LinuxForum.Fans
Тема

Разрешение экрана

Автор: Lost 36 сообщений 2909 просмотров
31.01.2015 12:21 #412256

Поменял видеокарту из доступных разрешений только 1360х768 а у меня монитор с разрешением 1920х1080.
Я пробывал прописывать разрешение с помощью xrandr но вот результат:

Показать
[console]name@Kubuntu:~$ xrandr
Screen 0: minimum 8 x 8, current 1360 x 768, maximum 8192 x 8192
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1360x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0 +
1360x768 60.0* 59.8
1152x864 60.0
800x600 72.2 60.3 56.2
680x384 60.0 59.8
640x480 59.9
512x384 60.0
400x300 72.2
320x240 60.1
TV-0 disconnected (normal left inverted right x axis y axis)
DVI-I-2 disconnected (normal left inverted right x axis y axis)
DVI-I-3 disconnected (normal left inverted right x axis y axis)
name@Kubuntu:~$ cvt 1920 1080 60
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
name@Kubuntu:~$ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
name@Kubuntu:~$ xrandr --addmode DVI-I-1 1920x1080_60.00
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
[/console]
31.01.2015 12:30 · отредактировано #412260

Телепаты вчера перебрали и ушли похмеляться
_____________________________________________
Система???
[console]#uname -a
[/console]
Какая видеокарта?
[console]lspci -k |grep VGA -A3[/console]
Как это все настраивали?
[console]# cat /etc/X11/xorg.conf
# cat /etc/X11/xorg.conf.d/*device*
# cat /etc/X11/xorg.conf.d/*monitor*[/console]

01.02.2015 06:56 · отредактировано #412377

[console]root@Kubuntu:/home/user# uname -a
Linux Kubuntu 3.13.0-44-generic #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
root@Kubuntu:/home/user# lspci -k |grep VGA -A3
01:00.0 VGA compatible controller: NVIDIA Corporation G92 [GeForce 9800 GT] (rev a2)
Subsystem: XFX Pine Group Inc. Device 2372
Kernel driver in use: nvidia
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
[/console]
У меня нету xorg.conf но если надо могу сконфигурировать.

01.02.2015 07:45 #412381

"Lost" написал:
У меня нету xorg.conf
а в /etc/X11/xorg.conf.d/ тоже ничего нет?
01.02.2015 18:20 · отредактировано #412410
drBatty написал:
а в /etc/X11/xorg.conf.d/ тоже ничего нет?

Да,тоже пусто.

01.02.2015 18:59 #412414

модуль видеокарты nouveau?
дайте вывод

text
lsmod

с открытым модулем были проблемы. попробуйте установить блоб от НВИДИА...
Там с ним ставится программа для настройки видяхи и в ней можно выбрать верное разрешение. именно так я для своей видяхи смог 1600на1200на75 установить...

01.02.2015 19:10 · отредактировано #412415

Харитон, Там блоб стоит...) пруф в сообщении 3
Lost, Слепи xorg.conf....

На тебе мой, для примера....

text
Section "ServerLayout"
    Identifier "xbmc"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse2" "CorePointer"
    Screen 0  "Screen0" 0 0
EndSection

Section "Files"
    FontPath "/usr/share/fonts/default/Type1"
EndSection


Section "ServerFlags"
    Option "Xinerama" "0"
 Option "AllowMouseOpenFail" "true" 
 Option "AllowEmptyInput" "true" 
EndSection


Section "InputDevice"
    Identifier "Keyboard0"
    Driver "evdev"
    Option "Device" "/dev/input/by-path/platform-i8042-serio-0-event-kbd"
   Option         "CoreKeyboard"
   Option         "XkbRules" "xorg"
EndSection


Section "InputDevice" 
 Identifier "Mouse2" 
 Driver "evdev" 
 Option "Device" "/dev/input/by-id/usb-PHILIPS_OVU710023-event-mouse"  
 Option "GrabDevice" "on" 
EndSection


Section "Monitor"
 Identifier "Monitor0"                                                                                                                                               
 VendorName "Unknown"                                                                                                                                                
 ModelName "LG W2241"                                                                                                                                                
 HorizSync 30.0 - 83.0                                                                                                                                               
 VertRefresh 56.0 - 75.0                                                                                                                                             
 Option "DPMS" "falce"                                                                                                                                               
EndSection                                                                                                                                                              
                                                                                                                                                                        
