LinuxForum.Fans
Тема

Как настроить ТВ тюнер в Linux Mint?

Автор: K1890 36 сообщений 9698 просмотров
#204647

Подставил значение card=74. Всё то же самое. Программа показывает что "Громкость 0" а добавлять не получается. Ну и настройки не сохраняются. Сейчас по команде demsg консоль выдаёт немного другое:

Показать
[console][ 0.247875] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.247877] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.247878] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.247880] pci_bus 0000:02: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
[ 0.247882] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.247884] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.247885] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.247887] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.247889] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.247890] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff]
[ 0.247921] NET: Registered protocol family 2
[ 0.247977] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.248170] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.248527] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.248706] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.248708] TCP reno registered
[ 0.248710] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.248716] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.248773] NET: Registered protocol family 1
[ 0.248904] pci 0000:01:00.0: Boot video device
[ 0.248914] PCI: CLS 32 bytes, default 64
[ 0.249064] cpufreq-nforce2: No nForce2 chipset.
[ 0.249158] audit: initializing netlink socket (disabled)
[ 0.249164] type=2000 audit(1321031298.244:1): initialized
[ 0.255820] highmem bounce pool size: 64 pages
[ 0.255824] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.257214] VFS: Disk quotas dquot_6.5.2
[ 0.257258] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.257761] fuse init (API version 7.16)
[ 0.257831] msgmni has been set to 1641
[ 0.258003] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.258025] io scheduler noop registered
[ 0.258026] io scheduler deadline registered
[ 0.258037] io scheduler cfq registered (default)
[ 0.258123] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.258147] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.258185] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.258215] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.258262] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.258292] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.258338] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.258367] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.258434] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.258452] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.258506] intel_idle: MWAIT substates: 0x22220
[ 0.258507] intel_idle: does not run on family 6 model 23
[ 0.258582] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.258586] ACPI: Power Button [PWRB]
[ 0.258623] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.258625] ACPI: Power Button [PWRF]
[ 0.258765] ACPI: acpi_idle registered with cpuidle
[ 0.259964] ERST: Table is not found!
[ 0.260016] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.280336] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.280430] isapnp: Scanning for PnP cards...
[ 0.447950] Freeing initrd memory: 18084k freed
[ 0.633267] isapnp: No Plug & Play device found
[ 0.657641] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.657893] Linux agpgart interface v0.103
[ 0.659011] brd: module loaded
[ 0.659476] loop: module loaded
[ 0.659542] i2c-core: driver [adp5520] using legacy suspend method
[ 0.659544] i2c-core: driver [adp5520] using legacy resume method
[ 0.659627] ata_piix 0000:00:1f.2: version 2.13
[ 0.659647] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.659651] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.659691] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.659956] scsi0 : ata_piix
[ 0.660035] scsi1 : ata_piix
[ 0.661101] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.661105] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.661120] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.661124] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.661162] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.661334] scsi2 : ata_piix
[ 0.661387] scsi3 : ata_piix
[ 0.662242] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.662245] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.662292] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.662319] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 0.662329] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 0.662587] Fixed MDIO Bus: probed
[ 0.662616] PPP generic driver version 2.4.2
[ 0.662645] tun: Universal TUN/TAP device driver, 1.6
[ 0.662646] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.662711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.662725] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.662732] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.662735] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.662764] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.662801] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.666697] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.666708] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fffc00
[ 0.680012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.680141] hub 1-0:1.0: USB hub found
[ 0.680145] hub 1-0:1.0: 6 ports detected
[ 0.680232] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.680240] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.680242] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.680270] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.684045] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.687938] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.687948] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
[ 0.700012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.700134] hub 2-0:1.0: USB hub found
[ 0.700138] hub 2-0:1.0: 6 ports detected
[ 0.700224] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.700234] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.700249] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.700254] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.700256] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.700283] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.704046] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.704174] hub 3-0:1.0: USB hub found
[ 0.704178] hub 3-0:1.0: 2 ports detected
[ 0.704247] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.704251] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.704254] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.704283] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.704319] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.704416] hub 4-0:1.0: USB hub found
[ 0.704418] hub 4-0:1.0: 2 ports detected
[ 0.704471] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.704476] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.704478] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.704509] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.704538] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.704627] hub 5-0:1.0: USB hub found
[ 0.704630] hub 5-0:1.0: 2 ports detected
[ 0.704683] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.704688] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.704690] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.704717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.704746] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.704838] hub 6-0:1.0: USB hub found
[ 0.704840] hub 6-0:1.0: 2 ports detected
[ 0.704894] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.704898] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.704900] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.704929] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.704958] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.705049] hub 7-0:1.0: USB hub found
[ 0.705052] hub 7-0:1.0: 2 ports detected
[ 0.705105] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.705110] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.705112] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.705139] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.705168] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.705260] hub 8-0:1.0: USB hub found
[ 0.705262] hub 8-0:1.0: 2 ports detected
[ 0.705380] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.705382] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.705974] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.706052] mousedev: PS/2 mouse device common for all mice
[ 0.706154] rtc_cmos 00:03: RTC can wake from S4
[ 0.706198] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.706218] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.706278] device-mapper: uevent: version 1.0.3
[ 0.706338] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.706381] device-mapper: multipath: version 1.2.0 loaded
[ 0.706383] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.706435] EISA: Probing bus 0 at eisa.0
[ 0.706437] EISA: Cannot allocate resource for mainboard
[ 0.706438] Cannot allocate resource for EISA slot 1
[ 0.706440] Cannot allocate resource for EISA slot 2
[ 0.706441] Cannot allocate resource for EISA slot 3
[ 0.706442] Cannot allocate resource for EISA slot 4
[ 0.706444] Cannot allocate resource for EISA slot 5
[ 0.706445] Cannot allocate resource for EISA slot 6
