[Решено] Radeon HD 2400XT: не стартуют иксы

...[ 1076.991] (II) Primary Device is: PCI 01@00:00:0
[ 1076.992] drmOpenDevice: node name is /dev/dri/card0
[ 1076.993] drmOpenDevice: open result is 11, (OK)
[ 1076.994] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 1076.994] drmOpenDevice: node name is /dev/dri/card0
[ 1076.994] drmOpenDevice: open result is 11, (OK)
[ 1076.994] drmOpenByBusid: drmOpenMinor returns 11
[ 1076.994] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 1076.995] (II) [DRM] Kernel mode setting disabled
[ 1076.995] (EE) KMS is disabled. This is good for us, because RADEONHD conflicts with KMS.
[ 1076.995] (==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
[ 1076.995] (**) RADEONHD(0): Selected EXA 2D acceleration.
[ 1076.995] (II) RADEONHD(0): Card not in database: 0x94C8:0x1025:0x012B; using generic modesetting.
[ 1076.995] If - and only if - your card does not work or does not work optimally
please contact radeonhd@opensuse.org to help rectify this.
Use the subject: 0x94C8:0x1025:0x012B: <name of board>
and *please* describe the problems you are seeing
in your message.
[ 1076.995] (--) RADEONHD(0): Detected an M74 on an unidentified card
[ 1076.995] (II) RADEONHD(0): Mapped IO @ 0xfc000000 to 0xb723e000 (size 0x00010000)
[ 1076.996] (II) RADEONHD(0): PCIE Card Detected
[ 1076.996] (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
[ 1076.996] (II) RADEONHD(0): ATOM BIOS Rom:
[ 1076.996] SubsystemVendorID: 0x1002 SubsystemID: 0x94c8
[ 1076.996] IOBaseAddress: 0x2000
[ 1076.996] Filename: BR26045.bin
[ 1076.996] BIOS Bootup Message:

Wistron/Acer MXM M74M GDDR2 256MB 300e/400m...

...[ 1077.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1077.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1077.861] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1077.861] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 1077.861] (EE) No input driver/identifier specified (ignoring)
[ 1077.862] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event3)
[ 1077.862] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1077.862] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1077.862] (II) Synaptics touchpad driver version 1.2.2
[ 1077.862] (**) Option "Device" "/dev/input/event3"
[ 1077.874] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 1077.874] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 1077.874] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1077.874] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 1077.874] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 1077.874] (**) Option "HorizScrollDelta" "0"
[ 1077.885] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1077.885] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1077.889] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 1077.889] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1077.889] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 1077.889] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1077.889] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1077.897] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1077.897] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 1077.897] (EE) No input driver/identifier specified (ignoring)
[ 1077.898] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 1077.898] (EE) No input driver/identifier specified (ignoring)
[ 1080.223] (II) Power Button: Close
[ 1080.223] (II) UnloadModule: "evdev"
[ 1080.227] (II) Video Bus: Close
[ 1080.227] (II) UnloadModule: "evdev"
[ 1080.231] (II) Sleep Button: Close
[ 1080.231] (II) UnloadModule: "evdev"
[ 1080.235] (II) Acer Crystal Eye webcam: Close
[ 1080.235] (II) UnloadModule: "evdev"
[ 1080.240] (II) A4Tech USB Mouse: Close
[ 1080.240] (II) UnloadModule: "evdev"
[ 1080.240] (II) AT Translated Set 2 keyboard: Close
[ 1080.240] (II) UnloadModule: "evdev"
[ 1080.251] (II) UnloadModule: "synaptics"
[ 1080.261] (II) UnloadModule: "synaptics"
[ 1080.272] (II) RADEONHD(0): Attempting to disable power management
[ 1080.272] (II) RADEONHD(0): Attempting to set Engine Clock to 297000
[ 1080.273] (II) RADEONHD(0): Current Engine Clock: 297000
[ 1080.273] (II) RADEONHD(0): Current Memory Clock: 396000
[ 1080.273] (II) RADEONHD(0): Current Chip Voltage: 0

[ 801.813] (II) ATI Proprietary Linux Driver Version Identifier:8.76.7
[ 801.813] (II) ATI Proprietary Linux Driver Release Identifier: 8.762
[ 801.813] (II) ATI Proprietary Linux Driver Build Date: Aug 3 2010 21:16:01
[ 801.814] (--) using VT number 7

