проблема такая.
приобрел свежий ноут Acer EX2509 P3ZG со встроенным интелловским видео HD Graphics и предустановленной убунтой. ее снес и поставил свежую OpenSUSE 13.2 X86_64. ребутнулся ок, обновился, еще один нормальный ребут, без ошибок и т.п. поработал немного и при последующих ребутах одна и та же картина: с обычными параметрами загружаюсь - появляется зеленый бут-сплеш, висит 3-5 секунд и появляется черный экран. просто черный экран даже без всяких курсоров. кеды дальше не грузятся вообще. но если грузиться с параметрами Recovery Mode, то все ок, загрузка идет, ошибок не замечал.
видео вроде как корректно определилось как ValleyView Gen7. в /etc/sysconfig/ в DISPLAYMANAGER="kdm".
систему переустанавливал 3 раза. проблема сохраняется.
может кто помочь устранить проблему?
LinuxForum.Fans
Проблема с запуском. OpenSUSE 13.2 X86_64, KDE
Автор: bionet
22 сообщений
2420 просмотров
Вы обычным пользователем заходите, или root-ом?
когда прогружается recovery mode, то могу зайти и обычным пользователем. но вот стандартная загрузка у меня вообще не проходит. в этом-то и проблема. выше описано.
когда прогружается recovery mode, то могу зайти и обычным пользователем. но вот стандартная загрузка у меня вообще не проходит. в этом-то и проблема. выше описано.
в общем вот так это дело выглядит (видео):
обычная загрузка и стопор после нее http://youtu.be/cqJocViaIuk
загрузка в recovery mode http://youtu.be/8iRVjUcZgl0
Надо бы вывод Xorg.0.log выложить.
И покажите вывод lspci | grep -e VGA -e 3D
"Суть такова"
Где логи? Где лог иксов? Где десятая консоль во время чорного экрана?
Надо бы вывод Xorg.0.log выложить.
Показать
[ 18.153]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 18.153] X Protocol Version 11, Revision 0
[ 18.153] Build Operating System: openSUSE SUSE LINUX
[ 18.153] Current Operating System: Linux linux-rbvb 3.16.7-7-desktop #1 SMP PREEMPT Wed Dec 17 18:00:44 UTC 2014 (762f27a) x86_64
[ 18.153] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.7-7-desktop root=UUID=ef713aac-054f-4ac0-904f-46b70652e107 ro showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
[ 18.153] Build Date: 18 December 2014 02:06:21PM
[ 18.153]
[ 18.153] Current version of pixman: 0.32.6
[ 18.153] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.153] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.154] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 27 10:08:27 2015
[ 18.180] (==) Using config file: "/etc/X11/xorg.conf.install"
[ 18.180] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.180] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.181] (==) ServerLayout "Layout"
[ 18.181] (**) |-->Screen "vboxvideo" (0)
[ 18.181] (**) | |-->Monitor "<default monitor>"
[ 18.181] (**) | |-->Device "vboxvideo"
[ 18.181] (==) No monitor specified for screen "vboxvideo".
Using a default monitor configuration.
[ 18.181] (**) |-->Screen "vmware" (1)
[ 18.181] (**) | |-->Monitor "<default monitor>"
[ 18.182] (**) | |-->Device "vmware"
[ 18.182] (==) No monitor specified for screen "vmware".
Using a default monitor configuration.
[ 18.182] (**) |-->Screen "modesetting" (2)
[ 18.182] (**) | |-->Monitor "<default monitor>"
[ 18.182] (**) | |-->Device "modesetting"
[ 18.182] (==) No monitor specified for screen "modesetting".
Using a default monitor configuration.
[ 18.182] (**) |-->Screen "fbdev" (3)
[ 18.182] (**) | |-->Monitor "<default monitor>"
[ 18.182] (**) | |-->Device "fbdev"
[ 18.182] (==) No monitor specified for screen "fbdev".
Using a default monitor configuration.
[ 18.182] (**) |-->Screen "vesa" (4)
[ 18.182] (**) | |-->Monitor "<default monitor>"
[ 18.182] (**) | |-->Device "vesa"
[ 18.182] (==) No monitor specified for screen "vesa".
Using a default monitor configuration.
[ 18.182] (==) Automatically adding devices
[ 18.182] (==) Automatically enabling devices
[ 18.183] (==) Automatically adding GPU devices
[ 18.605] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 18.605] Entry deleted from font path.
[ 18.622] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 18.622] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 18.622] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.622] (II) Loader magic: 0x80ec60
[ 18.622] (II) Module ABI versions:
[ 18.622] X.Org ANSI C Emulation: 0.4
[ 18.622] X.Org Video Driver: 18.0
[ 18.622] X.Org XInput driver : 21.0
[ 18.622] X.Org Server Extension : 8.0
[ 18.623] (--) PCI:*(0:0:2:0) 8086:0f31:1025:0905 rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00002050/8
[ 18.623] (II) LoadModule: "glx"
[ 18.701] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 19.273] (II) Module glx: vendor="X.Org Foundation"
[ 19.273] compiled for 1.16.1, module version = 1.0.0
[ 19.273] ABI class: X.Org Server Extension, version 8.0
[ 19.273] (==) AIGLX enabled
[ 19.274] (II) LoadModule: "vboxvideo"
[ 19.274] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[ 19.301] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 19.301] compiled for 10.16.0, module version = 1.0.1
[ 19.301] Module class: X.Org Video Driver
[ 19.301] ABI class: X.Org Video Driver, version 18.0
[ 19.301] (**) Load address of symbol "VBOXVIDEO" is 0x7fc62790e3e0
[ 19.301] (II) LoadModule: "vmware"
[ 19.320] (WW) Warning, couldn't open module vmware
[ 19.320] (II) UnloadModule: "vmware"
[ 19.320] (II) Unloading vmware
[ 19.320] (EE) Failed to load module "vmware" (module does not exist, 0)
[ 19.320] (II) LoadModule: "modesetting"
[ 19.320] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 19.366] (II) Module modesetting: vendor="X.Org Foundation"
[ 19.366] compiled for 1.16.1, module version = 0.9.0
[ 19.366] Module class: X.Org Video Driver
[ 19.366] ABI class: X.Org Video Driver, version 18.0
[ 19.366] (II) LoadModule: "fbdev"
[ 19.366] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 19.490] (II) Module fbdev: vendor="X.Org Foundation"
[ 19.490] compiled for 1.16.1, module version = 0.4.4
[ 19.490] Module class: X.Org Video Driver
[ 19.490] ABI class: X.Org Video Driver, version 18.0
[ 19.490] (II) LoadModule: "vesa"
[ 19.491] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 19.791] (II) Module vesa: vendor="X.Org Foundation"
[ 19.791] compiled for 1.16.1, module version = 2.3.3
[ 19.791] Module class: X.Org Video Driver
[ 19.791] ABI class: X.Org Video Driver, version 18.0
[ 19.791] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 19.791] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 19.791] (II) FBDEV: driver for framebuffer: fbdev
[ 19.791] (II) VESA: driver for VESA chipsets: vesa
[ 19.791] (++) using VT number 7
[ 19.791] (EE) open /dev/dri/card0: No such file or directory
[ 19.791] (WW) Falling back to old probe method for modesetting
[ 19.791] (EE) open /dev/dri/card0: No such file or directory
[ 19.791] (II) Loading sub module "fbdevhw"
[ 19.791] (II) LoadModule: "fbdevhw"
[ 19.792] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 19.798] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 19.798] compiled for 1.16.1, module version = 0.0.2
[ 19.798] ABI class: X.Org Video Driver, version 18.0
[ 19.798] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 19.798] (II) FBDEV(1): using default device
[ 19.798] (WW) Falling back to old probe method for vesa
[ 19.798] (EE) Screen 0 deleted because of no matching config section.
