Добрый день!
Проблема в следующем - в половине случаев прии запуске системы
происходит полное зависание на этапе:
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Пробовал ставить и 32-х и 64-х разрядные дистрибутивы, загружаться в режиме
восстановления, устанавливать систему с безопасными параметрами.
Не помогает - в половине случаев система также виснет на одном и том же этапе.
Материнская плата - ASRock P43DE. пробовал сбрасывать настройки bios -
результат тот же.
openSUSE Linux 12.2 зависает при запуске
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
То, что Вы показали это вполне нормальное явление. Вы конечно же можете попробовать занести в черный список сторожевика, но это вряд ли поможет, поскольку он не ругается. Проверьте, если реакция в системе, заслав единичку, т.е. приблизительно через 30с. система должна перезагрузиться:
1 > /dev/watchdog
Да и еще, покажите: dmesg
в случае успешного запуска 1 > /dev/watchdog срабаьывает - система перезагружается через 30 сек.
dmesg влчуае успешного запуска:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.11-2.16-desktop (geeko@buildhost) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Wed Sep 26 17:05:00 UTC 2012 (259fc87)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.11-2.16-desktop root=UUID=8f70bce1-1d94-4c82-9d9d-4f483a1c54e9 video=1280x1024 resume=/dev/disk/by-id/ata-MAXTOR_STM3250310AS_9RY2W8VA-part1 showopts noresume
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097800 (usable)
[ 0.000000] BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dbfb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dbfb0000 - 00000000dbfc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dbfc0000 - 00000000dbff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dbff0000 - 00000000dc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000124000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P43DE, BIOS P1.70 05/27/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x124000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FFC000000 write-back
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdbfb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000092000] 92000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dbfb0000
[ 0.000000] 0000000000 - 00dbe00000 page 2M
[ 0.000000] 00dbe00000 - 00dbfb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dbfb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000124000000
[ 0.000000] 0100000000 - 0124000000 page 2M
[ 0.000000] kernel direct mapping tables up to 124000000 @ dbfaa000-dbfb0000
[ 0.000000] RAMDISK: 35f78000 - 36fb4000
[ 0.000000] ACPI: RSDP 00000000000f9cd0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000dbfb0000 00038 (v01 052710 RSDT1220 20100527 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000dbfb0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000dbfb0440 05633 (v01 AS170 AS170162 00000162 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dbfc0000 00040
[ 0.000000] ACPI: APIC 00000000dbfb0390 0006C (v01 052710 APIC1220 20100527 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000dbfb0400 0003C (v01 052710 OEMMCFG 20100527 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000dbfc0040 00073 (v01 052710 OEMB1220 20100527 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000dbfb8440 00027 (v01 052710 OEMAAFT 20100527 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000124000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000124000000
[ 0.000000] NODE_DATA [0000000123fec000 - 0000000123ffffff]
[ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff88011f400000-ffff880122ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00124000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x000dbfb0
[ 0.000000] 0: 0x00100000 -> 0x00124000
[ 0.000000] On node 0 totalpages: 1048375
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 882664 pages, LIFO batch:31
[ 0.000000] Normal zone: 2016 pages used for memmap
[ 0.000000] Normal zone: 145440 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dbfb0000 - 00000000dbfc0000
[ 0.000000] PM: Registered nosave memory: 00000000dbfc0000 - 00000000dbff0000
[ 0.000000] PM: Registered nosave memory: 00000000dbff0000 - 00000000dc000000
[ 0.000000] PM: Registered nosave memory: 00000000dc000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dc000000 (gap: dc000000:22e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880123c00000 s80256 r8192 d22144 u524288
[ 0.000000] pcpu-alloc: s80256 r8192 d22144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032018
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.11-2.16-desktop root=UUID=8f70bce1-1d94-4c82-9d9d-4f483a1c54e9 video=1280x1024 resume=/dev/disk/by-id/ata-MAXTOR_STM3250310AS_9RY2W8VA-part1 showopts noresume
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 4034808k/4784128k available (5728k kernel code, 590628k absent, 158692k reserved, 5203k data, 944k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 17301504 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2500.045 MHz processor.
