LinuxForum.Fans
Тема

Уснул и не проснулся

Автор: i2ks 21 сообщений 6750 просмотров
23.03.2010 13:47 #18941

Доброе день! smile
Есть рабочая станция под управлением opensuse 11.2,периодически бывает то что машинка засыпает и ни как не просыпается, на мониторе зловещая надпись "no signal",спасает только ребут или иксы перезапускать, как лечить это дело, есть идеи? google,разумного ни чего не показал.

Конфигурация ПК + messages + xorg.log привожу ниже.

OS:OpenSuse 11.2 + last update

text

#uname -a
Linux vif53 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 i686 i686 i386 GNU/Linux

HW

text

vif53:~ # hwinfo --short
cpu:                                                            
                       Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz, 1200 MHz
                       Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz, 2200 MHz
keyboard:
  /dev/input/event0    AT Translated Set 2 keyboard
mouse:
  /dev/input/mice      ImPS/2 Generic Wheel Mouse
monitor:
                       Generic Monitor
graphics card:
                       Intel 945G
sound:
                       Intel 82801G (ICH7 Family) High Definition Audio Controller
storage:
                       Floppy disk controller
                       Intel 82801G (ICH7 Family) IDE Controller
                       Intel 82801GB/GR/GH (ICH7 Family) SATA IDE Controller
network:
  eth0                 Attansic L2 100 Mbit Ethernet Adapter
  wlan0                Realtek RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller
network interface:
  lo                   Loopback network interface
  eth0                 Ethernet network interface
  wmaster0             Network Interface
  wlan0                WLAN network interface
  vboxnet0             Ethernet network interface
disk:
  /dev/sda             ST3160815AS
partition:
  /dev/sda1            Partition
  /dev/sda2            Partition
  /dev/sda5            Partition
  /dev/sda6            Partition
  /dev/sda7            Partition
  /dev/sda8            Partition
  /dev/sda9            Partition
cdrom:
  /dev/sr0             Optiarc DVD RW AD-7191S
usb controller:
                       Intel 82801G (ICH7 Family) USB UHCI Controller #1
                       Intel 82801G (ICH7 Family) USB UHCI Controller #2
                       Intel 82801G (ICH7 Family) USB UHCI Controller #3
                       Intel 82801G (ICH7 Family) USB UHCI Controller #4
                       Intel 82801G (ICH7 Family) USB2 EHCI Controller
bios:
                       BIOS
bridge:
                       Intel 82945G/GZ/P/PL Memory Controller Hub
                       Intel 82801G (ICH7 Family) PCI Express Port 1
                       Intel 82801G (ICH7 Family) PCI Express Port 2
                       Intel 82801 PCI Bridge
                       Intel 82801GB/GR (ICH7 Family) LPC Interface Bridge
hub:
                       Linux 2.6.31.12-0.2-desktop ehci_hcd EHCI Host Controller
                       Linux 2.6.31.12-0.2-desktop uhci_hcd UHCI Host Controller
                       Linux 2.6.31.12-0.2-desktop uhci_hcd UHCI Host Controller
                       Linux 2.6.31.12-0.2-desktop uhci_hcd UHCI Host Controller
                       Linux 2.6.31.12-0.2-desktop uhci_hcd UHCI Host Controller
memory:
                       Main Memory
unknown:
                       FPU
                       DMA controller
                       PIC
                       Timer
                       Keyboard controller
  /dev/lp0             Parallel controller
                       PS/2 Controller
                       Intel 82801G (ICH7 Family) SMBus Controller
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
                       Unclassified device
  /dev/ttyS0           16550A