[ 19.798] (II) UnloadModule: "modesetting"
[ 19.798] (II) FBDEV(0): Creating default Display subsection in Screen section
"fbdev" for depth/fbbpp 24/32
[ 19.798] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 19.798] (==) FBDEV(0): RGB weight 888
[ 19.798] (==) FBDEV(0): Default visual is TrueColor
[ 19.798] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.798] (II) FBDEV(0): hardware: EFI VGA (video memory: 4128kB)
[ 19.798] (II) FBDEV(0): checking modes against framebuffer device...
[ 19.798] (II) FBDEV(0): checking modes against monitor...
[ 19.798] (--) FBDEV(0): Virtual size is 1366x768 (pitch 1366)
[ 19.798] (**) FBDEV(0): Built-in mode "current": 104.9 MHz, 60.5 kHz, 76.4 Hz
[ 19.798] (II) FBDEV(0): Modeline "current"x0.0 104.92 1366 1398 1566 1734 768 772 776 792 -hsync -vsync -csync (60.5 kHz b)
[ 19.798] (==) FBDEV(0): DPI set to (96, 96)
[ 19.798] (II) Loading sub module "fb"
[ 19.798] (II) LoadModule: "fb"
[ 19.799] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 19.809] (II) Module fb: vendor="X.Org Foundation"
[ 19.809] compiled for 1.16.1, module version = 1.0.0
[ 19.809] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.809] (**) FBDEV(0): using shadow framebuffer
[ 19.809] (II) Loading sub module "shadow"
[ 19.809] (II) LoadModule: "shadow"
[ 19.809] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 19.812] (II) Module shadow: vendor="X.Org Foundation"
[ 19.812] compiled for 1.16.1, module version = 1.1.0
[ 19.812] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.812] (II) UnloadModule: "vboxvideo"
[ 19.812] (II) Unloading vboxvideo
[ 19.812] (II) UnloadModule: "vesa"
[ 19.812] (II) Unloading vesa
[ 19.812] (==) Depth 24 pixmap format is 32 bpp
[ 19.813] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 19.813] (==) FBDEV(0): Backing store enabled
[ 19.813] (==) FBDEV(0): DPMS enabled
[ 19.813] (==) RandR enabled
[ 19.826] (II) AIGLX: Screen 0 is not DRI2 capable
[ 19.826] (EE) AIGLX: reverting to software rendering
[ 20.879] (II) AIGLX: Loaded and initialized swrast
[ 20.879] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 21.492] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.492] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.492] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.492] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.492] (II) LoadModule: "evdev"
[ 21.492] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.540] (II) Module evdev: vendor="X.Org Foundation"
[ 21.540] compiled for 1.16.1, module version = 2.9.0
[ 21.540] Module class: X.Org XInput Driver
[ 21.540] ABI class: X.Org XInput driver, version 21.0
[ 21.540] (II) Using input driver 'evdev' for 'Power Button'
[ 21.540] (**) Power Button: always reports core events
[ 21.540] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.540] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.540] (--) evdev: Power Button: Found keys
[ 21.540] (II) evdev: Power Button: Configuring as keyboard
[ 21.540] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.540] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.540] (**) Option "xkb_rules" "evdev"
[ 21.540] (**) Option "xkb_model" "pc104"
[ 21.540] (**) Option "xkb_layout" "us"
[ 21.591] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.591] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.591] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.591] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.591] (II) Using input driver 'evdev' for 'Power Button'
[ 21.591] (**) Power Button: always reports core events
[ 21.591] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 21.591] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.591] (--) evdev: Power Button: Found keys
[ 21.591] (II) evdev: Power Button: Configuring as keyboard
[ 21.591] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 21.591] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.591] (**) Option "xkb_rules" "evdev"
[ 21.591] (**) Option "xkb_model" "pc104"
[ 21.591] (**) Option "xkb_layout" "us"
[ 21.592] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 21.592] (II) No input driver specified, ignoring this device.
[ 21.592] (II) This device may have been added with another device file.
[ 21.593] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 21.593] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.593] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 21.593] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.593] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.593] (**) Sleep Button: always reports core events
[ 21.593] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 21.593] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.593] (--) evdev: Sleep Button: Found keys
[ 21.593] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.593] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 21.593] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 21.593] (**) Option "xkb_rules" "evdev"
[ 21.593] (**) Option "xkb_model" "pc104"
[ 21.593] (**) Option "xkb_layout" "us"
[ 21.594] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event5)
[ 21.594] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.594] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.594] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 21.594] (**) Genius Optical Mouse: always reports core events
[ 21.594] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event5"
[ 21.594] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 21.594] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 21.594] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 21.594] (--) evdev: Genius Optical Mouse: Found relative axes
[ 21.594] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 21.594] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 21.594] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 21.595] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 21.595] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.595] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0458:003A.0003/input/input14/event5"
[ 21.595] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 9)
[ 21.595] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 21.595] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 21.595] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 21.595] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 21.595] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 21.596] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 21.596] (II) No input driver specified, ignoring this device.
[ 21.596] (II) This device may have been added with another device file.
[ 21.596] (II) config/udev: Adding input device HD WebCam (/dev/input/event12)
[ 21.596] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.596] (**) HD WebCam: Applying InputClass "system-keyboard"
[ 21.596] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.596] (II) Using input driver 'evdev' for 'HD WebCam'
[ 21.596] (**) HD WebCam: always reports core events
[ 21.596] (**) evdev: HD WebCam: Device: "/dev/input/event12"
[ 21.596] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2c6e
[ 21.597] (--) evdev: HD WebCam: Found keys
[ 21.597] (II) evdev: HD WebCam: Configuring as keyboard
[ 21.597] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13/event12"
[ 21.597] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 10)
[ 21.597] (**) Option "xkb_rules" "evdev"
[ 21.597] (**) Option "xkb_model" "pc104"
[ 21.597] (**) Option "xkb_layout" "us"
[ 21.598] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 21.598] (II) No input driver specified, ignoring this device.
[ 21.598] (II) This device may have been added with another device file.
[ 21.598] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[ 21.598] (II) No input driver specified, ignoring this device.
[ 21.598] (II) This device may have been added with another device file.