[ 0.706446] Cannot allocate resource for EISA slot 7
[ 0.706447] Cannot allocate resource for EISA slot 8
[ 0.706448] EISA: Detected 0 cards.
[ 0.706490] cpuidle: using governor ladder
[ 0.706492] cpuidle: using governor menu
[ 0.706705] TCP cubic registered
[ 0.706803] NET: Registered protocol family 10
[ 0.707250] NET: Registered protocol family 17
[ 0.707261] Registering the dns_resolver key type
[ 0.707625] Using IPI No-Shortcut mode
[ 0.707688] PM: Hibernation image not present or could not be loaded.
[ 0.707698] registered taskstats version 1
[ 0.707950] Magic number: 3:724:137
[ 0.707956] block ram2: hash matches
[ 0.708018] rtc_cmos 00:03: setting system clock to 2011-11-11 17:08:19 UTC (1321031299)
[ 0.708020] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.708021] EDD information not available.
[ 0.724834] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.990537] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.001055] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.196011] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 1.248012] Refined TSC clocksource calibration: 3010.028 MHz.
[ 1.248017] Switching to clocksource tsc
[ 1.456054] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.456064] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.468049] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 1.468059] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.480303] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133
[ 1.480306] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.484110] ata2.01: ATAPI: Optiarc DVD RW AD-5200S, 1.09, max UDMA/100
[ 1.496282] ata1.00: configured for UDMA/133
[ 1.496399] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
[ 1.496551] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.496564] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.496608] sd 0:0:0:0: [sda] Write Protect is off
[ 1.496611] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.496647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.500112] ata2.01: configured for UDMA/100
[ 1.502625] scsi 1:0:1:0: CD-ROM Optiarc DVD RW AD-5200S 1.09 PQ: 0 ANSI: 5
[ 1.504610] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.504613] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.504711] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.504774] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 1.524986] sda: sda1 sda2 < sda5 >
[ 1.525248] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.525274] Freeing unused kernel memory: 700k freed
[ 1.525558] Write protecting the kernel text: 5192k
[ 1.525591] Write protecting the kernel read-only data: 2148k
[ 1.540901] <30>udev[74]: starting version 167
[ 1.599034] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.599060] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.607335] scsi4 : pata_marvell
[ 1.608890] scsi5 : pata_marvell
[ 1.608931] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.608932] ata6: DUMMY
[ 1.609961] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.609976] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.610007] r8169 0000:02:00.0: setting latency timer to 64
[ 1.610056] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.610450] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf8002000, 00:23:54:66:2e:0f, XID 1c4000c0 IRQ 44
[ 1.624334] Floppy drive(s): fd0 is 1.44M
[ 1.643664] FDC 0 is a post-1991 82077
[ 1.828530] ata5.00: HPA detected: current 78150744, native 156301488
[ 1.828535] ata5.00: ATA-6: ST380011A, 3.06, max UDMA/100
[ 1.828538] ata5.00: 78150744 sectors, multi 0: LBA48
[ 1.844528] ata5.00: configured for UDMA/100
[ 1.844619] scsi 4:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
[ 1.844751] sd 4:0:0:0: [sdb] 78150744 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.844786] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.844808] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.844812] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.844848] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.867057] sdb: sdb1 < sdb5 > sdb2
[ 1.867327] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.885187] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input3
[ 1.885264] generic-usb 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:1d.0-2/input0
[ 1.885275] usbcore: registered new interface driver usbhid
[ 1.885276] usbhid: USB HID core driver
[ 3.463935] vesafb: framebuffer at 0xf9000000, mapped to 0xf8100000, using 3072k, total 3072k
[ 3.463937] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 3.463939] vesafb: scrolling: redraw
[ 3.463940] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.464022] Console: switching to colour frame buffer device 128x48
[ 3.464039] fb0: VESA VGA frame buffer device
[ 3.651473] Btrfs loaded
[ 3.655191] xor: automatically using best checksumming function: pIII_sse
[ 3.672005] pIII_sse : 11284.000 MB/sec
[ 3.672007] xor: using function: pIII_sse (11284.000 MB/sec)
[ 3.673865] device-mapper: dm-raid45: initialized v0.2594b
[ 16.660587] end_request: I/O error, dev fd0, sector 0
[ 16.958884] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 34.507674] <30>udev[421]: starting version 167
[ 34.576718] Adding 3905532k swap on /dev/sdb5. Priority:-1 extents:1 across:3905532k
[ 34.621171] lp: driver loaded but no devices found
[ 34.652941] nvidia: module license 'NVIDIA' taints kernel.
[ 34.652944] Disabling lock debugging due to kernel taint
[ 34.689336] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 34.783937] Linux video capture interface: v2.00
[ 34.817083] IR NEC protocol handler initialized
[ 34.845824] cx2388x alsa driver version 0.0.8 loaded
[ 34.845853] cx88_audio 0000:05:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 34.847014] cx88[0]: subsystem: 1554:4949, board: Prolink Pixelview Global Extreme [card=74,insmod option], frontend(s): 0
[ 34.847016] cx88[0]: TV tuner type 71, Radio tuner type 0
[ 34.896677] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 34.955854] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 34.955890] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 34.955908] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 35.080367] i2c-core: driver [tuner] using legacy suspend method
[ 35.080368] i2c-core: driver [tuner] using legacy resume method
[ 35.093260] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[ 35.413673] IR RC5(x) protocol handler initialized
[ 35.422994] IR RC6 protocol handler initialized
[ 35.424506] IR JVC protocol handler initialized
[ 35.426119] IR Sony protocol handler initialized
[ 35.428688] lirc_dev: IR Remote Control driver registered, major 250
[ 35.429857] IR LIRC bridge handler initialized
[ 35.660949] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 35.660955] nvidia 0000:01:00.0: setting latency timer to 64
[ 35.660959] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 35.661031] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.06 Mon Apr 18 14:54:25 PDT 2011
[ 35.975948] xc2028 0-0061: creating new instance
[ 35.975951] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 35.975954] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
[ 36.128005] Registered IR keymap rc-pixelview-new
[ 36.128099] input: cx88 IR (Prolink Pixelview Glob as /devices/pci0000:00/0000:00:1e.0/0000:05:02.1/rc/rc0/input4
[ 36.128162] rc0: cx88 IR (Prolink Pixelview Glob as /devices/pci0000:00/0000:00:1e.0/0000:05:02.1/rc/rc0
[ 36.128189] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 36.128299] cx8800 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 36.128307] cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 18, latency: 64, mmio: 0xfc000000
[ 36.128344] cx88[0]/0: registered device video0 [v4l2]
[ 36.128372] cx88[0]/0: registered device vbi0
[ 36.128396] cx88[0]/0: registered device radio0
[ 36.287521] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 36.287569] cx88[0]: Calling XC2028/3028 callback
[ 36.386783] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[ 36.386786] cx88[0]: Calling XC2028/3028 callback
[ 36.836152] NET: Registered protocol family 15
[ 36.865514] padlock_sha: VIA PadLock Hash Engine not detected.
[ 36.890012] r8169 0000:02:00.0: eth0: link down
[ 36.890018] r8169 0000:02:00.0: eth0: link down
[ 36.897506] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.918296] padlock_sha: VIA PadLock Hash Engine not detected.
[ 36.979449] Intel AES-NI instructions are not detected.
[ 36.992796] padlock_aes: VIA PadLock not detected.
[ 37.904359] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700.
[ 37.928612] SCODE (20000000), id 000000000000b700:
[ 37.928615] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[ 37.936005] cx88[0]: Calling XC2028/3028 callback
[ 38.059713] cx88[0]: Calling XC2028/3028 callback
[ 38.159270] xc2028 0-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[ 38.159275] cx88[0]: Calling XC2028/3028 callback
[ 38.566593] r8169 0000:02:00.0: eth0: link up
[ 38.573996] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 39.606437] xc2028 0-0061: Loading firmware for type=FM (400), id 0000000000000000.
[ 39.627158] cx88[0]: Calling XC2028/3028 callback
[ 39.991492] ppdev: user-space parallel port driver
[ 40.427601] vboxdrv: Found 2 processor cores.
[ 40.427904] vboxdrv: fAsync=0 offMin=0x1e6 offMax=0xe7c
[ 40.428492] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 40.428494] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
[ 43.689606] NET: Registered protocol family 24
[ 44.096910] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,commit=0