Messages

text

vif53:/var/log#tail -250 /var/log/messages
Mar 23 10:23:37 vif53 smartd[3379]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 76 to 77
Mar 23 10:24:34 vif53 smbd[28438]: [2010/03/23 10:24:34,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 10:24:34 vif53 smbd[28438]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 10:24:34 vif53 smbd[28438]: [2010/03/23 10:24:34,  0] lib/util_sock.c:738(write_data)
Mar 23 10:24:34 vif53 smbd[28438]: [2010/03/23 10:24:34,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 10:24:34 vif53 smbd[28438]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 10:24:34 vif53 smbd[28438]:   write_data: write failure in writing to client 0.0.0.0. Error Соединение сброшено другой стороной
Mar 23 10:24:34 vif53 smbd[28438]: [2010/03/23 10:24:34,  0] smbd/process.c:62(srv_send_smb)
Mar 23 10:24:34 vif53 smbd[28438]:   Error writing 4 bytes to client. -1. (Конечная точка передачи не подсоединена)
Mar 23 10:40:27 vif53 smbd[28530]: [2010/03/23 10:40:27,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 10:40:27 vif53 smbd[28530]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 10:40:27 vif53 smbd[28530]: [2010/03/23 10:40:27,  0] lib/util_sock.c:738(write_data)
Mar 23 10:40:27 vif53 smbd[28530]: [2010/03/23 10:40:27,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 10:40:27 vif53 smbd[28530]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 10:40:27 vif53 smbd[28530]:   write_data: write failure in writing to client 0.0.0.0. Error Соединение сброшено другой стороной
Mar 23 10:40:27 vif53 smbd[28530]: [2010/03/23 10:40:27,  0] smbd/process.c:62(srv_send_smb)
Mar 23 10:40:27 vif53 smbd[28530]:   Error writing 4 bytes to client. -1. (Конечная точка передачи не подсоединена)
Mar 23 10:42:45 vif53 kernel: [420600.971066] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 10:42:45 vif53 kernel: [420600.971085] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 10:42:45 vif53 kernel: [420600.971099] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 10:42:45 vif53 kernel: [420600.971117]  f3945eec 00000046 f3a2811c 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 10:42:45 vif53 kernel: [420600.971153]  7093b856 00017e6c c09f2080 c09f2080 f3a2837c 7093ae6c 00017e6c c09f2080
Mar 23 10:42:45 vif53 kernel: [420600.971186]  f3047200 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 10:42:45 vif53 kernel: [420600.971211] Call Trace:
Mar 23 10:42:45 vif53 kernel: [420600.971236]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 10:42:45 vif53 kernel: [420600.971254]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 10:42:45 vif53 kernel: [420600.971286]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 10:42:45 vif53 kernel: [420600.971324]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 10:42:45 vif53 kernel: [420600.971342]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 10:42:45 vif53 kernel: [420600.971359]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 10:42:45 vif53 kernel: [420600.971376]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 10:44:45 vif53 kernel: [420720.971171] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 10:44:45 vif53 kernel: [420720.971192] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 10:44:45 vif53 kernel: [420720.971207] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 10:44:45 vif53 kernel: [420720.971225]  f3945eec 00000046 f3a2811c 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 10:44:45 vif53 kernel: [420720.971250]  7093b856 00017e6c c09f2080 c09f2080 f3a2837c 7093ae6c 00017e6c c09f2080
Mar 23 10:44:45 vif53 kernel: [420720.971275]  f3047200 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 10:44:45 vif53 kernel: [420720.971299] Call Trace:
Mar 23 10:44:45 vif53 kernel: [420720.971318]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 10:44:45 vif53 kernel: [420720.971328]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 10:44:45 vif53 kernel: [420720.971349]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 10:44:45 vif53 kernel: [420720.971374]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 10:44:45 vif53 kernel: [420720.971385]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 10:44:45 vif53 kernel: [420720.971394]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 10:44:45 vif53 kernel: [420720.971404]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 10:46:45 vif53 kernel: [420840.971159] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 10:46:45 vif53 kernel: [420840.971179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 10:46:45 vif53 kernel: [420840.971193] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 10:46:45 vif53 kernel: [420840.971211]  f3945eec 00000046 f3a2811c 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 10:46:45 vif53 kernel: [420840.971237]  7093b856 00017e6c c09f2080 c09f2080 f3a2837c 7093ae6c 00017e6c c09f2080
