Система не видит флешку

palionyi@palionyi-desktop ~ $ lsusb Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 011: ID 8564:1000 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

palionyi@palionyi-desktop ~ $ lsusb Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[25863.088024] usb 1-10: new high speed USB device using ehci_hcd and address 25 [25863.222234] usb 1-10: configuration #1 chosen from 1 choice
[25863.222552] scsi20 : SCSI emulation for USB Mass Storage devices
[25863.222691] usb-storage: device found at 25
[25863.222693] usb-storage: waiting for device to settle before scanning
[25868.220247] usb-storage: device scan complete
[25868.601996] scsi 20:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 4
[25868.604231] sd 20:0:0:0: Attached scsi generic sg3 type 0
[25868.604967] sd 20:0:0:0: [sdd] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
[25868.605587] sd 20:0:0:0: [sdd] Write Protect is off
[25868.605591] sd 20:0:0:0: [sdd] Mode Sense: 43 00 00 00
[25868.605593] sd 20:0:0:0: [sdd] Assuming drive cache: write through
[25868.607832] sd 20:0:0:0: [sdd] Assuming drive cache: write through
[25868.607836] sdd: sdd1
[25868.611834] sd 20:0:0:0: [sdd] Assuming drive cache: write through
[25868.611839] sd 20:0:0:0: [sdd] Attached SCSI removable disk
palionyi@palionyi-desktop ~ $

[26010.902987] usb 1-10: USB disconnect, address 25 [26022.112022] usb 1-10: new high speed USB device using ehci_hcd and address 26
[26022.245066] usb 1-10: configuration #1 chosen from 1 choice
[26024.594752] usb 1-10: USB disconnect, address 26
[26025.204105] usb 1-10: new high speed USB device using ehci_hcd and address 27
[26025.337570] usb 1-10: configuration #1 chosen from 3 choices
[26025.341286] scsi21 : SCSI emulation for USB Mass Storage devices
[26025.344251] usb-storage: device found at 27
[26025.344254] usb-storage: waiting for device to settle before scanning
[26030.344245] usb-storage: device scan complete
[26030.344732] scsi 21:0:0:0: Direct-Access Nokia Nokia 311 0000 PQ: 0 ANSI: 4
[26030.346732] sd 21:0:0:0: Attached scsi generic sg3 type 0
[26030.347463] sd 21:0:0:0: [sdd] Adjusting the sector count from its reported value: 7698433
[26030.347470] sd 21:0:0:0: [sdd] 7698432 512-byte logical blocks: (3.94 GB/3.67 GiB)
[26030.347958] sd 21:0:0:0: [sdd] Write Protect is off
[26030.347961] sd 21:0:0:0: [sdd] Mode Sense: 04 00 00 00
[26030.347963] sd 21:0:0:0: [sdd] Assuming drive cache: write through
[26030.354214] sd 21:0:0:0: [sdd] Adjusting the sector count from its reported value: 7698433
[26030.354710] sd 21:0:0:0: [sdd] Assuming drive cache: write through
[26030.354715] sdd: sdd1
[26030.358593] sd 21:0:0:0: [sdd] Adjusting the sector count from its reported value: 7698433
[26030.361325] sd 21:0:0:0: [sdd] Assuming drive cache: write through
[26030.361332] sd 21:0:0:0: [sdd] Attached SCSI removable disk

sudo mount /dev/sdd1 /mnt

sudo umount /mnt

 [    1.491403] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.491423] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.491509] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[    1.491690] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.491699] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.491707] usb usb3: Product: UHCI Host Controller
[    1.491715] usb usb3: Manufacturer: Linux 3.13.0-33-generic uhci_hcd
[    1.491723] usb usb3: SerialNumber: 0000:00:1d.1
[    1.492140] hub 3-0:1.0: USB hub found
[    1.492170] hub 3-0:1.0: 2 ports detected
[    1.492808] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.492827] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.492914] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[    1.493097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.493106] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.493114] usb usb4: Product: UHCI Host Controller
[    1.493122] usb usb4: Manufacturer: Linux 3.13.0-33-generic uhci_hcd
[    1.493129] usb usb4: SerialNumber: 0000:00:1d.2
[    1.493536] hub 4-0:1.0: USB hub found
[    1.493572] hub 4-0:1.0: 2 ports detected
[    1.494243] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.494263] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.494348] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[    1.494529] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.494539] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.494547] usb usb5: Product: UHCI Host Controller
[    1.494554] usb usb5: Manufacturer: Linux 3.13.0-33-generic uhci_hcd
[    1.494562] usb usb5: SerialNumber: 0000:00:1d.3
[    1.494960] hub 5-0:1.0: USB hub found
[    1.494989] hub 5-0:1.0: 2 ports detected