[ 801.848] (II) Primary Device is: PCI 01@00:00:0
[ 801.848] (WW) Falling back to old probe method for fglrx
[ 801.858] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 801.859] (--) Chipset Supported AMD Graphics Processor (0x94C8) found
[ 801.860] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 801.860] (II) AMD Video driver is signed
[ 801.861] (II) fglrx(0): pEnt->device->identifier=0x8251da0
[ 801.861] (II) fglrx(0): === [atiddxPreInit] === begin
[ 801.861] (II) Loading sub module "vgahw"
[ 801.861] (II) LoadModule: "vgahw"
[ 801.862] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 801.862] (II) Module vgahw: vendor="X.Org Foundation"
[ 801.862] compiled for 1.8.0, module version = 0.1.0
[ 801.862] ABI class: X.Org Video Driver, version 7.0
[ 801.862] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 801.862] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 801.862] (==) fglrx(0): Default visual is TrueColor
[ 801.862] (**) fglrx(0): Option "DPMS" "true"
[ 801.862] (==) fglrx(0): RGB weight 888
[ 801.862] (II) fglrx(0): Using 8 bits per RGB
[ 801.862] (==) fglrx(0): Buffer Tiling is ON
[ 801.862] (II) Loading sub module "fglrxdrm"
[ 801.862] (II) LoadModule: "fglrxdrm"
[ 801.863] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 801.865] ukiDynamicMajor: failed to open /proc/ati/major
[ 801.865] ukiDynamicMajor: failed to open /proc/ati/major
[ 801.865] (==) fglrx(0): NoAccel = NO
[ 801.865] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 801.865] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2400 XT" (Chipset = 0x94c8)
[ 801.865] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x012b)
[ 801.865] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 801.865] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 801.865] (--) fglrx(0): MMIO registers at 0xfc000000
[ 801.865] (--) fglrx(0): I/O port at 0x00002000
[ 801.865] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 801.869] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 801.869] (EE) fglrx(0): Hasn't established DRM connection
[ 801.869] (II) Loading sub module "vbe"
[ 801.869] (II) LoadModule: "vbe"
[ 801.870] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 801.870] (II) Module vbe: vendor="X.Org Foundation"
[ 801.870] compiled for 1.8.0, module version = 1.1.0
[ 801.870] ABI class: X.Org Video Driver, version 7.0
[ 801.871] (II) fglrx(0): VESA BIOS detected
[ 801.871] (II) fglrx(0): VESA VBE Version 3.0
[ 801.871] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 801.871] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 801.871] (II) fglrx(0): VESA VBE OEM Software Rev: 10.60
[ 801.871] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologieule version = 1.0.0
[ 801.907] ABI class: X.Org ANSI C Emulation, version 0.4
[ 801.907] (II) Loading sub module "ddc"
[ 801.907] (II) LoadModule: "ddc"
[ 801.907] (II) Module "ddc" already built-in
[ 802.078] (II) Loading sub module "ddc"
[ 802.078] (II) LoadModule: "ddc"
[ 802.078] (II) Module "ddc" already built-in
s Inc.
[ 801.871] (II) fglrx(0): VESA VBE OEM Product: M74
[ 801.871] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 801.906] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 801.906] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 801.906] (II) fglrx(0): PCIE card detected
[ 801.906] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 801.906] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 801.906] (EE) fglrx(0): Hasn't established DRM connection
[ 801.906] (WW) fglrx(0): Hasn't establisted DRM connection
[ 801.906] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 801.906] (WW) fglrx(0): No DRM connection for driver fglrx.
[ 801.906] (II) fglrx(0): RandR 1.2 support is enabled!
[ 801.906] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 801.906] (==) fglrx(0): Center Mode is disabled
[ 801.906] (II) Loading sub module "fb"
[ 801.906] (II) LoadModule: "fb"
[ 801.907] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 801.907] (II) Module fb: vendor="X.Org Foundation"
[ 801.907] compiled for 1.8.0, module version = 1.0.0
[ 801.907] ABI class: X.Org ANSI C Emulation, version 0.4
[ 801.907] (II) Loading sub module "ddc"
[ 801.907] (II) LoadModule: "ddc"
[ 801.907] (II) Module "ddc" already built-in
[ 802.078] (II) Loading sub module "ddc"
[ 802.078] (II) LoadModule: "ddc"
[ 802.078] (II) Module "ddc" already built-in
[ 802.078] (II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
