router, ifconfig, dhcp

acl "corpnets" { 192.168.1.0/24; 127.0.0.1; };
options {
// Рабочая директория: 
   directory "/etc/named.d";  
// Pid файл создавать тоже в рабочей директории, хотя можно
// написать любую другую, например /var/run/named/named.pid: 
   pid-file "named.pid";            
// Разрешаем посылать запросы только от тех сетей, которые мы
// указали выше:
   allow-query { "corpnets"; };
   forwarders { 127.0.0.1; 77.37.251.33; 77.37.255.30; };
   };
// Указатели корневых серверов: 
   zone "." in { 
       type hint; 
       file "named.root"; };
// Настраиваем обратное отображение
// для адреса 127.0.0.1: 
   zone "0.0.127.in-addr.arpa" in { 
       type master; 
       file "localhost.rev"; 
       notify no; };

log-facility local7;
# Наша подсеть
subnet 192.168.1.0 netmask 255.255.255.0 {
# Диапазон выдаваемых IP адресов.
range 192.168.1.5 192.168.1.10;
# IP сервера указано тут потому что мы подняли собственный DNS. Вы можете использовать тут DNS провайдера.
option domain-name-servers 192.168.1.1;
# Дефолтный gateway
option routers 192.168.1.1;
# Время обновления адресов(12 часов).
default-lease-time 43200;
max-lease-time 86400;
}
host netbookethernet {
    hardware ethernet bc:ae:c5:1a:aa:db;
    fixed-address 192.168.1.4;
    }
host netbookwifi {
    hardware ethernet 48:5d:60:89:75:70;
    fixed-address 192.168.1.3;
    }
host homePC {
    hardware ethernet 00:1d:60:76:5c:a4;
    fixed-address 192.168.1.2;
    }

interface=wlan0
bridge=br0
driver=nl80211
ssid=WiFiRouter
country_code=RU
hw_mode=g
channel=7
macaddr_acl=0
wpa=3
wpa_passphrase=password1234
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump

br0       Link encap:Ethernet  HWaddr 00:17:31:ED:CB:52  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7290 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8629 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:4967539 (4.7 Mb)  TX bytes:8661736 (8.2 Mb)
eth0      Link encap:Ethernet  HWaddr 00:17:31:BE:DD:8E  
          inet addr:178.140.3.21  Bcast:178.140.3.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2550494 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1609884 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:3439446016 (3280.1 Mb)  TX bytes:115644447 (110.2 Mb)
          Interrupt:17 Base address:0xa800 
eth1      Link encap:Ethernet  HWaddr 00:E0:51:18:03:85  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7372 errors:18 dropped:273 overruns:8 frame:12
          TX packets:8771 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:5120522 (4.8 Mb)  TX bytes:8684355 (8.2 Mb)
          Interrupt:22 Base address:0xec00 
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:522 errors:0 dropped:0 overruns:0 frame:0
          TX packets:522 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:57526 (56.1 Kb)  TX bytes:57526 (56.1 Kb)
mon.wlan0 Link encap:UNSPEC  HWaddr 00-17-31-ED-CB-52-30-30-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4162 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:268905 (262.6 Kb)  TX bytes:0 (0.0 b)
wlan0     Link encap:Ethernet  HWaddr 00:17:31:ED:CB:52  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:573 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:64651 (63.1 Kb)

wlan0     IEEE 802.11bg  Mode:Master  Frequency:2.442 GHz  Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          
mon.wlan0  IEEE 802.11bg  Mode:Monitor  Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

[164.380613] martian source 169.254.255.255 from 169.254.109.212, on dev br0
[164.380613] ll header: ff:ff:ff:ff:ff:ff:00:1d:60:76:5c:a4:08:00
[165.130634] martian source 169.254.255.255 from 168.254.109.212, on dev br0
[165.130640] ll header: ff:ff:ff:ff:ff:ff:00:1d:60:76:5c:a4:08:00

