Вопросы по установке Gentoo

gentoo@Gentoo-11 ~ $ sudo passwd
New password:
BAD PASSWORD: it does not contain enough DIFFERENT characters
Retype new password:
passwd: password updated successfully
gentoo@Gentoo-11 ~ $ su
Password:
Gentoo-11 gentoo # mkswap /dev/sda1
Setting up swapspace version 1, size = 3145724 KiB
no label, UUID=0ecab3f7-9538-4dc2-948a-6f25be3409e1
Gentoo-11 gentoo # swapon /dev/sda1
Gentoo-11 gentoo # mount /dev/sda2 /mnt/gentoo
Gentoo-11 gentoo # mount /dev/sda5 /mnt/gentoo/usr
Gentoo-11 gentoo # mount /dev/sda6 /mnt/gentoo/var
Gentoo-11 gentoo # mount /dev/sda7 /mnt/gentoo/tmp
Gentoo-11 gentoo # mount /dev/sda8 /mnt/gentoo/home
Gentoo-11 gentoo # mount -t proc none /mnt/gentoo/proc
Gentoo-11 gentoo # mount --rbind /dev /mnt/gentoo/dev
Gentoo-11 gentoo # chroot /mnt/gentoo /bin/bash
Gentoo-11 / # env-update
>>> Regenerating /etc/ld.so.cache...
Gentoo-11 / # source /etc/profile
Gentoo-11 / # export PS1="(chroot) $PS1"
(chroot) Gentoo-11 / # fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xeebc45c4

Device Boot Start End Blocks Id System
/dev/sda1 2048 6293503 3145728 82 Linux swap / Solaris
/dev/sda2 * 6293504 27265023 10485760 83 Linux
/dev/sda3 27265024 94373887 33554432 5 Extended
/dev/sda4 94373888 976771071 441198592 83 Linux
/dev/sda5 27267072 48238591 10485760 83 Linux
/dev/sda6 48240640 69212159 10485760 83 Linux
/dev/sda7 69214208 79699967 5242880 83 Linux
/dev/sda8 79702016 94373887 7335936 83 Linux
(chroot) Gentoo-11 / # mount
udev on /dev type tmpfs (rw,nosuid,relatime,size=10240k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
tmpfs on /newroot type tmpfs (rw,relatime)
/dev/sr0 on /newroot/mnt/cdrom type iso9660 (ro,relatime)
/dev/loop0 on /mnt/static type squashfs (ro,relatime)
none on /mnt/dynamic type tmpfs (rw,relatime,size=430080k)
aufs on / type aufs (rw,relatime,si=9ac79560)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
rc-svcdir on /lib/rc/init.d type tmpfs (rw,nosuid,nodev,noexec,relatime,size=1024k,mode=755)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
shm on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,relatime)
/dev/sda2 on / type ext4 (rw,relatime,user_xattr,acl,barrier=1,stripe=1,data=ordered)
/dev/sda5 on /usr type ext4 (rw,relatime,user_xattr,acl,barrier=1,stripe=1,data=ordered)
/dev/sda6 on /var type ext4 (rw,relatime,user_xattr,acl,barrier=1,stripe=1,data=ordered)
/dev/sda7 on /tmp type ext4 (rw,relatime,user_xattr,acl,barrier=1,stripe=1,data=ordered)
/dev/sda8 on /home type ext4 (rw,relatime,user_xattr,acl,barrier=1,stripe=1,data=ordered)
none on /proc type proc (rw,relatime)
udev on /dev type tmpfs (rw,nosuid,relatime,size=10240k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
shm on /dev/shm type tmpfs (rw,nosuid,nodev,noexec,relatime)
(chroot) Gentoo-11 / # ls -l /boot
total 5344
lrwxrwxrwx 1 root root 1 Dec 24 21:03 boot -> .
drwxr-xr-x 2 root root 4096 Dec 24 22:37 grub
-rw-r--r-- 1 root root 5465648 Dec 24 20:10 kernel-3.0.6-gentoo-r1
(chroot) Gentoo-11 / #

emerge grub
....
....
....
>>> Installing (1 of 1) sys-boot/grub-0.97-r10
*
* To avoid automounting and auto(un)installing with /boot,
* just export the DONT_MOUNT_BOOT variable.
*
*
* Assuming you do not have a separate /boot partition.
*
*
* To avoid automounting and auto(un)installing with /boot,
* just export the DONT_MOUNT_BOOT variable.
*
*
* Assuming you do not have a separate /boot partition.
*
*
* To avoid automounting and auto(un)installing with /boot,
* just export the DONT_MOUNT_BOOT variable.
*
*
* Assuming you do not have a separate /boot partition.
*
* *** IMPORTANT NOTE: you must run grub and install
* the new version's stage1 to your MBR. Until you do,
* stage1 and stage2 will still be the old version, but
* later stages will be the new version, which could
* cause problems such as an unbootable system.
* This means you must use either grub-install or perform
* root/setup manually! For more help, see the handbook:
* http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#grub-install-auto
* Copying files from /lib/grub, /usr/lib/grub and /usr/share/grub to //boot/grub
/var/tmp/portage/sys-boot/grub-0.97-r10/temp/environment: line 3944: 32712 Done egrep -v '^[[:space:]]*(#|$|default|fallback|initrd|password|splashimage|timeout|title)' "${grub_config}"
32713 Segmentation fault | /sbin/grub --batch --device-map="${dir}"/device.map > /dev/null
* Grub has been installed to //boot successfully.
*
* To interactively install grub files to another device such as a USB
* stick, just run the following and specify the directory as prompted:
* emerge --config =grub-0.97-r10
* Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell
* grub where to install in a non-interactive way.

* Messages for package sys-boot/grub-0.97-r10:

*
* To avoid automounting and auto(un)installing with /boot,
* just export the DONT_MOUNT_BOOT variable.
*

* Messages for package sys-boot/grub-0.97-r10:

* Fallback PaX marking -m
* /var/tmp/portage/sys-boot/grub-0.97-r10/image//sbin/grub
*
* To avoid automounting and auto(un)installing with /boot,
* just export the DONT_MOUNT_BOOT variable.
*
*
* To avoid automounting and auto(un)installing with /boot,
* just export the DONT_MOUNT_BOOT variable.
*
* *** IMPORTANT NOTE: you must run grub and install
* the new version's stage1 to your MBR. Until you do,
* stage1 and stage2 will still be the old version, but
* later stages will be the new version, which could
* cause problems such as an unbootable system.
* This means you must use either grub-install or perform
* root/setup manually! For more help, see the handbook:
* http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#grub-install-auto
* To interactively install grub files to another device such as a USB
* stick, just run the following and specify the directory as prompted:
* emerge --config =grub-0.97-r10
* Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell
* grub where to install in a non-interactive way.
>>> Auto-cleaning packages...

>>> No outdated packages were found on your system.

* Regenerating GNU info directory index...
* Processed 71 info files.

* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.