[ 0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.09 BogoMIPS (lpj=2500045)
[ 0.002073] pid_max: default: 32768 minimum: 301
[ 0.002184] Security Framework initialized
[ 0.002275] AppArmor: AppArmor initialized
[ 0.002662] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004914] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006028] Mount-cache hash table entries: 256
[ 0.006321] Initializing cgroup subsys cpuacct
[ 0.006396] Initializing cgroup subsys memory
[ 0.006488] Initializing cgroup subsys devices
[ 0.006561] Initializing cgroup subsys freezer
[ 0.006633] Initializing cgroup subsys net_cls
[ 0.006705] Initializing cgroup subsys blkio
[ 0.006783] Initializing cgroup subsys perf_event
[ 0.006886] CPU: Physical Processor ID: 0
[ 0.006958] CPU: Processor Core ID: 0
[ 0.007007] mce: CPU supports 6 MCE banks
[ 0.007087] CPU0: Thermal monitoring enabled (TM1)
[ 0.007161] using mwait in idle threads.
[ 0.008323] ACPI: Core revision 20120320
[ 0.011434] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.021832] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.022998] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.022998] ... version: 2
[ 0.022998] ... bit width: 40
[ 0.022998] ... generic registers: 2
[ 0.022998] ... value mask: 000000ffffffffff
[ 0.022998] ... max period: 000000007fffffff
[ 0.022998] ... fixed-purpose events: 3
[ 0.022998] ... event mask: 0000000700000003
[ 0.030225] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.036013] Booting Node 0, Processors #1
[ 0.048034] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.048227] Brought up 2 CPUs
[ 0.048299] Total of 2 processors activated (10000.18 BogoMIPS).
[ 0.050024] devtmpfs: initialized
[ 0.051064] PM: Registering ACPI NVS region [mem 0xdbfc0000-0xdbfeffff] (196608 bytes)
[ 0.051178] RTC time: 4:44:38, date: 12/01/12
[ 0.051289] NET: Registered protocol family 16
[ 0.051568] ACPI: bus type pci registered
[ 0.051692] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.051998] PCI: not using MMCONFIG
[ 0.052069] PCI: Using configuration type 1 for base access
[ 0.053038] bio: create slab <bio-0> at 0
[ 0.053038] ACPI: Added _OSI(Module Device)
[ 0.053105] ACPI: Added _OSI(Processor Device)
[ 0.053177] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.053250] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.054493] ACPI: EC: Look up EC in DSDT
[ 0.055724] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.058196] ACPI: Interpreter enabled
[ 0.058270] ACPI: (supports S0 S1 S4 S5)
[ 0.058487] ACPI: Using IOAPIC for interrupt routing
[ 0.058581] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.060151] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.074184] ACPI: No dock devices found.
[ 0.074259] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.074556] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.074794] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.074870] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.074945] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.074995] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.075105] pci_root PNP0A08:00: host bridge window [mem 0xdc000000-0xf7ffffff]
[ 0.075214] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfed8ffff]
[ 0.075353] PCI host bridge to bus 0000:00
[ 0.075425] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.075499] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.075574] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.075648] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.075723] pci_bus 0000:00: root bus resource [mem 0xdc000000-0xf7ffffff]
[ 0.075798] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
[ 0.075881] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[ 0.075923] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[ 0.076026] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.076064] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.076103] pci 0000:00:1a.0: reg 20: [io 0x9400-0x941f]
[ 0.076152] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.076192] pci 0000:00:1a.1: reg 20: [io 0x9480-0x949f]
[ 0.076240] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.076279] pci 0000:00:1a.2: reg 20: [io 0x9800-0x981f]
[ 0.076335] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.076354] pci 0000:00:1a.7: reg 10: [mem 0xf3dff400-0xf3dff7ff]
[ 0.076438] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.076463] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.076477] pci 0000:00:1b.0: reg 10: [mem 0xf3df8000-0xf3dfbfff 64bit]
[ 0.076538] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.076559] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.076623] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.076645] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
[ 0.076708] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.076733] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[ 0.076796] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.076820] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.076859] pci 0000:00:1d.0: reg 20: [io 0x9880-0x989f]
[ 0.076907] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.076947] pci 0000:00:1d.1: reg 20: [io 0x9c00-0x9c1f]
[ 0.077000] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.077039] pci 0000:00:1d.2: reg 20: [io 0xa000-0xa01f]
