LinuxForum.Fans
Тема

не ставится убунту

Автор: sullen 20 сообщений 3391 просмотров
26.02.2013 18:19 #305244

То ли я дурак, то ли лыжи не едут. Установил убунту на ноутбук, решил поставить её же на стационарник. Всё бы хорошо, но во время установки (в том месте где начинается презентация а-ля изменения в обновлённой убунту, бла бла бла) инсталятор вылетает с неизвестной ошибкой и загружает оболочку с CD. Как выяснилось, инсталятор вылетает как раз в тот момент, когда переключается первый слайд. Пробовал на разных версиях убунту, всё повторяется один в один. В чём может быть проблема?

26.02.2013 18:22 #305245
"sullen" написал:
То ли я дурак, то ли лыжи не едут. Установил убунту на ноутбук, решил поставить её же на стационарник. Всё бы хорошо, но во время установки (в том месте где начинается презентация а-ля изменения в обновлённой убунту, бла бла бла) инсталятор вылетает с неизвестной ошибкой и загружает оболочку с CD. Как выяснилось, инсталятор вылетает как раз в тот момент, когда переключается первый слайд. Пробовал на разных версиях убунту, всё повторяется один в один. В чём может быть проблема?

А в live пробовал загружаться? (с диска, без установки)

26.02.2013 18:28 #305246

Попробуйте сначала загрузиться полностью в Live, а уже из установленной системы её ставить.

26.02.2013 18:28 #305247

Информация о железе очень не помешала бы.

26.02.2013 21:15 · отредактировано #305283

в live всё работает без проблем, но тем не менее во время установки возникает та же ошибка в том же месте. железо старо как мир, мать gigabyte kt333, более ничего о нём сказать не могу

p.s. какие буковки нашёл на железках: видео - KOB SP6800AE-32 GF2 MX400 32mb SDR, оператива: 1gb ddr400

26.02.2013 21:19 #305284
"sullen" написал:
в live всё работает без проблем,
"sullen" написал:
более ничего о нём сказать не могу

Загрузитесь с «живого» диска и покажите

text

dmesg
text

lspci -k
text

cat /var/log/Xorg.0.log
26.02.2013 21:35 #305285
Lupo Alberto написал:

Загрузитесь с «живого» диска и покажите
text

dmesg
text

lspci -k
text

cat /var/log/Xorg.0.log

простите за тупой вопрос, "покажите" значит выполнить эти команды в terminal emulator и скопировать полученное сюда?

26.02.2013 21:38 #305286

Да, именно.

26.02.2013 21:40 #305287
"sullen" написал:
"покажите" значит выполнить эти команды в terminal emulator и скопировать полученное сюда?

Да. Точнее, поместите полученные данные на какой-либо «pastebin»-сервис, а сюда только ссылки.
P.S. В порядке «оффтопа»: если использовать мой любимый «живой» диск, то нужные ссылки можно получить примерно так:
[console]
gentoo-laptop ~ # wgetpaste -c 'lspci -k'
Your paste can be seen here: http://bpaste.net/show/79999/
gentoo-laptop ~ # wgetpaste -c 'dmesg'
Your paste can be seen here: http://bpaste.net/show/80000/
gentoo-laptop ~ # wgetpaste /var/log/Xorg.0.log
Your paste can be seen here: http://bpaste.net/show/80001/
[/console]