Section "Device"                                                                                                                                                        
 Identifier "Videocard0"                                                                                                                                             
 VendorName "NVIDIA Corporation"                                                                                                                                     
 BoardName "GeForce 7600GS"                                                                                                                                          
 Driver "nvidia"                                                                                                                                                     
 Screen 0                                                                                                                                                            
 BusID "PCI:1:0:0"                                                                                                                                                   
EndSection                                                                                                                                                              
                                                                                                                                                                        
Section "Screen"                                                                                                                                                        
    Identifier "Screen0"                                                                                                                                                
    Device "Videocard0"                                                                                                                                                 
    Monitor "Monitor0"
    DefaultDepth 24
        Subsection "Display"
            Depth 24
            Modes "1920x1080"
        EndSubsection
#    Option "TwinViewXineramaInfoOrder" "CRT-0"
    Option "TwinView" "0"
01.02.2015 19:15 · отредактировано #412417

ну если блоб, то запустите нвидиа-конфигуратор - не помню как он звется, что у него в настройках есть?

блоб стоит, а может пользуется ноувеау? Так как ксорг.конфа нет, то ядро скорее всего установит свой модуль, если он не забанен, чем внешний...
дайте вывод

text
lsmod
01.02.2015 19:18 · отредактировано #412418
"Харитон" написал:
то запустите нвидиа-конфигуратор

nvidia-xconfig
...Но не знаю у кого как, а у меня он ниразу иксы не смог поднять =)

"Харитон" написал:
а может пользуется ноувеау?

Та вродь :

text
  Kernel driver in use: nvidia

Lost, Посмотреть бы еще на:
cat /var/log/Xorg.0.log

01.02.2015 19:35 #412419

xorg.conf

Показать
[console]# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 331.20 (buildd@roseapple) Mon Feb 3 15:07:22 UTC 2014

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.125 (buildmeister@swio-display-x64-rhel04-14) Mon Dec 1 21:18:22 PST 2014

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9800 GT"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-1"
Option "metamodes" "1920x1080 +0+0 {viewportin=1920x1080}"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection

[/console]

lsmod

Показать
[console]user@Kubuntu:~$ lsmod
Module Size Used by
pppoe 17873 2
pppox 13342 1 pppoe
rfcomm 69160 0
bnep 19624 2
bluetooth 391136 10 bnep,rfcomm
binfmt_misc 17468 1
nfsd 280289 2
auth_rpcgss 59338 1 nfsd
nfs_acl 12837 1 nfsd
nfs 236726 0
lockd 93977 2 nfs,nfsd
sunrpc 289260 6 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 63988 1 nfs
eeepc_wmi 13151 0
asus_wmi 24191 1 eeepc_wmi
sparse_keymap 13948 1 asus_wmi
nvidia 11360265 41
x86_pkg_temp_thermal 14205 0
intel_powerclamp 14705 0
coretemp 13435 0
drm 303102 1 nvidia
kvm_intel 143187 0
kvm 455835 1 kvm_intel
crct10dif_pclmul 14289 0
crc32_pclmul 13113 0
ghash_clmulni_intel 13216 0
aesni_intel 55624 0
aes_x86_64 17131 1 aesni_intel
lrw 13286 1 aesni_intel
gf128mul 14951 1 lrw
glue_helper 13990 1 aesni_intel
ablk_helper 13597 1 aesni_intel
cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper
serio_raw 13462 0
snd_hda_codec_realtek 65580 1
snd_hda_intel 56451 4
snd_hda_codec 192906 2 snd_hda_codec_realtek,snd_hda_intel
lpc_ich 21080 0
snd_hwdep 13602 1 snd_hda_codec
snd_pcm 102099 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_rawmidi 30144 1 snd_seq_midi
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
snd 69322 18 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
wmi 19177 1 asus_wmi
mei_me 18627 0
mac_hid 13205 0
mei 82276 1 mei_me
soundcore 12680 1 snd
parport_pc 32701 1
ppdev 17671 0
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
uvesafb 28686 1
psmouse 106714 0
r8169 67581 0
ahci 25819 2
mii 13934 1 r8169
libahci 32716 1 ahci
video 19476 1 asus_wmi
[/console]