[ 0.077096] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.077115] pci 0000:00:1d.7: reg 10: [mem 0xf3dff800-0xf3dffbff]
[ 0.077199] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.077220] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.077279] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
[ 0.077387] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
[ 0.077401] pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07]
[ 0.077409] pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883]
[ 0.077416] pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807]
[ 0.077423] pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483]
[ 0.077430] pci 0000:00:1f.2: reg 20: [io 0xa400-0xa40f]
[ 0.077438] pci 0000:00:1f.2: reg 24: [io 0xa080-0xa08f]
[ 0.077481] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.077495] pci 0000:00:1f.3: reg 10: [mem 0xf3dffc00-0xf3dffcff 64bit]
[ 0.077514] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.077546] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 0.077560] pci 0000:00:1f.5: reg 10: [io 0xbc00-0xbc07]
[ 0.077567] pci 0000:00:1f.5: reg 14: [io 0xb880-0xb883]
[ 0.077574] pci 0000:00:1f.5: reg 18: [io 0xb800-0xb807]
[ 0.077581] pci 0000:00:1f.5: reg 1c: [io 0xb480-0xb483]
[ 0.077589] pci 0000:00:1f.5: reg 20: [io 0xb400-0xb40f]
[ 0.077596] pci 0000:00:1f.5: reg 24: [io 0xb080-0xb08f]
[ 0.077667] pci 0000:05:00.0: [10de:0641] type 00 class 0x030000
[ 0.077677] pci 0000:05:00.0: reg 10: [mem 0xf7000000-0xf7ffffff]
[ 0.077687] pci 0000:05:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.077698] pci 0000:05:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.077705] pci 0000:05:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.077712] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.077767] pci 0000:00:01.0: PCI bridge to [bus 05-05]
[ 0.077841] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.077844] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.077848] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.077884] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.077963] pci 0000:00:1c.0: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.078022] pci 0000:03:00.0: [1106:0415] type 00 class 0x010185
[ 0.078038] pci 0000:03:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.078050] pci 0000:03:00.0: reg 14: [io 0xd880-0xd883]
[ 0.078061] pci 0000:03:00.0: reg 18: [io 0xd800-0xd807]
[ 0.078073] pci 0000:03:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.078084] pci 0000:03:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.078106] pci 0000:03:00.0: reg 30: [mem 0xf3ff0000-0xf3ffffff pref]
[ 0.078160] pci 0000:03:00.0: supports D1 D2
[ 0.078162] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.080006] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.080081] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.080085] pci 0000:00:1c.1: bridge window [mem 0xf3f00000-0xf3ffffff]
[ 0.080143] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.080158] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.080185] pci 0000:02:00.0: reg 18: [mem 0xdfeff000-0xdfefffff 64bit pref]
[ 0.080202] pci 0000:02:00.0: reg 20: [mem 0xdfef8000-0xdfefbfff 64bit pref]
[ 0.080214] pci 0000:02:00.0: reg 30: [mem 0xf3ee0000-0xf3efffff pref]
[ 0.080276] pci 0000:02:00.0: supports D1 D2
[ 0.080277] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082005] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.082080] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.082084] pci 0000:00:1c.5: bridge window [mem 0xf3e00000-0xf3efffff]
[ 0.082089] pci 0000:00:1c.5: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.082145] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.082227] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.082229] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.082232] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.082234] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.082236] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xf7ffffff] (subtractive decode)
[ 0.082238] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[ 0.082259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.082360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.082394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.082476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.082507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.082552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.082673] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.083006] pci0000:00: ACPI _OSC control (0x1c) granted
[ 0.087665] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.088140] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.089039] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.089521] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.090039] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.090621] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.091105] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.091587] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.092040] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.092126] vgaarb: loaded
[ 0.092196] vgaarb: bridge control possible 0000:05:00.0
[ 0.092373] SCSI subsystem initialized
[ 0.092451] libata version 3.00 loaded.