[ 21.598] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 UNKNOWN (/dev/input/event9)
[ 21.598] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 21.599] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 21.599] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "touchpad catchall"
[ 21.599] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "Default clickpad buttons"
[ 21.599] (II) LoadModule: "synaptics"
[ 21.599] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 21.621] (II) Module synaptics: vendor="X.Org Foundation"
[ 21.621] compiled for 1.16.1, module version = 1.8.1
[ 21.621] Module class: X.Org XInput Driver
[ 21.621] ABI class: X.Org XInput driver, version 21.0
[ 21.621] (II) Using input driver 'synaptics' for 'SYN1B7E:01 06CB:2970 UNKNOWN'
[ 21.621] (**) SYN1B7E:01 06CB:2970 UNKNOWN: always reports core events
[ 21.621] (**) Option "Device" "/dev/input/event9"
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: x-axis range 0 - 1236 (res 12)
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: y-axis range 0 - 898 (res 12)
[ 21.646] (II) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: device does not report pressure, will use touch data.
[ 21.646] (II) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: device does not report finger width.
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: buttons: left double triple
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: Vendor 0x6cb Product 0x2970
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: invalid pressure range. defaulting to 0 - 255
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: invalid finger width range. defaulting to 0 - 15
[ 21.646] (**) Option "HorizEdgeScroll" "off"
[ 21.646] (**) Option "TapButton1" "1"
[ 21.646] (**) Option "TapButton2" "3"
[ 21.646] (**) Option "TapButton3" "2"
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: touchpad found
[ 21.646] (**) SYN1B7E:01 06CB:2970 UNKNOWN: always reports core events
[ 21.650] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:02/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0002/input/input9/event9"
[ 21.650] (II) XINPUT: Adding extended input device "SYN1B7E:01 06CB:2970 UNKNOWN" (type: TOUCHPAD, id 11)
[ 21.650] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) MinSpeed is now constant deceleration 2.5
[ 21.650] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) MaxSpeed is now 1.75
[ 21.650] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) AccelFactor is now 0.131
[ 21.650] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) keeping acceleration scheme 1
[ 21.650] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration profile 1
[ 21.650] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration factor: 2.000
[ 21.650] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration threshold: 4
[ 21.653] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: touchpad found
[ 21.653] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 UNKNOWN (/dev/input/mouse1)
[ 21.653] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
[ 21.654] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.654] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.654] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.654] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.654] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.654] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.654] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.654] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.654] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.654] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.654] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.654] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 21.654] (**) Option "xkb_rules" "evdev"
[ 21.654] (**) Option "xkb_model" "pc104"
[ 21.654] (**) Option "xkb_layout" "us"
[ 21.655] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.655] (II) No input driver specified, ignoring this device.
[ 21.655] (II) This device may have been added with another device file.
[ 21.658] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[ 21.658] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.658] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[ 21.658] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.658] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 21.658] (**) Acer WMI hotkeys: always reports core events
[ 21.658] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event10"
[ 21.658] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 21.659] (--) evdev: Acer WMI hotkeys: Found keys
[ 21.659] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 21.659] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event10"
[ 21.659] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13)
[ 21.659] (**) Option "xkb_rules" "evdev"
[ 21.659] (**) Option "xkb_model" "pc104"
[ 21.659] (**) Option "xkb_layout" "us"
[ 21.659] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event11)
[ 21.660] (II) No input driver specified, ignoring this device.
[ 21.660] (II) This device may have been added with another device file.
[ 21.660] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 21.660] (II) No input driver specified, ignoring this device.
[ 21.660] (II) This device may have been added with another device file.
[ 21.666] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 21.670] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 21.670] (II) No input driver specified, ignoring this device.
[ 21.670] (II) This device may have been added with another device file.
[ 21.670] (II) config/udev: removing device Genius Optical Mouse
[ 21.682] (II) evdev: Genius Optical Mouse: Close
[ 21.682] (II) UnloadModule: "evdev"
[ 21.682] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event5)
[ 21.682] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.682] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.682] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 21.682] (**) Genius Optical Mouse: always reports core events
[ 21.682] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event5"
[ 21.682] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 21.682] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 21.682] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 21.682] (--) evdev: Genius Optical Mouse: Found relative axes
[ 21.682] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 21.682] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 21.682] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 21.683] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 21.683] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.683] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0458:003A.0003/input/input14/event5"
[ 21.683] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 9)
[ 21.683] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 21.683] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 21.683] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 21.683] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 21.683] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 21.749] (II) evdev: Genius Optical Mouse: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: Acer WMI hotkeys: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: AT Translated Set 2 keyboard: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) UnloadModule: "synaptics"
[ 21.749] (II) evdev: HD WebCam: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: Sleep Button: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: Power Button: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: Power Button: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.756] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 21.756] (==) FBDEV(0): DPMS enabled
[ 21.756] (==) RandR enabled
[ 21.767] (II) AIGLX: Screen 0 is not DRI2 capable
[ 21.767] (EE) AIGLX: reverting to software rendering
[ 21.803] (II) AIGLX: Loaded and initialized swrast
[ 21.803] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 21.899] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.899] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.899] (II) Using input driver 'evdev' for 'Power Button'
[ 21.899] (**) Power Button: always reports core events
[ 21.899] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.900] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.900] (--) evdev: Power Button: Found keys
[ 21.900] (II) evdev: Power Button: Configuring as keyboard
[ 21.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.900] (**) Option "xkb_rules" "evdev"
[ 21.900] (**) Option "xkb_model" "pc104"
[ 21.900] (**) Option "xkb_layout" "us"
[ 21.950] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.950] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.950] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.950] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.950] (II) Using input driver 'evdev' for 'Power Button'
[ 21.950] (**) Power Button: always reports core events
[ 21.950] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 21.950] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.950] (--) evdev: Power Button: Found keys
[ 21.950] (II) evdev: Power Button: Configuring as keyboard
[ 21.950] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 21.950] (**) Option "xkb_rules" "evdev"
[ 21.950] (**) Option "xkb_model" "pc104"
[ 21.950] (**) Option "xkb_layout" "us"
[ 21.951] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 21.951] (II) No input driver specified, ignoring this device.
[ 21.951] (II) This device may have been added with another device file.
[ 21.952] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 21.952] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.952] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 21.952] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.952] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.952] (**) Sleep Button: always reports core events
[ 21.952] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 21.952] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.952] (--) evdev: Sleep Button: Found keys
[ 21.952] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.952] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 21.952] (**) Option "xkb_rules" "evdev"
[ 21.952] (**) Option "xkb_model" "pc104"
[ 21.952] (**) Option "xkb_layout" "us"
[ 21.953] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event5)
[ 21.953] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.953] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.953] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 21.953] (**) Genius Optical Mouse: always reports core events
[ 21.953] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event5"
[ 21.953] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 21.953] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 21.953] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 21.953] (--) evdev: Genius Optical Mouse: Found relative axes
[ 21.953] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 21.953] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 21.953] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 21.953] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 21.953] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.953] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0458:003A.0003/input/input14/event5"
[ 21.954] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 21.954] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 21.954] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 21.954] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 21.954] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 21.955] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 21.955] (II) No input driver specified, ignoring this device.
