Странно, но в последнее время, в частночти примерно после установки обновлений iptables и dchp, ( это мои подозрения ). начались проблемы с сетью интернет.
Модем TP-Link, настроен в режиме роутер.
Mint 13 Nadia.
Примерно уже вторую неделю происходит следующее. Постоянный разрыв связи. И разрыв именно проводного соединения и именно в Минт.
При этом соединение по wi-fi присутствует. И в Live CD с которого я кстати пишу, соединение тоже присуствует.
А вот на установленной ОС, дисконнект. И даже иногда нет связи компьютера с портами модема. Нет возможности войти в настройки модема по адресу
192.168.1.1
С чем это связанно не понимаю. Так как не програмист. Но глюк присутствует.
LinuxForum.Fans
Проблемы с сетью интернет.
Автор: Userboy
25 сообщений
3319 просмотров
Порт падает? Что в логах?
У вас модем?. Тоисть у вас ADSL?
У вас модем?. Тоисть у вас ADSL?
Да, ADSL модем TP-Link. Настроен в режиме роутера.
Порт падает? Что в логах?
А как посмотреть логи?
Полное название модема
TP-Link TD-W8901G
А если попробовать настроить модем бриджем, PPPoE поднять на компе, будут ли разрывы.
А если попробовать настроить модем бриджем, PPPoE поднять на компе, будут ли разрывы.
Я уже думал об этом. Но не могу найти пароль. Где то он у меня записан. Последний раз год назад его пользовал. А для перенастройки в бридж - нужен пароль.
Да и роутером надёжнее.
А если попробовать настроить модем бриджем, PPPoE поднять на компе, будут ли разрывы.
Вот сейчас пишу с Live CD Ubuntu, никаких разрывов нет. И инет работает шустро.
А как посмотреть логи?
dmesg, /var/log/messages, но не уверен, что это есть в убунте. Сейчас проверить не могу.
[quote=Userboy] А как посмотреть логи?
dmesg, /var/log/messages, но не уверен, что это есть в убунте. Сейчас проверить не могу.[/quote]
text
[ 0.175770] pci 0000:00:1c.4: >PCI bridge to [bus 02-02]
[ 0.175773] pci 0000:00:1c.4: > bridge window [io 0xa000-0xafff]
[ 0.175778] pci 0000:00:1c.4: > bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.175783] pci 0000:00:1c.4: > bridge window [mem 0xbc600000-0xbc7fffff 64bit pref]
[ 0.175789] pci 0000:00:1e.0: >PCI bridge to [bus 05-05]
[ 0.175825] pci 0000:00:1c.0: >enabling device (0106 -> 0107)
[ 0.175845] pci 0000:00:1e.0: >setting latency timer to 64
[ 0.175849] pci_bus 0000:00: >resource 4 [io 0x0000-0xffff]
[ 0.175851] pci_bus 0000:00: >resource 5 [mem 0x00000000-0xfffffffff]
[ 0.175853] pci_bus 0000:01: >resource 0 [io 0x9000-0x9fff]
[ 0.175856] pci_bus 0000:01: >resource 1 [mem 0xf8800000-0xfe8fffff]
[ 0.175858] pci_bus 0000:01: >resource 2 [mem 0xbfe00000-0xdfdfffff 64bit pref]
[ 0.175861] pci_bus 0000:04: >resource 0 [io 0x1000-0x1fff]
[ 0.175863] pci_bus 0000:04: >resource 1 [mem 0xbc000000-0xbc3fffff]
[ 0.175865] pci_bus 0000:04: >resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.175868] pci_bus 0000:03: >resource 0 [io 0xb000-0xbfff]
[ 0.175870] pci_bus 0000:03: >resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.175873] pci_bus 0000:03: >resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.175875] pci_bus 0000:02: >resource 0 [io 0xa000-0xafff]
[ 0.175877] pci_bus 0000:02: >resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.175880] pci_bus 0000:02: >resource 2 [mem 0xbc600000-0xbc7fffff 64bit pref]
[ 0.175882] pci_bus 0000:05: >resource 4 [io 0x0000-0xffff]
[ 0.175884] pci_bus 0000:05: >resource 5 [mem 0x00000000-0xfffffffff]
[ 0.175928] NET: Registered protocol family 2
[ 0.175995] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.176183] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.176652] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.176902] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.176904] TCP: reno registered
[ 0.176907] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.176920] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.177000] NET: Registered protocol family 1
[ 0.351733] Freeing initrd memory: 14708k freed
[ 0.384232] pci 0000:01:00.0: >Boot video device
[ 0.384248] PCI: CLS 32 bytes, default 64
[ 0.384713] audit: initializing netlink socket (disabled)
[ 0.384729] type=2000 audit(1368269643.384:1): initialized
[ 0.404348] highmem bounce pool size: 64 pages
[ 0.404362] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.406168] VFS: Disk quotas dquot_6.5.2
