А если пинговать не по имени, а по адресу, проблема остаётся?
LinuxForum.Fans
Настройка wi-fi
Автор: Spawn047
150 сообщений
20702 просмотров
Как это сделать?
В настройках роутера (ведь у вас точка доступа скорей всего там).
А если пинговать не по имени, а по адресу, проблема остаётся?
Если рядом много точек на том же канале, что и ваша, есть смысл поменять канал.
Проблема таже. Пинговал свой маршрутизатор - таже беда.
В настройках роутера (ведь у вас точка доступа скорей всего там).
Это я сделал раньше.
Попробуйте загрузиться с какого-либо «живого» Linux'а (например, SystemRescueCd) и проверить подключение WiFi.
P.S. Для запуска графического режима в SystemRescueCd нужно набрать в консоли startx и далее настроить подключение в сетевом апплете.
P.S. Для запуска графического режима в SystemRescueCd нужно набрать в консоли startx и далее настроить подключение в сетевом апплете.
Я знаю, спасибо! Только я уже писал на этом форуме, что при подключении к сети (не важно по wi-fi или по проводу) всё блокируется (ничего не могу запустить, тот же терминал). Как только отключаюсь от сети - всё работает!
олько я уже писал на этом форуме, что при подключении к сети (не важно по wi-fi или по проводу) всё блокируется (ничего не могу запустить, тот же терминал). Как только отключаюсь от сети - всё работает!
Попробуйте при загрузке с «живого» диска выбрать в опциях загрузку с видеодрайвером vesa.
Загрузился с livedvd-amd64-multilib-2012.1. Сеть работает нормально:
ping ayndex.ru
Gentoo-2012 ~ # ping yandex.ru
PING yandex.ru (87.250.250.11) 56(84) bytes of data.
64 bytes from yandex.ru (87.250.250.11): icmp_req=1 ttl=57 time=13.9 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=2 ttl=57 time=12.4 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=3 ttl=57 time=12.1 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=4 ttl=57 time=12.2 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=5 ttl=57 time=12.5 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=6 ttl=57 time=12.0 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=7 ttl=57 time=12.1 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=8 ttl=57 time=12.1 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=9 ttl=57 time=12.1 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=10 ttl=57 time=12.4 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=11 ttl=57 time=12.8 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=12 ttl=57 time=12.3 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=13 ttl=57 time=12.1 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=14 ttl=57 time=12.3 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=15 ttl=57 time=12.2 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=16 ttl=57 time=12.4 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=17 ttl=57 time=12.7 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=18 ttl=57 time=12.4 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=19 ttl=57 time=12.6 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=20 ttl=57 time=12.3 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=21 ttl=57 time=12.2 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=22 ttl=57 time=12.1 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=23 ttl=57 time=12.0 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=24 ttl=57 time=12.8 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=25 ttl=57 time=12.8 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=26 ttl=57 time=13.6 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=27 ttl=57 time=13.3 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=28 ttl=57 time=12.2 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=29 ttl=57 time=14.5 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=30 ttl=57 time=12.6 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=31 ttl=57 time=12.1 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=32 ttl=57 time=12.3 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=33 ttl=57 time=13.8 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=34 ttl=57 time=15.3 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=35 ttl=57 time=12.5 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=36 ttl=57 time=12.7 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=37 ttl=57 time=12.1 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=38 ttl=57 time=12.8 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=39 ttl=57 time=12.3 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=40 ttl=57 time=14.0 ms
64 bytes from yandex.ru (87.250.250.11): icmp_req=41 ttl=57 time=12.2 ms
^C
--- yandex.ru ping statistics ---
41 packets transmitted, 41 received, 0% packet loss, time 40060ms
rtt min/avg/max/mdev = 12.082/12.688/15.310/0.725 ms
Попробуйте при загрузке с «живого» диска выбрать в опциях загрузку с видеодрайвером vesa.
При загрузке нажал Tab. Как указать видеодрайвер?
Загрузился с livedvd-amd64-multilib-2012.1. Сеть работает нормально:
Теперь нужно сравнивать используемые драйвера и настройки ядра и системы, т.е. начать с анализа команд
text
lspci -k | grep -i net -A 2
text
lsmod
text
iwconfig wlan0
text
dmesg
При загрузке нажал Tab. Как указать видеодрайвер?