[ 21.955] (II) This device may have been added with another device file.
[ 21.955] (II) config/udev: Adding input device HD WebCam (/dev/input/event12)
[ 21.955] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.955] (**) HD WebCam: Applying InputClass "system-keyboard"
[ 21.955] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.955] (II) Using input driver 'evdev' for 'HD WebCam'
[ 21.955] (**) HD WebCam: always reports core events
[ 21.955] (**) evdev: HD WebCam: Device: "/dev/input/event12"
[ 21.955] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2c6e
[ 21.955] (--) evdev: HD WebCam: Found keys
[ 21.955] (II) evdev: HD WebCam: Configuring as keyboard
[ 21.956] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13/event12"
[ 21.956] (**) Option "xkb_rules" "evdev"
[ 21.956] (**) Option "xkb_model" "pc104"
[ 21.956] (**) Option "xkb_layout" "us"
[ 21.956] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 21.956] (II) No input driver specified, ignoring this device.
[ 21.956] (II) This device may have been added with another device file.
[ 21.957] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[ 21.957] (II) No input driver specified, ignoring this device.
[ 21.957] (II) This device may have been added with another device file.
[ 21.957] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 UNKNOWN (/dev/input/event9)
[ 21.957] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 21.957] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 21.957] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "touchpad catchall"
[ 21.957] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "Default clickpad buttons"
[ 21.958] (II) Using input driver 'synaptics' for 'SYN1B7E:01 06CB:2970 UNKNOWN'
[ 21.958] (**) SYN1B7E:01 06CB:2970 UNKNOWN: always reports core events
[ 21.958] (**) Option "Device" "/dev/input/event9"
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: x-axis range 0 - 1236 (res 12)
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: y-axis range 0 - 898 (res 12)
[ 21.973] (II) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: device does not report pressure, will use touch data.
[ 21.973] (II) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: device does not report finger width.
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: buttons: left double triple
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: Vendor 0x6cb Product 0x2970
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: invalid pressure range. defaulting to 0 - 255
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: invalid finger width range. defaulting to 0 - 15
[ 21.973] (**) Option "HorizEdgeScroll" "off"
[ 21.973] (**) Option "TapButton1" "1"
[ 21.973] (**) Option "TapButton2" "3"
[ 21.973] (**) Option "TapButton3" "2"
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: touchpad found
[ 21.973] (**) SYN1B7E:01 06CB:2970 UNKNOWN: always reports core events
[ 21.978] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:02/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0002/input/input9/event9"
[ 21.978] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) MinSpeed is now constant deceleration 2.5
[ 21.978] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) MaxSpeed is now 1.75
[ 21.978] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) AccelFactor is now 0.131
[ 21.978] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) keeping acceleration scheme 1
[ 21.978] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration profile 1
[ 21.978] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration factor: 2.000
[ 21.978] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration threshold: 4
[ 21.983] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: touchpad found
[ 21.983] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 UNKNOWN (/dev/input/mouse1)
[ 21.983] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
[ 21.983] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.984] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.984] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.984] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.984] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.984] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.984] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.984] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.984] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.984] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.984] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.984] (**) Option "xkb_rules" "evdev"
[ 21.984] (**) Option "xkb_model" "pc104"
[ 21.984] (**) Option "xkb_layout" "us"
[ 21.985] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.985] (II) No input driver specified, ignoring this device.
[ 21.985] (II) This device may have been added with another device file.
[ 21.988] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[ 21.988] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.988] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[ 21.988] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.988] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 21.988] (**) Acer WMI hotkeys: always reports core events
[ 21.988] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event10"
[ 21.989] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 21.989] (--) evdev: Acer WMI hotkeys: Found keys
[ 21.989] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 21.989] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event10"
[ 21.989] (**) Option "xkb_rules" "evdev"
[ 21.989] (**) Option "xkb_model" "pc104"
[ 21.989] (**) Option "xkb_layout" "us"
[ 21.990] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event11)
[ 21.990] (II) No input driver specified, ignoring this device.
[ 21.990] (II) This device may have been added with another device file.
[ 21.990] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 21.990] (II) No input driver specified, ignoring this device.
[ 21.990] (II) This device may have been added with another device file.
[ 21.996] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 45.049] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 45.196] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 856.906] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 886.458] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 1130.652] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 1286.149] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 18.153] X Protocol Version 11, Revision 0
[ 18.153] Build Operating System: openSUSE SUSE LINUX
[ 18.153] Current Operating System: Linux linux-rbvb 3.16.7-7-desktop #1 SMP PREEMPT Wed Dec 17 18:00:44 UTC 2014 (762f27a) x86_64
[ 18.153] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.7-7-desktop root=UUID=ef713aac-054f-4ac0-904f-46b70652e107 ro showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
[ 18.153] Build Date: 18 December 2014 02:06:21PM
[ 18.153]
[ 18.153] Current version of pixman: 0.32.6
[ 18.153] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.153] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.154] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 27 10:08:27 2015
[ 18.180] (==) Using config file: "/etc/X11/xorg.conf.install"
[ 18.180] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.180] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.181] (==) ServerLayout "Layout"
[ 18.181] (**) |-->Screen "vboxvideo" (0)
[ 18.181] (**) | |-->Monitor "<default monitor>"
[ 18.181] (**) | |-->Device "vboxvideo"
[ 18.181] (==) No monitor specified for screen "vboxvideo".
Using a default monitor configuration.
[ 18.181] (**) |-->Screen "vmware" (1)
[ 18.181] (**) | |-->Monitor "<default monitor>"
[ 18.182] (**) | |-->Device "vmware"
[ 18.182] (==) No monitor specified for screen "vmware".
Using a default monitor configuration.
[ 18.182] (**) |-->Screen "modesetting" (2)
[ 18.182] (**) | |-->Monitor "<default monitor>"
[ 18.182] (**) | |-->Device "modesetting"
[ 18.182] (==) No monitor specified for screen "modesetting".
Using a default monitor configuration.
[ 18.182] (**) |-->Screen "fbdev" (3)
[ 18.182] (**) | |-->Monitor "<default monitor>"
[ 18.182] (**) | |-->Device "fbdev"
[ 18.182] (==) No monitor specified for screen "fbdev".
Using a default monitor configuration.
[ 18.182] (**) |-->Screen "vesa" (4)
[ 18.182] (**) | |-->Monitor "<default monitor>"
[ 18.182] (**) | |-->Device "vesa"
[ 18.182] (==) No monitor specified for screen "vesa".
Using a default monitor configuration.
[ 18.182] (==) Automatically adding devices
[ 18.182] (==) Automatically enabling devices
[ 18.183] (==) Automatically adding GPU devices
[ 18.605] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 18.605] Entry deleted from font path.