Xorg.0.log

Показать
[console]user@Kubuntu:~$ cat /var/log/Xorg.0.log
[ 51514.095]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 51514.095] X Protocol Version 11, Revision 0
[ 51514.095] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[ 51514.095] Current Operating System: Linux Kubuntu 3.13.0-44-generic #73-Ubuntu SMP Tue Dec 16 00:22:43 UTC 2014 x86_64
[ 51514.095] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=520c5520-e4ca-47c2-bab0-3cb5420e9639 ro quiet splash nomodeset video=uvesafb:mode_option=1600x1200-24,mtrr=3,scroll=ywrap
[ 51514.095] Build Date: 10 December 2014 06:15:52PM
[ 51514.095] xorg-server 2:1.15.1-0ubuntu2.6 (For technical support please see http://www.ubuntu.com/support)
[ 51514.095] Current version of pixman: 0.30.2
[ 51514.095] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 51514.095] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 51514.095] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 2 00:25:33 2015
[ 51514.110] (==) Using config file: "/etc/X11/xorg.conf"
[ 51514.110] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 51514.151] (==) ServerLayout "Layout0"
[ 51514.151] (**) |-->Screen "Screen0" (0)
[ 51514.151] (**) | |-->Monitor "Monitor0"
[ 51514.151] (**) | |-->Device "Device0"
[ 51514.151] (**) |-->Input Device "Keyboard0"
[ 51514.151] (**) |-->Input Device "Mouse0"
[ 51514.151] (**) Option "Xinerama" "0"
[ 51514.152] (==) Automatically adding devices
[ 51514.152] (==) Automatically enabling devices
[ 51514.152] (==) Automatically adding GPU devices
[ 51514.152] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 51514.152] Entry deleted from font path.
[ 51514.152] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 51514.152] Entry deleted from font path.
[ 51514.152] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 51514.152] Entry deleted from font path.
[ 51514.152] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 51514.152] Entry deleted from font path.
[ 51514.152] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 51514.152] Entry deleted from font path.
[ 51514.152] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 51514.152] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 51514.152] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 51514.152] (WW) Disabling Keyboard0
[ 51514.152] (WW) Disabling Mouse0
[ 51514.152] (II) Loader magic: 0x7fe3e65c6d40
[ 51514.152] (II) Module ABI versions:
[ 51514.152] X.Org ANSI C Emulation: 0.4
[ 51514.152] X.Org Video Driver: 15.0
[ 51514.152] X.Org XInput driver : 20.0
[ 51514.152] X.Org Server Extension : 8.0
[ 51514.152] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 51514.153] (--) PCI:*(0:1:0:0) 10de:0605:1682:2372 rev 162, Mem @ 0xf6000000/16777216, 0xc0000000/536870912, 0xf4000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 51514.153] Initializing built-in extension Generic Event Extension
[ 51514.153] Initializing built-in extension SHAPE
[ 51514.153] Initializing built-in extension MIT-SHM
[ 51514.153] Initializing built-in extension XInputExtension
[ 51514.153] Initializing built-in extension XTEST
[ 51514.153] Initializing built-in extension BIG-REQUESTS
[ 51514.153] Initializing built-in extension SYNC
[ 51514.153] Initializing built-in extension XKEYBOARD
[ 51514.153] Initializing built-in extension XC-MISC
[ 51514.153] Initializing built-in extension SECURITY
[ 51514.153] Initializing built-in extension XINERAMA
[ 51514.153] Initializing built-in extension XFIXES
[ 51514.153] Initializing built-in extension RENDER
[ 51514.153] Initializing built-in extension RANDR
[ 51514.153] Initializing built-in extension COMPOSITE
[ 51514.153] Initializing built-in extension DAMAGE
[ 51514.153] Initializing built-in extension MIT-SCREEN-SAVER
[ 51514.153] Initializing built-in extension DOUBLE-BUFFER
[ 51514.153] Initializing built-in extension RECORD
[ 51514.153] Initializing built-in extension DPMS
[ 51514.153] Initializing built-in extension Present
[ 51514.153] Initializing built-in extension DRI3
[ 51514.153] Initializing built-in extension X-Resource
[ 51514.153] Initializing built-in extension XVideo
[ 51514.153] Initializing built-in extension XVideo-MotionCompensation
[ 51514.153] Initializing built-in extension SELinux
[ 51514.153] Initializing built-in extension XFree86-VidModeExtension
[ 51514.153] Initializing built-in extension XFree86-DGA
[ 51514.153] Initializing built-in extension XFree86-DRI
[ 51514.153] Initializing built-in extension DRI2
[ 51514.153] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 51514.153] (II) "glx" will be loaded by default.
[ 51514.153] (WW) "xmir" is not to be loaded by default. Skipping.
[ 51514.153] (II) LoadModule: "glx"
[ 51514.172] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 51514.260] (II) Module glx: vendor="NVIDIA Corporation"
[ 51514.260] compiled for 4.0.2, module version = 1.0.0
[ 51514.260] Module class: X.Org Server Extension
[ 51514.260] (II) NVIDIA GLX Module 304.125 Mon Dec 1 20:22:48 PST 2014
[ 51514.260] Loading extension GLX
[ 51514.260] (II) LoadModule: "nvidia"
[ 51514.260] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 51514.275] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 51514.275] compiled for 4.0.2, module version = 1.0.0
[ 51514.275] Module class: X.Org Video Driver
[ 51514.275] (II) NVIDIA dlloader X Driver 304.125 Mon Dec 1 20:00:30 PST 2014
[ 51514.275] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 51514.275] (++) using VT number 7