[    1.495565] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.503353] i8042: Detected active multiplexing controller, rev 1.1
[    1.506874] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.506896] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.506994] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.507088] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.507174] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.507606] mousedev: PS/2 mouse device common for all mice
[    1.508289] rtc_cmos 00:02: RTC can wake from S4
[    1.508568] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.508624] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.508901] device-mapper: uevent: version 1.0.3
[    1.509118] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.509202] platform eisa.0: Probing EISA bus 0
[    1.509213] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.509224] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.509234] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.509243] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.509253] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.509262] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.509272] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.509282] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.509291] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.509299] platform eisa.0: EISA: Detected 0 cards
[    1.509317] cpufreq-nforce2: No nForce2 chipset.
[    1.509327] ledtrig-cpu: registered to indicate activity on CPUs
[    1.509782] TCP: cubic registered
[    1.510175] NET: Registered protocol family 10
[    1.510854] NET: Registered protocol family 17
[    1.510889] Key type dns_resolver registered
[    1.511420] Using IPI No-Shortcut mode
[    1.511708] Loading compiled-in X.509 certificates
[    1.526120] Loaded X.509 cert 'Magrathea: Glacier signing key: 1e07541713fc095ef1ff17f9dfa0d59913c08790'
[    1.526160] registered taskstats version 1
[    1.535362] Key type trusted registered
[    1.541387] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.544420] Key type encrypted registered
[    1.559363] AppArmor: AppArmor sha1 policy hashing enabled
[    1.559374] IMA: No TPM chip found, activating TPM-bypass!
[    1.559957] regulator-dummy: disabling
[    1.560150]   Magic number: 2:925:881
[    1.560320] rtc_cmos 00:02: setting system clock to 2014-10-20 10:51:28 UTC (1413802288)
[    1.562063] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.562071] EDD information not available.
[    1.562234] PM: Hibernation image not present or could not be loaded.
[    1.766612] isapnp: No Plug & Play device found
[    1.767427] Freeing unused kernel memory: 880K (c19fb000 - c1ad7000)
[    1.767599] Write protecting the kernel text: 6740k
[    1.767786] Write protecting the kernel read-only data: 2836k
[    1.767792] NX-protecting the kernel data: 5548k
[    1.800215] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    1.814045] udevd[95]: starting version 175
[    1.945332] usb 1-5: New USB device found, idVendor=19d2, idProduct=2003
[    1.945347] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.945356] usb 1-5: Product: ZTE WCDMA Technologies MSM
[    1.945365] usb 1-5: Manufacturer: ZTE,Incorporated
[    1.945374] usb 1-5: SerialNumber: P673A4MTSD010000
[    2.060134] usb 1-7: new high-speed USB device number 3 using ehci-pci
[    2.196806] usb 1-7: New USB device found, idVendor=8086, idProduct=0180
[    2.196820] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.196829] usb 1-7: Product: Intel(R) WiMAX Link 5150
[    2.196837] usb 1-7: Manufacturer: Intel(R) Corporation
[    2.206801] ahci 0000:00:1f.2: version 3.0
[    2.207330] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    2.207445] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.207508] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    2.207523] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part 
[    2.214132] scsi0 : ahci
[    2.215338] scsi1 : ahci
[    2.216371] scsi2 : ahci
[    2.216737] scsi3 : ahci
[    2.216953] ata1: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444100 irq 43
[    2.216964] ata2: DUMMY
[    2.216974] ata3: SATA max UDMA/133 abar m1024@0x56444000 port 0x56444200 irq 43
[    2.216980] ata4: DUMMY
[    2.329154] usb-storage 1-5:1.4: USB Mass Storage device detected
[    2.329402] scsi4 : usb-storage 1-5:1.4
[    2.329716] usbcore: registered new interface driver usb-storage
[    2.536178] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.539059] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.539330] ata1.00: ATA-8: WDC WD5000BPKX-75HPJT0, 01.01A01, max UDMA/133
