Debian squeeze 6.0.2.1 + 3G beeline modem

Вот часть логов с /var/log/messages

endor=19d2, idProduct=2000
Sep 23 14:04:14 debian kernel: [ 2.417228] usb 1-2: New USB device strings: M fr=2, Product=1, SerialNumber=3
Sep 23 14:04:14 debian kernel: [ 2.417233] usb 1-2: Product: ZTE CDMA Technol ogies MSM
Sep 23 14:04:14 debian kernel: [ 2.417237] usb 1-2: Manufacturer: ZTE, Incorp orated
Sep 23 14:04:14 debian kernel: [ 2.417241] usb 1-2: SerialNumber: BLNMOP673M3 MSTRG
Sep 23 14:04:14 debian kernel: [ 2.417370] usb 1-2: configuration #1 chosen f rom 1 choice
Sep 23 14:04:14 debian kernel: [ 2.420745] ata6.01: configured for UDMA/33
Sep 23 14:04:14 debian kernel: [ 2.434903] Initializing USB Mass Storage driv er...
Sep 23 14:04:14 debian kernel: [ 2.435105] scsi6 : SCSI emulation for USB Mas s Storage devices
Sep 23 14:04:14 debian kernel: [ 2.435362] usbcore: registered new interface driver usb-storage
Sep 23 14:04:14 debian kernel: [ 2.435368] USB Mass Storage support registere d.
Sep 23 14:04:14 debian kernel: [ 2.438597] scsi 5:0:1:0: CD-ROM TO SHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
Sep 23 14:04:14 debian kernel: [ 2.461226] 8139too Fast Ethernet driver 0.9.2 8
Sep 23 14:04:14 debian kernel: [ 2.461604] ACPI: PCI Interrupt Link [APC4] en abled at IRQ 19
Sep 23 14:04:14 debian kernel: [ 2.461623] 8139too 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
Sep 23 14:04:14 debian kernel: [ 2.466270] eth1: RealTek RTL8139 at 0x9000, 0 0:e0:4c:08:2e:3f, IRQ 19
Sep 23 14:04:14 debian kernel: [ 2.495152] sd 4:0:1:0: [sda] 117229295 512-by te logical blocks: (60.0 GB/55.8 GiB)
Sep 23 14:04:14 debian kernel: [ 2.495259] sd 4:0:1:0: [sda] Write Protect is off
Sep 23 14:04:14 debian kernel: [ 2.495309] sd 4:0:1:0: [sda] Write cache: ena bled, read cache: enabled, doesn't support DPO or FUA
Sep 23 14:04:14 debian kernel: [ 2.495572] sda:sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Sep 23 14:04:14 debian kernel: [ 2.505045] Uniform CD-ROM driver Revision: 3. 20
Sep 23 14:04:14 debian kernel: [ 2.511728] sda1 sda2
Sep 23 14:04:14 debian kernel: [ 2.512570] sd 4:0:1:0: [sda] Attached SCSI di sk
Sep 23 14:04:14 debian kernel: [ 2.537072] sd 4:0:1:0: Attached scsi generic sg0 type 0
Sep 23 14:04:14 debian kernel: [ 2.538066] sr 5:0:1:0: Attached scsi generic sg1 type 5
Sep 23 14:04:14 debian kernel: [ 2.544211] firewire_core: created device fw0: GUID 79ffffffff0d6104, S400
Sep 23 14:04:14 debian kernel: [ 2.913044] kjournald starting. Commit interv al 5 seconds
Sep 23 14:04:14 debian kernel: [ 2.913065] EXT3-fs: mounted filesystem with o rdered data mode.
Sep 23 14:04:14 debian kernel: [ 4.457520] udev[365]: starting version 164
Sep 23 14:04:14 debian kernel: [ 5.031618] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 23 14:04:14 debian kernel: [ 5.072456] processor LNXCPU:00: registered as cooling_device0