26.02.2013 21:45 #305288
text
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003fff8000-0x000000003fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI:          7VKML                           /7VKML, BIOS 07.00T   02/24/2003
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 base 0E0000000 mask FFC000000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fb9b0-0x000fb9bf] mapped at [c00fb9b0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x3ef46000-0x3ffeffff]
[    0.000000] Allocated new RAMDISK: [mem 0x36b54000-0x37bfd9ba]
[    0.000000] Move RAMDISK from [mem 0x3ef46000-0x3ffef9ba] to [mem 0x36b54000-0x37bfd9ba]
[    0.000000] ACPI: RSDP 000fa610 00014 (v00 AMI   )
[    0.000000] ACPI: RSDT 3fff0000 0002C (v01 AMIINT AMIINI09 00000010 MSFT 0100000D)
[    0.000000] ACPI: FACP 3fff0030 00081 (v01 AMIINT AMIINI09 00000011 MSFT 0100000D)
[    0.000000] ACPI: DSDT 3fff0120 031F1 (v01    VIA   VIA_K7 00001000 MSFT 0100000D)
[    0.000000] ACPI: FACS 3fff8000 00040
[    0.000000] ACPI: APIC 3fff00c0 00054 (v01 AMIINT AMIINI09 00000011 MSFT 0100000D)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 131MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3ffeffff]
[    0.000000] On node 0 totalpages: 262015
[    0.000000] free_area_init_node: node 0, pgdat c18a0840, node_mem_map f6353200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 264 pages used for memmap
[    0.000000]   HighMem zone: 33514 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f633e000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2096896 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003fff0)
[    0.000000] Memory: 1009260k/1048512k available (5956k kernel code, 38800k reserved, 2928k data, 756k init, 135112k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18ae000 - 0xc196b000   ( 756 kB)
[    0.000000]       .data : 0xc15d1358 - 0xc18ad6c0   (2928 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15d1358   (5956 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1107.835 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2215.67 BogoMIPS (lpj=4431340)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004098] Security Framework initialized
[    0.008074] AppArmor: AppArmor initialized
[    0.008078] Yama: becoming mindful.
[    0.008232] Mount-cache hash table entries: 512
[    0.008829] Initializing cgroup subsys cpuacct
[    0.008842] Initializing cgroup subsys memory
[    0.008871] Initializing cgroup subsys devices
[    0.008877] Initializing cgroup subsys freezer
[    0.008881] Initializing cgroup subsys blkio
[    0.008886] Initializing cgroup subsys perf_event
[    0.008972] mce: CPU supports 4 MCE banks
[    0.009126] SMP alternatives: switching to UP code
[    0.026001] Freeing SMP alternatives: 24k freed
[    0.026076] ACPI: Core revision 20120320
[    0.031717] ftrace: allocating 24585 entries in 49 pages
[    0.048237] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.090867] CPU0: AMD Duron(tm) Processor stepping 01
[    0.092004] Performance Events: AMD PMU driver.
[    0.092004] ... version:                0
[    0.092004] ... bit width:              48
[    0.092004] ... generic registers:      4
[    0.092004] ... value mask:             0000ffffffffffff
[    0.092004] ... max period:             00007fffffffffff
[    0.092004] ... fixed-purpose events:   0
[    0.092004] ... event mask:             000000000000000f
[    0.092004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.092004] Brought up 1 CPUs
[    0.092004] Total of 1 processors activated (2215.67 BogoMIPS).
[    0.092004] devtmpfs: initialized
[    0.092004] EVM: security.selinux
[    0.092004] EVM: security.SMACK64
[    0.092004] EVM: security.capability
[    0.092004] PM: Registering ACPI NVS region [mem 0x3fff8000-0x3fffffff] (32768 bytes)
[    0.093258] dummy: 
[    0.093325] RTC time:  0:00:28, date: 02/24/03
[    0.093474] NET: Registered protocol family 16
[    0.093912] EISA bus registered
[    0.094105] ACPI: bus type pci registered
[    0.097380] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
[    0.097384] PCI: Using configuration type 1 for base access
[    0.100508] bio: create slab <bio-0> at 0
[    0.100842] ACPI: Added _OSI(Module Device)
[    0.100849] ACPI: Added _OSI(Processor Device)
[    0.100853] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100858] ACPI: Added _OSI(Processor Aggregator Device)
[    0.101995] ACPI: EC: Look up EC in DSDT
[    0.108416] ACPI: Interpreter enabled
[    0.108442] ACPI: (supports S0 S1 S4 S5)
[    0.108488] ACPI: Using IOAPIC for interrupt routing
[    0.109833] ACPI: Power Resource [URP1] (off)
[    0.111748] ACPI: Power Resource [URP2] (off)
[    0.111838] ACPI: Power Resource [FDDP] (off)
[    0.111923] ACPI: Power Resource [LPTP] (off)
[    0.116629] ACPI: No dock devices found.
[    0.116656] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.116881] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.117061] pci_root PNP0A03:00: >host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.117068] pci_root PNP0A03:00: >host bridge window [io  0x0d00-0xffff] (ignored)
[    0.117075] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.117081] pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.117087] pci_root PNP0A03:00: >host bridge window [mem 0x40000000-0xffdfffff] (ignored)
[    0.117093] pci_root PNP0A03:00: >host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
[    0.117097] PCI: root bus 00: using default resources
[    0.117224] PCI host bridge to bus 0000:00
[    0.117233] pci_bus 0000:00: >root bus resource [io  0x0000-0xffff]
[    0.117239] pci_bus 0000:00: >root bus resource [mem 0x00000000-0x3ffffffff]
[    0.117273] pci 0000:00:00.0: >[1106:3116] type 00 class 0x060000
[    0.117295] pci 0000:00:00.0: >reg 10: [mem 0xe0000000-0xe3ffffff pref]
[    0.117397] pci 0000:00:01.0: >[1106:b091] type 01 class 0x060400
[    0.117457] pci 0000:00:01.0: >supports D1
[    0.117495] pci 0000:00:0a.0: >[11c1:044c] type 00 class 0x078000
[    0.117517] pci 0000:00:0a.0: >reg 10: [mem 0xdffeff00-0xdffeffff]
[    0.117531] pci 0000:00:0a.0: >reg 14: [io  0xd400-0xd407]
[    0.117545] pci 0000:00:0a.0: >reg 18: [io  0xd000-0xd0ff]
[    0.117610] pci 0000:00:0a.0: >supports D2
[    0.117616] pci 0000:00:0a.0: >PME# supported from D2 D3hot D3cold
[    0.117647] pci 0000:00:0b.0: >[1106:3249] type 00 class 0x010400
[    0.117669] pci 0000:00:0b.0: >reg 10: [io  0xec00-0xec0f]
[    0.117683] pci 0000:00:0b.0: >reg 14: [io  0xe800-0xe80f]
[    0.117697] pci 0000:00:0b.0: >reg 18: [io  0xe400-0xe40f]
[    0.117711] pci 0000:00:0b.0: >reg 1c: [io  0xe000-0xe00f]
[    0.117724] pci 0000:00:0b.0: >reg 20: [io  0xdc00-0xdc1f]
[    0.117738] pci 0000:00:0b.0: >reg 24: [io  0xd800-0xd8ff]
[    0.117753] pci 0000:00:0b.0: >reg 30: [mem 0xdfff0000-0xdfffffff pref]
[    0.117815] pci 0000:00:10.0: >[1106:3038] type 00 class 0x0c0300
[    0.117868] pci 0000:00:10.0: >reg 20: [io  0xcc00-0xcc1f]
[    0.117916] pci 0000:00:10.0: >supports D1 D2
[    0.117921] pci 0000:00:10.0: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.117957] pci 0000:00:10.1: >[1106:3038] type 00 class 0x0c0300
[    0.118009] pci 0000:00:10.1: >reg 20: [io  0xc800-0xc81f]
[    0.118057] pci 0000:00:10.1: >supports D1 D2
[    0.118063] pci 0000:00:10.1: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.118101] pci 0000:00:11.0: >[1106:3177] type 00 class 0x060100
[    0.118171] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.118187] pci 0000:00:11.0: >quirk: [io  0x0800-0x087f] claimed by vt8235 PM
[    0.118194] pci 0000:00:11.0: >quirk: [io  0x0400-0x040f] claimed by vt8235 SMB
[    0.118248] pci 0000:00:11.1: >[1106:0571] type 00 class 0x01018a
[    0.118303] pci 0000:00:11.1: >reg 20: [io  0xfc00-0xfc0f]
[    0.118383] pci 0000:00:11.5: >[1106:3059] type 00 class 0x040100
[    0.118405] pci 0000:00:11.5: >reg 10: [io  0xc400-0xc4ff]
[    0.118489] pci 0000:00:11.5: >supports D1 D2
[    0.118520] pci 0000:00:13.0: >[10ec:8139] type 00 class 0x020000
[    0.118542] pci 0000:00:13.0: >reg 10: [io  0xc000-0xc0ff]
[    0.118556] pci 0000:00:13.0: >reg 14: [mem 0xdffefe00-0xdffefeff]
[    0.118629] pci 0000:00:13.0: >supports D1 D2
[    0.118634] pci 0000:00:13.0: >PME# supported from D1 D2 D3hot D3cold
[    0.118711] pci 0000:01:00.0: >[10de:0110] type 00 class 0x030000
[    0.118732] pci 0000:01:00.0: >reg 10: [mem 0xde000000-0xdeffffff]
[    0.118745] pci 0000:01:00.0: >reg 14: [mem 0xd0000000-0xd7ffffff pref]
[    0.118783] pci 0000:01:00.0: >reg 30: [mem 0xdfef0000-0xdfefffff pref]