[    2.539347] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.542445] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.542714] ata1.00: configured for UDMA/133
[    2.543165] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPKX-7 01.0 PQ: 0 ANSI: 5
[    2.543868] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.544243] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.544256] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.544542] sd 0:0:0:0: [sda] Write Protect is off
[    2.544552] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.544666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.579471]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    2.581245] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.864178] ata3: SATA link down (SStatus 0 SControl 300)
[    3.331455] scsi 4:0:0:0: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[    3.332553] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    3.341415] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.802265] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.195653] random: init urandom read with 115 bits of entropy available
[    4.354263] random: nonblocking pool is initialized
[    4.752994] init: ureadahead main process (276) terminated with status 5
[    5.352268] Adding 1035260k swap on /dev/sda6.  Priority:-1 extents:1 across:1035260k FS
[    5.799397] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.909698] udevd[353]: starting version 175
[    6.273893] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[    6.533200] lp: driver loaded but no devices found
[    6.587163] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    6.726020] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[    6.743673] acpi device:1f: registered as cooling_device2
[    6.744237] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    7.006359] wmi: Mapper loaded
[    7.173899] cfg80211: Calling CRDA to update world regulatory domain
[    7.634377] type=1400 audit(1413802294.571:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=637 comm="apparmor_parser"
[    7.634402] type=1400 audit(1413802294.571:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
[    7.634422] type=1400 audit(1413802294.571:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
[    7.636894] type=1400 audit(1413802294.575:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
[    7.636928] type=1400 audit(1413802294.575:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
[    7.638827] type=1400 audit(1413802294.575:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
[    7.779276] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    7.779287] Copyright(c) 2003-2013 Intel Corporation
[    7.779662] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.779782] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
[    7.974500] [drm] Initialized drm 1.1.0 20060810
[    8.053426] intel_rng: FWH not detected
[    8.249203] acerhdf: Acer Aspire One Fan driver, v.0.5.26
[    8.249238] acerhdf: unknown (unsupported) BIOS version Acer/AO531h/v0.3118, please report, aborting!
[    8.438029] iwlwifi 0000:02:00.0: loaded firmware version 8.24.2.2 op_mode iwldvm
[    8.534733] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMBA 1 (20131115/utaddress-251)
[    8.534758] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.534879] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.534897] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.534906] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.534920] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.534928] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.696274] ppdev: user-space parallel port driver
[    8.994243] leds_ss4200: no LED devices found
[    9.021676] usbcore: registered new interface driver usbserial
[    9.021939] usbcore: registered new interface driver usbserial_generic
[    9.024424] usbserial: USB Serial support registered for generic
[    9.083385] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    9.083399] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    9.083408] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    9.083418] iwlwifi 0000:02:00.0: Detected Intel(R) WiMAX/WiFi Link 5150 ABG, REV=0x44
[    9.092512] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    9.354070] [drm] Memory usable by graphics device = 256M
[    9.354087] checking generic (40000000 1e0000) vs hw (40000000 10000000)
[    9.354095] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    9.354196] Console: switching to colour dummy device 80x25
[    9.366787] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.408585] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.408596] [drm] Driver supports precise vblank timestamp query.