[ 48.912007] eth0: no IPv6 routers present
[ 53.660332] end_request: I/O error, dev fd0, sector 0
[ 64.800406] cx88[0]: Calling XC2028/3028 callback
[ 64.899572] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 64.899576] cx88[0]: Calling XC2028/3028 callback
[ 65.840969] end_request: I/O error, dev fd0, sector 0
[ 66.342298] (0), id 00000000007f0000:
[ 66.342301] xc2028 0-0061: Loading firmware for type=(0), id 0000000000200000.
[ 66.363899] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000), id 0000000000200000.
[ 66.370303] cx88[0]: Calling XC2028/3028 callback
[ 66.883559] cx88[0]: Calling XC2028/3028 callback
[ 67.268740] cx88[0]: Calling XC2028/3028 callback
[ 84.655801] cx88[0]: Calling XC2028/3028 callback
[ 85.401432] cx88[0]: Calling XC2028/3028 callback
[ 85.934536] cx88[0]: Calling XC2028/3028 callback
[ 86.660330] cx88[0]: Calling XC2028/3028 callback
[ 87.374984] cx88[0]: Calling XC2028/3028 callback
[ 88.105238] cx88[0]: Calling XC2028/3028 callback
[ 88.590069] cx88[0]: Calling XC2028/3028 callback
[ 89.334031] cx88[0]: Calling XC2028/3028 callback
[ 90.082325] cx88[0]: Calling XC2028/3028 callback
[ 90.815465] cx88[0]: Calling XC2028/3028 callback
[ 91.530282] cx88[0]: Calling XC2028/3028 callback
[ 92.002687] cx88[0]: Calling XC2028/3028 callback
[ 92.573528] cx88[0]: Calling XC2028/3028 callback
[ 93.084989] cx88[0]: Calling XC2028/3028 callback
[ 93.546589] cx88[0]: Calling XC2028/3028 callback
[ 94.005970] cx88[0]: Calling XC2028/3028 callback
[ 94.589747] cx88[0]: Calling XC2028/3028 callback
[ 95.115140] cx88[0]: Calling XC2028/3028 callback
[ 95.661953] cx88[0]: Calling XC2028/3028 callback
[ 96.321462] cx88[0]: Calling XC2028/3028 callback
[ 96.782606] cx88[0]: Calling XC2028/3028 callback
[ 97.277692] cx88[0]: Calling XC2028/3028 callback
[ 97.770405] cx88[0]: Calling XC2028/3028 callback
[ 98.230162] cx88[0]: Calling XC2028/3028 callback
[ 98.772011] cx88[0]: Calling XC2028/3028 callback
[ 99.506084] cx88[0]: Calling XC2028/3028 callback
[ 100.208801] cx88[0]: Calling XC2028/3028 callback
[ 100.783734] cx88[0]: Calling XC2028/3028 callback
[ 101.341317] cx88[0]: Calling XC2028/3028 callback
[ 101.816991] cx88[0]: Calling XC2028/3028 callback
[ 102.306026] cx88[0]: Calling XC2028/3028 callback
[ 102.768523] cx88[0]: Calling XC2028/3028 callback
[ 103.553858] cx88[0]: Calling XC2028/3028 callback
[ 104.127899] cx88[0]: Calling XC2028/3028 callback
[ 104.763271] cx88[0]: Calling XC2028/3028 callback
[ 105.287052] cx88[0]: Calling XC2028/3028 callback
[ 105.745122] cx88[0]: Calling XC2028/3028 callback
[ 106.290522] cx88[0]: Calling XC2028/3028 callback
[ 106.859995] cx88[0]: Calling XC2028/3028 callback
[ 107.418205] cx88[0]: Calling XC2028/3028 callback
[ 107.878640] cx88[0]: Calling XC2028/3028 callback
[ 108.617138] cx88[0]: Calling XC2028/3028 callback
[ 109.222808] cx88[0]: Calling XC2028/3028 callback
[ 109.682768] cx88[0]: Calling XC2028/3028 callback
[ 110.140726] cx88[0]: Calling XC2028/3028 callback
[ 110.778101] cx88[0]: Calling XC2028/3028 callback
[ 111.501167] cx88[0]: Calling XC2028/3028 callback
[ 111.963376] cx88[0]: Calling XC2028/3028 callback
[ 112.420466] cx88[0]: Calling XC2028/3028 callback
[ 113.007332] cx88[0]: Calling XC2028/3028 callback
[ 113.554429] cx88[0]: Calling XC2028/3028 callback
[ 114.089181] cx88[0]: Calling XC2028/3028 callback
[ 114.825832] cx88[0]: Calling XC2028/3028 callback
[ 115.445493] cx88[0]: Calling XC2028/3028 callback
[ 115.966210] cx88[0]: Calling XC2028/3028 callback
[ 116.600704] cx88[0]: Calling XC2028/3028 callback
[ 117.065530] cx88[0]: Calling XC2028/3028 callback
[ 117.627577] cx88[0]: Calling XC2028/3028 callback
[ 118.382728] cx88[0]: Calling XC2028/3028 callback
[ 119.101829] cx88[0]: Calling XC2028/3028 callback
[ 119.580317] cx88[0]: Calling XC2028/3028 callback
[ 120.098697] cx88[0]: Calling XC2028/3028 callback
[ 120.843361] cx88[0]: Calling XC2028/3028 callback
[ 121.306127] cx88[0]: Calling XC2028/3028 callback
[ 121.945683] cx88[0]: Calling XC2028/3028 callback
[ 122.466456] cx88[0]: Calling XC2028/3028 callback
[ 123.275239] cx88[0]: Calling XC2028/3028 callback
[ 123.805071] cx88[0]: Calling XC2028/3028 callback
[ 124.356014] cx88[0]: Calling XC2028/3028 callback
[ 124.816456] cx88[0]: Calling XC2028/3028 callback
[ 125.400115] cx88[0]: Calling XC2028/3028 callback
[ 126.027268] cx88[0]: Calling XC2028/3028 callback
[ 126.570651] cx88[0]: Calling XC2028/3028 callback
[ 127.034168] cx88[0]: Calling XC2028/3028 callback
[ 127.586089] cx88[0]: Calling XC2028/3028 callback
[ 128.055745] cx88[0]: Calling XC2028/3028 callback
[ 128.721435] cx88[0]: Calling XC2028/3028 callback
[ 129.371018] cx88[0]: Calling XC2028/3028 callback
[ 129.834959] cx88[0]: Calling XC2028/3028 callback
[ 130.516406] cx88[0]: Calling XC2028/3028 callback
[ 131.144704] cx88[0]: Calling XC2028/3028 callback
[ 131.704257] cx88[0]: Calling XC2028/3028 callback
[ 132.171113] cx88[0]: Calling XC2028/3028 callback
[ 132.670898] cx88[0]: Calling XC2028/3028 callback
[ 133.373506] cx88[0]: Calling XC2028/3028 callback
[ 134.222641] cx88[0]: Calling XC2028/3028 callback
[ 134.843696] cx88[0]: Calling XC2028/3028 callback
[ 135.368009] cx88[0]: Calling XC2028/3028 callback
[ 135.996268] cx88[0]: Calling XC2028/3028 callback
[ 136.624173] cx88[0]: Calling XC2028/3028 callback
[ 137.150318] cx88[0]: Calling XC2028/3028 callback
[ 137.691814] cx88[0]: Calling XC2028/3028 callback
[ 138.278549] cx88[0]: Calling XC2028/3028 callback
[ 138.855089] cx88[0]: Calling XC2028/3028 callback
[ 139.532566] cx88[0]: Calling XC2028/3028 callback
[ 140.151816] cx88[0]: Calling XC2028/3028 callback
[ 140.636290] cx88[0]: Calling XC2028/3028 callback
[ 141.111993] cx88[0]: Calling XC2028/3028 callback
[ 141.706948] cx88[0]: Calling XC2028/3028 callback
[ 142.197983] cx88[0]: Calling XC2028/3028 callback
[ 142.681376] cx88[0]: Calling XC2028/3028 callback
[ 143.147932] cx88[0]: Calling XC2028/3028 callback
[ 143.611530] cx88[0]: Calling XC2028/3028 callback
[ 144.076538] cx88[0]: Calling XC2028/3028 callback
[ 144.694183] cx88[0]: Calling XC2028/3028 callback
[ 145.187080] cx88[0]: Calling XC2028/3028 callback
[ 145.768450] cx88[0]: Calling XC2028/3028 callback
[ 146.237348] cx88[0]: Calling XC2028/3028 callback
[ 146.781947] cx88[0]: Calling XC2028/3028 callback
[ 147.249188] cx88[0]: Calling XC2028/3028 callback
[ 147.862975] cx88[0]: Calling XC2028/3028 callback
[ 148.463567] cx88[0]: Calling XC2028/3028 callback
[ 148.943767] cx88[0]: Calling XC2028/3028 callback
[ 149.414588] cx88[0]: Calling XC2028/3028 callback
[ 149.888658] cx88[0]: Calling XC2028/3028 callback
[ 150.632418] cx88[0]: Calling XC2028/3028 callback
[ 151.382987] cx88[0]: Calling XC2028/3028 callback
[ 166.040650] cx88[0]: Calling XC2028/3028 callback
[ 167.255165] cx88[0]: Calling XC2028/3028 callback
[ 168.479403] cx88[0]: Calling XC2028/3028 callback
[ 197.964642] cx88[0]: Calling XC2028/3028 callback
[ 199.343791] cx88[0]: Calling XC2028/3028 callback
[ 201.362943] cx88[0]: Calling XC2028/3028 callback
[ 202.919829] cx88[0]: Calling XC2028/3028 callback
[ 205.047574] cx88[0]: Calling XC2028/3028 callback
[ 207.437625] cx88[0]: Calling XC2028/3028 callback
[ 248.372411] cx88[0]: Calling XC2028/3028 callback
[ 248.471574] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 248.471580] cx88[0]: Calling XC2028/3028 callback
[ 249.910430] (0), id 00000000007f0000:
[ 249.910433] xc2028 0-0061: Loading firmware for type=(0), id 0000000000200000.
[ 249.932053] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000), id 0000000000200000.
[ 249.938472] cx88[0]: Calling XC2028/3028 callback
[ 250.323574] cx88[0]: Calling XC2028/3028 callback
[ 250.623216] cx88[0]: Calling XC2028/3028 callback
[ 320.979659] cx88[0]: Calling XC2028/3028 callback
[ 321.402018] cx88[0]: Calling XC2028/3028 callback
[ 331.015329] cx88[0]: Calling XC2028/3028 callback
[ 332.916224] cx88[0]: Calling XC2028/3028 callback
[ 333.766819] cx88[0]: Calling XC2028/3028 callback
[ 335.655727] cx88[0]: Calling XC2028/3028 callback
[ 336.229272] cx88[0]: Calling XC2028/3028 callback
[ 337.154457] cx88[0]: Calling XC2028/3028 callback
[ 354.083395] cx88[0]: Calling XC2028/3028 callback
[ 355.482618] cx88[0]: Calling XC2028/3028 callback
[ 356.335573] cx88[0]: Calling XC2028/3028 callback
[ 356.623329] cx88[0]: Calling XC2028/3028 callback
[ 397.462029] cx88[0]: Calling XC2028/3028 callback
[ 414.920825] cx88[0]: Calling XC2028/3028 callback
[ 486.500158] cx88[0]: Calling XC2028/3028 callback
[ 570.392410] cx88[0]: Calling XC2028/3028 callback
[ 570.491968] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 570.491974] cx88[0]: Calling XC2028/3028 callback
[ 571.914373] (0), id 00000000007f0000:
[ 571.914376] xc2028 0-0061: Loading firmware for type=(0), id 0000000000200000.
[ 571.936027] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000), id 0000000000200000.
[ 571.942420] cx88[0]: Calling XC2028/3028 callback
[ 572.335581] cx88[0]: Calling XC2028/3028 callback
[ 572.639844] cx88[0]: Calling XC2028/3028 callback
[ 591.312410] cx88[0]: Calling XC2028/3028 callback
[ 591.411876] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 591.411882] cx88[0]: Calling XC2028/3028 callback
[ 592.850386] (0), id 00000000007f0000:
[ 592.850389] xc2028 0-0061: Loading firmware for type=(0), id 0000000000200000.
[ 592.872359] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000), id 0000000000200000.
[ 592.878757] cx88[0]: Calling XC2028/3028 callback
[ 593.275572] cx88[0]: Calling XC2028/3028 callback
[ 593.581085] cx88[0]: Calling XC2028/3028 callback
[/console]