[    0.118857] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.118868] pci 0000:00:01.0: >  bridge window [mem 0xdde00000-0xdfefffff]
[    0.118877] pci 0000:00:01.0: >  bridge window [mem 0xcdc00000-0xddcfffff pref]
[    0.118890] pci_bus 0000:00: >on NUMA node 0
[    0.118905] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.119265]  pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.134565] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.134690] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.134799] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.134906] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.135263] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.135272] vgaarb: loaded
[    0.135275] vgaarb: bridge control possible 0000:01:00.0
[    0.135923] SCSI subsystem initialized
[    0.136147] libata version 3.00 loaded.
[    0.136232] ACPI: bus type usb registered
[    0.136313] usbcore: registered new interface driver usbfs
[    0.136339] usbcore: registered new interface driver hub
[    0.136430] usbcore: registered new device driver usb
[    0.136737] PCI: Using ACPI for IRQ routing
[    0.136752] PCI: pci_cache_line_size set to 32 bytes
[    0.136846] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.136852] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
[    0.137164] NetLabel: Initializing
[    0.137171] NetLabel:  domain hash size = 128
[    0.137174] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.137206] NetLabel:  unlabeled traffic allowed by default
[    0.159712] AppArmor: AppArmor Filesystem Enabled
[    0.159822] pnp: PnP ACPI init
[    0.159868] ACPI: bus type pnp registered
[    0.160189] pnp 00:00: >[bus 00-ff]
[    0.160199] pnp 00:00: >[io  0x0cf8-0x0cff]
[    0.160206] pnp 00:00: >[io  0x0000-0x0cf7 window]
[    0.160211] pnp 00:00: >[io  0x0d00-0xffff window]
[    0.160218] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[    0.160224] pnp 00:00: >[mem 0x000c0000-0x000dffff window]
[    0.160229] pnp 00:00: >[mem 0x40000000-0xffdfffff window]
[    0.160235] pnp 00:00: >[mem 0xfee01000-0xffdfffff window]
[    0.160387] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.160587] pnp 00:01: >[io  0x03f2-0x03f3]
[    0.160595] pnp 00:01: >[io  0x03f4-0x03f5]
[    0.160599] pnp 00:01: >[io  0x03f7]
[    0.160630] pnp 00:01: >[irq 6]
[    0.160636] pnp 00:01: >[dma 2]
[    0.160747] pnp 00:01: >Plug and Play ACPI device, IDs PNP0700 (active)
[    0.161155] pnp 00:02: >[io  0x03f8-0x03ff]
[    0.161172] pnp 00:02: >[irq 4]
[    0.161332] pnp 00:02: >Plug and Play ACPI device, IDs PNP0501 (active)
[    0.161741] pnp 00:03: >[io  0x02f8-0x02ff]
[    0.161757] pnp 00:03: >[irq 3]
[    0.161889] pnp 00:03: >Plug and Play ACPI device, IDs PNP0501 (active)
[    0.162586] pnp 00:04: >[io  0x0378-0x037f]
[    0.162593] pnp 00:04: >[io  0x0778-0x077b]
[    0.162608] pnp 00:04: >[irq 7]
[    0.162614] pnp 00:04: >[dma 3]
[    0.162822] pnp 00:04: >Plug and Play ACPI device, IDs PNP0401 (active)
[    0.163147] pnp 00:05: >[io  0x0201]
[    0.163221] pnp 00:05: >Plug and Play ACPI device, IDs PNPb02f (active)
[    0.163553] pnp 00:06: >[io  0x0300-0x0303]
[    0.163572] pnp 00:06: >[irq 5]
[    0.163698] pnp 00:06: >Plug and Play ACPI device, IDs PNPb006 (active)
[    0.163859] pnp 00:07: >[io  0x0010-0x001f]
[    0.163866] pnp 00:07: >[io  0x0022-0x003f]
[    0.163871] pnp 00:07: >[io  0x0020-0x0021]
[    0.163876] pnp 00:07: >[io  0x0044-0x005f]
[    0.163881] pnp 00:07: >[io  0x0062-0x0063]
[    0.163886] pnp 00:07: >[io  0x0065-0x006f]
[    0.163890] pnp 00:07: >[io  0x0072-0x007f]
[    0.163895] pnp 00:07: >[io  0x0080]
[    0.163900] pnp 00:07: >[io  0x0084-0x0086]
[    0.163904] pnp 00:07: >[io  0x0088]
[    0.163909] pnp 00:07: >[io  0x008c-0x008e]
[    0.163914] pnp 00:07: >[io  0x0090-0x009f]
[    0.163919] pnp 00:07: >[io  0x00a0-0x00a1]
[    0.163924] pnp 00:07: >[io  0x00a2-0x00bf]
[    0.163929] pnp 00:07: >[io  0x00e0-0x00ef]
[    0.163934] pnp 00:07: >[io  0x0290-0x0297]
[    0.163939] pnp 00:07: >[io  0x03f0-0x03f1]
[    0.163944] pnp 00:07: >[io  0x04d0-0x04d1]
[    0.163948] pnp 00:07: >[io  0x0400-0x040f]
[    0.163953] pnp 00:07: >[io  0x0800-0x087f]
[    0.163958] pnp 00:07: >[io  0x0600-0x060f]
[    0.163964] pnp 00:07: >[mem 0xfee00000-0xfee00fff]
[    0.164207] system 00:07: >[io  0x0290-0x0297] has been reserved
[    0.164216] system 00:07: >[io  0x03f0-0x03f1] has been reserved
[    0.164223] system 00:07: >[io  0x04d0-0x04d1] has been reserved
[    0.164229] system 00:07: >[io  0x0400-0x040f] has been reserved
[    0.164236] system 00:07: >[io  0x0800-0x087f] has been reserved
[    0.164242] system 00:07: >[io  0x0600-0x060f] has been reserved
[    0.164251] system 00:07: >[mem 0xfee00000-0xfee00fff] has been reserved
[    0.164261] system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.164364] pnp 00:08: >[dma 4]
[    0.164370] pnp 00:08: >[io  0x0000-0x000f]
[    0.164376] pnp 00:08: >[io  0x0081-0x0083]
[    0.164380] pnp 00:08: >[io  0x0087]
[    0.164385] pnp 00:08: >[io  0x0089-0x008b]
[    0.164390] pnp 00:08: >[io  0x008f]
[    0.164394] pnp 00:08: >[io  0x00c0-0x00df]
[    0.164460] pnp 00:08: >Plug and Play ACPI device, IDs PNP0200 (active)
[    0.164492] pnp 00:09: >[io  0x0070-0x0071]
[    0.164518] pnp 00:09: >[irq 8]
[    0.164575] pnp 00:09: >Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.164601] pnp 00:0a: >[io  0x0061]
[    0.164670] pnp 00:0a: >Plug and Play ACPI device, IDs PNP0800 (active)
[    0.164696] pnp 00:0b: >[io  0x00f0-0x00ff]
[    0.164708] pnp 00:0b: >[irq 13]
[    0.164766] pnp 00:0b: >Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.164864] pnp 00:0c: >[irq 12]
[    0.164952] pnp 00:0c: >Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.165008] pnp 00:0d: >[io  0x0060]
[    0.165015] pnp 00:0d: >[io  0x0064]
[    0.165026] pnp 00:0d: >[irq 1]
[    0.165099] pnp 00:0d: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.165461] pnp: PnP ACPI: found 14 devices
[    0.165466] ACPI: ACPI bus type pnp unregistered
[    0.165475] PnPBIOS: Disabled by ACPI PNP
[    0.204380] Switching to clocksource acpi_pm
[    0.204493] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.204510] pci 0000:00:01.0: >  bridge window [mem 0xdde00000-0xdfefffff]
[    0.204519] pci 0000:00:01.0: >  bridge window [mem 0xcdc00000-0xddcfffff pref]
[    0.204543] pci 0000:00:01.0: >setting latency timer to 64
[    0.204553] pci_bus 0000:00: >resource 4 [io  0x0000-0xffff]
[    0.204559] pci_bus 0000:00: >resource 5 [mem 0x00000000-0x3ffffffff]
[    0.204565] pci_bus 0000:01: >resource 1 [mem 0xdde00000-0xdfefffff]
[    0.204571] pci_bus 0000:01: >resource 2 [mem 0xcdc00000-0xddcfffff pref]
[    0.204711] NET: Registered protocol family 2
[    0.204861] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.205632] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.209214] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.211152] TCP: Hash tables configured (established 131072 bind 65536)
[    0.211159] TCP: reno registered
[    0.211170] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.211218] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.211457] NET: Registered protocol family 1
[    0.211518] pci 0000:00:01.0: >disabling DAC on VIA PCI bridge
[    0.211666] pci 0000:01:00.0: >Boot video device
[    0.211674] PCI: CLS 32 bytes, default 32
[    0.212899] audit: initializing netlink socket (disabled)
[    0.212943] type=2000 audit(1046044827.212:1): initialized
[    0.259948] Trying to unpack rootfs image as initramfs...
[    1.092879] highmem bounce pool size: 64 pages
[    1.092911] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.097574] VFS: Disk quotas dquot_6.5.2
[    1.097712] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.099306] fuse init (API version 7.19)
[    1.099549] msgmni has been set to 1707
[    1.100676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.100831] io scheduler noop registered
[    1.100838] io scheduler deadline registered (default)
[    1.100864] io scheduler cfq registered
[    1.101207] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.101272] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.101610] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.101627] ACPI: Power Button [PWRB]
[    1.101748] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.101755] ACPI: Sleep Button [SLPB]
[    1.101863] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.101870] ACPI: Power Button [PWRF]
[    1.107991] GHES: HEST is not enabled!
