Могу посоветовать поднять версию ядра до той, которая в этом дистрибутиве. Есть шанс, что заработает.
LinuxForum.Fans
Linux Mint & Touchpad
Автор: zykov_artem
28 сообщений
3881 просмотров
Могу посоветовать поднять версию ядра до той, которая в этом дистрибутиве. Есть шанс, что заработает.
Попробовал поднять с 3.2.0-4-686-pae до 3.10.10-031010-generic, результат аналогичен...Куда копать дальше не представляю =((
BackTrack5 R3 какое ядро использует? при переходе в районе 3 ядра произошло изменение архитектурі немного и я например столкнулся с проблемой для юсб-камеры, которая ранее работала...))) включили режим экономии энергии для ЮСБ, а моя камера его не поддерживала и сразу вырубалась...))) пересобрав ядро с отключенной опцией все работает. может и тут что-то из этой области... посмотрите какое ядро - скачайте прибилзительно то же с http://kernel.ubuntu.com/~kernel-ppa/mainline/ и посмотрите на результат...
Но уход в слишком старое ядро может привести к старым версиям модулей, например видеокарты.
Но если там будет работать, то будет ясно что дело в ядре. И проанализировав конфиги, может удасться найти отличия которые к этому приводят...
BackTrack5 R3 какое ядро использует?...
И так, рассказываю. В BackTrack5 R3 ядро 3.2.6, по указанной Вами ссылке были установлены и опробованы ядра ближайших версий, а именно 3.2.51 и 3.3.0, в следствии чего было выяснено.
1)проблемы с тачем не исправились а даже на оборот(раньше при сильном давлении он вел себя спокойно, сейчас же при таком же давлении курсор дергается по экрану как ненормальный)
2)на обоих версиях пропадает вкладка настройки тача из "Мышь и сенсорная панель".
Нет ли в сообщениях ядра чего интересного? Посмотрите вывод dmesg.
Нет ли в сообщениях ядра чего интересного? Посмотрите вывод dmesg.
Не совсем понял что конкретно там увидеть, dmesg выдал вот что:
3.2.0-4(родное ядро)
text
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1+deb7u1
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f3b6000 (usable)
[ 0.000000] BIOS-e820: 000000007f3b6000 - 000000007f3fe000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f3fe000 - 000000007f404000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f404000 - 000000007f407000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f407000 - 000000007f42c000 (reserved)
[ 0.000000] BIOS-e820: 000000007f42c000 - 000000007f42d000 (usable)
[ 0.000000] BIOS-e820: 000000007f42d000 - 000000007f437000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f437000 - 000000007f455000 (reserved)
[ 0.000000] BIOS-e820: 000000007f455000 - 000000007f498000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f498000 - 000000007f600000 (usable)
[ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Intel, BIOS P11600 07/05/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F600000 mask FFFF00000 write-through
[ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fcbd0] fcbd0
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[ 0.000000] RAMDISK: 36c94000 - 37642000
[ 0.000000] ACPI: RSDP 000f0420 00024 (v03 CompUX)
[ 0.000000] ACPI: XSDT 7f3fe078 00044 (v01 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 7f402e90 000F4 (v04 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-365)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0x7F433F40/0x000000007F433F80, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 7f3fe150 04D3C (v02 CompUX Dolce 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f433f40 00040
[ 0.000000] ACPI: APIC 7f402f88 00072 (v01 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 7f403000 0003C (v01 A M I ITL 945. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f403040 00038 (v01 CompUX Dolce 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1148MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0007f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007f3b6
[ 0.000000] 0: 0x0007f42c -> 0x0007f42d
[ 0.000000] 0: 0x0007f498 -> 0x0007f600
[ 0.000000] On node 0 totalpages: 521389
[ 0.000000] free_area_init_node: node 0, pgdat c1410740, node_mem_map f5ca4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2297 pages used for memmap
[ 0.000000] HighMem zone: 291368 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b9000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517312
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=82531223-c732-46f8-af68-b38af6f242b4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600)
[ 0.000000] Memory: 2053028k/2086912k available (2852k kernel code, 32528k reserved, 1340k data, 416k init, 1174660k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1419000 - 0xc1481000 ( 416 kB)
[ 0.000000] .data : 0xc12c9000 - 0xc1418100 (1340 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c9000 (2852 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.923 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.84 BogoMIPS (lpj=6651692)
[ 0.004016] pid_max: default: 32768 minimum: 301
[ 0.004107] Security Framework initialized
[ 0.004117] AppArmor: AppArmor disabled by boot time parameter
[ 0.004154] Mount-cache hash table entries: 512
[ 0.004394] Initializing cgroup subsys cpuacct
[ 0.004408] Initializing cgroup subsys memory
[ 0.004426] Initializing cgroup subsys devices
[ 0.004432] Initializing cgroup subsys freezer
[ 0.004437] Initializing cgroup subsys net_cls
[ 0.004443] Initializing cgroup subsys blkio
[ 0.004457] Initializing cgroup subsys perf_event
[ 0.004508] Disabled fast string operations
[ 0.004517] CPU: Physical Processor ID: 0
[ 0.004521] CPU: Processor Core ID: 0
[ 0.004528] mce: CPU supports 5 MCE banks
[ 0.004541] CPU0: Thermal monitoring enabled (TM2)
[ 0.004548] using mwait in idle threads.
[ 0.005096] ACPI: Core revision 20110623
[ 0.013686] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.014088] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.053797] CPU0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz stepping 0a
[ 0.056003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.056003] ... version: 3
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 2
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 000000007fffffff
[ 0.056003] ... fixed-purpose events: 3
[ 0.056003] ... event mask: 0000000700000003
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] CPU 1 irqstacks, hard=f58d4000 soft=f58d6000
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 9a000
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.144069] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144371] CPU 2 irqstacks, hard=f58e6000 soft=f58e8000
[ 0.144377] #2
[ 0.144381] smpboot cpu 2: start_ip = 9a000
[ 0.008000] Initializing CPU#2
[ 0.008000] Disabled fast string operations
[ 0.236014] TSC synchronization [CPU#0 -> CPU#2]:
[ 0.236014] Measured 190 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.236014] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.236056] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.236318] CPU 3 irqstacks, hard=f5916000 soft=f5918000
[ 0.236323] #3 Ok.
[ 0.236327] smpboot cpu 3: start_ip = 9a000
[ 0.008000] Initializing CPU#3
[ 0.008000] Disabled fast string operations
[ 0.324156] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.324211] Brought up 4 CPUs
[ 0.324218] Total of 4 processors activated (13301.86 BogoMIPS).
[ 0.326475] devtmpfs: initialized
[ 0.326475] PM: Registering ACPI NVS region at 7f3b6000 (294912 bytes)
[ 0.326475] PM: Registering ACPI NVS region at 7f404000 (12288 bytes)
[ 0.326475] PM: Registering ACPI NVS region at 7f42d000 (40960 bytes)
[ 0.326475] PM: Registering ACPI NVS region at 7f455000 (274432 bytes)
[ 0.326475] print_constraints: dummy:
[ 0.326475] NET: Registered protocol family 16
[ 0.328060] ACPI: bus type pci registered
[ 0.328248] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.328256] PCI: not using MMCONFIG
[ 0.359679] PCI: Using configuration type 1 for base access
[ 0.361506] bio: create slab <bio-0> at 0
[ 0.361506] ACPI: Added _OSI(Module Device)
[ 0.361506] ACPI: Added _OSI(Processor Device)
[ 0.361506] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.361506] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.364066] ACPI: EC: Look up EC in DSDT
[ 0.366054] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.371589] ACPI: SSDT 7f42ec18 00374 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.372385] ACPI: Dynamic OEM Table Load:
[ 0.372393] ACPI: SSDT (null) 00374 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.400092] ACPI: Interpreter enabled
[ 0.400112] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.400173] ACPI: Using IOAPIC for interrupt routing
[ 0.400234] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.400341] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.400347] PCI: Using MMCONFIG for extended config space
[ 0.417064] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.424098] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.424458] ACPI: No dock devices found.
[ 0.424463] HEST: Table not found.