[ 802.078] (II) fglrx(0): Display0 EDID data ---------------------------
[ 802.078] (II) fglrx(0): Manufacturer: AUO Model: 4444 Serial#: 0
: Hasn't established DRM connection
[ 801.906] (WW) fglrx(0): Hasn't establisted DRM connection
[ 801.906] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 801.906] (WW) fglrx(0): No DRM connection for driver fglrx.
[ 801.906] (II) fglrx(0): RandR 1.2 support is enabled!
[ 801.906] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 801.906] (==) fglrx(0): Center Mode is disabled
[ 801.906] (II) Loading sub module "fb"
[ 801.906] (II) LoadModule: "fb"
[ 801.907] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 801.907] (II) Module fb: vendor="X.Org Foundation"
[ 801.907] compiled for 1.8.0, module version = 1.0.0
[ 801.907] ABI class: X.Org ANSI C Emulation, version 0.4
[ 801.907] (II) Loading sub module "ddc"
[ 801.907] (II) LoadModule: "ddc"
[ 801.907] (II) Module "ddc" already built-in
[ 802.078] (II) Loading sub module "ddc"
[ 802.078] (II) LoadModule: "ddc"
[ 802.078] (II) Module "ddc" already built-in
[ 802.078] (II) fglrx(0): Year: 2006 Week: 1
[ 802.078] (II) fglrx(0): EDID Version: 1.3
: Hasn't established DRM connection
[ 801.906] (WW) fglrx(0): Hasn't establisted DRM connection
[ 801.906] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 801.906] (WW) fglrx(0): No DRM connection for driver fglrx.
[ 801.906] (II) fglrx(0): RandR 1.2 support is enabled!
[ 801.906] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 801.906] (==) fglrx(0): Center Mode is disabled
[ 801.906] (II) Loading sub module "fb"
[ 801.906] (II) LoadModule: "fb"
[ 801.907] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 801.907] (II) Module fb: vendor="X.Org Foundation"
[ 801.907] compiled for 1.8.0, module version = 1.0.0
[ 801.907] ABI class: X.Org ANSI C Emulation, version 0.4
[ 801.907] (II) Loading sub module "ddc"
[ 801.907] (II) LoadModule: "ddc"
[ 801.907] (II) Module "ddc" already built-in
[ 802.078] (II) Loading sub module "ddc"
[ 802.078] (II) LoadModule: "ddc"
[ 802.078] (II) Module "ddc" already built-in
[ 802.078] (II) fglrx(0): Digital Display Input
[ 802.078] (II) fglrx(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 802.078] (II) fglrx(0): Gamma: 2.20
[ 802.078] (II) fglrx(0): No DPMS capabilities specified
[ 802.078] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 802.078] (II) fglrx(0): First detailed timing is preferred mode
[ 802.078] (II) fglrx(0): redX: 0.575 redY: 0.335 greenX: 0.315 greenY: 0.550
[ 802.078] (II) fglrx(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
[ 802.078] (II) fglrx(0): Manufacturer's mask: 0
[ 802.078] (II) fglrx(0): Supported detailed timing:
[ 802.078] (II) fglrx(0): clock: 68.9 MHz Image Size: 304 x 190 mm
[ 802.078] (II) fglrx(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 802.078] (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 808 v_blanking: 816 v_border: 0
[ 802.078] (II) fglrx(0): Unknown vendor-specific block f
[ 802.078] (II) fglrx(0): AUO
[ 802.078] (II) fglrx(0): B141EW04 V4
[ 802.078] (II) fglrx(0): EDID (in hex):
[ 802.078] (II) fglrx(0): 00ffffffffffff0006af444400000000
[ 802.078] (II) fglrx(0): 01100103801e13780a7fe59355508c27
[ 802.078] (II) fglrx(0): 22505400000001010101010101010101
[ 802.078] (II) fglrx(0): 010101010101ee1a0080502010301520
[ 802.078] (II) fglrx(0): 350030be100000180000000f00000000
[ 802.078] (II) fglrx(0): 00000000000000000020000000fe0041
[ 802.079] (II) fglrx(0): 554f0a202020202020202020000000fe
[ 802.079] (II) fglrx(0): 004231343145573034205634200a00be
[ 802.079] (II) fglrx(0): End of Display0 EDID data --------------------
[ 802.079] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 802.079] (II) fglrx(0): Output DFP1 has no monitor section
[ 802.079] (II) fglrx(0): Output CRT1 has no monitor section
[ 802.079] (II) fglrx(0): Output TV has no monitor section
[ 802.164] (II) fglrx(0): EDID vendor "AUO", prod id 17476
[ 802.164] (II) fglrx(0): Printing DDC gathered Modelines:
[ 802.164] (II) fglrx(0): Modeline "1280x800"x0.0 68.94 1280 1301 1333 1408 800 803 808 816 -hsync -vsync (49.0 kHz)
[ 802.164] (II) fglrx(0): Output LVDS connected
[ 802.164] (II) fglrx(0): Output DFP1 disconnected
[ 802.164] (II) fglrx(0): Output CRT1 disconnected
[ 802.164] (II) fglrx(0): Output TV disconnected
[ 802.164] (II) fglrx(0): Using exact sizes for initial modes
[ 802.164] (II) fglrx(0): Output LVDS using initial mode 1280x800
