Вылезает ошибка при закрытии (иногда во время работы) Konqueror и Dolphin : " Executable: kdeinit4 PID: 6793 Signal: 6 (Aborted)."
Подскажите как исправить.
opensuse 11.2 kde-4.3.5
LinuxForum.Fans
Ошибка при закрытии Konqueror и Dolphin
Автор: alex8529
11 сообщений
3468 просмотров
alex8529
На обоих приложениях одна и та же ошибка??
Konqueror и Dolphin
etc/var/log ползём сюда ищем логи и смотрим, что там написано, по возможности выкладываем сюда.
анализатор сбоев вот что пишет:
text
Application: Konqueror (kdeinit4), signal: Aborted
[KCrash Handler]
#7 0xffffe430 in __kernel_vsyscall ()
#8 0xb60010cf in raise () from /lib/libc.so.6
#9 0xb60029e7 in abort () from /lib/libc.so.6
#10 0xb603d4ed in ?? () from /lib/libc.so.6
#11 0xb604350b in ?? () from /lib/libc.so.6
#12 0xb6048049 in free () from /lib/libc.so.6
#13 0xb61f0f4f in operator delete(void*) () from /usr/lib/libstdc++.so.6
#14 0xb00b30f5 in DolphinCategoryDrawer::~DolphinCategoryDrawer() () from /usr/lib/libdolphinprivate.so.4
#15 0xb00a86fc in DolphinIconsView::~DolphinIconsView() () from /usr/lib/libdolphinprivate.so.4
#16 0xb6e6135c in QObjectPrivate::deleteChildren (this=0x83f5bb0) at kernel/qobject.cpp:1986
#17 0xb63c8340 in QWidget::~QWidget (this=0x83da620, __in_chrg=<value optimized out>) at kernel/qwidget.cpp:1476
#18 0xb00b7b19 in DolphinView::~DolphinView() () from /usr/lib/libdolphinprivate.so.4
#19 0xb50cb5fa in KParts::Part::~Part() () from /usr/lib/libkparts.so.4
#20 0xb50cbe0c in KParts::ReadOnlyPart::~ReadOnlyPart() () from /usr/lib/libkparts.so.4
#21 0xb0114dcd in ?? () from /usr/lib/kde4/dolphinpart.so
#22 0xb2fdb77f in KConfigGroup::writeEntry(QString const&, QStringList const&, QFlags<KConfigBase::WriteConfigFlag>) () from /usr/lib/libkdeinit4_konqueror.so
#23 0xb2fe0ff3 in KConfigGroup::writeEntry(QString const&, QStringList const&, QFlags<KConfigBase::WriteConfigFlag>) () from /usr/lib/libkdeinit4_konqueror.so
#24 0xb3041a11 in KConfigGroup::writeEntry(QString const&, QStringList const&, QFlags<KConfigBase::WriteConfigFlag>) () from /usr/lib/libkdeinit4_konqueror.so
#25 0xb3042115 in KConfigGroup::writeEntry(QString const&, QStringList const&, QFlags<KConfigBase::WriteConfigFlag>) () from /usr/lib/libkdeinit4_konqueror.so
#26 0xb7657265 in KMainWindow::closeEvent(QCloseEvent*) () from /usr/lib/libkdeui.so.5
#27 0xb3032987 in KConfigGroup::writeEntry(QString const&, QStringList const&, QFlags<KConfigBase::WriteConfigFlag>) () from /usr/lib/libkdeinit4_konqueror.so
#28 0xb63c0abd in QWidget::event (this=0x8199468, event=0xbfa48668) at kernel/qwidget.cpp:8202
#29 0xb67ed484 in QMainWindow::event (this=0x8199468, event=0xbfa48668) at widgets/qmainwindow.cpp:1414
#30 0xb76552d4 in KMainWindow::event(QEvent*) () from /usr/lib/libkdeui.so.5
#31 0xb769ec42 in KXmlGuiWindow::event(QEvent*) () from /usr/lib/libkdeui.so.5
#32 0xb3042043 in KConfigGroup::writeEntry(QString const&, QStringList const&, QFlags<KConfigBase::WriteConfigFlag>) () from /usr/lib/libkdeinit4_konqueror.so
#33 0xb635fe3c in QApplicationPrivate::notify_helper (this=0x80aeb78, receiver=0x8199468, e=0xbfa48668) at kernel/qapplication.cpp:4302
#34 0xb6366d08 in QApplication::notify (this=0x8199468, receiver=0x8199468, e=0xbfa48668) at kernel/qapplication.cpp:4267
#35 0xb755d201 in KApplication::notify(QObject*, QEvent*) () from /usr/lib/libkdeui.so.5