[ 0.424474] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.424846] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.425148] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.425156] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.425163] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.425170] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xffffffff]
[ 0.425200] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.425265] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.425281] pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff]
[ 0.425292] pci 0000:00:02.0: reg 14: [io 0xf0d0-0xf0d7]
[ 0.425302] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.425313] pci 0000:00:02.0: reg 1c: [mem 0xfe700000-0xfe7fffff]
[ 0.425368] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.425382] pci 0000:00:02.1: reg 10: [mem 0xfea00000-0xfea7ffff]
[ 0.425497] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.425525] pci 0000:00:1b.0: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.425633] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.425678] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.425792] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.425838] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.425951] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.425998] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.426060] pci 0000:00:1d.0: reg 20: [io 0xf060-0xf07f]
[ 0.426112] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.426173] pci 0000:00:1d.1: reg 20: [io 0xf040-0xf05f]
[ 0.426228] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.426289] pci 0000:00:1d.2: reg 20: [io 0x0000-0x001f]
[ 0.426341] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.426402] pci 0000:00:1d.3: reg 20: [io 0xf020-0xf03f]
[ 0.426468] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.426497] pci 0000:00:1d.7: reg 10: [mem 0xfeb05000-0xfeb053ff]
[ 0.426609] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.426644] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.426747] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.426893] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.426918] pci 0000:00:1f.2: reg 10: [io 0xf0c0-0xf0c7]
[ 0.426932] pci 0000:00:1f.2: reg 14: [io 0xf0b0-0xf0b3]
[ 0.426947] pci 0000:00:1f.2: reg 18: [io 0xf0a0-0xf0a7]
[ 0.426962] pci 0000:00:1f.2: reg 1c: [io 0xf090-0xf093]
[ 0.426977] pci 0000:00:1f.2: reg 20: [io 0xf080-0xf08f]
[ 0.426993] pci 0000:00:1f.2: reg 24: [mem 0xfeb04000-0xfeb043ff]
[ 0.427043] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.427073] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.427134] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.427269] pci 0000:01:00.0: [168c:002b] type 0 class 0x000280
[ 0.427303] pci 0000:01:00.0: reg 10: [mem 0xfe900000-0xfe90ffff 64bit]
[ 0.427446] pci 0000:01:00.0: supports D1
[ 0.427451] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.432055] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.432068] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.432174] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.432202] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.432244] pci 0000:02:00.0: reg 18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.432273] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.432292] pci 0000:02:00.0: reg 30: [mem 0xfe800000-0xfe81ffff pref]
[ 0.432382] pci 0000:02:00.0: supports D1 D2
[ 0.432387] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.440053] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.440063] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.440072] pci 0000:00:1c.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.440084] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.440177] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.440195] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.440203] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.440210] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.440217] pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xffffffff] (subtractive decode)
[ 0.440244] pci_bus 0000:00: on NUMA node 0
[ 0.440252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.440505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.440603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PB._PRT]
[ 0.440930] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.441372] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.455659] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.455788] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.455916] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.456061] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.456192] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.456320] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.456445] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.456572] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.456801] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.456801] vgaarb: loaded
[ 0.456801] vgaarb: bridge control possible 0000:00:02.0
[ 0.456801] PCI: Using ACPI for IRQ routing
[ 0.458555] PCI: pci_cache_line_size set to 64 bytes
[ 0.458663] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.458672] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.458679] reserve RAM buffer: 000000007f3b6000 - 000000007fffffff
[ 0.458686] reserve RAM buffer: 000000007f42d000 - 000000007fffffff
[ 0.458693] reserve RAM buffer: 000000007f600000 - 000000007fffffff
[ 0.458970] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.458982] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.458993] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.472175] Switching to clocksource hpet
[ 0.475884] pnp: PnP ACPI init
[ 0.475934] ACPI: bus type pnp registered
[ 0.476139] pnp 00:00: [bus 00-ff]
[ 0.476147] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.476153] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.476159] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.476166] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.476172] pnp 00:00: [mem 0x00000000 window]
[ 0.476178] pnp 00:00: [mem 0x7f700000-0xffffffff window]
[ 0.476317] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.476415] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.476422] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.476541] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.476549] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.476558] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.476629] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.476700] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.477048] pnp 00:03: [io 0x0800-0x087f]
[ 0.477055] pnp 00:03: [io 0x0480-0x04bf]
[ 0.477061] pnp 00:03: [mem 0xfec00000-0xfec00fff]
[ 0.477067] pnp 00:03: [mem 0xfee00000-0xfee00fff]
[ 0.477073] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.477080] pnp 00:03: [mem 0xfed20000-0xfed8ffff]
[ 0.477086] pnp 00:03: [mem 0xfff00000-0xffffffff]
[ 0.477195] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.477203] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.477212] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.477220] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.477228] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.477236] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.477244] system 00:03: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.477252] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.477289] pnp 00:04: [dma 4]
[ 0.477295] pnp 00:04: [io 0x0000-0x000f]
[ 0.477301] pnp 00:04: [io 0x0081-0x0083]
[ 0.477306] pnp 00:04: [io 0x0087]
[ 0.477312] pnp 00:04: [io 0x0089-0x008b]
[ 0.477317] pnp 00:04: [io 0x008f]
[ 0.477322] pnp 00:04: [io 0x00c0-0x00df]
[ 0.477401] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.477511] pnp 00:05: [io 0x0070-0x0071]
[ 0.477586] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.477613] pnp 00:06: [io 0x0061]
[ 0.477689] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.477738] pnp 00:07: [io 0x0010-0x001f]
[ 0.477744] pnp 00:07: [io 0x0022-0x003f]
[ 0.477750] pnp 00:07: [io 0x0044-0x005f]
[ 0.477755] pnp 00:07: [io 0x0063]
[ 0.477761] pnp 00:07: [io 0x0065]
[ 0.477766] pnp 00:07: [io 0x0067-0x006f]
[ 0.477771] pnp 00:07: [io 0x0072-0x007f]
[ 0.477777] pnp 00:07: [io 0x0080]
[ 0.477782] pnp 00:07: [io 0x0084-0x0086]
[ 0.477788] pnp 00:07: [io 0x0088]
[ 0.477796] pnp 00:07: [io 0x008c-0x008e]
[ 0.477802] pnp 00:07: [io 0x0090-0x009f]
[ 0.477807] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.477813] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.477819] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.477848] pnp 00:07: disabling [io 0x0010-0x001f] because it overlaps 0000:00:1d.2 BAR 4 [io 0x0000-0x001f]
[ 0.477952] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.477961] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.477990] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.478008] pnp 00:08: [irq 13]
[ 0.478082] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.478115] pnp 00:09: [irq 12]
[ 0.478196] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.478224] pnp 00:0a: [io 0x0060]
[ 0.478230] pnp 00:0a: [io 0x0064]
[ 0.478241] pnp 00:0a: [irq 1]
[ 0.478316] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.478343] pnp 00:0b: [io 0x0360-0x0361]
[ 0.478452] system 00:0b: [io 0x0360-0x0361] has been reserved
[ 0.478461] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484230] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.484237] pnp 00:0c: [mem 0xfed14000-0xfed17fff]
[ 0.484243] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 0.484249] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 0.484255] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 0.484390] system 00:0c: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.484398] system 00:0c: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.484407] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.484415] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.484423] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.484431] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.484640] pnp 00:0d: [irq 0 disabled]
[ 0.484656] pnp 00:0d: [irq 8]
[ 0.484662] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.484757] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.485162] pnp: PnP ACPI: found 14 devices
[ 0.485167] ACPI: ACPI bus type pnp unregistered
[ 0.485175] PnPBIOS: Disabled by ACPI PNP
[ 0.526767] PCI: max bus depth: 1 pci_try_num: 2
[ 0.526826] pci 0000:00:1d.2: BAR 4: assigned [io 0x1000-0x101f]
[ 0.526841] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.526851] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.526859] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.526866] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.526877] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.526887] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.526900] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.526907] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.526917] pci 0000:00:1c.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.526927] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.526939] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.526991] pci 0000:00:1c.0: setting latency timer to 64
[ 0.527016] pci 0000:00:1c.2: setting latency timer to 64
[ 0.527030] pci 0000:00:1e.0: setting latency timer to 64
[ 0.527039] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.527045] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.527051] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.527058] pci_bus 0000:00: resource 7 [mem 0x7f700000-0xffffffff]
[ 0.527065] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.527071] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.527078] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.527085] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.527091] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.527098] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.527105] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.527111] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.527117] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.527124] pci_bus 0000:03: resource 7 [mem 0x7f700000-0xffffffff]
[ 0.527303] NET: Registered protocol family 2
[ 0.527473] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.528172] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.529098] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.529528] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.529534] TCP reno registered
[ 0.529543] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.529561] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.529843] NET: Registered protocol family 1
[ 0.529885] pci 0000:00:02.0: Boot video device
[ 0.530000] pci 0000:00:1d.2: enabling device (0000 -> 0001)
[ 0.964072] PCI: CLS 64 bytes, default 64
[ 0.964211] Unpacking initramfs...
[ 1.462849] Freeing initrd memory: 9912k freed
[ 1.471973] audit: initializing netlink socket (disabled)
[ 1.472000] type=2000 audit(1382114955.464:1): initialized
[ 1.503126] highmem bounce pool size: 64 pages
[ 1.503138] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.504155] VFS: Disk quotas dquot_6.5.2
[ 1.504241] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.504394] msgmni has been set to 1734
[ 1.504857] alg: No test for stdrng (krng)
[ 1.504942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.504951] io scheduler noop registered
[ 1.504956] io scheduler deadline registered
[ 1.505005] io scheduler cfq registered (default)
[ 1.505196] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.505272] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.505500] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.505565] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 1.505845] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.505852] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.505862] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.505902] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.505909] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.505917] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.505968] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.506059] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
[ 1.506116] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 1.506140] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 8086 ss_did 27d4
[ 1.506198] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 1.506221] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.506226] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.506844] intel_idle: MWAIT substates: 0x20220
[ 1.506867] intel_idle: v0.4 model 0x1C
[ 1.506872] intel_idle: lapic_timer_reliable_states 0x2
[ 1.506957] ERST: Table is not found!
[ 1.506961] GHES: HEST is not enabled!
[ 1.506994] isapnp: Scanning for PnP cards...
[ 1.860539] isapnp: No Plug & Play device found
[ 1.860700] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.864982] Linux agpgart interface v0.103
[ 1.865222] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.865477] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.865823] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.866105] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.866508] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.872472] i8042: Detected active multiplexing controller, rev 1.1
[ 1.874503] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.874518] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.874620] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.874695] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.874770] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.875143] mousedev: PS/2 mouse device common for all mice
[ 1.875263] rtc_cmos 00:05: RTC can wake from S4
[ 1.875469] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.875508] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.875728] cpuidle: using governor ladder
[ 1.876030] cpuidle: using governor menu
[ 1.876651] TCP cubic registered
[ 1.876885] NET: Registered protocol family 10
[ 1.878320] Mobile IPv6
[ 1.878328] NET: Registered protocol family 17
[ 1.878339] Registering the dns_resolver key type
[ 1.878393] Using IPI No-Shortcut mode
[ 1.878758] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.879156] PM: Hibernation image not present or could not be loaded.
[ 1.879185] registered taskstats version 1
[ 1.879992] rtc_cmos 00:05: setting system clock to 2013-10-18 16:49:16 UTC (1382114956)
[ 1.880213] Initializing network drop monitor service
[ 1.880481] Freeing unused kernel memory: 416k freed
[ 1.880897] Write protecting the kernel text: 2852k
[ 1.881001] Write protecting the kernel read-only data: 1084k
[ 1.881006] NX-protecting the kernel data: 3292k
[ 1.910862] udevd[59]: starting version 175
[ 1.987833] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.987931] r8169 0000:02:00.0: setting latency timer to 64
[ 1.988493] usbcore: registered new interface driver usbfs
[ 1.988579] usbcore: registered new interface driver hub
[ 1.988719] usbcore: registered new device driver usb
[ 1.990165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.990264] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.990275] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.990358] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.990415] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.990437] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.991808] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.993275] r8169 0000:02:00.0: eth0: RTL8102e at 0xf820c000, 00:23:81:13:1e:c4, XID 04c00000 IRQ 42
[ 1.994345] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.994412] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb05000
[ 2.012165] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.012252] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.012263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.012271] usb usb1: Product: EHCI Host Controller
[ 2.012278] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.012286] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.012803] hub 1-0:1.0: USB hub found
[ 2.012823] hub 1-0:1.0: 8 ports detected
[ 2.017255] SCSI subsystem initialized
[ 2.029427] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.029579] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.029592] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.029646] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.029710] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[ 2.029847] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.029858] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.029867] usb usb2: Product: UHCI Host Controller
[ 2.029875] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.029883] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.030778] hub 2-0:1.0: USB hub found
[ 2.030798] hub 2-0:1.0: 2 ports detected
[ 2.031072] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.031083] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.031116] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.031206] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[ 2.031336] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.031346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.031355] usb usb3: Product: UHCI Host Controller
[ 2.031363] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.031371] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.033944] hub 3-0:1.0: USB hub found
[ 2.033971] hub 3-0:1.0: 2 ports detected
[ 2.034253] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.034265] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.034303] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.034399] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001000
[ 2.034529] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.034538] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.034546] usb usb4: Product: UHCI Host Controller
[ 2.034553] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.034561] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.035022] hub 4-0:1.0: USB hub found
[ 2.035042] hub 4-0:1.0: 2 ports detected
[ 2.035310] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.035323] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.035354] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.035438] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 2.035558] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.035568] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.035577] usb usb5: Product: UHCI Host Controller
[ 2.035585] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.035593] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.036094] hub 5-0:1.0: USB hub found
[ 2.036114] hub 5-0:1.0: 2 ports detected
[ 2.055542] libata version 3.00 loaded.