Sep 23 14:04:14 debian kernel: [ 5.077721] input: PC Speaker as /devices/plat form/pcspkr/input/input1
Sep 23 14:04:14 debian kernel: [ 5.082539] parport_pc 00:0b: reported by Plug and Play ACPI
Sep 23 14:04:14 debian kernel: [ 5.082642] parport0: PC-style at 0x378 (0x778 ), irq 7 [PCSPP,TRISTATE]
Sep 23 14:04:14 debian kernel: [ 5.094757] input: Power Button as /devices/LN XSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Sep 23 14:04:14 debian kernel: [ 5.094775] ACPI: Power Button [PWRB]
Sep 23 14:04:14 debian kernel: [ 5.095037] input: Power Button as /devices/LN XSYSTM:00/LNXPWRBN:00/input/input3
Sep 23 14:04:14 debian kernel: [ 5.095046] ACPI: Power Button [PWRF]
Sep 23 14:04:14 debian kernel: [ 5.096712] shpchp: Standard Hot Plug PCI Cont roller Driver version: 0.4
Sep 23 14:04:14 debian kernel: [ 5.567654] [drm] Initialized drm 1.1.0 200608 10
Sep 23 14:04:14 debian kernel: [ 5.716221] i2c i2c-0: nForce2 SMBus adapter a t 0x1c00
Sep 23 14:04:14 debian kernel: [ 5.716323] i2c i2c-1: nForce2 SMBus adapter a t 0x2000
Sep 23 14:04:14 debian kernel: [ 5.888104] gameport: NS558 PnP Gameport is pn p00:0e/gameport0, io 0x201, speed 59659kHz
Sep 23 14:04:14 debian kernel: [ 6.162312] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
Sep 23 14:04:14 debian kernel: [ 6.446800] nouveau 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
Sep 23 14:04:14 debian kernel: [ 6.453652] [drm] nouveau 0000:03:00.0: failed to evaluate _DSM: 5
Sep 23 14:04:14 debian kernel: [ 6.454188] [drm] nouveau 0000:03:00.0: Detect ed an NV40 generation card (0x043100a4)
Sep 23 14:04:14 debian kernel: [ 6.455027] [drm] nouveau 0000:03:00.0: Attemp ting to load BIOS image from PROM
Sep 23 14:04:14 debian kernel: [ 6.455050] [drm] nouveau 0000:03:00.0: ... BI OS signature not found
Sep 23 14:04:14 debian kernel: [ 6.455054] [drm] nouveau 0000:03:00.0: Attemp ting to load BIOS image from PRAMIN
Sep 23 14:04:14 debian kernel: [ 6.706770] [drm] nouveau 0000:03:00.0: ... ap pears to be valid
Sep 23 14:04:14 debian kernel: [ 6.706777] [drm] nouveau 0000:03:00.0: BIT BI OS found
Sep 23 14:04:14 debian kernel: [ 6.706783] [drm] nouveau 0000:03:00.0: Bios v ersion 05.43.02.80
Sep 23 14:04:14 debian kernel: [ 6.706791] [drm] nouveau 0000:03:00.0: BIT ta ble 'd' not found
Sep 23 14:04:14 debian kernel: [ 6.706796] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 3.0
Sep 23 14:04:14 debian kernel: [ 6.706804] [drm] nouveau 0000:03:00.0: DCB co nnector table: VHER 0x30 5 7 2
Sep 23 14:04:14 debian kernel: [ 6.706811] [drm] nouveau 0000:03:00.0: 0: 0 x00001030: type 0x30 idx 0 tag 0x07
Sep 23 14:04:14 debian kernel: [ 6.706816] [drm] nouveau 0000:03:00.0: 1: 0 x00000100: type 0x00 idx 1 tag 0xff
Sep 23 14:04:14 debian kernel: [ 6.706822] [drm] nouveau 0000:03:00.0: 2: 0 x00000210: type 0x10 idx 2 tag 0xff
Sep 23 14:04:14 debian kernel: [ 6.706827] [drm] nouveau 0000:03:00.0: 3: 0 x00000211: type 0x11 idx 2 tag 0xff