[    9.408814] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.547765] init: failsafe main process (790) killed by TERM signal
[    9.573286] usbcore: registered new interface driver option
[    9.573358] usbserial: USB Serial support registered for GSM modem (1-port)
[    9.573830] option 1-5:1.0: GSM modem (1-port) converter detected
[    9.592078] Bluetooth: Core ver 2.17
[    9.592157] NET: Registered protocol family 31
[    9.592165] Bluetooth: HCI device and connection manager initialized
[    9.592187] Bluetooth: HCI socket layer initialized
[    9.592202] Bluetooth: L2CAP socket layer initialized
[    9.592226] Bluetooth: SCO socket layer initialized
[    9.643435] [drm] initialized overlay support
[    9.671189] type=1400 audit(1413802296.607:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=825 comm="apparmor_parser"
[    9.671219] type=1400 audit(1413802296.607:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=825 comm="apparmor_parser"
[    9.672886] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
[    9.673176] option 1-5:1.1: GSM modem (1-port) converter detected
[    9.673963] type=1400 audit(1413802296.611:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=825 comm="apparmor_parser"
[    9.720191] Bluetooth: RFCOMM TTY layer initialized
[    9.720225] Bluetooth: RFCOMM socket layer initialized
[    9.720244] Bluetooth: RFCOMM ver 1.11
[    9.725894] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 568746
[    9.735415] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
[    9.735981] option 1-5:1.2: GSM modem (1-port) converter detected
[    9.739135] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
[    9.739424] option 1-5:1.3: GSM modem (1-port) converter detected
[    9.747251] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB3
[    9.785619] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[    9.800158] i2400m_usb 1-7:1.0: WiMAX interface wmx0 (00:1d:e1:16:df:bd) ready
[    9.890265] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.890275] Bluetooth: BNEP filters: protocol multicast
[    9.890298] Bluetooth: BNEP socket layer initialized
[   10.050928] acer_wmi: Acer Laptop ACPI-WMI Extras
[   10.075920] fbcon: inteldrmfb (fb0) is primary device
[   10.142615] acer_wmi: Function bitmap for Communication Device: 0x7
[   10.142632] acer_wmi: Brightness must be controlled by acpi video driver
[   10.192577] input: Acer BMA150 accelerometer as /devices/virtual/input/input14
[   10.367448] Console: switching to colour frame buffer device 128x37
[   10.402449] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.402459] i915 0000:00:02.0: registered panic notifier
[   10.408128] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.568332] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   10.775188] SKU: Nid=0x1d sku_cfg=0x4016892d
[   10.775199] SKU: port_connectivity=0x1
[   10.775204] SKU: enable_pcbeep=0x1
[   10.775217] SKU: check_sum=0x00000006
[   10.775222] SKU: customization=0x00000089
[   10.775233] SKU: external_amp=0x5
[   10.775238] SKU: platform_type=0x1
[   10.775243] SKU: swap=0x0
[   10.775248] SKU: override=0x1
[   10.775452] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.775461]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.775469]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.775475]    mono: mono_out=0x0
[   10.775480]    inputs:
[   10.775486]      Mic=0x18
[   10.775493]      Internal Mic=0x12
[   10.775500] realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d
[   10.775508] realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272
[   10.786292] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   10.787061] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   12.367530] type=1400 audit(1413802299.303:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1025 comm="apparmor_parser"