[ 0.406216] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.406755] fuse init (API version 7.19)
[ 0.406837] msgmni has been set to 1701
[ 0.407180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.407206] io scheduler noop registered
[ 0.407208] io scheduler deadline registered (default)
[ 0.407215] io scheduler cfq registered
[ 0.407358] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[ 0.407438] pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
[ 0.407530] pcieport 0000:00:1c.3: >irq 42 for MSI/MSI-X
[ 0.407619] pcieport 0000:00:1c.4: >irq 43 for MSI/MSI-X
[ 0.407696] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.407716] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.407789] intel_idle: does not run on family 6 model 15
[ 0.407871] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.407876] ACPI: Power Button [PWRB]
[ 0.407919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.407922] ACPI: Power Button [PWRF]
[ 0.408028] ACPI: Requesting acpi_cpufreq
[ 0.411825] GHES: HEST is not enabled!
[ 0.411850] isapnp: Scanning for PnP cards...
[ 0.412048] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.432387] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.453632] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.453893] Linux agpgart interface v0.103
[ 0.455462] brd: module loaded
[ 0.456155] loop: module loaded
[ 0.456266] ahci 0000:02:00.0: >version 3.0
[ 0.472038] ahci 0000:02:00.0: >AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.472041] ahci 0000:02:00.0: >flags: 64bit ncq pm led clo pmp pio slum part
[ 0.472350] scsi0 : ahci
[ 0.472422] scsi1 : ahci
[ 0.472507] ata1: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16
[ 0.472511] ata2: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16
[ 0.472538] ata_piix 0000:00:1f.2: >version 2.13
[ 0.472549] ata_piix 0000:00:1f.2: >MAP [
[ 0.472550] P0 P2 P1 P3 ]
[ 0.628025] ata_piix 0000:00:1f.2: >setting latency timer to 64
[ 0.628278] scsi2 : ata_piix
[ 0.628329] scsi3 : ata_piix
[ 0.629771] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[ 0.629776] ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[ 0.629793] ata_piix 0000:00:1f.5: >MAP [
[ 0.629794] P0 -- P1 -- ]
[ 0.629831] ata_piix 0000:00:1f.5: >setting latency timer to 64
[ 0.630078] scsi4 : ata_piix
[ 0.630130] scsi5 : ata_piix
[ 0.631171] ata5: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
[ 0.631175] ata6: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
[ 0.631218] pata_acpi 0000:02:00.1: >enabling device (0000 -> 0001)
[ 0.631248] pata_acpi 0000:02:00.1: >setting latency timer to 64
[ 0.631538] Fixed MDIO Bus: probed
[ 0.631583] tun: Universal TUN/TAP device driver, 1.6
[ 0.631584] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.631637] PPP generic driver version 2.4.2
[ 0.631676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.631705] ehci_hcd 0000:00:1a.7: >setting latency timer to 64
[ 0.631709] ehci_hcd 0000:00:1a.7: >EHCI Host Controller
[ 0.631714] ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
[ 0.631736] ehci_hcd 0000:00:1a.7: >debug port 1
[ 0.635635] ehci_hcd 0000:00:1a.7: >cache line size of 32 is not supported
[ 0.635649] ehci_hcd 0000:00:1a.7: >irq 18, io mem 0xfebffc00
[ 0.644014] ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
[ 0.644035] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.644038] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.644040] usb usb1: >Product: EHCI Host Controller
[ 0.644043] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.644045] usb usb1: >SerialNumber: 0000:00:1a.7
[ 0.644141] hub 1-0:1.0: >USB hub found
[ 0.644146] hub 1-0:1.0: >4 ports detected
[ 0.644227] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[ 0.644230] ehci_hcd 0000:00:1d.7: >EHCI Host Controller
[ 0.644237] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
[ 0.644259] ehci_hcd 0000:00:1d.7: >debug port 1
[ 0.648150] ehci_hcd 0000:00:1d.7: >cache line size of 32 is not supported
[ 0.648164] ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xfebff800
[ 0.660013] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
[ 0.660030] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.660032] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.660034] usb usb2: >Product: EHCI Host Controller