Sep 23 14:04:14 debian kernel: [ 6.706833] [drm] nouveau 0000:03:00.0: 4: 0 x00000213: type 0x13 idx 2 tag 0xff
Sep 23 14:04:14 debian kernel: [ 6.706838] [drm] nouveau 0000:03:00.0: Raw DC B entry 0: 01000300 00000028
Sep 23 14:04:14 debian kernel: [ 6.706846] [drm] nouveau 0000:03:00.0: Raw DC B entry 1: 04011322 00000020
Sep 23 14:04:14 debian kernel: [ 6.706851] [drm] nouveau 0000:03:00.0: Raw DC B entry 2: 04011320 00000028
Sep 23 14:04:14 debian kernel: [ 6.706855] [drm] nouveau 0000:03:00.0: Raw DC B entry 3: 020223f1 00c0c083
Sep 23 14:04:14 debian kernel: [ 6.706873] [drm] nouveau 0000:03:00.0: Parsin g VBIOS init table 0 at offset 0xE1A6
Sep 23 14:04:14 debian kernel: [ 6.707590] [drm] nouveau 0000:03:00.0: Parsin g VBIOS init table 1 at offset 0xE5E9
Sep 23 14:04:14 debian kernel: [ 6.752254] [drm] nouveau 0000:03:00.0: Parsin g VBIOS init table 2 at offset 0xEABD
Sep 23 14:04:14 debian kernel: [ 6.752303] [drm] nouveau 0000:03:00.0: Parsin g VBIOS init table 3 at offset 0xEC4F
Sep 23 14:04:14 debian kernel: [ 6.779370] [drm] nouveau 0000:03:00.0: Parsin g VBIOS init table 4 at offset 0xED2D
Sep 23 14:04:14 debian kernel: [ 6.815575] [TTM] Zone kernel: Available grap hics memory: 257350 kiB.
Sep 23 14:04:14 debian kernel: [ 6.815601] [drm] nouveau 0000:03:00.0: 256 Mi B VRAM
Sep 23 14:04:14 debian kernel: [ 6.815728] agpgart-nvidia 0000:00:00.0: AGP 3 .0 bridge
Sep 23 14:04:14 debian kernel: [ 6.815754] agpgart: modprobe tried to set rat e=x12. Setting to AGP3 x8 mode.
Sep 23 14:04:14 debian kernel: [ 6.815764] agpgart-nvidia 0000:00:00.0: putti ng AGP V3 device into 8x mode
Sep 23 14:04:14 debian kernel: [ 6.815869] nouveau 0000:03:00.0: putting AGP V3 device into 8x mode
Sep 23 14:04:14 debian kernel: [ 6.815876] [drm] nouveau 0000:03:00.0: 64 MiB GART (aperture)
Sep 23 14:04:14 debian kernel: [ 6.816508] [drm] nouveau 0000:03:00.0: Alloca ting FIFO number 0
Sep 23 14:04:14 debian kernel: [ 6.821369] [drm] nouveau 0000:03:00.0: nouvea u_channel_alloc: initialised FIFO 0
Sep 23 14:04:14 debian kernel: [ 6.821393] [drm] nouveau 0000:03:00.0: Initia l CRTC_OWNER is 0
Sep 23 14:04:14 debian kernel: [ 6.821407] [drm] nouveau 0000:03:00.0: Saving VGA fonts
Sep 23 14:04:14 debian kernel: [ 6.938761] [drm] nouveau 0000:03:00.0: Detect ed a VGA connector
Sep 23 14:04:14 debian kernel: [ 6.939102] [drm] nouveau 0000:03:00.0: Detect ed a DVI-I connector
Sep 23 14:04:14 debian kernel: [ 6.939267] [drm] nouveau 0000:03:00.0: Detect ed a TV connector
Sep 23 14:04:14 debian kernel: [ 6.942270] [drm] nouveau 0000:03:00.0: Settin g dpms mode 3 on vga encoder (output 0)
Sep 23 14:04:14 debian kernel: [ 6.942278] [drm] nouveau 0000:03:00.0: Settin g dpms mode 3 on tmds encoder (output 1)
Sep 23 14:04:14 debian kernel: [ 6.942285] [drm] nouveau 0000:03:00.0: Settin g dpms mode 3 on vga encoder (output 2)
Sep 23 14:04:14 debian kernel: [ 6.942291] [drm] nouveau 0000:03:00.0: Settin g dpms mode 3 on TV encoder (output 3)