#204651

А
[console]lsmod[/console]
(полностью, под спойлер)

#204655
Показать
[console]k1890@k1890-System-Product-Name ~ $ lsmod
Module Size Used by
pppoe 17476 2
pppox 13158 1 pppoe
binfmt_misc 13213 1
vboxnetadp 13323 0
vboxnetflt 27855 0
vboxdrv 219250 2 vboxnetadp,vboxnetflt
parport_pc 32111 0
ppdev 12849 0
dm_crypt 22463 0
deflate 12581 0
ctr 12949 0
twofish_generic 16579 0
twofish_i586 12503 0
twofish_common 20823 2 twofish_generic,twofish_i586
camellia 29212 0
serpent 29029 0
blowfish 16674 0
cast5 24976 0
des_generic 21191 0
cryptd 19801 0
aes_i586 16956 0
aes_generic 38023 1 aes_i586
xcbc 12711 0
rmd160 16664 0
sha512_generic 16780 0
sha256_generic 20911 0
sha1_generic 12591 0
crypto_null 12782 0
af_key 31464 0
rc_pixelview_new 12472 0
tuner_xc2028 26609 1
ir_lirc_codec 12770 0
lirc_dev 18720 1 ir_lirc_codec
ir_sony_decoder 12493 0
ir_jvc_decoder 12490 0
ir_rc6_decoder 12490 0
ir_rc5_decoder 12490 0
nvidia 9766978 122
snd_hda_codec_via 56765 1
tuner 26802 1
snd_hda_intel 24113 2
snd_hda_codec 90901 2 snd_hda_codec_via,snd_hda_intel
snd_hwdep 13274 1 snd_hda_codec
snd_seq_midi 13132 0
snd_rawmidi 25269 1 snd_seq_midi
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event
cx8800 33381 1
cx88_alsa 13797 1
snd_pcm 80042 3 snd_hda_intel,snd_hda_codec,cx88_alsa
snd_timer 28659 2 snd_seq,snd_pcm
cx88xx 78563 2 cx8800,cx88_alsa
ir_nec_decoder 12490 0
snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq
rc_core 25760 9 rc_pixelview_new,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,cx88xx
i2c_algo_bit 13184 1 cx88xx
tveeprom 17009 1 cx88xx
asus_atk0110 17664 0
v4l2_common 16757 3 tuner,cx8800,cx88xx
videobuf_dma_sg 18747 3 cx8800,cx88_alsa,cx88xx
snd 55295 16 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_seq,cx88_alsa,snd_pcm,snd_timer,snd_seq_device
videodev 75143 5 tuner,cx8800,cx88xx,v4l2_common
videobuf_core 25193 3 cx8800,cx88xx,videobuf_dma_sg
btcx_risc 13400 3 cx8800,cx88_alsa,cx88xx
soundcore 12600 1 snd
snd_page_alloc 14073 2 snd_hda_intel,snd_pcm
lp 13349 0
parport 36746 3 parport_pc,ppdev,lp
dm_raid45 88410 0
xor 21860 1 dm_raid45
btrfs 527388 0
zlib_deflate 26594 2 deflate,btrfs
libcrc32c 12543 1 btrfs
vesafb 13449 1
usbhid 41704 0
hid 77084 1 usbhid
floppy 60032 0
r8169 42534 0
pata_marvell 12756 2
[/console]
#204657

K1890
А показывает лучше на какой card?

#204662

На card=74 показывает немного лучше.

#204671
K1890 написал:
На card=74 показывает немного лучше.

Может быть, нужно еще указать опцию tuner=
Почитайте еще:
http://www.vivaolinux.com.br/dica/PixelView-PlayTV-MPEG2-no-Ubuntu-Linux-8.04-configurando-corretamente
http://hamacker.wordpress.com/2008/05/29/colocando-uma-pixelview-playtv-mpeg2-para-funcionar-no-ubuntu
PS Не отчаивайтесь, я в свое время тоже долго ковырялся с тюнерами, но в итоге все вышло :)

#204985
K1890 написал:

Мда... Понять бы тут хоть что нибудь...

http://translate.google.ru/ - С языка: "Определить язык" - "Перевести". Читайте и пробуйте. У меня просто нет такой железки, испытывать варианты не могу
PS Вы бы видели, как я пытался настроить свой AverMedia 305 на ядре 2.4.х :)

#204996
mvt написал:
PS Вы бы видели, как я пытался настроить свой AverMedia 305 на ядре 2.4.х

Я свой GoTView PCI 2 DVD Lite тоже очень долго пытался завести, даже плюнул, но потом, года через два, кто то из виндовых дров вынул фирмварник для тюнера, "завёл" я его, правда не очень то он и нужен стал. Сейчас вот есть HTPC Thermaltake , вот руки не дойдут до него ни как.

#249184

И так. Снова на днях установил Linux Mint Росинка. И снова пытаюсь настроить тюнер.
Создал файл
/etc/modprobe.d/local
с содержанием :

options bttv card=74 tuner=28 radio=1
options tuner secam=dk
не хочет показывать TVtime. Даже нет пункта меню "сканировать". Пробовал ставить значение card=66 - то же самое. Так же пробовал убрать tuner=28 radio=1, но так же ничего это не дало. Выхлоп команды dmesg :

