LinuxForum.Fans
Тема

Разрешение экрана на lubuntu i386

Автор: tomchita 20 сообщений 2457 просмотров
#352027

На работе стоит старый моноблок 17" 4х3 установил на него Lubuntu i386 13.10 видео intel 915
Задача поставить на него разрешение 1280х1024. Оно вроде как не подходит для него но работает отлично что в винде что в linux.

text
$xrandr

Screen 0: minimum 320 x 200, current 1024 x 768, maximum 32767 x 32767 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9

text
$xrandr --addmode VGA1 1280x1024_60.00
text
$xrandr --newmode "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync

добавляет но после перегрузки встает 1024х768
как сделать что-бы оно по умолчанию грузилось с 1280х1024?

#352055
"tomchita" написал:
добавляет но после перегрузки встает 1024х768
как сделать что-бы оно по умолчанию грузилось с 1280х1024?

Самый простой вариант - сделать скрипт из вышеуказанных комманд и добавить его в автозагрузку.

#352056

Сконфигурировать нормальный /etc/X11/xorg.conf и там всё прописать.

#352070
text
Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultDepth    24
        SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes     "1280x1024_60.00"
    EndSubSection
EndSection
#352071

Termo, Малацца, драйвер забыл...

#352076

драйвер же в девайсах
(вроде бы)

#352101

в /etc/X11/xorg.conf добавил не помогло

попробовал в /usr/share/X11/xorg.conf.d/10-monitor.conf

Section "Monitor"
Identifier "Monitor0"
EndSection

Section "Device"
Identifier "Device0"
Driver "VGA1" #Choose the driver used for this monitor
EndSection

Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24 #Choose the depth (16||24)
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" #Choose the resolution
EndSubSection
EndSection

аффекта тоже нет

sandaksatru написал:
[quote="tomchita"]добавляет но после перегрузки встает 1024х768
как сделать что-бы оно по умолчанию грузилось с 1280х1024?

Самый простой вариант - сделать скрипт из вышеуказанных комманд и добавить его в автозагрузку.[/quote]

как написать скрипт?

#352102

tomchita, ну

HorizSync
VertRefresh

же ж!!!

Если мануал к монитору утерян - на сайт производителя.

#352106

нет мануала, моноблок китайский, купленный примерно в 2002-2005 году и нет вообще не какого описания в инете.

#352108

tomchita, моноблок - круто... Ну гадайте. Могу предположить, что примерно 30-82 и 50-85 на глаз...

#352164

моноблок китайский
Вывод
text

# uname -a
# lspci -knn
# cat /proc/{cpu,mem}info

расскажет если не все, то многое. По теме интересует

text
# lspci -k | grep -i -A2 "vga\|video"

и

text
$ cat /var/log/Xorg.*.log
#352165
Показать
# uname -a
Linux tom-pc 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 i686 i686 GNU/Linux

# lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 0e)
Subsystem: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 0e)
Subsystem: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582]
Kernel driver in use: i915
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04)
Subsystem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04)
Subsystem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04)
Subsystem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04)
Subsystem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04)
Subsystem: Intel Corporation Dimension 3100 [8086:265c]
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d4)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 04)
Kernel driver in use: snd_intel8x0
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 04)
Subsystem: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640]
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 04)
Subsystem: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a]
01:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Kernel driver in use: 8139too

# cat /proc/{cpu,mem}info
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Celeron(R) CPU 2.93GHz
stepping : 1
microcode : 0x9
cpu MHz : 2926.128
cache size : 256 KB
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts pni dtes64 monitor ds_cpl tm2 cid cx16 xtpr
bogomips : 5852.25
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:

MemTotal: 1537296 kB
MemFree: 599784 kB
Buffers: 11656 kB
Cached: 744040 kB
SwapCached: 4488 kB
Active: 387916 kB
Inactive: 467280 kB
Active(anon): 75016 kB
Inactive(anon): 74180 kB
Active(file): 312900 kB
Inactive(file): 393100 kB
Unevictable: 0 kB
Mlocked: 0 kB
HighTotal: 651208 kB
HighFree: 291468 kB
LowTotal: 886088 kB
LowFree: 308316 kB
SwapTotal: 2330240 kB
SwapFree: 2256792 kB
Dirty: 36 kB
Writeback: 0 kB
AnonPages: 95536 kB
Mapped: 78844 kB
Shmem: 49680 kB
Slab: 30976 kB
SReclaimable: 19292 kB
SUnreclaim: 11684 kB
KernelStack: 2744 kB
PageTables: 6260 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 3098888 kB
Committed_AS: 1658700 kB
VmallocTotal: 122880 kB
VmallocUsed: 10400 kB
VmallocChunk: 110496 kB
HardwareCorrupted: 0 kB
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 22520 kB
DirectMap2M: 890880 kB

# lspci -k | grep -i -A2 "vga\|video"
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 0e)
Subsystem: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller
Kernel driver in use: i915