Sep 23 14:04:14 debian kernel: [ 6.992021] [drm] nouveau 0000:03:00.0: Load d etected on output A
Sep 23 14:04:14 debian kernel: [ 7.011679] ACPI: PCI Interrupt Link [APCJ] en abled at IRQ 20
Sep 23 14:04:14 debian kernel: [ 7.011692] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
Sep 23 14:04:14 debian kernel: [ 7.092359] [drm] nouveau 0000:03:00.0: alloca ted 1024x768 fb: 0x49000, bo de6c4400
Sep 23 14:04:14 debian kernel: [ 7.105469] [drm] nouveau 0000:03:00.0: Settin g dpms mode 0 on vga encoder (output 0)
Sep 23 14:04:14 debian kernel: [ 7.105477] [drm] nouveau 0000:03:00.0: Output VGA-1 is running on CRTC 0 using output A
Sep 23 14:04:14 debian kernel: [ 7.106946] Console: switching to colour frame buffer device 128x48
Sep 23 14:04:14 debian kernel: [ 7.109876] fb0: nouveaufb frame buffer device
Sep 23 14:04:14 debian kernel: [ 7.109879] registered panic notifier
Sep 23 14:04:14 debian kernel: [ 7.109894] [drm] Initialized nouveau 0.0.15 2 0090420 for 0000:03:00.0 on minor 0
Sep 23 14:04:14 debian kernel: [ 7.332018] intel8x0_measure_ac97_clock: measu red 52510 usecs (2552 samples)
Sep 23 14:04:14 debian kernel: [ 7.332025] intel8x0: clocking to 47407
Sep 23 14:04:14 debian kernel: [ 7.902731] EXT3 FS on sda2, internal journal
Sep 23 14:04:14 debian kernel: [ 8.086167] loop: module loaded
Sep 23 14:04:14 debian kernel: [ 8.699187] eth1: link up, 100Mbps, full-duple x, lpa 0xC5E1
Sep 23 14:19:00 debian kernel: [ 896.522341] usb 1-2: USB disconnect, address 2
Sep 23 14:19:07 debian kernel: [ 902.684025] usb 1-1: new high speed USB device using ehci_hcd and address 3
Sep 23 14:19:07 debian kernel: [ 902.829227] usb 1-1: New USB device found, idV endor=19d2, idProduct=2000
Sep 23 14:19:07 debian kernel: [ 902.829234] usb 1-1: New USB device strings: M fr=2, Product=1, SerialNumber=3
Sep 23 14:19:07 debian kernel: [ 902.829239] usb 1-1: Product: ZTE CDMA Technol ogies MSM
Sep 23 14:19:07 debian kernel: [ 902.829243] usb 1-1: Manufacturer: ZTE, Incorp orated
Sep 23 14:19:07 debian kernel: [ 902.829247] usb 1-1: SerialNumber: BLNMOP673M3 MSTRG
Sep 23 14:19:07 debian kernel: [ 902.830408] usb 1-1: configuration #1 chosen f rom 1 choice
Sep 23 14:19:07 debian kernel: [ 902.832836] scsi7 : SCSI emulation for USB Mas s Storage devices
Sep 23 14:19:08 debian usb_modeswitch: switching 19d2:2000 (ZTE, Incorporated: Z TE CDMA Technologies MSM)
Sep 23 14:50:00 debian kernel: [ 2755.960035] [drm] nouveau 0000:03:00.0: Settin g dpms mode 1 on vga encoder (output 0)
Sep 23 16:26:56 debian kernel: [ 8572.157364] usbcore: registered new interface driver usbserial
Sep 23 16:26:56 debian kernel: [ 8572.157627] USB Serial support registered for generic
Sep 23 16:26:56 debian kernel: [ 8572.157894] usbcore: registered new interface driver usbserial_generic
Sep 23 16:26:56 debian kernel: [ 8572.157899] usbserial: USB Serial Driver core
root@debian:/home/mcs#

