Вечер добрый, у меня стоит несколько систем, вот решил попробовать Mint 15 xfce, понравилось, даже магее изменил :) хотя на мандриве с 2007 года, но вот сегодня пришла новая видяха, раньше стояла radeon hd 4670, теперь nvidia gtx 660, после замены видяхи я пробовал запустить минт и естественно только консоль а там я не очень (вот магея запустилась хоть и впечатление что черезстрочка, при перемещении окна нижняя часть как-бы запаздывает), переустанавливать систему жутко не хочу, там настроено уже все, реально куча прог уже, все работает..... какие варианты снести драйвера радика и поставить нвидию, подскажите что и как делать.
LinuxForum.Fans
с ATI на Nvidia, настройка драйвера
Автор: DWORKIN
28 сообщений
4883 просмотров
Сначала хотелось бы узнать, как был установлен драйвер на старую карту, и какой он - свободный radeon или проприетарный fglrx?
ну для начала удалить все драйвера атишные
потом просто перезагрузить систему
она запустится со свободным драйвером nouveau
если будет всё устраивать - больше ничего не трогать
Честно я даже и не смотрел какой драйвер встал на старую, но думаю что свободный, атишники перестали ведь поддерживать старые карты на новых ядрах, аж до 5ххх серии вроде, термо а как удалить все атишные драйвера из консоли? И да, nouveau при такой видеокарте это как-то...ну не очень, смысл если "родные" работают куда лучше.
Вот кстати посмотрел xorg.conf:
Section "Device"
Identifier "device1"
VendorName "Advanced Micro Devices [AMD] nee ATI"
BoardName "ATI Radeon HD 4870 and earlier"
Driver "ati"
Option "DPMS"
Option "GLX"
ха
если у тебя есть xorg.conf то всё обстоит совершенно иначе
я бы сделал так:
1. загрузился со старой картой
2. скачал драйвер nvidia с сайта
3. внес бы сразу nouveau в blacklist
4. удалил бы все ATI драйвера через synaptic
5. выключил компьютер
6. поменял бы видеокарту
7. включил компьютер
8. получил бы черный экран
9. вышел в консольный режим
10. запустил инсталлятор
sudo sh ./NVIDIA-блаблабла.run
11. отметил бы создание нового xorg.conf
12. загрузил иксы
лично для меня это гораздо проще
чем набивать команды в терминале
Да, попробую завтра после работы, надо ставить еще, если память не изменяет, кернел сорс и кернел девел...в общем завтра попробую - отпишусь.
Во-первых, переименуйте xorg.conf:
text
mv /etc/X11/xorg.conf /etc/X11/xorg.conf.atiПокажите
text
sudo dpkg -l xserver-xorg-video*Драйвер ati, если не ошибаюсь, это один из свободных xorg-server-xorg-video-{ati,r128}.
Затем, скачайте драйвер nvidia для вашей карты:
text
wget ftp://download.nvidia.com/XFree86/Linux-x86{,_64}/331.20/NVIDIA-Linux-x86{,_64}-331.20.runСсылку в команде при необходимости поправьте под свою архитектуру.
Затем, проверьте и при необходимости установите исходники и заголовочные файлы ядра, компилятор:
text
sudo apt-get install linux-sources-generic linux-headers-generic build-essentialЗатем, приступайте к установке драйвера:
text
sudo echo "blacklist nouveau >> /etc/modprobe.d/blacklist.conf"
sudo ./NVIDIA-*.run
sudo nvidia-xconfigЯ пользуюсь Slackware, поэтому инструкция может быть неполной и/или содержать ошибки. О проблемах рапортуйте.
yars вот вывод dpkg
text
un xserver-xorg-v <нет> (описание недосту
un xserver-xorg-v <нет> (описание недосту
un xserver-xorg-v <нет> (описание недосту
un xserver-xorg-v <нет> (описание недосту
un xserver-xorg-v <нет> (описание недосту
un xserver-xorg-v <нет> (описание недосту
un xserver-xorg-v <нет> (описание недосту
un xserver-xorg-v <нет> (описание недосту
ii xserver-xorg-v 1:7.7+1ubunt amd64 X.Org X server -- output driver m
ii xserver-xorg-v 1:7.1.0-0ubu amd64 X.Org X server -- AMD/ATI display
ii xserver-xorg-v 1:1.5.2-0ubu amd64 X.Org X server -- Cirrus display
un xserver-xorg-v <нет> (описание недосту
ii xserver-xorg-v 1:0.4.3-0ubu amd64 X.Org X server -- fbdev display d
un xserver-xorg-v <нет> (описание недосту
un xserver-xorg-v <нет> (описание недосту
ii xserver-xorg-v 2:2.21.6-0ub amd64 X.Org X server -- Intel i8xx, i9x
ii xserver-xorg-v 6.9.3-0ubunt amd64 X.Org X server -- ATI Mach64 disp
ii xserver-xorg-v 1:1.6.2-0ubu amd64 X.Org X server -- MGA display dri
ii xserver-xorg-v 0.7.0-0ubunt amd64 X.Org X server -- Generic modeset
ii xserver-xorg-v 1:1.2.7-0ubu amd64 X.Org X server -- Neomagic displa
ii xserver-xorg-v 1:1.0.7-0ubu amd64 X.Org X server -- Nouveau display
un xserver-xorg-v <нет> (описание недосту
ii xserver-xorg-v 1:0.3.1-0ubu amd64 X.Org X server -- VIA display dri
ii xserver-xorg-v 0.1.0-0ubunt amd64 X.Org X server -- QXL display dri
ii xserver-xorg-v 6.9.1-0ubunt amd64 X.Org X server -- ATI r128 displa
ii xserver-xorg-v 1:7.1.0-0ubu amd64 X.Org X server -- AMD/ATI Radeon
ii xserver-xorg-v 1:0.6.5-0ubu amd64 X.Org X server -- legacy S3 displ
