LinuxForum.Fans
Тема

Низкое разрешение экрана в OpenSuse 12.3

Автор: 5iver 22 сообщений 5963 просмотров
07.11.2013 21:02 · отредактировано #347857

Здравствуйте, вчера установил на свой компьютер OpenSuse 12.3. После установки максимально возможное разрешение экрана составляло 1024х768, Это далеко не самое большое разрешение для моего ПК (видеокарта Nvidia Geforce 9600GT, Монитор Acer V173). Я решил установить видеодрайвер. Драйвер устанавливал по следующей инструкции : http://ru.opensuse.org/SDB:%D0%94%D1%80%D0%B0%D0%B9%D0%B2%D0%B5%D1%80%D1%8B_NVIDIA с помошью zypper.

Показать
#zypper ar -f [url]ftp://download.nvidia.com/opensuse/12.3/[/url] nvidia
#zypper install x11-video-nvidiaG03

Разрешение не поменялось. Тогда я решил поставить драйвера с официального сайта Nvidia. Перед установкой занес nouveau в blacklist и отключил X-сервер

Показать
#echo “blacklist nouveau” >> /etc/modprobe.d/blacklist-nouveau.conf
#rcxdm stop

Затем установил драйвер NVIDIA-Linux-x86-331.20.run

Показать
sh NVIDIA-Linux-x86-331.20.run

после этого максимальное разрешение экрана стало 640х480.

Если удалить драйвер NVIDIA-Linux-x86-331.20.run то Х-сервер не поднимается. Какую ошибку выдает я к сожалению не помню, Драйвер вроде установлен корректно.

Показать
fiver@home:~> sudo /sbin/lspci | grep VGA
root's password:
01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1)

Подскажите пожалуйста что еще можно сделать, чтобы получить приемлимое разрешение экрана. Заранее спасибо.

08.11.2013 01:12 #347947

Если как по инструкции, то попробуйте выполнить в консоли суперпользователя:

text
nvidia-xconfig

А ещё лучше:

text
nvidia-settings

Там пункт X Server Display configuration
И нажать кнопку:
Save to X configuration file...
Перезагрузить ПК... или перезапустить X сервер...

Это может помочь.. и решить часть проблем помимо этой.
Проверьте этот вариант, после ... если не поможет, попробуйте совет 24.

08.11.2013 01:20 #347949
"mozgfx" написал:
Проверьте этот вариант, после ... если не поможет, попробуйте совет 24.

Вариант не противоречит совету 24.
Дополняет его(постустановочные действия частного характера).
Там лишь проверенный метод установки драйвера без сюрпризов. Чтобы не было вопросов, что что-то было упущено, а они всегда имеются.

08.11.2013 12:47 · отредактировано #347999

5iver, помню была такая проблемка ([РЕШЕНО] Проблемы с отображением рабочего стола в openSUSE 12.3). Зайдите сюда. Скачайте файл для установки в один клик, установите, добавьте себя в группу video:

text
# usermod -a -G video имя_пользователя

и перезагрузитесь! Все должно заработать.

08.11.2013 13:57 #348009
kirillov3798 написал:
5iver, помню была такая проблемка ([РЕШЕНО] Проблемы с отображением рабочего стола в openSUSE 12.3). Зайдите сюда. Скачайте файл для установки в один клик, установите, добавьте себя в группу video:
text
# usermod -a -G video имя_пользователя

и перезагрузитесь! Все должно заработать.

Не написал в 1 посте, что пользователь и так в группе video. Проблема остается.

verg написал:
Какой монитор?

Монитор Acer v173. Вечером попробую предложенный вами способ.

08.11.2013 16:14 #348040

Выполнил совет №24 из этой темы http://linuxforum.ru/viewtopic.php?id=26412. Не помогло в nvidia-settings максимальное разрешение все равно 640х480. Xrandr выдает тоже самое.

08.11.2013 17:56 #348056

5iver,
Покажите:

text
cat /etc/X11/xorg.conf
08.11.2013 17:59 #348057
verg написал:
5iver,
Покажите:
text
cat /etc/X11/xorg.conf

Пожалуйста

Показать
fiver@home:~> cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.20 (buildmeister@swio-display-x64-rhel04-06) Wed Oct 30 18:38:00 PDT 2013

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 331.20 (buildmeister@swio-display-x64-rhel04-06) Wed Oct 30 18:37:41 PDT 2013

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-1"
Option "metamodes" "nvidia-auto-select +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
08.11.2013 18:06 #348058

5iver,
Ещё (до кучи):

text
uname -a
rpm -qa | grep nvidia
rpm -qa | grep kernel
cat /etc/X11/xorg.conf
cat /etc/group | grep video
cat /etc/modprobe.d/50-blacklist.conf | grep nouveau
cat /etc/sysconfig/kernel | grep NO_KMS_IN_INITRD
nvidia-settings -v
grep -i driver /var/log/Xorg.0.log
glxinfo | grep render

