Тема

Пропадает raid массив sdb1 после перезагрузки

Автор: mil612 8 сообщений 5356 просмотров

19.04.2013 09:00 #315926

Собственно проблема такова, у меня был настроен программный raid на slackware с помощью mdadm.
mdstat выглядит так:

text

# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath]
md1 : active raid1 sdb2[1] sda2[0]
      4947904 blocks [2/2] [UU]
md0 : active raid1 sda1[0] sdb1[1]
      307620544 blocks [2/2] [UU]

md0 - основной раздел, md1 - swap раздел
структура дисков:

text

# fdisk -l
Диск /dev/sda: 320.0 ГБ, 320072933376 байт
255 heads, 63 sectors/track, 38913 cylinders
Units = цилиндры of 16065 * 512 = 8225280 bytes
Disk identifier: 0x6ec7af21
  Устр-во Загр     Начало       Конец       Блоки   Id  Система
/dev/sda1   *           1       38297   307620621   fd  Автоопределение Linux raid
/dev/sda2           38298       38913     4948020   fd  Автоопределение Linux raid
Диск /dev/sdb: 320.0 ГБ, 320072933376 байт
255 heads, 63 sectors/track, 38913 cylinders
Units = цилиндры of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0c81ec1c
  Устр-во Загр     Начало       Конец       Блоки   Id  Система
/dev/sdb1   *           1       38297   307620621   fd  Автоопределение Linux raid
/dev/sdb2           38298       38913     4948020   fd  Автоопределение Linux raid

После перезагрузки ПК постоянно пропадает sdb1, приходится постоянно вручную запускать синхронизацию дисков командой # mdadm /dev/md0 --manage --add /dev/sda1. До недавнего времени все было нормально после перезагрузки, но что-то потом пошло не так и стало постоянное пропадание sdb1.
Кто что подскажет из-за чего это может быть?

19.04.2013 10:05 #315940

"avaddon66⇓" написал:
Кто что подскажет из-за чего это может быть?

Май близится, а телепаты уже в отпуске.
dmesg надо смотреть после загрузки и /var/log/messges на предмет ошибок.