[ 18.622] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 18.622] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 18.622] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.622] (II) Loader magic: 0x80ec60
[ 18.622] (II) Module ABI versions:
[ 18.622] X.Org ANSI C Emulation: 0.4
[ 18.622] X.Org Video Driver: 18.0
[ 18.622] X.Org XInput driver : 21.0
[ 18.622] X.Org Server Extension : 8.0
[ 18.623] (--) PCI:*(0:0:2:0) 8086:0f31:1025:0905 rev 14, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00002050/8
[ 18.623] (II) LoadModule: "glx"
[ 18.701] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 19.273] (II) Module glx: vendor="X.Org Foundation"
[ 19.273] compiled for 1.16.1, module version = 1.0.0
[ 19.273] ABI class: X.Org Server Extension, version 8.0
[ 19.273] (==) AIGLX enabled
[ 19.274] (II) LoadModule: "vboxvideo"
[ 19.274] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[ 19.301] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 19.301] compiled for 10.16.0, module version = 1.0.1
[ 19.301] Module class: X.Org Video Driver
[ 19.301] ABI class: X.Org Video Driver, version 18.0
[ 19.301] (**) Load address of symbol "VBOXVIDEO" is 0x7fc62790e3e0
[ 19.301] (II) LoadModule: "vmware"
[ 19.320] (WW) Warning, couldn't open module vmware
[ 19.320] (II) UnloadModule: "vmware"
[ 19.320] (II) Unloading vmware
[ 19.320] (EE) Failed to load module "vmware" (module does not exist, 0)
[ 19.320] (II) LoadModule: "modesetting"
[ 19.320] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 19.366] (II) Module modesetting: vendor="X.Org Foundation"
[ 19.366] compiled for 1.16.1, module version = 0.9.0
[ 19.366] Module class: X.Org Video Driver
[ 19.366] ABI class: X.Org Video Driver, version 18.0
[ 19.366] (II) LoadModule: "fbdev"
[ 19.366] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 19.490] (II) Module fbdev: vendor="X.Org Foundation"
[ 19.490] compiled for 1.16.1, module version = 0.4.4
[ 19.490] Module class: X.Org Video Driver
[ 19.490] ABI class: X.Org Video Driver, version 18.0
[ 19.490] (II) LoadModule: "vesa"
[ 19.491] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 19.791] (II) Module vesa: vendor="X.Org Foundation"
[ 19.791] compiled for 1.16.1, module version = 2.3.3
[ 19.791] Module class: X.Org Video Driver
[ 19.791] ABI class: X.Org Video Driver, version 18.0
[ 19.791] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 19.791] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 19.791] (II) FBDEV: driver for framebuffer: fbdev
[ 19.791] (II) VESA: driver for VESA chipsets: vesa
[ 19.791] (++) using VT number 7
[ 19.791] (EE) open /dev/dri/card0: No such file or directory
[ 19.791] (WW) Falling back to old probe method for modesetting
[ 19.791] (EE) open /dev/dri/card0: No such file or directory
[ 19.791] (II) Loading sub module "fbdevhw"
[ 19.791] (II) LoadModule: "fbdevhw"
[ 19.792] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 19.798] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 19.798] compiled for 1.16.1, module version = 0.0.2
[ 19.798] ABI class: X.Org Video Driver, version 18.0
[ 19.798] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 19.798] (II) FBDEV(1): using default device
[ 19.798] (WW) Falling back to old probe method for vesa
[ 19.798] (EE) Screen 0 deleted because of no matching config section.
[ 19.798] (II) UnloadModule: "modesetting"
[ 19.798] (II) FBDEV(0): Creating default Display subsection in Screen section
"fbdev" for depth/fbbpp 24/32
[ 19.798] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 19.798] (==) FBDEV(0): RGB weight 888
[ 19.798] (==) FBDEV(0): Default visual is TrueColor
[ 19.798] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.798] (II) FBDEV(0): hardware: EFI VGA (video memory: 4128kB)
[ 19.798] (II) FBDEV(0): checking modes against framebuffer device...
[ 19.798] (II) FBDEV(0): checking modes against monitor...
[ 19.798] (--) FBDEV(0): Virtual size is 1366x768 (pitch 1366)
[ 19.798] (**) FBDEV(0): Built-in mode "current": 104.9 MHz, 60.5 kHz, 76.4 Hz
[ 19.798] (II) FBDEV(0): Modeline "current"x0.0 104.92 1366 1398 1566 1734 768 772 776 792 -hsync -vsync -csync (60.5 kHz b)
[ 19.798] (==) FBDEV(0): DPI set to (96, 96)
[ 19.798] (II) Loading sub module "fb"
[ 19.798] (II) LoadModule: "fb"
[ 19.799] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 19.809] (II) Module fb: vendor="X.Org Foundation"
[ 19.809] compiled for 1.16.1, module version = 1.0.0
[ 19.809] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.809] (**) FBDEV(0): using shadow framebuffer
[ 19.809] (II) Loading sub module "shadow"
[ 19.809] (II) LoadModule: "shadow"
[ 19.809] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 19.812] (II) Module shadow: vendor="X.Org Foundation"
[ 19.812] compiled for 1.16.1, module version = 1.1.0
[ 19.812] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.812] (II) UnloadModule: "vboxvideo"
[ 19.812] (II) Unloading vboxvideo
[ 19.812] (II) UnloadModule: "vesa"
[ 19.812] (II) Unloading vesa
[ 19.812] (==) Depth 24 pixmap format is 32 bpp
[ 19.813] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 19.813] (==) FBDEV(0): Backing store enabled
[ 19.813] (==) FBDEV(0): DPMS enabled
[ 19.813] (==) RandR enabled
[ 19.826] (II) AIGLX: Screen 0 is not DRI2 capable
[ 19.826] (EE) AIGLX: reverting to software rendering
[ 20.879] (II) AIGLX: Loaded and initialized swrast
[ 20.879] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 21.492] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.492] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.492] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.492] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.492] (II) LoadModule: "evdev"
[ 21.492] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.540] (II) Module evdev: vendor="X.Org Foundation"
[ 21.540] compiled for 1.16.1, module version = 2.9.0
[ 21.540] Module class: X.Org XInput Driver
[ 21.540] ABI class: X.Org XInput driver, version 21.0
[ 21.540] (II) Using input driver 'evdev' for 'Power Button'
[ 21.540] (**) Power Button: always reports core events
[ 21.540] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.540] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.540] (--) evdev: Power Button: Found keys
[ 21.540] (II) evdev: Power Button: Configuring as keyboard
[ 21.540] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.540] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.540] (**) Option "xkb_rules" "evdev"
[ 21.540] (**) Option "xkb_model" "pc104"
[ 21.540] (**) Option "xkb_layout" "us"
[ 21.591] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.591] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.591] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.591] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.591] (II) Using input driver 'evdev' for 'Power Button'
[ 21.591] (**) Power Button: always reports core events
[ 21.591] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 21.591] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.591] (--) evdev: Power Button: Found keys
[ 21.591] (II) evdev: Power Button: Configuring as keyboard
[ 21.591] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 21.591] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 21.591] (**) Option "xkb_rules" "evdev"
[ 21.591] (**) Option "xkb_model" "pc104"
[ 21.591] (**) Option "xkb_layout" "us"
[ 21.592] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 21.592] (II) No input driver specified, ignoring this device.