От рута:

text
cat /etc/default/grub | grep GRUB_CMDLINE_LINUX_DEFAULT
cat /boot/grub2/grub.cfg
08.11.2013 18:17 #348060
verg написал:
5iver,
Ещё (до кучи):
text
uname -a
rpm -qa | grep nvidia
rpm -qa | grep kernel
cat /etc/X11/xorg.conf
cat /etc/group | grep video
cat /etc/modprobe.d/50-blacklist.conf | grep nouveau
cat /etc/sysconfig/kernel | grep NO_KMS_IN_INITRD
nvidia-settings -v
grep -i driver /var/log/Xorg.0.log
glxinfo | grep render

От рута:

text
cat /etc/default/grub | grep GRUB_CMDLINE_LINUX_DEFAULT
cat /boot/grub2/grub.cfg

Если /etc/group доступен на чтение простому пользователю, я балдею :-)

08.11.2013 18:17 #348061

Вот Пожалуйста

Показать
fiver@home:~> uname -a
Linux home 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) i686 i686 i386 GNU/Linux
fiver@home:~> rpm -qa | grep nvidia
fiver@home:~> rpm -qa | grep kernel
kernel-desktop-devel-3.7.10-1.16.1.i686
kernel-devel-3.7.10-1.16.1.noarch
kernel-firmware-20130714git-1.9.1.noarch
kernel-desktop-3.7.10-1.1.1.i686
kernel-source-3.7.10-1.16.1.noarch
kernel-desktop-3.7.10-1.16.1.i686
Показать
fiver@home:~> cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.20 (buildmeister@swio-display-x64-rhel04-06) Wed Oct 30 18:38:00 PDT 2013

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 331.20 (buildmeister@swio-display-x64-rhel04-06) Wed Oct 30 18:37:41 PDT 2013

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600 GT"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-1"
Option "metamodes" "nvidia-auto-select +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Показать
fiver@home:~> cat /etc/group | grep video
video:x:33:fiver
fiver@home:~> cat /etc/modprobe.d/50-blacklist.conf | grep nouveau
blacklist nouveau
fiver@home:~> cat /etc/sysconfig/kernel | grep NO_KMS_IN_INITRD
NO_KMS_IN_INITRD="yes"
fiver@home:~> nvidia-settings -v

nvidia-settings: version 331.20 (buildmeister@swio-display-x64-rhel04-06) Wed Oct
30 18:37:41 PDT 2013
The NVIDIA X Server Settings tool.

This program is used to configure the NVIDIA Linux graphics driver.
For more detail, please see the nvidia-settings(1) man page.

Copyright (C) 2004 - 2010 NVIDIA Corporation.
Показать
fiver@home:~> grep -i driver /var/log/Xorg.0.log
[ 12.225] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 12.225] X.Org Video Driver: 13.1
[ 12.225] X.Org XInput driver : 18.0
[ 12.855] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12.912] Module class: X.Org Video Driver
[ 12.927] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:32:26 PDT 2013
[ 12.927] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.398] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14.467] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 14.868] Module class: X.Org XInput Driver
[ 14.868] ABI class: X.Org XInput driver, version 18.0
[ 14.868] (II) Using input driver 'evdev' for 'Power Button'
[ 14.902] (II) Using input driver 'evdev' for 'Power Button'
[ 14.903] (II) No input driver specified, ignoring this device.
[ 14.903] (II) No input driver specified, ignoring this device.
[ 14.904] (II) No input driver specified, ignoring this device.
[ 14.904] (II) No input driver specified, ignoring this device.
[ 14.905] (II) No input driver specified, ignoring this device.
[ 14.906] (II) No input driver specified, ignoring this device.
[ 14.906] (II) No input driver specified, ignoring this device.
[ 14.906] (II) No input driver specified, ignoring this device.
[ 14.906] (II) Using input driver 'evdev' for 'gspca_pac7302'
[ 14.907] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.908] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 14.909] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 14.918] (II) No input driver specified, ignoring this device.
Показать
fiver@home:~> glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: GeForce 9600 GT/PCIe/SSE2
GL_NV_blend_square, GL_NV_conditional_render, GL_NV_copy_depth_to_color,
GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
GL_NVX_conditional_render, GL_NVX_gpu_memory_info,

И от рута

Показать
home:/home/fiver # cat /etc/default/grub | grep GRUB_CMDLINE_LINUX_DEFAULT
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts"
Показать
home:/home/fiver # cat /boot/grub2/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="${saved_entry}"

if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}

if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1' 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
font="/usr/share/grub2/unicode.pf2"
fi