[ 0.092451] usbcore: registered new interface driver usbfs
[ 0.092451] usbcore: registered new interface driver hub
[ 0.092451] usbcore: registered new device driver usb
[ 0.092451] PCI: Using ACPI for IRQ routing
[ 0.094144] PCI: pci_cache_line_size set to 64 bytes
[ 0.094214] reserve RAM buffer: 0000000000097800 - 000000000009ffff
[ 0.094216] reserve RAM buffer: 00000000dbfb0000 - 00000000dbffffff
[ 0.094314] NetLabel: Initializing
[ 0.094385] NetLabel: domain hash size = 128
[ 0.094457] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.094540] NetLabel: unlabeled traffic allowed by default
[ 0.097328] AppArmor: AppArmor Filesystem Enabled
[ 0.097434] pnp: PnP ACPI init
[ 0.097519] ACPI: bus type pnp registered
[ 0.097733] pnp 00:00: [bus 00-ff]
[ 0.097736] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.097738] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.097740] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.097742] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.097744] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.097746] pnp 00:00: [mem 0xdc000000-0xf7ffffff window]
[ 0.097748] pnp 00:00: [mem 0xfc000000-0xfed8ffff window]
[ 0.097810] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.097820] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.097822] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.097870] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.097946] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.097995] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.098033] pnp 00:02: [dma 4]
[ 0.098035] pnp 00:02: [io 0x0000-0x000f]
[ 0.098036] pnp 00:02: [io 0x0081-0x0083]
[ 0.098038] pnp 00:02: [io 0x0087]
[ 0.098039] pnp 00:02: [io 0x0089-0x008b]
[ 0.098041] pnp 00:02: [io 0x008f]
[ 0.098042] pnp 00:02: [io 0x00c0-0x00df]
[ 0.098064] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.098076] pnp 00:03: [io 0x0070-0x0071]
[ 0.098089] pnp 00:03: [irq 8]
[ 0.098109] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.098118] pnp 00:04: [io 0x0061]
[ 0.098140] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.098150] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.098155] pnp 00:05: [irq 13]
[ 0.098176] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.098562] pnp 00:06: [io 0x0060]
[ 0.098564] pnp 00:06: [io 0x0064]
[ 0.098569] pnp 00:06: [irq 12]
[ 0.098597] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.098695] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.098698] pnp 00:07: [io 0x0280-0x028f]
[ 0.098699] pnp 00:07: [io 0x0290-0x029f]
[ 0.098738] system 00:07: [io 0x0280-0x028f] has been reserved
[ 0.098813] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.098888] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.099053] pnp 00:08: [io 0x0010-0x001f]
[ 0.099055] pnp 00:08: [io 0x0022-0x003f]
[ 0.099056] pnp 00:08: [io 0x0044-0x005f]
[ 0.099058] pnp 00:08: [io 0x0062-0x0063]
[ 0.099059] pnp 00:08: [io 0x0065-0x006f]
[ 0.099061] pnp 00:08: [io 0x0072-0x007f]
[ 0.099062] pnp 00:08: [io 0x0080]
[ 0.099064] pnp 00:08: [io 0x0084-0x0086]
[ 0.099066] pnp 00:08: [io 0x0088]
[ 0.099067] pnp 00:08: [io 0x008c-0x008e]
[ 0.099069] pnp 00:08: [io 0x0090-0x009f]
[ 0.099070] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.099072] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.099073] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.099075] pnp 00:08: [io 0x0800-0x087f]
[ 0.099076] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.099078] pnp 00:08: [io 0x0500-0x057f]
[ 0.099080] pnp 00:08: [io 0x0900-0x090f]
[ 0.099081] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.099083] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.099085] pnp 00:08: [mem 0xfed40000-0xfed8ffff]
[ 0.099144] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.099218] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.099292] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.099367] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.099441] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.099516] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.099591] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.099667] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.099748] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.099750] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.099781] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.099828] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.099864] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.099940] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.100031] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.100033] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.100071] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.100147] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.100223] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.100370] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 0.100408] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.100483] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.100694] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.100696] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.100698] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.100700] pnp 00:0d: [mem 0x00100000-0xdbffffff]
[ 0.100702] pnp 00:0d: [mem 0xfed90000-0xffffffff]
[ 0.100748] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.100824] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.100900] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.100975] system 00:0d: [mem 0x00100000-0xdbffffff] could not be reserved
[ 0.100993] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.101069] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.101204] pnp: PnP ACPI: found 14 devices
[ 0.101276] ACPI: ACPI bus type pnp unregistered
[ 0.107468] Switching to clocksource acpi_pm
[ 0.107575] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04-04] add_size 1000
[ 0.107579] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 400000
[ 0.107587] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.107604] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.107606] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.107609] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.107614] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdc000000-0xdc3fffff]
[ 0.107690] pci 0000:00:1c.1: BAR 15: assigned [mem 0xdc400000-0xdc5fffff 64bit pref]
[ 0.107808] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.107884] pci 0000:05:00.0: BAR 6: assigned [mem 0xf6000000-0xf607ffff pref]
[ 0.107884] pci 0000:00:01.0: PCI bridge to [bus 05-05]
[ 0.107884] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.107884] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.107884] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.107884] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.107884] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.107933] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xdc3fffff]