[ 2.056977] ata_piix 0000:00:1f.2: version 2.13
[ 2.057017] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.212169] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.213329] scsi0 : ata_piix
[ 2.213711] scsi1 : ata_piix
[ 2.216780] ata1: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf080 irq 19
[ 2.216789] ata2: SATA max UDMA/133 cmd 0xf0a0 ctl 0xf090 bmdma 0xf088 irq 19
[ 2.388527] ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN003J, max UDMA/100
[ 2.388536] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.396520] ata1.00: configured for UDMA/100
[ 2.396817] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS GN00 PQ: 0 ANSI: 5
[ 2.406797] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.406808] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.407050] sd 0:0:0:0: [sda] Write Protect is off
[ 2.407061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.470737] sda: sda1 sda2 < sda5 >
[ 2.471834] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.476328] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.496122] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[ 2.637624] usb 1-8: New USB device found, idVendor=4567, idProduct=6543
[ 2.637632] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.637639] usb 1-8: Product: Boot Flash
[ 2.637644] usb 1-8: Manufacturer: Xaker
[ 2.637649] usb 1-8: SerialNumber: 90D607000000
[ 2.644639] Initializing USB Mass Storage driver...
[ 2.644931] scsi2 : usb-storage 1-8:1.0
[ 2.645119] usbcore: registered new interface driver usb-storage
[ 2.645124] USB Mass Storage support registered.
[ 2.888155] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 3.038556] usb 4-2: New USB device found, idVendor=0cf3, idProduct=3000
[ 3.038564] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.280160] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 3.411428] PM: Starting manual resume from disk
[ 3.411436] PM: Hibernation image partition 8:5 present
[ 3.411441] PM: Looking for hibernation image.
[ 3.411765] PM: Image not found (code -22)
[ 3.411770] PM: Hibernation image not present or could not be loaded.
[ 3.459585] usb 5-1: New USB device found, idVendor=04b4, idProduct=0060
[ 3.459594] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.459601] usb 5-1: Product: USB Device
[ 3.459606] usb 5-1: Manufacturer: Areson
[ 3.489152] input: Areson USB Device as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input1
[ 3.489496] generic-usb 0003:04B4:0060.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:1d.3-1/input0
[ 3.505221] generic-usb 0003:04B4:0060.0002: hiddev0,hidraw1: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:1d.3-1/input1
[ 3.505289] usbcore: registered new interface driver usbhid
[ 3.505296] usbhid: USB HID core driver
[ 3.574298] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.649693] scsi 2:0:0:0: Direct-Access Xaker Boot Flash PMAP PQ: 0 ANSI: 0 CCS
[ 3.651371] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.651998] sd 2:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[ 3.652660] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.652668] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.653253] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.653324] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.656281] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.656349] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.657468] sdb: sdb1
[ 3.659747] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.659817] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.659884] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 5.814653] udevd[359]: starting version 175
[ 6.722973] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.765341] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 6.765368] ACPI: Power Button [PWRB]
[ 6.765627] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 6.765643] ACPI: Sleep Button [SLPB]
[ 6.765867] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 6.765929] ACPI: Lid Switch [LID0]
[ 6.766189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.766206] ACPI: Power Button [PWRF]
[ 6.796436] ACPI: Requesting acpi_cpufreq
[ 6.855859] ACPI: Battery Slot [BAT0] (battery present)
[ 6.861479] ACPI: AC Adapter [AC0] (off-line)
[ 7.277497] coretemp coretemp.0: Using relative temperature scale!
[ 7.277567] coretemp coretemp.0: Using relative temperature scale!
[ 7.583051] iTCO_vendor_support: vendor-support=0
[ 7.617087] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.617368] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 7.618069] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.754922] [drm] Initialized drm 1.1.0 20060810
[ 7.896997] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio2/input/input7
[ 8.014351] cfg80211: Calling CRDA to update world regulatory domain
[ 8.081050] i915 0000:00:02.0: setting latency timer to 64
[ 8.140615] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 8.140628] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.140633] [drm] Driver supports precise vblank timestamp query.
[ 8.140717] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.141429] fixme: max PWM is zero.
[ 8.418933] [drm] initialized overlay support
[ 8.442094] fbcon: inteldrmfb (fb0) is primary device
[ 8.445382] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 8.481598] Bluetooth: Core ver 2.16
[ 8.481665] NET: Registered protocol family 31
[ 8.481671] Bluetooth: HCI device and connection manager initialized
[ 8.481679] Bluetooth: HCI socket layer initialized
[ 8.481686] Bluetooth: L2CAP socket layer initialized
[ 8.481715] Bluetooth: SCO socket layer initialized
[ 8.565040] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 8.612213] ath9k 0000:01:00.0: setting latency timer to 64
[ 8.661092] ath: EEPROM regdomain: 0x60
[ 8.661097] ath: EEPROM indicates we should expect a direct regpair map
[ 8.661104] ath: Country alpha2 being used: 00
[ 8.661107] ath: Regpair used: 0x60
[ 8.711629] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 8.713260] Registered led device: ath9k-phy0
[ 8.713281] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8600000, irq=16
[ 8.790893] usb 4-2: firmware: agent aborted loading ath3k-1.fw (not found?)
[ 8.791063] Bluetooth: Error loading firmware
[ 8.791088] ath3k: probe of 4-2:1.0 failed with error -5
[ 8.791165] usbcore: registered new interface driver ath3k
[ 8.881822] Console: switching to colour frame buffer device 170x48
[ 8.894972] fb0: inteldrmfb frame buffer device
[ 8.894977] drm: registered panic notifier
[ 8.900772] acpi device:1c: registered as cooling_device4
[ 8.903791] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 8.904162] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.904260] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.904486] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.904555] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9.150570] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.150971] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.273531] cfg80211: World regulatory domain updated:
[ 9.273540] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.273548] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.273555] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.273561] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.273568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.273574] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.978685] Adding 948220k swap on /dev/sda5. Priority:-1 extents:1 across:948220k
[ 12.031348] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 12.339439] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.535843] loop: module loaded
[ 15.408844] RPC: Registered named UNIX socket transport module.
[ 15.408852] RPC: Registered udp transport module.
[ 15.408857] RPC: Registered tcp transport module.
[ 15.408861] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.494613] FS-Cache: Loaded
[ 15.515744] r8169 0000:02:00.0: eth0: link down
[ 15.516196] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.581138] FS-Cache: Netfs 'nfs' registered for caching
[ 15.601460] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.670101] Bluetooth: RFCOMM TTY layer initialized
[ 20.670119] Bluetooth: RFCOMM socket layer initialized
[ 20.670125] Bluetooth: RFCOMM ver 1.11
[ 20.788825] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.788839] Bluetooth: BNEP filters: protocol multicast
[ 21.962176] ADDRCONF(NETDEV_UP): wlan0: link is not ready
3.3.0
text
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.0-030300-generic (apw@gomeisa) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #201203182135 SMP Mon Mar 19 01:43:18 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f3b6000 (usable)
[ 0.000000] BIOS-e820: 000000007f3b6000 - 000000007f3fe000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f3fe000 - 000000007f404000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f404000 - 000000007f407000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f407000 - 000000007f42c000 (reserved)
[ 0.000000] BIOS-e820: 000000007f42c000 - 000000007f42d000 (usable)
[ 0.000000] BIOS-e820: 000000007f42d000 - 000000007f437000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f437000 - 000000007f455000 (reserved)
[ 0.000000] BIOS-e820: 000000007f455000 - 000000007f498000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f498000 - 000000007f600000 (usable)
[ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Intel, BIOS P11600 07/05/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F600000 mask FFFF00000 write-through
[ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fcbd0] fcbd0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 36b42000 - 37599000
[ 0.000000] ACPI: RSDP 000f0420 00024 (v03 CompUX)
[ 0.000000] ACPI: XSDT 7f3fe078 00044 (v01 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 7f402e90 000F4 (v04 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20120111/tbfadt-382)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0x7F433F40/0x000000007F433F80, using 32 (20120111/tbfadt-502)
[ 0.000000] ACPI: DSDT 7f3fe150 04D3C (v02 CompUX Dolce 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f433f40 00040
[ 0.000000] ACPI: APIC 7f402f88 00072 (v01 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 7f403000 0003C (v01 A M I ITL 945. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f403040 00038 (v01 CompUX Dolce 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007f3b6
[ 0.000000] 0: 0x0007f42c -> 0x0007f42d
[ 0.000000] 0: 0x0007f498 -> 0x0007f600
[ 0.000000] On node 0 totalpages: 521389
[ 0.000000] free_area_init_node: node 0, pgdat c181d3c0, node_mem_map f5b52200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 291876 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s30976 r0 d22272 u1048576
[ 0.000000] pcpu-alloc: s30976 r0 d22272 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517312
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0-030300-generic root=UUID=82531223-c732-46f8-af68-b38af6f242b4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4173696 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f600)
[ 0.000000] Memory: 2043528k/2086912k available (5609k kernel code, 42028k reserved, 2741k data, 712k init, 1176708k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1828000 - 0xc18da000 ( 712 kB)
[ 0.000000] .data : 0xc157a6f9 - 0xc1827b80 (2741 kB)
[ 0.000000] .text : 0xc1000000 - 0xc157a6f9 (5609 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.712 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.42 BogoMIPS (lpj=6650848)
[ 0.004016] pid_max: default: 32768 minimum: 301
[ 0.004071] Security Framework initialized
[ 0.004105] AppArmor: AppArmor initialized
[ 0.004213] Mount-cache hash table entries: 512
[ 0.008045] Initializing cgroup subsys cpuacct
[ 0.008053] Initializing cgroup subsys memory
[ 0.008072] Initializing cgroup subsys devices
[ 0.008078] Initializing cgroup subsys freezer
[ 0.008084] Initializing cgroup subsys blkio
[ 0.008100] Initializing cgroup subsys perf_event
[ 0.008144] Disabled fast string operations
[ 0.008153] CPU: Physical Processor ID: 0
[ 0.008157] CPU: Processor Core ID: 0
[ 0.008163] mce: CPU supports 5 MCE banks
[ 0.008180] CPU0: Thermal monitoring enabled (TM2)
[ 0.008188] using mwait in idle threads.
[ 0.012434] ACPI: Core revision 20120111
[ 0.019878] ftrace: allocating 24146 entries in 48 pages
[ 0.036134] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036541] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.076529] CPU0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz stepping 0a
[ 0.080004] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.080004] ... version: 3
[ 0.080004] ... bit width: 40
[ 0.080004] ... generic registers: 2
[ 0.080004] ... value mask: 000000ffffffffff
[ 0.080004] ... max period: 000000007fffffff
[ 0.080004] ... fixed-purpose events: 3
[ 0.080004] ... event mask: 0000000700000003
[ 0.080004] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.080004] CPU 1 irqstacks, hard=f5104000 soft=f5106000
[ 0.080004] Booting Node 0, Processors #1
[ 0.080004] smpboot cpu 1: start_ip = 9a000
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.092073] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.092326] CPU 2 irqstacks, hard=f5112000 soft=f5114000
[ 0.092332] #2
[ 0.092336] smpboot cpu 2: start_ip = 9a000
[ 0.008000] Initializing CPU#2
[ 0.008000] Disabled fast string operations
[ 0.104005] TSC synchronization [CPU#0 -> CPU#2]:
[ 0.104005] Measured 180 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.104005] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.104052] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.104284] CPU 3 irqstacks, hard=f5128000 soft=f512a000
[ 0.104290] #3 Ok.