if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=ru_RU
insmod gettext
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1' 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
insmod gfxmenu
loadfont ($root)/boot/grub2/themes/openSUSE/ascii.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans10.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans12.pf2
loadfont ($root)/boot/grub2/themes/openSUSE/DejaVuSans-Bold14.pf2
insmod png
set theme=($root)/boot/grub2/themes/openSUSE/theme.txt
export theme
if [ x${boot_once} = xtrue ]; then
set timeout=0
elif sleep --interruptible 0 ; then
set timeout=8
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'openSUSE 12.3' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1' 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
echo 'Загружается Linux 3.7.10-1.16-desktop …'
linux /boot/vmlinuz-3.7.10-1.16-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1 nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.7.10-1.16-desktop
}
submenu 'Дополнительные параметры для openSUSE 12.3' $menuentry_id_option 'gnulinux-advanced-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
menuentry 'openSUSE 12.3, с Linux 3.7.10-1.16-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.16-desktop-advanced-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1' 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
echo 'Загружается Linux 3.7.10-1.16-desktop …'
linux /boot/vmlinuz-3.7.10-1.16-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1 nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.7.10-1.16-desktop
}
menuentry 'openSUSE 12.3, с Linux 3.7.10-1.16-desktop (режим восстановления)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.16-desktop-recovery-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1' 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
echo 'Загружается Linux 3.7.10-1.16-desktop …'
linux /boot/vmlinuz-3.7.10-1.16-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.7.10-1.16-desktop
}
menuentry 'openSUSE 12.3, с Linux 3.7.10-1.1-desktop' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.1-desktop-advanced-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1' 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
echo 'Загружается Linux 3.7.10-1.1-desktop …'
linux /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1 nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.7.10-1.1-desktop
}
menuentry 'openSUSE 12.3, с Linux 3.7.10-1.1-desktop (режим восстановления)' --class 'opensuse-12-3' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.7.10-1.1-desktop-recovery-64d2fd61-7ffd-4924-be2e-2011f3b9fdd1' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 --hint='hd0,msdos1' 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
else
search --no-floppy --fs-uuid --set=root 64d2fd61-7ffd-4924-be2e-2011f3b9fdd1
fi
echo 'Загружается Linux 3.7.10-1.1-desktop …'
linux /boot/vmlinuz-3.7.10-1.1-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
echo 'Загружается начальный виртуальный диск …'
initrd /boot/initrd-3.7.10-1.1-desktop
}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/20_ppc_terminfo ###
### END /etc/grub.d/20_ppc_terminfo ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

### BEGIN /etc/grub.d/90_persistent ###
### END /etc/grub.d/90_persistent ###
08.11.2013 18:18 #348063

5iver,
В секцию Monitor файла xorg.conf добавьте:

text

Section "Monitor"

            Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync


EndSection

Там же удалите строку:

text
    Option         "metamodes" "nvidia-auto-select +0+0"

В секцию Screen добавьте:

text

Section "Screen"

 Subsection "Display"
        Depth 8
        Modes  "1280x1024"
    EndSubsection
    
    Subsection "Display"
        Depth 16
        Modes  "1280x1024"
    EndSubsection
    
    Subsection "Display"
        Depth 24
        Modes  "1280x1024"
    EndSubsection
EndSection
08.11.2013 18:21 #348064
"yars" написал:
Если /etc/group доступен на чтение простому пользователю, я балдею :-)
text
verg@localhost:/etc> ls -l group*
-rw-r--r-- 1 root root 733 ноя  8 07:32 group
-rw------- 1 root root 713 окт 29 05:40 group-
-rw-r--r-- 1 root root 741 ноя  8 07:32 group.YaST2save
08.11.2013 18:22 · отредактировано #348065
"5iver" написал:
Section "Monitor"    Identifier     "Monitor0"    VendorName     "Unknown"    ModelName      "CRT-1"

Предположу ,что драйвер не читает EDID монитора
Покажите
cat /var/log/Xorg.0.log
Я выхожу из этой ситуации так:
/etc/X11/xorg.conf.d/50-monitor.conf

Показать
# Having multiple "Monitor" sections is known to be problematic. Make
# sure you don't have in use another one laying around e.g. in another
# xorg.conf.d file or even a generic xorg.conf file. More details can
# be found in https://bugs.freedesktop.org/show_bug.cgi?id=32430.
#
Section "Monitor"
Identifier "Default Monitor"
#
# ## If your monitor doesn't support DDC you may override the
# ## defaults here
HorizSync 28-85
VertRefresh 50-100
DisplaySize 483 272
#
# ## Add your mode lines here, use e.g the cvt tool
#
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
EndSection

/etc/X11/xorg.conf.d/50-screen.conf

Показать
# Having multiple "Screen" sections is known to be problematic. Make
# sure you don't have in use another one laying around e.g. in another
# xorg.conf.d file or even a generic xorg.conf file. More details can
# be found in https://bugs.freedesktop.org/show_bug.cgi?id=32430.
#
Section "Screen"
Identifier "Screen0"
#
Device "Default Device"
Monitor "Default Monitor"
Option "TwinView" "0"
SubSection "Display"
Modes "1920x1080_60"

EndSubSection
# ## Doesn't help for radeon/radeonhd drivers; use magic in
# ## 50-device.conf instead

EndSection

Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync -вывод команды
cvt 1920 1080 60

08.11.2013 18:24 #348067
"Vlad60" написал:
Предположу ,что драйвер не читает EDID монитора

Думаю уже обычная ситуация с CRT.
(з.ы. у себя и на DFP его отключаю)




5iver,
з.ы. c драйвером всё норм.