[ 21.592] (II) This device may have been added with another device file.
[ 21.593] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 21.593] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.593] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 21.593] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.593] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.593] (**) Sleep Button: always reports core events
[ 21.593] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 21.593] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.593] (--) evdev: Sleep Button: Found keys
[ 21.593] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.593] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 21.593] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 21.593] (**) Option "xkb_rules" "evdev"
[ 21.593] (**) Option "xkb_model" "pc104"
[ 21.593] (**) Option "xkb_layout" "us"
[ 21.594] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event5)
[ 21.594] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.594] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.594] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 21.594] (**) Genius Optical Mouse: always reports core events
[ 21.594] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event5"
[ 21.594] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 21.594] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 21.594] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 21.594] (--) evdev: Genius Optical Mouse: Found relative axes
[ 21.594] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 21.594] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 21.594] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 21.595] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 21.595] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.595] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0458:003A.0003/input/input14/event5"
[ 21.595] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 9)
[ 21.595] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 21.595] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 21.595] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 21.595] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 21.595] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 21.596] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 21.596] (II) No input driver specified, ignoring this device.
[ 21.596] (II) This device may have been added with another device file.
[ 21.596] (II) config/udev: Adding input device HD WebCam (/dev/input/event12)
[ 21.596] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.596] (**) HD WebCam: Applying InputClass "system-keyboard"
[ 21.596] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.596] (II) Using input driver 'evdev' for 'HD WebCam'
[ 21.596] (**) HD WebCam: always reports core events
[ 21.596] (**) evdev: HD WebCam: Device: "/dev/input/event12"
[ 21.596] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2c6e
[ 21.597] (--) evdev: HD WebCam: Found keys
[ 21.597] (II) evdev: HD WebCam: Configuring as keyboard
[ 21.597] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13/event12"
[ 21.597] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 10)
[ 21.597] (**) Option "xkb_rules" "evdev"
[ 21.597] (**) Option "xkb_model" "pc104"
[ 21.597] (**) Option "xkb_layout" "us"
[ 21.598] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 21.598] (II) No input driver specified, ignoring this device.
[ 21.598] (II) This device may have been added with another device file.
[ 21.598] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[ 21.598] (II) No input driver specified, ignoring this device.
[ 21.598] (II) This device may have been added with another device file.
[ 21.598] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 UNKNOWN (/dev/input/event9)
[ 21.598] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 21.599] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 21.599] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "touchpad catchall"
[ 21.599] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "Default clickpad buttons"
[ 21.599] (II) LoadModule: "synaptics"
[ 21.599] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 21.621] (II) Module synaptics: vendor="X.Org Foundation"
[ 21.621] compiled for 1.16.1, module version = 1.8.1
[ 21.621] Module class: X.Org XInput Driver
[ 21.621] ABI class: X.Org XInput driver, version 21.0
[ 21.621] (II) Using input driver 'synaptics' for 'SYN1B7E:01 06CB:2970 UNKNOWN'
[ 21.621] (**) SYN1B7E:01 06CB:2970 UNKNOWN: always reports core events
[ 21.621] (**) Option "Device" "/dev/input/event9"
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: x-axis range 0 - 1236 (res 12)
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: y-axis range 0 - 898 (res 12)
[ 21.646] (II) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: device does not report pressure, will use touch data.
[ 21.646] (II) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: device does not report finger width.
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: buttons: left double triple
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: Vendor 0x6cb Product 0x2970
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: invalid pressure range. defaulting to 0 - 255
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: invalid finger width range. defaulting to 0 - 15
[ 21.646] (**) Option "HorizEdgeScroll" "off"
[ 21.646] (**) Option "TapButton1" "1"
[ 21.646] (**) Option "TapButton2" "3"
[ 21.646] (**) Option "TapButton3" "2"
[ 21.646] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: touchpad found
[ 21.646] (**) SYN1B7E:01 06CB:2970 UNKNOWN: always reports core events
[ 21.650] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:02/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0002/input/input9/event9"
[ 21.650] (II) XINPUT: Adding extended input device "SYN1B7E:01 06CB:2970 UNKNOWN" (type: TOUCHPAD, id 11)
[ 21.650] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) MinSpeed is now constant deceleration 2.5
[ 21.650] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) MaxSpeed is now 1.75
[ 21.650] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) AccelFactor is now 0.131
[ 21.650] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) keeping acceleration scheme 1
[ 21.650] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration profile 1
[ 21.650] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration factor: 2.000
[ 21.650] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration threshold: 4
[ 21.653] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: touchpad found
[ 21.653] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 UNKNOWN (/dev/input/mouse1)
[ 21.653] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
[ 21.654] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.654] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.654] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.654] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.654] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.654] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.654] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.654] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.654] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.654] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.654] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.654] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 21.654] (**) Option "xkb_rules" "evdev"
[ 21.654] (**) Option "xkb_model" "pc104"
[ 21.654] (**) Option "xkb_layout" "us"
[ 21.655] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.655] (II) No input driver specified, ignoring this device.
[ 21.655] (II) This device may have been added with another device file.
[ 21.658] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[ 21.658] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.658] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[ 21.658] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.658] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 21.658] (**) Acer WMI hotkeys: always reports core events
[ 21.658] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event10"
[ 21.658] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 21.659] (--) evdev: Acer WMI hotkeys: Found keys
[ 21.659] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 21.659] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event10"
[ 21.659] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13)
[ 21.659] (**) Option "xkb_rules" "evdev"
[ 21.659] (**) Option "xkb_model" "pc104"
[ 21.659] (**) Option "xkb_layout" "us"
[ 21.659] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event11)
[ 21.660] (II) No input driver specified, ignoring this device.
[ 21.660] (II) This device may have been added with another device file.
[ 21.660] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 21.660] (II) No input driver specified, ignoring this device.
[ 21.660] (II) This device may have been added with another device file.
[ 21.666] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 21.670] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 21.670] (II) No input driver specified, ignoring this device.
[ 21.670] (II) This device may have been added with another device file.