[   12.643769] audit_printk_skb: 24 callbacks suppressed
[   12.643783] type=1400 audit(1413802299.579:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1033 comm="apparmor_parser"
[   12.661280] i2400m_usb 1-7:1.0: firmware interface version 9.3.2
[   12.666021] type=1400 audit(1413802299.603:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1028 comm="apparmor_parser"
[   12.666044] type=1400 audit(1413802299.603:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="launchpad_integration" pid=1028 comm="apparmor_parser"
[   12.666059] type=1400 audit(1413802299.603:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1028 comm="apparmor_parser"
[   12.666074] type=1400 audit(1413802299.603:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=1028 comm="apparmor_parser"
[   12.666088] type=1400 audit(1413802299.603:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="launchpad_integration" pid=1028 comm="apparmor_parser"
[   12.666104] type=1400 audit(1413802299.603:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1028 comm="apparmor_parser"
[   12.666119] type=1400 audit(1413802299.603:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1028 comm="apparmor_parser"
[   12.666134] type=1400 audit(1413802299.603:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1028 comm="apparmor_parser"
[   12.670352] usbcore: registered new interface driver i2400m_usb
[   12.700896] type=1400 audit(1413802299.639:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="launchpad_integration" pid=1028 comm="apparmor_parser"
[   12.872216] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.874003] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.882445] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   12.885529] iwlwifi 0000:02:00.0: Radio type=0x1-0x1-0x0
[   13.011279] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   13.014376] iwlwifi 0000:02:00.0: Radio type=0x1-0x1-0x0
[   13.045456] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.046414] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.057981] IPv6: ADDRCONF(NETDEV_UP): wmx0: link is not ready
[   13.060168] IPv6: ADDRCONF(NETDEV_UP): wmx0: link is not ready
[   17.305059] init: plymouth-stop pre-start process (1534) terminated with status 1
[   21.029054] wlan0: authenticate with fc:75:16:c6:1a:20
[   21.039419] wlan0: send auth to fc:75:16:c6:1a:20 (try 1/3)
[   21.041291] wlan0: authenticated
[   21.044674] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   21.048411] wlan0: associate with fc:75:16:c6:1a:20 (try 1/3)
[   21.051041] wlan0: RX AssocResp from fc:75:16:c6:1a:20 (capab=0x411 status=0 aid=1)
[   21.052603] wlan0: associated
[   21.052698] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   45.382685] audit_printk_skb: 102 callbacks suppressed
[   45.382700] type=1400 audit(1413802332.319:64): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2110 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   76.369340] wlan0: deauthenticating from fc:75:16:c6:1a:20 by local choice (reason=3)
[   76.393958] cfg80211: Calling CRDA for country: RU
[   89.491122] perf samples too long (2543 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  132.847477] wlan0: authenticate with cc:5d:4e:ff:e5:cc
[  132.852837] wlan0: send auth to cc:5d:4e:ff:e5:cc (try 1/3)
[  132.854711] wlan0: authenticated
[  132.867223] wlan0: waiting for beacon from cc:5d:4e:ff:e5:cc
[  132.924093] wlan0: associate with cc:5d:4e:ff:e5:cc (try 1/3)
[  132.931484] wlan0: RX AssocResp from cc:5d:4e:ff:e5:cc (capab=0x411 status=0 aid=1)
[  132.932936] wlan0: associated
[  139.179339] wlan0: deauthenticated from cc:5d:4e:ff:e5:cc (Reason: 15)
[  139.199154] cfg80211: Calling CRDA to update world regulatory domain
