30.798] ukiOpenDevice: node name is /dev/ati/card0
[    30.798] ukiOpenDevice: open result is 14, (OK)
[    30.798] ukiOpenByBusid: ukiOpenMinor returns 14
[    30.798] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    35.637] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    35.637] ukiDynamicMajor: found major device number 250
[    35.637] ukiDynamicMajor: found major device number 250
[    35.638] ukiDynamicMajor: found major device number 250
[    35.638] ukiOpenDevice: node name is /dev/ati/card0
[    35.638] ukiOpenDevice: open result is 15, (OK)
[    35.638] ukiGetBusid returned 'PCI:1:0:0'
[    35.638] ukiOpenDevice: node name is /dev/ati/card1
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: Open failed
[    35.638] ukiOpenDevice: node name is /dev/ati/card2
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: Open failed
[    35.638] ukiOpenDevice: node name is /dev/ati/card3
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: Open failed
[    35.638] ukiOpenDevice: node name is /dev/ati/card4
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: Open failed
[    35.638] ukiOpenDevice: node name is /dev/ati/card5
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: Open failed
[    35.638] ukiOpenDevice: node name is /dev/ati/card6
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: Open failed
[    35.638] ukiOpenDevice: node name is /dev/ati/card7
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: Open failed
[    35.638] ukiOpenDevice: node name is /dev/ati/card8
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: open result is -1, (No such device)
[    35.638] ukiOpenDevice: Open failed
[    35.638] ukiO

Попробуйте загрузиться так:
[console]acpi_backlight=vendor acpi_osi=Linux[/console]

dezhurant написал:

yars, да.
urfin, а это

text

Uninstalling any previously installed drivers.
Unloading radeon module...
ERROR: Module radeon is in use
Unloading drm module...
ERROR: Module drm is in use by radeon,ttm,drm_kms_helper 

могло быть из-за включённого в дополнительные параметры командной строки ядра radeon.dpm=1?

aliaksei1818, это куда - в параметры загрузки ядра?
verg, мы с Вами не первый месяц эту тему муссируем, Вы же знаете, что описанное Вами много раз было проделано... Повторю для верности...

"dezhurant" написал:

это куда - в параметры загрузки ядра?

Да.

"dezhurant" написал:

Повторю для верности...

Предыдущий драйвер удалите сначала.




з.ы. вроде у вас гибридная графика intel+AMD.

могло быть из-за включённого в дополнительные параметры командной строки ядра radeon.dpm=1?

Нет, вы не выгрузите модуль radeon (это же касается и nouveau), поскольку используется kms, что требует ряд дополнительных шагов. Проще, заранее загрузиться в многопользовательский режим без графического режима. Об этом же написано на оф. вики Freedesktop.org

aliaksei1818, это куда - в параметры загрузки ядра?

В параметрах ядра в меню grub: e ->...

.ы. вроде у вас гибридная графика intel+AMD.

[ 20.180] (--) PCI:*(0:1:0:0) 1002:68e4:1043:1c92 rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072

Я увидел только одну...

Не нравится мне это в Xorg.log

25.815] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found

verg, дошёл до zypper in... Почему-то при консольном входе интернета нет... o_O
aliaksei1818,
Добавил в параметры... Так же всё...

Хм. В release-notes пишут:

NOTE: If a Linux 2.6.11 or newer kernel was built with CONFIG_AGP enabled, the kernel AGP frontend is required to load the fglrx kernel module. To identify whether your kernel with CONFIG_AGP enabled, look for CONFIG_AGP=y in the kernel config file, or if the 'agpgart' module is loaded

[console]# lsmod | grep "agp\|fglrx"[/console]

dezhurant,
Cкачайте драйвер отдельно: http://geeko.ioda.net/mirror/amd-fglrx/openSUSE_13.1/x86_64/fglrx64_xpic_SUSE131-13.251-3.x86_64.rpm
Потом пункт №10 будет такой:
[console=root]init 3 && zypper in /путь_до_файла/fglrx64_xpic_SUSE131-13.251-3.x86_64.rpm && systemctl reboot[/console]

"dezhurant" написал:

Почему-то при консольном входе интернета нет...

Я обычно делаю так:

# dhcpcd eth0

и интернет работает.

"yars" написал:

Хм. В release-notes пишут:

При том, что все поддерживаемые драйвером карты PCI-Express =)

aliaksei1818,
Добавил в параметры... Так же всё...

Тогда тут только один вариант, загрузиться в безопасный режим и посмотреть, что твориться в директории /sys/class/backlight/
Далее по аналогии:
http://forums.opensuse.org/showthread.php/461620-Нетбук-SAMSUNG-N127-дисплей-и-регулировка-яркости?p=2459196#post2459196
Это лишь мой диагноз, удачи!

aliaksei1818,
У него судя по: (и загрузкам в безопасный режим)

"dezhurant" написал:

verg, дошёл до zypper in... Почему-то при консольном входе интернета нет... ai

всё в порядке с подсветкой.

[console]lsmod | grep "agp\|fglrx"
fglrx 8093572 0
amd_iommu_v2 19054 1 fglrx
button 13952 1 fglrx[/console]
Старый-то драйвер забыл снести... :[
Verg, в безопасном режиме - да, всё в порядке... :)

Но ведь 12.3 со старыми драйверами работала, а с новыми - нет...

У него судя по: (и загрузкам в безопасный режим)

А дальше управление подсветкой берет на себя DE:
http://forums.opensuse.org/showthread.php/461620-Нетбук-SAMSUNG-N127-дисплей-и-регулировка-яркости/page4
Вот в этом то и дело...