Проверить не могу, но там при появлении меню загрузчика должно быть что-то вроде подменю загрузки с расширенными опциями и альтернативным ядром — пункты A), B), C) или D).
Теперь нужно сравнивать используемые драйвера и настройки ядра и системы, т.е. начать с анализа команд
lspci -k | grep -i net -A 2
# lspci -k | grep -i net -A 2
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: AzureWave AW-NB037H 802.11bgn Wireless Half-size Mini PCIe Card [AR9002WB-1NGCD]
Kernel driver in use: ath9k
--
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: r8169
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: AzureWave AW-NB037H 802.11bgn Wireless Half-size Mini PCIe Card [AR9002WB-1NGCD]
Kernel driver in use: ath9k
--
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: ASUSTeK Computer Inc. Device 1277
Kernel driver in use: r8169
lsmod
# lsmod
Module Size Used by
aes_x86_64 7340 2
aes_generic 26002 1 aes_x86_64
snd_hda_codec_hdmi 21200 1
snd_hda_codec_realtek 181684 1
arc4 1274 2
ath9k 78355 0
mac80211 160236 1 ath9k
snd_hda_intel 19856 0
ath9k_common 1848 1 ath9k
r8169 40478 0
ath9k_hw 344596 2 ath9k,ath9k_common
snd_hda_codec 57380 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
ath 13703 3 ath9k,ath9k_common,ath9k_hw
intel_agp 10320 0
cfg80211 140836 3 ath9k,mac80211,ath
intel_gtt 11801 2 intel_agp
i2c_i801 7262 0
video 10959 0
backlight 3744 1 video
i2c_core 16207 1 i2c_i801
snd_hwdep 5046 1 snd_hda_codec
rfkill 13268 1 cfg80211
snd_pcm 56361 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
processor 24495 4
snd_timer 15481 1 snd_pcm
snd 47299 7 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 5977 2 snd_hda_intel,snd_pcm
thermal 7658 0
battery 10723 0
mii 3411 1 r8169
button 4247 0
ac 3081 0
thermal_sys 12594 3 video,processor,thermal
hid_logitech_dj 8865 0
pcspkr 1699 0
sha256_generic 9821 0
libiscsi 29675 0
scsi_transport_iscsi 30559 1 libiscsi
tg3 118187 0
libphy 14435 1 tg3
e1000 84266 0
fuse 56106 1
nfs 134480 0
lockd 61683 1 nfs
sunrpc 164744 3 nfs,lockd
jfs 138542 0
raid10 22488 0
raid456 42949 0
async_raid6_recov 1209 1 raid456
async_memcpy 1166 1 raid456
async_pq 3051 1 raid456
async_xor 2169 2 raid456,async_pq
xor 4425 1 async_xor
async_tx 1718 5 raid456,async_raid6_recov,async_memcpy,async_pq,async_xor
raid6_pq 77410 2 async_raid6_recov,async_pq
raid1 21978 0
raid0 6014 0
dm_snapshot 24138 0
dm_crypt 13663 0
dm_mirror 11350 0
dm_region_hash 6156 1 dm_mirror
dm_log 7428 2 dm_mirror,dm_region_hash
dm_mod 58050 4 dm_snapshot,dm_crypt,dm_mirror,dm_log
scsi_wait_scan 695 0
hid_sunplus 1377 0
hid_sony 2496 0
hid_samsung 2822 0
hid_pl 1297 0
hid_petalynx 1906 0
hid_monterey 1473 0
hid_microsoft 2771 0
hid_logitech 6829 0
hid_gyration 2012 0
hid_ezkey 1306 0
hid_cypress 1810 0
hid_chicony 1689 0
hid_cherry 1441 0
hid_belkin 1606 0
hid_apple 4945 0
hid_a4tech 1884 0
sl811_hcd 8863 0
usbhid 21739 1 hid_logitech_dj
ohci_hcd 19196 0
ssb 37220 1 ohci_hcd
