Загрузчик и драйверы на видеокарту

[    0.189857] vgaarb: loaded
[    0.189941] SCSI subsystem initialized
[    0.190005] libata version 3.00 loaded.
[    0.190052] usbcore: registered new interface driver usbfs
[    0.190063] usbcore: registered new interface driver hub
[    0.190081] usbcore: registered new device driver usb
[    0.190164] ACPI: WMI: Mapper loaded
[    0.190165] PCI: Using ACPI for IRQ routing
[    0.190172] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[    0.190175] pci 0000:00:00.0: BAR 3: can't allocate resource
[    0.190294] NetLabel: Initializing
[    0.190296] NetLabel:  domain hash size = 128
[    0.190297] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.190307] NetLabel:  unlabeled traffic allowed by default
[    0.190333] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.190337] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.192022] Switching to clocksource tsc
[    0.193198] AppArmor: AppArmor Filesystem Enabled
[    0.193208] pnp: PnP ACPI init
[    0.193217] ACPI: bus type pnp registered
[    0.195967] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.195970] pnp 00:0c: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.195973] pnp 00:0c: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.195976] pnp 00:0c: mem resource (0x100000-0x7fffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[    0.196194] pnp: PnP ACPI: found 13 devices
[    0.196196] ACPI: ACPI bus type pnp unregistered
[    0.196198] PnPBIOS: Disabled by ACPI PNP
[    0.196208] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.196211] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.196216] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.196218] system 00:08: ioport range 0x40b-0x40b has been reserved
[    0.196220] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.196222] system 00:08: ioport range 0xc00-0xc01 has been reserved
[    0.196225] system 00:08: ioport range 0xc14-0xc14 has been reserved
[    0.196227] system 00:08: ioport range 0xc50-0xc51 has been reserved
[    0.196229] system 00:08: ioport range 0xc52-0xc52 has been reserved
[    0.196231] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[    0.196234] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[    0.196236] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[    0.196238] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[    0.196240] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[    0.196242] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[    0.196245] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[    0.196247] system 00:08: ioport range 0x800-0x89f has been reserved
[    0.196249] system 00:08: ioport range 0xb10-0xb1f has been reserved
[    0.196252] system 00:08: ioport range 0x900-0x90f has been reserved
[    0.196254] system 00:08: ioport range 0x910-0x91f has been reserved
[    0.196256] system 00:08: ioport range 0xfe00-0xfefe has been reserved
[    0.196259] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
[    0.196261] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[    0.196266] system 00:0a: ioport range 0xe00-0xe0f has been reserved
[    0.196268] system 00:0a: ioport range 0xe80-0xe8f has been reserved
[    0.196270] system 00:0a: ioport range 0xf40-0xf4f has been reserved
[    0.196273] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[    0.196277] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.196281] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.230917] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[    0.230920] pci 0000:00:02.0:   IO window: 0xe000-0xefff
[    0.230924] pci 0000:00:02.0:   MEM window: 0xfea00000-0xfeafffff
[    0.230927] pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.230931] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[    0.230933] pci 0000:00:06.0:   IO window: disabled
[    0.230936] pci 0000:00:06.0:   MEM window: 0xfeb00000-0xfebfffff
[    0.230939] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.230942] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[    0.230944] pci 0000:00:14.4:   IO window: disabled
[    0.230949] pci 0000:00:14.4:   MEM window: disabled
[    0.230953] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.230966] pci 0000:00:02.0: setting latency timer to 64
[    0.230972] pci 0000:00:06.0: setting latency timer to 64
[    0.230980] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.230982] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.230985] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
[    0.230987] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
[    0.230989] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.230991] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[    0.230994] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.230996] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[    0.231026] NET: Registered protocol family 2
[    0.231101] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.231338] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.231837] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.232072] TCP: Hash tables configured (established 131072 bind 65536)
[    0.232074] TCP reno registered
[    0.232139] NET: Registered protocol family 1
[    0.335560] pci 0000:01:00.0: Boot video device
[    0.335730] cpufreq-nforce2: No nForce2 chipset.