$ cat /var/log/Xorg.*.log
[ 27.179]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 27.179] X Protocol Version 11, Revision 0
[ 27.179] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu
[ 27.179] Current Operating System: Linux tom-pc 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686
[ 27.179] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=f2b2737c-f4a1-4f79-9b61-d89a287cddce ro quiet splash vt.handoff=7
[ 27.179] Build Date: 15 October 2013 09:23:29AM
[ 27.179] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 27.179] Current version of pixman: 0.30.2
[ 27.179] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.179] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.179] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 30 16:52:45 2013
[ 27.180] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.180] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.181] (==) ServerLayout "X.org Configured"
[ 27.181] (**) |-->Screen "Screen0" (0)
[ 27.181] (**) | |-->Monitor "Monitor0"
[ 27.181] (**) | |-->Device "Device0"
[ 27.181] (**) |-->Screen "Screen1" (1)
[ 27.181] (**) | |-->Monitor "Monitor1"
[ 27.182] (**) | |-->Device "Card1"
[ 27.182] (**) |-->Screen "Screen2" (2)
[ 27.182] (**) | |-->Monitor "Monitor2"
[ 27.182] (**) | |-->Device "Card2"
[ 27.182] (**) |-->Screen "Screen3" (3)
[ 27.182] (**) | |-->Monitor "Monitor3"
[ 27.182] (**) | |-->Device "Card3"
[ 27.182] (**) |-->Input Device "Mouse0"
[ 27.182] (**) |-->Input Device "Keyboard0"
[ 27.182] (==) Automatically adding devices
[ 27.182] (==) Automatically enabling devices
[ 27.182] (==) Automatically adding GPU devices
[ 27.183] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 27.183] Entry deleted from font path.
[ 27.183] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 27.183] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 27.183] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 27.183] (WW) Disabling Mouse0
[ 27.183] (WW) Disabling Keyboard0
[ 27.183] (II) Loader magic: 0xb774f6a0
[ 27.183] (II) Module ABI versions:
[ 27.183] X.Org ANSI C Emulation: 0.4
[ 27.183] X.Org Video Driver: 14.1
[ 27.183] X.Org XInput driver : 19.1
[ 27.183] X.Org Server Extension : 7.0
[ 27.184] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27.186] (--) PCI:*(0:0:2:0) 8086:2582:8086:2582 rev 14, Mem @ 0xfbe80000/524288, 0xd0000000/268435456, 0xfbe40000/262144, I/O @ 0x0000dc00/8
[ 27.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 27.186] Initializing built-in extension Generic Event Extension
[ 27.186] Initializing built-in extension SHAPE
[ 27.186] Initializing built-in extension MIT-SHM
[ 27.186] Initializing built-in extension XInputExtension
[ 27.186] Initializing built-in extension XTEST
[ 27.186] Initializing built-in extension BIG-REQUESTS
[ 27.186] Initializing built-in extension SYNC
[ 27.186] Initializing built-in extension XKEYBOARD
[ 27.186] Initializing built-in extension XC-MISC
[ 27.186] Initializing built-in extension SECURITY
[ 27.186] Initializing built-in extension XINERAMA
[ 27.186] Initializing built-in extension XFIXES
[ 27.186] Initializing built-in extension RENDER
[ 27.186] Initializing built-in extension RANDR
[ 27.186] Initializing built-in extension COMPOSITE
[ 27.186] Initializing built-in extension DAMAGE
[ 27.186] Initializing built-in extension MIT-SCREEN-SAVER
[ 27.186] Initializing built-in extension DOUBLE-BUFFER
[ 27.186] Initializing built-in extension RECORD
[ 27.186] Initializing built-in extension DPMS
[ 27.187] Initializing built-in extension X-Resource
[ 27.187] Initializing built-in extension XVideo
[ 27.187] Initializing built-in extension XVideo-MotionCompensation
[ 27.187] Initializing built-in extension SELinux
[ 27.187] Initializing built-in extension XFree86-VidModeExtension
[ 27.187] Initializing built-in extension XFree86-DGA
[ 27.187] Initializing built-in extension XFree86-DRI