uhci_hcd 18800 0
usb_storage 39859 4
ehci_hcd 32610 0
usbcore 121462 8 hid_sony,sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
usb_common 850 1 usbcore
aic94xx 64496 0
libsas 45117 1 aic94xx
lpfc 430374 0
qla2xxx 313354 0
megaraid_sas 66526 0
megaraid_mbox 23982 0
megaraid_mm 6921 1 megaraid_mbox
megaraid 35832 0
aacraid 65658 0
sx8 11172 0
DAC960 62036 0
cciss 43501 0
3w_9xxx 29209 0
3w_xxxx 20771 0
mptsas 33089 0
scsi_transport_sas 21329 3 aic94xx,libsas,mptsas
mptfc 10429 0
scsi_transport_fc 36658 3 lpfc,qla2xxx,mptfc
scsi_tgt 8328 1 scsi_transport_fc
mptspi 11311 0
mptscsih 16717 3 mptsas,mptfc,mptspi
mptbase 54664 4 mptsas,mptfc,mptspi,mptscsih
atp870u 23993 0
dc395x 26851 0
qla1280 19355 0
imm 8756 0
parport 25159 1 imm
dmx3191d 9044 0
sym53c8xx 63228 0
gdth 73123 0
advansys 51810 0
initio 15391 0
BusLogic 19341 0
arcmsr 23395 0
aic7xxx 106128 0
aic79xx 110288 0
scsi_transport_spi 17592 5 mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx
sg 21012 0
pdc_adma 5314 0
sata_inic162x 6378 0
sata_mv 23902 0
ata_piix 20839 0
ahci 19101 0
libahci 16938 1 ahci
sata_qstor 5081 0
sata_vsc 3934 0
sata_uli 2905 0
sata_sis 3554 0
sata_sx4 8109 0
sata_nv 18295 0
sata_via 7480 0
sata_svw 4094 0
sata_sil24 10108 0
sata_sil 7172 0
sata_promise 9741 0
pata_sl82c105 3539 0
pata_cs5530 4173 0
pata_cs5520 3603 0
pata_via 8241 0
pata_jmicron 2312 0
pata_marvell 2817 0
pata_sis 9996 1 sata_sis
pata_netcell 2110 0
pata_sc1200 2919 0
pata_pdc202xx_old 4307 0
pata_triflex 3085 0
pata_atiixp 3609 0
pata_opti 2687 0
pata_amd 9908 0
pata_ali 8887 0
pata_it8213 3279 0
pata_pcmcia 9685 0
pcmcia 29372 2 ssb,pata_pcmcia
pcmcia_core 10509 1 pcmcia
pata_ns87415 3193 0
pata_ns87410 2685 0
pata_serverworks 4993 0
pata_artop 4733 0
pata_it821x 8269 0
pata_optidma 4426 0
pata_hpt3x2n 5330 0
pata_hpt3x3 2949 0
pata_hpt37x 10721 0
pata_hpt366 4950 0
pata_cmd64x 5805 0
pata_efar 3395 0
pata_rz1000 2642 0
pata_sil680 4470 0
pata_radisys 2823 0
pata_pdc2027x 6137 0
pata_mpiix 2779 0
libata 137497 52 libsas,pdc_adma,sata_inic162x,sata_mv,ata_piix,ahci,libahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise,pata_sl82c105,pata_cs5530,pata_cs5520,pata_via,pata_jmicron,pata_marvell,pata_sis,pata_netcell,pata_sc1200,pata_pdc202xx_old,pata_triflex,pata_atiixp,pata_opti,pata_amd,pata_ali,pata_it8213,pata_pcmcia,pata_ns87415,pata_ns87410,pata_serverworks,pata_artop,pata_it821x,pata_optidma,pata_hpt3x2n,pata_hpt3x3,pata_hpt37x,pata_hpt366,pata_cmd64x,pata_efar,pata_rz1000,pata_sil680,pata_radisys,pata_pdc2027x,pata_mpiix
Module Size Used by
aes_x86_64 7340 2
aes_generic 26002 1 aes_x86_64
snd_hda_codec_hdmi 21200 1
snd_hda_codec_realtek 181684 1
arc4 1274 2
ath9k 78355 0
mac80211 160236 1 ath9k
snd_hda_intel 19856 0
ath9k_common 1848 1 ath9k
r8169 40478 0
ath9k_hw 344596 2 ath9k,ath9k_common
snd_hda_codec 57380 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
ath 13703 3 ath9k,ath9k_common,ath9k_hw