покажите вывод
[console]lsusb[/console]

Вот логи с dmesg | grep usb

root@debian:/home/mcs# dmesg|grep usb
[    1.422819] usbcore: registered new interface driver usbfs
[    1.423093] usbcore: registered new interface driver hub
[    1.461465] usbcore: registered new device driver usb
[    1.960071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.960077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.960082] usb usb1: Product: EHCI Host Controller
[    1.960086] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.960090] usb usb1: SerialNumber: 0000:00:02.2
[    1.960729] usb usb1: configuration #1 chosen from 1 choice
[    2.102036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.102042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.102047] usb usb2: Product: OHCI Host Controller
[    2.102051] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[    2.102055] usb usb2: SerialNumber: 0000:00:02.0
[    2.102302] usb usb2: configuration #1 chosen from 1 choice
[    2.158027] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.158033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.158038] usb usb3: Product: OHCI Host Controller
[    2.158042] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[    2.158046] usb usb3: SerialNumber: 0000:00:02.1
[    2.158268] usb usb3: configuration #1 chosen from 1 choice
[    2.272021] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    2.417222] usb 1-2: New USB device found, idVendor=19d2, idProduct=2000
[    2.417228] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.417233] usb 1-2: Product: ZTE CDMA Technologies MSM
[    2.417237] usb 1-2: Manufacturer: ZTE, Incorporated
[    2.417241] usb 1-2: SerialNumber: BLNMOP673M3MSTRG
[    2.417370] usb 1-2: configuration #1 chosen from 1 choice
[    2.435362] usbcore: registered new interface driver usb-storage
[    2.435609] usb-storage: device found at 2
[    2.435613] usb-storage: waiting for device to settle before scanning
[  896.522341] usb 1-2: USB disconnect, address 2
[  902.684025] usb 1-1: new high speed USB device using ehci_hcd and address 3
[  902.829227] usb 1-1: New USB device found, idVendor=19d2, idProduct=2000
[  902.829234] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[  902.829239] usb 1-1: Product: ZTE CDMA Technologies MSM
[  902.829243] usb 1-1: Manufacturer: ZTE, Incorporated
[  902.829247] usb 1-1: SerialNumber: BLNMOP673M3MSTRG
[  902.830408] usb 1-1: configuration #1 chosen from 1 choice
[  902.834849] usb-storage: device found at 3
[  902.834854] usb-storage: waiting for device to settle before scanning
[ 8572.157364] usbcore: registered new interface driver usbserial
[ 8572.157894] usbcore: registered new interface driver usbserial_generic
[ 8572.157899] usbserial: USB Serial Driver core

durc написал:

покажите вывод
[console]lsusb[/console]

root@debian:/home/mcs# lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 19d2:2000 ONDA Communication S.p.A. ZTE MF627/MF628/MF628+ HSDPA
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@debian:/home/mcs#

Попробуйте выполнить команду
[console]eject /media/Beeline[/console]
и через несколько секунд посмотрите снова вывод lsusb.
Если эта строка

Bus 001 Device 003: ID 19d2:2000 ONDA Communication S.p.A. ZTE MF627/MF628/MF628+ HSDPA