[ 802.164] (II) fglrx(0): Display dimensions: (300, 190) mm
[ 802.164] (II) fglrx(0): DPI set to (108, 106)
[ 802.164] (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
[ 802.164] (II) fglrx(0): Adapter ATI Mobility Radeon HD 2400 XT has 2 configurable heads and 1 displays connected.
[ 802.164] (==) fglrx(0): QBS disabled
[ 802.165] (==) fglrx(0): PseudoColor visuals disabled
[ 802.165] (II) Loading sub module "ramdac"
[ 802.165] (II) LoadModule: "ramdac"
[ 802.165] (II) Module "ramdac" already built-in
[ 802.165] (==) fglrx(0): NoDRI = NO
[ 802.165] (==) fglrx(0): Capabilities: 0x00000000
[ 802.165] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 802.165] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 802.165] (==) fglrx(0): UseFastTLS=0
[ 802.165] (==) fglrx(0): BlockSignalsOnLock=1
[ 802.165] (--) Depth 24 pixmap format is 32 bpp
[ 802.165] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
[ 802.165] (WW) fglrx(0): ***********************************************
[ 802.165] (WW) fglrx(0): * DRI initialization failed! *
[ 802.165] (WW) fglrx(0): * (maybe driver kernel module missing or bad) *
[ 802.165] (WW) fglrx(0): * 2D acceleraton available (MMIO) *
[ 802.165] (WW) fglrx(0): * no 3D acceleration available *
[ 802.165] (WW) fglrx(0): ***********************************************
[ 802.165] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
[ 802.210] (II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
[ 802.210] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
[ 802.210] (II) fglrx(0): Largest offscreen area available: 1600 x 6591
[ 802.210] (==) fglrx(0): Backing store disabled
[ 802.210] (II) Loading extension FGLRXEXTENSION
[ 802.210] (**) fglrx(0): DPMS enabled
[ 802.210] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 802.210] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 802.211] (II) LoadModule: "glesx"
[ 802.211] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 802.213] (II) Module glesx: vendor="X.Org Foundation"
[ 802.213] compiled for 1.7.1, module version = 1.0.0
[ 802.213] (II) Loading extension GLESX
[ 802.213] (II) fglrx(0): GLESX enableFlags = 512
[ 802.213] (II) fglrx(0): Acceleration enabled
[ 802.213] (II) LoadModule: "amdxmm"
[ 802.214] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 802.214] (II) Module amdxmm: vendor="X.Org Foundation"
[ 802.214] compiled for 1.7.1, module version = 1.0.0
[ 802.214] (EE) fglrx(0): XMM failed to open CMMQS connection.
[ 802.214] (II) fglrx(0): XMM failed to initialize!
[ 802.214] (II) fglrx(0): Enable composite support successfully
[ 802.214] (WW) fglrx(0): Option "VendorName" is not used
[ 802.214] (WW) fglrx(0): Option "ModelName" is not used
[ 802.214] (==) fglrx(0): Silken mouse enabled
[ 802.214] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 802.214] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 802.214] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 802.214] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 802.218] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 802.218] (II) fglrx(0): Cannot set TV horizontal size.
[ 802.218] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 802.218] (II) fglrx(0): Cannot set TV horizontal position.
[ 802.218] (II) fglrx(0): Cannot set TV vertical position.
[ 802.437]
Backtrace:
[ 802.437] 0: X (xorg_backtrace+0x37) [0x80986d7]
[ 802.437] 1: X (0x8048000+0x4e3fa) [0x80963fa]
[ 802.437] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xffffe40c]
[ 802.437] 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xilTilingSetSurface+0x4e) [0xb6b0a46e]
[ 802.438] 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxDisplayScrnInit+0x1d7) [0xb6afac17]
[ 802.438] 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxScreenInit+0x933) [0xb6ad3293]
[ 802.438] 6: X (AddScreen+0x17d) [0x80904dd]
[ 802.438] Floating point exception at address 0xb6b0a46e
[ 802.438]
Fatal server error:
[ 802.438] Caught signal 8 (Floating point exception). Server aborting
[ 802.438]
[ 802.438]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 802.438] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 802.438]
[ 802.636] (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.

Add the ATI repository (replace 11.3 with your version):
zypper ar -f http://www2.ati.com/suse/11.3 ati

Install the packages for HD 2000 and later:
zypper in x11-video-fglrxG02

Install the packages for Radeon 9500 - X1900 (11.1 and 11.2 only)
zypper in x11-video-fglrxG01

Reboot.