Блин, это я лоханулся! Я ее еще и в screen вставил, убрал, ребут.
Ну ни фига себе!!! smile Я рад что разрешение сменилось)))
Только оно теперь почему то 640х480 и 31х60Гц. :D
Что это за опция UseEDID?
Да еще это теперь в настройках максимальное разрешение монитора.
Разрешение и частота монитора
Всегда считал что для каждого монитора генерит свои данные и если топикстартер просто взял вашу строчку то ничего хорошего не должен получить а вот если сам сгенерил другой разговор, возможно я ошибаюсь.komcumir, да какая разница чья утилита сгенерила.
UseEDID false запрещает автоматическую подстройку разрешения или как-то так )
komcumir, ну сгенерите тоже самое. Давайте сравним. У меня Nec p221W
Benzin, не вижу всего конфига и логов!
Конфиг иксов:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# 1152x864 @ 75.00 Hz (GTF) hsync: 67.65 kHz; pclk: 104.99 MHz
Modeline "1152x864_75.00" 104.99 1152 1224 1352 1552 864 865 868 902 -HSync +Vsync
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer AL1916W"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "UseEDID" "false"
Option "TwinView" "0"
Option "metamodes" "1024x768_75 +0+0; 1024x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
при UseEDID false максимальное разрешение 640х480, а при true 1440х900 и не меняется.
Не вижу лога. Тот, который /var/log/Xorg0.log
+ убрать
Option "metamodes" "1024x768_75 +0+0; 1024x768 +0+0"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0+ сделать так, чтобы
Section "Monitor"
...
Modeline "1152x864_75.00" 104.99 1152 1224 1352 1552 864 865 868 902 -HSync +Vsync
...
EndSection
Section "Screen"
...
SubSection "Display"
Depth 24
Modes "1152x864_75.00"
EndSubSection
...
EndSection
Section "Monitor"
...
Modeline "1152x864_75.00" 104.99 1152 1224 1352 1552 864 865 868 902 -HSync +Vsync
...
EndSection
А у меня как?
log не могу выложить, он почему-то на сайт не качается и в сообщение не вставишь.
Nightwolf_ng
Сделал, как ты написал, результат тот же. :(
log не могу выложить, он почему-то на сайт не качается и в сообщение не вставишь.
вот лог
|X.Org X Server 1.6.4
|Release Date: 2009-9-27
|X Protocol Version 11, Revision 0
|Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
|Current Operating System: Linux ubuntu 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
|Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=5e52436e-e85f-43cf-a46c-50a41af2d044 ro quiet splash
|Build Date: 26 October 2009 05:15:02PM
|xorg-server 2:1.6.4-2ubuntu4 (buildd@)
| Before reporting problems, check [url]http://wiki.x.org[/url]
| to make sure that you have the latest version.
|Markers: (--) probed, (**) from config file, (==) default setting,
| (++) from command line, (!!) notice, (II) informational,
| (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
|(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 2 20:32:32 2010
|(==) Using config file: "/etc/X11/xorg.conf"
|(==) ServerLayout "Layout0"
|(**) |-->Screen "Screen0" (0)
|(**) | |-->Monitor "Monitor0"
|(**) | |-->Device "Device0"
|(**) |-->Input Device "Keyboard0"
|(**) |-->Input Device "Mouse0"
|(**) Option "Xinerama" "0"
|(==) Automatically adding devices
|(==) Automatically enabling devices
|(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
| Entry deleted from font path.