[    1.108511] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.128924] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.129006] isapnp: Scanning for PnP cards...
[    1.198480] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.221214] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.264780] Refined TSC clocksource calibration: 1107.519 MHz.
[    1.264794] Switching to clocksource tsc
[    1.285370] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.329624] Linux agpgart interface v0.103
[    1.329797] agpgart: Detected VIA PM266/KM266 chipset
[    1.335959] agpgart-via 0000:00:00.0: >AGP aperture is 64M @ 0xe0000000
[    1.339526] brd: module loaded
[    1.341607] loop: module loaded
[    1.342153] pata_acpi 0000:00:11.1: >can't derive routing for PCI INT A
[    1.342333] pata_acpi 0000:00:11.1: >can't derive routing for PCI INT A
[    1.343178] Fixed MDIO Bus: probed
[    1.343312] tun: Universal TUN/TAP device driver, 1.6
[    1.343316] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.343517] PPP generic driver version 2.4.2
[    1.343645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.343726] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.343769] uhci_hcd: USB Universal Host Controller Interface driver
[    1.343898] uhci_hcd 0000:00:10.0: >UHCI Host Controller
[    1.343924] uhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 1
[    1.344065] uhci_hcd 0000:00:10.0: >irq 21, io base 0x0000cc00
[    1.344191] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.344198] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.344204] usb usb1: >Product: UHCI Host Controller
[    1.344209] usb usb1: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    1.344214] usb usb1: >SerialNumber: 0000:00:10.0
[    1.344600] hub 1-0:1.0: >USB hub found
[    1.344619] hub 1-0:1.0: >2 ports detected
[    1.344816] uhci_hcd 0000:00:10.1: >UHCI Host Controller
[    1.344833] uhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 2
[    1.344881] uhci_hcd 0000:00:10.1: >irq 21, io base 0x0000c800
[    1.344985] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.344992] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.344998] usb usb2: >Product: UHCI Host Controller
[    1.345003] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    1.345007] usb usb2: >SerialNumber: 0000:00:10.1
[    1.345367] hub 2-0:1.0: >USB hub found
[    1.345386] hub 2-0:1.0: >2 ports detected
[    1.345675] usbcore: registered new interface driver libusual
[    1.345796] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.346289] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.346316] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.346670] mousedev: PS/2 mouse device common for all mice
[    1.347077] rtc_cmos 00:09: >RTC can wake from S4
[    1.347363] rtc_cmos 00:09: >rtc core: registered rtc_cmos as rtc0
[    1.347418] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    1.347587] device-mapper: uevent: version 1.0.3
[    1.347820] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.347958] EISA: Probing bus 0 at eisa.0
[    1.348085] EISA: Detected 0 cards.
[    1.348108] cpuidle: using governor ladder
[    1.348112] cpuidle: using governor menu
[    1.348116] EFI Variables Facility v0.08 2004-May-17
[    1.348799] ashmem: initialized
[    1.349124] TCP: cubic registered
[    1.349395] NET: Registered protocol family 10
[    1.349967] NET: Registered protocol family 17
[    1.350025] Key type dns_resolver registered
[    1.350197] Using IPI No-Shortcut mode
[    1.350535] PM: Hibernation image not present or could not be loaded.
[    1.350617] registered taskstats version 1
[    1.568618] isapnp: No Plug & Play device found
[    1.574367] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   10.165709] Freeing initrd memory: 17064k freed
[   10.224198] Key type trusted registered
[   10.231853] Key type encrypted registered
[   10.240378]   Magic number: 7:734:1
[   10.240393]   hash matches /build/buildd/linux-3.5.0/drivers/base/power/main.c:506
[   10.240659] rtc_cmos 00:09: >setting system clock to 2003-02-24 00:00:38 UTC (1046044838)
[   10.240904] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   10.240912] EDD information not available.
[   10.241281] Freeing unused kernel memory: 756k freed
[   10.243585] Write protecting the kernel text: 5960k
[   10.243621] Write protecting the kernel read-only data: 2424k
[   10.326843] udevd[86]: starting version 175
[   10.824236] Floppy drive(s): fd0 is 1.44M
[   10.844127] FDC 0 is a post-1991 82077
[   10.891183] wmi: Mapper loaded
[   10.921434] sata_via 0000:00:0b.0: >version 2.6
[   10.921659] sata_via 0000:00:0b.0: >routed to hard irq line 10
[   10.940148] scsi0 : sata_via
[   10.948131] scsi1 : sata_via
[   10.952151] scsi2 : sata_via
[   10.952375] ata1: SATA max UDMA/133 port i16@0xec00 bmdma 0xdc00 irq 19
[   10.952384] ata2: SATA max UDMA/133 port i16@0xe800 bmdma 0xdc08 irq 19
[   10.952389] ata3: PATA max UDMA/133 port i16@0xe400 bmdma 0xdc10 irq 19
[   10.975400] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   10.975468] 8139cp 0000:00:13.0: >This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   10.979732] pata_via 0000:00:11.1: >version 0.3.4
[   10.979773] pata_via 0000:00:11.1: >can't derive routing for PCI INT A
[   10.987732] [drm] Initialized drm 1.1.0 20060810
[   11.009114] scsi3 : pata_via
[   11.012612] scsi4 : pata_via
[   11.026324] ata4: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[   11.026339] ata5: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[   11.222249] ata4.00: ATA-7: ST3160815A, 3.AAD, max UDMA/100
[   11.222264] ata4.00: 312581808 sectors, multi 16: LBA48 
[   11.282735] ata1: SATA link down (SStatus 0 SControl 310)
[   11.288986] ata4.00: configured for UDMA/100
[   11.610641] ata2: SATA link down (SStatus 0 SControl 310)
[   11.775626] scsi 3:0:0:0: >Direct-Access     ATA      ST3160815A       3.AA PQ: 0 ANSI: 5
[   11.776714] sd 3:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[   11.776853] sd 3:0:0:0: >[sda] Write Protect is off
[   11.776862] sd 3:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[   11.776920] sd 3:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.778712] sd 3:0:0:0: >Attached scsi generic sg0 type 0
[   11.819773]  sda: sda1 sda2 < sda5 >
[   11.821297] sd 3:0:0:0: >[sda] Attached SCSI disk
[   11.940430] ata5.00: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
[   11.940449] ata5.00: limited to UDMA/33 due to 40-wire cable
[   11.956266] ata5.00: configured for UDMA/33
[   11.958363] scsi 4:0:0:0: >CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
[   11.959899] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   11.959915] cdrom: Uniform CD-ROM driver Revision: 3.20
[   11.960338] sr 4:0:0:0: >Attached scsi CD-ROM sr0
[   11.960690] sr 4:0:0:0: >Attached scsi generic sg1 type 5
[   11.964535] 8139too: 8139too Fast Ethernet driver 0.9.28
[   11.965467] 8139too 0000:00:13.0: >eth0: RealTek RTL8139 at 0x0001c000, 00:20:ed:75:80:74, IRQ 18
[   12.060255] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000b2)
[   12.064827] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[   12.096161] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   12.096174] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[   12.096477] [drm] nouveau 0000:01:00.0: BMP BIOS found
[   12.096482] [drm] nouveau 0000:01:00.0: BMP version 5.20
[   12.096488] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.48
[   12.096496] [drm] nouveau 0000:01:00.0: No useful DCB data in VBIOS
[   12.100719] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[   12.102172] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xADFE
[   12.102195] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB4EC
[   12.102207] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAE19
[   12.102234] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB493
[   12.102249] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xAEAC
[   12.102255] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xB000
[   12.102281] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xAED1
[   12.102353] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xAF9B
[   12.102999] [TTM] Zone  kernel: Available graphics memory: 445996 kiB
[   12.103009] [TTM] Zone highmem: Available graphics memory: 513552 kiB
[   12.103013] [TTM] Initializing pool allocator
[   12.103026] [TTM] Initializing DMA pool allocator
[   12.103058] [drm] nouveau 0000:01:00.0: Detected 32MiB VRAM (SDRAM)
[   12.103341] agpgart-via 0000:00:00.0: >AGP 2.0 bridge
[   12.103385] agpgart-via 0000:00:00.0: >putting AGP V2 device into 4x mode
