suse 12.3(уже 13.1) Hp620 глюк после ждущего режима

 sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +16.0°C  (crit = +108.0°C)
temp2:        +45.0°C  (crit = +105.0°C)
temp3:        +47.0°C  (crit = +108.0°C)
temp4:        +38.0°C  (crit = +105.0°C)
temp5:        +24.4°C  (crit = +108.0°C)
temp6:        +30.0°C  (crit = +110.0°C)

sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +16.0°C  (crit = +108.0°C)
temp2:        +43.0°C  (crit = +105.0°C)
temp3:        +52.0°C  (crit = +108.0°C)
temp4:        +38.0°C  (crit = +105.0°C)
temp5:        +24.6°C  (crit = +108.0°C)
temp6:        +90.0°C  (crit = +110.0°C)

sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +16.0°C  (crit = +108.0°C)
temp2:        +48.0°C  (crit = +105.0°C)
temp3:        +44.0°C  (crit = +108.0°C)
temp4:        +38.0°C  (crit = +105.0°C)
temp5:        +25.3°C  (crit = +108.0°C)
temp6:        +90.0°C  (crit = +110.0°C)

Thermal 0: ok, 90.0 degrees C
Thermal 1: ok, 25.3 degrees C
Thermal 2: ok, 38.0 degrees C
Thermal 3: ok, 42.0 degrees C
Thermal 4: ok, 48.0 degrees C
Thermal 5: ok, 16.0 degrees C

sensors-detect 
# sensors-detect revision 6085 (2012-10-30 18:18:45 +0100)
# System: Hewlett-Packard HP 620 [F.0A] (laptop)
# Board: Hewlett-Packard 1526
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     Yes
Found `SMSC FDC37B72x Super IO'                             
    (no hardware monitoring capabilities)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.
Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively): y
Next adapter: DPDDC-B (i2c-6)
Do you want to scan it? (YES/no/selectively): y
Next adapter: DPDDC-D (i2c-7)
Do you want to scan it? (YES/no/selectively): y
Now follows a summary of the probes I have just done.
Just press ENTER to continue: 
Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): y
Copy prog/init/lm_sensors.service to /lib/systemd/system
and run 'systemctl enable lm_sensors.service'
for initialization at boot time.
Unloading i2c-dev... OK
Unloading cpuid... OK

cd /etc/init.d/
sudo ./lm_sensors stop
sudo sh -x lm_sensors start

h -x lm_sensors start
+ CONFIG=/etc/sysconfig/lm_sensors
+ LOCK=/var/run/lm_sensors.lock
+ PSENSORS=/usr/bin/sensors
+ FANCONFIG=/etc/fancontrol
+ PFAN=/usr/sbin/fancontrol
+ . /etc/rc.status
++ test -z ''
++ /bin/mountpoint -q /sys/fs/cgroup/systemd
++ test 11513 -ne 1 -a 1 -eq 1
++ _rc_base=
++ case "$0" in
++ case "$1" in
++ echo 'redirecting to systemctl  start '
redirecting to systemctl  start 
++ test -n '' -a -x /bin/systemctl
++ unset _rc_base
++ test -z '' -a -x /sbin/showconsole
+++ /sbin/showconsole
++ REDIRECT=/dev/tty7
++ test -z ''
++ CONSOLE=/dev/console
++ export REDIRECT CONSOLE
++ LC_ALL=POSIX
++ export LC_ALL
++ trap rc_lc SIGWINCH
++ test -n '' -a -n ''
++ rc_lc
++ test -n /dev/tty7
+++ stty size
++ set -- 48 170
++ LINES=48
++ COLUMNS=170
++ test 48 -eq 0 -o 170 -eq 0
++ export LINES COLUMNS
++ case ":$PATH:" in
++ test -t 1 -a xterm '!=' raw -a xterm '!=' dumb
+++ echo -en '\033'
++ esc=$'\E'
++ extd=''
++ warn=''
++ done=''
++ attn=''
+++ echo -en '\017'
++ norm=''
+++ echo -en '\015                                                                                                 '
++ stat='                                                                                                          '
++ rc_done='                                                                                                       done'
++ rc_running='                                                                                                    running'
++ rc_failed='                                                                                                     failed'
++ rc_missed='                                                                                                     missing'
++ rc_skipped='                                                                                                    skipped'
++ rc_dead='                                                                                                       dead'
++ rc_unused='                                                                                                     unused'
++ rc_unknown='                                                                                                    failed''
++ rc_reset=''p='
++ rc_save=''
++ rc_restor'='
++ _rc_service=lm_sensors
++ _rc_status=0
++ _rc_status_all=0
++ _rc_todo=start
++ test start = status
++ test -n start
++ cmdline=
+ rc_reset
+ _rc_status=0
+ _rc_status_all=0
+ rc_check
+ _rc_status_ret=0
+ test 0 -eq 0
+ test 0 -eq 0
+ return 0
+ return 0
+ case "$1" in
+ start
+ echo -n 'Starting up sensors'
Starting up sensors+ unset
+ test -r /etc/sysconfig/lm_sensors
+ . /etc/sysconfig/lm_sensors
++ HWMON_MODULES=coretemp
++ MODULE_0=coretemp
+ for i in '${!MODULE_*}'
+ eval 'module=$MODULE_0'
++ module=coretemp
+ /sbin/modprobe coretemp
+ rc_status
+ rc_check
+ _rc_status_ret=0
+ test 0 -eq 0
+ test 0 -eq 0
+ return 0
+ test 0 -gt 7
+ _rc_status_ret=0
+ case "$_rc_todo" in
+ local i
+ return 0
+ rc_status
+ rc_check
+ _rc_status_ret=0
+ test 0 -eq 0
+ test 0 -eq 0
+ return 0
+ test 0 -gt 7
+ _rc_status_ret=0
+ case "$_rc_todo" in
+ local i
+ return 0
+ /usr/bin/sensors -s
+ rc_status
+ rc_check
+ _rc_status_ret=0
+ test 0 -eq 0
+ test 0 -eq 0
+ return 0
+ test 0 -gt 7
+ _rc_status_ret=0
+ case "$_rc_todo" in
+ local i
+ return 0
+ test -s /etc/fancontrol -a -x /usr/sbin/fancontrol
+ echo -n ': '
: + rc_status -v
+ rc_check
+ _rc_status_ret=0
+ test 0 -eq 0
+ test 0 -eq 0
+ return 0
+ test 0 -gt 7
+ _rc_status_ret=0
+ case "$_rc_todo" in
+ local i
+ for i in '"$@"'
+ case "$i" in
+ local vrt=
+ local out=1
+ local opt=en
+ test -n ''
+ opt=e
+ case "$_rc_status" in
+ vrt='                                                                                                            done'
+ echo -e ''                                                                                                       done
                                                                                                                   done
+ _rc_status=0
+ return 0
+ touch /var/run/lm_sensors.lock
+ rc_exit
+ exit 0