08.11.2013 18:25 #348069

В том, что безопасность дистрибутива на нуле. Команда чтения /etc/group в нормальных условиях требует прав суперпользователя. И еще, cat+grep уже проходили, так делать нерационально. Достаточно grep.

08.11.2013 18:33 #348070
verg написал:
[quote="Vlad60"]Предположу ,что драйвер не читает EDID монитора

Думаю уже обычная ситуация с CRT.
(з.ы. у себя и на DFP его отключаю)

5iver,
з.ы. c драйвером всё норм.[/quote]

Сделал то, что вы сказали, перезагрузился и ничего не изменилось.
з.ы. ну хоть драйвер нормально поставить смог

Vlad60 написал:
5iver пишет:
Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-1"
Предположу ,что драйвер не читает EDID монитора
Покажите
cat /var/log/Xorg.0.log
Я выхожу из этой ситуации так:
/etc/X11/xorg.conf.d/50-monitor.conf
+ открыть спойлер
/etc/X11/xorg.conf.d/50-screen.conf
+ открыть спойлер
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync -вывод команды
cvt 1920 1080 60

Держите

Показать
fiver@home:~> cat /var/log/Xorg.0.log
[ 13.294]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 13.294] X Protocol Version 11, Revision 0
[ 13.294] Build Operating System: openSUSE SUSE LINUX
[ 13.294] Current Operating System: Linux home 3.7.10-1.16-desktop #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba) i686
[ 13.294] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.16-desktop root=UUID=64d2fd61-7ffd-4924-be2e-2011f3b9fdd1 nomodeset resume=/dev/disk/by-id/ata-WDC_WD2500AAKS-00L9A0_WD-WMAV27420218-part2 splash=silent quiet showopts
[ 13.294] Build Date: 22 October 2013 08:17:03AM
[ 13.294]
[ 13.294] Current version of pixman: 0.28.2
[ 13.294] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.294] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.294] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 9 01:23:39 2013
[ 13.294] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.294] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.294] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.303] (==) ServerLayout "Layout0"
[ 13.303] (**) |-->Screen "Screen0" (0)
[ 13.303] (**) | |-->Monitor "Monitor0"
[ 13.303] (**) | |-->Device "Device0"
[ 13.303] (**) |-->Input Device "Keyboard0"
[ 13.303] (**) |-->Input Device "Mouse0"
[ 13.303] (**) Option "Xinerama" "0"
[ 13.303] (==) Automatically adding devices
[ 13.303] (==) Automatically enabling devices
[ 13.303] (==) Automatically adding GPU devices
[ 13.303] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 13.303] Entry deleted from font path.
[ 13.303] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 13.303] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 13.303] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.303] (WW) Disabling Keyboard0
[ 13.303] (WW) Disabling Mouse0
[ 13.303] (II) Loader magic: 0x8261620
[ 13.303] (II) Module ABI versions:
[ 13.303] X.Org ANSI C Emulation: 0.4
[ 13.303] X.Org Video Driver: 13.1
[ 13.303] X.Org XInput driver : 18.0
[ 13.303] X.Org Server Extension : 7.0
[ 13.304] (--) PCI:*(0:1:0:0) 10de:0622:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 13.304] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.304] Initializing built-in extension Generic Event Extension
[ 13.304] Initializing built-in extension SHAPE
[ 13.304] Initializing built-in extension MIT-SHM
[ 13.304] Initializing built-in extension XInputExtension
[ 13.304] Initializing built-in extension XTEST
[ 13.304] Initializing built-in extension BIG-REQUESTS
[ 13.304] Initializing built-in extension SYNC
[ 13.304] Initializing built-in extension XKEYBOARD
[ 13.304] Initializing built-in extension XC-MISC
[ 13.304] Initializing built-in extension SECURITY
[ 13.304] Initializing built-in extension XINERAMA
[ 13.304] Initializing built-in extension XFIXES
[ 13.304] Initializing built-in extension RENDER
[ 13.304] Initializing built-in extension RANDR
[ 13.304] Initializing built-in extension COMPOSITE
[ 13.304] Initializing built-in extension DAMAGE
[ 13.304] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.304] Initializing built-in extension DOUBLE-BUFFER
[ 13.304] Initializing built-in extension RECORD
[ 13.304] Initializing built-in extension DPMS
[ 13.304] Initializing built-in extension X-Resource
[ 13.304] Initializing built-in extension XVideo
[ 13.304] Initializing built-in extension XVideo-MotionCompensation
[ 13.304] Initializing built-in extension XFree86-VidModeExtension
[ 13.304] Initializing built-in extension XFree86-DGA
[ 13.304] Initializing built-in extension XFree86-DRI
[ 13.304] Initializing built-in extension DRI2
[ 13.304] (II) "glx" will be loaded by default.
[ 13.304] (II) LoadModule: "dri2"
[ 13.305] (II) Module "dri2" already built-in
[ 13.305] (II) LoadModule: "glamoregl"
[ 13.395] (WW) Warning, couldn't open module glamoregl
[ 13.395] (II) UnloadModule: "glamoregl"
[ 13.395] (II) Unloading glamoregl
[ 13.395] (EE) Failed to load module "glamoregl" (module does not exist, 0)
[ 13.395] (II) LoadModule: "glx"
[ 13.395] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.606] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.606] compiled for 4.0.2, module version = 1.0.0
[ 14.606] Module class: X.Org Server Extension
[ 14.606] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:53:40 PDT 2013
[ 14.606] Loading extension GLX
[ 14.606] (II) LoadModule: "nvidia"
[ 14.607] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.607] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.607] compiled for 4.0.2, module version = 1.0.0
[ 14.607] Module class: X.Org Video Driver
[ 14.607] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:32:26 PDT 2013
[ 14.607] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.607] (++) using VT number 7