[   12.103450] nouveau 0000:01:00.0: >putting AGP V2 device into 4x mode
[   12.103457] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[   12.103614] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[   12.144544] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.144560] [drm] No driver support for vblank timestamp query.
[   12.144685] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[   12.144694] [drm] nouveau 0000:01:00.0: c: core 199MHz memory 143MHz
[   12.147414] [drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
[   12.147440] [drm] nouveau 0000:01:00.0: 0xB704: Parsing digital output script table
[   12.147852] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   12.147858] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[   12.198693] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x48000, bo f554d000
[   12.199238] fbcon: nouveaufb (fb0) is primary device
[   12.211464] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   12.211469] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[   12.213015] Console: switching to colour frame buffer device 160x64
[   12.214405] fb0: nouveaufb frame buffer device
[   12.214409] drm: registered panic notifier
[   12.214425] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   15.654149] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   15.674379] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   15.674387] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[   15.674510] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   15.694693] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   15.694697] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[   15.713428] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   15.733645] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   15.733653] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[   15.760189] xor: automatically using best checksumming function:
[   15.800013]    pIII_sse  :   947.000 MB/sec
[   15.831646] device-mapper: dm-raid45: initialized v0.2594b
[   16.244982] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[   16.245000] EXT4-fs (sda1): write access will be enabled during recovery
[   28.892488] EXT4-fs (sda1): recovery complete
[   28.908472] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   29.638302] ISO 9660 Extensions: Microsoft Joliet Level 3
[   29.645342] ISO 9660 Extensions: RRIP_1991A
[   30.107839] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   83.545850] Adding 1046524k swap on /dev/sda5.  Priority:-1 extents:1 across:1046524k 
[   83.725780] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   84.385599] udevd[1137]: starting version 175
[   87.594230] Bluetooth: Core ver 2.16
[   87.597071] NET: Registered protocol family 31
[   87.597085] Bluetooth: HCI device and connection manager initialized
[   87.597092] Bluetooth: HCI socket layer initialized
[   87.597096] Bluetooth: L2CAP socket layer initialized
[   87.597128] Bluetooth: SCO socket layer initialized
[   87.820710] lp: driver loaded but no devices found
[   87.831565] Bluetooth: RFCOMM TTY layer initialized
[   87.831587] Bluetooth: RFCOMM socket layer initialized
[   87.831591] Bluetooth: RFCOMM ver 1.11
[   87.945466] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   87.945481] Bluetooth: BNEP filters: protocol multicast
[   88.063163] ppdev: user-space parallel port driver
[   88.496173] parport_pc 00:04: >reported by Plug and Play ACPI
[   88.496279] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   88.593833] lp0: using parport0 (interrupt-driven).
[   89.589057] microcode: AMD CPU family 0x6 not supported
[   89.869411] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   90.986550] device-mapper: multipath: version 1.4.0 loaded
[   91.499854] irda_init()
[   91.499910] NET: Registered protocol family 23
[   91.700297] gameport gameport0: >NS558 PnP Gameport is pnp00:05/gameport0, io 0x201, speed 946kHz
[   92.811699] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   93.107955] init: failsafe main process (1364) killed by TERM signal
[   99.129737] snd_via82xx 0000:00:11.5: >setting latency timer to 64
[  105.016936] init: alsa-restore main process (1520) terminated with status 99
[  107.845401] 8139too 0000:00:13.0: >eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  280.689308] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[  280.709558] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[  280.709564] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[  283.899999] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[  283.920292] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[  283.920300] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
26.02.2013 21:45 #305290
text
xubuntu@xubuntu:~$ lspci -k
00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge
    Subsystem: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge
    Kernel driver in use: agpgart-via
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
    Kernel modules: shpchp
00:0a.0 Communication controller: LSI Corporation LT WinModem (rev 02)
    Subsystem: LSI Corporation LT WinModem
00:0b.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA Controller (rev 50)
    Subsystem: VIA Technologies, Inc. VT6421 IDE/SATA Controller
    Kernel driver in use: sata_via
    Kernel modules: sata_via
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Kernel driver in use: uhci_hcd
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Kernel driver in use: uhci_hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
    Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
    Kernel modules: i2c-viapro, via-ircc
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
    Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
    Kernel driver in use: pata_via
    Kernel modules: pata_via
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
    Subsystem: Giga-byte Technology GA-7VAX Onboard Audio (Realtek ALC650)
    Kernel driver in use: snd_via82xx
    Kernel modules: snd-via82xx
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
    Kernel driver in use: 8139too
    Kernel modules: 8139too, 8139cp
01:00.0 VGA compatible controller: NVIDIA Corporation NV11 [GeForce2 MX/MX 400] (rev b2)
    Kernel driver in use: nouveau
    Kernel modules: nouveau, nvidiafb, rivafb
xubuntu@xubuntu:~$ ^C
xubuntu@xubuntu:~$
text
xubuntu@xubuntu:~$ cat /var/log/Xorg.0.log
[   283.704] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[   283.704] X Protocol Version 11, Revision 0
[   283.704] Build Operating System: Linux 3.2.0-26-generic i686 Ubuntu
[   283.704] Current Operating System: Linux xubuntu 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 i686
[   283.704] Kernel command line: file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[   283.704] Build Date: 08 October 2012  03:34:08PM
[   283.704] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support) 
[   283.704] Current version of pixman: 0.26.0
[   283.704]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   283.704] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   283.705] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 26 17:39:32 2013
[   283.706] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   283.707] (==) No Layout section.  Using the first Screen section.
[   283.707] (==) No screen section available. Using defaults.
[   283.707] (**) |-->Screen "Default Screen Section" (0)
[   283.707] (**) |   |-->Monitor "<default monitor>"
[   283.707] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   283.707] (==) Automatically adding devices
[   283.707] (==) Automatically enabling devices
[   283.707] (==) Automatically adding GPU devices
[   283.712] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   283.712]     Entry deleted from font path.
[   283.712] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   283.712]     Entry deleted from font path.
[   283.712] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   283.712]     Entry deleted from font path.
[   283.712] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   283.712]     Entry deleted from font path.
[   283.712] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   283.712]     Entry deleted from font path.
[   283.712] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   283.712]     Entry deleted from font path.
[   283.712] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[   283.712] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   283.712] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   283.712] (II) Loader magic: 0xb7790640