ii xserver-xorg-v 1:2.3.6-0ubu amd64 X.Org X server -- Savage display
ii xserver-xorg-v 1:1.7.7-0ubu amd64 X.Org X server -- SiliconMotion d
ii xserver-xorg-v 1:0.10.7-0ub amd64 X.Org X server -- SiS display dri
ii xserver-xorg-v 1:0.9.6-0ubu amd64 X.Org X server -- SiS USB display
un xserver-xorg-v <нет> (описание недосту
ii xserver-xorg-v 1:1.4.5-0ubu amd64 X.Org X server -- tdfx display dr
ii xserver-xorg-v 1:1.3.6-0ubu amd64 X.Org X server -- Trident display
un xserver-xorg-v <нет> (описание недосту
ii xserver-xorg-v 1:2.3.2-0ubu amd64 X.Org X server -- VESA display dr
un xserver-xorg-v <нет> (описание недосту
ii xserver-xorg-v 1:12.0.2+git amd64 X.Org X server -- VMware displayпока еще ни чего почти не делал, времени не было, поставил назад старую видяху, добавил nouveau в черный список и установил nvidia-current
Да еще, в магее установил проприетарный, скачаный с сайта нвидии, отрисовка ужас - такое впечатление что на хр без драйвера видео, система тормозит, файловый менеджер открывается с минуту....фигня какая-то.
именно!фигня какая-то.
Вечер добрый, наконец добрался до компа, после добавления nouveau в черный список и установки nvidia-current (драйвера ати не удалял, переименовал xorg.conf) установил видяху новую, попытался загрузиться и увидел черный экран с мигающим курсором....и все, тишина. Поставил назад старую видяху, загрузился, но композит уже не работает, отвалились заголовки окон. Если нужно удалить драйвера ати, то скажите как это сделать из консоли.
Согласен, там у меня кде и гном, в кедах тормоза, в гноме вроде нормально....бред? Бред!именно!
Вечер добрый, сегодня, после нескольких неудачных попыток добраться до консоли на новой видяхе, поставил старую, зашел в систему, установил обновления, переименовал xorg.conf и перезагрузился...запустилось, но система явно притормаживает по видео, при просмотре видео идут горизонтальные полосы "черезстрочка", при перемещении окон тоже наблюдаются притормаживания, хотя компиз пашет но как-то.... как это победить? Драйвера ставил, как и говорил выше, системные из реп 304 версия, а не скачанные на nvidia, новый xorg.conf не создавал, он нужен или нет? Там же в репах есть еще драйвера 313 версия по моему, ставить их или лучше качнуть с сайта nvidia 331ю версию? Да, драйвера ati я не удалял, и nouveau тоже установлен но в черном списте, удалять обязательно? Да еще, шестеренки выдают при отключенном sync to vblank 10960 fps, при включенном ~ 60 fps, это номально?
Ну отрапортовал вроде :) .О проблемах рапортуйте.
это номально?
Да. Но если с таким FPS есть проблемы, то можно и отключить.
новый xorg.conf не создавал
Желательно, командой
text
# nvidia-xconfig -o /etc/X11/xorg.conf.d/10-nvidia.confв репах есть еще драйвера 313 версия по моему
Если есть желание.
качнуть с сайта nvidia 331ю версию
Если есть еще большее желание. Там, возможно, есть багфиксы.
хотя компиз пашет но как-то.... как это победить?
Покажите /var/log/Xorg.0.log.
Да, драйвера ati я не удалял, и nouveau тоже установлен но в черном списте, удалять обязательно?
Как вариант, тоже в черный список. Но можно/нужно удалить.
И напоследок:
после нескольких неудачных попыток добраться до консоли
Камень в огород systemd киньте.
А что дает опция -o и почему 10-nvidia а не просто nvidia, это принципиально? Раньше просто в мандриве и позже в магее просто запускал nvidia-xconfig и все.# nvidia-xconfig -o /etc/X11/xorg.conf.d/10-nvidia.conf
text
[ 28.201]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 28.201] X Protocol Version 11, Revision 0
[ 28.201] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 28.201] Current Operating System: Linux nam-Z77 3.8.0-25-generic #37-Ubuntu SMP Thu Jun 6 20:47:07 UTC 2013 x86_64
[ 28.201] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-25-generic root=UUID=a48b8d5a-b409-4d41-a38a-aa5a2d6982a3 ro quiet splash
[ 28.201] Build Date: 17 April 2013 10:43:13PM
[ 28.201] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[ 28.201] Current version of pixman: 0.28.2
[ 28.201] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.201] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.201] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 24 01:14:38 2013
[ 28.223] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28.223] (==) No Layout section. Using the first Screen section.
[ 28.223] (==) No screen section available. Using defaults.
[ 28.223] (**) |-->Screen "Default Screen Section" (0)
[ 28.223] (**) | |-->Monitor "<default monitor>"
[ 28.223] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 28.223] (==) Automatically adding devices
[ 28.223] (==) Automatically enabling devices
[ 28.223] (==) Automatically adding GPU devices
[ 28.223] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 28.223] Entry deleted from font path.