[ 21.670] (II) config/udev: removing device Genius Optical Mouse
[ 21.682] (II) evdev: Genius Optical Mouse: Close
[ 21.682] (II) UnloadModule: "evdev"
[ 21.682] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event5)
[ 21.682] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.682] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.682] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 21.682] (**) Genius Optical Mouse: always reports core events
[ 21.682] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event5"
[ 21.682] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 21.682] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 21.682] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 21.682] (--) evdev: Genius Optical Mouse: Found relative axes
[ 21.682] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 21.682] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 21.682] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 21.683] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 21.683] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.683] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0458:003A.0003/input/input14/event5"
[ 21.683] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 9)
[ 21.683] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 21.683] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 21.683] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 21.683] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 21.683] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 21.749] (II) evdev: Genius Optical Mouse: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: Acer WMI hotkeys: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: AT Translated Set 2 keyboard: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) UnloadModule: "synaptics"
[ 21.749] (II) evdev: HD WebCam: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: Sleep Button: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: Power Button: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.749] (II) evdev: Power Button: Close
[ 21.749] (II) UnloadModule: "evdev"
[ 21.756] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 21.756] (==) FBDEV(0): DPMS enabled
[ 21.756] (==) RandR enabled
[ 21.767] (II) AIGLX: Screen 0 is not DRI2 capable
[ 21.767] (EE) AIGLX: reverting to software rendering
[ 21.803] (II) AIGLX: Loaded and initialized swrast
[ 21.803] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 21.899] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.899] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.899] (II) Using input driver 'evdev' for 'Power Button'
[ 21.899] (**) Power Button: always reports core events
[ 21.899] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.900] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.900] (--) evdev: Power Button: Found keys
[ 21.900] (II) evdev: Power Button: Configuring as keyboard
[ 21.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.900] (**) Option "xkb_rules" "evdev"
[ 21.900] (**) Option "xkb_model" "pc104"
[ 21.900] (**) Option "xkb_layout" "us"
[ 21.950] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.950] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.950] (**) Power Button: Applying InputClass "system-keyboard"
[ 21.950] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.950] (II) Using input driver 'evdev' for 'Power Button'
[ 21.950] (**) Power Button: always reports core events
[ 21.950] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 21.950] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.950] (--) evdev: Power Button: Found keys
[ 21.950] (II) evdev: Power Button: Configuring as keyboard
[ 21.950] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 21.950] (**) Option "xkb_rules" "evdev"
[ 21.950] (**) Option "xkb_model" "pc104"
[ 21.950] (**) Option "xkb_layout" "us"
[ 21.951] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 21.951] (II) No input driver specified, ignoring this device.
[ 21.951] (II) This device may have been added with another device file.
[ 21.952] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 21.952] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.952] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 21.952] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.952] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.952] (**) Sleep Button: always reports core events
[ 21.952] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 21.952] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.952] (--) evdev: Sleep Button: Found keys
[ 21.952] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.952] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 21.952] (**) Option "xkb_rules" "evdev"
[ 21.952] (**) Option "xkb_model" "pc104"
[ 21.952] (**) Option "xkb_layout" "us"
[ 21.953] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event5)
[ 21.953] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.953] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 21.953] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 21.953] (**) Genius Optical Mouse: always reports core events
[ 21.953] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event5"
[ 21.953] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 21.953] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 21.953] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 21.953] (--) evdev: Genius Optical Mouse: Found relative axes
[ 21.953] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 21.953] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 21.953] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 21.953] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 21.953] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.953] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0458:003A.0003/input/input14/event5"
[ 21.954] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 21.954] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 21.954] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 21.954] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 21.954] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 21.955] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 21.955] (II) No input driver specified, ignoring this device.
[ 21.955] (II) This device may have been added with another device file.
[ 21.955] (II) config/udev: Adding input device HD WebCam (/dev/input/event12)
[ 21.955] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.955] (**) HD WebCam: Applying InputClass "system-keyboard"
[ 21.955] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 21.955] (II) Using input driver 'evdev' for 'HD WebCam'
[ 21.955] (**) HD WebCam: always reports core events
[ 21.955] (**) evdev: HD WebCam: Device: "/dev/input/event12"
[ 21.955] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2c6e
[ 21.955] (--) evdev: HD WebCam: Found keys
[ 21.955] (II) evdev: HD WebCam: Configuring as keyboard
[ 21.956] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13/event12"
[ 21.956] (**) Option "xkb_rules" "evdev"
[ 21.956] (**) Option "xkb_model" "pc104"
[ 21.956] (**) Option "xkb_layout" "us"
[ 21.956] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 21.956] (II) No input driver specified, ignoring this device.
[ 21.956] (II) This device may have been added with another device file.
[ 21.957] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[ 21.957] (II) No input driver specified, ignoring this device.
[ 21.957] (II) This device may have been added with another device file.
[ 21.957] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 UNKNOWN (/dev/input/event9)
[ 21.957] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 21.957] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "evdev touchpad catchall"
[ 21.957] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "touchpad catchall"
[ 21.957] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Applying InputClass "Default clickpad buttons"
[ 21.958] (II) Using input driver 'synaptics' for 'SYN1B7E:01 06CB:2970 UNKNOWN'
[ 21.958] (**) SYN1B7E:01 06CB:2970 UNKNOWN: always reports core events
[ 21.958] (**) Option "Device" "/dev/input/event9"
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: x-axis range 0 - 1236 (res 12)
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: y-axis range 0 - 898 (res 12)
[ 21.973] (II) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: device does not report pressure, will use touch data.
[ 21.973] (II) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: device does not report finger width.
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: buttons: left double triple
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: Vendor 0x6cb Product 0x2970
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: invalid pressure range. defaulting to 0 - 255
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: invalid finger width range. defaulting to 0 - 15
[ 21.973] (**) Option "HorizEdgeScroll" "off"
[ 21.973] (**) Option "TapButton1" "1"
[ 21.973] (**) Option "TapButton2" "3"
[ 21.973] (**) Option "TapButton3" "2"
[ 21.973] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: touchpad found
[ 21.973] (**) SYN1B7E:01 06CB:2970 UNKNOWN: always reports core events
[ 21.978] (**) Option "config_info" "udev:/sys/devices/platform/80860F41:02/i2c-0/i2c-SYN1B7E:01/0018:06CB:2970.0002/input/input9/event9"
[ 21.978] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) MinSpeed is now constant deceleration 2.5
[ 21.978] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) MaxSpeed is now 1.75
[ 21.978] (**) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: (accel) AccelFactor is now 0.131
[ 21.978] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) keeping acceleration scheme 1
[ 21.978] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration profile 1
[ 21.978] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration factor: 2.000
[ 21.978] (**) SYN1B7E:01 06CB:2970 UNKNOWN: (accel) acceleration threshold: 4
[ 21.983] (--) synaptics: SYN1B7E:01 06CB:2970 UNKNOWN: touchpad found
[ 21.983] (II) config/udev: Adding input device SYN1B7E:01 06CB:2970 UNKNOWN (/dev/input/mouse1)
[ 21.983] (**) SYN1B7E:01 06CB:2970 UNKNOWN: Ignoring device from InputClass "touchpad ignore duplicates"
[ 21.983] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.984] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.984] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 21.984] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.984] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.984] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.984] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.984] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.984] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.984] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.984] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.984] (**) Option "xkb_rules" "evdev"
[ 21.984] (**) Option "xkb_model" "pc104"
[ 21.984] (**) Option "xkb_layout" "us"
[ 21.985] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.985] (II) No input driver specified, ignoring this device.
[ 21.985] (II) This device may have been added with another device file.