[ 0.104294] smpboot cpu 3: start_ip = 9a000
[ 0.008000] Initializing CPU#3
[ 0.008000] Disabled fast string operations
[ 0.118769] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.118833] Brought up 4 CPUs
[ 0.118840] Total of 4 processors activated (13301.69 BogoMIPS).
[ 0.120383] devtmpfs: initialized
[ 0.120383] EVM: security.selinux
[ 0.120383] EVM: security.SMACK64
[ 0.120383] EVM: security.capability
[ 0.120397] PM: Registering ACPI NVS region at 7f3b6000 (294912 bytes)
[ 0.120397] PM: Registering ACPI NVS region at 7f404000 (12288 bytes)
[ 0.120397] PM: Registering ACPI NVS region at 7f42d000 (40960 bytes)
[ 0.120397] PM: Registering ACPI NVS region at 7f455000 (274432 bytes)
[ 0.125069] print_constraints: dummy:
[ 0.125122] RTC time: 17:16:04, date: 10/18/13
[ 0.125209] NET: Registered protocol family 16
[ 0.125497] EISA bus registered
[ 0.125567] ACPI: bus type pci registered
[ 0.125731] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.125739] PCI: not using MMCONFIG
[ 0.157000] PCI: Using configuration type 1 for base access
[ 0.160093] bio: create slab <bio-0> at 0
[ 0.160159] ACPI: Added _OSI(Module Device)
[ 0.160159] ACPI: Added _OSI(Processor Device)
[ 0.160159] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.160162] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.162089] ACPI: EC: Look up EC in DSDT
[ 0.164361] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.169332] ACPI: SSDT 7f42ec18 00374 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.170092] ACPI: Dynamic OEM Table Load:
[ 0.170101] ACPI: SSDT (null) 00374 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.184086] ACPI: Interpreter enabled
[ 0.184107] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.184160] ACPI: Using IOAPIC for interrupt routing
[ 0.184233] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.184355] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.184361] PCI: Using MMCONFIG for extended config space
[ 0.200943] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.207360] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.207713] ACPI: No dock devices found.
[ 0.207727] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.208125] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.208316] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.208324] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.208331] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.208338] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xffffffff]
[ 0.208438] PCI host bridge to bus 0000:00
[ 0.208445] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.208451] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.208458] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.208464] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xffffffff]
[ 0.208492] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.208558] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.208575] pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff]
[ 0.208586] pci 0000:00:02.0: reg 14: [io 0xf0d0-0xf0d7]
[ 0.208596] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.208607] pci 0000:00:02.0: reg 1c: [mem 0xfe700000-0xfe7fffff]
[ 0.208661] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.208675] pci 0000:00:02.1: reg 10: [mem 0xfea00000-0xfea7ffff]
[ 0.208792] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.208820] pci 0000:00:1b.0: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.208932] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.208974] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.209090] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.209136] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.209251] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.209298] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.209360] pci 0000:00:1d.0: reg 20: [io 0xf060-0xf07f]
[ 0.209414] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.209477] pci 0000:00:1d.1: reg 20: [io 0xf040-0xf05f]
[ 0.209530] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.209593] pci 0000:00:1d.2: reg 20: [io 0x0000-0x001f]
[ 0.209646] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.209709] pci 0000:00:1d.3: reg 20: [io 0xf020-0xf03f]
[ 0.209774] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.209804] pci 0000:00:1d.7: reg 10: [mem 0xfeb05000-0xfeb053ff]
[ 0.209917] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.209952] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.210054] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.210203] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.210227] pci 0000:00:1f.2: reg 10: [io 0xf0c0-0xf0c7]
[ 0.210243] pci 0000:00:1f.2: reg 14: [io 0xf0b0-0xf0b3]
[ 0.210259] pci 0000:00:1f.2: reg 18: [io 0xf0a0-0xf0a7]
[ 0.210275] pci 0000:00:1f.2: reg 1c: [io 0xf090-0xf093]
[ 0.210290] pci 0000:00:1f.2: reg 20: [io 0xf080-0xf08f]
[ 0.210307] pci 0000:00:1f.2: reg 24: [mem 0xfeb04000-0xfeb043ff]
[ 0.210356] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.210384] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.210447] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.210586] pci 0000:01:00.0: [168c:002b] type 0 class 0x000280
[ 0.210622] pci 0000:01:00.0: reg 10: [mem 0xfe900000-0xfe90ffff 64bit]
[ 0.210770] pci 0000:01:00.0: supports D1
[ 0.210775] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.216044] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.216057] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.216164] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.216190] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.216232] pci 0000:02:00.0: reg 18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.216259] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.216280] pci 0000:02:00.0: reg 30: [mem 0xfe800000-0xfe81ffff pref]
[ 0.216370] pci 0000:02:00.0: supports D1 D2
[ 0.216375] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224041] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.224051] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.224060] pci 0000:00:1c.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.224072] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.224163] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.224182] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.224189] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.224196] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.224203] pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xffffffff] (subtractive decode)
[ 0.224230] pci_bus 0000:00: on NUMA node 0
[ 0.224239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.224473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.224563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PB._PRT]
[ 0.224877] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.225277] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.238032] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.238159] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.238284] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.238406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.238528] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.238652] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.238781] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.238906] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.239117] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.239117] vgaarb: loaded
[ 0.239117] vgaarb: bridge control possible 0000:00:02.0
[ 0.239117] SCSI subsystem initialized
[ 0.239117] libata version 3.00 loaded.
[ 0.239117] usbcore: registered new interface driver usbfs
[ 0.240034] usbcore: registered new interface driver hub
[ 0.240083] usbcore: registered new device driver usb
[ 0.240197] PCI: Using ACPI for IRQ routing
[ 0.242486] PCI: pci_cache_line_size set to 64 bytes
[ 0.242585] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.242594] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.242600] reserve RAM buffer: 000000007f3b6000 - 000000007fffffff
[ 0.242609] reserve RAM buffer: 000000007f42d000 - 000000007fffffff
[ 0.242616] reserve RAM buffer: 000000007f600000 - 000000007fffffff
[ 0.242872] NetLabel: Initializing
[ 0.242877] NetLabel: domain hash size = 128
[ 0.242881] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.242906] NetLabel: unlabeled traffic allowed by default
[ 0.242964] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.242964] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.242964] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.254774] Switching to clocksource hpet
[ 0.271348] AppArmor: AppArmor Filesystem Enabled
[ 0.271409] pnp: PnP ACPI init
[ 0.271454] ACPI: bus type pnp registered
[ 0.271627] pnp 00:00: [bus 00-ff]
[ 0.271634] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.271641] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.271647] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.271654] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.271660] pnp 00:00: [mem 0x00000000 window]
[ 0.271666] pnp 00:00: [mem 0x7f700000-0xffffffff window]
[ 0.271793] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.271890] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.271897] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.272039] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.272048] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.272058] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.272131] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.272204] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.272528] pnp 00:03: [io 0x0800-0x087f]
[ 0.272534] pnp 00:03: [io 0x0480-0x04bf]
[ 0.272541] pnp 00:03: [mem 0xfec00000-0xfec00fff]
[ 0.272547] pnp 00:03: [mem 0xfee00000-0xfee00fff]
[ 0.272552] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.272558] pnp 00:03: [mem 0xfed20000-0xfed8ffff]
[ 0.272564] pnp 00:03: [mem 0xfff00000-0xffffffff]
[ 0.272665] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.272673] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.272681] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.272689] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.272696] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.272704] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.272711] system 00:03: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.272720] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.272756] pnp 00:04: [dma 4]
[ 0.272762] pnp 00:04: [io 0x0000-0x000f]
[ 0.272768] pnp 00:04: [io 0x0081-0x0083]
[ 0.272773] pnp 00:04: [io 0x0087]
[ 0.272778] pnp 00:04: [io 0x0089-0x008b]
[ 0.272784] pnp 00:04: [io 0x008f]
[ 0.272789] pnp 00:04: [io 0x00c0-0x00df]
[ 0.272859] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.272964] pnp 00:05: [io 0x0070-0x0071]
[ 0.273034] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.273060] pnp 00:06: [io 0x0061]
[ 0.273127] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.273176] pnp 00:07: [io 0x0010-0x001f]
[ 0.273183] pnp 00:07: [io 0x0022-0x003f]
[ 0.273188] pnp 00:07: [io 0x0044-0x005f]
[ 0.273193] pnp 00:07: [io 0x0063]
[ 0.273198] pnp 00:07: [io 0x0065]
[ 0.273204] pnp 00:07: [io 0x0067-0x006f]
[ 0.273209] pnp 00:07: [io 0x0072-0x007f]
[ 0.273214] pnp 00:07: [io 0x0080]
[ 0.273220] pnp 00:07: [io 0x0084-0x0086]
[ 0.273225] pnp 00:07: [io 0x0088]
[ 0.273230] pnp 00:07: [io 0x008c-0x008e]
[ 0.273235] pnp 00:07: [io 0x0090-0x009f]
[ 0.273241] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.273246] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.273251] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.273277] pnp 00:07: disabling [io 0x0010-0x001f] because it overlaps 0000:00:1d.2 BAR 4 [io 0x0000-0x001f]
[ 0.273374] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.273383] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.273411] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.273432] pnp 00:08: [irq 13]
[ 0.273501] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.273534] pnp 00:09: [irq 12]
[ 0.273603] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.273631] pnp 00:0a: [io 0x0060]
[ 0.273636] pnp 00:0a: [io 0x0064]
[ 0.273648] pnp 00:0a: [irq 1]
[ 0.273721] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.273747] pnp 00:0b: [io 0x0360-0x0361]
[ 0.273846] system 00:0b: [io 0x0360-0x0361] has been reserved
[ 0.273855] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280229] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.280237] pnp 00:0c: [mem 0xfed14000-0xfed17fff]
[ 0.280243] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 0.280249] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 0.280254] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 0.280390] system 00:0c: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.280399] system 00:0c: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.280406] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.280413] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.280421] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.280430] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280634] pnp 00:0d: [irq 0 disabled]
[ 0.280651] pnp 00:0d: [irq 8]
[ 0.280657] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.280749] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.281135] pnp: PnP ACPI: found 14 devices
[ 0.281141] ACPI: ACPI bus type pnp unregistered
[ 0.281148] PnPBIOS: Disabled by ACPI PNP
[ 0.322691] PCI: max bus depth: 1 pci_try_num: 2
[ 0.322745] pci 0000:00:1d.2: BAR 4: assigned [io 0x1000-0x101f]
[ 0.322758] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.322767] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.322775] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.322782] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.322793] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.322802] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.322815] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.322822] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.322832] pci 0000:00:1c.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.322842] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.322854] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.322929] pci 0000:00:1e.0: setting latency timer to 64
[ 0.322938] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.322945] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.322951] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.322957] pci_bus 0000:00: resource 7 [mem 0x7f700000-0xffffffff]
[ 0.322964] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.322970] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.322977] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.322984] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.322990] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.322997] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.323004] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.323010] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.323016] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.323023] pci_bus 0000:03: resource 7 [mem 0x7f700000-0xffffffff]
[ 0.323103] NET: Registered protocol family 2
[ 0.323259] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.323813] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.324787] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.325218] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.325224] TCP reno registered
[ 0.325234] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.325253] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.325447] NET: Registered protocol family 1
[ 0.325486] pci 0000:00:02.0: Boot video device
[ 0.325607] pci 0000:00:1d.2: enabling device (0000 -> 0001)
[ 0.756076] PCI: CLS 64 bytes, default 64
[ 0.756194] Trying to unpack rootfs image as initramfs...