Mar 23 10:46:45 vif53 kernel: [420840.971262]  f3047200 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 10:46:45 vif53 kernel: [420840.971287] Call Trace:
Mar 23 10:46:45 vif53 kernel: [420840.971313]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 10:46:45 vif53 kernel: [420840.971330]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 10:46:45 vif53 kernel: [420840.971363]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 10:46:45 vif53 kernel: [420840.971401]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 10:46:45 vif53 kernel: [420840.971419]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 10:46:45 vif53 kernel: [420840.971435]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 10:46:45 vif53 kernel: [420840.971452]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 10:48:45 vif53 kernel: [420960.971047] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 10:48:45 vif53 kernel: [420960.971066] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 10:48:45 vif53 kernel: [420960.971081] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 10:48:45 vif53 kernel: [420960.971099]  f3945eec 00000046 f3a2811c 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 10:48:45 vif53 kernel: [420960.971125]  7093b856 00017e6c c09f2080 c09f2080 f3a2837c 7093ae6c 00017e6c c09f2080
Mar 23 10:48:45 vif53 kernel: [420960.971161]  f3047200 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 10:48:45 vif53 kernel: [420960.971188] Call Trace:
Mar 23 10:48:45 vif53 kernel: [420960.971213]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 10:48:45 vif53 kernel: [420960.971232]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 10:48:45 vif53 kernel: [420960.971265]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 10:48:45 vif53 kernel: [420960.971303]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 10:48:45 vif53 kernel: [420960.971321]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 10:48:45 vif53 kernel: [420960.971338]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 10:48:45 vif53 kernel: [420960.971355]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 10:50:45 vif53 kernel: [421080.971047] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 10:50:45 vif53 kernel: [421080.971067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 10:50:45 vif53 kernel: [421080.971081] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 10:50:45 vif53 kernel: [421080.971099]  f3945eec 00000046 f3a2811c 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 10:50:45 vif53 kernel: [421080.971135]  7093b856 00017e6c c09f2080 c09f2080 f3a2837c 7093ae6c 00017e6c c09f2080
Mar 23 10:50:45 vif53 kernel: [421080.971161]  f3047200 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 10:50:45 vif53 kernel: [421080.971186] Call Trace:
Mar 23 10:50:45 vif53 kernel: [421080.971211]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 10:50:45 vif53 kernel: [421080.971229]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 10:50:45 vif53 kernel: [421080.971261]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 10:50:45 vif53 kernel: [421080.971299]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 10:50:45 vif53 kernel: [421080.971317]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 10:50:45 vif53 kernel: [421080.971333]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 10:50:45 vif53 kernel: [421080.971350]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 10:52:45 vif53 kernel: [421200.971166] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 10:52:45 vif53 kernel: [421200.971185] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 10:52:45 vif53 kernel: [421200.971200] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 10:52:45 vif53 kernel: [421200.971217]  f3945eec 00000046 f3a2811c 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 10:52:45 vif53 kernel: [421200.971243]  7093b856 00017e6c c09f2080 c09f2080 f3a2837c 7093ae6c 00017e6c c09f2080