[ 28.223] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 28.223] Entry deleted from font path.
[ 28.223] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 28.223] Entry deleted from font path.
[ 28.223] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 28.223] Entry deleted from font path.
[ 28.223] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 28.223] Entry deleted from font path.
[ 28.223] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 28.223] Entry deleted from font path.
[ 28.223] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 28.223] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 28.223] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 28.223] (II) Loader magic: 0x7fbf3261ad20
[ 28.223] (II) Module ABI versions:
[ 28.223] X.Org ANSI C Emulation: 0.4
[ 28.223] X.Org Video Driver: 13.1
[ 28.223] X.Org XInput driver : 18.0
[ 28.223] X.Org Server Extension : 7.0
[ 28.223] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 28.224] (--) PCI: (0:0:2:0) 8086:0152:1462:2111 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 28.224] (--) PCI:*(0:1:0:0) 10de:11c0:1043:843b rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 28.224] (II) Open ACPI successful (/var/run/acpid.socket)
[ 28.224] Initializing built-in extension Generic Event Extension
[ 28.224] Initializing built-in extension SHAPE
[ 28.224] Initializing built-in extension MIT-SHM
[ 28.224] Initializing built-in extension XInputExtension
[ 28.224] Initializing built-in extension XTEST
[ 28.224] Initializing built-in extension BIG-REQUESTS
[ 28.224] Initializing built-in extension SYNC
[ 28.224] Initializing built-in extension XKEYBOARD
[ 28.224] Initializing built-in extension XC-MISC
[ 28.224] Initializing built-in extension SECURITY
[ 28.224] Initializing built-in extension XINERAMA
[ 28.224] Initializing built-in extension XFIXES
[ 28.224] Initializing built-in extension RENDER
[ 28.224] Initializing built-in extension RANDR
[ 28.224] Initializing built-in extension COMPOSITE
[ 28.224] Initializing built-in extension DAMAGE
[ 28.224] Initializing built-in extension MIT-SCREEN-SAVER
[ 28.224] Initializing built-in extension DOUBLE-BUFFER
[ 28.224] Initializing built-in extension RECORD
[ 28.224] Initializing built-in extension DPMS
[ 28.224] Initializing built-in extension X-Resource
[ 28.224] Initializing built-in extension XVideo
[ 28.224] Initializing built-in extension XVideo-MotionCompensation
[ 28.224] Initializing built-in extension SELinux
[ 28.224] Initializing built-in extension XFree86-VidModeExtension
[ 28.224] Initializing built-in extension XFree86-DGA
[ 28.224] Initializing built-in extension XFree86-DRI
[ 28.224] Initializing built-in extension DRI2
[ 28.224] (II) LoadModule: "glx"
[ 28.276] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 29.786] (II) Module glx: vendor="NVIDIA Corporation"
[ 29.786] compiled for 4.0.2, module version = 1.0.0
[ 29.786] Module class: X.Org Server Extension
[ 29.786] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:46:57 PDT 2013
[ 29.786] Loading extension GLX
[ 29.786] (==) Matched intel as autoconfigured driver 0
[ 29.786] (==) Matched nvidia as autoconfigured driver 1
[ 29.786] (==) Matched nouveau as autoconfigured driver 2
[ 29.786] (==) Matched vesa as autoconfigured driver 3
[ 29.786] (==) Matched modesetting as autoconfigured driver 4
[ 29.786] (==) Matched fbdev as autoconfigured driver 5
[ 29.786] (==) Assigned the driver to the xf86ConfigLayout
[ 29.786] (II) LoadModule: "intel"
[ 29.794] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.856] (II) Module intel: vendor="X.Org Foundation"
[ 29.856] compiled for 1.13.3, module version = 2.21.6
[ 29.856] Module class: X.Org Video Driver
[ 29.856] ABI class: X.Org Video Driver, version 13.1
[ 29.856] (II) LoadModule: "nvidia"
[ 29.856] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 30.006] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 30.006] compiled for 4.0.2, module version = 1.0.0
[ 30.006] Module class: X.Org Video Driver
[ 30.048] (II) LoadModule: "nouveau"
[ 30.048] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 30.068] (II) Module nouveau: vendor="X.Org Foundation"
[ 30.068] compiled for 1.13.3, module version = 1.0.7
[ 30.068] Module class: X.Org Video Driver
[ 30.068] ABI class: X.Org Video Driver, version 13.1
[ 30.068] (II) LoadModule: "vesa"
[ 30.069] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 30.079] (II) Module vesa: vendor="X.Org Foundation"
[ 30.079] compiled for 1.12.99.902, module version = 2.3.2
[ 30.079] Module class: X.Org Video Driver
[ 30.079] ABI class: X.Org Video Driver, version 13.0
[ 30.079] (II) LoadModule: "modesetting"
[ 30.079] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 30.086] (II) Module modesetting: vendor="X.Org Foundation"
[ 30.086] compiled for 1.13.3, module version = 0.7.0
[ 30.086] Module class: X.Org Video Driver
[ 30.086] ABI class: X.Org Video Driver, version 13.1
[ 30.086] (II) LoadModule: "fbdev"
[ 30.087] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 30.087] (II) Module fbdev: vendor="X.Org Foundation"
[ 30.087] compiled for 1.12.99.902, module version = 0.4.3
[ 30.087] Module class: X.Org Video Driver
[ 30.087] ABI class: X.Org Video Driver, version 13.0
[ 30.087] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 30.087] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:28:14 PDT 2013
[ 30.087] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 30.087] (II) NOUVEAU driver Date: Wed Mar 27 09:50:03 2013 +0100