[   283.712] (II) Module ABI versions:
[   283.712]     X.Org ANSI C Emulation: 0.4
[   283.712]     X.Org Video Driver: 13.0
[   283.712]     X.Org XInput driver : 18.0
[   283.712]     X.Org Server Extension : 7.0
[   283.713] (II) config/udev: Adding drm device (/dev/dri/card0)
[   283.720] (--) PCI:*(0:1:0:0) 10de:0110:0000:0000 rev 178, Mem @ 0xde000000/16777216, 0xd0000000/134217728, BIOS @ 0x????????/65536
[   283.721] (II) Open ACPI successful (/var/run/acpid.socket)
[   283.721] Initializing built-in extension Generic Event Extension
[   283.721] Initializing built-in extension SHAPE
[   283.721] Initializing built-in extension MIT-SHM
[   283.721] Initializing built-in extension XInputExtension
[   283.721] Initializing built-in extension XTEST
[   283.721] Initializing built-in extension BIG-REQUESTS
[   283.721] Initializing built-in extension SYNC
[   283.721] Initializing built-in extension XKEYBOARD
[   283.721] Initializing built-in extension XC-MISC
[   283.721] Initializing built-in extension SECURITY
[   283.721] Initializing built-in extension XINERAMA
[   283.721] Initializing built-in extension XFIXES
[   283.721] Initializing built-in extension RENDER
[   283.721] Initializing built-in extension RANDR
[   283.721] Initializing built-in extension COMPOSITE
[   283.721] Initializing built-in extension DAMAGE
[   283.721] Initializing built-in extension MIT-SCREEN-SAVER
[   283.721] Initializing built-in extension DOUBLE-BUFFER
[   283.721] Initializing built-in extension RECORD
[   283.721] Initializing built-in extension DPMS
[   283.721] Initializing built-in extension X-Resource
[   283.721] Initializing built-in extension XVideo
[   283.721] Initializing built-in extension XVideo-MotionCompensation
[   283.721] Initializing built-in extension XFree86-VidModeExtension
[   283.721] Initializing built-in extension XFree86-DGA
[   283.721] Initializing built-in extension XFree86-DRI
[   283.721] Initializing built-in extension DRI2
[   283.721] (II) LoadModule: "glx"
[   283.723] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   283.723] (II) Module glx: vendor="X.Org Foundation"
[   283.724]     compiled for 1.13.0, module version = 1.0.0
[   283.724]     ABI class: X.Org Server Extension, version 7.0
[   283.724] (==) AIGLX enabled
[   283.724] Loading extension GLX
[   283.724] (==) Matched nvidia as autoconfigured driver 0
[   283.724] (==) Matched nouveau as autoconfigured driver 1
[   283.724] (==) Matched nv as autoconfigured driver 2
[   283.724] (==) Matched nvidia as autoconfigured driver 3
[   283.724] (==) Matched nouveau as autoconfigured driver 4
[   283.724] (==) Matched nv as autoconfigured driver 5
[   283.724] (==) Matched vesa as autoconfigured driver 6
[   283.724] (==) Matched modesetting as autoconfigured driver 7
[   283.724] (==) Matched fbdev as autoconfigured driver 8
[   283.724] (==) Assigned the driver to the xf86ConfigLayout
[   283.724] (II) LoadModule: "nvidia"
[   283.725] (WW) Warning, couldn't open module nvidia
[   283.725] (II) UnloadModule: "nvidia"
[   283.725] (II) Unloading nvidia
[   283.725] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   283.725] (II) LoadModule: "nouveau"
[   283.726] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   283.727] (II) Module nouveau: vendor="X.Org Foundation"
[   283.727]     compiled for 1.13.0, module version = 1.0.2
[   283.727]     Module class: X.Org Video Driver
[   283.727]     ABI class: X.Org Video Driver, version 13.0
[   283.727] (II) LoadModule: "nv"
[   283.741] (WW) Warning, couldn't open module nv
[   283.741] (II) UnloadModule: "nv"
[   283.741] (II) Unloading nv
[   283.741] (EE) Failed to load module "nv" (module does not exist, 0)
[   283.741] (II) LoadModule: "vesa"
[   283.741] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   283.742] (II) Module vesa: vendor="X.Org Foundation"
[   283.742]     compiled for 1.12.99.902, module version = 2.3.2
[   283.742]     Module class: X.Org Video Driver
[   283.742]     ABI class: X.Org Video Driver, version 13.0
[   283.742] (II) LoadModule: "modesetting"
[   283.742] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   283.743] (II) Module modesetting: vendor="X.Org Foundation"
[   283.743]     compiled for 1.13.0, module version = 0.5.0
[   283.743]     Module class: X.Org Video Driver
[   283.743]     ABI class: X.Org Video Driver, version 13.0
[   283.743] (II) LoadModule: "fbdev"
[   283.751] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   283.752] (II) Module fbdev: vendor="X.Org Foundation"
[   283.752]     compiled for 1.12.99.902, module version = 0.4.3
[   283.752]     Module class: X.Org Video Driver
[   283.752]     ABI class: X.Org Video Driver, version 13.0
[   283.752] (==) Matched nvidia as autoconfigured driver 0
[   283.752] (==) Matched nouveau as autoconfigured driver 1
[   283.752] (==) Matched nv as autoconfigured driver 2
[   283.752] (==) Matched nvidia as autoconfigured driver 3
[   283.752] (==) Matched nouveau as autoconfigured driver 4
[   283.752] (==) Matched nv as autoconfigured driver 5
[   283.752] (==) Matched vesa as autoconfigured driver 6
[   283.752] (==) Matched modesetting as autoconfigured driver 7
[   283.752] (==) Matched fbdev as autoconfigured driver 8
[   283.752] (==) Assigned the driver to the xf86ConfigLayout
[   283.752] (II) LoadModule: "nvidia"
[   283.753] (WW) Warning, couldn't open module nvidia
[   283.753] (II) UnloadModule: "nvidia"
[   283.753] (II) Unloading nvidia
[   283.754] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   283.754] (II) LoadModule: "nouveau"
[   283.754] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   283.754] (II) Module nouveau: vendor="X.Org Foundation"
[   283.754]     compiled for 1.13.0, module version = 1.0.2
[   283.754]     Module class: X.Org Video Driver
[   283.754]     ABI class: X.Org Video Driver, version 13.0
[   283.754] (II) UnloadModule: "nouveau"
[   283.754] (II) Unloading nouveau
[   283.754] (II) Failed to load module "nouveau" (already loaded, 0)
[   283.754] (II) LoadModule: "nv"
[   283.755] (WW) Warning, couldn't open module nv
[   283.755] (II) UnloadModule: "nv"
[   283.755] (II) Unloading nv
[   283.755] (EE) Failed to load module "nv" (module does not exist, 0)
[   283.755] (II) LoadModule: "vesa"
[   283.756] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   283.756] (II) Module vesa: vendor="X.Org Foundation"
[   283.756]     compiled for 1.12.99.902, module version = 2.3.2
[   283.756]     Module class: X.Org Video Driver
[   283.756]     ABI class: X.Org Video Driver, version 13.0
[   283.756] (II) UnloadModule: "vesa"
[   283.756] (II) Unloading vesa
[   283.756] (II) Failed to load module "vesa" (already loaded, 0)
[   283.756] (II) LoadModule: "modesetting"
[   283.757] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   283.757] (II) Module modesetting: vendor="X.Org Foundation"
[   283.757]     compiled for 1.13.0, module version = 0.5.0
[   283.757]     Module class: X.Org Video Driver
[   283.757]     ABI class: X.Org Video Driver, version 13.0
[   283.757] (II) UnloadModule: "modesetting"
[   283.757] (II) Unloading modesetting
[   283.757] (II) Failed to load module "modesetting" (already loaded, 0)
[   283.757] (II) LoadModule: "fbdev"
[   283.757] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   283.757] (II) Module fbdev: vendor="X.Org Foundation"
[   283.757]     compiled for 1.12.99.902, module version = 0.4.3
[   283.757]     Module class: X.Org Video Driver
[   283.757]     ABI class: X.Org Video Driver, version 13.0
[   283.757] (II) UnloadModule: "fbdev"
[   283.757] (II) Unloading fbdev
[   283.758] (II) Failed to load module "fbdev" (already loaded, 0)
[   283.758] (II) NOUVEAU driver Date:   Wed Sep 12 13:42:43 2012 +0200
[   283.758] (II) NOUVEAU driver for NVIDIA chipset families :
[   283.758]     RIVA TNT        (NV04)
[   283.758]     RIVA TNT2       (NV05)
[   283.758]     GeForce 256     (NV10)
[   283.758]     GeForce 2       (NV11, NV15)
[   283.758]     GeForce 4MX     (NV17, NV18)
[   283.758]     GeForce 3       (NV20)
[   283.758]     GeForce 4Ti     (NV25, NV28)
[   283.758]     GeForce FX      (NV3x)
[   283.758]     GeForce 6       (NV4x)
[   283.758]     GeForce 7       (G7x)
[   283.758]     GeForce 8       (G8x)
[   283.758]     GeForce GTX 200 (NVA0)
[   283.758]     GeForce GTX 400 (NVC0)
[   283.758] (II) VESA: driver for VESA chipsets: vesa
[   283.758] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   283.758] (II) FBDEV: driver for framebuffer: fbdev
[   283.758] (++) using VT number 7