[    0.335749] Scanning for low memory corruption every 60 seconds
[    0.335821] audit: initializing netlink socket (disabled)
[    0.335830] type=2000 audit(1280611833.335:1): initialized
[    0.342288] highmem bounce pool size: 64 pages
[    0.342292] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.343310] VFS: Disk quotas dquot_6.5.2
[    0.343353] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.343761] fuse init (API version 7.13)
[    0.343820] msgmni has been set to 1690
[    0.343977] alg: No test for stdrng (krng)
[    0.344018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.344021] io scheduler noop registered
[    0.344022] io scheduler anticipatory registered
[    0.344024] io scheduler deadline registered
[    0.344052] io scheduler cfq registered (default)
[    0.344152]   alloc irq_desc for 24 on node -1
[    0.344153]   alloc kstat_irqs on node -1
[    0.344161] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[    0.344167] pcieport 0000:00:02.0: setting latency timer to 64
[    0.344241]   alloc irq_desc for 25 on node -1
[    0.344242]   alloc kstat_irqs on node -1
[    0.344246] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X
[    0.344251] pcieport 0000:00:06.0: setting latency timer to 64
[    0.344300] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.344317] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.344393] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.344401] ACPI: Power Button [PWRB]
[    0.344432] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.344435] ACPI: Power Button [PWRF]
[    0.344685] ACPI: duty_cycle spans bit 4
[    0.344703] processor LNXCPU:00: registered as cooling_device0
[    0.344728] processor LNXCPU:01: registered as cooling_device1
[    0.347090] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.347198] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.347468] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.348140] brd: module loaded
[    0.348427] loop: module loaded
[    0.348479] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.348570]   alloc irq_desc for 16 on node -1
[    0.348571]   alloc kstat_irqs on node -1
[    0.348576] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.348602] pata_acpi 0000:00:14.1: setting latency timer to 64
[    0.348802] Fixed MDIO Bus: probed
[    0.348825] PPP generic driver version 2.4.2
[    0.348850] tun: Universal TUN/TAP device driver, 1.6
[    0.348851] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.348901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.348916]   alloc irq_desc for 19 on node -1
[    0.348918]   alloc kstat_irqs on node -1
[    0.348921] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.348931] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    0.348951] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[    0.348970] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    0.348986] ehci_hcd 0000:00:13.5: debug port 1
[    0.349005] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe9ff000
[    0.349041] isapnp: Scanning for PnP cards...
[    0.366671] Freeing initrd memory: 7788k freed
[    0.375687] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    0.375826] usb usb1: configuration #1 chosen from 1 choice
[    0.375849] hub 1-0:1.0: USB hub found
[    0.375857] hub 1-0:1.0: 10 ports detected
[    0.375930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.375951] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.375967] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.375995] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    0.376021] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe9fe000
[    0.435713] usb usb2: configuration #1 chosen from 1 choice
[    0.435729] hub 2-0:1.0: USB hub found
[    0.435737] hub 2-0:1.0: 2 ports detected
[    0.435776]   alloc irq_desc for 17 on node -1
[    0.435778]   alloc kstat_irqs on node -1
[    0.435782] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.435790] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.435811] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    0.435828] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe9fd000
[    0.495706] usb usb3: configuration #1 chosen from 1 choice
[    0.495722] hub 3-0:1.0: USB hub found
[    0.495728] hub 3-0:1.0: 2 ports detected
[    0.495761]   alloc irq_desc for 18 on node -1
[    0.495762]   alloc kstat_irqs on node -1
[    0.495765] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.495773] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    0.495794] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    0.495809] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe9fc000
[    0.555709] usb usb4: configuration #1 chosen from 1 choice
[    0.555726] hub 4-0:1.0: USB hub found
[    0.555733] hub 4-0:1.0: 2 ports detected
[    0.555765] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.555772] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    0.555793] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[    0.555803] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe9fb000
[    0.615712] usb usb5: configuration #1 chosen from 1 choice
[    0.615730] hub 5-0:1.0: USB hub found
[    0.615737] hub 5-0:1.0: 2 ports detected
[    0.615769] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.615776] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    0.615795] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[    0.615806] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe9fa000
[    0.675720] usb usb6: configuration #1 chosen from 1 choice
[    0.675736] hub 6-0:1.0: USB hub found
[    0.675743] hub 6-0:1.0: 2 ports detected
[    0.675777] uhci_hcd: USB Universal Host Controller Interface driver
[    0.675839] PNP: No PS/2 controller found. Probing ports directly.