[ 30.087] (II) NOUVEAU driver for NVIDIA chipset families :
[ 30.087] RIVA TNT (NV04)
[ 30.087] RIVA TNT2 (NV05)
[ 30.087] GeForce 256 (NV10)
[ 30.088] GeForce 2 (NV11, NV15)
[ 30.088] GeForce 4MX (NV17, NV18)
[ 30.088] GeForce 3 (NV20)
[ 30.088] GeForce 4Ti (NV25, NV28)
[ 30.088] GeForce FX (NV3x)
[ 30.088] GeForce 6 (NV4x)
[ 30.088] GeForce 7 (G7x)
[ 30.088] GeForce 8 (G8x)
[ 30.088] GeForce GTX 200 (NVA0)
[ 30.088] GeForce GTX 400 (NVC0)
[ 30.088] (II) VESA: driver for VESA chipsets: vesa
[ 30.088] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 30.088] (II) FBDEV: driver for framebuffer: fbdev
[ 30.088] (++) using VT number 8
[ 30.100] (II) intel(G0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>)
[ 30.104] (II) Loading sub module "fb"
[ 30.104] (II) LoadModule: "fb"
[ 30.104] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.104] (II) Module fb: vendor="X.Org Foundation"
[ 30.104] compiled for 1.13.3, module version = 1.0.0
[ 30.104] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.104] (II) Loading sub module "wfb"
[ 30.104] (II) LoadModule: "wfb"
[ 30.104] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 30.115] (II) Module wfb: vendor="X.Org Foundation"
[ 30.115] compiled for 1.13.3, module version = 1.0.0
[ 30.115] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.115] (II) Loading sub module "ramdac"
[ 30.115] (II) LoadModule: "ramdac"
[ 30.115] (II) Module "ramdac" already built-in
[ 30.133] (WW) Falling back to old probe method for vesa
[ 30.133] (WW) Falling back to old probe method for modesetting
[ 30.133] (WW) Falling back to old probe method for fbdev
[ 30.133] (II) Loading sub module "fbdevhw"
[ 30.133] (II) LoadModule: "fbdevhw"
[ 30.133] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 30.142] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 30.142] compiled for 1.13.3, module version = 0.0.2
[ 30.142] ABI class: X.Org Video Driver, version 13.1
[ 30.153] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.153] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 30.153] (==) NVIDIA(0): RGB weight 888
[ 30.153] (==) NVIDIA(0): Default visual is TrueColor
[ 30.153] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.153] (**) NVIDIA(0): Enabling 2D acceleration
[ 30.915] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-1)) does not support
[ 30.915] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 30.933] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[ 30.933] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 30.933] (--) NVIDIA(0): VideoBIOS: 80.06.58.00.09
[ 30.933] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.933] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.948] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[ 30.948] (--) NVIDIA(0): CRT-0
[ 30.948] (--) NVIDIA(0): DFP-0
[ 30.948] (--) NVIDIA(0): LG Electronics IPS236 (DFP-1) (connected)
[ 30.948] (--) NVIDIA(0): DFP-2
[ 30.948] (--) NVIDIA(0): DFP-3
[ 30.948] (--) NVIDIA(0): DFP-4
[ 30.948] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.948] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 30.948] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 30.948] (--) NVIDIA(0): LG Electronics IPS236 (DFP-1): 165.0 MHz maximum pixel clock
[ 30.948] (--) NVIDIA(0): LG Electronics IPS236 (DFP-1): Internal Single Link TMDS
[ 30.948] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 30.948] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 30.948] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[ 30.948] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS
[ 30.948] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[ 30.948] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 30.948] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.948] (**) NVIDIA(0): device LG Electronics IPS236 (DFP-1) (Using EDID
[ 30.948] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 30.949] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 30.949] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 30.949] (WW) NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
[ 30.949] (WW) NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
[ 30.949] (WW) NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
[ 30.949] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 30.949] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 30.949] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 30.949] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 30.949] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 30.949] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 30.949] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 30.949] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 30.949] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 30.949] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 30.949] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 30.949] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 30.949] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 30.949] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 30.949] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 30.949] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 30.949] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 30.949] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 30.949] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 30.949] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 30.949] (==) NVIDIA(0):
[ 30.949] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.949] (==) NVIDIA(0): will be used as the requested mode.