[ 0.660037] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.660039] usb usb2: >SerialNumber: 0000:00:1d.7
[ 0.660124] hub 2-0:1.0: >USB hub found
[ 0.660127] hub 2-0:1.0: >6 ports detected
[ 0.660195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.660215] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.660235] uhci_hcd 0000:00:1a.0: >setting latency timer to 64
[ 0.660238] uhci_hcd 0000:00:1a.0: >UHCI Host Controller
[ 0.660243] uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
[ 0.660264] uhci_hcd 0000:00:1a.0: >irq 16, io base 0x0000dc00
[ 0.660292] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.660295] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.660297] usb usb3: >Product: UHCI Host Controller
[ 0.660299] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.660301] usb usb3: >SerialNumber: 0000:00:1a.0
[ 0.660382] hub 3-0:1.0: >USB hub found
[ 0.660389] hub 3-0:1.0: >2 ports detected
[ 0.660456] uhci_hcd 0000:00:1a.1: >setting latency timer to 64
[ 0.660459] uhci_hcd 0000:00:1a.1: >UHCI Host Controller
[ 0.660464] uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
[ 0.660493] uhci_hcd 0000:00:1a.1: >irq 17, io base 0x0000e000
[ 0.660520] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.660523] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.660525] usb usb4: >Product: UHCI Host Controller
[ 0.660527] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.660529] usb usb4: >SerialNumber: 0000:00:1a.1
[ 0.660616] hub 4-0:1.0: >USB hub found
[ 0.660620] hub 4-0:1.0: >2 ports detected
[ 0.660685] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 0.660688] uhci_hcd 0000:00:1d.0: >UHCI Host Controller
[ 0.660695] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 5
[ 0.660715] uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000d480
[ 0.660744] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.660746] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.660749] usb usb5: >Product: UHCI Host Controller
[ 0.660751] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.660753] usb usb5: >SerialNumber: 0000:00:1d.0
[ 0.660834] hub 5-0:1.0: >USB hub found
[ 0.660838] hub 5-0:1.0: >2 ports detected
[ 0.660903] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[ 0.660906] uhci_hcd 0000:00:1d.1: >UHCI Host Controller
[ 0.660911] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 6
[ 0.660932] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000d800
[ 0.660959] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.660962] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.660964] usb usb6: >Product: UHCI Host Controller
[ 0.660966] usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.660968] usb usb6: >SerialNumber: 0000:00:1d.1
[ 0.661049] hub 6-0:1.0: >USB hub found
[ 0.661052] hub 6-0:1.0: >2 ports detected
[ 0.661119] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[ 0.661122] uhci_hcd 0000:00:1d.2: >UHCI Host Controller
[ 0.661127] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 7
[ 0.661147] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000d880
[ 0.661174] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.661177] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.661179] usb usb7: >Product: UHCI Host Controller
[ 0.661181] usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.661183] usb usb7: >SerialNumber: 0000:00:1d.2
[ 0.661265] hub 7-0:1.0: >USB hub found
[ 0.661269] hub 7-0:1.0: >2 ports detected
[ 0.661380] usbcore: registered new interface driver libusual
[ 0.661429] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.661431] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.661939] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.662023] mousedev: PS/2 mouse device common for all mice
[ 0.662135] rtc_cmos 00:03: >RTC can wake from S4
[ 0.662242] rtc_cmos 00:03: >rtc core: registered rtc_cmos as rtc0
[ 0.662264] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.662322] device-mapper: uevent: version 1.0.3
[ 0.662375] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.662404] EISA: Probing bus 0 at eisa.0
[ 0.662409] Cannot allocate resource for EISA slot 1
[ 0.662430] EISA: Detected 0 cards.