[ 0.108016] pci 0000:00:1c.0: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.108129] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.108203] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.108279] pci 0000:00:1c.1: bridge window [mem 0xf3f00000-0xf3ffffff]
[ 0.108356] pci 0000:00:1c.1: bridge window [mem 0xdc400000-0xdc5fffff 64bit pref]
[ 0.108469] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.108543] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.108619] pci 0000:00:1c.5: bridge window [mem 0xf3e00000-0xf3efffff]
[ 0.108695] pci 0000:00:1c.5: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.108808] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.108904] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.108993] pci 0000:00:1e.0: setting latency timer to 64
[ 0.108997] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.108999] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.109009] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.109011] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.109013] pci_bus 0000:00: resource 8 [mem 0xdc000000-0xf7ffffff]
[ 0.109015] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.109017] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.109019] pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.109021] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.109024] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.109025] pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdc3fffff]
[ 0.109027] pci_bus 0000:04: resource 2 [mem 0xdff00000-0xdfffffff 64bit pref]
[ 0.109030] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.109031] pci_bus 0000:03: resource 1 [mem 0xf3f00000-0xf3ffffff]
[ 0.109033] pci_bus 0000:03: resource 2 [mem 0xdc400000-0xdc5fffff 64bit pref]
[ 0.109036] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.109038] pci_bus 0000:02: resource 1 [mem 0xf3e00000-0xf3efffff]
[ 0.109040] pci_bus 0000:02: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
[ 0.109042] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.109044] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.109046] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.109048] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.109050] pci_bus 0000:01: resource 8 [mem 0xdc000000-0xf7ffffff]
[ 0.109052] pci_bus 0000:01: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.109121] NET: Registered protocol family 2
[ 0.109323] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.110417] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.114503] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.115103] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.115179] TCP: reno registered
[ 0.115259] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.115369] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.115608] NET: Registered protocol family 1
[ 0.115925] pci 0000:05:00.0: Boot video device
[ 0.115934] PCI: CLS 32 bytes, default 64
[ 0.115989] Unpacking initramfs...
[ 0.366120] Freeing initrd memory: 16624k freed
[ 0.373440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.373524] Placing 64MB software IO TLB between ffff8800d7faa000 - ffff8800dbfaa000
[ 0.373633] software IO TLB at phys 0xd7faa000 - 0xdbfaa000
[ 0.374329] audit: initializing netlink socket (disabled)
[ 0.374415] type=2000 audit(1354337078.373:1): initialized
[ 0.390840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391742] VFS: Disk quotas dquot_6.5.2
[ 0.391837] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392156] msgmni has been set to 7912
[ 0.392425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.392559] io scheduler noop registered
[ 0.392632] io scheduler deadline registered
[ 0.392717] io scheduler cfq registered (default)
[ 0.392903] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.392990] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.393110] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.393205] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.393298] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.393374] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.393450] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.393465] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.393542] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.393558] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.393634] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.393710] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.393725] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.393800] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.393876] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.393961] intel_idle: does not run on family 6 model 23
[ 0.393996] GHES: HEST is not enabled!
[ 0.394131] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.394694] Non-volatile memory driver v1.3
[ 0.394766] Linux agpgart interface v0.103
[ 0.395076] Fixed MDIO Bus: probed
[ 0.395149] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.395254] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.395258] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.395349] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.395485] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.399427] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.399442] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3dff400
[ 0.405017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.405108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.405183] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.405292] usb usb1: Product: EHCI Host Controller
[ 0.405365] usb usb1: Manufacturer: Linux 3.4.11-2.16-desktop ehci_hcd
[ 0.405439] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.405608] hub 1-0:1.0: USB hub found
[ 0.405683] hub 1-0:1.0: 6 ports detected
[ 0.405827] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.405830] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.405908] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.406047] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.410019] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.410034] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3dff800
[ 0.416017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.416117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.416192] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.416301] usb usb2: Product: EHCI Host Controller
[ 0.416374] usb usb2: Manufacturer: Linux 3.4.11-2.16-desktop ehci_hcd
[ 0.416448] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.416599] hub 2-0:1.0: USB hub found
[ 0.416673] hub 2-0:1.0: 6 ports detected
[ 0.416806] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.416888] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.416984] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.416986] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.417099] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.417236] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400