19.04.2013 10:57 #315954

dmesg

Показать

table at [c00f9bf0] 000f9bf0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x000dd7a1
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000dd7a1
On node 0 totalpages: 907072
free_area_init_node: node 0, pgdat c093eb00, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 672497 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at e2000000 (gap: e0000000:14000000)
PERCPU: Allocating 39452 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 899984
Kernel command line: auto BOOT_IMAGE=Linux ro root=900 vt.default_utf8=0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 2826.206 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3588368k/3628676k available (6388k kernel code, 39056k reserved, 2148k data, 424k init, 2711172k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0963000 - 0xc09cd000 ( 424 kB)
.data : 0xc073d137 - 0xc0956278 (2148 kB)
.text : 0xc0100000 - 0xc073d137 (6388 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 5652.41 BogoMIPS (lpj=11304824)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz stepping 0a
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5652.41 BogoMIPS (lpj=11304832)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/3 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5652.44 BogoMIPS (lpj=11304881)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/2 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5652.43 BogoMIPS (lpj=11304871)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (22609.70 BogoMIPS).
net_namespace: 776 bytes
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 10651.000 MB/sec
xor: using function: pIII_sse (10651.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
PCI: MCFG area at f4000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 64bit mmio: [f0000000, f03fffff]
PCI: 0000:00:02.0 reg 18 64bit mmio: [e0000000, efffffff]
PCI: 0000:00:02.0 reg 20 io port: [1230, 1237]
PCI: 0000:00:02.1 reg 10 64bit mmio: [f0400000, f04fffff]
PCI: 0000:00:03.0 reg 10 64bit mmio: [f0527100, f052710f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:03.2 reg 10 io port: [1238, 123f]
PCI: 0000:00:03.2 reg 14 io port: [1260, 1263]
PCI: 0000:00:03.2 reg 18 io port: [1240, 1247]
PCI: 0000:00:03.2 reg 1c io port: [1264, 1267]
PCI: 0000:00:03.2 reg 20 io port: [1220, 122f]
PCI: 0000:00:03.3 reg 10 io port: [1248, 124f]
PCI: 0000:00:03.3 reg 14 32bit mmio: [f0524000, f0524fff]
PCI: 0000:00:19.0 reg 10 32bit mmio: [f0500000, f051ffff]
PCI: 0000:00:19.0 reg 14 32bit mmio: [f0525000, f0525fff]
PCI: 0000:00:19.0 reg 18 io port: [1100, 111f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [1120, 113f]
PCI: 0000:00:1a.1 reg 20 io port: [1140, 115f]
PCI: 0000:00:1a.2 reg 20 io port: [1160, 117f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [f0526800, f0526bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f0520000, f0523fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [1180, 119f]
PCI: 0000:00:1d.1 reg 20 io port: [11a0, 11bf]
PCI: 0000:00:1d.2 reg 20 io port: [11c0, 11df]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f0526c00, f0526fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.2 reg 10 io port: [1250, 1257]
PCI: 0000:00:1f.2 reg 14 io port: [1268, 126b]
PCI: 0000:00:1f.2 reg 18 io port: [1258, 125f]
PCI: 0000:00:1f.2 reg 1c io port: [126c, 126f]
PCI: 0000:00:1f.2 reg 20 io port: [11e0, 11ff]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [f0526000, f05267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
tracer: 772 pages allocated for 65536 entries of 48 bytes
actual entries 65620
ACPI: RTC can wake from S4
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: ioport range 0xcb0-0xcbf has been reserved
system 00:0c: ioport range 0x400-0x41f has been reserved
system 00:0c: ioport range 0x420-0x43f has been reserved
system 00:0c: ioport range 0x440-0x45f has been reserved
system 00:0c: ioport range 0x460-0x47f has been reserved
system 00:0c: ioport range 0x800-0x87f has been reserved
system 00:0c: ioport range 0x880-0x8ff has been reserved
system 00:0c: ioport range 0xf800-0xf81f has been reserved
system 00:0c: ioport range 0xf820-0xf83f has been reserved
system 00:0c: ioport range 0xf840-0xf85f has been reserved
system 00:0c: ioport range 0xf860-0xf87f has been reserved
system 00:0c: ioport range 0xfa00-0xfa3f has been reserved
system 00:0c: ioport range 0xfc00-0xfc7f has been reserved
system 00:0c: ioport range 0xfc80-0xfcff has been reserved
system 00:0c: ioport range 0xfe00-0xfe7f has been reserved
system 00:0c: ioport range 0xfe80-0xfeff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved
system 00:0d: iomem range 0xe4000-0xfffff could not be reserved
system 00:0d: iomem range 0xfec01000-0xfecfffff could not be reserved
system 00:0d: iomem range 0xfed00400-0xfed3ffff could not be reserved
system 00:0d: iomem range 0xfed40000-0xffffffff could not be reserved
system 00:0d: iomem range 0xf4000000-0xf7ffffff could not be reserved
system 00:0d: iomem range 0xce600-0xe3fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:20