[ 30.949] (==) NVIDIA(0):
[ 30.949] (II) NVIDIA(0): Validated MetaModes:
[ 30.949] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 30.949] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 30.975] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 30.975] (--) NVIDIA(0): option
[ 30.975] (==) intel(G0): Depth 24, (--) framebuffer bpp 32
[ 30.975] (==) intel(G0): RGB weight 888
[ 30.975] (==) intel(G0): Default visual is TrueColor
[ 30.976] (--) intel(G0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1)
[ 30.976] (--) intel(G0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 30.976] (**) intel(G0): Framebuffer tiled
[ 30.976] (**) intel(G0): Pixmaps tiled
[ 30.976] (**) intel(G0): "Tear free" disabled
[ 30.976] (**) intel(G0): Forcing per-crtc-pixmaps? no
[ 30.992] (II) intel(G0): Output VGA1 has no monitor section
[ 31.008] (II) intel(G0): Output HDMI1 has no monitor section
[ 31.056] (II) intel(G0): Output DP1 has no monitor section
[ 31.072] (II) intel(G0): Output HDMI2 has no monitor section
[ 31.120] (II) intel(G0): Output DP2 has no monitor section
[ 31.136] (II) intel(G0): EDID for output VGA1
[ 31.152] (II) intel(G0): EDID for output HDMI1
[ 31.200] (II) intel(G0): EDID for output DP1
[ 31.216] (II) intel(G0): EDID for output HDMI2
[ 31.264] (II) intel(G0): EDID for output DP2
[ 31.264] (II) intel(G0): Output VGA1 disconnected
[ 31.264] (II) intel(G0): Output HDMI1 disconnected
[ 31.264] (II) intel(G0): Output DP1 disconnected
[ 31.264] (II) intel(G0): Output HDMI2 disconnected
[ 31.264] (II) intel(G0): Output DP2 disconnected
[ 31.264] (WW) intel(G0): No outputs definitely connected, trying again...
[ 31.264] (II) intel(G0): Output VGA1 disconnected
[ 31.264] (II) intel(G0): Output HDMI1 disconnected
[ 31.264] (II) intel(G0): Output DP1 disconnected
[ 31.264] (II) intel(G0): Output HDMI2 disconnected
[ 31.264] (II) intel(G0): Output DP2 disconnected
[ 31.264] (WW) intel(G0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 31.264] (II) intel(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 31.264] (==) intel(G0): DPI set to (96, 96)
[ 31.264] (II) Loading sub module "dri2"
[ 31.264] (II) LoadModule: "dri2"
[ 31.264] (II) Module "dri2" already built-in
[ 31.264] (II) UnloadModule: "nouveau"
[ 31.264] (II) Unloading nouveau
[ 31.264] (II) UnloadModule: "vesa"
[ 31.264] (II) Unloading vesa
[ 31.264] (II) UnloadModule: "modesetting"
[ 31.264] (II) Unloading modesetting
[ 31.264] (II) UnloadModule: "fbdev"
[ 31.264] (II) Unloading fbdev
[ 31.264] (II) UnloadSubModule: "fbdevhw"
[ 31.264] (II) Unloading fbdevhw
[ 31.264] (--) Depth 24 pixmap format is 32 bpp
[ 31.286] (II) intel(G0): SNA initialized with IvyBridge backend
[ 31.286] (==) intel(G0): Backing store disabled
[ 31.286] (==) intel(G0): Silken mouse enabled
[ 31.286] (II) intel(G0): HW Cursor enabled
[ 31.286] (II) intel(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 31.287] (==) intel(G0): DPMS enabled
[ 31.287] (II) intel(G0): [DRI2] Setup complete
[ 31.287] (II) intel(G0): [DRI2] DRI driver: i965
[ 31.287] (II) intel(G0): direct rendering: DRI2 Enabled
[ 31.287] (==) intel(G0): hotplug detection: "enabled"
[ 31.287] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 31.287] (II) NVIDIA: access.
[ 31.291] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 31.337] Loading extension NV-GLX
[ 31.353] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 31.353] (==) NVIDIA(0): Backing store disabled
[ 31.353] (==) NVIDIA(0): Silken mouse enabled
[ 31.354] (==) NVIDIA(0): DPMS enabled
[ 31.354] Loading extension NV-CONTROL
[ 31.354] Loading extension XINERAMA
[ 31.354] (II) Loading sub module "dri2"
[ 31.354] (II) LoadModule: "dri2"
[ 31.354] (II) Module "dri2" already built-in
[ 31.354] (II) NVIDIA(0): [DRI2] Setup complete
[ 31.354] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 31.354] (--) RandR disabled
[ 31.357] (II) SELinux: Disabled on system
[ 31.357] (II) Initializing extension GLX
[ 31.463] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 31.464] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 31.464] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.464] (II) LoadModule: "evdev"
[ 31.465] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 31.479] (II) Module evdev: vendor="X.Org Foundation"
[ 31.479] compiled for 1.13.3, module version = 2.7.3
[ 31.479] Module class: X.Org XInput Driver
[ 31.479] ABI class: X.Org XInput driver, version 18.0
[ 31.479] (II) Using input driver 'evdev' for 'Power Button'
[ 31.479] (**) Power Button: always reports core events
[ 31.479] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 31.479] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.479] (--) evdev: Power Button: Found keys
[ 31.479] (II) evdev: Power Button: Configuring as keyboard
[ 31.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 31.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.479] (**) Option "xkb_rules" "evdev"
[ 31.479] (**) Option "xkb_model" "pc105"
[ 31.479] (**) Option "xkb_layout" "us,ru"
[ 31.479] (**) Option "xkb_variant" ","
[ 31.479] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 31.481] (II) XKB: reuse xkmfile /var/lib/xkb/server-5BD46092C922CD443B4EABE4B26B5EFCDED629BD.xkm
[ 31.481] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 31.481] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 31.481] (II) Using input driver 'evdev' for 'Video Bus'
[ 31.481] (**) Video Bus: always reports core events
[ 31.481] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 31.481] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 31.481] (--) evdev: Video Bus: Found keys
[ 31.481] (II) evdev: Video Bus: Configuring as keyboard
[ 31.481] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 31.481] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 31.481] (**) Option "xkb_rules" "evdev"
[ 31.481] (**) Option "xkb_model" "pc105"
[ 31.481] (**) Option "xkb_layout" "us,ru"
[ 31.481] (**) Option "xkb_variant" ","
[ 31.481] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 31.482] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 31.482] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.482] (II) Using input driver 'evdev' for 'Power Button'
[ 31.482] (**) Power Button: always reports core events
[ 31.482] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 31.482] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.482] (--) evdev: Power Button: Found keys
[ 31.482] (II) evdev: Power Button: Configuring as keyboard
[ 31.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 31.482] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 31.482] (**) Option "xkb_rules" "evdev"
[ 31.482] (**) Option "xkb_model" "pc105"
[ 31.482] (**) Option "xkb_layout" "us,ru"
[ 31.482] (**) Option "xkb_variant" ","
[ 31.482] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 31.482] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 31.482] (II) No input driver specified, ignoring this device.