[ 0.662439] cpuidle: using governor ladder
[ 0.662440] cpuidle: using governor menu
[ 0.662442] EFI Variables Facility v0.08 2004-May-17
[ 0.662588] ashmem: initialized
[ 0.662712] TCP: cubic registered
[ 0.662812] NET: Registered protocol family 10
[ 0.662998] NET: Registered protocol family 17
[ 0.663008] Key type dns_resolver registered
[ 0.663075] Using IPI No-Shortcut mode
[ 0.663155] PM: Hibernation image not present or could not be loaded.
[ 0.663169] registered taskstats version 1
[ 0.665393] Key type trusted registered
[ 0.667175] Key type encrypted registered
[ 0.669305] Magic number: 13:768:931
[ 0.669398] rtc_cmos 00:03: >setting system clock to 2013-05-11 10:54:04 UTC (1368269644)
[ 0.669721] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.669722] EDD information not available.
[ 0.680978] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.764756] isapnp: No Plug & Play device found
[ 0.792048] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.792087] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.962603] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.116064] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.124909] ata6.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 1.124914] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.140909] ata6.00: configured for UDMA/133
[ 1.156043] usb 5-2: >new low-speed USB device number 2 using uhci_hcd
[ 1.282629] ata3.00: SATA link down (SStatus 0 SControl 300)
[ 1.282641] ata3.01: SATA link down (SStatus 4 SControl 300)
[ 1.323777] usb 5-2: >New USB device found, idVendor=04f3, idProduct=0210
[ 1.323782] usb 5-2: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.323787] usb 5-2: >Product: PS/2+USB Mouse
[ 1.384058] Refined TSC clocksource calibration: 2407.304 MHz.
[ 1.384064] Switching to clocksource tsc
[ 1.436075] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.436091] ata4.01: SATA link down (SStatus 4 SControl 300)
[ 1.436104] ata4.01: link offline, clearing class 3 to NONE
[ 1.444133] ata4.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
[ 1.460134] ata4.00: configured for UDMA/100
[ 1.462843] scsi 3:0:0:0: >CD-ROM Optiarc DVD RW AD-7200S 1.06 PQ: 0 ANSI: 5
[ 1.465120] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.465124] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.465277] sr 3:0:0:0: >Attached scsi CD-ROM sr0
[ 1.465377] sr 3:0:0:0: >Attached scsi generic sg0 type 5
[ 1.465497] scsi 5:0:0:0: >Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 1.465594] sd 5:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.465616] sd 5:0:0:0: >Attached scsi generic sg1 type 0
[ 1.465638] sd 5:0:0:0: >[sda] Write Protect is off
[ 1.465641] sd 5:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 1.465662] sd 5:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.516231] sda: sda3 < sda5 sda6 sda7 sda8 sda9 > sda4
[ 1.516669] sd 5:0:0:0: >[sda] Attached SCSI disk
[ 1.516734] Freeing unused kernel memory: 756k freed
[ 1.517027] Write protecting the kernel text: 5960k
[ 1.517044] Write protecting the kernel read-only data: 2424k
[ 1.517045] NX-protecting the kernel data: 4280k
[ 1.532459] udevd[103]: starting version 175
[ 1.591804] pata_jmicron 0000:02:00.1: >setting latency timer to 64
[ 1.594178] scsi6 : pata_jmicron
[ 1.595173] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.595289] r8169 0000:03:00.0: >irq 44 for MSI/MSI-X
[ 1.595467] r8169 0000:03:00.0: >eth0: RTL8168b/8111b at 0xf8428000, 00:1d:60:2a:70:31, XID 18000000 IRQ 44
[ 1.595470] r8169 0000:03:00.0: >eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.597436] scsi7 : pata_jmicron
[ 1.597995] ata7: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17
[ 1.597999] ata8: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17
[ 1.623278] Floppy drive(s): fd0 is 1.44M
[ 1.639683] FDC 0 is a post-1991 82077
[ 1.760529] ata7.00: ATAPI: SONY DVD-ROM DDU1615, GYS1, max UDMA/66
[ 1.768522] ata7.00: configured for UDMA/66
[ 1.769944] scsi 6:0:0:0: >CD-ROM SONY DVD-ROM DDU1615 GYS1 PQ: 0 ANSI: 5
[ 1.771090] sr1: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
[ 1.771250] sr 6:0:0:0: >Attached scsi CD-ROM sr1
[ 1.771389] sr 6:0:0:0: >Attached scsi generic sg2 type 5
[ 1.948905] usbcore: registered new interface driver usbhid
[ 1.948911] usbhid: USB HID core driver
[ 1.951424] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input3
[ 1.951535] hid-generic 0003:04F3:0210.0001: >input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-2/input0