intel_agp 10320 0
cfg80211 140836 3 ath9k,mac80211,ath
intel_gtt 11801 2 intel_agp
i2c_i801 7262 0
video 10959 0
backlight 3744 1 video
i2c_core 16207 1 i2c_i801
snd_hwdep 5046 1 snd_hda_codec
rfkill 13268 1 cfg80211
snd_pcm 56361 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
processor 24495 4
snd_timer 15481 1 snd_pcm
snd 47299 7 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
snd_page_alloc 5977 2 snd_hda_intel,snd_pcm
thermal 7658 0
battery 10723 0
mii 3411 1 r8169
button 4247 0
ac 3081 0
thermal_sys 12594 3 video,processor,thermal
hid_logitech_dj 8865 0
pcspkr 1699 0
sha256_generic 9821 0
libiscsi 29675 0
scsi_transport_iscsi 30559 1 libiscsi
tg3 118187 0
libphy 14435 1 tg3
e1000 84266 0
fuse 56106 1
nfs 134480 0
lockd 61683 1 nfs
sunrpc 164744 3 nfs,lockd
jfs 138542 0
raid10 22488 0
raid456 42949 0
async_raid6_recov 1209 1 raid456
async_memcpy 1166 1 raid456
async_pq 3051 1 raid456
async_xor 2169 2 raid456,async_pq
xor 4425 1 async_xor
async_tx 1718 5 raid456,async_raid6_recov,async_memcpy,async_pq,async_xor
raid6_pq 77410 2 async_raid6_recov,async_pq
raid1 21978 0
raid0 6014 0
dm_snapshot 24138 0
dm_crypt 13663 0
dm_mirror 11350 0
dm_region_hash 6156 1 dm_mirror
dm_log 7428 2 dm_mirror,dm_region_hash
dm_mod 58050 4 dm_snapshot,dm_crypt,dm_mirror,dm_log
scsi_wait_scan 695 0
hid_sunplus 1377 0
hid_sony 2496 0
hid_samsung 2822 0
hid_pl 1297 0
hid_petalynx 1906 0
hid_monterey 1473 0
hid_microsoft 2771 0
hid_logitech 6829 0
hid_gyration 2012 0
hid_ezkey 1306 0
hid_cypress 1810 0
hid_chicony 1689 0
hid_cherry 1441 0
hid_belkin 1606 0
hid_apple 4945 0
hid_a4tech 1884 0
sl811_hcd 8863 0
usbhid 21739 1 hid_logitech_dj
ohci_hcd 19196 0
ssb 37220 1 ohci_hcd
uhci_hcd 18800 0
usb_storage 39859 4
ehci_hcd 32610 0
usbcore 121462 8 hid_sony,sl811_hcd,usbhid,ohci_hcd,uhci_hcd,usb_storage,ehci_hcd
usb_common 850 1 usbcore
aic94xx 64496 0
libsas 45117 1 aic94xx
lpfc 430374 0
qla2xxx 313354 0
megaraid_sas 66526 0
megaraid_mbox 23982 0
megaraid_mm 6921 1 megaraid_mbox
megaraid 35832 0
aacraid 65658 0
sx8 11172 0
DAC960 62036 0
cciss 43501 0
3w_9xxx 29209 0
3w_xxxx 20771 0
mptsas 33089 0
scsi_transport_sas 21329 3 aic94xx,libsas,mptsas
mptfc 10429 0
scsi_transport_fc 36658 3 lpfc,qla2xxx,mptfc
scsi_tgt 8328 1 scsi_transport_fc
mptspi 11311 0
mptscsih 16717 3 mptsas,mptfc,mptspi
mptbase 54664 4 mptsas,mptfc,mptspi,mptscsih
atp870u 23993 0
dc395x 26851 0
qla1280 19355 0
imm 8756 0
parport 25159 1 imm
dmx3191d 9044 0
sym53c8xx 63228 0
gdth 73123 0
advansys 51810 0
initio 15391 0
BusLogic 19341 0
arcmsr 23395 0
aic7xxx 106128 0
aic79xx 110288 0
scsi_transport_spi 17592 5 mptspi,dmx3191d,sym53c8xx,aic7xxx,aic79xx
sg 21012 0
pdc_adma 5314 0
sata_inic162x 6378 0
sata_mv 23902 0
ata_piix 20839 0
ahci 19101 0
libahci 16938 1 ahci
sata_qstor 5081 0
sata_vsc 3934 0
sata_uli 2905 0
sata_sis 3554 0
sata_sx4 8109 0
sata_nv 18295 0
sata_via 7480 0
sata_svw 4094 0
sata_sil24 10108 0
sata_sil 7172 0