[ 1.290539] Freeing initrd memory: 10588k freed
[ 1.300276] audit: initializing netlink socket (disabled)
[ 1.300302] type=2000 audit(1382116565.296:1): initialized
[ 1.347150] highmem bounce pool size: 64 pages
[ 1.347163] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.352079] VFS: Disk quotas dquot_6.5.2
[ 1.352231] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.353660] fuse init (API version 7.18)
[ 1.353919] msgmni has been set to 1713
[ 1.355132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.355223] io scheduler noop registered
[ 1.355231] io scheduler deadline registered
[ 1.355256] io scheduler cfq registered (default)
[ 1.355599] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.355874] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 1.356185] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.356193] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.356202] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.356241] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.356248] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.356257] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.356302] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.356392] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
[ 1.356438] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 1.356461] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 8086 ss_did 27d4
[ 1.356508] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 1.356528] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.356683] intel_idle: MWAIT substates: 0x20220
[ 1.356711] intel_idle: v0.4 model 0x1C
[ 1.356717] intel_idle: lapic_timer_reliable_states 0x2
[ 1.364076] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.372083] ACPI: AC Adapter [AC0] (off-line)
[ 1.372314] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.372327] ACPI: Power Button [PWRB]
[ 1.372439] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.372449] ACPI: Sleep Button [SLPB]
[ 1.372569] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.372606] ACPI: Lid Switch [LID0]
[ 1.372717] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.372726] ACPI: Power Button [PWRF]
[ 1.390131] GHES: HEST is not enabled!
[ 1.390182] isapnp: Scanning for PnP cards...
[ 1.417392] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.417419] ACPI: Battery Slot [BAT0] (battery present)
[ 1.743721] isapnp: No Plug & Play device found
[ 1.743969] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.748204] Linux agpgart interface v0.103
[ 1.748361] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.748596] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.748921] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.749219] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.753337] brd: module loaded
[ 1.755448] loop: module loaded
[ 1.755794] ata_piix 0000:00:1f.2: version 2.13
[ 1.755825] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.908051] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.908801] scsi0 : ata_piix
[ 1.909027] scsi1 : ata_piix
[ 1.911425] ata1: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf080 irq 19
[ 1.911434] ata2: SATA max UDMA/133 cmd 0xf0a0 ctl 0xf090 bmdma 0xf088 irq 19
[ 1.912475] Fixed MDIO Bus: probed
[ 1.912534] tun: Universal TUN/TAP device driver, 1.6
[ 1.912540] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.912720] PPP generic driver version 2.4.2
[ 1.913037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.913108] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.913117] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.913244] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.913282] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.913300] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.917204] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.917243] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb05000
[ 1.928037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.928383] hub 1-0:1.0: USB hub found
[ 1.928396] hub 1-0:1.0: 8 ports detected
[ 1.928575] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.928611] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.928668] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.928676] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.928822] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.928864] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[ 1.929230] hub 2-0:1.0: USB hub found
[ 1.929242] hub 2-0:1.0: 2 ports detected
[ 1.929402] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.929410] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.929552] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.929599] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[ 1.929951] hub 3-0:1.0: USB hub found
[ 1.929962] hub 3-0:1.0: 2 ports detected
[ 1.930107] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.930115] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.930250] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.930310] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001000
[ 1.930660] hub 4-0:1.0: USB hub found
[ 1.930671] hub 4-0:1.0: 2 ports detected
[ 1.930826] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.930834] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.930981] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.931043] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 1.931396] hub 5-0:1.0: USB hub found
[ 1.931411] hub 5-0:1.0: 2 ports detected
[ 1.931676] usbcore: registered new interface driver libusual
[ 1.931809] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.938932] i8042: Detected active multiplexing controller, rev 1.1
[ 1.941826] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.941843] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.941936] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.942013] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.942080] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.942476] mousedev: PS/2 mouse device common for all mice
[ 1.943086] rtc_cmos 00:05: RTC can wake from S4
[ 1.943321] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.943363] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.943541] device-mapper: uevent: version 1.0.3
[ 1.943749] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.943851] EISA: Probing bus 0 at eisa.0
[ 1.943858] EISA: Cannot allocate resource for mainboard
[ 1.943864] Cannot allocate resource for EISA slot 1
[ 1.943870] Cannot allocate resource for EISA slot 2
[ 1.943876] Cannot allocate resource for EISA slot 3
[ 1.943881] Cannot allocate resource for EISA slot 4
[ 1.943887] Cannot allocate resource for EISA slot 5
[ 1.943892] Cannot allocate resource for EISA slot 6
[ 1.943898] Cannot allocate resource for EISA slot 7
[ 1.943903] Cannot allocate resource for EISA slot 8
[ 1.943908] EISA: Detected 0 cards.
[ 1.943925] cpufreq-nforce2: No nForce2 chipset.
[ 1.944142] cpuidle: using governor ladder
[ 1.944392] cpuidle: using governor menu
[ 1.944398] EFI Variables Facility v0.08 2004-May-17
[ 1.945009] TCP cubic registered
[ 1.945307] NET: Registered protocol family 10
[ 1.946651] NET: Registered protocol family 17
[ 1.946699] Registering the dns_resolver key type
[ 1.946753] Using IPI No-Shortcut mode
[ 1.947113] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.947219] PM: Hibernation image not present or could not be loaded.
[ 1.947258] registered taskstats version 1
[ 1.964250] Magic number: 1:899:289
[ 1.964319] tty tty22: hash matches
[ 1.964427] rtc_cmos 00:05: setting system clock to 2013-10-18 17:16:06 UTC (1382116566)
[ 1.966495] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.966501] EDD information not available.
[ 2.075570] ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN003J, max UDMA/100
[ 2.075579] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.080598] ata1.00: configured for UDMA/100
[ 2.080931] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS GN00 PQ: 0 ANSI: 5
[ 2.081347] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.081355] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.081376] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.081599] sd 0:0:0:0: [sda] Write Protect is off
[ 2.081610] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.081713] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.145375] sda: sda1 sda2 < sda5 >
[ 2.146507] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.146600] Freeing unused kernel memory: 712k freed
[ 2.147154] Write protecting the kernel text: 5612k
[ 2.147259] Write protecting the kernel read-only data: 2300k
[ 2.175712] udevd[94]: starting version 175
[ 2.279827] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.280125] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 2.281587] r8169 0000:02:00.0: eth0: RTL8102e at 0xf801c000, 00:23:81:13:1e:c4, XID 04c00000 IRQ 42
[ 2.408078] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[ 2.553595] Initializing USB Mass Storage driver...
[ 2.554248] scsi2 : usb-storage 1-8:1.0
[ 2.554471] usbcore: registered new interface driver usb-storage
[ 2.554477] USB Mass Storage support registered.
[ 2.556236] usbcore: registered new interface driver uas
[ 2.695853] PM: Starting manual resume from disk
[ 2.695862] PM: Hibernation image partition 8:5 present
[ 2.695867] PM: Looking for hibernation image.
[ 2.696244] PM: Image not found (code -22)
[ 2.696250] PM: Hibernation image not present or could not be loaded.
[ 2.788065] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.806676] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.180096] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 3.553651] scsi 2:0:0:0: Direct-Access Xaker Boot Flash PMAP PQ: 0 ANSI: 0 CCS
[ 3.555527] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.556141] sd 2:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[ 3.556744] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.556757] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.557412] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.557483] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.560979] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.561035] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.562216] sdb: sdb1
[ 3.564585] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.564643] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.564699] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 5.104622] udevd[374]: starting version 175
[ 5.981421] evbug: Connected device: input0 (Power Button at PNP0C0C/button/input0)
[ 5.981471] evbug: Connected device: input1 (Sleep Button at PNP0C0E/button/input0)
[ 5.981483] evbug: Connected device: input2 (Lid Switch at PNP0C0D/button/input0)
[ 5.981492] evbug: Connected device: input3 (Power Button at LNXPWRBN/button/input0)
[ 5.981501] evbug: Connected device: input4 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 6.033623] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.034330] evbug: Connected device: input5 (PC Speaker at isa0061/input0)
[ 6.098359] iTCO_vendor_support: vendor-support=0
[ 6.125615] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.125867] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 6.126119] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.441149] psmouse serio2: hgpk: ID: 15 00 64
[ 6.895012] cfg80211: Calling CRDA to update world regulatory domain
[ 7.001684] [drm] Initialized drm 1.1.0 20060810
[ 7.138360] i915 0000:00:02.0: setting latency timer to 64
[ 7.194986] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 7.195008] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.195014] [drm] Driver supports precise vblank timestamp query.
[ 7.195086] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.205743] fixme: max PWM is zero.