[ 7.448345] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 16.932263] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.949209] udevd[456]: starting version 175
[ 16.982454] lp: driver loaded but no devices found
[ 17.010912] wmi: Mapper loaded
[ 17.032547] ACPI Warning: 0x00000830-0x00000833 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMIE 1 (20120320/utaddress-251)
[ 17.032555] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.032558] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 17.033005] [drm] Initialized drm 1.1.0 20060810
[ 17.049289] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2)
[ 17.052550] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 17.092545] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 17.092549] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 17.092552] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 17.092555] [drm] nouveau 0000:01:00.0: Bios version 60.84.35.00
[ 17.092559] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 17.093275] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 17.093278] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 17.093281] [drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000028
[ 17.093283] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00020030
[ 17.093285] [drm] nouveau 0000:01:00.0: DCB outp 02: 04011310 00000028
[ 17.093287] [drm] nouveau 0000:01:00.0: DCB outp 03: 02011312 00020030
[ 17.093289] [drm] nouveau 0000:01:00.0: DCB outp 04: 010223f1 00c0c083
[ 17.093290] [drm] nouveau 0000:01:00.0: DCB conn 00: 1030
[ 17.093293] [drm] nouveau 0000:01:00.0: DCB conn 01: 2130
[ 17.093295] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210
[ 17.093297] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211
[ 17.093299] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213
[ 17.093301] [drm] nouveau 0000:01:00.0: DCB conn 05: 0362
[ 17.093306] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBDC4
[ 17.102045] parport_pc 00:0b: >reported by Plug and Play ACPI
[ 17.102149] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 17.116809] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC0E7
[ 17.133514] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCB33
[ 17.133522] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCC25
[ 17.134583] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xCE3E
[ 17.134584] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xCEA3
[ 17.154433] [drm] nouveau 0000:01:00.0: 0xCEA3: Condition still not met after 20ms, skipping following opcodes
[ 17.216556] lp0: using parport0 (interrupt-driven).
[ 17.221100] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
[ 17.234586] [TTM] Zone kernel: Available graphics memory: 435958 kiB
[ 17.234591] [TTM] Zone highmem: Available graphics memory: 1519130 kiB
[ 17.234593] [TTM] Initializing pool allocator
[ 17.234598] [TTM] Initializing DMA pool allocator
[ 17.234614] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (GDDR3)
[ 17.235452] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 17.300462] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 17.300466] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 17.300840] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1
[ 17.301292] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.301294] [drm] No driver support for vblank timestamp query.
[ 17.332744] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 17.332751] [drm] nouveau 0000:01:00.0: 0: core 540MHz shader 1188MHz memory 800MHz fanspeed 100%
[ 17.332754] [drm] nouveau 0000:01:00.0: c: core 540MHz shader 1188MHz memory 702MHz voltage 1320mV fanspeed 100%
[ 17.345236] [drm] nouveau 0000:01:00.0: MM: using CRYPT for buffer copies
[ 17.430290] ppdev: user-space parallel port driver
[ 17.436124] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 17.455977] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x2c0000, bo f1796e00
[ 17.456101] fbcon: nouveaufb (fb0) is primary device
[ 17.475206] Console: switching to colour frame buffer device 160x64
[ 17.476355] fb0: nouveaufb frame buffer device
[ 17.476357] drm: registered panic notifier
[ 17.476362] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 17.524962] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1
[ 17.528382] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 17.531011] coretemp coretemp.0: >Using relative temperature scale!