[ 31.482] (II) This device may have been added with another device file.
[ 31.482] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 31.482] (II) No input driver specified, ignoring this device.
[ 31.482] (II) This device may have been added with another device file.
[ 31.482] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 31.482] (II) No input driver specified, ignoring this device.
[ 31.482] (II) This device may have been added with another device file.
[ 31.482] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 31.482] (II) No input driver specified, ignoring this device.
[ 31.482] (II) This device may have been added with another device file.
[ 31.482] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 31.482] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 31.482] (II) config/udev: Adding input device USB Mouse (/dev/input/event4)
[ 31.482] (**) USB Mouse: Applying InputClass "evdev pointer catchall"
[ 31.482] (II) Using input driver 'evdev' for 'USB Mouse'
[ 31.482] (**) USB Mouse: always reports core events
[ 31.482] (**) evdev: USB Mouse: Device: "/dev/input/event4"
[ 31.483] (--) evdev: USB Mouse: Vendor 0x1ea7 Product 0x11
[ 31.483] (--) evdev: USB Mouse: Found 12 mouse buttons
[ 31.483] (--) evdev: USB Mouse: Found scroll wheel(s)
[ 31.483] (--) evdev: USB Mouse: Found relative axes
[ 31.483] (--) evdev: USB Mouse: Found x and y relative axes
[ 31.483] (II) evdev: USB Mouse: Configuring as mouse
[ 31.483] (II) evdev: USB Mouse: Adding scrollwheel support
[ 31.483] (**) evdev: USB Mouse: YAxisMapping: buttons 4 and 5
[ 31.483] (**) evdev: USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.483] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input4/event4"
[ 31.483] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE, id 9)
[ 31.483] (II) evdev: USB Mouse: initialized for relative axes.
[ 31.483] (**) USB Mouse: (accel) keeping acceleration scheme 1
[ 31.483] (**) USB Mouse: (accel) acceleration profile 0
[ 31.483] (**) USB Mouse: (accel) acceleration factor: 2.000
[ 31.483] (**) USB Mouse: (accel) acceleration threshold: 4
[ 31.483] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[ 31.483] (II) No input driver specified, ignoring this device.
[ 31.483] (II) This device may have been added with another device file.
[ 31.483] (II) config/udev: Adding input device USB Mouse (/dev/input/event5)
[ 31.483] (**) USB Mouse: Applying InputClass "evdev keyboard catchall"
[ 31.483] (II) Using input driver 'evdev' for 'USB Mouse'
[ 31.483] (**) USB Mouse: always reports core events
[ 31.483] (**) evdev: USB Mouse: Device: "/dev/input/event5"
[ 31.483] (--) evdev: USB Mouse: Vendor 0x1ea7 Product 0x11
[ 31.483] (--) evdev: USB Mouse: Found 1 mouse buttons
[ 31.483] (--) evdev: USB Mouse: Found scroll wheel(s)
[ 31.483] (--) evdev: USB Mouse: Found relative axes
[ 31.483] (II) evdev: USB Mouse: Forcing relative x/y axes to exist.
[ 31.483] (--) evdev: USB Mouse: Found absolute axes
[ 31.483] (II) evdev: USB Mouse: Forcing absolute x/y axes to exist.
[ 31.483] (--) evdev: USB Mouse: Found keys
[ 31.483] (II) evdev: USB Mouse: Configuring as mouse
[ 31.483] (II) evdev: USB Mouse: Configuring as keyboard
[ 31.483] (II) evdev: USB Mouse: Adding scrollwheel support
[ 31.483] (**) evdev: USB Mouse: YAxisMapping: buttons 4 and 5
[ 31.483] (**) evdev: USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.483] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input5/event5"
[ 31.483] (II) XINPUT: Adding extended input device "USB Mouse" (type: KEYBOARD, id 10)
[ 31.483] (**) Option "xkb_rules" "evdev"
[ 31.483] (**) Option "xkb_model" "pc105"
[ 31.483] (**) Option "xkb_layout" "us,ru"
[ 31.483] (**) Option "xkb_variant" ","
[ 31.483] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 31.483] (II) evdev: USB Mouse: initialized for relative axes.
[ 31.483] (WW) evdev: USB Mouse: ignoring absolute axes.
[ 31.483] (**) USB Mouse: (accel) keeping acceleration scheme 1
[ 31.483] (**) USB Mouse: (accel) acceleration profile 0
[ 31.483] (**) USB Mouse: (accel) acceleration factor: 2.000
[ 31.483] (**) USB Mouse: (accel) acceleration threshold: 4
[ 31.483] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 31.483] (II) No input driver specified, ignoring this device.