изменилась на

Bus 001 Device 003: ID 19d2:0x0031 ONDA Communication S.p.A. ZTE MF627/MF628/MF628+ HSDPA

значит всё хорошо. модем определился.

durc написал:

Попробуйте выполнить команду
[console]eject /media/Beeline[/console]
и через несколько секунд посмотрите снова вывод lsusb.
Если эта строка

Bus 001 Device 003: ID 19d2:2000 ONDA Communication S.p.A. ZTE MF627/MF628/MF628+ HSDPA

изменилась на
[quote]Bus 001 Device 003: ID 19d2:0x0031 ONDA Communication S.p.A. ZTE MF627/MF628/MF628+ HSDPA

значит всё хорошо. модем определился.[/quote]

root@debian:/home/mcs# eject /media/Beeline
eject: не удаётся найти или открыть устройство для `/media/Beeline'

Ну а если
[console]eject /dev/sr0[/console]
???
да и потом
[console]modprobe usbserial vendor=0x19d2 product=0x0031[/console]

durc написал:

Ну а если
[console]eject /dev/sr0[/console]
???
да и потом
[console]modprobe usbserial vendor=0x19d2 product=0x0031[/console]

Сделал, привод открылся, но ничего не поменялось...

root@debian:/home/mcs# lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 19d2:2000 ONDA Communication S.p.A. ZTE MF627/MF628/MF628+ HSDPA
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Последняя попытка
[console]eject /dev/sr1[/console]
Если опять мимо, то не знаю что ещё подсказать.

root@debian:/home/mcs# eject /dev/sr1
eject: не удаётся найти или открыть устройство для `/dev/sr1'

Вот и я о том же....бьюсь-бьюсь а толку никакого

Покажите ls /etc/usb_modeswitch.d

http://linuxforum.ru/viewtopic.php?id=8021

MCS, вот так делать не надо: http://linuxforum.ru/viewtopic.php?pid=214336#p214336 - есть теги spoiler и code - подобные полотна удаляю, поправь.

Почитайте
https://wiki.archlinux.org/index.php/Huawei_E220
https://wiki.archlinux.org/index.php/USB_3G_Modem(Русский)
Может, поможет

Ребята, как ни странно, сегодня пришёл, запустил дебу, сразу посмотрел в dmesg | grep usb и увидел что модем приаттачился к /etc/ttyUSB*, сделал wvdial beeline и интернет подключился!!
Вот код:

root@debian:/home/mcs# wvdial beeline
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0
ATQ0 V1 E1 S0=0
OK
--> Sending: AT+CGDCONT=1,"IP","internet.beeline.ru"
AT+CGDCONT=1,"IP","internet.beeline.ru"
OK
--> Modem initialized.
--> Sending: ATM1L3DT*99#
--> Waiting for carrier.
ATM1L3DT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Mon Sep 26 10:33:28 2011
--> Pid of pppd: 1650
--> Using interface ppp0
--> pppd: ▒▒k[08]
--> pppd: ▒▒k[08]
--> pppd: ▒▒k[08]
--> pppd: ▒▒k[08]
--> pppd: ▒▒k[08]
--> pppd: ▒▒k[08]
--> local  IP address 10.217.х.х
--> pppd: ▒▒k[08]
--> remote IP address 10.64.х.х
--> pppd: ▒▒k[08]
--> primary   DNS address 212.44.х.х
--> pppd: ▒▒k[08]
--> secondary DNS address 217.118.х.х
--> pppd: ▒▒k[08]

^CCaught signal 2:  Attempting to exit gracefully...
--> Terminating on signal 15
--> pppd: ▒▒k[08]
--> Connect time 2.3 minutes.
--> pppd: ▒▒k[08]
--> pppd: ▒▒k[08]
--> pppd: ▒▒k[08]
--> Disconnecting at Mon Sep 26 10:35:44 2011

Но в этом режиме я ничего не могу сделать, нету командной строки (как будто линукс занят интернетом). Тоесть нужно сделать Ctrl + Z чтобы работать дальше. Почему так?