[  142.573279] wlan0: authenticate with cc:5d:4e:ff:e5:cc
[  142.574742] wlan0: send auth to cc:5d:4e:ff:e5:cc (try 1/3)
[  142.580107] wlan0: authenticated
[  142.584126] wlan0: associate with cc:5d:4e:ff:e5:cc (try 1/3)
[  142.589300] wlan0: RX AssocResp from cc:5d:4e:ff:e5:cc (capab=0x411 status=0 aid=1)
[  142.592133] wlan0: associated
[  148.908155] wlan0: deauthenticated from cc:5d:4e:ff:e5:cc (Reason: 15)
[  148.926983] cfg80211: Calling CRDA to update world regulatory domain
[  152.300353] wlan0: authenticate with cc:5d:4e:ff:e5:cc
[  152.303704] wlan0: send auth to cc:5d:4e:ff:e5:cc (try 1/3)
[  152.305585] wlan0: authenticated
[  152.316114] wlan0: associate with cc:5d:4e:ff:e5:cc (try 1/3)
[  152.318878] wlan0: RX AssocResp from cc:5d:4e:ff:e5:cc (capab=0x411 status=0 aid=1)
[  152.320267] wlan0: associated
[  158.637797] wlan0: deauthenticated from cc:5d:4e:ff:e5:cc (Reason: 15)
[  158.653767] cfg80211: Calling CRDA for country: TW
[  161.927500] wlan0: authenticate with cc:5d:4e:ff:e5:cc
[  161.929118] wlan0: send auth to cc:5d:4e:ff:e5:cc (try 1/3)
[  161.931027] wlan0: authenticated
[  161.936103] wlan0: associate with cc:5d:4e:ff:e5:cc (try 1/3)
[  161.944086] wlan0: RX AssocResp from cc:5d:4e:ff:e5:cc (capab=0x411 status=0 aid=1)
[  161.946755] wlan0: associated
[  168.261513] wlan0: deauthenticated from cc:5d:4e:ff:e5:cc (Reason: 15)
[  168.287172] cfg80211: Calling CRDA to update world regulatory domain
[  171.655492] wlan0: authenticate with cc:5d:4e:ff:e5:cc
[  171.660804] wlan0: send auth to cc:5d:4e:ff:e5:cc (try 1/3)
[  171.662637] wlan0: authenticated
[  171.672156] wlan0: associate with cc:5d:4e:ff:e5:cc (try 1/3)
[  171.674967] wlan0: RX AssocResp from cc:5d:4e:ff:e5:cc (capab=0x411 status=0 aid=1)
[  171.676409] wlan0: associated
[  178.092227] wlan0: deauthenticated from cc:5d:4e:ff:e5:cc (Reason: 15)
[  178.114938] cfg80211: Calling CRDA for country: TW
[  181.484293] wlan0: authenticate with cc:5d:4e:ff:e5:cc
[  181.489265] wlan0: send auth to cc:5d:4e:ff:e5:cc (try 1/3)
[  181.491145] wlan0: authenticated
[  181.504086] wlan0: associate with cc:5d:4e:ff:e5:cc (try 1/3)
[  181.506907] wlan0: RX AssocResp from cc:5d:4e:ff:e5:cc (capab=0x411 status=0 aid=1)
[  181.508761] wlan0: associated
[  187.727227] wlan0: deauthenticated from cc:5d:4e:ff:e5:cc (Reason: 15)
[  187.743056] cfg80211: Calling CRDA to update world regulatory domain
[  193.389619] perf samples too long (5018 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[  195.512157] usb 1-1: new high-speed USB device number 4 using ehci-pci
[  195.678266] usb 1-1: New USB device found, idVendor=04f2, idProduct=b175
[  195.678281] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[  195.678290] usb 1-1: Product: CNF9011
[  195.678299] usb 1-1: Manufacturer: Chicony Electronics Co., Ltd.
[  195.678306] usb 1-1: SerialNumber: SN0001
[  195.928402] Linux video capture interface: v2.00
[  196.030153] uvcvideo: Found UVC 1.00 device CNF9011 (04f2:b175)
[  196.039298] usb 1-1: USB disconnect, device number 4
[  196.041514] uvcvideo: Failed to set UVC probe control : -71 (exp. 26).
[  196.041540] uvcvideo: Failed to query (129) UVC probe control : -19 (exp. 26).
[  196.041548] uvcvideo: Failed to initialize the device (-5).
[  196.042869] usbcore: registered new interface driver uvcvideo
[  196.042880] USB Video Class driver (1.1.1)
[  196.500160] usb 1-1: new high-speed USB device number 6 using ehci-pci
[  196.832177] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[  196.979261] usb 2-1: not running at top speed; connect to a high speed hub
[  197.041244] usb 2-1: New USB device found, idVendor=04f2, idProduct=b175
[  197.041260] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[  197.041270] usb 2-1: Product: CNF9011
[  197.041279] usb 2-1: Manufacturer: Chicony Electronics Co., Ltd.