[ 27.187] Initializing built-in extension DRI2
[ 27.187] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 27.187] (WW) "xmir" is not to be loaded by default. Skipping.
[ 27.187] (II) LoadModule: "glx"
[ 27.188] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.210] (II) Module glx: vendor="X.Org Foundation"
[ 27.210] compiled for 1.14.3, module version = 1.0.0
[ 27.210] ABI class: X.Org Server Extension, version 7.0
[ 27.210] (==) AIGLX enabled
[ 27.210] Loading extension GLX
[ 27.210] (II) LoadModule: "vga1"
[ 27.220] (WW) Warning, couldn't open module vga1
[ 27.220] (II) UnloadModule: "vga1"
[ 27.220] (II) Unloading vga1
[ 27.220] (EE) Failed to load module "vga1" (module does not exist, 0)
[ 27.220] (II) LoadModule: "intel"
[ 27.220] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 27.237] (II) Module intel: vendor="X.Org Foundation"
[ 27.237] compiled for 1.14.3, module version = 2.99.904
[ 27.238] Module class: X.Org Video Driver
[ 27.238] ABI class: X.Org Video Driver, version 14.1
[ 27.238] (II) LoadModule: "vesa"
[ 27.238] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 27.238] (II) Module vesa: vendor="X.Org Foundation"
[ 27.238] compiled for 1.14.1, module version = 2.3.2
[ 27.238] Module class: X.Org Video Driver
[ 27.238] ABI class: X.Org Video Driver, version 14.1
[ 27.238] (II) LoadModule: "fbdev"
[ 27.238] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 27.240] (II) Module fbdev: vendor="X.Org Foundation"
[ 27.240] compiled for 1.14.1, module version = 0.4.3
[ 27.240] Module class: X.Org Video Driver
[ 27.240] ABI class: X.Org Video Driver, version 14.1
[ 27.240] (==) Matched intel as autoconfigured driver 0
[ 27.240] (==) Matched intel as autoconfigured driver 1
[ 27.240] (==) Matched vesa as autoconfigured driver 2
[ 27.240] (==) Matched modesetting as autoconfigured driver 3
[ 27.240] (==) Matched fbdev as autoconfigured driver 4
[ 27.240] (==) Assigned the driver to the xf86ConfigLayout
[ 27.240] (II) LoadModule: "intel"
[ 27.240] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 27.240] (II) Module intel: vendor="X.Org Foundation"
[ 27.240] compiled for 1.14.3, module version = 2.99.904
[ 27.240] Module class: X.Org Video Driver
[ 27.240] ABI class: X.Org Video Driver, version 14.1
[ 27.240] (II) UnloadModule: "intel"
[ 27.240] (II) Unloading intel
[ 27.240] (II) Failed to load module "intel" (already loaded, -1217390202)
[ 27.241] (II) LoadModule: "vesa"
[ 27.241] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 27.241] (II) Module vesa: vendor="X.Org Foundation"
[ 27.241] compiled for 1.14.1, module version = 2.3.2
[ 27.241] Module class: X.Org Video Driver
[ 27.241] ABI class: X.Org Video Driver, version 14.1
[ 27.241] (II) UnloadModule: "vesa"
[ 27.241] (II) Unloading vesa
[ 27.241] (II) Failed to load module "vesa" (already loaded, -1217390202)
[ 27.241] (II) LoadModule: "modesetting"
[ 27.241] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 27.241] (II) Module modesetting: vendor="X.Org Foundation"
[ 27.241] compiled for 1.14.1, module version = 0.8.0
[ 27.241] Module class: X.Org Video Driver
[ 27.241] ABI class: X.Org Video Driver, version 14.1
[ 27.242] (II) LoadModule: "fbdev"
[ 27.242] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 27.242] (II) Module fbdev: vendor="X.Org Foundation"
[ 27.242] compiled for 1.14.1, module version = 0.4.3
[ 27.242] Module class: X.Org Video Driver
[ 27.242] ABI class: X.Org Video Driver, version 14.1
[ 27.242] (II) UnloadModule: "fbdev"
[ 27.242] (II) Unloading fbdev
[ 27.242] (II) Failed to load module "fbdev" (already loaded, -1217390202)
[ 27.242] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 27.243] (II) VESA: driver for VESA chipsets: vesa
[ 27.243] (II) FBDEV: driver for framebuffer: fbdev
[ 27.243] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 27.243] (++) using VT number 7