[ 0.417338] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.417413] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.417522] usb usb3: Product: UHCI Host Controller
[ 0.417595] usb usb3: Manufacturer: Linux 3.4.11-2.16-desktop uhci_hcd
[ 0.417669] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.417826] hub 3-0:1.0: USB hub found
[ 0.417900] hub 3-0:1.0: 2 ports detected
[ 0.418050] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.418053] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.418134] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.418269] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480
[ 0.418370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.418445] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.418554] usb usb4: Product: UHCI Host Controller
[ 0.418626] usb usb4: Manufacturer: Linux 3.4.11-2.16-desktop uhci_hcd
[ 0.418700] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.418851] hub 4-0:1.0: USB hub found
[ 0.418924] hub 4-0:1.0: 2 ports detected
[ 0.419067] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.419070] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.419148] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.419285] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 0.419385] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.419460] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.419569] usb usb5: Product: UHCI Host Controller
[ 0.419641] usb usb5: Manufacturer: Linux 3.4.11-2.16-desktop uhci_hcd
[ 0.419715] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.419869] hub 5-0:1.0: USB hub found
[ 0.420697] hub 5-0:1.0: 2 ports detected
[ 0.420825] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.420828] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.420906] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.421044] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880
[ 0.421146] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.421221] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.421330] usb usb6: Product: UHCI Host Controller
[ 0.421403] usb usb6: Manufacturer: Linux 3.4.11-2.16-desktop uhci_hcd
[ 0.421477] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.421631] hub 6-0:1.0: USB hub found
[ 0.421704] hub 6-0:1.0: 2 ports detected
[ 0.421833] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.421836] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.421917] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.422055] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00
[ 0.422155] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.422230] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.422339] usb usb7: Product: UHCI Host Controller
[ 0.422412] usb usb7: Manufacturer: Linux 3.4.11-2.16-desktop uhci_hcd
[ 0.422486] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.422637] hub 7-0:1.0: USB hub found
[ 0.422710] hub 7-0:1.0: 2 ports detected
[ 0.422838] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.422841] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.422919] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.423056] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000
[ 0.423158] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.423232] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.423341] usb usb8: Product: UHCI Host Controller
[ 0.423414] usb usb8: Manufacturer: Linux 3.4.11-2.16-desktop uhci_hcd
[ 0.423488] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.423640] hub 8-0:1.0: USB hub found
[ 0.423713] hub 8-0:1.0: 2 ports detected
[ 0.423867] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 0.423942] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.426723] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.426821] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.426984] mousedev: PS/2 mouse device common for all mice
[ 0.427171] rtc_cmos 00:03: RTC can wake from S4
[ 0.427363] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.427457] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.427537] cpuidle: using governor ladder
[ 0.427608] cpuidle: using governor menu
[ 0.427680] EFI Variables Facility v0.08 2004-May-17
[ 0.427913] usbcore: registered new interface driver usbhid
[ 0.427986] usbhid: USB HID core driver
[ 0.428205] TCP: cubic registered
[ 0.428319] NET: Registered protocol family 10
[ 0.428565] lib80211: common routines for IEEE802.11 drivers
[ 0.428639] lib80211_crypt: registered algorithm 'NULL'
[ 0.428641] Registering the dns_resolver key type
[ 0.428873] registered taskstats version 1
[ 0.429589] Magic number: 8:217:716
[ 0.429767] rtc_cmos 00:03: setting system clock to 2012-12-01 04:44:38 UTC (1354337078)
[ 0.431941] Freeing unused kernel memory: 944k freed
[ 0.432300] Write protecting the kernel read-only data: 10240k
[ 0.434033] Freeing unused kernel memory: 396k freed
[ 0.434869] Freeing unused kernel memory: 172k freed
[ 0.465332] pata_via 0000:03:00.0: version 0.3.4
[ 0.465630] scsi0 : pata_via
[ 0.465796] scsi1 : pata_via
[ 0.466043] ata1: PATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 0.466125] ata2: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 0.620421] ata1.00: ATAPI: PIONEER DVD-RW DVR-116D, 1.04, max UDMA/66
[ 0.626416] ata1.00: configured for UDMA/66
[ 0.639130] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-116D 1.04 PQ: 0 ANSI: 5
[ 0.795298] ata_piix 0000:00:1f.2: version 2.13
[ 0.795316] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.795599] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.795828] scsi2 : ata_piix
[ 0.795956] scsi3 : ata_piix
[ 0.796984] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[ 0.797075] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[ 0.797168] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.797481] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.797647] scsi4 : ata_piix
[ 0.797777] scsi5 : ata_piix
[ 0.798665] ata5: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[ 0.798742] ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[ 0.873019] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[ 1.035149] usb 6-2: New USB device found, idVendor=0e8f, idProduct=0022
[ 1.035225] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.035300] usb 6-2: Product: USB KB V11
[ 1.035372] usb 6-2: Manufacturer: GASIA
[ 1.052375] input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input0
[ 1.052570] generic-usb 0003:0E8F:0022.0001: input,hidraw0: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:00:1d.0-2/input0
[ 1.085207] input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input1
[ 1.085391] generic-usb 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:00:1d.0-2/input1
[ 1.113678] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.124425] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.376019] Refined TSC clocksource calibration: 2500.088 MHz.