|(==) FontPath set to:
| /usr/share/fonts/X11/misc,
| /usr/share/fonts/X11/100dpi/:unscaled,
| /usr/share/fonts/X11/75dpi/:unscaled,
| /usr/share/fonts/X11/Type1,
| /usr/share/fonts/X11/100dpi,
| /usr/share/fonts/X11/75dpi,
| /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
| built-ins
|(==) ModulePath set to "/usr/lib/xorg/modules"
|(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
|(WW) Disabling Keyboard0
|(WW) Disabling Mouse0
|(II) Loader magic: 0x3bc0
|(II) Module ABI versions:
| X.Org ANSI C Emulation: 0.4
| X.Org Video Driver: 5.0
| X.Org XInput driver : 4.0
| X.Org Server Extension : 2.0
|(II) Loader running on linux
|(++) using VT number 7
|
|(--) PCI:*(0:1:0:0) 10de:0400:0000:0000 nVidia Corporation G84 [GeForce 8600 GTS] rev 161, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/131072
|(II) Open ACPI successful (/var/run/acpid.socket)
|(II) System resource ranges:
| [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[В]
| [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[В]
| [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[В]
| [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[В]
| [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[В]
| [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[В]
|(II) LoadModule: "extmod"
|(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
|(II) Module extmod: vendor="X.Org Foundation"
| compiled for 1.6.4, module version = 1.0.0
| Module class: X.Org Server Extension
| ABI class: X.Org Server Extension, version 2.0
|(II) Loading extension MIT-SCREEN-SAVER
|(II) Loading extension XFree86-VidModeExtension
|(II) Loading extension XFree86-DGA
|(II) Loading extension DPMS
|(II) Loading extension XVideo
|(II) Loading extension XVideo-MotionCompensation
|(II) Loading extension X-Resource
|(II) LoadModule: "dbe"
|(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
|(II) Module dbe: vendor="X.Org Foundation"
| compiled for 1.6.4, module version = 1.0.0
| Module class: X.Org Server Extension
| ABI class: X.Org Server Extension, version 2.0
|(II) Loading extension DOUBLE-BUFFER
|(II) LoadModule: "glx"
|(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
|(II) Module glx: vendor="NVIDIA Corporation"
| compiled for 4.0.2, module version = 1.0.0
| Module class: X.Org Server Extension
|(II) NVIDIA GLX Module 185.18.36 Fri Aug 14 17:50:12 PDT 2009
|(II) Loading extension GLX
|(II) LoadModule: "record"
|(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
|(II) Module record: vendor="X.Org Foundation"
| compiled for 1.6.4, module version = 1.13.0
| Module class: X.Org Server Extension
| ABI class: X.Org Server Extension, version 2.0
|(II) Loading extension RECORD
|(II) LoadModule: "dri"
|(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
|(II) Module dri: vendor="X.Org Foundation"
| compiled for 1.6.4, module version = 1.0.0
| ABI class: X.Org Server Extension, version 2.0
|(II) Loading extension XFree86-DRI
|(II) LoadModule: "dri2"
|(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
|(II) Module dri2: vendor="X.Org Foundation"
| compiled for 1.6.4, module version = 1.1.0
| ABI class: X.Org Server Extension, version 2.0
|(II) Loading extension DRI2
|(II) LoadModule: "nvidia"
|(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
|(II) Module nvidia: vendor="NVIDIA Corporation"
| compiled for 4.0.2, module version = 1.0.0
| Module class: X.Org Video Driver
|(II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:24:40 PDT 2009
|(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
|(II) Primary Device is: PCI 01@00:00:0
|(II) Loading sub module "fb"
|(II) LoadModule: "fb"
|(II) Loading /usr/lib/xorg/modules//libfb.so
|(II) Module fb: vendor="X.Org Foundation"
| compiled for 1.6.4, module version = 1.0.0
| ABI class: X.Org ANSI C Emulation, version 0.4
|(II) Loading sub module "wfb"
|(II) LoadModule: "wfb"
|(II) Loading /usr/lib/xorg/modules//libwfb.so
|(II) Module wfb: vendor="X.Org Foundation"
| compiled for 1.6.4, module version = 1.0.0
| ABI class: X.Org ANSI C Emulation, version 0.4
|(II) Loading sub module "ramdac"
|(II) LoadModule: "ramdac"
|(II) Module "ramdac" already built-in
|(II) resource ranges after probing:
| [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[В]
| [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[В]
| [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[В]
| [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[В]
| [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[В]
| [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[В]
|(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
|(==) NVIDIA(0): RGB weight 888
|(==) NVIDIA(0): Default visual is TrueColor
|(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
|(**) NVIDIA(0): Option "UseEDID" "true"
|(**) NVIDIA(0): Option "TwinView" "0"
|(**) NVIDIA(0): Option "MetaModes" "1024x768_75 +0+0; 1024x768 +0+0"
|(**) NVIDIA(0): Enabling RENDER acceleration
|(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
|(II) NVIDIA(0): enabled.