[ 31.483] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event11)
[ 31.484] (II) No input driver specified, ignoring this device.
[ 31.484] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event12)
[ 31.484] (II) No input driver specified, ignoring this device.
[ 31.484] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)
[ 31.484] (II) No input driver specified, ignoring this device.
[ 31.484] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event14)
[ 31.484] (II) No input driver specified, ignoring this device.
[ 31.484] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event6)
[ 31.484] (II) No input driver specified, ignoring this device.
[ 31.484] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[ 31.484] (II) No input driver specified, ignoring this device.
[ 31.484] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[ 31.484] (II) No input driver specified, ignoring this device.
[ 31.484] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 31.484] (II) No input driver specified, ignoring this device.
[ 31.484] (II) This device may have been added with another device file.
[ 31.484] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event19)
[ 31.484] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[ 31.484] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[ 31.484] (**) UVC Camera (046d:0825): always reports core events
[ 31.484] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event19"
[ 31.484] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[ 31.484] (--) evdev: UVC Camera (046d:0825): Found keys
[ 31.484] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[ 31.484] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input19/event19"
[ 31.484] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 11)
[ 31.484] (**) Option "xkb_rules" "evdev"
[ 31.484] (**) Option "xkb_model" "pc105"
[ 31.484] (**) Option "xkb_layout" "us,ru"
[ 31.484] (**) Option "xkb_variant" ","
[ 31.484] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 31.485] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 31.485] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 31.485] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 31.485] (**) AT Translated Set 2 keyboard: always reports core events
[ 31.485] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 31.485] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 31.485] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 31.485] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 31.485] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 31.485] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 31.485] (**) Option "xkb_rules" "evdev"
[ 31.485] (**) Option "xkb_model" "pc105"
[ 31.485] (**) Option "xkb_layout" "us,ru"
[ 31.485] (**) Option "xkb_variant" ","
[ 31.485] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 44.366] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-1)) does not support
[ 44.366] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 44.366] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 44.366] (**) NVIDIA(0): device LG Electronics IPS236 (DFP-1) (Using EDID
[ 44.366] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 44.366] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 44.367] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 44.367] (WW) NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
[ 44.367] (WW) NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
[ 44.367] (WW) NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
[ 44.367] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 44.367] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 44.367] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 44.367] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 44.367] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 44.367] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 44.367] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 44.367] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 44.367] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 44.367] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 44.367] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 44.367] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 44.367] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 44.367] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 44.367] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 44.367] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 44.367] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 44.367] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 44.367] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 44.367] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 47.457] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-1)) does not support
[ 47.457] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 47.457] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 47.457] (**) NVIDIA(0): device LG Electronics IPS236 (DFP-1) (Using EDID
[ 47.457] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 47.458] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 47.458] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 47.458] (WW) NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
[ 47.458] (WW) NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
[ 47.458] (WW) NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
[ 47.458] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 47.458] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 47.458] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 47.458] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 47.458] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 47.458] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 47.458] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 47.458] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 47.458] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 47.458] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 47.459] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 47.459] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 47.459] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 47.459] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 47.459] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 47.459] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 47.459] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 47.459] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 47.459] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 47.459] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 48.832] (II) XKB: reuse xkmfile /var/lib/xkb/server-5DEC09C9657466419FA830EDFA98C3D3ACF32C94.xkm
[ 49.185] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-1)) does not support
[ 49.185] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 49.185] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 49.185] (**) NVIDIA(0): device LG Electronics IPS236 (DFP-1) (Using EDID
[ 49.185] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 49.186] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.186] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 49.186] (WW) NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
[ 49.186] (WW) NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
[ 49.186] (WW) NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
[ 49.186] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.186] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 49.186] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 49.186] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 49.186] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 49.186] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.186] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 49.186] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 49.186] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 49.186] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 49.186] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.186] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 49.186] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 49.186] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 49.186] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 49.186] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.186] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 49.186] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 49.186] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 49.186] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 49.199] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-1)) does not support
[ 49.199] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 49.199] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 49.199] (**) NVIDIA(0): device LG Electronics IPS236 (DFP-1) (Using EDID
[ 49.199] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 49.199] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.199] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 49.199] (WW) NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
[ 49.199] (WW) NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
[ 49.199] (WW) NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
[ 49.199] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.199] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 49.199] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 49.199] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 49.199] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 49.200] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.200] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 49.200] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 49.200] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 49.200] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 49.200] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.200] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 49.200] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 49.200] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 49.200] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 49.200] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 49.200] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 49.200] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 49.200] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 49.200] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 50.540] (II) NVIDIA(GPU-0): Display (LG Electronics IPS236 (DFP-1)) does not support
[ 50.540] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 50.540] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 50.540] (**) NVIDIA(0): device LG Electronics IPS236 (DFP-1) (Using EDID
[ 50.540] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 50.541] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 50.541] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 50.541] (WW) NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
[ 50.541] (WW) NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
[ 50.541] (WW) NVIDIA(GPU-0): HorizSync check for mode "1920x1080".
[ 50.541] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 50.541] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 50.541] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 50.541] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 50.541] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 50.541] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 50.541] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 50.541] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 50.541] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 50.541] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 50.541] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 50.541] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 50.541] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 50.541] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 50.541] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 50.541] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 50.541] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 50.541] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-61.000 Hz) would
[ 50.541] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 50.541] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
завтра буду копать дальше, и на последок
где живет этот systemd и где его огород, я ему не камень я ему валун кину :)Камень в огород systemd киньте.