Mar 23 10:52:45 vif53 kernel: [421200.971269]  f3047200 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 10:52:45 vif53 kernel: [421200.971294] Call Trace:
Mar 23 10:52:45 vif53 kernel: [421200.971319]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 10:52:45 vif53 kernel: [421200.971337]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 10:52:45 vif53 kernel: [421200.971369]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 10:52:45 vif53 kernel: [421200.971408]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 10:52:45 vif53 kernel: [421200.971426]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 10:52:45 vif53 kernel: [421200.971442]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 10:52:45 vif53 kernel: [421200.971459]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 10:54:45 vif53 kernel: [421320.971164] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 10:54:45 vif53 kernel: [421320.971183] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 10:54:45 vif53 kernel: [421320.971197] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 10:54:45 vif53 kernel: [421320.971215]  f3945eec 00000046 f3a2811c 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 10:54:45 vif53 kernel: [421320.971242]  7093b856 00017e6c c09f2080 c09f2080 f3a2837c 7093ae6c 00017e6c c09f2080
Mar 23 10:54:45 vif53 kernel: [421320.971261]  f3047200 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 10:54:45 vif53 kernel: [421320.971280] Call Trace:
Mar 23 10:54:45 vif53 kernel: [421320.971300]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 10:54:45 vif53 kernel: [421320.971314]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 10:54:45 vif53 kernel: [421320.971339]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 10:54:45 vif53 kernel: [421320.971370]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 10:54:45 vif53 kernel: [421320.971383]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 10:54:45 vif53 kernel: [421320.971396]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 10:54:45 vif53 kernel: [421320.971409]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 10:58:20 vif53 smbd[28576]: [2010/03/23 10:58:20,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 10:58:20 vif53 smbd[28576]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 10:58:20 vif53 smbd[28576]: [2010/03/23 10:58:20,  0] lib/util_sock.c:738(write_data)
Mar 23 10:58:20 vif53 smbd[28576]: [2010/03/23 10:58:20,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 10:58:20 vif53 smbd[28576]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 10:58:20 vif53 smbd[28576]:   write_data: write failure in writing to client 0.0.0.0. Error Соединение сброшено другой стороной
Mar 23 10:58:20 vif53 smbd[28576]: [2010/03/23 10:58:20,  0] smbd/process.c:62(srv_send_smb)
Mar 23 10:58:20 vif53 smbd[28576]:   Error writing 4 bytes to client. -1. (Конечная точка передачи не подсоединена)
Mar 23 11:00:16 vif53 run-crons[28621]: opensuse.org-online_update: OK
Mar 23 11:00:45 vif53 kernel: [421680.971188] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 11:00:45 vif53 kernel: [421680.971207] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 11:00:45 vif53 kernel: [421680.971222] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 11:00:45 vif53 kernel: [421680.971240]  f3945eec 00000046 df5c0000 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 11:00:45 vif53 kernel: [421680.971265]  5abc143c 00017f4f c09f2080 c09f2080 f3a2837c 5abc0a44 00017f4f c09f2080
Mar 23 11:00:45 vif53 kernel: [421680.971291]  f39f13c0 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 11:00:45 vif53 kernel: [421680.971316] Call Trace:
Mar 23 11:00:45 vif53 kernel: [421680.971342]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 11:00:45 vif53 kernel: [421680.971359]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 11:00:45 vif53 kernel: [421680.971392]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 11:00:45 vif53 kernel: [421680.971430]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 11:00:45 vif53 kernel: [421680.971448]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 11:00:45 vif53 kernel: [421680.971464]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 11:00:45 vif53 kernel: [421680.971481]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 11:02:45 vif53 kernel: [421800.971119] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 11:02:45 vif53 kernel: [421800.971147] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 11:02:45 vif53 kernel: [421800.971162] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 11:02:45 vif53 kernel: [421800.971180]  f3945eec 00000046 df5c0000 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 11:02:45 vif53 kernel: [421800.971206]  5abc143c 00017f4f c09f2080 c09f2080 f3a2837c 5abc0a44 00017f4f c09f2080