[    0.676194] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.676200] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.676254] mice: PS/2 mouse device common for all mice
[    0.676323] rtc_cmos 00:02: RTC can wake from S4
[    0.676348] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.676373] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.676449] device-mapper: uevent: version 1.0.3
[    0.676533] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.676577] device-mapper: multipath: version 1.1.0 loaded
[    0.676580] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.676661] EISA: Probing bus 0 at eisa.0
[    0.676698] EISA: Detected 0 cards.
[    0.676745] cpuidle: using governor ladder
[    0.676746] cpuidle: using governor menu
[    0.677058] TCP cubic registered
[    0.677160] NET: Registered protocol family 10
[    0.677492] lo: Disabled Privacy Extensions
[    0.677719] NET: Registered protocol family 17
[    0.677744] powernow-k8: Found 1 AMD Athlon(tm) 7850 Dual-Core Processor processors (2 cpu cores) (version 2.20.00)
[    0.677753] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    0.677754] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    0.677770] Using IPI No-Shortcut mode
[    0.677816] PM: Resume from disk failed.
[    0.677826] registered taskstats version 1
[    0.678085]   Magic number: 2:44:552
[    0.678124] pci_link PNP0C0F:03: hash matches
[    0.678164] rtc_cmos 00:02: setting system clock to 2010-07-31 21:30:34 UTC (1280611834)
[    0.678167] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.678168] EDD information not available.
[    0.702950] isapnp: No Plug & Play device found
[    0.702970] Freeing unused kernel memory: 660k freed
[    0.703294] Write protecting the kernel text: 4680k
[    0.703320] Write protecting the kernel read-only data: 1840k
[    0.714477] udev: starting version 151
[    0.780460] atl1 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.780468] atl1 0000:02:00.0: setting latency timer to 64
[    0.780486] atl1 0000:02:00.0: version 2.1.3
[    0.786847] Floppy drive(s): fd0 is 1.44M
[    0.792412] scsi0 : pata_atiixp
[    0.794040] scsi1 : pata_atiixp
[    0.794993] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    0.794996] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    0.795030] ahci 0000:00:12.0: version 3.0
[    0.795049]   alloc irq_desc for 22 on node -1
[    0.795052]   alloc kstat_irqs on node -1
[    0.795058] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.795088] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    0.795192] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    0.795195] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc 
[    0.795448] scsi2 : ahci
[    0.795510] scsi3 : ahci
[    0.795557] scsi4 : ahci
[    0.795597] scsi5 : ahci
[    0.796267] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 22
[    0.796270] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 22
[    0.796273] ata5: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 22
[    0.796277] ata6: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 22
[    0.799698] usb 1-9: new high speed USB device using ehci_hcd and address 4
[    0.808015] FDC 0 is a post-1991 82077
[    0.933559] usb 1-9: configuration #1 chosen from 1 choice
[    0.938687] Initializing USB Mass Storage driver...
[    0.938774] scsi6 : SCSI emulation for USB Mass Storage devices
[    0.938834] usbcore: registered new interface driver usb-storage
[    0.938836] USB Mass Storage support registered.
[    0.938840] usb-storage: device found at 4
[    0.938841] usb-storage: waiting for device to settle before scanning
[    0.964002] ata1.00: HPA unlocked: 312579695 -> 312581808, native 312581808
[    0.964006] ata1.00: ATA-7: SAMSUNG SP1634N, UZ100-03, max UDMA/100
[    0.964009] ata1.00: 312581808 sectors, multi 16: LBA48 
[    0.980110] ata1.00: configured for UDMA/100
[    0.980191] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP1634N  UZ10 PQ: 0 ANSI: 5
[    0.980308] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.980343] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    0.980490] sd 0:0:0:0: [sda] Write Protect is off
[    0.980493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.980506] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.980595]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.043375] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.164009] usb 3-2: new low speed USB device using ohci_hcd and address 2
[    1.264008] ata3: softreset failed (device not ready)
[    1.264011] ata6: softreset failed (device not ready)
[    1.264014] ata6: applying SB600 PMP SRST workaround and retrying
[    1.264016] ata3: applying SB600 PMP SRST workaround and retrying
[    1.264037] ata4: softreset failed (device not ready)
[    1.264039] ata5: softreset failed (device not ready)
[    1.264042] ata5: applying SB600 PMP SRST workaround and retrying
[    1.264044] ata4: applying SB600 PMP SRST workaround and retrying