Показать
[ 0.231651] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.231654] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.231656] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.231658] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.231660] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.231765] pnp: PnP ACPI: found 17 devices
[ 0.231766] ACPI: ACPI bus type pnp unregistered
[ 0.231769] PnPBIOS: Disabled by ACPI PNP
[ 0.267711] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.267715] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.267718] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.267721] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.267723] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.267726] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbdfffff]
[ 0.267728] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.267732] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.267734] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.267738] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.267741] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 0.267746] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.267748] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.267752] pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.267755] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.267760] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.267762] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.267766] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.267770] pci 0000:00:1c.5: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref]
[ 0.267775] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.267776] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.267780] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfdffffff]
[ 0.267783] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.267805] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.267808] pci 0000:00:01.0: setting latency timer to 64
[ 0.267813] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.267818] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.267821] pci 0000:00:1c.0: setting latency timer to 64
[ 0.267826] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.267829] pci 0000:00:1c.4: setting latency timer to 64
[ 0.267834] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.267837] pci 0000:00:1c.5: setting latency timer to 64
[ 0.267842] pci 0000:00:1e.0: setting latency timer to 64
[ 0.267845] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.267847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.267849] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.267851] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.267852] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff]
[ 0.267854] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.267856] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbdfffff]
[ 0.267858] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.267860] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.267861] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.267863] pci_bus 0000:04: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[ 0.267865] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.267867] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.267869] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.267871] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.267872] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.267874] pci_bus 0000:02: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref]
[ 0.267876] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.267878] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.267880] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.267881] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.267883] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.267885] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff]
[ 0.267915] NET: Registered protocol family 2
[ 0.267971] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.268151] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.268489] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.268669] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.268670] TCP reno registered
[ 0.268672] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.268679] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.268740] NET: Registered protocol family 1
[ 0.268871] pci 0000:01:00.0: Boot video device
[ 0.268881] PCI: CLS 32 bytes, default 64
[ 0.269029] cpufreq-nforce2: No nForce2 chipset.
[ 0.269125] audit: initializing netlink socket (disabled)
[ 0.269131] type=2000 audit(1335852534.264:1): initialized
[ 0.276013] highmem bounce pool size: 64 pages
[ 0.276017] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.277392] VFS: Disk quotas dquot_6.5.2
[ 0.277437] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.277934] fuse init (API version 7.16)
[ 0.278004] msgmni has been set to 1641
[ 0.278177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.278196] io scheduler noop registered
[ 0.278198] io scheduler deadline registered
[ 0.278208] io scheduler cfq registered (default)
[ 0.278294] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.278318] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.278357] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.278387] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.278435] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.278465] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.278512] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.278541] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.278607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.278625] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.278680] intel_idle: MWAIT substates: 0x22220
[ 0.278681] intel_idle: does not run on family 6 model 23
[ 0.278757] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.278761] ACPI: Power Button [PWRB]
[ 0.278798] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.278800] ACPI: Power Button [PWRF]
[ 0.278938] ACPI: acpi_idle registered with cpuidle
[ 0.280160] ERST: Table is not found!
[ 0.280206] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.300530] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.300605] isapnp: Scanning for PnP cards...
[ 0.466419] Freeing initrd memory: 18056k freed
[ 0.653380] isapnp: No Plug & Play device found
[ 0.677647] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.677904] Linux agpgart interface v0.103
[ 0.679024] brd: module loaded
[ 0.679488] loop: module loaded
[ 0.679555] i2c-core: driver [adp5520] using legacy suspend method
[ 0.679556] i2c-core: driver [adp5520] using legacy resume method
[ 0.679640] ata_piix 0000:00:1f.2: version 2.13
[ 0.679660] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.679664] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.679704] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.679965] scsi0 : ata_piix
[ 0.680048] scsi1 : ata_piix
[ 0.681114] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.681118] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.681138] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.681143] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.681176] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.681347] scsi2 : ata_piix
[ 0.681398] scsi3 : ata_piix
[ 0.682342] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.682345] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.682392] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.682420] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 0.682429] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 0.682687] Fixed MDIO Bus: probed
[ 0.682715] PPP generic driver version 2.4.2
[ 0.682746] tun: Universal TUN/TAP device driver, 1.6
[ 0.682747] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.682813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.682828] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.682835] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.682838] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.682864] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.682901] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.686794] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.686805] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fffc00
[ 0.700012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.700142] hub 1-0:1.0: USB hub found
[ 0.700146] hub 1-0:1.0: 6 ports detected
[ 0.700235] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.700242] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.700245] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.700273] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.704042] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.707911] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.707922] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