[ 17.531033] coretemp coretemp.0: >Using relative temperature scale!
[ 18.381094] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[ 18.494627] init: Failed to spawn smbd main process: unable to execute: No such file or directory
[ 18.591608] init: failsafe main process (807) killed by TERM signal
[ 18.621071] Bluetooth: Core ver 2.16
[ 18.623028] NET: Registered protocol family 31
[ 18.623032] Bluetooth: HCI device and connection manager initialized
[ 18.623316] Bluetooth: HCI socket layer initialized
[ 18.623319] Bluetooth: L2CAP socket layer initialized
[ 18.623324] Bluetooth: SCO socket layer initialized
[ 18.634991] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.634995] Bluetooth: BNEP filters: protocol multicast
[ 18.650473] Bluetooth: RFCOMM TTY layer initialized
[ 18.650480] Bluetooth: RFCOMM socket layer initialized
[ 18.650482] Bluetooth: RFCOMM ver 1.11
[ 18.746201] r8169 0000:03:00.0: >eth0: link down
[ 18.746358] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.746654] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.746883] r8169 0000:03:00.0: >eth0: link down
[ 20.189852] init: tftpd-hpa main process (1141) terminated with status 66
[ 20.189879] init: tftpd-hpa main process ended, respawning
[ 20.401135] init: isc-dhcp-server main process (1177) terminated with status 1
[ 20.401162] init: isc-dhcp-server main process ended, respawning
[ 20.468028] init: isc-dhcp-server main process (1315) terminated with status 1
[ 20.468061] init: isc-dhcp-server main process ended, respawning
[ 20.518774] init: isc-dhcp-server main process (1341) terminated with status 1
[ 20.518800] init: isc-dhcp-server main process ended, respawning
[ 20.577449] init: isc-dhcp-server main process (1352) terminated with status 1
[ 20.577473] init: isc-dhcp-server main process ended, respawning
[ 20.628448] init: isc-dhcp-server main process (1377) terminated with status 1
[ 20.628497] init: isc-dhcp-server main process ended, respawning
[ 20.686574] init: isc-dhcp-server main process (1395) terminated with status 1
[ 20.686603] init: isc-dhcp-server main process ended, respawning
[ 20.762373] init: isc-dhcp-server main process (1406) terminated with status 1
[ 20.762421] init: isc-dhcp-server main process ended, respawning
[ 20.820982] init: isc-dhcp-server main process (1413) terminated with status 1
[ 20.821017] init: isc-dhcp-server main process ended, respawning
[ 20.879522] init: isc-dhcp-server main process (1420) terminated with status 1
[ 20.879563] init: isc-dhcp-server main process ended, respawning
[ 20.926366] r8169 0000:03:00.0: >eth0: link up
[ 20.926570] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.964428] init: isc-dhcp-server main process (1445) terminated with status 1
[ 20.964459] init: isc-dhcp-server main process ended, respawning
[ 21.031395] init: isc-dhcp-server main process (1453) terminated with status 1
[ 21.031426] init: isc-dhcp-server respawning too fast, stopped
[ 22.390125] Netfilter messages via NETLINK v0.30.