[ 14.607] (II) Loading sub module "fb"
[ 14.607] (II) LoadModule: "fb"
[ 14.608] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.608] (II) Module fb: vendor="X.Org Foundation"
[ 14.608] compiled for 1.13.2, module version = 1.0.0
[ 14.608] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.608] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 14.608] (II) Loading sub module "wfb"
[ 14.608] (II) LoadModule: "wfb"
[ 14.608] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.609] (II) Module wfb: vendor="X.Org Foundation"
[ 14.609] compiled for 1.13.2, module version = 1.0.0
[ 14.609] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.609] (II) Loading sub module "ramdac"
[ 14.609] (II) LoadModule: "ramdac"
[ 14.609] (II) Module "ramdac" already built-in
[ 14.609] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 14.609] (==) NVIDIA(0): RGB weight 888
[ 14.609] (==) NVIDIA(0): Default visual is TrueColor
[ 14.609] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.609] (**) NVIDIA(0): Option "Stereo" "0"
[ 14.609] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[ 14.609] (**) NVIDIA(0): Option "SLI" "Off"
[ 14.609] (**) NVIDIA(0): Option "MultiGPU" "Off"
[ 14.609] (**) NVIDIA(0): Option "BaseMosaic" "off"
[ 14.609] (**) NVIDIA(0): Stereo disabled by request
[ 14.609] (**) NVIDIA(0): NVIDIA SLI disabled.
[ 14.609] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[ 14.609] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.980] (WW) NVIDIA(0): The EDID read for display device CRT-1 is invalid: the
[ 15.980] (WW) NVIDIA(0): checksum for EDID version 1 is invalid.
[ 15.980] (--) NVIDIA(0):
[ 15.980] (--) NVIDIA(0): Raw EDID bytes:
[ 15.980] (--) NVIDIA(0):
[ 15.980] (--) NVIDIA(0): 00 ff ff ff ff ff ff 00 04 72 2f 00 66 3c 10 82
[ 15.980] (--) NVIDIA(0): 15 12 01 03 6c 22 1b 78 f2 3d 85 a6 56 4a 9a 24
[ 15.980] (--) NVIDIA(0): 12 50 e5 bf ef 00 61 46 71 40 71 4f 81 00 81 40
[ 15.980] (--) NVIDIA(0): 81 4a 81 4f 81 80 30 2a 00 e4 51 00 2a 40 30 70
[ 15.980] (--) NVIDIA(0): 13 00 52 0e 11 00 00 1e 00 e4 03 fd 00 31 4b 1e
[ 15.980] (--) NVIDIA(0): 50 0e e4 0a 20 20 20 20 20 20 00 00 00 fc 00 41
[ 15.980] (--) NVIDIA(0): 63 65 72 20 54 31 37 33 0a 20 20 20 00 00 00 ff
[ 15.980] (--) NVIDIA(0): 00 4c 03 41 30 32 30 3e 31 34 31 30 31 0a 00 ef
[ 15.980] (--) NVIDIA(0):
[ 15.980] (--) NVIDIA(0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.980] (--) NVIDIA(0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.980] (--) NVIDIA(0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.980] (--) NVIDIA(0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.980] (--) NVIDIA(0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.980] (--) NVIDIA(0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.980] (--) NVIDIA(0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.980] (--) NVIDIA(0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.980] (--) NVIDIA(0):
[ 16.047] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[ 16.047] (--) NVIDIA(0): Memory: 524288 kBytes
[ 16.047] (--) NVIDIA(0): VideoBIOS: 62.94.82.00.00
[ 16.047] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 16.050] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[ 16.050] (--) NVIDIA(0): CRT-0
[ 16.050] (--) NVIDIA(0): CRT-1 (boot, connected)
[ 16.050] (--) NVIDIA(0): DFP-0
[ 16.050] (--) NVIDIA(0): DFP-1
[ 16.050] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 16.050] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 16.050] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 16.050] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 16.050] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 16.050] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 16.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.050] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 16.050] (**) NVIDIA(0): all display devices.)
[ 16.052] (==) NVIDIA(0):
[ 16.052] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 16.052] (==) NVIDIA(0): will be used as the requested mode.
[ 16.052] (==) NVIDIA(0):
[ 16.052] (II) NVIDIA(0): Validated MetaModes:
[ 16.052] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 16.052] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 16.074] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 16.074] (WW) NVIDIA(0): from CRT-1's EDID.
[ 16.074] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 16.074] (--) Depth 24 pixmap format is 32 bpp
[ 16.074] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 16.077] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 16.077] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 16.077] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 16.077] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 16.077] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 16.077] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 16.077] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 16.077] (II) NVIDIA(0): Config Options in the README.
[ 16.079] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 16.110] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 16.110] Loading extension NV-GLX