Mar 23 11:02:45 vif53 kernel: [421800.971236]  f39f13c0 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 11:02:45 vif53 kernel: [421800.971263] Call Trace:
Mar 23 11:02:45 vif53 kernel: [421800.971289]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 11:02:45 vif53 kernel: [421800.971307]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 11:02:45 vif53 kernel: [421800.971339]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 11:02:45 vif53 kernel: [421800.971377]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 11:02:45 vif53 kernel: [421800.971396]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 11:02:45 vif53 kernel: [421800.971412]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 11:02:45 vif53 kernel: [421800.971428]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 11:04:45 vif53 kernel: [421920.971170] INFO: task i915/0:1775 blocked for more than 120 seconds.
Mar 23 11:04:45 vif53 kernel: [421920.971189] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Mar 23 11:04:45 vif53 kernel: [421920.971204] i915/0        D 00000000     0  1775      2 0x00000000
Mar 23 11:04:45 vif53 kernel: [421920.971222]  f3945eec 00000046 df5c0000 00000000 c09f2080 f3a2837c c09f2080 c09f2080
Mar 23 11:04:45 vif53 kernel: [421920.971247]  5abc143c 00017f4f c09f2080 c09f2080 f3a2837c 5abc0a44 00017f4f c09f2080
Mar 23 11:04:45 vif53 kernel: [421920.971273]  f39f13c0 f3a280f0 4f301d23 f51e6818 f3a280f0 ffffffff f3945f1c c06951a5
Mar 23 11:04:45 vif53 kernel: [421920.971298] Call Trace:
Mar 23 11:04:45 vif53 kernel: [421920.971324]  [<c06951a5>] __mutex_lock_slowpath+0xe5/0x180
Mar 23 11:04:45 vif53 kernel: [421920.971343]  [<c0694d65>] mutex_lock+0x25/0x50
Mar 23 11:04:45 vif53 kernel: [421920.971375]  [<f8369a25>] i915_gem_retire_work_handler+0x35/0x90 [i915]
Mar 23 11:04:45 vif53 kernel: [421920.971413]  [<c02689eb>] run_workqueue+0x7b/0x190
Mar 23 11:04:45 vif53 kernel: [421920.971431]  [<c026a500>] worker_thread+0x90/0x100
Mar 23 11:04:45 vif53 kernel: [421920.971447]  [<c026e3c4>] kthread+0x84/0x90
Mar 23 11:04:45 vif53 kernel: [421920.971464]  [<c0204d8b>] kernel_thread_helper+0x7/0x1c
Mar 23 11:12:43 vif53 smbd[28719]: [2010/03/23 11:12:43,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 11:12:43 vif53 smbd[28719]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 11:12:43 vif53 smbd[28719]: [2010/03/23 11:12:43,  0] lib/util_sock.c:738(write_data)
Mar 23 11:12:43 vif53 smbd[28719]: [2010/03/23 11:12:43,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 11:12:43 vif53 smbd[28719]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 11:12:43 vif53 smbd[28719]:   write_data: write failure in writing to client 0.0.0.0. Error Соединение сброшено другой стороной
Mar 23 11:12:43 vif53 smbd[28719]: [2010/03/23 11:12:43,  0] smbd/process.c:62(srv_send_smb)
Mar 23 11:12:43 vif53 smbd[28719]:   Error writing 4 bytes to client. -1. (Конечная точка передачи не подсоединена)
Mar 23 11:28:36 vif53 smbd[28758]: [2010/03/23 11:28:36,  0] lib/util_sock.c:539(read_fd_with_timeout)
Mar 23 11:28:36 vif53 smbd[28758]: [2010/03/23 11:28:36,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 11:28:36 vif53 smbd[28758]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 11:28:36 vif53 smbd[28758]:   read_fd_with_timeout: client 0.0.0.0 read error = Соединение сброшено другой стороной.
Mar 23 11:30:21 vif53 smbd[28787]: [2010/03/23 11:30:21,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 11:30:21 vif53 smbd[28787]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 11:30:21 vif53 smbd[28787]: [2010/03/23 11:30:21,  0] lib/util_sock.c:738(write_data)
Mar 23 11:30:21 vif53 smbd[28787]: [2010/03/23 11:30:21,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 11:30:21 vif53 smbd[28787]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 11:30:21 vif53 smbd[28787]:   write_data: write failure in writing to client 0.0.0.0. Error Соединение сброшено другой стороной
Mar 23 11:30:21 vif53 smbd[28787]: [2010/03/23 11:30:21,  0] smbd/process.c:62(srv_send_smb)