[    1.332771] usb 3-2: configuration #1 chosen from 1 choice
[    1.428026] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.428030] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.428058] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.428060] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.428349] ata3.00: ATAPI: ASUS    DRW-2014L1T, 1.02, max UDMA/66, ATAPI AN
[    1.428363] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.428794] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.428796] ata3.00: configured for UDMA/66
[    1.428811] ata4.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133
[    1.428813] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.428827] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.429367] scsi 2:0:0:0: CD-ROM            ASUS     DRW-2014L1T      1.02 PQ: 0 ANSI: 5
[    1.429385] ata6.00: ATA-6: ST3120827AS, 3.42, max UDMA/133
[    1.429388] ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.429402] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.429698] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.429700] ata4.00: configured for UDMA/133
[    1.430980] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.430982] ata6.00: configured for UDMA/133
[    1.432168] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.432171] Uniform CD-ROM driver Revision: 3.20
[    1.432238] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.432280] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.432383] scsi 3:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[    1.432497] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.432522] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.432575] sd 3:0:0:0: [sdb] Write Protect is off
[    1.432577] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.432592] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.432669]  sdb: sdb1
[    1.447592] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.453361] ata5.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
[    1.453364] ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.453378] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.454269] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.454271] ata5.00: configured for UDMA/133
[    1.454315] scsi 4:0:0:0: Direct-Access     ATA      WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
[    1.454412] sd 4:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.454415] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    1.454493] scsi 5:0:0:0: Direct-Access     ATA      ST3120827AS      3.42 PQ: 0 ANSI: 5
[    1.454566] sd 5:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.454582] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    1.454593] sd 5:0:0:0: [sdd] Write Protect is off
[    1.454595] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.454618] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.454625] sd 4:0:0:0: [sdc] Write Protect is off
[    1.454627] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.454645] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.454707]  sdd:
[    1.454747]  sdc: sdd1 sdd2 < sdc1
[    1.461143] sd 4:0:0:0: [sdc] Attached SCSI disk
[    1.472007] usb 4-1: new low speed USB device using ohci_hcd and address 2
[    1.472793]  sdd5 sdd6 >
[    1.479970] sd 5:0:0:0: [sdd] Attached SCSI disk
[    1.483650] usbcore: registered new interface driver hiddev
[    1.483694] usbcore: registered new interface driver usbhid
[    1.483696] usbhid: v2.6:USB HID core driver
[    1.490869] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input3
[    1.490944] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:13.1-2/input0
[    1.646817] usb 4-1: configuration #1 chosen from 1 choice
[    1.654940] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input4
[    1.655000] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.2-1/input0
[    1.663988] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.1/input/input5
[    1.664052] generic-usb 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.2-1/input1
[    1.928009] usb 6-2: new full speed USB device using ohci_hcd and address 2
[    2.032957] EXT4-fs (sda8): mounted filesystem with ordered data mode
[    2.102825] usb 6-2: configuration #1 chosen from 1 choice
[    5.916339] usb-storage: device scan complete
[    5.916823] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer           4.05 PQ: 0 ANSI: 2
[    5.917135] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    5.917683] sd 6:0:0:0: [sde] 16055949 512-byte logical blocks: (8.22 GB/7.65 GiB)
[    5.918178] sd 6:0:0:0: [sde] Write Protect is off
[    5.918180] sd 6:0:0:0: [sde] Mode Sense: 03 00 00 00
[    5.918182] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    5.920177] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    5.920180]  sde: sde1 sde2 < sde5 >
[    5.922559] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    5.922562] sd 6:0:0:0: [sde] Attached SCSI removable disk
[   17.372387] udev: starting version 151
[   17.378004] Adding 4578484k swap on /dev/sda7.  Priority:-1 extents:1 across:4578484k 