[   283.759] (WW) Falling back to old probe method for vesa
[   283.759] (WW) Falling back to old probe method for modesetting
[   283.759] (WW) Falling back to old probe method for fbdev
[   283.759] (II) Loading sub module "fbdevhw"
[   283.759] (II) LoadModule: "fbdevhw"
[   283.760] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   283.760] (II) Module fbdevhw: vendor="X.Org Foundation"
[   283.760]     compiled for 1.13.0, module version = 0.0.2
[   283.760]     ABI class: X.Org Video Driver, version 13.0
[   283.760] (II) Loading sub module "dri"
[   283.761] (II) LoadModule: "dri"
[   283.761] (II) Module "dri" already built-in
[   283.761] (II) NOUVEAU(0): Loaded DRI module
[   283.761] (II) [drm] DRM interface version 1.4
[   283.761] (II) [drm] DRM open master succeeded.
[   283.761] (--) NOUVEAU(0): Chipset: "NVIDIA NV11"
[   283.761] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   283.761] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[   283.761] (==) NOUVEAU(0): RGB weight 888
[   283.761] (==) NOUVEAU(0): Default visual is TrueColor
[   283.762] (==) NOUVEAU(0): Using HW cursor
[   283.762] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[   283.762] (==) NOUVEAU(0): Page flipping enabled
[   283.762] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[   283.792] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[   283.823] (II) NOUVEAU(0): EDID for output DVI-I-1
[   283.823] (II) NOUVEAU(0): Manufacturer: PHL  Model: 839  Serial#: 310486
[   283.823] (II) NOUVEAU(0): Year: 2006  Week: 37
[   283.823] (II) NOUVEAU(0): EDID Version: 1.3
[   283.823] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   283.823] (II) NOUVEAU(0): Sync:  Separate  Composite  SyncOnGreen
[   283.823] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[   283.823] (II) NOUVEAU(0): Gamma: 2.20
[   283.823] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[   283.823] (II) NOUVEAU(0): Default color space is primary color space
[   283.823] (II) NOUVEAU(0): First detailed timing is preferred mode
[   283.823] (II) NOUVEAU(0): redX: 0.639 redY: 0.339   greenX: 0.284 greenY: 0.604
[   283.823] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.085   whiteX: 0.313 whiteY: 0.329
[   283.823] (II) NOUVEAU(0): Supported established timings:
[   283.823] (II) NOUVEAU(0): 720x400@70Hz
[   283.823] (II) NOUVEAU(0): 640x480@60Hz
[   283.823] (II) NOUVEAU(0): 640x480@67Hz
[   283.823] (II) NOUVEAU(0): 640x480@72Hz
[   283.823] (II) NOUVEAU(0): 640x480@75Hz
[   283.823] (II) NOUVEAU(0): 800x600@56Hz
[   283.823] (II) NOUVEAU(0): 800x600@60Hz
[   283.823] (II) NOUVEAU(0): 800x600@72Hz
[   283.823] (II) NOUVEAU(0): 800x600@75Hz
[   283.823] (II) NOUVEAU(0): 832x624@75Hz
[   283.823] (II) NOUVEAU(0): 1024x768@60Hz
[   283.823] (II) NOUVEAU(0): 1024x768@70Hz
[   283.823] (II) NOUVEAU(0): 1024x768@75Hz
[   283.823] (II) NOUVEAU(0): 1280x1024@75Hz
[   283.823] (II) NOUVEAU(0): 1152x864@75Hz
[   283.823] (II) NOUVEAU(0): Manufacturer's mask: 0
[   283.823] (II) NOUVEAU(0): Supported standard timings:
[   283.823] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   283.823] (II) NOUVEAU(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   283.823] (II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   283.823] (II) NOUVEAU(0): Supported detailed timing:
[   283.823] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[   283.823] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[   283.823] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[   283.823] (II) NOUVEAU(0): Serial No: BZ30637310486
[   283.823] (II) NOUVEAU(0): Monitor name: Philips 170S
[   283.823] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[   283.823] (II) NOUVEAU(0): EDID (in hex):
[   283.823] (II) NOUVEAU(0):     00ffffffffffff00410c3908d6bc0400
[   283.823] (II) NOUVEAU(0):     251001030e221b78eebeb5a356489a24
[   283.823] (II) NOUVEAU(0):     155054bfef80714f8140818001010101
[   283.823] (II) NOUVEAU(0):     010101010101302a009851002a403070
[   283.823] (II) NOUVEAU(0):     1300520e1100001e000000ff00425a33
[   283.823] (II) NOUVEAU(0):     30363337333130343836000000fc0050
[   283.823] (II) NOUVEAU(0):     68696c69707320313730530a000000fd
[   283.823] (II) NOUVEAU(0):     00384c1e530e000a202020202020009c
[   283.824] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[   283.824] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   283.824] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1280x768"x74.9  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "1024x576"x60.0   46.97  1024 1064 1168 1312  576 577 580 597 -hsync +vsync (35.8 kHz)
[   283.824] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   283.824] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   283.824] (II) NOUVEAU(0): Output DVI-I-1 connected
[   283.824] (II) NOUVEAU(0): Using exact sizes for initial modes
[   283.824] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1280x1024
[   283.824] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   283.824] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[   283.824] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[   283.824] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   283.824] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[   283.824] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   283.824] (**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[   283.824] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   283.824] (**) NOUVEAU(0):  Driver mode "1280x800": 106.5 MHz (scaled from 0.0 MHz), 62.8 kHz, 74.9 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1280x768"x74.9  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   283.825] (**) NOUVEAU(0):  Mode "1024x576": 47.0 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
[   283.825] (II) NOUVEAU(0): Modeline "1024x576"x60.0   46.97  1024 1064 1168 1312  576 577 580 597 -hsync +vsync (35.8 kHz)
[   283.825] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[   283.825] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[   283.825] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[   283.825] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[   283.825] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[   283.825] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
[   283.825] (II) NOUVEAU(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[   283.825] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[   283.825] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[   283.825] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[   283.825] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   283.825] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[   283.825] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   283.825] (==) NOUVEAU(0): DPI set to (96, 96)
[   283.825] (II) Loading sub module "fb"
[   283.825] (II) LoadModule: "fb"
[   283.826] (II) Loading /usr/lib/xorg/modules/libfb.so
[   283.827] (II) Module fb: vendor="X.Org Foundation"
[   283.827]     compiled for 1.13.0, module version = 1.0.0
[   283.827]     ABI class: X.Org ANSI C Emulation, version 0.4
[   283.827] (II) Loading sub module "exa"
[   283.827] (II) LoadModule: "exa"
[   283.828] (II) Loading /usr/lib/xorg/modules/libexa.so
[   283.828] (II) Module exa: vendor="X.Org Foundation"
[   283.828]     compiled for 1.13.0, module version = 2.6.0
[   283.828]     ABI class: X.Org Video Driver, version 13.0
[   283.828] (II) Loading sub module "shadowfb"
[   283.828] (II) LoadModule: "shadowfb"
[   283.829] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   283.830] (II) Module shadowfb: vendor="X.Org Foundation"
[   283.830]     compiled for 1.13.0, module version = 1.0.0
[   283.830]     ABI class: X.Org ANSI C Emulation, version 0.4
[   283.830] (II) UnloadModule: "vesa"
[   283.830] (II) Unloading vesa
[   283.830] (II) UnloadModule: "modesetting"
[   283.830] (II) Unloading modesetting
[   283.830] (II) UnloadModule: "fbdev"
[   283.830] (II) Unloading fbdev
[   283.830] (II) UnloadSubModule: "fbdevhw"
[   283.830] (II) Unloading fbdevhw
[   283.830] (--) Depth 24 pixmap format is 32 bpp
[   283.831] (II) NOUVEAU(0): Opened GPU channel 1
[   283.832] (II) NOUVEAU(0): [DRI2] Setup complete
[   283.832] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau_vieux
[   283.832] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau_vieux
[   283.833] (II) EXA(0): Driver allocated offscreen pixmaps
[   283.833] (II) EXA(0): Driver registered support for the following operations:
[   283.833] (II)         Solid
[   283.833] (II)         Copy
[   283.833] (II)         Composite (RENDER acceleration)
[   283.833] (II)         UploadToScreen
[   283.833] (II)         DownloadFromScreen
[   283.833] (==) NOUVEAU(0): Backing store disabled
[   283.833] (==) NOUVEAU(0): Silken mouse enabled
[   283.833] (==) NOUVEAU(0): DPMS enabled
[   283.833] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   283.834] (--) RandR disabled
[   283.868] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   283.869] (II) AIGLX: enabled GLX_INTEL_swap_event
[   283.869] (II) AIGLX: enabled GLX_ARB_create_context
[   283.869] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   283.869] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   283.869] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   283.869] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   283.869] (II) AIGLX: Loaded and initialized nouveau_vieux
[   283.869] (II) GLX: Initialized DRI2 GL provider for screen 0
[   283.899] (II) NOUVEAU(0): NVEnterVT is called.
[   283.920] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[   283.920] resize called 1280 1024
[   283.950] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   283.960] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   283.961] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   283.961] (II) LoadModule: "evdev"
[   283.961] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   283.962] (II) Module evdev: vendor="X.Org Foundation"
[   283.962]     compiled for 1.13.0, module version = 2.7.3
[   283.962]     Module class: X.Org XInput Driver
[   283.962]     ABI class: X.Org XInput driver, version 18.0
[   283.962] (II) Using input driver 'evdev' for 'Power Button'
[   283.962] (**) Power Button: always reports core events
[   283.963] (**) evdev: Power Button: Device: "/dev/input/event2"
[   283.963] (--) evdev: Power Button: Vendor 0 Product 0x1
[   283.963] (--) evdev: Power Button: Found keys
[   283.963] (II) evdev: Power Button: Configuring as keyboard
[   283.963] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   283.963] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   283.963] (**) Option "xkb_rules" "evdev"
[   283.963] (**) Option "xkb_model" "pc105"
[   283.963] (**) Option "xkb_layout" "us"
[   283.966] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   283.966] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   283.966] (II) Using input driver 'evdev' for 'Power Button'
[   283.966] (**) Power Button: always reports core events
[   283.966] (**) evdev: Power Button: Device: "/dev/input/event0"
[   283.966] (--) evdev: Power Button: Vendor 0 Product 0x1
[   283.966] (--) evdev: Power Button: Found keys
[   283.966] (II) evdev: Power Button: Configuring as keyboard
[   283.966] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[   283.966] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   283.966] (**) Option "xkb_rules" "evdev"
[   283.966] (**) Option "xkb_model" "pc105"
[   283.966] (**) Option "xkb_layout" "us"
[   283.969] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   283.969] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   283.969] (II) Using input driver 'evdev' for 'Sleep Button'
[   283.969] (**) Sleep Button: always reports core events
[   283.969] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   283.969] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   283.969] (--) evdev: Sleep Button: Found keys
[   283.969] (II) evdev: Sleep Button: Configuring as keyboard
[   283.969] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[   283.969] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   283.969] (**) Option "xkb_rules" "evdev"
[   283.969] (**) Option "xkb_model" "pc105"
[   283.969] (**) Option "xkb_layout" "us"
[   283.971] (II) config/udev: Adding drm device (/dev/dri/card0)
[   283.972] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   283.973] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   283.973] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   283.973] (**) AT Translated Set 2 keyboard: always reports core events
[   283.973] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[   283.973] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   283.973] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   283.973] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   283.973] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[   283.973] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[   283.973] (**) Option "xkb_rules" "evdev"
[   283.973] (**) Option "xkb_model" "pc105"
[   283.973] (**) Option "xkb_layout" "us"
[   283.975] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4)
[   283.975] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[   283.976] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[   283.976] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[   283.976] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event4"
[   283.976] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[   283.976] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[   283.976] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[   283.976] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[   283.976] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[   283.976] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[   283.976] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[   283.976] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[   283.976] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   283.976] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[   283.976] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[   283.977] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[   283.977] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[   283.977] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[   283.977] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[   283.977] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[   283.978] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[   283.979] (II) No input driver specified, ignoring this device.
[   283.979] (II) This device may have been added with another device file.
[   288.255] (II) NOUVEAU(0): EDID vendor "PHL", prod id 2105
[   288.255] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[   288.255] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[   288.255] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   288.255] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   288.255] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   288.255] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   288.256] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   288.256] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   288.256] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   293.794] (II) NOUVEAU(0): EDID vendor "PHL", prod id 2105
[   293.794] (II) NOUVEAU(0): Using hsync ranges from config file
[   293.794] (II) NOUVEAU(0): Using vrefresh ranges from config file
[   293.794] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   293.794] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   293.794] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   293.794] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   293.795] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   293.795] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   293.795] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   293.795] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   293.795] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   293.848] (II) NOUVEAU(0): EDID vendor "PHL", prod id 2105
[   293.848] (II) NOUVEAU(0): Using hsync ranges from config file
[   293.848] (II) NOUVEAU(0): Using vrefresh ranges from config file
[   293.848] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   293.848] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   293.848] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   293.848] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   293.848] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   293.848] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   293.848] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   293.848] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   293.848] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   293.848] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   293.848] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   293.849] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   293.849] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   293.849] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   293.849] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   293.849] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   293.849] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   293.849] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
xubuntu@xubuntu:~$
26.02.2013 21:51 #305294