[ 7.444846] ath: EEPROM regdomain: 0x60
[ 7.444853] ath: EEPROM indicates we should expect a direct regpair map
[ 7.444861] ath: Country alpha2 being used: 00
[ 7.444865] ath: Regpair used: 0x60
[ 7.444872] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444887] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444895] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444901] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444908] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444914] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444922] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444928] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444935] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444941] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444949] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444955] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444962] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444968] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444976] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444982] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 7.444990] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.444996] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 7.445003] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.445009] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 7.445017] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.445023] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 7.445030] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.445036] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 7.445044] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.445050] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 7.445057] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 7.447304] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 7.478619] [drm] initialized overlay support
[ 7.479915] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.481779] Registered led device: ath9k-phy0
[ 7.481805] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8260000, irq=16
[ 7.502397] fbcon: inteldrmfb (fb0) is primary device
[ 7.504686] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 7.791309] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio2/input/input6
[ 7.791636] evbug: Connected device: input6 (ImPS/2 Generic Wheel Mouse at isa0060/serio2/input0)
[ 7.952868] Console: switching to colour frame buffer device 170x48
[ 7.967144] fb0: inteldrmfb frame buffer device
[ 7.967150] drm: registered panic notifier
[ 7.973092] acpi device:1d: registered as cooling_device4
[ 7.975425] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.975597] evbug: Connected device: input7 (Video Bus at LNXVIDEO/video/input0)
[ 7.975605] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.975699] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.125195] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 8.497395] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.497600] evbug: Connected device: input8 (HDA Intel Mic at ALSA)
[ 8.497765] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.497912] evbug: Connected device: input9 (HDA Intel Headphone at ALSA)
[ 8.610221] Bluetooth: Core ver 2.16
[ 8.610290] NET: Registered protocol family 31
[ 8.610298] Bluetooth: HCI device and connection manager initialized
[ 8.610307] Bluetooth: HCI socket layer initialized
[ 8.610314] Bluetooth: L2CAP socket layer initialized
[ 8.610349] Bluetooth: SCO socket layer initialized
[ 8.837117] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 8.837129] cfg80211: World regulatory domain updated:
[ 8.837134] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.837142] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.837149] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.837156] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.837163] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.837170] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.087861] Bluetooth: Firmware file "ath3k-1.fw" not found
[ 9.088072] ath3k: probe of 4-2:1.0 failed with error -2
[ 9.088160] usbcore: registered new interface driver ath3k
[ 9.618422] input: Areson USB Device as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input10
[ 9.618848] evbug: Connected device: input10 (Areson USB Device at usb-0000:00:1d.3-1/input0)
[ 9.619118] generic-usb 0003:04B4:0060.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:1d.3-1/input0
[ 9.637079] generic-usb 0003:04B4:0060.0002: hiddev0,hidraw1: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:1d.3-1/input1
[ 9.637165] usbcore: registered new interface driver usbhid
[ 9.637173] usbhid: USB HID core driver
[ 9.703490] usbcore: registered new interface driver usbmouse
[ 11.553150] Adding 948220k swap on /dev/sda5. Priority:-1 extents:1 across:948220k
[ 11.586968] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.863973] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.153982] RPC: Registered named UNIX socket transport module.
[ 14.153989] RPC: Registered udp transport module.
[ 14.153994] RPC: Registered tcp transport module.
[ 14.153998] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.229585] FS-Cache: Loaded
[ 14.312395] FS-Cache: Netfs 'nfs' registered for caching
[ 14.322416] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 14.724005] r8169 0000:02:00.0: eth0: link down
[ 14.724645] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.823363] Bluetooth: RFCOMM TTY layer initialized
[ 19.823382] Bluetooth: RFCOMM socket layer initialized
[ 19.823390] Bluetooth: RFCOMM ver 1.11
[ 19.919373] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.919381] Bluetooth: BNEP filters: protocol multicast
[ 21.018568] ADDRCONF(NETDEV_UP): wlan0: link is not ready
3.2.51(в этот раз тач работал)
text
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.51-030251-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201309101035 SMP Tue Sep 10 15:17:52 UTC 2013
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f3b6000 (usable)
[ 0.000000] BIOS-e820: 000000007f3b6000 - 000000007f3fe000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f3fe000 - 000000007f404000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f404000 - 000000007f407000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f407000 - 000000007f42c000 (reserved)
[ 0.000000] BIOS-e820: 000000007f42c000 - 000000007f42d000 (usable)
[ 0.000000] BIOS-e820: 000000007f42d000 - 000000007f437000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f437000 - 000000007f455000 (reserved)
[ 0.000000] BIOS-e820: 000000007f455000 - 000000007f498000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f498000 - 000000007f600000 (usable)
[ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Intel, BIOS P11600 07/05/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F600000 mask FFFF00000 write-through
[ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fcbd0] fcbd0
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bf8000-1c00000
[ 0.000000] RAMDISK: 36b22000 - 37589000
[ 0.000000] ACPI: RSDP 000f0420 00024 (v03 CompUX)
[ 0.000000] ACPI: XSDT 7f3fe078 00044 (v01 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 7f402e90 000F4 (v04 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-365)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0x7F433F40/0x000000007F433F80, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 7f3fe150 04D3C (v02 CompUX Dolce 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f433f40 00040
[ 0.000000] ACPI: APIC 7f402f88 00072 (v01 CompUX Dolce 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 7f403000 0003C (v01 A M I ITL 945. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f403040 00038 (v01 CompUX Dolce 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007f3b6
[ 0.000000] 0: 0x0007f42c -> 0x0007f42d
[ 0.000000] 0: 0x0007f498 -> 0x0007f600
[ 0.000000] On node 0 totalpages: 521389
[ 0.000000] free_area_init_node: node 0, pgdat c1821580, node_mem_map f5b32200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2301 pages used for memmap
[ 0.000000] HighMem zone: 291876 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77bd000 s31552 r0 d21696 u53248
[ 0.000000] pcpu-alloc: s31552 r0 d21696 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517312
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.51-030251-generic root=UUID=82531223-c732-46f8-af68-b38af6f242b4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8347392 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f600)
[ 0.000000] Memory: 2039368k/2086912k available (5615k kernel code, 46188k reserved, 2759k data, 712k init, 1176708k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc182e000 - 0xc18e0000 ( 712 kB)
[ 0.000000] .data : 0xc157be04 - 0xc182dc80 (2759 kB)
[ 0.000000] .text : 0xc1000000 - 0xc157be04 (5615 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4c0a000 soft=f4c0c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1663.015 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.03 BogoMIPS (lpj=6652060)
[ 0.004016] pid_max: default: 32768 minimum: 301
[ 0.004075] Security Framework initialized
[ 0.004109] AppArmor: AppArmor initialized
[ 0.004219] Mount-cache hash table entries: 512
[ 0.004495] Initializing cgroup subsys cpuacct
[ 0.004511] Initializing cgroup subsys memory
[ 0.004529] Initializing cgroup subsys devices
[ 0.004535] Initializing cgroup subsys freezer
[ 0.004540] Initializing cgroup subsys blkio
[ 0.004555] Initializing cgroup subsys perf_event
[ 0.004600] Disabled fast string operations
[ 0.004609] CPU: Physical Processor ID: 0
[ 0.004614] CPU: Processor Core ID: 0
[ 0.004621] mce: CPU supports 5 MCE banks
[ 0.004638] CPU0: Thermal monitoring enabled (TM2)
[ 0.004646] using mwait in idle threads.
[ 0.010070] ACPI: Core revision 20110623
[ 0.017627] ftrace: allocating 25417 entries in 50 pages
[ 0.020100] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024159] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.063857] CPU0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz stepping 0a
[ 0.064003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.064003] ... version: 3
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] CPU 1 irqstacks, hard=f4cf2000 soft=f4cf4000
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.152071] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152334] CPU 2 irqstacks, hard=f4d20000 soft=f4d22000
[ 0.152340] #2
[ 0.152345] smpboot cpu 2: start_ip = 9a000
[ 0.008000] Initializing CPU#2
[ 0.008000] Disabled fast string operations
[ 0.244014] TSC synchronization [CPU#0 -> CPU#2]:
[ 0.244014] Measured 200 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.244014] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.244056] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.244284] CPU 3 irqstacks, hard=f4d2e000 soft=f4d38000
[ 0.244290] #3 Ok.
[ 0.244294] smpboot cpu 3: start_ip = 9a000
[ 0.008000] Initializing CPU#3
[ 0.008000] Disabled fast string operations
[ 0.332120] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332178] Brought up 4 CPUs
[ 0.332185] Total of 4 processors activated (13302.04 BogoMIPS).
[ 0.334480] devtmpfs: initialized
[ 0.334480] EVM: security.selinux
[ 0.334480] EVM: security.SMACK64
[ 0.334480] EVM: security.capability
[ 0.334480] PM: Registering ACPI NVS region at 7f3b6000 (294912 bytes)
[ 0.334480] PM: Registering ACPI NVS region at 7f404000 (12288 bytes)
[ 0.334480] PM: Registering ACPI NVS region at 7f42d000 (40960 bytes)
[ 0.334480] PM: Registering ACPI NVS region at 7f455000 (274432 bytes)
[ 0.338281] print_constraints: dummy:
[ 0.338333] RTC time: 17:19:05, date: 10/18/13
[ 0.338419] NET: Registered protocol family 16
[ 0.338745] EISA bus registered
[ 0.338825] ACPI: bus type pci registered
[ 0.339000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.339009] PCI: not using MMCONFIG
[ 0.369781] PCI: Using configuration type 1 for base access
[ 0.373032] bio: create slab <bio-0> at 0
[ 0.373032] ACPI: Added _OSI(Module Device)
[ 0.373032] ACPI: Added _OSI(Processor Device)
[ 0.373032] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.373032] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.374213] ACPI: EC: Look up EC in DSDT
[ 0.377712] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.382907] ACPI: SSDT 7f42ec18 00374 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.383700] ACPI: Dynamic OEM Table Load:
[ 0.383709] ACPI: SSDT (null) 00374 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.412095] ACPI: Interpreter enabled
[ 0.412115] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.412173] ACPI: Using IOAPIC for interrupt routing
[ 0.412235] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.412338] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.412344] PCI: Using MMCONFIG for extended config space
[ 0.429041] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.435773] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.436148] ACPI: No dock devices found.
[ 0.436155] HEST: Table not found.
[ 0.436166] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.436526] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.436816] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.436825] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.436832] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.436839] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xffffffff]
[ 0.436867] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.436932] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.436950] pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff]
[ 0.436961] pci 0000:00:02.0: reg 14: [io 0xf0d0-0xf0d7]
[ 0.436972] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.436982] pci 0000:00:02.0: reg 1c: [mem 0xfe700000-0xfe7fffff]
[ 0.437036] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.437051] pci 0000:00:02.1: reg 10: [mem 0xfea00000-0xfea7ffff]
[ 0.437167] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.437195] pci 0000:00:1b.0: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.437305] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.437314] pci 0000:00:1b.0: PME# disabled
[ 0.437353] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.437468] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.437477] pci 0000:00:1c.0: PME# disabled
[ 0.437519] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.437634] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.437643] pci 0000:00:1c.2: PME# disabled
[ 0.437686] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.437748] pci 0000:00:1d.0: reg 20: [io 0xf060-0xf07f]
[ 0.437802] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.437865] pci 0000:00:1d.1: reg 20: [io 0xf040-0xf05f]
[ 0.437919] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.437981] pci 0000:00:1d.2: reg 20: [io 0x0000-0x001f]
[ 0.438035] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.438097] pci 0000:00:1d.3: reg 20: [io 0xf020-0xf03f]
[ 0.438163] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.438192] pci 0000:00:1d.7: reg 10: [mem 0xfeb05000-0xfeb053ff]
[ 0.438306] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.438315] pci 0000:00:1d.7: PME# disabled
[ 0.438346] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.438451] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.438598] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.438624] pci 0000:00:1f.2: reg 10: [io 0xf0c0-0xf0c7]
[ 0.438640] pci 0000:00:1f.2: reg 14: [io 0xf0b0-0xf0b3]
[ 0.438656] pci 0000:00:1f.2: reg 18: [io 0xf0a0-0xf0a7]
[ 0.438671] pci 0000:00:1f.2: reg 1c: [io 0xf090-0xf093]
[ 0.438687] pci 0000:00:1f.2: reg 20: [io 0xf080-0xf08f]
[ 0.438703] pci 0000:00:1f.2: reg 24: [mem 0xfeb04000-0xfeb043ff]
[ 0.438753] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.438762] pci 0000:00:1f.2: PME# disabled
[ 0.438792] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.438856] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.438993] pci 0000:01:00.0: [168c:002b] type 0 class 0x000280
[ 0.439029] pci 0000:01:00.0: reg 10: [mem 0xfe900000-0xfe90ffff 64bit]
[ 0.439175] pci 0000:01:00.0: supports D1
[ 0.439181] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.439190] pci 0000:01:00.0: PME# disabled
[ 0.444059] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.444072] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.444185] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.444212] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.444253] pci 0000:02:00.0: reg 18: [mem 0xd0010000-0xd0010fff 64bit pref]
[ 0.444280] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref]
[ 0.444300] pci 0000:02:00.0: reg 30: [mem 0xfe800000-0xfe81ffff pref]
[ 0.444389] pci 0000:02:00.0: supports D1 D2
[ 0.444394] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.444404] pci 0000:02:00.0: PME# disabled
[ 0.452055] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.452065] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.452074] pci 0000:00:1c.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.452086] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.452194] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.452213] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.452220] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.452227] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.452234] pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xffffffff] (subtractive decode)
[ 0.452261] pci_bus 0000:00: on NUMA node 0
[ 0.452270] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.452509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.452608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PB._PRT]
[ 0.452917] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.453327] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.468657] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.468784] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.468910] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.469033] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.469156] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.469281] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.469406] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.469531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.469750] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.469750] vgaarb: loaded
[ 0.469750] vgaarb: bridge control possible 0000:00:02.0
[ 0.469750] i2c-core: driver [aat2870] using legacy suspend method
[ 0.469750] i2c-core: driver [aat2870] using legacy resume method
[ 0.469750] SCSI subsystem initialized
[ 0.470297] libata version 3.00 loaded.