[ 0.720012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.720149] hub 2-0:1.0: USB hub found
[ 0.720154] hub 2-0:1.0: 6 ports detected
[ 0.720235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.720245] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.720261] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.720265] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.720268] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.720293] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.724044] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.724176] hub 3-0:1.0: USB hub found
[ 0.724181] hub 3-0:1.0: 2 ports detected
[ 0.724248] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.724252] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.724255] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.724284] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.724319] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.724413] hub 4-0:1.0: USB hub found
[ 0.724416] hub 4-0:1.0: 2 ports detected
[ 0.724469] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.724473] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.724476] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.724502] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.724532] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.724622] hub 5-0:1.0: USB hub found
[ 0.724624] hub 5-0:1.0: 2 ports detected
[ 0.724676] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.724681] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.724684] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.724711] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.724740] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.724834] hub 6-0:1.0: USB hub found
[ 0.724837] hub 6-0:1.0: 2 ports detected
[ 0.724889] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.724893] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.724895] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.724924] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.724953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.725046] hub 7-0:1.0: USB hub found
[ 0.725048] hub 7-0:1.0: 2 ports detected
[ 0.725101] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.725105] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.725108] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.725135] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.725163] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.725254] hub 8-0:1.0: USB hub found
[ 0.725256] hub 8-0:1.0: 2 ports detected
[ 0.725373] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.725374] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.725866] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.725941] mousedev: PS/2 mouse device common for all mice
[ 0.726042] rtc_cmos 00:03: RTC can wake from S4
[ 0.726084] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.726104] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.726164] device-mapper: uevent: version 1.0.3
[ 0.726224] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.726266] device-mapper: multipath: version 1.2.0 loaded
[ 0.726268] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.726320] EISA: Probing bus 0 at eisa.0
[ 0.726322] EISA: Cannot allocate resource for mainboard
[ 0.726324] Cannot allocate resource for EISA slot 1
[ 0.726325] Cannot allocate resource for EISA slot 2
[ 0.726326] Cannot allocate resource for EISA slot 3
[ 0.726328] Cannot allocate resource for EISA slot 4
[ 0.726329] Cannot allocate resource for EISA slot 5
[ 0.726330] Cannot allocate resource for EISA slot 6
[ 0.726332] Cannot allocate resource for EISA slot 7
[ 0.726333] Cannot allocate resource for EISA slot 8
[ 0.726334] EISA: Detected 0 cards.
[ 0.726375] cpuidle: using governor ladder
[ 0.726376] cpuidle: using governor menu
[ 0.726590] TCP cubic registered
[ 0.726688] NET: Registered protocol family 10
[ 0.727128] NET: Registered protocol family 17
[ 0.727139] Registering the dns_resolver key type
[ 0.727510] Using IPI No-Shortcut mode
[ 0.727573] PM: Hibernation image not present or could not be loaded.
[ 0.727582] registered taskstats version 1
[ 0.727834] Magic number: 12:764:113
[ 0.727894] rtc_cmos 00:03: setting system clock to 2012-05-01 06:08:55 UTC (1335852535)
[ 0.727896] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.727898] EDD information not available.
[ 0.744727] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.010531] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.164041] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.172120] ata3.00: ATAPI: Optiarc DVD RW AD-5200S, 1.09, max UDMA/100
[ 1.188116] ata3.00: configured for UDMA/100
[ 1.216011] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 1.268014] Refined TSC clocksource calibration: 3010.028 MHz.
[ 1.268018] Switching to clocksource tsc
[ 1.476053] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.476064] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.484053] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.484063] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.492225] ata1.00: HPA detected: current 488395055, native 488397168
[ 1.492228] ata1.00: ATA-7: ST3250310AS, 3.AAA, max UDMA/133
[ 1.492230] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.500320] ata2.00: ATA-8: Hitachi HDT721010SLA360, ST6OA3AA, max UDMA/133
[ 1.500323] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.508242] ata1.00: configured for UDMA/133
[ 1.508326] scsi 0:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5
[ 1.508429] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
[ 1.508444] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.508467] sd 0:0:0:0: [sda] Write Protect is off
[ 1.508469] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.508488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.516285] ata2.00: configured for UDMA/133
[ 1.516371] scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
[ 1.516484] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.516515] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.516533] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.516536] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.516558] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.518194] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-5200S 1.09 PQ: 0 ANSI: 5
[ 1.520637] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.520640] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.520744] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.520803] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 1.527074] sda: sda1 sda2 < sda5 sda6 >
[ 1.527364] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.546584] sdb: sdb1 sdb2 < sdb5 >
[ 1.546823] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.546848] Freeing unused kernel memory: 700k freed
[ 1.547133] Write protecting the kernel text: 5192k
[ 1.547166] Write protecting the kernel read-only data: 2148k
[ 1.564538] <30>udev[73]: starting version 167
[ 1.639767] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.639790] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.642456] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.642466] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.642493] r8169 0000:02:00.0: setting latency timer to 64
[ 1.642541] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.642920] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf8002000, 00:23:54:66:2e:0f, XID 1c4000c0 IRQ 44
[ 1.648835] Floppy drive(s): fd0 is 1.44M
[ 1.664877] scsi4 : pata_marvell
[ 1.667667] FDC 0 is a post-1991 82077
[ 1.667805] scsi5 : pata_marvell
[ 1.667842] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.667844] ata6: DUMMY
[ 1.683404] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3
[ 1.683484] generic-usb 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:1d.1-1/input0
[ 1.683496] usbcore: registered new interface driver usbhid
[ 1.683497] usbhid: USB HID core driver
[ 2.060010] Btrfs loaded
[ 2.064189] xor: automatically using best checksumming function: pIII_sse
[ 2.084003] pIII_sse : 11429.000 MB/sec
[ 2.084005] xor: using function: pIII_sse (11429.000 MB/sec)
[ 2.085856] device-mapper: dm-raid45: initialized v0.2594b
[ 14.880482] end_request: I/O error, dev fd0, sector 0
[ 15.042342] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 24.912376] <30>udev[388]: starting version 167
[ 24.945491] Adding 4370428k swap on /dev/sda6. Priority:-1 extents:1 across:4370428k
[ 24.963654] lp: driver loaded but no devices found
[ 25.071018] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 25.095807] nvidia: module license 'NVIDIA' taints kernel.