[ 22.984643] init: winbind main process (1678) terminated with status 127
[ 22.984691] init: winbind main process ended, respawning
[ 23.012274] init: winbind main process (1680) terminated with status 127
[ 23.012300] init: winbind main process ended, respawning
[ 23.015574] init: winbind main process (1682) terminated with status 127
[ 23.015600] init: winbind main process ended, respawning
[ 23.019881] init: winbind main process (1684) terminated with status 127
[ 23.019908] init: winbind main process ended, respawning
[ 23.023677] init: winbind main process (1686) terminated with status 127
[ 23.023703] init: winbind main process ended, respawning
[ 23.028466] init: winbind main process (1688) terminated with status 127
[ 23.028490] init: winbind main process ended, respawning
[ 23.032688] init: winbind main process (1690) terminated with status 127
[ 23.032713] init: winbind main process ended, respawning
[ 23.036975] init: winbind main process (1692) terminated with status 127
[ 23.037023] init: winbind main process ended, respawning
[ 23.041835] init: winbind main process (1694) terminated with status 127
[ 23.041864] init: winbind main process ended, respawning
[ 23.047235] init: winbind main process (1696) terminated with status 127
[ 23.047264] init: winbind main process ended, respawning
[ 23.052240] init: winbind main process (1698) terminated with status 127
[ 23.052269] init: winbind respawning too fast, stopped
[ 24.304623] init: plymouth-stop pre-start process (1920) terminated with status 1
[ 100.168053] end_request: I/O error, dev fd0, sector 0
[ 100.192060] end_request: I/O error, dev fd0, sector 0
[ 101.712035] end_request: I/O error, dev fd0, sector 0
[ 101.736108] end_request: I/O error, dev fd0, sector 0
[ 115.888047] usb 1-1: >new high-speed USB device number 2 using ehci_hcd
[ 116.141384] usb 1-1: >New USB device found, idVendor=0bc2, idProduct=5031
[ 116.141392] usb 1-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 116.141397] usb 1-1: >Product: FreeAgent GoFlex
[ 116.141402] usb 1-1: >Manufacturer: Seagate
[ 116.141406] usb 1-1: >SerialNumber: NA0CQRG6
[ 116.202315] Initializing USB Mass Storage driver...
[ 116.202691] scsi8 : usb-storage 1-1:1.0
[ 116.202802] usbcore: registered new interface driver usb-storage
[ 116.202804] USB Mass Storage support registered.
[ 116.208514] usbcore: registered new interface driver uas
[ 117.201827] scsi 8:0:0:0: >Direct-Access Seagate FreeAgent GoFlex 214 PQ: 0 ANSI: 0
[ 117.203092] sd 8:0:0:0: >Attached scsi generic sg3 type 0
[ 117.205348] sd 8:0:0:0: >[sdb] 1953523054 512-byte logical blocks: (1.00 TB/931 GiB)
[ 117.206185] sd 8:0:0:0: >[sdb] Write Protect is off
[ 117.206193] sd 8:0:0:0: >[sdb] Mode Sense: 0f 00 00 00
[ 117.206927] sd 8:0:0:0: >[sdb] No Caching mode page present
[ 117.206933] sd 8:0:0:0: >[sdb] Assuming drive cache: write through
[ 117.210337] sd 8:0:0:0: >[sdb] No Caching mode page present
[ 117.210345] sd 8:0:0:0: >[sdb] Assuming drive cache: write through
[ 117.256950] sdb: unknown partition table
[ 117.262546] sd 8:0:0:0: >[sdb] No Caching mode page present
[ 117.262551] sd 8:0:0:0: >[sdb] Assuming drive cache: write through
[ 117.262554] sd 8:0:0:0: >[sdb] Attached SCSI disk1. dmesg | grep ttyS /смотрим используемые порты и прерывания/
2. setserial -G /dev/ttyS[01] /показывает и настраивает последовательные порты,
Пока все, покажите, что есть..
А то в этом - сложновато:
text
0.412048] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.432387] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.453632] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A И гляньте: $ cat /proc/interrupts - там по прерываниям увидите, что сидит на серийном порте, т.е. видит его комп или нет
ЗЫ: вместо dmesg могли бы просто скопировать syslog , вернее его часть относящуюся к портам :-X
1. dmesg | grep ttyS /смотрим используемые порты и прерывания/
2. setserial -G /dev/ttyS[01] /показывает и настраивает последовательные порты,
Пока все, покажите, что есть..