sata_promise 9741 0
pata_sl82c105 3539 0
pata_cs5530 4173 0
pata_cs5520 3603 0
pata_via 8241 0
pata_jmicron 2312 0
pata_marvell 2817 0
pata_sis 9996 1 sata_sis
pata_netcell 2110 0
pata_sc1200 2919 0
pata_pdc202xx_old 4307 0
pata_triflex 3085 0
pata_atiixp 3609 0
pata_opti 2687 0
pata_amd 9908 0
pata_ali 8887 0
pata_it8213 3279 0
pata_pcmcia 9685 0
pcmcia 29372 2 ssb,pata_pcmcia
pcmcia_core 10509 1 pcmcia
pata_ns87415 3193 0
pata_ns87410 2685 0
pata_serverworks 4993 0
pata_artop 4733 0
pata_it821x 8269 0
pata_optidma 4426 0
pata_hpt3x2n 5330 0
pata_hpt3x3 2949 0
pata_hpt37x 10721 0
pata_hpt366 4950 0
pata_cmd64x 5805 0
pata_efar 3395 0
pata_rz1000 2642 0
pata_sil680 4470 0
pata_radisys 2823 0
pata_pdc2027x 6137 0
pata_mpiix 2779 0
libata 137497 52 libsas,pdc_adma,sata_inic162x,sata_mv,ata_piix,ahci,libahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise,pata_sl82c105,pata_cs5530,pata_cs5520,pata_via,pata_jmicron,pata_marvell,pata_sis,pata_netcell,pata_sc1200,pata_pdc202xx_old,pata_triflex,pata_atiixp,pata_opti,pata_amd,pata_ali,pata_it8213,pata_pcmcia,pata_ns87415,pata_ns87410,pata_serverworks,pata_artop,pata_it821x,pata_optidma,pata_hpt3x2n,pata_hpt3x3,pata_hpt37x,pata_hpt366,pata_cmd64x,pata_efar,pata_rz1000,pata_sil680,pata_radisys,pata_pdc2027x,pata_mpiix
iwconfig wlan0
# iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"Моя сеть"
Mode:Managed Frequency:2.462 GHz Access Point: 40:4A:03:68:52:32
Bit Rate=150 Mb/s Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=66/70 Signal level=-44 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:6 Missed beacon:0
wlan0 IEEE 802.11bgn ESSID:"Моя сеть"
Mode:Managed Frequency:2.462 GHz Access Point: 40:4A:03:68:52:32
Bit Rate=150 Mb/s Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=66/70 Signal level=-44 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:6 Missed beacon:0
dmesg
# dmesg
ow [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xdec00000-0xdf5fffff]
pci 0000:00:1c.0: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xde200000-0xdebfffff]
pci 0000:00:1c.1: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xdd800000-0xde1fffff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xdec00000-0xdf5fffff]
pci_bus 0000:02: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xde200000-0xdebfffff]
pci_bus 0000:03: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xdd800000-0xde1fffff]
pci_bus 0000:04: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3884k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800a6ce0000 - ffff8800aace0000
software IO TLB at phys 0xa6ce0000 - 0xaace0000
audit: initializing netlink socket (disabled)
type=2000 audit(1342020149.160:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
GFS2 installed
msgmni has been set to 15808
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 468k freed
libata version 3.00 loaded.
Refined TSC clocksource calibration: 2294.787 MHz.