#36 0xb6e5171e in QCoreApplication::notifyInternal (this=0xbfa48e4c, receiver=0x8199468, event=0xbfa48668) at kernel/qcoreapplication.cpp:726
#37 0xb63c60cd in sendSpontaneousEvent (event=<value optimized out>, receiver=<value optimized out>) at ../../src/corelib/kernel/qcoreapplication.h:218
#38 QWidgetPrivate::close_helper (event=<value optimized out>, receiver=<value optimized out>) at kernel/qwidget.cpp:7606
#39 0xb63e3663 in translateCloseEvent (this=0xbfa48e4c) at kernel/qapplication_x11.cpp:5298
#40 QApplication::x11ClientMessage (this=0xbfa48e4c) at kernel/qapplication_x11.cpp:3049
#41 0xb63f2e8b in QApplication::x11ProcessEvent (this=0xbfa48e4c, event=0xbfa48a5c) at kernel/qapplication_x11.cpp:3645
#42 0xb64210e8 in x11EventSourceDispatch (s=0x80b1c70, callback=0, user_data=0x0) at kernel/qguieventdispatcher_glib.cpp:146
#43 0xb5bc74c2 in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#44 0xb5bcad98 in ?? () from /usr/lib/libglib-2.0.so.0
#45 0xb5bcaebe in g_main_context_iteration () from /usr/lib/libglib-2.0.so.0
#46 0xb6e7e381 in QEventDispatcherGlib::processEvents (this=0x80aeb58, flags=...) at kernel/qeventdispatcher_glib.cpp:412
#47 0xb6420c3a in QGuiEventDispatcherGlib::processEvents (this=0x80aeb58, flags=...) at kernel/qguieventdispatcher_glib.cpp:204
#48 0xb6e4fd8d in QEventLoop::processEvents (this=0xbfa48d14, flags=) at kernel/qeventloop.cpp:149
#49 0xb6e501d9 in QEventLoop::exec (this=0xbfa48d14, flags=...) at kernel/qeventloop.cpp:201
#50 0xb6e55480 in QCoreApplication::exec () at kernel/qcoreapplication.cpp:1003
#51 0xb635fee4 in QApplication::exec () at kernel/qapplication.cpp:3581
#52 0xb30733a3 in kdemain () from /usr/lib/libkdeinit4_konqueror.so
#53 0x0804ea77 in _start ()Прошу, оформляйте правильно темы, используйте функции форума.
alex8529,
Мне анализатор сбоев ни чего не сказал, смотрите логи.
Вывод команды
text
dmesgпри зависании приведите.
dmesg
text
enabled
[ 1.942506] EXT4-fs: file extents enabled
[ 1.944602] EXT4-fs: mballoc enabled
[ 1.944618] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 3.274544] preloadtrace: systemtap: 0.9.9/0.142, base: f8482000, memory: 34496+77436+22160+13600 data+text+ctx+net, probes: 34
[ 4.185458] udev: starting version 146
[ 4.211234] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 4.211255] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[ 4.220555] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.220612] ACPI: Power Button [PWRF]
[ 4.220693] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 4.220718] ACPI: Power Button [PWRB]
[ 4.244767] scsi 2:0:0:0: Attached scsi generic sg0 type 5
[ 4.244800] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4.257752] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.266399] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.287225] Floppy drive(s): fd0 is 1.44M
[ 4.295089] parport_pc 00:08: reported by Plug and Play ACPI
[ 4.295137] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 4.302542] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 4.302958] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 4.302964] alloc irq_desc for 19 on node -1
[ 4.302967] alloc kstat_irqs on node -1
[ 4.302978] via-rhine 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 4.308557] eth0: VIA Rhine III at 0xf9fffc00, 00:26:5a:7c:35:6f, IRQ 19.