[ 1.376100] Switching to clocksource tsc
[ 1.402845] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 1.426682] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.426766] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.577055] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.577138] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.580234] ata3.00: ATA-7: MAXTOR STM3250310AS, 4.AAA, max UDMA/133
[ 1.580309] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.586217] ata3.00: configured for UDMA/133
[ 1.586388] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325031 4.AA PQ: 0 ANSI: 5
[ 1.586585] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.586751] sd 2:0:0:0: [sda] Write Protect is off
[ 1.586824] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.586847] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.600454] sda: sda1 sda2 sda3
[ 1.600766] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.606143] alua: device handler registered
[ 1.607602] rdac: device handler registered
[ 1.609033] hp_sw: device handler registered
[ 1.610407] emc: device handler registered
[ 1.614471] udevd[107]: starting version 182
[ 1.631537] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 1.635025] ACPI: Power Button [PWRB]
[ 1.635182] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.636444] ACPI: Power Button [PWRF]
[ 1.636871] wmi: Mapper loaded
[ 1.639560] [drm] Initialized drm 1.1.0 20060810
[ 1.648323] [drm] nouveau 0000:05:00.0: Detected an NV50 generation card (0x096080c1)
[ 1.664455] [drm] nouveau 0000:05:00.0: Checking PRAMIN for VBIOS
[ 1.725558] [drm] nouveau 0000:05:00.0: ... appears to be valid
[ 1.725637] [drm] nouveau 0000:05:00.0: Using VBIOS from PRAMIN
[ 1.725711] [drm] nouveau 0000:05:00.0: BIT BIOS found
[ 1.725785] [drm] nouveau 0000:05:00.0: Bios version 62.94.50.00
[ 1.725860] [drm] nouveau 0000:05:00.0: TMDS table version 2.0
[ 1.726144] [drm] nouveau 0000:05:00.0: MXM: no VBIOS data, nothing to do
[ 1.726220] [drm] nouveau 0000:05:00.0: DCB version 4.0
[ 1.726294] [drm] nouveau 0000:05:00.0: DCB outp 00: 02000300 00000028
[ 1.726368] [drm] nouveau 0000:05:00.0: DCB outp 01: 01000302 00020030
[ 1.726443] [drm] nouveau 0000:05:00.0: DCB outp 02: 04011310 00000028
[ 1.726517] [drm] nouveau 0000:05:00.0: DCB outp 03: 02011312 00020030
[ 1.726591] [drm] nouveau 0000:05:00.0: DCB outp 04: 010223f1 00c0c080
[ 1.726665] [drm] nouveau 0000:05:00.0: DCB conn 00: 00001030
[ 1.726772] [drm] nouveau 0000:05:00.0: DCB conn 01: 00002130
[ 1.726878] [drm] nouveau 0000:05:00.0: DCB conn 02: 00000210
[ 1.726984] [drm] nouveau 0000:05:00.0: DCB conn 03: 00000211
[ 1.727094] [drm] nouveau 0000:05:00.0: DCB conn 04: 00000213
[ 1.727203] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD246
[ 1.752605] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xD693
[ 1.755720] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE6E3
[ 1.755834] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE82C
[ 1.757019] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xEA98
[ 1.757128] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xEAFD
[ 1.777259] [drm] nouveau 0000:05:00.0: 0xEAFD: Condition still not met after 20ms, skipping following opcodes
[ 1.779251] [TTM] Zone kernel: Available graphics memory: 2026472 kiB
[ 1.779340] [TTM] Initializing pool allocator
[ 1.779428] [TTM] Initializing DMA pool allocator
[ 1.779523] [drm] nouveau 0000:05:00.0: Detected 512MiB VRAM (DDR2)
[ 1.779615] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.779756] [drm] nouveau 0000:05:00.0: 512 MiB GART (aperture)
[ 1.791114] [drm] nouveau 0000:05:00.0: DCB encoder 1 unknown
[ 1.791202] [drm] nouveau 0000:05:00.0: TV-1 has no encoders, removing
[ 1.791938] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.792032] [drm] No driver support for vblank timestamp query.