Mar 23 11:30:21 vif53 smbd[28787]:   Error writing 4 bytes to client. -1. (Конечная точка передачи не подсоединена)
Mar 23 11:45:02 vif53 su: (to beagleindex) root on none
Mar 23 11:45:07 vif53 su: (to beagleindex) root on none
Mar 23 11:45:23 vif53 su: (to beagleindex) root on none
Mar 23 11:45:27 vif53 run-crons[28794]: beagle-crawl-system: OK
Mar 23 11:45:28 vif53 run-crons[28794]: logrotate: OK
Mar 23 11:45:28 vif53 run-crons[28794]: suse-clean_catman: OK
Mar 23 11:45:28 vif53 run-crons[28794]: suse-do_mandb: OK
Mar 23 11:45:29 vif53 run-crons[28794]: suse.de-backup-rc.config: OK
Mar 23 11:45:37 vif53 run-crons[28794]: suse.de-backup-rpmdb: OK
Mar 23 11:45:37 vif53 run-crons[28794]: suse.de-check-battery: OK
Mar 23 11:45:37 vif53 run-crons[28794]: suse.de-clean-tmp: OK
Mar 23 11:45:37 vif53 run-crons[28794]: suse.de-cron-local: OK
Mar 23 11:53:37 vif53 smartd[3379]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 77 to 78
Mar 23 11:58:00 vif53 dhcpcd[2652]: eth0: renewing lease of 192.168.0.53
Mar 23 11:58:00 vif53 dhcpcd[2652]: eth0: leased 192.168.0.53 for 14400 seconds
Mar 23 11:58:00 vif53 dhcpcd[2652]: eth0: adding IP address 192.168.0.53/24
Mar 23 11:58:00 vif53 dhcpcd[2652]: eth0: adding default route via 192.168.0.211 metric 0
Mar 23 11:58:00 vif53 ifup:     eth0      device: Attansic Technology Corp. L2 100 Mbit Ethernet Adapter (rev a0)
Mar 23 11:58:01 vif53 nmbd[27921]: [2010/03/23 11:58:01,  0] nmbd/nmbd.c:71(terminate)
Mar 23 11:58:01 vif53 nmbd[27921]:   Got SIGTERM: going down...
Mar 23 11:58:02 vif53 SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
Mar 23 11:58:02 vif53 SuSEfirewall2: using default zone 'ext' for interface vboxnet0
Mar 23 11:58:02 vif53 SuSEfirewall2: using default zone 'ext' for interface wlan0
Mar 23 11:58:02 vif53 SuSEfirewall2: using default zone 'ext' for interface wmaster0
Mar 23 11:58:02 vif53 SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
Mar 23 11:58:02 vif53 SuSEfirewall2: Warning: Kernel lacks support for IPv6 REJECT target! Using DROP for IPv6 instead.
Mar 23 11:58:03 vif53 SuSEfirewall2: batch committing...
Mar 23 11:58:03 vif53 SuSEfirewall2: Firewall rules successfully set
Mar 23 11:58:04 vif53 dhcpcd[2652]: eth0: setting hostname to `vif53'
Mar 23 12:02:22 vif53 smbd[29485]: [2010/03/23 12:02:22,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 12:02:22 vif53 smbd[29485]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 12:02:22 vif53 smbd[29485]: [2010/03/23 12:02:22,  0] lib/util_sock.c:738(write_data)
Mar 23 12:02:22 vif53 smbd[29485]: [2010/03/23 12:02:22,  0] lib/util_sock.c:1491(get_peer_addr_internal)
Mar 23 12:02:22 vif53 smbd[29485]:   getpeername failed. Error was Конечная точка передачи не подсоединена
Mar 23 12:02:22 vif53 smbd[29485]:   write_data: write failure in writing to client 0.0.0.0. Error Соединение сброшено другой стороной
Mar 23 12:02:22 vif53 smbd[29485]: [2010/03/23 12:02:22,  0] smbd/process.c:62(srv_send_smb)
Mar 23 12:02:22 vif53 smbd[29485]:   Error writing 4 bytes to client. -1. (Конечная точка передачи не подсоединена)
Mar 23 12:11:01 vif53 sshd[29489]: Accepted keyboard-interactive/pam for useradm from 192.168.0.220 port 61297 ssh2
Mar 23 12:11:01 vif53 sshd[29489]: pam_env(sshd:setcred): non-alphanumeric key 'alias aumix=padsp aumix' in /etc/environment', ignoring
Mar 23 12:11:01 vif53 sshd[29489]: pam_env(sshd:setcred): non-alphanumeric key 'alias sox=padsp sox' in /etc/environment', ignoring
Mar 23 12:11:01 vif53 sshd[29489]: pam_env(sshd:setcred): non-alphanumeric key 'alias timidity=timidity -Oe' in /etc/environment', ignoring
Mar 23 12:11:01 vif53 sshd[29496]: pam_env(sshd:setcred): non-alphanumeric key 'alias aumix=padsp aumix' in /etc/environment', ignoring
Mar 23 12:11:01 vif53 sshd[29496]: pam_env(sshd:setcred): non-alphanumeric key 'alias sox=padsp sox' in /etc/environment', ignoring
Mar 23 12:11:01 vif53 sshd[29496]: pam_env(sshd:setcred): non-alphanumeric key 'alias timidity=timidity -Oe' in /etc/environment', ignoring
Mar 23 12:11:23 vif53 su: (to root) useradm on /dev/pts/2
Mar 23 12:11:23 vif53 su: pam_env(su-l:setcred): non-alphanumeric key 'alias aumix=padsp aumix' in /etc/environment', ignoring
Mar 23 12:11:23 vif53 su: pam_env(su-l:setcred): non-alphanumeric key 'alias sox=padsp sox' in /etc/environment', ignoring
Mar 23 12:11:23 vif53 su: pam_env(su-l:setcred): non-alphanumeric key 'alias timidity=timidity -Oe' in /etc/environment', ignoring