[ 16.119] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 16.119] (==) NVIDIA(0): Backing store disabled
[ 16.119] (==) NVIDIA(0): Silken mouse enabled
[ 16.119] (**) NVIDIA(0): DPMS enabled
[ 16.119] Loading extension NV-CONTROL
[ 16.119] Loading extension XINERAMA
[ 16.119] (II) Loading sub module "dri2"
[ 16.119] (II) LoadModule: "dri2"
[ 16.119] (II) Module "dri2" already built-in
[ 16.119] (II) NVIDIA(0): [DRI2] Setup complete
[ 16.119] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 16.119] (--) RandR disabled
[ 16.127] (II) Initializing extension GLX
[ 16.206] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.206] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.206] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.206] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 16.206] (II) LoadModule: "evdev"
[ 16.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.207] (II) Module evdev: vendor="X.Org Foundation"
[ 16.207] compiled for 1.13.1, module version = 2.7.3
[ 16.207] Module class: X.Org XInput Driver
[ 16.207] ABI class: X.Org XInput driver, version 18.0
[ 16.207] (II) Using input driver 'evdev' for 'Power Button'
[ 16.207] (**) Power Button: always reports core events
[ 16.208] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.208] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.208] (--) evdev: Power Button: Found keys
[ 16.208] (II) evdev: Power Button: Configuring as keyboard
[ 16.208] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 16.208] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.208] (**) Option "xkb_rules" "evdev"
[ 16.208] (**) Option "xkb_model" "evdev"
[ 16.208] (**) Option "xkb_layout" "us,ru"
[ 16.208] (**) Option "xkb_variant" ",winkeys"
[ 16.208] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 16.242] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 16.242] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.242] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.242] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 16.242] (II) Using input driver 'evdev' for 'Power Button'
[ 16.242] (**) Power Button: always reports core events
[ 16.242] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 16.242] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.242] (--) evdev: Power Button: Found keys
[ 16.242] (II) evdev: Power Button: Configuring as keyboard
[ 16.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 16.242] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.242] (**) Option "xkb_rules" "evdev"
[ 16.242] (**) Option "xkb_model" "evdev"
[ 16.242] (**) Option "xkb_layout" "us,ru"
[ 16.242] (**) Option "xkb_variant" ",winkeys"
[ 16.242] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 16.242] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)
[ 16.242] (II) No input driver specified, ignoring this device.
[ 16.242] (II) This device may have been added with another device file.
[ 16.243] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[ 16.243] (II) No input driver specified, ignoring this device.
[ 16.243] (II) This device may have been added with another device file.
[ 16.243] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12)
[ 16.243] (II) No input driver specified, ignoring this device.
[ 16.243] (II) This device may have been added with another device file.
[ 16.243] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[ 16.243] (II) No input driver specified, ignoring this device.
[ 16.243] (II) This device may have been added with another device file.
[ 16.243] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 16.243] (II) No input driver specified, ignoring this device.
[ 16.243] (II) This device may have been added with another device file.
[ 16.243] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 16.243] (II) No input driver specified, ignoring this device.
[ 16.243] (II) This device may have been added with another device file.
[ 16.244] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event8)
[ 16.244] (II) No input driver specified, ignoring this device.
[ 16.244] (II) This device may have been added with another device file.
[ 16.244] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event9)
[ 16.244] (II) No input driver specified, ignoring this device.
[ 16.244] (II) This device may have been added with another device file.
[ 16.244] (II) config/udev: Adding input device gspca_pac7302 (/dev/input/event13)
[ 16.244] (**) gspca_pac7302: Applying InputClass "evdev keyboard catchall"
[ 16.244] (**) gspca_pac7302: Applying InputClass "evdev keyboard catchall"
[ 16.244] (**) gspca_pac7302: Applying InputClass "LocalKeyboard"
[ 16.244] (II) Using input driver 'evdev' for 'gspca_pac7302'
[ 16.244] (**) gspca_pac7302: always reports core events
[ 16.244] (**) evdev: gspca_pac7302: Device: "/dev/input/event13"
[ 16.244] (--) evdev: gspca_pac7302: Vendor 0x93a Product 0x2622
[ 16.244] (--) evdev: gspca_pac7302: Found keys
[ 16.244] (II) evdev: gspca_pac7302: Configuring as keyboard
[ 16.244] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/input/input13/event13"
