Привет всем, значит что имеем:
1) Линукс дебиан сквиз 6.0.2.1
2) 3G WIFI ZTE HSDPA USB MODEM, model: MF626 (БиЛайн)
Задача: нужно сделать так, чтобы интернет автоматом подключался на этом модеме и раздавал всем локальным пользователям. Модем видется в системе. Стоит всего 1 сетевая карта (eth0) IP => 192.168.100.50 (у локальных юзеров 192.168.100.5 - 192.168.100.20)
Вот инфа
root@debian-server:/home/mcs# dmesg|grep usb
[ 2.139834] usbcore: registered new interface driver usbfs
[ 2.140837] usbcore: registered new interface driver hub
[ 2.141793] usbcore: registered new device driver usb
[ 2.287161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.287170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.287177] usb usb1: Product: UHCI Host Controller
[ 2.287184] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.287190] usb usb1: SerialNumber: 0000:00:1f.2
[ 2.298070] usb usb1: configuration #1 chosen from 1 choice
[ 2.299873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.299881] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.299889] usb usb2: Product: UHCI Host Controller
[ 2.299895] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.299901] usb usb2: SerialNumber: 0000:00:1f.4
[ 2.300621] usb usb2: configuration #1 chosen from 1 choice
[ 2.608068] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 2.776070] usb 1-1: New USB device found, idVendor=19d2, idProduct=2000
[ 2.776082] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.776089] usb 1-1: Product: ZTE CDMA Technologies MSM
[ 2.776096] usb 1-1: Manufacturer: ZTE, Incorporated
[ 2.776102] usb 1-1: SerialNumber: BLNMOP673M3MSTRG
[ 2.776408] usb 1-1: configuration #1 chosen from 1 choice
[ 2.816740] usbcore: registered new interface driver usb-storage
[ 2.817555] usb-storage: device found at 2
[ 2.817563] usb-storage: waiting for device to settle before scanning
[ 7.819156] usb-storage: device scan complete
[ 12.880279] usb 1-1: USB disconnect, address 2
[ 18.352046] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 18.518978] usb 1-1: New USB device found, idVendor=19d2, idProduct=2000
[ 18.518990] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 18.518997] usb 1-1: Product: ZTE CDMA Technologies MSM
[ 18.519003] usb 1-1: Manufacturer: ZTE, Incorporated
[ 18.519010] usb 1-1: SerialNumber: BLNMOP673M3MSTRG
[ 18.521927] usb 1-1: configuration #1 chosen from 1 choice
[ 18.529789] usb-storage: device found at 3
[ 18.529797] usb-storage: waiting for device to settle before scanning
[ 23.530851] usb-storage: device scan complete
root@debian-server:/home/mcs#
Не нашёл ничего путёвого, может плохо искал? Помогите, вообщем юзаю wvdial, отконфигурил файл wvdial.conf, модем приатачил на ttyUSB*, делаю коннект и пишет что-то вроде: "Modem hang up the phone бла бла бла, че-то там see var/log/messages". В чём может быть загвоздка? Кто сталкивался?
Парни, а если USB 1.1, это может в целом влять на работу модема? Потому как на другой системе с WinXP SP3 (Pentium lll, 800Mhz + 128Mb Ram) модем практически не работает (не подключается). На дебе тоже USB 1.1
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found devices in default mode or class (1)
Accessing device 003 on bus 001 ...
Using endpoints 0x01 (out) and 0x81 (in)
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
No driver found. Either detached before or never attached
SCSI inquiry data (for identification)
-------------------------
Vendor String: ZTE
Model String: USB SCSI CD-ROM
Revision String: 2.31
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: ZTE, Incorporated
Product: ZTE CDMA Technologies MSM
Serial No.: BLNMOP673M3MSTRG
-------------------------
Warning: no switching method given.
-> Run lsusb to note any changes. Bye.
root@debian:/home/mcs#
Вот данные с usb_modeswitch.conf
text
root@debian:/home/mcs# cat /etc/usb_modeswitch.conf
# Configuration for the usb_modeswitch package, a mode switching tool for
# USB devices providing multiple states or modes
#
# This file is evaluated by the wrapper script "usb_modeswitch_dispatcher"
# in /usr/sbin
# To enable an option, set it to "1", "yes" or "true" (case doesn't matter)
# Everything else counts as "disable"
# Disable automatic mode switching globally (e.g. to access the original
# install storage)
DisableSwitching=0
# Enable logging (results in a extensive report file in /var/log, named
# "usb_modeswitch_<interface-name>"