[  197.041288] usb 2-1: SerialNumber: SN0001
[  197.049632] uvcvideo: Found UVC 1.00 device CNF9011 (04f2:b175)
[  197.067737] input: CNF9011 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input17
[  206.326422] wlan0: authenticate with fc:75:16:c6:1a:20
[  206.329301] wlan0: send auth to fc:75:16:c6:1a:20 (try 1/3)
[  206.334079] wlan0: authenticated
[  206.339621] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[  206.341459] wlan0: associate with fc:75:16:c6:1a:20 (try 1/3)
[  206.344171] wlan0: RX AssocResp from fc:75:16:c6:1a:20 (capab=0x411 status=0 aid=1)
[  206.347269] wlan0: associated
[  208.325889] type=1400 audit(1413802495.260:65): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=856 comm="cupsd" capability=36  capname="block_suspend"
[  218.502892] wlan0: deauthenticating from fc:75:16:c6:1a:20 by local choice (reason=3)
[  218.532298] cfg80211: Calling CRDA to update world regulatory domain
[  223.666277] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  223.682872] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[  223.686483] iwlwifi 0000:02:00.0: Radio type=0x1-0x1-0x0
[  223.721865] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  223.730571] IPv6: ADDRCONF(NETDEV_UP): wmx0: link is not ready
[  231.923099] wlan0: authenticate with fc:75:16:c6:1a:20
[  231.926905] wlan0: send auth to fc:75:16:c6:1a:20 (try 1/3)
[  231.929837] wlan0: authenticated
[  231.936522] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[  231.940541] wlan0: associate with fc:75:16:c6:1a:20 (try 1/3)
[  231.944248] wlan0: RX AssocResp from fc:75:16:c6:1a:20 (capab=0x411 status=0 aid=1)
[  231.946750] wlan0: associated
[  231.946865] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  236.428636] PPP BSD Compression module registered
[  236.467342] PPP Deflate Compression module registered
[  258.092343] usb 2-1: USB disconnect, device number 2
[  325.550300] wlan0: deauthenticating from fc:75:16:c6:1a:20 by local choice (reason=3)
[  325.561684] cfg80211: Calling CRDA for country: TW
[  615.524180] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[  615.648139] usb 3-1: device descriptor read/64, error -71
[  615.876148] usb 3-1: device descriptor read/64, error -71
[  616.092158] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[  616.216157] usb 3-1: device descriptor read/64, error -71
[  616.444140] usb 3-1: device descriptor read/64, error -71
[  616.660152] usb 3-1: new full-speed USB device number 4 using uhci_hcd
[  617.072100] usb 3-1: device not accepting address 4, error -71
[  617.184155] usb 3-1: new full-speed USB device number 5 using uhci_hcd
[  617.596099] usb 3-1: device not accepting address 5, error -71
[  617.596186] hub 3-0:1.0: unable to enumerate USB device on port 1
[  621.204203] usb 3-1: new full-speed USB device number 6 using uhci_hcd
[  622.512179] usb 3-1: new full-speed USB device number 7 using uhci_hcd
[  622.636137] usb 3-1: device descriptor read/64, error -71
[  622.864129] usb 3-1: device descriptor read/64, error -71
[  623.080135] usb 3-1: new full-speed USB device number 8 using uhci_hcd
[  623.204300] usb 3-1: device descriptor read/64, error -71
[  623.432140] usb 3-1: device descriptor read/64, error -71
[  623.648141] usb 3-1: new full-speed USB device number 9 using uhci_hcd
[  624.064084] usb 3-1: device not accepting address 9, error -71
[  624.176139] usb 3-1: new full-speed USB device number 10 using uhci_hcd
[  624.592076] usb 3-1: device not accepting address 10, error -71
[  624.592158] hub 3-0:1.0: unable to enumerate USB device on port 1