aliaksei1818 написал:

Покажите ls /etc/usb_modeswitch.d

root@debian:/home/mcs# ls /etc/usb_modeswitch.d
0421:060c              0af0:6971  0af0:d035  12d1:1003    19d2:0101
0421:0610              0af0:7011  0af0:d055  12d1:101e    19d2:0103
0421:0622              0af0:7031  0af0:d057  12d1:1031    19d2:0115
0421:0627              0af0:7051  0af0:d058  12d1:1414    19d2:1001
0471:1210              0af0:7071  0af0:d155  12d1:1446    19d2:1007
0471:1237              0af0:7111  0af0:d157  12d1:14ad    19d2:1009
0482:024d              0af0:7211  0af0:d255  12d1:14c1    19d2:1013
04e8:689a              0af0:7251  0af0:d257  12d1:1520    19d2:2000
04e8:f000              0af0:7271  0af0:d357  12d1:1521    19d2:fff5
057c:84ff              0af0:7301  0b3c:c700  12d1:1523    19d2:fff6
05c6:1000:sVe=Option   0af0:7311  0b3c:f000  12d1:1553    1a8d:1000
05c6:1000:uMa=AnyDATA  0af0:7361  0cf3:20ff  12d1:1557    1a8d:1000:uPr=5G
05c6:1000:uMa=Option   0af0:7381  0e8d:7109  12d1:1c0b    1ab7:5700
05c6:1000:uMa=SAMSUNG  0af0:7401  0fce:d0cf  1410:5010    1b7d:0700
05c6:1000:uMa=Vertex   0af0:7501  0fce:d0e1  1410:5020    1bbb:f000
05c6:2001              0af0:7601  0fce:d103  1410:5030    1c9e:1001
05c6:f000              0af0:7701  0fd1:1000  1410:5031    1c9e:9200
05c7:1000              0af0:7801  1004:1000  1410:5041    1c9e:9e00
072f:100d              0af0:7901  1004:607f  148f:2578    1c9e:f000
0930:0d46              0af0:8200  1004:613a  16d8:6281    1dd6:1000
0ace:2011              0af0:8201  1004:613f  16d8:6803    1e0e:f000
0ace:20ff              0af0:8300  1004:6190  16d8:6803:?  1edf:6003
0af0:6711              0af0:8302  1033:0035  16d8:700a    1ee8:0009
0af0:6731              0af0:8304  106c:3b03  16d8:f000    1ee8:0013
0af0:6751              0af0:8400  106c:3b05  198f:bccd    1f28:0021
0af0:6771              0af0:c031  106c:3b06  19d2:0003    1fac:0130
0af0:6791              0af0:c100  1076:7f40  19d2:0026    230d:0001
0af0:6811              0af0:d013  1199:0fff  19d2:0040
0af0:6911              0af0:d031  1266:1000  19d2:0053
0af0:6951              0af0:d033  12d1:1001  19d2:0083

Потом почему-то опять набираю wvdial beeline и пишет что "модем занят"

root@debian:/home/mcs# wvdial beeline
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttyUSB2: Device or resource busy
--> Cannot open /dev/ttyUSB2: Device or resource busy
--> Cannot open /dev/ttyUSB2: Device or resource busy

Из-за чего может быть?

Включение команда > /dev/null &
Выключение killall команда
Посмотреть, когда занят ps -e , найти wvdial и killall

Danila52 написал:

Включение команда > /dev/null &
Выключение killall команда
Посмотреть, когда занят ps -e , найти wvdial и killall

Можно поподробнее?

MCS написал:

[quote=Danila52]Включение команда > /dev/null &
Выключение killall команда
Посмотреть, когда занят ps -e , найти wvdial и killall

Можно поподробнее?[/quote]
Какой командой запускаешь wvdial, в конце команды добавляется строка > /dev/null & для подвления вывода консоли, а для остановки нужно killall wvdial.