Switching to clocksource tsc
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf606000 port 0xdf606100 irq 41
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xdf606000 port 0xdf606200 irq 41
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATAPI: HL-DT-STDVDRAM GT34N, AS00, max UDMA/100
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-8: WDC WD7500BPKT-00PK4T0, 01.01A01, max UDMA/133
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT34N AS00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.1-7[28000]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
Emulex LightPulse Fibre Channel SCSI driver 8.3.27
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf608000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf607000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
usb 1-1.1: device descriptor read/64, error -32
usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3005
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5120
usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.2: Product: USB 2.0 Camera
usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd.
raid6: int64x1 2441 MB/s
usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: USB2.0-CRW
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 20100201396000000
raid6: int64x2 2457 MB/s
usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
raid6: int64x4 2244 MB/s
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Receiver
usb 2-1.1: Manufacturer: Logitech
usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
raid6: int64x8 1741 MB/s
usb 2-1.2: New USB device found, idVendor=152d, idProduct=2338
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 2-1.2: Product: USB to ATA/ATAPI bridge
usb 2-1.2: Manufacturer: JMicron
usb 2-1.2: SerialNumber: 0014A2222222
scsi6 : usb-storage 2-1.2:1.0
raid6: sse2x1 6130 MB/s
raid6: sse2x2 7622 MB/s
raid6: sse2x4 8636 MB/s
raid6: using algorithm sse2x4 (8636 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 10230.800 MB/sec
xor: using function: generic_sse (10230.800 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.17)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
Loading iSCSI transport class v2.0-870.
scsi 6:0:0:0: Direct-Access ST340014 A PQ: 0 ANSI: 2 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb3): mounted filesystem with ordered data mode
udevd[15759]: starting version 171
usb 2-1.2: reset high-speed USB device number 4 using ehci_hcd
input: PC Speaker as /devices/platform/pcspkr/input/input2
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
input: Logitech Unifying Device. Wireless PID:1017 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:046D:C52B.0003/input/input3
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:1d.0-1.1:1
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (54 C)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xe040-0xe05f] conflicts with ACPI region SMBI [io 0xe040-0xe04f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
cfg80211: Calling CRDA to update world regulatory domain
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 42 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xffffc9000007a000, bc:ae:c5:5e:77:29, XID 0c200000 IRQ 42
r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:03:00.0: setting latency timer to 64
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000060000, irq=17
HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
EXT3-fs (sdb3): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb4): using internal journal
EXT3-fs (sdb4): mounted filesystem with ordered data mode
Adding 4194300k swap on /dev/sdb2. Priority:-1 extents:1 across:4194300k
r8169 0000:04:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
r8169 0000:04:00.0: eth0: link down
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
ow [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xdec00000-0xdf5fffff]
pci 0000:00:1c.0: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xde200000-0xdebfffff]
pci 0000:00:1c.1: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xdd800000-0xde1fffff]
pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xdec00000-0xdf5fffff]
pci_bus 0000:02: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xde200000-0xdebfffff]
pci_bus 0000:03: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xdd800000-0xde1fffff]
pci_bus 0000:04: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3884k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800a6ce0000 - ffff8800aace0000
software IO TLB at phys 0xa6ce0000 - 0xaace0000
audit: initializing netlink socket (disabled)
type=2000 audit(1342020149.160:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
GFS2 installed
msgmni has been set to 15808
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Real Time Clock Driver v1.12b
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 468k freed
libata version 3.00 loaded.
Refined TSC clocksource calibration: 2294.787 MHz.
Switching to clocksource tsc
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf606000 port 0xdf606100 irq 41
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xdf606000 port 0xdf606200 irq 41
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATAPI: HL-DT-STDVDRAM GT34N, AS00, max UDMA/100
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-8: WDC WD7500BPKT-00PK4T0, 01.01A01, max UDMA/133
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT34N AS00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
imm: Version 2.05 (for Linux 2.4.0)
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.1-7[28000]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
Emulex LightPulse Fibre Channel SCSI driver 8.3.27
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf608000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf607000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
usb 1-1.1: device descriptor read/64, error -32
usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3005
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5120
usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.2: Product: USB 2.0 Camera
usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd.
raid6: int64x1 2441 MB/s
usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: USB2.0-CRW
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 20100201396000000
raid6: int64x2 2457 MB/s
usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
raid6: int64x4 2244 MB/s
usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: USB Receiver
usb 2-1.1: Manufacturer: Logitech
usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
raid6: int64x8 1741 MB/s
usb 2-1.2: New USB device found, idVendor=152d, idProduct=2338
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 2-1.2: Product: USB to ATA/ATAPI bridge
usb 2-1.2: Manufacturer: JMicron
usb 2-1.2: SerialNumber: 0014A2222222
scsi6 : usb-storage 2-1.2:1.0
raid6: sse2x1 6130 MB/s
raid6: sse2x2 7622 MB/s
raid6: sse2x4 8636 MB/s
raid6: using algorithm sse2x4 (8636 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 10230.800 MB/sec
xor: using function: generic_sse (10230.800 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.17)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
Loading iSCSI transport class v2.0-870.