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:30
pci 0000:00:1c.4: IO window: disabled
pci 0000:00:1c.4: MEM window: disabled
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:10
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 20 index 0 mmio: [0, 0]
bus: 20 index 1 mmio: [0, 0]
bus: 20 index 2 mmio: [0, 0]
bus: 20 index 3 mmio: [0, 0]
bus: 30 index 0 mmio: [0, 0]
bus: 30 index 1 mmio: [0, 0]
bus: 30 index 2 mmio: [0, 0]
bus: 30 index 3 mmio: [0, 0]
bus: 10 index 0 mmio: [0, 0]
bus: 10 index 1 mmio: [0, 0]
bus: 10 index 2 mmio: [0, 0]
bus: 10 index 3 io port: [0, ffff]
bus: 10 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Nov 20 2008 22:30:39) installed
msgmni has been set to 1714
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xe0000000, mapped to 0xf8d00000, using 3072k, total 32704k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0x1248 (irq = 17) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
ata4: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526280 irq 18
ata5: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526300 irq 18
ata6: DUMMY
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI _SDD failed (AE 0x5)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI _SDD failed (AE 0x5)
ata1.00: ACPI: failed the second time, disabled
ata1.00: configured for UDMA/100
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI _SDD failed (AE 0x5)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI _SDD failed (AE 0x5)
ata2.00: ACPI: failed the second time, disabled
ata2.00: configured for UDMA/100
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI _SDD failed (AE 0x5)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ACPI _SDD failed (AE 0x5)
ata3.00: ACPI: failed the second time, disabled
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-6 03.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 3:0:0:0: CD-ROM hp DVD RW AD-7251H5 1H8A PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD321HJ 1AC0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI disk
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
scsi8 : pata_legacy
ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
scsi9 : pata_legacy
ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0526800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.7-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0526c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.7-smp ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001160
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001180
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x000011a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011c0
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
raid6: int32x1 1054 MB/s
raid6: int32x2 982 MB/s
raid6: int32x4 805 MB/s
raid6: int32x8 763 MB/s
raid6: mmxx1 3515 MB/s
raid6: mmxx2 4061 MB/s
raid6: sse1x1 2451 MB/s
raid6: sse1x2 3164 MB/s
raid6: sse2x1 4587 MB/s
raid6: sse2x2 5224 MB/s
raid6: using algorithm sse2x2 (5224 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
md: Autodetecting RAID arrays.
md: Scanned 4 and added 4 devices.
md: autorun ...
md: considering sdb2 ...
md: adding sdb2 ...
md: sdb1 has different UUID to sdb2
md: adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md1
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md: kicking non-fresh sda1 from array!
md: unbind<sda1>
md: export_rdev(sda1)
raid1: raid set md0 active with 1 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 424k freed
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PBTN]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
ACPI: WMI: Mapper loaded
ACPI: Invalid PBLK length [7]
ACPI: SSDT DD7D17A9, 03AC (r1 COMPAQ CPU_TM2 1 MSFT 100000E)
ACPI: SSDT DD7D14F9, 02B0 (r1 COMPAQ CST 1 MSFT 100000E)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Invalid PBLK length [7]
Linux agpgart interface v0.103
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:01: registered as cooling_device1
ACPI: Invalid PBLK length [7]
ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:02: registered as cooling_device2
Marking TSC unstable due to possible TSC halt in C2
ACPI: Invalid PBLK length [7]
ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:03: registered as cooling_device3
ACPI Exception (video-1630): AE_NOT_FOUND, Evaluating _DOD [20080609]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/input/input4
ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI
Copyright(c) 1999 - 2010 Intel Corporation.
e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts. Falling back to legacy interrupts.
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
Clocksource tsc unstable (delta = -124277076 ns)
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:85:64:16:85:39
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 8, PBA No: FFFFFF-0FF
Adding 4947896k swap on /dev/md1. Priority:-1 extents:1 across:4947896k
fuse init (API version 7.9)
EXT3 FS on md0, internal journal
ppdev: user-space parallel port driver
lp: driver loaded but no devices found