acpitz-virtual-0
Adapter: Virtual device
temp1:        +16.0°C  (crit = +108.0°C)
temp2:        +37.0°C  (crit = +105.0°C)
temp3:        +42.0°C  (crit = +108.0°C)
temp4:        +37.0°C  (crit = +105.0°C)
temp5:        +28.8°C  (crit = +108.0°C)
temp6:        +90.0°C  (crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +43.0°C  (high = +105.0°C, crit = +105.0°C)
Core 1:       +43.0°C  (high = +105.0°C, crit = +105.0°C)

sudo /sbin/modprobe -r coretemp
sudo systemctl restart  lm_sensors.service
или
cd /etc/init.d/
sudo ./lm_sensors restart

[    3.113577] thermal LNXTHERM:00: registered as thermal_zone0
[    3.113581] ACPI: Thermal Zone [GFXZ] (16 C)
[    3.113698] ACPI: Fan [FAN6] (off)
[    3.113787] ACPI: Fan [FAN7] (off)
[    3.113870] ACPI: Fan [FAN8] (off)
[    3.113951] ACPI: Fan [FAN9] (off)
[    3.114047] ACPI: Fan [FANA] (off)
[    3.114132] ACPI: Fan [FANB] (off)
[    3.114186] ACPI: Fan [FANG] (off)
[    3.114270] ACPI: Fan [FAN0] (off)
[    3.114348] ACPI: Fan [FAN1] (off)
[    3.114428] ACPI: Fan [FAN2] (off)
[    3.114507] ACPI: Fan [FAN3] (off)
[    3.114586] ACPI: Fan [FAN4] (off)
[    3.114661] ACPI: Fan [FAN5] (off)
[    3.126305] thermal LNXTHERM:01: registered as thermal_zone1
[    3.126309] ACPI: Thermal Zone [DTSZ] (50 C)
[    3.140584] thermal LNXTHERM:02: registered as thermal_zone2
[    3.140587] ACPI: Thermal Zone [CPUZ] (52 C)
[    3.144107] thermal LNXTHERM:03: registered as thermal_zone3
[    3.144110] ACPI: Thermal Zone [SKNZ] (42 C)
[    3.154827] thermal LNXTHERM:04: registered as thermal_zone4
[    3.154830] ACPI: Thermal Zone [BATZ] (27 C)
[    3.159569] thermal LNXTHERM:05: registered as thermal_zone5
[    3.159572] ACPI: Thermal Zone [FDTZ] (31 C)

echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:00/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:01/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:02/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:03/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:04/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:05/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:06/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:07/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:08/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:09/thermal_cooling/cur_state
echo 0 > /sys/bus/acpi/drivers/fan/PNP0C0B\:0a/thermal_cooling/cur_state