[ 51514.665] (II) Loading sub module "fb"
[ 51514.665] (II) LoadModule: "fb"
[ 51514.673] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 51514.678] (II) Module fb: vendor="X.Org Foundation"
[ 51514.678] compiled for 1.15.1, module version = 1.0.0
[ 51514.678] ABI class: X.Org ANSI C Emulation, version 0.4
[ 51514.678] (II) Loading sub module "wfb"
[ 51514.678] (II) LoadModule: "wfb"
[ 51514.679] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 51514.681] (II) Module wfb: vendor="X.Org Foundation"
[ 51514.681] compiled for 1.15.1, module version = 1.0.0
[ 51514.681] ABI class: X.Org ANSI C Emulation, version 0.4
[ 51514.681] (II) Loading sub module "ramdac"
[ 51514.681] (II) LoadModule: "ramdac"
[ 51514.681] (II) Module "ramdac" already built-in
[ 51514.681] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 51514.681] (==) NVIDIA(0): RGB weight 888
[ 51514.681] (==) NVIDIA(0): Default visual is TrueColor
[ 51514.681] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 51514.681] (**) NVIDIA(0): Option "Stereo" "0"
[ 51514.681] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[ 51514.681] (**) NVIDIA(0): Option "SLI" "Off"
[ 51514.681] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 51514.681] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 51514.681] (**) NVIDIA(0): Stereo disabled by request
[ 51514.681] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 51514.681] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 51514.681] (**) NVIDIA(0): Option "MetaModes" "1920x1080 +0+0 {viewportin=1920x1080}"
[ 51514.681] (**) NVIDIA(0): Enabling 2D acceleration
[ 51515.048] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51515.050] (II) NVIDIA(0): NVIDIA GPU GeForce 9800 GT (G92) at PCI:1:0:0 (GPU-0)
[ 51515.050] (--) NVIDIA(0): Memory: 524288 kBytes
[ 51515.050] (--) NVIDIA(0): VideoBIOS: 62.92.46.00.03
[ 51515.050] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 51515.050] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 51515.053] (--) NVIDIA(0): Valid display device(s) on GeForce 9800 GT at PCI:1:0:0
[ 51515.053] (--) NVIDIA(0): CRT-0
[ 51515.053] (--) NVIDIA(0): CRT-1 (connected)
[ 51515.053] (--) NVIDIA(0): TV-0
[ 51515.053] (--) NVIDIA(0): DFP-0
[ 51515.053] (--) NVIDIA(0): DFP-1
[ 51515.053] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 51515.053] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 51515.053] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 51515.053] (--) NVIDIA(0): TV encoder: Unknown
[ 51515.053] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 51515.053] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 51515.053] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 51515.053] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 51515.053] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51515.053] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51515.053] (**) NVIDIA(0): all display devices.)
[ 51515.055] (WW) NVIDIA(0): No valid modes for "1920x1080+0+0{viewportin=1920x1080}";
[ 51515.055] (WW) NVIDIA(0): removing.
[ 51515.055] (WW) NVIDIA(0):
[ 51515.055] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 51515.055] (WW) NVIDIA(0): "nvidia-auto-select".
[ 51515.055] (WW) NVIDIA(0):
[ 51515.055] (II) NVIDIA(0): Validated MetaModes:
[ 51515.055] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 51515.055] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 51515.081] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 51515.081] (WW) NVIDIA(0): from CRT-1's EDID.
[ 51515.081] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 51515.081] (--) Depth 24 pixmap format is 32 bpp
[ 51515.081] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 51515.087] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 51515.116] Loading extension NV-GLX
[ 51515.127] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 51515.127] (==) NVIDIA(0): Backing store enabled
[ 51515.127] (==) NVIDIA(0): Silken mouse enabled
[ 51515.128] (**) NVIDIA(0): DPMS enabled
[ 51515.128] Loading extension NV-CONTROL
[ 51515.128] Loading extension XINERAMA
[ 51515.128] (II) Loading sub module "dri2"
[ 51515.128] (II) LoadModule: "dri2"
[ 51515.128] (II) Module "dri2" already built-in
[ 51515.128] (II) NVIDIA(0): [DRI2] Setup complete
[ 51515.128] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 51515.128] (--) RandR disabled
[ 51515.131] (II) SELinux: Disabled on system
[ 51515.131] (II) Initializing extension GLX