[ 25.095810] Disabling lock debugging due to kernel taint
[ 25.273062] Linux video capture interface: v2.00
[ 25.288341] IR NEC protocol handler initialized
[ 25.289481] IR RC5(x) protocol handler initialized
[ 25.292868] IR RC6 protocol handler initialized
[ 25.299781] IR JVC protocol handler initialized
[ 25.300970] IR Sony protocol handler initialized
[ 25.302919] lirc_dev: IR Remote Control driver registered, major 250
[ 25.303899] IR LIRC bridge handler initialized
[ 25.341833] cx2388x alsa driver version 0.0.8 loaded
[ 25.341861] cx88_audio 0000:05:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 25.343035] cx88[0]: Your board isn't known (yet) to the driver. You can
[ 25.343036] cx88[0]: try to pick one of the existing card configs via
[ 25.343037] cx88[0]: card=<n> insmod option. Updating to the latest
[ 25.343038] cx88[0]: version might help as well.
[ 25.343046] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 25.343049] cx88[0]: card=0 -> UNKNOWN/GENERIC
[ 25.343051] cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
[ 25.343054] cx88[0]: card=2 -> GDI Black Gold
[ 25.343056] cx88[0]: card=3 -> PixelView
[ 25.343058] cx88[0]: card=4 -> ATI TV Wonder Pro
[ 25.343062] cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
[ 25.343065] cx88[0]: card=6 -> AverTV Studio 303 (M126)
[ 25.343068] cx88[0]: card=7 -> MSI TV-@nywhere Master
[ 25.343071] cx88[0]: card=8 -> Leadtek Winfast DV2000
[ 25.343073] cx88[0]: card=9 -> Leadtek PVR 2000
[ 25.343076] cx88[0]: card=10 -> IODATA GV-VCP3/PCI
[ 25.343079] cx88[0]: card=11 -> Prolink PlayTV PVR
[ 25.343082] cx88[0]: card=12 -> ASUS PVR-416
[ 25.343085] cx88[0]: card=13 -> MSI TV-@nywhere
[ 25.343087] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
[ 25.343090] cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
[ 25.343093] cx88[0]: card=16 -> KWorld LTV883RF
[ 25.343096] cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
[ 25.343099] cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
[ 25.343102] cx88[0]: card=19 -> Conexant DVB-T reference design
[ 25.343105] cx88[0]: card=20 -> Provideo PV259
[ 25.343108] cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
[ 25.343111] cx88[0]: card=22 -> pcHDTV HD3000 HDTV
[ 25.343114] cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
[ 25.343117] cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[ 25.343120] cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[ 25.343124] cx88[0]: card=26 -> IODATA GV/BCTV7E
[ 25.343127] cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[ 25.343131] cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
[ 25.343134] cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
[ 25.343137] cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
[ 25.343140] cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
[ 25.343143] cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
[ 25.343146] cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
[ 25.343149] cx88[0]: card=34 -> ATI HDTV Wonder
[ 25.343152] cx88[0]: card=35 -> WinFast DTV1000-T
[ 25.343155] cx88[0]: card=36 -> AVerTV 303 (M126)
[ 25.343158] cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S
[ 25.343160] cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S
[ 25.343163] cx88[0]: card=39 -> KWorld DVB-S 100
[ 25.343166] cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[ 25.343170] cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[ 25.343174] cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro
[ 25.343177] cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702
[ 25.343180] cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[ 25.343183] cx88[0]: card=45 -> KWorld HardwareMpegTV XPert
[ 25.343186] cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid
[ 25.343189] cx88[0]: card=47 -> pcHDTV HD5500 HDTV
[ 25.343192] cx88[0]: card=48 -> Kworld MCE 200 Deluxe
[ 25.343195] cx88[0]: card=49 -> PixelView PlayTV P7000
[ 25.343198] cx88[0]: card=50 -> NPG Tech Real TV FM Top 10
[ 25.343201] cx88[0]: card=51 -> WinFast DTV2000 H
[ 25.343204] cx88[0]: card=52 -> Geniatech DVB-S
[ 25.343207] cx88[0]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[ 25.343211] cx88[0]: card=54 -> Norwood Micro TV Tuner
[ 25.343214] cx88[0]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[ 25.343218] cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[ 25.343222] cx88[0]: card=57 -> ADS Tech Instant Video PCI
[ 25.343225] cx88[0]: card=58 -> Pinnacle PCTV HD 800i
[ 25.343228] cx88[0]: card=59 -> DViCO FusionHDTV 5 PCI nano
[ 25.343231] cx88[0]: card=60 -> Pinnacle Hybrid PCTV
[ 25.343234] cx88[0]: card=61 -> Leadtek TV2000 XP Global
[ 25.343237] cx88[0]: card=62 -> PowerColor RA330
[ 25.343240] cx88[0]: card=63 -> Geniatech X8000-MT DVBT
[ 25.343243] cx88[0]: card=64 -> DViCO FusionHDTV DVB-T PRO
[ 25.343246] cx88[0]: card=65 -> DViCO FusionHDTV 7 Gold
[ 25.343249] cx88[0]: card=66 -> Prolink Pixelview MPEG 8000GT
[ 25.343252] cx88[0]: card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120)
[ 25.343255] cx88[0]: card=68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid
[ 25.343258] cx88[0]: card=69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2
[ 25.343262] cx88[0]: card=70 -> TeVii S460 DVB-S/S2
[ 25.343265] cx88[0]: card=71 -> Omicom SS4 DVB-S/S2 PCI
[ 25.343268] cx88[0]: card=72 -> TBS 8920 DVB-S/S2
[ 25.343270] cx88[0]: card=73 -> TeVii S420 DVB-S
[ 25.343273] cx88[0]: card=74 -> Prolink Pixelview Global Extreme
[ 25.343276] cx88[0]: card=75 -> PROF 7300 DVB-S/S2
[ 25.343279] cx88[0]: card=76 -> SATTRADE ST4200 DVB-S/S2
[ 25.343282] cx88[0]: card=77 -> TBS 8910 DVB-S
[ 25.343285] cx88[0]: card=78 -> Prof 6200 DVB-S
[ 25.343288] cx88[0]: card=79 -> Terratec Cinergy HT PCI MKII
[ 25.343291] cx88[0]: card=80 -> Hauppauge WinTV-IR Only
[ 25.343294] cx88[0]: card=81 -> Leadtek WinFast DTV1800 Hybrid
[ 25.343297] cx88[0]: card=82 -> WinFast DTV2000 H rev. J
[ 25.343300] cx88[0]: card=83 -> Prof 7301 DVB-S/S2
[ 25.343302] cx88[0]: card=84 -> Samsung SMT 7020 DVB-S
[ 25.343305] cx88[0]: card=85 -> Twinhan VP-1027 DVB-S
[ 25.343309] cx88[0]: subsystem: 1554:4949, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0
[ 25.343311] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 25.374841] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 25.374875] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 25.374895] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 25.470040] i2c-core: driver [tuner] using legacy suspend method
[ 25.470042] i2c-core: driver [tuner] using legacy resume method
[ 25.476723] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[ 25.517192] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 26.020314] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.020321] nvidia 0000:01:00.0: setting latency timer to 64
[ 26.020325] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 26.021776] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.06 Mon Apr 18 14:54:25 PDT 2011
[ 26.040286] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 26.040312] cx8800 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 26.040319] cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 18, latency: 64, mmio: 0xfc000000
[ 26.040416] cx88[0]/0: registered device video0 [v4l2]
[ 26.040483] cx88[0]/0: registered device vbi0
[ 26.040498] tuner 0-0061: tuner type not set
[ 26.336658] r8169 0000:02:00.0: eth0: link down
[ 26.336663] r8169 0000:02:00.0: eth0: link down
[ 26.336851] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.576366] vesafb: framebuffer at 0xf9000000, mapped to 0xf8400000, using 1216k, total 1216k
[ 26.576369] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 26.576370] vesafb: scrolling: redraw
[ 26.576372] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 26.576468] Console: switching to colour frame buffer device 80x30
[ 26.583916] fb0: VESA VGA frame buffer device
[ 26.605046] ppdev: user-space parallel port driver
[ 28.034384] r8169 0000:02:00.0: eth0: link up
[ 28.070115] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.865716] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 29.786948] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 33.096919] NET: Registered protocol family 24
[ 38.416005] eth0: no IPv6 routers present
[ 45.536496] end_request: I/O error, dev fd0, sector 0
[ 57.700495] end_request: I/O error, dev fd0, sector 0
[ 65.463064] tuner 0-0061: tuner type not set
[ 65.679392] tuner 0-0061: tuner type not set
[ 72.439176] tuner 0-0061: tuner type not set
[ 73.479123] tuner 0-0061: tuner type not set
[ 74.314437] tuner 0-0061: tuner type not set
[ 76.434333] tuner 0-0061: tuner type not set
[ 104.390669] NetworkManager[860]: segfault at 20 ip 080bea64 sp bfe81960 error 4 in NetworkManager[8048000+a5000]
#249190