[ 27.244] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.904-0ubuntu2 (Timo Aaltonen <tjaalton@ubuntu.com>)
[ 27.244] (WW) Falling back to old probe method for vesa
[ 27.244] (WW) Falling back to old probe method for fbdev
[ 27.244] (II) Loading sub module "fbdevhw"
[ 27.244] (II) LoadModule: "fbdevhw"
[ 27.244] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 27.244] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 27.244] compiled for 1.14.3, module version = 0.0.2
[ 27.244] ABI class: X.Org Video Driver, version 14.1
[ 27.245] (WW) Falling back to old probe method for modesetting
[ 27.246] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 27.246] (==) intel(0): RGB weight 888
[ 27.246] (==) intel(0): Default visual is TrueColor
[ 27.246] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915G
[ 27.246] (--) intel(0): CPU: x86, sse2, sse3
[ 27.247] (**) intel(0): Framebuffer tiled
[ 27.247] (**) intel(0): Pixmaps tiled
[ 27.247] (**) intel(0): "Tear free" disabled
[ 27.247] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 27.247] (II) intel(0): Output VGA1 using monitor section Monitor0
[ 27.247] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 28.486] (II) intel(0): EDID for output VGA1
[ 28.486] (II) intel(0): Printing probed modes for output VGA1
[ 28.486] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 28.486] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 28.486] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 28.486] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 28.486] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 28.486] (II) intel(0): EDID for output VIRTUAL1
[ 28.486] (II) intel(0): Output VGA1 connected
[ 28.486] (II) intel(0): Output VIRTUAL1 disconnected
[ 28.486] (II) intel(0): Using exact sizes for initial modes
[ 28.486] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 28.486] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 28.486] (==) intel(0): DPI set to (96, 96)
[ 28.486] (II) Loading sub module "dri2"
[ 28.486] (II) LoadModule: "dri2"
[ 28.487] (II) Module "dri2" already built-in
[ 28.487] (II) UnloadModule: "vesa"
[ 28.487] (II) Unloading vesa
[ 28.487] (II) UnloadModule: "fbdev"
[ 28.487] (II) Unloading fbdev
[ 28.487] (II) UnloadSubModule: "fbdevhw"
[ 28.487] (II) Unloading fbdevhw
[ 28.487] (II) UnloadModule: "modesetting"
[ 28.487] (II) Unloading modesetting
[ 28.487] (==) Depth 24 pixmap format is 32 bpp
[ 28.487] (II) intel(0): SNA initialized with Alviso (gen3) backend
[ 28.487] (==) intel(0): Backing store disabled
[ 28.487] (==) intel(0): Silken mouse enabled
[ 28.487] (II) intel(0): HW Cursor enabled
[ 28.487] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 28.488] (==) intel(0): DPMS enabled
[ 28.488] (II) intel(0): [DRI2] Setup complete
[ 28.488] (II) intel(0): [DRI2] DRI driver: i915
[ 28.488] (II) intel(0): direct rendering: DRI2 Enabled
[ 28.488] (==) intel(0): hotplug detection: "enabled"
[ 28.488] (--) RandR disabled
[ 28.501] (II) SELinux: Disabled on system
[ 28.576] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.577] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.577] (II) AIGLX: enabled GLX_ARB_create_context
[ 28.577] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 28.577] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 28.577] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 28.577] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.577] (II) AIGLX: Loaded and initialized i915
[ 28.577] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.584] (II) intel(0): switch to mode 1024x768@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal
[ 28.592] (II) intel(0): Setting screen physical size to 270 x 203
[ 28.615] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 28.620] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 28.620] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.620] (II) LoadModule: "evdev"
[ 28.620] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 28.642] (II) Module evdev: vendor="X.Org Foundation"
[ 28.642] compiled for 1.14.1, module version = 2.7.3
[ 28.642] Module class: X.Org XInput Driver
[ 28.642] ABI class: X.Org XInput driver, version 19.1
[ 28.642] (II) Using input driver 'evdev' for 'Power Button'
[ 28.642] (**) Power Button: always reports core events
[ 28.642] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 28.642] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.642] (--) evdev: Power Button: Found keys
[ 28.643] (II) evdev: Power Button: Configuring as keyboard
[ 28.643] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 28.643] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 28.643] (**) Option "xkb_rules" "evdev"
[ 28.643] (**) Option "xkb_model" "pc105"
[ 28.643] (**) Option "xkb_layout" "us,ru"
[ 28.643] (**) Option "xkb_variant" ","
[ 28.643] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 28.647] (II) XKB: reuse xkmfile /var/lib/xkb/server-5BD46092C922CD443B4EABE4B26B5EFCDED629BD.xkm
[ 28.648] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 28.649] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 28.649] (II) Using input driver 'evdev' for 'Power Button'
[ 28.649] (**) Power Button: always reports core events
[ 28.649] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 28.649] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28.649] (--) evdev: Power Button: Found keys
[ 28.649] (II) evdev: Power Button: Configuring as keyboard
[ 28.649] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 28.649] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 28.649] (**) Option "xkb_rules" "evdev"
[ 28.649] (**) Option "xkb_model" "pc105"
[ 28.649] (**) Option "xkb_layout" "us,ru"
[ 28.649] (**) Option "xkb_variant" ","
[ 28.649] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 28.650] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 28.650] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[ 28.651] (II) config/udev: Adding input device JME Co., Ltd. Key Pad & Remoter Controller (/dev/input/event2)