## Path:     Network/DHCP/DHCP server
## Description: DHCPv4 server settings
## Type:    string
## Default:    ""
## ServiceRestart: dhcpd
#
# Interface(s) for the DHCPv4 server to listen on.
# 
# A special keyword is ANY, it will cause dhcpd to autodetect available
# interfaces.
#
# Examples: DHCPD_INTERFACE="eth0 eth1 eth2"
#           DHCPD_INTERFACE="ANY"
#
DHCPD_INTERFACE="br0"
## Path:     Network/DHCP/DHCP server
## Description: DHCPv6 server settings
## Type:    string
## Default:    ""
## ServiceRestart: dhcpd6
#
# Interface(s) for the DHCPv6 server to listen on.
# 
# A special keyword is ANY, it will cause dhcpd to autodetect available
# interfaces.
#
# Examples: DHCPD6_INTERFACE="eth0 eth1 eth2"
#           DHCPD6_INTERFACE="ANY"
#
DHCPD6_INTERFACE=""
## Type:        list(yes,no,auto,)
## Default:     
## Description: Restart dhcpv4 server when interface goes up (again)
#
# When the dhcp server is listening on a virtual interface, e.g. bridge,
# bonding or vlan, and this interface gets deleted and recreated during
# a network restart, dhcpd will stop answering requests on this interface
# and needs a restart as well.
# Begining with SLE-10 SP3, we install an if-up.d post script (see ifup(8)
# and also ifservices(5)), enabled in auto mode by default. This variable
# can be used to force or avoid the dhcp server restart:
#
#   no:   do not restart dhcpd
#  yes:   force a dhcp server restart
# auto:   (default) restart for virtual interfaces (bond,bridge,vlan) when
#         all interfaces used in DHCPD_INTERFACE variable are up as well.
#
# Except of this global setting, the variable can be specified per interface
# in the interface configurations (/etc/sysconfig/network/ifcfg-$name).
#
DHCPD_IFUP_RESTART=""
## Type:        list(yes,no,auto,)
## Default:     
## Description: Restart dhcpv6 server when interface goes up (again)
#
# When the dhcp server is listening on a virtual interface, e.g. bridge,
# bonding or vlan, and this interface gets deleted and recreated during
# a network restart, dhcpd will stop answering requests on this interface
# and needs a restart as well.
# Begining with SLE-10 SP3, we install an if-up.d post script (see ifup(8)
# and also ifservices(5)), enabled in auto mode by default. This variable
# can be used to force or avoid the dhcp server restart:
#
#   no:   do not restart dhcpd
#  yes:   force a dhcp server restart
# auto:   (default) restart for virtual interfaces (bond,bridge,vlan) when
#         all interfaces used in DHCPD_INTERFACE variable are up as well.
#
# Except of this global setting, the variable can be specified per interface
# in the interface configurations (/etc/sysconfig/network/ifcfg-$name).
#
DHCPD6_IFUP_RESTART=""
## Type:    yesno
## Default:    yes
## ServiceRestart: dhcpd
#
# Shall the DHCP server dhcpd run in a chroot jail (/var/lib/dhcp)?
#
# Each time you start dhcpd with the init script, /etc/dhcpd.conf will 
# be copied to /var/lib/dhcp/etc/.
# 
# Some files that are important for hostname to IP address resolution
# (/etc/{gai.conf,nsswitch.conf,resolv.conf,host.conf,hosts,localtime},
# /lib/lib{resolv.so.*,libnss_*.so.*,libpthread.so.0,libdl.so.2}) will
# also be copied to the chroot jail by the init script when you start
# it (less than 1MB altogether).
# 
# The pid file will be in /var/lib/dhcp/var/run/dhcpd.pid. 
#
DHCPD_RUN_CHROOTED="yes"