А что дает опция -o и почему 10-nvidia а не просто nvidia, это принципиально?
Ну, вообще-то, нет, не принципиально. Но сейчас цельный xorg.conf решили разделить на отдельные файлы, которые лежат в /etc/X11/xorg.conf.d. Цельный xorg.conf и сейчас еще работает, но... Прогресс не стоит на месте. Опция -o указывает выходной файл, если она не задана явно, выходным файлом будет старый добрый /etc/X11/xorg.conf (почти (q) man nvidia-xconfig). Каждый новый файл в xorg.conf.d соответствует секциям монолитного xorg.conf, у меня:
text
ls -l /etc/X11/xorg.conf{,.d/*.conf}
/bin/ls: невозможно получить доступ к /etc/X11/xorg.conf: Нет такого файла или каталога
-rw-r--r-- 1 root root 799 мар 4 2013 /etc/X11/xorg.conf.d/10-nvidia.conf
-rw-r--r-- 1 root root 293 фев 21 2013 /etc/X11/xorg.conf.d/90-keyboard-layout.conf
Первый из них такой:
text
cat /etc/X11/xorg.conf.d/10-nvidia.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu May 31 12:36:44 PDT 2012
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
Option "DynamicTwinView" "False"
Option "OnDemandVBlankInterrupts" "True"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Второй - такой:
text
cat /etc/X11/xorg.conf.d/90-keyboard-layout.conf
Section "InputClass"
Identifier "keyboard-all"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "us,ru"
#Option "XkbVariant" ",winkeys"
Option "XkbOptions" "terminate:ctrl_alt_bksp,grp:ctrl_shift_toggle,grp_led:scroll,compose:rwin"
EndSection
Вам нужно привести 10-nvidia.conf к примерно такому же виду, как у меня, второй вам не нужен.
И сейчас можете так сделать. Но из файла, вероятно, потребуется убрать строки, описывающие настройки клавиатуры (у меня они, как видите, в 90-keyboard-layout.conf лежат).Раньше просто в мандриве и позже в магее просто запускал nvidia-xconfig и все.
где живет этот systemd и где его огород, я ему не камень я ему валун кину
Впрочем, пока Ubuntu держится за upstart, можете и не кидать, хотя отдельные компоненты системного менеджера systemd, готорый был призван заменить собой init и все прочие системы инициализации. У вас в меню grub должен быть пункт что-то вроде "safe mode".
Дело в том что меню отсутствует напрочь, после прохождения POST черный экран аж до приветствия где нужно вводить логин и пароль. По драйверу нвидии, хотел поставить драйвера поновее из синаптика, но как то стремновато стало, сообщило что кроме драйвера 304 будет удален nvidia-current, вот я и побоялся, ставить скачанные драйвера не могу, поскольку не могу зайти в консоль, при загрузке не получается, при telinit3 пытается но комп уходит в дежурный режим, при Ctrl-Alt-F1 тоже в дежурный, в общем до консоли добраться не могу, если удалить nvidia-current это не критично? Почему при telinit3 и Ctrl-Alt-F1 кидает в дежурный режим?У вас в меню grub должен быть пункт что-то вроде "safe mode"
ну вообщето в х11 у меня нет xorg.conf.d..../etc/X11/xorg.conf.d
после пост зажмите левый шифт...
К сожалению результат нулевой, мать MSI Z77A-G43 клик биос может по этому, к выбору варианта загрузки минт добраться можно по F8 (обнаружил методом "тыка"), но даже если выбираю safe mode все равно в конце вываливается в графику, при ЛЮБОЙ попытке войти в консоль комп уходит в дежурный, при "завершить сеанс" тоже в дежурный и после примерно полминуты идет короткий системный "пик" и экран входа в систему. Стоит загрузчик граб2, это не его случайно "фокусы"? Синаптиком обновил драйвер nvidia до 313.30 - лучше не стало.после пост зажмите левый шифт...
У вас там что-то с чем-то конфликтует:
text
[ 44.366] (WW) NVIDIA(GPU-0): The EDID for LG Electronics IPS236 (DFP-1) contradicts itself:
[ 44.367] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 44.367] (WW) NVIDIA(GPU-0): EDID's valid HorizSync range (30.000-83.000 kHz) would
[ 44.367] (WW) NVIDIA(GPU-0): exclude this mode's HorizSync (28.1 kHz); ignoring
надо xorg.conf создавать и править.
Дело в том что меню отсутствует напрочь, после прохождения POST черный экран аж до приветствия где нужно вводить логин и пароль.
файл /etc/default/grub
text
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=false
GRUB_TIMEOUT="90"далее update-grub и reboot
xorg.conf создал nvidia-xconfig, у меня сохранился атишный конфиг, попробую вставить из него частоты, тут у васнадо xorg.conf создавать и править
это на сколько я понял работа на два монитора и вертикальная синхронизация по требованию? В данный момент у меня в конфигеOption "DynamicTwinView" "False" Option "OnDemandVBlankInterrupts" "True"
text
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Option "GLX"а в старом
text
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "IPS236"
HorizSync 30-83
VertRefresh 56-61разница налицо...попробую-отпишусь
вот такой вид после правки имеет мойфайл /etc/default/grub
text
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=false
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""если где что не так подскажите где и что.
Войдите или зарегистрируйтесь, чтобы ответить.