[ 1.797720] [drm] nouveau 0000:05:00.0: 1 available performance level(s)
[ 1.797812] [drm] nouveau 0000:05:00.0: 3: core 550MHz shader 1400MHz memory 400MHz fanspeed 100%
[ 1.797945] [drm] nouveau 0000:05:00.0: c: core 400MHz shader 800MHz memory 504MHz fanspeed 40%
[ 1.917739] [drm] nouveau 0000:05:00.0: allocated 1280x1024 fb: 0x330000, bo ffff88011a43cc00
[ 1.917928] fbcon: nouveaufb (fb0) is primary device
[ 1.937132] Console: switching to colour frame buffer device 160x64
[ 1.938782] fb0: nouveaufb frame buffer device
[ 1.938792] drm: registered panic notifier
[ 1.938807] [drm] Initialized nouveau 1.0.0 20120316 for 0000:05:00.0 on minor 0
[ 4.458047] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 4.674452] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 5.232622] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 5.380960] systemd[1]: Inserted module 'autofs4'
[ 5.391761] systemd[1]: Set hostname to <ARM.HOME>.
[ 7.042189] udevd[292]: starting version 182
[ 7.332114] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c
[ 7.969793] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
[ 8.106811] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 8.107049] EDD information not available.
[ 8.237436] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
[ 8.242902] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c
[ 8.244502] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
[ 8.248926] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 9.008419] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.771456] iTCO_vendor_support: vendor-support=0
[ 10.098564] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 10.098936] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 10.099251] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.267353] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 10.267586] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.268250] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 10.470411] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.470761] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 10.470920] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900050a6000, 00:19:66:a1:b4:0e, XID 081000c0 IRQ 44
[ 10.471162] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.560838] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 10.561169] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 10.752335] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 10.752593] ata1.00: ST_FIRST: !(DRQ|ERR|DF)
[ 10.753051] sr 0:0:0:0: CDB: Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 10.753550] ata1.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[ 10.753551] res 50/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
[ 10.754559] ata1.00: status: { DRDY }
[ 10.755090] ata1: soft resetting link
[ 10.915409] ata1.00: configured for UDMA/66
[ 10.921873] ata1: EH complete
[ 11.492418] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 11.780602] ALSA hda_codec.c:5101 autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 11.780606] ALSA hda_codec.c:5105 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.780608] ALSA hda_codec.c:5109 hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.780610] ALSA hda_codec.c:5110 mono: mono_out=0x0
[ 11.780612] ALSA hda_codec.c:5113 dig-out=0x20/0x0
[ 11.780613] ALSA hda_codec.c:5114 inputs:
[ 11.780615] ALSA hda_codec.c:5118 Mic=0x1a
[ 11.780617] ALSA hda_codec.c:5118 Line=0x1b
[ 11.780619] ALSA hda_codec.c:5118 CD=0x1f
[ 11.780620] ALSA hda_codec.c:5120
[ 11.788669] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 11.788839] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 11.788923] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.788992] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.789090] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.789158] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.341232] Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k
[ 19.213283] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 19.955490] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 19.963343] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 19.966076] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.153625] vboxdrv: Found 2 processor cores.
[ 20.154388] vboxdrv: fAsync=0 offMin=0x1ce offMax=0x181f
[ 20.154460] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.154461] vboxdrv: Successfully loaded version 4.1.22_OSE (interface 0x00190000).
[ 20.372635] vboxpci: IOMMU not found (not registered)
[ 20.733176] r8169 0000:02:00.0: eth0: link down
[ 20.733183] r8169 0000:02:00.0: eth0: link down
[ 20.733614] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.441608] r8169 0000:02:00.0: eth0: link up
[ 22.441970] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 61.082188] fuse init (API version 7.18)
[ 65.498280] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
[ 66.092937] EXT4-fs (sda3): re-mounted. Opts: commit=0
Попробуйте использовать заблаговременную оболочку (shell), в частности выполните: systemctl list-jobs (естественно, когда система перестанет грузится).
http://ru.opensuse.org/SDB:Systemd#.D0.97.D0.B0.D0.B1.D0.BB.D0.B0.D0.B3.D0.BE.D0.B2.D1.80.D0.B5.D0.BC.D0.B5.D0.BD.D0.BD.D0.B0.D1.8F_.D0.BE.D0.B1.D0.BE.D0.BB.D0.BE.D1.87.D0.BA.D0.B0_.28shell.29
Попробовал.
Когда система в зависшем состоянии, то переход в новую консоль по ctrl+alt+F9 уже не работает.
Если успеть перейти в данную консоль до зависания, то авторизоваться и ввести какую-либо команду после
зависания не получается (клавиатура после зависания не отвечает).
Ну, тогда пробуйте так:
echo "blacklist iTCO_wdt" | sudo tee /etc/modprobe.d/watchdog.conf
Попробовал. Дело действительно не в watchdog'е.
Сейчас загрузка стала останавливаться, а система зависать на этапе:
[ 10.560838] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 10.561169] sd 2:0:0:0: Attached scsi generic sg1 type 0