А то в этом - сложновато:0.412048] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.432387] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.453632] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AИ гляньте: $ cat /proc/interrupts - там по прерываниям увидите, что сидит на серийном порте, т.е. видит его комп или нет
ЗЫ: вместо dmesg могли бы просто скопировать syslog , вернее его часть относящуюся к портам :-X
text
$ dmesg | grep ttyS
[ 0.410125] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.431389] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AИ гляньте: $ cat /proc/interrupts
text
CPU0 CPU1
0: 43 0 IO-APIC-edge timer
1: 1811 0 IO-APIC-edge i8042
6: 8 0 IO-APIC-edge floppy
7: 1 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
16: 4502 0 IO-APIC-fasteoi ahci, uhci_hcd:usb3, nouveau
17: 29418 0 IO-APIC-fasteoi uhci_hcd:usb4, pata_jmicron
18: 103203 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7
19: 111905 0 IO-APIC-fasteoi ata_piix, ata_piix, uhci_hcd:usb6
23: 103449 0 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
44: 2119226 0 PCI-MSI-edge eth0
45: 1317014 0 PCI-MSI-edge snd_hda_intel
NMI: 5791 5334 Non-maskable interrupts
LOC: 8030975 8697422 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 5791 5334 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 1349892 645612 Rescheduling interrupts
CAL: 217 258 Function call interrupts
TLB: 781124 751249 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 101 101 Machine check polls
ERR: 0
MIS: 0text
setserial -G /dev/ttyS[01]
Программа 'setserial' на данный момент не установлена. Вы можете установить её, выполнив:
sudo apt-get install setserial
Чтение списков пакетов… Готово
Построение дерева зависимостей
Чтение информации о состоянии… Готово
E: Не удалось найти пакет setserialПосмотрите файл /etc/modules Есть в нем загруженый serial port? Если у Вас подключен принтер - увидите в файле lp, если подключен модем, то увидите последовательный порт ttyS0.
А если попробовать настроить модем бриджем, PPPoE поднять на компе, будут ли разрывы.
Очень дельный совет *THUMBSUP*
setserial -G /dev/ttyS[01] Программа 'setserial' на данный момент не установлена. Вы можете установить её, выполнив: sudo apt-get install setserial Чтение списков пакетов… Готово Построение дерева зависимостей Чтение информации о состоянии… Готово E: Не удалось найти пакет setserial
Последовательный порт у Вас виден, надо смотреть что с настройками порта и роутера. Setserial можно установить из Центра приложений (нормально ставится). Если с лайв СиДи не падает, то что-то не так встало при установке ОС. ИМХО
[quote="Userboy⇓"]setserial -G /dev/ttyS[01] Программа 'setserial' на данный момент не установлена. Вы можете установить её, выполнив: sudo apt-get install setserial Чтение списков пакетов… Готово Построение дерева зависимостей Чтение информации о состоянии… Готово E: Не удалось найти пакет setserial
Последовательный порт у Вас виден, надо смотреть что с настройками порта и роутера. Setserial можно установить из Центра приложений (нормально ставится). Если с лайв СиДи не падает, то что-то не так встало при установке ОС. ИМХО[/quote]
В том то и дело. Что до этого три месяца работало на ура! И тут после очередного обновления, подозреваю что после обновления iptables или dchp что то поменялось, далеко не в лучшую сторону.
У меня почему то отсутствует Setserial и в центре приложений и в Synaptic.
Установил setserial с пакета deb.
Показывает следующее:
Invalid flag: /dev/ttyS1
Userboy, Попробуйте сделать апгрэйд дистра, но, я бы, за это время, забэкапил бы все данные и установил бы ось с диска по-новой (без подключенного интернета) это с разбивкой - минут 10-15, а потом, подключив интернет, в центре приложений (там будет куча обновлений) - не устанавливал бы то, что мне не надо. Модем установленая ось должна найти автоматом. Короче - делов на час - полтора. ИМХО.
Invalid flag: /dev/ttyS1
просто у Вас задействован СОМ1(ttyS0) с IRQ =4
просто у Вас задействован СОМ1(ttyS0) с IRQ =4
Это ещё что такое? И как с этим боротся?
просто у Вас задействован СОМ1(ttyS0) с IRQ =4
Это ещё что такое? И как с этим боротся?
Модем подключается к одному из последовательных портов СОМ1(ttyS0) c IRQ(прерывание) =4, СОМ2(ttyS1) c IRQ=3 - это стандартно, но можно назначить и др. прерывания, как раз утилитой setserial(но ее, как и др. инструменты в линукс, надо изучить). setserial не обращается к самому устройству. Все, что она выводит - это параметры, используемые драйвером последовательного порта, если только вы не используете параметры autoconfig и auto_irq parameters. В этом случае setserial попросит ядро опросить устройство. Для настройки соединений существуют инструменты: kppp (с графическим интерфейсом), wvdial(управление из командной строки) - но их так же придется поизучать.
Войдите или зарегистрируйтесь, чтобы ответить.