[ 4.309268] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 4.316048] FDC 0 is a post-1991 82077
[ 4.370279] eth0 renamed to eth2 by udevd [400]
[ 4.370677] udev: renamed network interface eth0 to eth2
[ 4.377087] gameport: EMU10K1 is pci0000:01:01.1/gameport0, io 0xd480, speed 1217kHz
[ 4.416175] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.416181] Uniform CD-ROM driver Revision: 3.20
[ 4.416303] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.439745] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 4.439752] alloc irq_desc for 18 on node -1
[ 4.439754] alloc kstat_irqs on node -1
[ 4.439766] EMU10K1_Audigy 0000:01:01.0: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18
[ 4.473360] ppdev: user-space parallel port driver
[ 4.990114] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
[ 5.233635] device-mapper: uevent: version 1.0.3
[ 5.233829] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 5.556480] loop: module loaded
[ 5.577269] EXT4-fs (sda3): barriers enabled
[ 5.609833] kjournald2 starting: pid 698, dev sda3:8, commit interval 5 seconds
[ 5.610201] EXT4-fs (sda3): internal journal on sda3:8
[ 5.610206] EXT4-fs (sda3): delayed allocation enabled
[ 5.610210] EXT4-fs: file extents enabled
[ 5.631096] EXT4-fs: mballoc enabled
[ 5.631117] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 5.735543] fuse init (API version 7.12)
[ 10.182461] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (2 cpu cores) (version 2.20.00)
[ 10.182529] powernow-k8: 0 : fid 0xf (2300 MHz), vid 0xa
[ 10.182534] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xb
[ 10.182539] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xd
[ 10.182544] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xf
[ 10.182549] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 11.574141] eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 11.623421] NET: Registered protocol family 17
[ 12.001026] Clocksource tsc unstable (delta = -199825906 ns)
[ 20.624088] NET: Registered protocol family 10
[ 20.624612] lo: Disabled Privacy Extensions
[ 21.734043] /dev/vmmon[2599]: Module vmmon: registered with major=10 minor=165
[ 21.734078] /dev/vmmon[2599]: Initial HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0
[ 21.734093] /dev/vmmon[2599]: HV check: anyNotCapable=0 anyUnlocked=1 anyEnabled=1 anyDisabled=0
[ 21.734101] /dev/vmmon[2599]: Module vmmon: initialized
[ 21.757272] /dev/vmci[2607]: VMCI: Driver initialized.
[ 21.757406] /dev/vmci[2607]: Module vmci: registered with major=10 minor=59
[ 21.757413] /dev/vmci[2607]: Module vmci: initialized
[ 22.249662] /dev/vmnet: open called by PID 2670 (vmnet-bridge)
[ 22.249684] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 22.249741] /dev/vmnet: port on hub 0 successfully opened
[ 22.249781] bridge-eth2: up
[ 22.249789] bridge-eth2: attached
[ 23.710090] /dev/vmnet: open called by PID 2725 (vmnet-dhcpd)
[ 23.710119] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 23.710180] /dev/vmnet: port on hub 1 successfully opened
[ 23.715969] /dev/vmnet: open called by PID 2727 (vmnet-netifup)
[ 23.716059] /dev/vmnet: port on hub 1 successfully opened
[ 23.846291] /dev/vmnet: open called by PID 2731 (vmnet-dhcpd)
[ 23.846315] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 23.846386] /dev/vmnet: port on hub 8 successfully opened
[ 23.860550] /dev/vmnet: open called by PID 2764 (vmnet-natd)
[ 23.860583] /dev/vmnet: port on hub 8 successfully opened
[ 23.868140] /dev/vmnet: open called by PID 2766 (vmnet-netifup)
[ 23.868174] /dev/vmnet: port on hub 8 successfully opened
[ 25.632428] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 27.403623] bootsplash: status on console 0 changed to on
[ 30.745015] eth2: no IPv6 routers present
[ 33.848016] vmnet1: no IPv6 routers present
[ 34.416008] vmnet8: no IPv6 routers present
[ 73.012737] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 73.054969] ISO 9660 Extensions: RRIP_1991A
[ 289.972438] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 290.106787] usb 1-3: New USB device found, idVendor=0951, idProduct=160e
[ 290.106806] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 290.106819] usb 1-3: Product: DataTraveler 2.0
[ 290.106828] usb 1-3: Manufacturer: Kingston
[ 290.106837] usb 1-3: SerialNumber: 200801250000000000002471
[ 290.107090] usb 1-3: configuration #1 chosen from 1 choice
[ 290.155974] Initializing USB Mass Storage driver...