[ 51515.170] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 51515.180] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 51515.180] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 51515.180] (II) LoadModule: "evdev"
[ 51515.180] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 51515.194] (II) Module evdev: vendor="X.Org Foundation"
[ 51515.194] compiled for 1.15.0, module version = 2.8.2
[ 51515.194] Module class: X.Org XInput Driver
[ 51515.194] ABI class: X.Org XInput driver, version 20.0
[ 51515.194] (II) Using input driver 'evdev' for 'Power Button'
[ 51515.194] (**) Power Button: always reports core events
[ 51515.194] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 51515.194] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 51515.194] (--) evdev: Power Button: Found keys
[ 51515.194] (II) evdev: Power Button: Configuring as keyboard
[ 51515.194] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 51515.194] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 51515.194] (**) Option "xkb_rules" "evdev"
[ 51515.194] (**) Option "xkb_model" "pc105"
[ 51515.194] (**) Option "xkb_layout" "us,ru"
[ 51515.194] (**) Option "xkb_variant" ","
[ 51515.194] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 51515.195] (II) XKB: reuse xkmfile /var/lib/xkb/server-5BD46092C922CD443B4EABE4B26B5EFCDED629BD.xkm
[ 51515.209] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 51515.209] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 51515.209] (II) Using input driver 'evdev' for 'Power Button'
[ 51515.209] (**) Power Button: always reports core events
[ 51515.209] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 51515.209] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 51515.209] (--) evdev: Power Button: Found keys
[ 51515.209] (II) evdev: Power Button: Configuring as keyboard
[ 51515.209] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 51515.209] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 51515.209] (**) Option "xkb_rules" "evdev"
[ 51515.209] (**) Option "xkb_model" "pc105"
[ 51515.209] (**) Option "xkb_layout" "us,ru"
[ 51515.209] (**) Option "xkb_variant" ","
[ 51515.209] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 51515.209] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 51515.209] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 51515.209] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 51515.209] (II) No input driver specified, ignoring this device.
[ 51515.209] (II) This device may have been added with another device file.
[ 51515.209] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 51515.209] (II) No input driver specified, ignoring this device.
[ 51515.209] (II) This device may have been added with another device file.
[ 51515.209] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 51515.209] (II) No input driver specified, ignoring this device.
[ 51515.209] (II) This device may have been added with another device file.
[ 51515.209] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event5)
[ 51515.210] (II) No input driver specified, ignoring this device.
[ 51515.210] (II) This device may have been added with another device file.
[ 51515.210] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event4)
[ 51515.210] (II) No input driver specified, ignoring this device.
[ 51515.210] (II) This device may have been added with another device file.
[ 51515.210] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
[ 51515.210] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 51515.210] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 51515.210] (**) Eee PC WMI hotkeys: always reports core events
[ 51515.210] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
[ 51515.210] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 51515.210] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 51515.210] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 51515.210] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event9"
[ 51515.210] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 8)
[ 51515.210] (**) Option "xkb_rules" "evdev"
[ 51515.210] (**) Option "xkb_model" "pc105"
[ 51515.210] (**) Option "xkb_layout" "us,ru"
[ 51515.210] (**) Option "xkb_variant" ","
[ 51515.210] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 51515.210] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 51515.210] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 51515.210] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 51515.210] (**) AT Translated Set 2 keyboard: always reports core events