Покажите:
lspci -vnn

#249201
aliaksei1818 написал:
Покажите:
lspci -vnn

Вот:

Показать
k@k-System-Product-Name ~ $ lspci -vnn
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-fbdfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at f7fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:8346]
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c03fffff
Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f6e00000-00000000f6efffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f7fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fc000000-fdffffff
Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at a000 [size=8]
I/O ports at 9c00 [size=4]
I/O ports at 9880 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9480 [size=16]
I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: medium devsel, IRQ 15
Memory at f7fff400 (64-bit, non-prefetchable) [size=256]
I/O ports at 0400 [size=32]
Kernel modules: i2c-i801

00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at b000 [size=8]
I/O ports at ac00 [size=4]
I/O ports at a880 [size=8]
I/O ports at a800 [size=4]
I/O ports at a480 [size=16]
I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: nVidia Corporation GT200 [GeForce GTX 260] [10de:05e2] (rev a1) (prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at cc00 [size=128]
[virtual] Expansion ROM at fbd80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8367]
Flags: bus master, fast devsel, latency 0, IRQ 44
I/O ports at d800 [size=256]
Memory at f6eff000 (64-bit, prefetchable) [size=4K]
Memory at f6ee0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbef0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e0]
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at ec00 [size=8]
I/O ports at e880 [size=4]
I/O ports at e800 [size=8]
I/O ports at e480 [size=4]
I/O ports at e400 [size=16]
Memory at fbfffc00 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
Kernel modules: pata_marvell

05:02.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: PROLINK Microsystems Corp Device [1554:4949]
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800

05:02.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)
Subsystem: PROLINK Microsystems Corp Device [1554:4949]
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx88_audio
Kernel modules: cx88-alsa

#249209

К сожалению порадовать нечем.

05:02.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: PROLINK Microsystems Corp Device [1554:4949]
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800

Нету в списке CARDLIST.cx88 поддержки данного чипа. Поэтому в выхлопе dmesg сыпется:

text
[   25.343309] cx88[0]: subsystem: 1554:4949, board: UNKNOWN/GENERIC [card=0,autodetected], frontend(s): 0:

Остается только это:

text
If your card is listed as "board: UNKNOWN/GENERIC" it is unknown to
the driver.  What to do then?

(1) Try upgrading to the latest snapshot, maybe it has been added meanwhile. (2) You can try to create a new entry yourself, have a look at cx88-cards.c. If that worked, mail me your changes as unified diff ("diff -u"). (3) Or you can mail me the config information. I need at least the following informations to add the card:

* the PCI Subsystem ID ("0070:3400" from the line above, "lspci -v" output is fine too). * the tuner type used by the card. You can try to find one by trial-and-error using the tuner=<n> insmod option. If you know which one the card has you can also have a look at the list in CARDLIST.tuner

#249219

/

#249229
"aliaksei1818" написал:
Остается только это:

А как мне попытаться это сделать?

#249272
K1890 написал:
А как мне попытаться это сделать?

Вы сами не сможете сделать. Да и смыла в этом нет - уж больно кажется, что linux установлен с целью поиграться и выкинуть.
Но, а в целом продолжайте играться с параметром card. Хоть и в списке CARDLIST.cx88 поддержки данной карточки нет - это не исключает возможность подходящих параметров cx88-cards.c.
Вот Вы писали ранее, что со значением card=66, что-то показывает. Так и пробуйте с этим значением.
+

K1890 написал:
Создал файл
/etc/modprobe.d/local
с содержанием :
options bttv card=74 tuner=28 radio=1
options tuner secam=dk

Модуль bttv здесь с какого боку? Ясно же написано:

05:02.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: PROLINK Microsystems Corp Device [1554:4949]
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800

Вот и используйте соответствующий модуль, т.е. cx88xx.
Почему именно он?
Модуль cx8800 не поддерживает параметр card, но данный параметр есть у модуля cx88xx, который выступает в роли зависимости модулем cx8800.
По поводу звука - это отдельная тема.
Во-первых у вас есть возможность использовать DMA звук за счет модуля cx88-alsa:

05:02.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8801] (rev 05)

Во-вторых вам необходимо определить устройство по умолчанию для вывода звука. Поэтому сначала смотрим:
cat /proc/asound/cards
В-третьих, если используется pulseaudio, то возможно необходимо еще перенаправить звук из устройства ввода по умолчанию для устройства вывода по умолчанию, за счет модуля module-loopback
+
Доп. информация:
http://www.mythtv.org/wiki/PCI_TV_audio
http://linuxtv.org/wiki/index.php/Cx88_devices_(cx2388x)

Войдите или зарегистрируйтесь, чтобы ответить.