[ 28.651] (**) JME Co., Ltd. Key Pad & Remoter Controller: Applying InputClass "evdev keyboard catchall"
[ 28.651] (II) Using input driver 'evdev' for 'JME Co., Ltd. Key Pad & Remoter Controller'
[ 28.651] (**) JME Co., Ltd. Key Pad & Remoter Controller: always reports core events
[ 28.651] (**) evdev: JME Co., Ltd. Key Pad & Remoter Controller: Device: "/dev/input/event2"
[ 28.651] (--) evdev: JME Co., Ltd. Key Pad & Remoter Controller: Vendor 0x5af Product 0x8001
[ 28.651] (--) evdev: JME Co., Ltd. Key Pad & Remoter Controller: Found relative axes
[ 28.651] (--) evdev: JME Co., Ltd. Key Pad & Remoter Controller: Found x and y relative axes
[ 28.651] (--) evdev: JME Co., Ltd. Key Pad & Remoter Controller: Found keys
[ 28.651] (II) evdev: JME Co., Ltd. Key Pad & Remoter Controller: Configuring as mouse
[ 28.651] (II) evdev: JME Co., Ltd. Key Pad & Remoter Controller: Configuring as keyboard
[ 28.651] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 28.651] (II) XINPUT: Adding extended input device "JME Co., Ltd. Key Pad & Remoter Controller" (type: KEYBOARD, id 8)
[ 28.651] (**) Option "xkb_rules" "evdev"
[ 28.651] (**) Option "xkb_model" "pc105"
[ 28.651] (**) Option "xkb_layout" "us,ru"
[ 28.651] (**) Option "xkb_variant" ","
[ 28.651] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 28.652] (II) evdev: JME Co., Ltd. Key Pad & Remoter Controller: initialized for relative axes.
[ 28.652] (**) JME Co., Ltd. Key Pad & Remoter Controller: (accel) keeping acceleration scheme 1
[ 28.652] (**) JME Co., Ltd. Key Pad & Remoter Controller: (accel) acceleration profile 0
[ 28.653] (**) JME Co., Ltd. Key Pad & Remoter Controller: (accel) acceleration factor: 2.000
[ 28.653] (**) JME Co., Ltd. Key Pad & Remoter Controller: (accel) acceleration threshold: 4
[ 28.653] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 28.653] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 28.653] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 28.653] (**) Logitech USB Receiver: always reports core events
[ 28.654] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 28.654] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 28.654] (--) evdev: Logitech USB Receiver: Found keys
[ 28.654] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 28.654] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3/event3"
[ 28.654] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 28.654] (**) Option "xkb_rules" "evdev"
[ 28.654] (**) Option "xkb_model" "pc105"
[ 28.654] (**) Option "xkb_layout" "us,ru"
[ 28.654] (**) Option "xkb_variant" ","
[ 28.654] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 28.655] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 28.655] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 28.655] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 28.655] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 28.655] (**) Logitech USB Receiver: always reports core events
[ 28.655] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 28.656] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 28.656] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 28.656] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 28.656] (--) evdev: Logitech USB Receiver: Found relative axes
[ 28.656] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 28.656] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 28.656] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 28.656] (--) evdev: Logitech USB Receiver: Found keys
[ 28.656] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 28.656] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 28.656] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 28.656] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 28.656] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input4/event4"
[ 28.656] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 28.656] (**) Option "xkb_rules" "evdev"
[ 28.656] (**) Option "xkb_model" "pc105"
[ 28.656] (**) Option "xkb_layout" "us,ru"
[ 28.656] (**) Option "xkb_variant" ","
[ 28.656] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 28.657] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 28.657] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 28.657] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 28.657] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 28.657] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 28.657] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 28.658] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 28.658] (II) No input driver specified, ignoring this device.
[ 28.658] (II) This device may have been added with another device file.
[ 38.722] (II) XKB: reuse xkmfile /var/lib/xkb/server-7322F64E96E11C1E4CA97145438BDBC2D43A31B0.xkm
[ 38.959] (II) XKB: reuse xkmfile /var/lib/xkb/server-719093A33B468275582F0A78CA52014F76EC337E.xkm
[ 39.874] (II) XKB: reuse xkmfile /var/lib/xkb/server-7322F64E96E11C1E4CA97145438BDBC2D43A31B0.xkm
[ 39.975] (II) XKB: reuse xkmfile /var/lib/xkb/server-719093A33B468275582F0A78CA52014F76EC337E.xkm
[ 131.849] (II) XKB: reuse xkmfile /var/lib/xkb/server-7322F64E96E11C1E4CA97145438BDBC2D43A31B0.xkm
[ 131.910] (II) XKB: reuse xkmfile /var/lib/xkb/server-719093A33B468275582F0A78CA52014F76EC337E.xkm
[ 488.145] (II) intel(0): resizing framebuffer to 1280x1024
[ 488.145] (II) intel(0): switch to mode 1024x768@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal
[ 488.187] (II) intel(0): switch to mode 1280x1024@59.9 on pipe 0 using VGA1, position (0, 0), rotation normal
[ 4099.079] (II) XKB: generating xkmfile /var/lib/xkb/server-B0696FACC43D3B503F6A5554EB9B1ED437F9A6B6.xkm
[ 4562.754] (II) XKB: reuse xkmfile /var/lib/xkb/server-B0696FACC43D3B503F6A5554EB9B1ED437F9A6B6.xkm
[ 5037.551] (II) XKB: reuse xkmfile /var/lib/xkb/server-B0696FACC43D3B503F6A5554EB9B1ED437F9A6B6.xkm
[ 6654.990] (II) XKB: reuse xkmfile /var/lib/xkb/server-B0696FACC43D3B503F6A5554EB9B1ED437F9A6B6.xkm
[ 6723.234] (II) XKB: reuse xkmfile /var/lib/xkb/server-B0696FACC43D3B503F6A5554EB9B1ED437F9A6B6.xkm