[   17.590229] type=1505 audit(1280601051.409:2):  operation="profile_load" pid=690 name="/sbin/dhclient3"
[   17.590431] type=1505 audit(1280601051.409:3):  operation="profile_load" pid=690 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   17.590543] type=1505 audit(1280601051.409:4):  operation="profile_load" pid=690 name="/usr/lib/connman/scripts/dhclient-script"
[   17.744317] Linux agpgart interface v0.103
[   17.774820] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   17.952958] Bluetooth: Core ver 2.15
[   17.953005] NET: Registered protocol family 31
[   17.953006] Bluetooth: HCI device and connection manager initialized
[   17.953009] Bluetooth: HCI socket layer initialized
[   17.956624] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   17.956716] usbcore: registered new interface driver btusb
[   18.065832] vga16fb: initializing
[   18.065836] vga16fb: mapped to 0xc00a0000
[   18.065889] fb0: VGA16 VGA frame buffer device
[   18.272408] lp: driver loaded but no devices found
[   18.680616] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   18.680621] Disabling lock debugging due to kernel taint
[   18.773853] type=1505 audit(1280601052.593:5):  operation="profile_load" pid=957 name="/usr/share/gdm/guest-session/Xsession"
[   18.776956] type=1505 audit(1280601052.597:6):  operation="profile_replace" pid=959 name="/sbin/dhclient3"
[   18.777161] type=1505 audit(1280601052.597:7):  operation="profile_replace" pid=959 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.777275] type=1505 audit(1280601052.597:8):  operation="profile_replace" pid=959 name="/usr/lib/connman/scripts/dhclient-script"
[   18.779789] type=1505 audit(1280601052.597:9):  operation="profile_load" pid=961 name="/usr/bin/evince"
[   18.783200] type=1505 audit(1280601052.601:10):  operation="profile_load" pid=961 name="/usr/bin/evince-previewer"
[   18.785082] type=1505 audit(1280601052.605:11):  operation="profile_load" pid=961 name="/usr/bin/evince-thumbnailer"
[   18.786566] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[   18.786698] [fglrx]   vendor: 1002 device: 9460 count: 1
[   18.786932] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[   18.786946] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   18.786951] pci 0000:01:00.0: setting latency timer to 64
[   18.787087] [fglrx] Kernel PAT support is enabled
[   18.787106] [fglrx] module loaded - fglrx 8.72.11 [Apr  8 2010] with 1 minors
[   18.825652]   alloc irq_desc for 26 on node -1
[   18.825655]   alloc kstat_irqs on node -1
[   18.825668] atl1 0000:02:00.0: irq 26 for MSI/MSI-X
[   18.825722] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[   19.036059] Console: switching to colour frame buffer device 80x30
[   19.345194] Bluetooth: L2CAP ver 2.14
[   19.345198] Bluetooth: L2CAP socket layer initialized
[   19.372572] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.372575] Bluetooth: BNEP filters: protocol multicast
[   19.420555] ppdev: user-space parallel port driver
[   19.546171] Bridge firewalling registered
[   19.591268] Bluetooth: SCO (Voice Link) ver 0.6
[   19.591271] Bluetooth: SCO socket layer initialized
[   19.637383] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.679265] CPU0 attaching NULL sched-domain.
[   19.679271] CPU1 attaching NULL sched-domain.
[   19.704556] CPU0 attaching sched-domain:
[   19.704559]  domain 0: span 0-1 level MC
[   19.704561]   groups: 0 1
[   19.704566] CPU1 attaching sched-domain:
[   19.704567]  domain 0: span 0-1 level MC
[   19.704569]   groups: 1 0
[   19.719622] hda_codec: ALC883: BIOS auto-probing.
[   19.721047] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[   19.730890] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   19.730916] HDA Intel 0000:01:00.1: setting latency timer to 64
[   19.876395]   alloc irq_desc for 27 on node -1
[   19.876398]   alloc kstat_irqs on node -1
[   19.876408] fglrx_pci 0000:01:00.0: irq 27 for MSI/MSI-X
[   19.876913] [fglrx] Firegl kernel thread PID: 1343
[   19.877105] [fglrx] IRQ 27 Enabled
[   19.946680] Bluetooth: RFCOMM TTY layer initialized
[   19.946684] Bluetooth: RFCOMM socket layer initialized
[   19.946686] Bluetooth: RFCOMM ver 1.11
[   20.896519] [fglrx] Gart USWC size:627 M.
[   20.896522] [fglrx] Gart cacheable size:247 M.
[   20.896527] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   20.896529] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000 
[   20.896532] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000 
[   23.269333] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   23.708746] CPU0 attaching NULL sched-domain.
[   23.708752] CPU1 attaching NULL sched-domain.
[   23.740550] CPU0 attaching sched-domain:
[   23.740552]  domain 0: span 0-1 level MC
[   23.740555]   groups: 0 1
[   23.740558] CPU1 attaching sched-domain:
[   23.740560]  domain 0: span 0-1 level MC
[   23.740562]   groups: 1 0
[   24.591040] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   29.220016] eth0: no IPv6 routers present