|(II) NVIDIA(0): NVIDIA GPU GeForce 8600 GTS (G84) at PCI:1:0:0 (GPU-0)
|(--) NVIDIA(0): Memory: 262144 kBytes
|(--) NVIDIA(0): VideoBIOS: 60.84.18.00.06
|(II) NVIDIA(0): Detected PCI Express Link width: 16X
|(--) NVIDIA(0): Interlaced video modes are supported on this GPU
|(--) NVIDIA(0): Connected display device(s) on GeForce 8600 GTS at PCI:1:0:0:
|(--) NVIDIA(0): Acer AL1916W (DFP-0)
|(--) NVIDIA(0): Acer AL1916W (DFP-0): 330.0 MHz maximum pixel clock
|(--) NVIDIA(0): Acer AL1916W (DFP-0): Internal Dual Link TMDS
|(II) NVIDIA(0): Assigned Display Device: DFP-0
|(II) NVIDIA(0): Validated modes:
|(II) NVIDIA(0): "1024x768_75+0+0"
|(II) NVIDIA(0): "1024x768+0+0"
|(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
|(--) NVIDIA(0): DPI set to (63, 75); computed from "UseEdidDpi" X config
|(--) NVIDIA(0): option
|(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
|(--) Depth 24 pixmap format is 32 bpp
|(II) do I need RAC? No, I don't.
|(II) resource ranges after preInit:
| [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[В]
| [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[В]
| [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[В]
| [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[В]
| [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[В]
| [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[В]
|(II) NVIDIA(0): Initialized GPU GART.
|(II) NVIDIA(0): Setting mode "1024x768_75+0+0"
|(II) Loading extension NV-GLX
|(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
|(==) NVIDIA(0): Disabling shared memory pixmaps
|(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
|(==) NVIDIA(0): Backing store disabled
|(==) NVIDIA(0): Silken mouse enabled
|(**) Option "dpms"
|(**) NVIDIA(0): DPMS enabled
|(II) Loading extension NV-CONTROL
|(II) Loading extension XINERAMA
|(==) RandR enabled
|(II) Initializing built-in extension Generic Event Extension
|(II) Initializing built-in extension SHAPE
|(II) Initializing built-in extension MIT-SHM
|(II) Initializing built-in extension XInputExtension
|(II) Initializing built-in extension XTEST
|(II) Initializing built-in extension BIG-REQUESTS
|(II) Initializing built-in extension SYNC
|(II) Initializing built-in extension XKEYBOARD
|(II) Initializing built-in extension XC-MISC
|(II) Initializing built-in extension SECURITY
|(II) Initializing built-in extension XINERAMA
|(II) Initializing built-in extension XFIXES
|(II) Initializing built-in extension RENDER
|(II) Initializing built-in extension RANDR
|(II) Initializing built-in extension COMPOSITE
|(II) Initializing built-in extension DAMAGE
|(II) Initializing extension GLX
|(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
|(II) LoadModule: "evdev"
|(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
|(II) Module evdev: vendor="X.Org Foundation"
| compiled for 1.6.4, module version = 2.2.5
| Module class: X.Org XInput Driver
| ABI class: X.Org XInput driver, version 4.0
|(**) ImPS/2 Generic Wheel Mouse: always reports core events
|(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
|(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
|(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
|(II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
|(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
|(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
|(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
|(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
|(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
|(**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00
|(**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms
|(**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0
|(II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
|(II) config/hal: Adding input device Power Button
|(**) Power Button: always reports core events