как-то так

#352180

еще вопрос для появления в списке разрешения экрана 1280х1024 я использую эти команды

xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
xrandr --addmode VGA1 1280x1024_60.00
какая должна быть команда что бы разрешение само установилось?

#352183
tomchita написал:
еще вопрос для появления в списке разрешения экрана 1280х1024 я использую эти команды

xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
xrandr --addmode VGA1 1280x1024_60.00
какая должна быть команда что бы разрешение само установилось?

сначала тебе надо xorg.conf привести в цивилизованный вид
у тебя там полный колхоз дров пытается друг друга сожрать

#352184
Termo написал:
[quote=tomchita]еще вопрос для появления в списке разрешения экрана 1280х1024 я использую эти команды

xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
xrandr --addmode VGA1 1280x1024_60.00
какая должна быть команда что бы разрешение само установилось?

сначала тебе надо xorg.conf привести в цивилизованный вид
у тебя там полный колхоз дров пытается друг друга сожрать[/quote]
Где почитать как правильно сделать? или может вы подскажите что поправить.

#352186
"tomchita" написал:

какая должна быть команда что бы разрешение само установилось?
text
xrandr --output VGA1 --mode 1280x1024_60.00

как-то так, кажется

Ппервой командой (--newmode) вы создаете новый режим, второй (--addmode) добавляете его на определенный выход, третьей - активируете.
И помните, чтоб решить проблему - лучше разобраться с настройками дров, пользуйтесь костылями только если влом заморачиваться.

#352187
text
$ cat /etc/X11/xorg.conf
# mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
# service lxdm stop
# xorg -configure
$ cat /etc/X11/xorg.conf

Также можно попробовать переименовать старый xorg.conf как выше (вторая команда) и перезапустить иксы.

#352189
yars написал:
text
$ cat /etc/X11/xorg.conf
# mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
# service lxdm stop
# xorg -configure
$ cat /etc/X11/xorg.conf

Также можно попробовать переименовать старый xorg.conf как выше (вторая команда) и перезапустить иксы.

смысла в этом нет
получится аналогичный конфиг

#352190
tomchita написал:
Где почитать как правильно сделать? или может вы подскажите что поправить.

почитать можно в гугле
набрав в поиске "Настройка xorg.conf" или "Настройка Xorg"
линукс он как винда только знак иной
в винде драйвера нужно устанавливать
а в линуксе наоборот - выкидывать лишние
просто руками править xorg.conf оставив только драйвер intel
но при этом смотреть чтобы совпали циферки после названия девайсов
скрин0 дисплей0 видекарта0 и т.д.

Войдите или зарегистрируйтесь, чтобы ответить.