Xorg.log

text

# tail -200 /var/log/Xorg.0.log
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 758
(II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D01A077856220C074CC6A28458FBA0F003907FC8.xkm
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 758
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 758
(II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D2F0B242A16FA43D21BD0696E57611CE975B8C39.xkm
23.03.2010 13:48 #18942

Если ты имеешь в виду Suspend, который "ждущий режим", то проблема скорее всего в ядре, которое есть смысл обновить.

23.03.2010 13:49 #18943

"Засыпает" как - переходит в ждущий режим?
У меня было недавно нечто такое - но машинка просто висла.
Оказался банальный перегрев...

23.03.2010 13:50 · отредактировано #18944

Writer, еще есть какие идеи?
Teocally, машинка рабочая, поверял, просто в ждущем режиме и все(или иначе спит))

23.03.2010 13:53 #18947

Я не большой спец по саспенду, но сам бы попробовал бы продиагностировать: удалить всю периферию, поставить в xorg.conf драйвер vesa, затем усыпить ПК без DE, просто из командной строки. Если потом проснётся - последовательно всё вернуть, проверяя на каждом этапе.

23.03.2010 14:31 #18959

Отпишись, если чего получится :)

23.03.2010 14:34 #18961

Writer, хорошо, тему то закрывать надо будет)

24.03.2010 11:44 #19354

renegat, уже лучше) только вот почему на одной рабочей станции такое проявляется?

24.03.2010 12:34 #19370

Ждущий режим на серваке???

24.03.2010 12:44 #19374

hiBeid, oO

i2ks написал:
рабочая станция под управлением opensuse 11.2
, читаем внимательно, а не через строчку :[
24.03.2010 12:50 · отредактировано #19379

Хорошо, я специально посмотрел значение термина "рабочая станция", осталось так и не понятно, о чем вы?
не нравится засыпание- удалите pm utils, есличе, прочел только начало топика- на него и отвечаю.

24.03.2010 13:00 #19384
hiBeid написал:
Хорошо, я специально посмотрел значение термина "рабочая станция", осталось так и не понятно, о чем вы?
не нравится засыпание- удалите pm utils, есличе, прочел только начало топика- на него и отвечаю.

Если вы не понимаете суть вопроса и разговора, зачем тогда плодить посты и задавать дурацкие вопросы? Лучше иногда молчать - чем говорить.

P.s. что за тролинг такой? О_о

24.03.2010 13:09 #19391

я тоже обратил внимания на весьма своеобразный стиль общения...

24.03.2010 15:40 #19461

i2ks, вроде бы иногда решает проблему

попробуйте найти и заменить в /etc/suspend.conf строку
shutdown method = platform
на
shutdown method = shutdown

26.03.2010 12:20 · отредактировано #19466

renegat, сейчас ПК в стадии тестирования, вывод отпишу позже, как будет результат :)

Добавил acpi_sleep=s3_bios,s3_mode, 3й день полет нормальный. Тема еще актуальна. Посмотрим что будет на следующей недели :)

30.03.2010 20:00 #22363

i2ks, Как всё таки настроить ждущий режим в линуксе? почитал я статью "Отладка_ACPI_спящего_режима " - непонятно. Не просыпается ни после echo mem > /sys/power/state, ни после pm-suspend
Куда и как добавлять acpi_sleep=s3_bios,s3_mode?

На клаве есть кнопка Sleep. Жму - гаснет только экран. Как сделать так, чтоб по кнопке sleep ком в ждущий режим ушёл?

ps Debian lenny

30.03.2010 20:48 · отредактировано #22380

juvf, а что у тебя в messages твориться когда ты пытаешься это выполнить? т.е. при нажатии кнопки и т.д
"echo -n "mem" > /sys/power/state= blablabla " - может все же так? Завтра еще отпишу что и как, если не получится.

Войдите или зарегистрируйтесь, чтобы ответить.