|(**) Power Button: Device: "/dev/input/event1"
|(II) Power Button: Found keys
|(II) Power Button: Configuring as keyboard
|(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
|(**) Option "xkb_rules" "evdev"
|(**) Option "xkb_model" "pc105"
|(**) Option "xkb_layout" "us,ru"
|(**) Option "xkb_variant" ","
|(**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,grp_led:scroll"
|(II) config/hal: Adding input device Power Button
|(**) Power Button: always reports core events
|(**) Power Button: Device: "/dev/input/event0"
|(II) Power Button: Found keys
|(II) Power Button: Configuring as keyboard
|(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
|(**) Option "xkb_rules" "evdev"
|(**) Option "xkb_model" "pc105"
|(**) Option "xkb_layout" "us,ru"
|(**) Option "xkb_variant" ","
|(**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,grp_led:scroll"
|(II) config/hal: Adding input device AT Translated Set 2 keyboard
|(**) AT Translated Set 2 keyboard: always reports core events
|(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
|(II) AT Translated Set 2 keyboard: Found keys
|(II) AT Translated Set 2 keyboard: Configuring as keyboard
|(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
|(**) Option "xkb_rules" "evdev"
|(**) Option "xkb_model" "pc105"
|(**) Option "xkb_layout" "us,ru"
|(**) Option "xkb_variant" ","
|(**) Option "xkb_options" "grp:alt_shift_toggle,lv3:ralt_switch,grp_led:scroll"
|(II) config/hal: Adding input device Macintosh mouse button emulation
|(**) Macintosh mouse button emulation: always reports core events
|(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
|(II) Macintosh mouse button emulation: Found 3 mouse buttons
|(II) Macintosh mouse button emulation: Found x and y relative axes
|(II) Macintosh mouse button emulation: Configuring as mouse
|(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
|(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
|(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
|(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
|(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
|(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
|(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
|(II) Macintosh mouse button emulation: initialized for relative axes.
(II) NVIDIA(0): Setting mode "1024x768_60"у меня к проблеме смены разрешения после перезагрузки добавилась проблема полного подвисания компа после выхода из ждущего режима. Приходится жесткий ресет делать.
На другом форуме люди написали, что это может быть связано с подключением по DVI.
Решил себе переустановить видео драйвер. Поставил 185(рекомендуемый). Теперь файл конфигурации не хочет сохранять.
Может драйвер такой - не хочет большую частоту.Для экспериментов есть ENVY - только если фатально кончится....
Решил себе переустановить видео драйвер. Поставил 185(рекомендуемый). Теперь файл конфигурации не хочет сохранять.
Запусти nvidia xserver от рута.
И еще такая фигня, только сейчас заметил: запускаю nvidia-settings, ставлю 1024х768_75, сохраняю xorg, выхожу, снова запускаю - все настройки на месте. Но когда пишу nvidia-settings -q RefreshRate, мне выдается Attribute 'RefreshRate' (ubuntu:0.0; display device: DFP-0): 59,89 Hz.
Может драйвер такой - не хочет большую частоту.Для экспериментов есть ENVY - только если фатально кончится....
Драйвер с оффициального сайта nvidia, последняя версия несколько дней назад закачал. Сразу после установки ubuntu.
Почитайте там - какие режимы поддерживает драйвер. И какие режимы поддерживает монитор.
Все, слава Богу, заработало, нужно было снять галочку в NVIDIA X Server Settings -> GPU 0 - (GeForce 8600 GT) -> DFP-0 -> Force Full GPU Scalling. А потом в X Server Display Configuraton установить нужную частоту обновления экрана и нажать Apply.
Потом добавить в /etc/X11/xorg.conf в секции "Screen":
Option "FlatPanelProperties" "Scaling = Native"