[ 16.244] (II) XINPUT: Adding extended input device "gspca_pac7302" (type: KEYBOARD, id 8)
[ 16.244] (**) Option "xkb_rules" "evdev"
[ 16.244] (**) Option "xkb_model" "evdev"
[ 16.244] (**) Option "xkb_layout" "us,ru"
[ 16.244] (**) Option "xkb_variant" ",winkeys"
[ 16.244] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 16.245] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 16.245] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.245] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.245] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 16.245] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.245] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.245] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 16.245] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.245] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.245] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.245] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 16.245] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 16.245] (**) Option "xkb_rules" "evdev"
[ 16.245] (**) Option "xkb_model" "evdev"
[ 16.245] (**) Option "xkb_layout" "us,ru"
[ 16.245] (**) Option "xkb_variant" ",winkeys"
[ 16.245] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[ 16.245] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event1)
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "ImPS/2 Generic Wheel Mouse"
[ 16.246] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event1"
[ 16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 16.246] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 16.246] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 16.246] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 16.246] (**) Option "Emulate3Buttons" "on"
[ 16.246] (**) Option "EmulateWheel" "on"
[ 16.246] (**) Option "EmulateWheelButton" "2"
[ 16.246] (**) Option "EmulateWheelTimeout" "200"
[ 16.246] (**) Option "YAxisMapping" "4 5"
[ 16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 16.246] (**) Option "XAxisMapping" "6 7"
[ 16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: XAxisMapping: buttons 6 and 7
[ 16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.246] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[ 16.246] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[ 16.246] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 16.246] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "ImPS/2 Generic Wheel Mouse"
[ 16.246] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 16.246] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 16.246] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/mouse0"
[ 16.246] (EE) ImPS/2 Generic Wheel Mouse: Couldn't open mtdev device
[ 16.257] (EE) evdev: ImPS/2 Generic Wheel Mouse: ioctl EVIOCGID failed: Bad file descriptor
[ 16.257] (EE) PreInit returned 8 for "ImPS/2 Generic Wheel Mouse"
[ 16.257] (II) UnloadModule: "evdev"
[ 16.257] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 16.257] (II) No input driver specified, ignoring this device.
[ 16.257] (II) This device may have been added with another device file.
[ 28.869] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[ 28.869] (WW) NVIDIA(GPU-0): checksum for EDID version 1 is invalid.
[ 28.869] (--) NVIDIA(GPU-0):
[ 28.869] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 28.869] (--) NVIDIA(GPU-0):
[ 28.869] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 04 72 2f 00 66 3c 10 82
[ 28.869] (--) NVIDIA(GPU-0): 15 12 01 03 6c 22 1b 78 f2 3d 85 a6 56 4a 9a 24
[ 28.869] (--) NVIDIA(GPU-0): 12 50 e5 bf ef 00 61 46 71 40 71 4f 81 00 81 40
[ 28.869] (--) NVIDIA(GPU-0): 81 4a 81 4f 81 80 30 2a 00 e4 51 00 2a 40 30 70
[ 28.869] (--) NVIDIA(GPU-0): 13 00 52 0e 11 00 00 1e 00 e4 03 fd 00 31 4b 1e
[ 28.869] (--) NVIDIA(GPU-0): 50 0e e4 0a 20 20 20 20 20 20 00 00 00 fc 00 41
[ 28.869] (--) NVIDIA(GPU-0): 63 65 72 20 54 31 37 33 0a 20 20 20 00 00 00 ff
[ 28.869] (--) NVIDIA(GPU-0): 00 4c 03 41 30 32 30 3e 31 34 31 30 31 0a 00 ef
[ 28.869] (--) NVIDIA(GPU-0):
[ 28.869] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 28.869] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 28.869] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 28.869] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 28.869] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 28.869] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 28.869] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 28.869] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 28.869] (--) NVIDIA(GPU-0):
[ 28.869] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 28.869] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 28.869] (**) NVIDIA(0): all display devices.)
[ 31.971] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[ 31.971] (WW) NVIDIA(GPU-0): checksum for EDID version 1 is invalid.
[ 31.971] (--) NVIDIA(GPU-0):
[ 31.971] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 31.971] (--) NVIDIA(GPU-0):
[ 31.971] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 04 72 2f 00 66 3c 10 82
[ 31.971] (--) NVIDIA(GPU-0): 15 12 01 03 6c 22 1b 78 f2 3d 85 a6 56 4a 9a 24