[ 51515.210] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 51515.210] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 51515.210] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 51515.210] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 51515.210] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 51515.210] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 51515.210] (**) Option "xkb_rules" "evdev"
[ 51515.210] (**) Option "xkb_model" "pc105"
[ 51515.210] (**) Option "xkb_layout" "us,ru"
[ 51515.210] (**) Option "xkb_variant" ","
[ 51515.210] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 51515.210] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3)
[ 51515.210] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 51515.210] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 51515.210] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 51515.210] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3"
[ 51515.210] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 51515.210] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 51515.210] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 51515.210] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 51515.210] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 51515.210] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 51515.210] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 51515.210] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 51515.210] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 51515.210] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event3"
[ 51515.210] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 51515.210] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 51515.210] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 51515.210] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 51515.210] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 51515.210] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 51515.211] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 51515.211] (II) No input driver specified, ignoring this device.
[ 51515.211] (II) This device may have been added with another device file.
[ 51519.089] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51519.089] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51519.089] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51519.089] (**) NVIDIA(0): all display devices.)
[ 51519.239] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51519.239] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51519.239] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51519.239] (**) NVIDIA(0): all display devices.)
[ 51519.709] (II) XKB: reuse xkmfile /var/lib/xkb/server-6E7162FDA2016B0C16416E91772C8EE206FAAF65.xkm
[ 51519.972] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51519.972] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51519.972] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51519.972] (**) NVIDIA(0): all display devices.)
[ 51520.335] (II) NVIDIA(0): Setting mode "DVI-I-1: 1360x768 @1360x768 +0+0"
[ 51520.406] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51520.406] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51520.406] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51520.406] (**) NVIDIA(0): all display devices.)
[ 51520.440] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51520.440] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51520.440] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51520.440] (**) NVIDIA(0): all display devices.)
[ 51520.473] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51520.473] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51520.473] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51520.473] (**) NVIDIA(0): all display devices.)
[ 51520.507] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51520.507] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51520.507] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51520.507] (**) NVIDIA(0): all display devices.)
[ 51529.298] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51529.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51529.298] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51529.298] (**) NVIDIA(0): all display devices.)
[ 51559.600] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 51559.600] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51559.600] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51559.600] (**) NVIDIA(0): all display devices.)[/console]
01.02.2015 19:41 · отредактировано #412420