## Type:    yesno
## Default:    yes
## ServiceRestart: dhcpd6
#
# Shall the DHCP server dhcpd run in a chroot jail (/var/lib/dhcp)?
#
# Each time you start dhcpd with the init script, /etc/dhcpd.conf will 
# be copied to /var/lib/dhcp/etc/.
# 
# Some files that are important for hostname to IP address resolution
# (/etc/{gai.conf,nsswitch.conf,resolv.conf,host.conf,hosts,localtime},
# /lib/lib{resolv.so.*,libnss_*.so.*,libpthread.so.0,libdl.so.2}) will
# also be copied to the chroot jail by the init script when you start
# it (less than 1MB altogether).
# 
# The pid file will be in /var/lib/dhcp/var/run/dhcpd.pid. 
#
DHCPD6_RUN_CHROOTED="yes"
## Type:    string
## Default:    ""
## ServiceRestart: dhcpd
#
# Since version 3, dhcpd.conf can contain include statements. 
# If you enter the names of any include files here, _all_ conf
# files will be copied to $chroot/etc/, when dhcpd is started in the 
# chroot jail. (/etc/dhcpd.conf is always copied.)
#
# For your convenience, you can also specify entire directories, like 
# "/etc/dhcpd.conf.d".
#
# Example: "/etc/dhcpd.conf.shared /etc/dhcpd.conf.bootp-clients"
#
DHCPD_CONF_INCLUDE_FILES=""
## Type:    string
## Default:    ""
## ServiceRestart: dhcpd6
#
# Since version 3, dhcpd.conf can contain include statements. 
# If you enter the names of any include files here, _all_ conf
# files will be copied to $chroot/etc/, when dhcpd is started in the 
# chroot jail. (/etc/dhcpd.conf is always copied.)
#
# For your convenience, you can also specify entire directories, like 
# "/etc/dhcpd.conf.d".
#
# Example: "/etc/dhcpd.conf.shared /etc/dhcpd.conf.bootp-clients"
#
DHCPD6_CONF_INCLUDE_FILES=""
## Type:    string
## Default:    "dhcpd"
## ServiceRestart: dhcpd
#
# Leave empty or enter "root" to let dhcpd run as root. 
# Enter "dhcpd" to run dhcpd as user 'dhcpd'.
#
DHCPD_RUN_AS="dhcpd"
## Type:    string
## Default:    "dhcpd"
## ServiceRestart: dhcpd6
#
# Leave empty or enter "root" to let dhcpd run as root. 
# Enter "dhcpd" to run dhcpd as user 'dhcpd'.
#
DHCPD6_RUN_AS="dhcpd"
## Type:    string
## Default:    ""
## ServiceRestart: dhcpd
#
# Other arguments that you want dhcpd to be started with
# (e.g. "-p 1234" for a non-standard port to listen on)
#
DHCPD_OTHER_ARGS=""
## Type:    string
## Default:    ""
## ServiceRestart: dhcpd6
#
# Other arguments that you want dhcpd to be started with
# (e.g. "-p 1234" for a non-standard port to listen on)
#
DHCPD6_OTHER_ARGS=""
## Type:    string
## Default:    ""
## ServiceRestart: dhcpd
#
# You may specify another dhcpd binary to be run. 
# The full path needs to be specified.
#
# If empty, the default applies. 
#
DHCPD_BINARY=""
## Type:    string
## Default:    ""
## ServiceRestart: dhcpd6
#
# You may specify another dhcpd binary to be run. 
# The full path needs to be specified.
#
# If empty, the default applies. 
#
DHCPD6_BINARY=""

#! /bin/sh
#
# Copyright (c) 2002 SuSE Linux AG Nuernberg, Germany.  All rights reserved.
#
# Author: Werner Fink, 1996
#         Burchard Steinbild, 1996
#
# /etc/init.d/boot.local
#
# script with local commands to be executed from init on system startup
#
# Here you should add things, that should happen directly after booting
# before we're going to the first run level.
#