извиняюсь, не успел прочесть про pastebin

26.02.2013 23:30 #305311

У меня сегодня была похожая ситуация с Lubuntu. Оказалась, что память битая.

03.03.2013 10:50 #306307

Решено установкой Ubuntu 6. Нет презентации - нет проблемы *OK*

03.03.2013 13:09 #306331
sullen написал:
Решено установкой Ubuntu 6. Нет презентации - нет проблемы *OK*

Что значит Ubuntu 6? Древняя неподдерживаемая версия 6.06?

03.03.2013 14:37 #306343
rizado написал:

Что значит Ubuntu 6? Древняя неподдерживаемая версия 6.06?

точно, она

03.03.2013 14:40 #306344

Это гробокопательство. Как вариант, ставить НЕ Убунту...

03.03.2013 14:45 #306345
karl_muenhgausen написал:
Это гробокопательство. Как вариант, ставить НЕ Убунту...

уже качаю мандриву, хотя как последний отчаянный рывок: имплантировал хард с того компа на другой, и пытаюсь поставить убунту через него. кстати, уже идёт второй слайд этой долбаной презентации, так что надеюсь мандрива мне не понадобится.

03.03.2013 14:55 #306346

КОГО??? Покойницу-то зачем трогать? Нет давно никакой Мандривы, есть Магейя.

03.03.2013 15:00 #306350

Извините, не удосужился изучить родословную линукса и не знаю ещё кто покойник а кто нет :) в любом случае Ubuntu Studio уже почсти встала, так что покойники не будут потревожены, если вдруг не случится какой-нибудь нежданчик

Войдите или зарегистрируйтесь, чтобы ответить.