Lost, Сделай так:

text
Section "Screen"
  Identifier "Screen0"
  Device "Device0"
  Monitor "Monitor0"
  DefaultDepth 24
    Subsection "Display"
      Depth 24
      Modes "1920x1080"
    EndSubsection
  Option "TwinView" "0"
EndSection

..а то оно на вот это: "metamodes" "1920x1080 +0+0 {viewportin=1920x1080}" оно неадекватно реагирует...

01.02.2015 19:54 · отредактировано #412421

Lost, удалите сам xorg.conf, а затем выполните в консоли из-под рута "nvidia-xconfig" перезагрузитесь и посмотрите что получится.

01.02.2015 20:04 #412422
kirillov3798 написал:
Lost, удалите сам xorg.conf, а затем выполните в консоли из-под рута "nvidia-xconfig" перезагрузитесь и посмотрите что получится.

Стало ещё хуже разрешение снизелось до 800х600.

01.02.2015 20:12 #412424

"Lost" написал:
Стало ещё хуже разрешение снизелось до 800х600.
Что сейчас в xorg.conf??
02.02.2015 10:54 #412500

Lost, xorg.conf новый-то сгенерировали при помощи nvidia-xconfig? А если при помощи nvidia-settings?

02.02.2015 11:11 · отредактировано #412503

kirillov3798,
Идентичная дрянь, сегодня пол ночи жевали... Карта не получает конфиг моника по EDID...

"Xorg.0.log" написал:
[ 51515.053] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 51515.053] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 51515.053] (**) NVIDIA(0): all display devices.)
[ 51515.055] (WW) NVIDIA(0): No valid modes for "1920x1080+0+0{viewportin=1920x1080}";
[ 51515.055] (WW) NVIDIA(0): removing.
[ 51515.055] (WW) NVIDIA(0):
[ 51515.055] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 51515.055] (WW) NVIDIA(0): "nvidia-auto-select".
[ 51515.055] (WW) NVIDIA(0):
[ 51515.055] (II) NVIDIA(0): Validated MetaModes:
[ 51515.055] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 51515.055] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 51515.081] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 51515.081] (WW) NVIDIA(0): from CRT-1's EDID.

....ща попробую у себя такую ошибку замутить...
UPD
Не получилось =(
У меня оно EDID нормально цепляет, хоть убейся.....

Показать
text
[    85.291] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    85.291] (**) NVIDIA(0):     device LG Electronics W2241 (CRT-1) (Using EDID
[    85.291] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    88.652] (II) NVIDIA(GPU-0): Display (LG Electronics W2241 (CRT-1)) does not support NVIDIA
[    88.652] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    88.652] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    88.652] (**) NVIDIA(0):     device LG Electronics W2241 (CRT-1) (Using EDID
[    88.652] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)

Из вариантов:
В Section "Device" вписать:

text
    Option "IgnoreEDID" "1"
    Option "UseEdidFreqs" "0"

и в Section "Screen"

text
Subsection "Display"
      Depth 24
      Modes "1920x1080@60"
EndSubsection

.....появится ТС соседней темы - посмотрим на реакцию всего этого...

"s.xbatob" написал:
переходники...)
Вполне даже может быть... Переходников DVI-VGA несколько видов есть... И не все они однинаково работают...
02.02.2015 11:14 #412504

Похоже, ваш монитор о себе неверную информацию сообщает (или вообще молчит, или она не доходит до адаптера - кабель, переходники...)
К сожалению драйвер NVIDIA про мониторы сообщает нечленораздельно, но всё равно стоит покопаться в /var/log/Xorg.0.log
Если это так, то придётся секцию для монитора прописывать явно.

02.02.2015 16:00 #412573

Lost, забудьте всё, что пытается сообщить монитор. Выкиньте всё, что говорит о РАЗРЕШЕНИИ ЭКРАНА.

Пропишите две строки, циферки возьмите из интернета - реальные параметры монитора и пропишите в /etc/X11/xorg.conf

HorizSync

VertRefresh

Больше не нужно ничего.

Далее настройте разрешение монитора штатными настройками Убунты.

02.02.2015 23:11 #412654

Lost,

"stranger" написал:
Lost, забудьте всё, что пытается сообщить монитор. Выкиньте всё, что говорит о РАЗРЕШЕНИИ ЭКРАНА.
Пропишите две строки, циферки возьмите из интернета - реальные параметры монитора и пропишите в /etc/X11/xorg.conf
HorizSync
VertRefresh
Больше не нужно ничего.
Далее настройте разрешение монитора штатными настройками Убунты.

Замечание верное. Не первая уже тема на форуме по этой проблеме.
з.ы. у меня такие:

text
ModelName "BenQ EW2420"
    HorizSync 24-83
    VertRefresh 50-76
03.02.2015 04:28 #412720
"verg" написал:
Не первая уже тема на форуме по этой проблеме.

Может быть стОит вынести в особое для всех, если уж так популярно? (А оно на самом деле сверхпопулярно!)

Войдите или зарегистрируйтесь, чтобы ответить.