scsi 6:0:0:0: Direct-Access ST340014 A PQ: 0 ANSI: 2 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb3): mounted filesystem with ordered data mode
udevd[15759]: starting version 171
usb 2-1.2: reset high-speed USB device number 4 using ehci_hcd
input: PC Speaker as /devices/platform/pcspkr/input/input2
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
input: Logitech Unifying Device. Wireless PID:1017 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:046D:C52B.0003/input/input3
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:1d.0-1.1:1
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (54 C)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0xe040-0xe05f] conflicts with ACPI region SMBI [io 0xe040-0xe04f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
cfg80211: Calling CRDA to update world regulatory domain
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 42 for MSI/MSI-X
r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xffffc9000007a000, bc:ae:c5:5e:77:29, XID 0c200000 IRQ 42
r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:03:00.0: setting latency timer to 64
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000060000, irq=17
HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
EXT3-fs (sdb3): using internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb1): using internal journal
EXT3-fs (sdb1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb4): using internal journal
EXT3-fs (sdb4): mounted filesystem with ordered data mode
Adding 4194300k swap on /dev/sdb2. Priority:-1 extents:1 across:4194300k
r8169 0000:04:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
r8169 0000:04:00.0: eth0: link down
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: deauthenticating from 40:4a:03:68:52:32 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 40:4a:03:68:52:32 (try 1)
wlan0: authenticated
wlan0: associate with 40:4a:03:68:52:32 (try 1)
wlan0: RX AssocResp from 40:4a:03:68:52:32 (capab=0x431 status=0 aid=1)
wlan0: associated
Остановил wpa_supplicant:
/etc/init.d/wpa_supplicant stop
удалил с автозагрузки
rc-update del wpa_supplicant default
Сеть работает, также wi-fi автоматически запускается при загрузке системы.
Lupo Alberto спасибо за помощь!!!
Ещё один вопросик, как сделать, чтобы горел индикатор (лампочка) сети?
Ещё один вопросик, как сделать, чтобы горел индикатор (лампочка) сети?
Какого-то определённого решения не подскажу: во многом это зависит от конкретной конфигурации — есть как «железное», так и программное управление индикацией подключения к сети. Единственное, что могу посоветовать — поищите в конфигурации ядра опции связанные с LED и RFKILL. Ну и «погуглите» по ним, естественно ;)
Проверить не могу, но там при появлении меню загрузчика должно быть что-то вроде подменю загрузки с расширенными опциями и альтернативным ядром — пункты A), B), C) или D).
Все опции перепробовал, даже в иксы не выходит!
Все опции перепробовал, даже в иксы не выходит!
Там вроде бы, если загрузиться в консоль и набрать wizard, можно будет выбрать опции графического режима.
Что-то мне припоминается, была у меня подобная проблема на последних версиях SystemRescueCd.
Обошёл вроде бы так:
— загрузился, как обычно, в консоль;
— набрал wizard, создал конфигурационный файл для «иксов», запустил «иксы»;
— в /etc/X11/xorg.conf поменял драйвер intel на vesa;
— по Ctrl+Alt+← перезапустил «иксы»;
— после этого поднимал сеть, всё работало.
Как-то так, если сами до завтра не решите, проверю точнее, напишу ;)
— по Ctrl+Alt+← перезапустил «иксы»;
Не выходит! Что делать?
Где можно активировать действие клавиш Ctrl+Alt+Backspace?
Где можно активировать действие клавиш Ctrl+Alt+Backspace?
В /etc/X11/xorg.conf
text
Section "InputClass"
Identifier "keyboard-all"
Driver "evdev"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:lwin_toggle,grp:switch,grp_led:caps,compose:ralt,terminate:ctrl_alt_bksp"
MatchIsKeyboard "on"
EndSection
за это отвечает опция terminate:ctrl_alt_bksp
...или, что в данном случае правильнее, так как проще ;) , просто выполнить в эмуляторе терминала или консоли
text
setxkbmap -option terminate:ctrl_alt_bksp
Войдите или зарегистрируйтесь, чтобы ответить.