[ 0.470297] usbcore: registered new interface driver usbfs
[ 0.470297] usbcore: registered new interface driver hub
[ 0.470297] usbcore: registered new device driver usb
[ 0.470297] PCI: Using ACPI for IRQ routing
[ 0.473448] PCI: pci_cache_line_size set to 64 bytes
[ 0.473554] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.473562] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.473569] reserve RAM buffer: 000000007f3b6000 - 000000007fffffff
[ 0.473576] reserve RAM buffer: 000000007f42d000 - 000000007fffffff
[ 0.473582] reserve RAM buffer: 000000007f600000 - 000000007fffffff
[ 0.473859] NetLabel: Initializing
[ 0.473865] NetLabel: domain hash size = 128
[ 0.473869] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.473895] NetLabel: unlabeled traffic allowed by default
[ 0.473956] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.473956] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.473956] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.484140] Switching to clocksource hpet
[ 0.500643] AppArmor: AppArmor Filesystem Enabled
[ 0.500706] pnp: PnP ACPI init
[ 0.500745] ACPI: bus type pnp registered
[ 0.500917] pnp 00:00: [bus 00-ff]
[ 0.500925] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.500931] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.500937] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.500944] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.500950] pnp 00:00: [mem 0x00000000 window]
[ 0.500956] pnp 00:00: [mem 0x7f700000-0xffffffff window]
[ 0.501098] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.501195] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.501202] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.501308] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.501316] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.501325] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.501394] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.501471] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.501798] pnp 00:03: [io 0x0800-0x087f]
[ 0.501809] pnp 00:03: [io 0x0480-0x04bf]
[ 0.501815] pnp 00:03: [mem 0xfec00000-0xfec00fff]
[ 0.501821] pnp 00:03: [mem 0xfee00000-0xfee00fff]
[ 0.501827] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.501832] pnp 00:03: [mem 0xfed20000-0xfed8ffff]
[ 0.501838] pnp 00:03: [mem 0xfff00000-0xffffffff]
[ 0.501943] system 00:03: [io 0x0800-0x087f] has been reserved
[ 0.501951] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.501959] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.501967] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.501974] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.501982] system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.501989] system 00:03: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.501998] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.502033] pnp 00:04: [dma 4]
[ 0.502039] pnp 00:04: [io 0x0000-0x000f]
[ 0.502045] pnp 00:04: [io 0x0081-0x0083]
[ 0.502050] pnp 00:04: [io 0x0087]
[ 0.502055] pnp 00:04: [io 0x0089-0x008b]
[ 0.502060] pnp 00:04: [io 0x008f]
[ 0.502065] pnp 00:04: [io 0x00c0-0x00df]
[ 0.502135] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.502241] pnp 00:05: [io 0x0070-0x0071]
[ 0.502319] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.502346] pnp 00:06: [io 0x0061]
[ 0.502416] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.502465] pnp 00:07: [io 0x0010-0x001f]
[ 0.502472] pnp 00:07: [io 0x0022-0x003f]
[ 0.502477] pnp 00:07: [io 0x0044-0x005f]
[ 0.502482] pnp 00:07: [io 0x0063]
[ 0.502487] pnp 00:07: [io 0x0065]
[ 0.502492] pnp 00:07: [io 0x0067-0x006f]
[ 0.502497] pnp 00:07: [io 0x0072-0x007f]
[ 0.502503] pnp 00:07: [io 0x0080]
[ 0.502508] pnp 00:07: [io 0x0084-0x0086]
[ 0.502513] pnp 00:07: [io 0x0088]
[ 0.502518] pnp 00:07: [io 0x008c-0x008e]
[ 0.502523] pnp 00:07: [io 0x0090-0x009f]
[ 0.502528] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.502534] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.502539] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.502566] pnp 00:07: disabling [io 0x0010-0x001f] because it overlaps 0000:00:1d.2 BAR 4 [io 0x0000-0x001f]
[ 0.502664] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.502673] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.502700] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.502720] pnp 00:08: [irq 13]
[ 0.502811] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.502844] pnp 00:09: [irq 12]
[ 0.502917] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.502944] pnp 00:0a: [io 0x0060]
[ 0.502950] pnp 00:0a: [io 0x0064]
[ 0.502961] pnp 00:0a: [irq 1]
[ 0.503038] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.503064] pnp 00:0b: [io 0x0360-0x0361]
[ 0.503167] system 00:0b: [io 0x0360-0x0361] has been reserved
[ 0.503176] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.508228] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.508236] pnp 00:0c: [mem 0xfed14000-0xfed17fff]
[ 0.508242] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 0.508247] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 0.508253] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 0.508389] system 00:0c: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.508397] system 00:0c: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.508405] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.508412] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.508420] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.508429] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.508629] pnp 00:0d: [irq 0 disabled]
[ 0.508647] pnp 00:0d: [irq 8]
[ 0.508653] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 0.508753] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.509150] pnp: PnP ACPI: found 14 devices
[ 0.509156] ACPI: ACPI bus type pnp unregistered
[ 0.509164] PnPBIOS: Disabled by ACPI PNP
[ 0.550824] PCI: max bus depth: 1 pci_try_num: 2
[ 0.550878] pci 0000:00:1d.2: BAR 4: assigned [io 0x1000-0x101f]
[ 0.550890] pci 0000:00:1d.2: BAR 4: set to [io 0x1000-0x101f] (PCI address [0x1000-0x101f])
[ 0.550901] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.550910] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.550917] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.550924] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.550935] pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.550945] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.550958] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 0.550965] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.550976] pci 0000:00:1c.2: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.550985] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.550998] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.551050] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.551061] pci 0000:00:1c.0: setting latency timer to 64
[ 0.551085] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.551094] pci 0000:00:1c.2: setting latency timer to 64
[ 0.551108] pci 0000:00:1e.0: setting latency timer to 64
[ 0.551117] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.551123] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.551129] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.551136] pci_bus 0000:00: resource 7 [mem 0x7f700000-0xffffffff]
[ 0.551143] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.551149] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.551156] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.551163] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.551169] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.551176] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.551183] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.551190] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.551196] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.551203] pci_bus 0000:03: resource 7 [mem 0x7f700000-0xffffffff]
[ 0.551286] NET: Registered protocol family 2
[ 0.551430] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.551976] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.552944] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.553372] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.553378] TCP reno registered
[ 0.553387] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.553407] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.553610] NET: Registered protocol family 1
[ 0.553651] pci 0000:00:02.0: Boot video device
[ 0.553709] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.553736] pci 0000:00:1d.0: PCI INT A disabled
[ 0.553761] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.553785] pci 0000:00:1d.1: PCI INT B disabled
[ 0.553800] pci 0000:00:1d.2: enabling device (0000 -> 0001)
[ 0.553809] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.553831] pci 0000:00:1d.2: PCI INT C disabled
[ 0.553847] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.553870] pci 0000:00:1d.3: PCI INT D disabled
[ 0.553887] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.984055] pci 0000:00:1d.7: PCI INT A disabled
[ 0.984089] PCI: CLS 64 bytes, default 64
[ 0.984229] Trying to unpack rootfs image as initramfs...
[ 1.504104] Freeing initrd memory: 10652k freed
[ 1.513703] audit: initializing netlink socket (disabled)
[ 1.513729] type=2000 audit(1382116746.508:1): initialized
[ 1.561325] highmem bounce pool size: 64 pages
[ 1.561338] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.566261] VFS: Disk quotas dquot_6.5.2
[ 1.566410] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.567859] fuse init (API version 7.17)
[ 1.568156] msgmni has been set to 1705
[ 1.569223] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.569311] io scheduler noop registered
[ 1.569317] io scheduler deadline registered
[ 1.569336] io scheduler cfq registered (default)
[ 1.569610] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.569688] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.569915] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.569981] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 1.570252] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.570259] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.570269] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.570309] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.570315] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.570325] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.570375] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.570465] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
[ 1.570529] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 1.570553] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 8086 ss_did 27d4
[ 1.570608] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 1.570631] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.570801] intel_idle: MWAIT substates: 0x20220
[ 1.570826] intel_idle: v0.4 model 0x1C
[ 1.570831] intel_idle: lapic_timer_reliable_states 0x2
[ 1.576086] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.584100] ACPI: AC Adapter [AC0] (off-line)
[ 1.584339] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.584351] ACPI: Power Button [PWRB]
[ 1.584469] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.584481] ACPI: Sleep Button [SLPB]
[ 1.584596] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.584633] ACPI: Lid Switch [LID0]
[ 1.584747] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.584756] ACPI: Power Button [PWRF]
[ 1.602204] ERST: Table is not found!
[ 1.602211] GHES: HEST is not enabled!
[ 1.602259] isapnp: Scanning for PnP cards...