[ 21.988] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event10)
[ 21.988] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.988] (**) Acer WMI hotkeys: Applying InputClass "system-keyboard"
[ 21.988] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.988] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 21.988] (**) Acer WMI hotkeys: always reports core events
[ 21.988] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event10"
[ 21.989] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 21.989] (--) evdev: Acer WMI hotkeys: Found keys
[ 21.989] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 21.989] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event10"
[ 21.989] (**) Option "xkb_rules" "evdev"
[ 21.989] (**) Option "xkb_model" "pc104"
[ 21.989] (**) Option "xkb_layout" "us"
[ 21.990] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event11)
[ 21.990] (II) No input driver specified, ignoring this device.
[ 21.990] (II) This device may have been added with another device file.
[ 21.990] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 21.990] (II) No input driver specified, ignoring this device.
[ 21.990] (II) This device may have been added with another device file.
[ 21.996] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 45.049] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 45.196] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 856.906] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 886.458] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 1130.652] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
[ 1286.149] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel)
И покажите вывод lspci | grep -e VGA -e 3D
[console]linux-rbvb:/home/kls # lspci | grep -e VGA -e 3D
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
[/console]
bionet, пакет xf86-video-intel стоит?
Где десятая консоль во время чорного экрана?
во время черного экрана вообще ниче сделать не получается. ничего не происходит, только винт шуршит и все.
и ребутнуться не получается, только вырубить машину с кнопки.
xf86-video-intel
да, стоит последний:
[console]linux-rbvb:/home/kls # zypper in xf86-video-intel
Loading repository data...
Reading installed packages...
'xf86-video-intel' уже установлен.
Нет кандидатов на обновление 'xf86-video-intel-2.99.916-9.1.x86_64'. Новейшая версия уже установлена.
Разрешение зависимостей пакетов...
Нечего выполнять.
[/console]
bionet, xorg.conf тоже покажите.
bionet, xorg.conf тоже покажите.
содержимое xorg.conf.install:
text
Section "Device"
Identifier "vboxvideo"
Driver "vboxvideo"
EndSection
Section "Screen"
Identifier "vboxvideo"
Device "vboxvideo"
EndSection
Section "Device"
Identifier "vmware"
Driver "vmware"
EndSection
Section "Screen"
Identifier "vmware"
Device "vmware"
EndSection
Section "Device"
Identifier "modesetting"
Driver "modesetting"
EndSection
Section "Screen"
Identifier "modesetting"
Device "modesetting"
EndSection
Section "Device"
Identifier "fbdev"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "fbdev"
Device "fbdev"
EndSection
Section "Device"
Identifier "vesa"
Driver "vesa"
EndSection
Section "Screen"
Identifier "vesa"
Device "vesa"
EndSection
Section "ServerLayout"
Identifier "Layout"
Screen "vboxvideo"
Screen "vmware"
Screen "modesetting"
Screen "fbdev"
Screen "vesa"
EndSection
вот еще что интересно. заглянул сейчас в /etc/X11/xorg.conf.d/50-device.conf и смущает строчки по поводу радеона:
text
#Section "Device"
# Identifier "Default Device"
#
# #Driver "radeon"
#
# ## Required magic for radeon/radeonhd drivers; output name
# ## (here: "DVI-0") can be figured out via 'xrandr -q'
# #Option "monitor-DVI-0" "Default Monitor"
#
#EndSectionи смущает строчки по поводу радеона:
Нечему там смущать, все закомментировано.
Да, модули vbox* и vmware не нужны, соответствующие xf86-video-* можно выкинуть. А xorg.conf.install ни на что не будет влиять, пока вы его не переименуете в xorg.conf. Получается, у вас иксы стартуют с параметрами по умолчанию, но не находят /dev/dri/card0. Либо нода устройства не создается, либо нет прав чтения и записи в устройство.
Получается, у вас иксы стартуют с параметрами по умолчанию, но не находят /dev/dri/card0. Либо нода устройства не создается, либо нет прав чтения и записи в устройство.
ну да, каталога /dev/dri вообще нет. соответственно и card0 отсутсвует:
https://www.dropbox.com/s/a9fptplhzr3x9my/%D1%81%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA4.png?dl=0
тогда вопрос такой: как можно исправить чтобы в обычном режиме загружаться? переименовать xorg.conf.install в xorg.conf, сохранить это дело. а дальше что?
еще интересно, каким макаром загрузка в recovery mode проходит нормально, грузятся иксы и все остальное работает?
Рекомендую ознакомится для начала: https://bugzilla.opensuse.org/buglist.cgi?quicksearch=%2Fdev%2Fdri%2Fcard0 Внимательно причем.
bionet, Для начала в грабе убейте splash silent, хоть будет понятно что происходит во время загрузки....
[quote="bionet"]и смущает строчки по поводу радеона:
Нечему там смущать, все закомментировано.
Да, модули vbox* и vmware не нужны, соответствующие xf86-video-* можно выкинуть. А xorg.conf.install ни на что не будет влиять, пока вы его не переименуете в xorg.conf. Получается, у вас иксы стартуют с параметрами по умолчанию, но не находят /dev/dri/card0. Либо нода устройства не создается, либо нет прав чтения и записи в устройство.
[/quote]
Да тоже "чесал репу", когда почитал.
bionet
А напишите сами всё. https://www.google.ru/search?client=ubuntu&channel=fs&q=%D0%B0%D0%BA%D0%B2%D0%B0%D1%8D%D0%BB%D1%8C+%D0%BC%D0%B8%D0%B4%D0%B8%D0%BA%D0%B0%D0%BD%D0%B8&ie=utf-8&oe=utf-8&gfe_rd=cr&ei=jHuIVMKdHIi0wQPLooHAAQ#newwindow=1&channel=fs&q=xorg.conf
Да сколько лет делал. Работает.
bionet, для recovery смотрите, какие параметры передаются ядру, а среди них есть как минимум два интересных: nomodeset и x11-failsafe, второй обрабатывается не ядром, а, похоже, systemd. И именно systemd (точнее, systemd-udev) виноват в том, что не создает ноду устройства (нет правила, которое бы это делало), а ядро, вероятно, вашего видео еще не знает. Правило можно и написать, а вот ядро нужно пробовать наисвежайшее.
"Суть такова"
Где десятая консоль во время чорного экрана?
А интересно. А где она? (мне хоть - "для общего развития" :) )
Фигня всё. Раньше мы писали этот xorg.conf - и всё получалось. А сейчас - эта systemd. :(
Я - как-то не поработал в ней. Но, попробовать понять?
А расскажите.
mvt, А при чем тут systemd? =)
xorg.conf и сейчас можно написать и он будет работать...
Скорее всего из-за плимута ее и не видно...А интересно. А где она?
...такая-же хрень у меня при попытке посмотреть на последнюю бубунту была, пока splash silent не отрубил в консоль не мог попасть))
Скорее всего из-за плимута ее и не видно...
...такая-же хрень у меня при попытке посмотреть на последнюю бубунту была, пока splash silent не отрубил в консоль не мог попасть))
Вот. У меня - убунта 14.04.
Загручик - не её, грузится в текстовом режиме. За секунды три. И где там какие-то экраны, которые можно считать?
Войдите или зарегистрируйтесь, чтобы ответить.