[ 290.191784] scsi8 : SCSI emulation for USB Mass Storage devices
[ 290.192129] usbcore: registered new interface driver usb-storage
[ 290.192143] USB Mass Storage support registered.
[ 290.194276] usb-storage: device found at 3
[ 290.194283] usb-storage: waiting for device to settle before scanning
[ 291.195570] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 291.195966] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 291.199882] usb-storage: device scan complete
[ 291.200675] sd 8:0:0:0: [sdb] 7856128 512-byte logical blocks: (4.02 GB/3.74 GiB)
[ 291.202296] sd 8:0:0:0: [sdb] Write Protect is off
[ 291.202321] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 291.202327] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 291.206683] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 291.206712] sdb: sdb1
[ 291.285299] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 291.285318] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 2039.225872] npviewer.bin[5518]: segfault at 13 ip b6642e87 sp bfd21404 error 4 in libflashplayer.so[b5f66000+994000]
[ 2122.019282] npviewer.bin[6008]: segfault at ff999ea8 ip ff999ea8 sp bf8d3f7c error 4
[ 4842.862061] usb 1-3: USB disconnect, address 3
[ 6845.230336] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6915.916242] npviewer.bin[6042]: segfault at ff999ea8 ip ff999ea8 sp bf8b5fbc error 4Почти получилось, но всё равно подправил :P
alex8529,
Смотрите а вот она и ошибка:
text
npviewer.bin[5518]: segfault at 13 ip b6642e87 sp bfd21404 error 4 in libflashplayer.so[b5f66000+994000]После неё начинает всё валится.
Поясняю:
npviewer.bin - это обертка для ФЛЭША на 64х битных системах, когда не было Флэшплеера для 64, то использовали модуль от 32х завёрнутый как раз в npviewer.bin.
Но уже давно вышла версия Flashplayer для 64х битной системы. Вы давно обновляли систему и вообще как у Вас с этим обстоят дела? Может Вы чего не договариваете? валится когда просматриваете ролик?
система 32 бита, ни каких роликов не запущено, ошибка стала появлятся после утановки VLC при этом обновилась версия KDE
в konqueror вылетает ошибка когда при выходе открыта любая папка или корневой раздел, если пустое окно то нормально закрывается.
в dolphin всегда ошибка.
alex8529
этом обновилась версия KDE
Копайте в эту сторону, скорее всего у Вас либо не дообновлялось KDE, либо были установлены пакеты из непроверенных или тестовых репазитариев, что вызывает сбой системы. У Вас репазитарии типа factory имеют место быть подключенными?
alex8529этом обновилась версия KDE
Копайте в эту сторону, скорее всего у Вас либо не дообновлялось KDE, либо были установлены пакеты из непроверенных или тестовых репазитариев, что вызывает сбой системы. У Вас репазитарии типа factory имеют место быть подключенными?
да есть factory и unstable, похоже надо обновлять до 11,3 и не мучаться.
Спасибо step_slim за ответы.
тему можно закрывать.
alex8529
Вы сначала сообщите о решение проблемы, тогда и закроем, дела нужно доводить до логического завершения wink
Войдите или зарегистрируйтесь, чтобы ответить.