[ 31.971] (--) NVIDIA(GPU-0): 12 50 e5 bf ef 00 61 46 71 40 71 4f 81 00 81 40
[ 31.971] (--) NVIDIA(GPU-0): 81 4a 81 4f 81 80 30 2a 00 e4 51 00 2a 40 30 70
[ 31.971] (--) NVIDIA(GPU-0): 13 00 52 0e 11 00 00 1e 00 e4 03 fd 00 31 4b 1e
[ 31.971] (--) NVIDIA(GPU-0): 50 0e e4 0a 20 20 20 20 20 20 00 00 00 fc 00 41
[ 31.971] (--) NVIDIA(GPU-0): 63 65 72 20 54 31 37 33 0a 20 20 20 00 00 00 ff
[ 31.971] (--) NVIDIA(GPU-0): 00 4c 03 41 30 32 30 3e 31 34 31 30 31 0a 00 ef
[ 31.971] (--) NVIDIA(GPU-0):
[ 31.971] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.971] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.971] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.971] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.971] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.971] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.971] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.971] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 31.971] (--) NVIDIA(GPU-0):
[ 31.971] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.971] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 31.971] (**) NVIDIA(0): all display devices.)
[ 42.477] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[ 42.477] (WW) NVIDIA(GPU-0): checksum for EDID version 1 is invalid.
[ 42.477] (--) NVIDIA(GPU-0):
[ 42.477] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 42.477] (--) NVIDIA(GPU-0):
[ 42.477] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 04 72 2f 00 66 3c 10 82
[ 42.477] (--) NVIDIA(GPU-0): 15 12 01 03 6c 22 1b 78 f2 3d 85 a6 56 4a 9a 24
[ 42.477] (--) NVIDIA(GPU-0): 12 50 e5 bf ef 00 61 46 71 40 71 4f 81 00 81 40
[ 42.477] (--) NVIDIA(GPU-0): 81 4a 81 4f 81 80 30 2a 00 e4 51 00 2a 40 30 70
[ 42.477] (--) NVIDIA(GPU-0): 13 00 52 0e 11 00 00 1e 00 e4 03 fd 00 31 4b 1e
[ 42.477] (--) NVIDIA(GPU-0): 50 0e e4 0a 20 20 20 20 20 20 00 00 00 fc 00 41
[ 42.477] (--) NVIDIA(GPU-0): 63 65 72 20 54 31 37 33 0a 20 20 20 00 00 00 ff
[ 42.477] (--) NVIDIA(GPU-0): 00 4c 03 41 30 32 30 3e 31 34 31 30 31 0a 00 ef
[ 42.477] (--) NVIDIA(GPU-0):
[ 42.477] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.477] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.477] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.477] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.477] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.477] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.477] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.477] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 42.477] (--) NVIDIA(GPU-0):
[ 42.477] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 42.477] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 42.477] (**) NVIDIA(0): all display devices.)
[ 52.846] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[ 52.846] (WW) NVIDIA(GPU-0): checksum for EDID version 1 is invalid.
[ 52.846] (--) NVIDIA(GPU-0):
[ 52.846] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 52.846] (--) NVIDIA(GPU-0):
[ 52.846] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 04 72 2f 00 66 3c 10 82
[ 52.846] (--) NVIDIA(GPU-0): 15 12 01 03 6c 22 1b 78 f2 3d 85 a6 56 4a 9a 24
[ 52.846] (--) NVIDIA(GPU-0): 12 50 e5 bf ef 00 61 46 71 40 71 4f 81 00 81 40
[ 52.846] (--) NVIDIA(GPU-0): 81 4a 81 4f 81 80 30 2a 00 e4 51 00 2a 40 30 70
[ 52.846] (--) NVIDIA(GPU-0): 13 00 52 0e 11 00 00 1e 00 e4 03 fd 00 31 4b 1e
[ 52.846] (--) NVIDIA(GPU-0): 50 0e e4 0a 20 20 20 20 20 20 00 00 00 fc 00 41
[ 52.846] (--) NVIDIA(GPU-0): 63 65 72 20 54 31 37 33 0a 20 20 20 00 00 00 ff
[ 52.846] (--) NVIDIA(GPU-0): 00 4c 03 41 30 32 30 3e 31 34 31 30 31 0a 00 ef
[ 52.846] (--) NVIDIA(GPU-0):
[ 52.846] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.846] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.846] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.846] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.846] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.846] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.846] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.846] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.846] (--) NVIDIA(GPU-0):
[ 52.846] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 52.846] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 52.846] (**) NVIDIA(0): all display devices.)
08.11.2013 18:37 #348072

5iver,
Из сообщения 13 проделали?
(мы же юзаем один файл xorg.conf)

08.11.2013 18:52 #348078
verg написал:
5iver,
Из сообщения 13 проделали?
(мы же юзаем один файл xorg.conf)

Да я про 13 пост. Сейчас еще раз все проверил и обнаружил в в секции Screen вот такую записть

text
 Subsection "Display"
        Depth 24
       EndSubsection

Удалил её, перезагрузился и наконец-то все заработало. Большое спасибо Вам и всем кто помогал мне.
Получается проблема была в том что

vlad60 написал:
Предположу ,что драйвер не читает EDID монитора

т.е. чисто теоретически, если бы я подключил другой монитор все могло бы заработать без правки xorg.conf?
Не подскажите это косяк монитора или драйвера?

Войдите или зарегистрируйтесь, чтобы ответить.