[ 1.628969] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.628997] ACPI: Battery Slot [BAT0] (battery present)
[ 1.955764] isapnp: No Plug & Play device found
[ 1.956026] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.988909] Linux agpgart interface v0.103
[ 1.989084] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.989333] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.989664] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.989957] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.994210] brd: module loaded
[ 1.996476] loop: module loaded
[ 1.996867] ata_piix 0000:00:1f.2: version 2.13
[ 1.996897] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.996908] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.152049] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.152812] scsi0 : ata_piix
[ 2.153029] scsi1 : ata_piix
[ 2.155539] ata1: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf080 irq 19
[ 2.155547] ata2: SATA max UDMA/133 cmd 0xf0a0 ctl 0xf090 bmdma 0xf088 irq 19
[ 2.156736] Fixed MDIO Bus: probed
[ 2.156805] tun: Universal TUN/TAP device driver, 1.6
[ 2.156810] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.156981] PPP generic driver version 2.4.2
[ 2.157277] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.157322] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.157362] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.157369] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.157495] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.157535] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.157553] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.161449] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.161489] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb05000
[ 2.176037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.176389] hub 1-0:1.0: USB hub found
[ 2.176402] hub 1-0:1.0: 8 ports detected
[ 2.176580] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.176618] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.176669] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.176687] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.176694] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.176830] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.176872] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
[ 2.177223] hub 2-0:1.0: USB hub found
[ 2.177235] hub 2-0:1.0: 2 ports detected
[ 2.177383] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.177400] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.177407] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.177533] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.177574] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
[ 2.177913] hub 3-0:1.0: USB hub found
[ 2.177924] hub 3-0:1.0: 2 ports detected
[ 2.178068] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.178084] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.178092] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.178218] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.178281] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001000
[ 2.178623] hub 4-0:1.0: USB hub found
[ 2.178635] hub 4-0:1.0: 2 ports detected
[ 2.178777] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.178794] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.178801] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.178924] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.178983] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 2.179335] hub 5-0:1.0: USB hub found
[ 2.179347] hub 5-0:1.0: 2 ports detected
[ 2.179627] usbcore: registered new interface driver libusual
[ 2.179750] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.190017] i8042: Detected active multiplexing controller, rev 1.1
[ 2.192486] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.192504] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.192606] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.192682] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.192762] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.193143] mousedev: PS/2 mouse device common for all mice
[ 2.193735] rtc_cmos 00:05: RTC can wake from S4
[ 2.193955] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.193996] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.194187] device-mapper: uevent: version 1.0.3
[ 2.194417] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.194480] EISA: Probing bus 0 at eisa.0
[ 2.194487] EISA: Cannot allocate resource for mainboard
[ 2.194494] Cannot allocate resource for EISA slot 1
[ 2.194500] Cannot allocate resource for EISA slot 2
[ 2.194505] Cannot allocate resource for EISA slot 3
[ 2.194511] Cannot allocate resource for EISA slot 4
[ 2.194516] Cannot allocate resource for EISA slot 5
[ 2.194522] Cannot allocate resource for EISA slot 6
[ 2.194528] Cannot allocate resource for EISA slot 7
[ 2.194533] Cannot allocate resource for EISA slot 8
[ 2.194538] EISA: Detected 0 cards.
[ 2.194556] cpufreq-nforce2: No nForce2 chipset.
[ 2.194891] cpuidle: using governor ladder
[ 2.195448] cpuidle: using governor menu
[ 2.195454] EFI Variables Facility v0.08 2004-May-17
[ 2.196064] TCP cubic registered
[ 2.196427] NET: Registered protocol family 10
[ 2.197776] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.198344] NET: Registered protocol family 17
[ 2.198357] Registering the dns_resolver key type
[ 2.198429] Using IPI No-Shortcut mode
[ 2.198801] PM: Hibernation image not present or could not be loaded.
[ 2.198828] registered taskstats version 1
[ 2.215335] Magic number: 1:452:340
[ 2.215497] rtc_cmos 00:05: setting system clock to 2013-10-18 17:19:07 UTC (1382116747)
[ 2.217614] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.217620] EDD information not available.
[ 2.320248] ata1.00: ATA-8: TOSHIBA MK3259GSXP, GN003J, max UDMA/100
[ 2.320258] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.328514] ata1.00: configured for UDMA/100
[ 2.328832] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3259GS GN00 PQ: 0 ANSI: 5
[ 2.329233] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.329242] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.329283] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.329399] sd 0:0:0:0: [sda] Write Protect is off
[ 2.329408] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.329494] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.393304] sda: sda1 sda2 < sda5 >
[ 2.394310] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.394399] Freeing unused kernel memory: 712k freed
[ 2.394952] Write protecting the kernel text: 5616k
[ 2.395059] Write protecting the kernel read-only data: 2316k
[ 2.422994] udevd[94]: starting version 175
[ 2.524135] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.524204] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.524273] r8169 0000:02:00.0: setting latency timer to 64
[ 2.524382] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 2.526009] r8169 0000:02:00.0: eth0: RTL8102e at 0xf801c000, 00:23:81:13:1e:c4, XID 04c00000 IRQ 42
[ 2.872073] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 3.276084] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 3.483362] input: Areson USB Device as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input5
[ 3.483830] generic-usb 0003:04B4:0060.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:1d.3-1/input0
[ 3.498487] generic-usb 0003:04B4:0060.0002: hiddev0,hidraw1: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:1d.3-1/input1
[ 3.498566] usbcore: registered new interface driver usbhid
[ 3.498574] usbhid: USB HID core driver
[ 3.500858] usbcore: registered new interface driver usbmouse
[ 3.500869] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[ 3.502342] PM: Starting manual resume from disk
[ 3.502355] PM: Hibernation image partition 8:5 present
[ 3.502362] PM: Looking for hibernation image.
[ 3.503046] PM: Image not found (code -22)
[ 3.503055] PM: Hibernation image not present or could not be loaded.
[ 3.669386] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.911388] udevd[368]: starting version 175
[ 6.784481] evbug: Connected device: input0 (Power Button at PNP0C0C/button/input0)
[ 6.784495] evbug: Connected device: input1 (Sleep Button at PNP0C0E/button/input0)
[ 6.784506] evbug: Connected device: input2 (Lid Switch at PNP0C0D/button/input0)
[ 6.784516] evbug: Connected device: input3 (Power Button at LNXPWRBN/button/input0)
[ 6.784527] evbug: Connected device: input4 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[ 6.784559] evbug: Connected device: input5 (Areson USB Device at usb-0000:00:1d.3-1/input0)
[ 6.792143] evbug: Event. Dev: input5, Type: 2, Code: 0, Value: -34
[ 6.792161] evbug: Event. Dev: input5, Type: 2, Code: 1, Value: 18
[ 6.792184] evbug: Event. Dev: input5, Type: 0, Code: 0, Value: 0
[ 6.800145] evbug: Event. Dev: input5, Type: 2, Code: 0, Value: -10
[ 6.800164] evbug: Event. Dev: input5, Type: 2, Code: 1, Value: 6
[ 6.800189] evbug: Event. Dev: input5, Type: 0, Code: 0, Value: 0
[ 6.803910] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.804177] evbug: Connected device: input6 (PC Speaker at isa0061/input0)
[ 7.262729] psmouse serio2: hgpk: ID: 15 00 64
[ 7.710185] cfg80211: Calling CRDA to update world regulatory domain
[ 7.858461] iTCO_vendor_support: vendor-support=0
[ 7.859847] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.860163] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 7.860382] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.972385] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.355254] [drm] Initialized drm 1.1.0 20060810
[ 8.563228] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio2/input/input7
[ 8.563490] evbug: Connected device: input7 (ImPS/2 Generic Wheel Mouse at isa0060/serio2/input0)
[ 8.862969] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.863081] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 8.863134] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.922013] ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.922039] ath9k 0000:01:00.0: setting latency timer to 64
[ 8.950123] Bluetooth: Core ver 2.16
[ 8.950194] NET: Registered protocol family 31
[ 8.950201] Bluetooth: HCI device and connection manager initialized
[ 8.950209] Bluetooth: HCI socket layer initialized
[ 8.950215] Bluetooth: L2CAP socket layer initialized
[ 8.950750] Bluetooth: SCO socket layer initialized
[ 8.970931] ath: EEPROM regdomain: 0x60
[ 8.970938] ath: EEPROM indicates we should expect a direct regpair map
[ 8.970946] ath: Country alpha2 being used: 00
[ 8.970951] ath: Regpair used: 0x60
[ 8.970958] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 8.970966] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.970972] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 8.970979] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.970985] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 8.970993] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.970999] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971006] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971012] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971025] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971033] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971038] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971046] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971052] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971059] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971065] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971072] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971078] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971086] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971092] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971099] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971105] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971112] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971118] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971126] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.971132] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 8.971139] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 8.973285] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 9.026087] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.027692] Registered led device: ath9k-phy0
[ 9.027716] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8500000, irq=16
[ 9.033913] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 9.370339] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 9.370479] evbug: Connected device: input8 (HDA Intel Mic at ALSA)
[ 9.370624] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.370753] evbug: Connected device: input9 (HDA Intel Headphone at ALSA)
[ 9.371134] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.371147] i915 0000:00:02.0: setting latency timer to 64
[ 9.431123] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 9.431135] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.431140] [drm] Driver supports precise vblank timestamp query.
[ 9.431218] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 9.433900] fixme: max PWM is zero.
[ 9.433913] Bluetooth: Error loading firmware
[ 9.433996] ath3k: probe of 4-2:1.0 failed with error -5
[ 9.434061] usbcore: registered new interface driver ath3k
[ 9.706474] [drm] initialized overlay support
[ 9.734403] fbcon: inteldrmfb (fb0) is primary device
[ 9.736737] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 10.018365] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 10.018373] cfg80211: World regulatory domain updated:
[ 10.018377] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.018384] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.018390] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.018396] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.018402] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.018407] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.152902] Console: switching to colour frame buffer device 170x48
[ 10.165671] fb0: inteldrmfb frame buffer device
[ 10.165677] drm: registered panic notifier
[ 10.171575] acpi device:1c: registered as cooling_device4
[ 10.173559] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 10.173733] evbug: Connected device: input10 (Video Bus at LNXVIDEO/video/input0)
[ 10.173744] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.173864] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.278917] Adding 948220k swap on /dev/sda5. Priority:-1 extents:1 across:948220k
[ 12.312114] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 12.605420] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.988706] RPC: Registered named UNIX socket transport module.
[ 14.988715] RPC: Registered udp transport module.
[ 14.988720] RPC: Registered tcp transport module.
[ 14.988724] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.072807] FS-Cache: Loaded
[ 15.204217] FS-Cache: Netfs 'nfs' registered for caching
[ 15.264331] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.287965] r8169 0000:02:00.0: eth0: link down
[ 15.288504] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.002542] Bluetooth: RFCOMM TTY layer initialized
[ 20.002563] Bluetooth: RFCOMM socket layer initialized
[ 20.002571] Bluetooth: RFCOMM ver 1.11
[ 20.545156] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.545167] Bluetooth: BNEP filters: protocol multicast
и да, в момент, когда загрузился чтобы забрать логи ядра 3.2.51, тач завелся и работал адекватно,но при перезапуске опять начал вести себя как не пойми что...мистика какая-то =)
Войдите или зарегистрируйтесь, чтобы ответить.