19.04.2013 11:02 #315955

messages

Показать

Apr 17 12:57:21 sumo shutdown[3296]: shutting down for system reboot
Apr 17 12:57:22 sumo init: Switching to runlevel: 6
Apr 17 12:57:23 sumo /usr/sbin/gpm[4245]: *** info [mice.c(1766)]:
Apr 17 12:57:23 sumo /usr/sbin/gpm[4245]: imps2: Auto-detected intellimouse PS/2
Apr 17 12:57:25 sumo snmptrapd[18920]: 2013-04-17 12:57:25 NET-SNMP version 5.4.2.1 Stopped.
Apr 17 12:57:25 sumo snmptrapd[18920]: Stopping snmptrapd
Apr 17 12:57:28 sumo acpid: exiting
Apr 17 12:58:55 sumo kernel: at [c00f9bf0] 000f9bf0
Apr 17 12:58:55 sumo kernel: Zone PFN ranges:
Apr 17 12:58:55 sumo kernel: DMA 0x00000000 -> 0x00001000
Apr 17 12:58:55 sumo kernel: Normal 0x00001000 -> 0x00038000
Apr 17 12:58:55 sumo kernel: HighMem 0x00038000 -> 0x000dd7a1
Apr 17 12:58:55 sumo kernel: Movable zone start PFN for each node
Apr 17 12:58:55 sumo kernel: early_node_map[2] active PFN ranges
Apr 17 12:58:55 sumo kernel: 0: 0x00000000 -> 0x0000009f
Apr 17 12:58:55 sumo kernel: 0: 0x00000100 -> 0x000dd7a1
Apr 17 12:58:55 sumo kernel: ACPI: PM-Timer IO Port: 0xf808
Apr 17 12:58:55 sumo kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Apr 17 12:58:55 sumo kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Apr 17 12:58:55 sumo kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Apr 17 12:58:55 sumo kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
Apr 17 12:58:55 sumo kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Apr 17 12:58:55 sumo kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Apr 17 12:58:55 sumo kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Apr 17 12:58:55 sumo kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Apr 17 12:58:55 sumo kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Apr 17 12:58:55 sumo kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Apr 17 12:58:55 sumo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 17 12:58:55 sumo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 17 12:58:55 sumo kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Apr 17 12:58:55 sumo kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Apr 17 12:58:55 sumo kernel: Using ACPI (MADT) for SMP configuration information
Apr 17 12:58:55 sumo kernel: SMP: Allowing 4 CPUs, 0 hotplug CPUs
Apr 17 12:58:55 sumo kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Apr 17 12:58:55 sumo kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
Apr 17 12:58:55 sumo kernel: PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Apr 17 12:58:55 sumo kernel: Allocating PCI resources starting at e2000000 (gap: e0000000:14000000)
Apr 17 12:58:55 sumo kernel: PERCPU: Allocating 39452 bytes of per cpu data
Apr 17 12:58:55 sumo kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 899984
Apr 17 12:58:55 sumo kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=900 vt.default_utf8=0
Apr 17 12:58:55 sumo kernel: Enabling fast FPU save and restore... done.
Apr 17 12:58:55 sumo kernel: Enabling unmasked SIMD FPU exception support... done.
Apr 17 12:58:55 sumo kernel: Initializing CPU#0
Apr 17 12:58:55 sumo kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Apr 17 12:58:55 sumo kernel: TSC: PIT calibration confirmed by PMTIMER.
Apr 17 12:58:55 sumo kernel: TSC: using PIT calibration value
Apr 17 12:58:55 sumo kernel: Detected 2826.206 MHz processor.
Apr 17 12:58:55 sumo kernel: Console: colour dummy device 80x25
Apr 17 12:58:55 sumo kernel: console [tty0] enabled
Apr 17 12:58:55 sumo kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Apr 17 12:58:55 sumo kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 17 12:58:55 sumo kernel: Memory: 3588368k/3628676k available (6388k kernel code, 39056k reserved, 2148k data, 424k init, 2711172k highmem)
Apr 17 12:58:55 sumo kernel: virtual kernel memory layout:
Apr 17 12:58:55 sumo kernel: fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
Apr 17 12:58:55 sumo kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Apr 17 12:58:55 sumo kernel: vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Apr 17 12:58:55 sumo kernel: lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Apr 17 12:58:55 sumo kernel: .init : 0xc0963000 - 0xc09cd000 ( 424 kB)
Apr 17 12:58:55 sumo kernel: .data : 0xc073d137 - 0xc0956278 (2148 kB)
Apr 17 12:58:55 sumo kernel: .text : 0xc0100000 - 0xc073d137 (6388 kB)
Apr 17 12:58:55 sumo kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 17 12:58:55 sumo kernel: SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Apr 17 12:58:55 sumo kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5652.41 BogoMIPS (lpj=11304824)
Apr 17 12:58:55 sumo kernel: Security Framework initialized
Apr 17 12:58:55 sumo kernel: Mount-cache hash table entries: 512
Apr 17 12:58:55 sumo kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 17 12:58:55 sumo kernel: CPU: L2 cache: 3072K
Apr 17 12:58:55 sumo kernel: CPU: Physical Processor ID: 0
Apr 17 12:58:55 sumo kernel: CPU: Processor Core ID: 0
Apr 17 12:58:55 sumo kernel: Intel machine check architecture supported.
Apr 17 12:58:55 sumo kernel: Intel machine check reporting enabled on CPU#0.
Apr 17 12:58:55 sumo kernel: using mwait in idle threads.
Apr 17 12:58:55 sumo kernel: Checking 'hlt' instruction... OK.
Apr 17 12:58:55 sumo kernel: ACPI: Core revision 20080609
Apr 17 12:58:55 sumo kernel: ENABLING IO-APIC IRQs
Apr 17 12:58:55 sumo kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 17 12:58:55 sumo kernel: CPU0: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz stepping 0a
Apr 17 12:58:55 sumo kernel: Booting processor 1/1 ip 6000
Apr 17 12:58:55 sumo kernel: Initializing CPU#1
Apr 17 12:58:55 sumo kernel: Calibrating delay using timer specific routine.. 5652.41 BogoMIPS (lpj=11304832)
Apr 17 12:58:55 sumo kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 17 12:58:55 sumo kernel: CPU: L2 cache: 3072K
Apr 17 12:58:55 sumo kernel: CPU: Physical Processor ID: 0
Apr 17 12:58:55 sumo kernel: CPU: Processor Core ID: 1
Apr 17 12:58:55 sumo kernel: Intel machine check architecture supported.
Apr 17 12:58:55 sumo kernel: Intel machine check reporting enabled on CPU#1.
Apr 17 12:58:55 sumo kernel: CPU1: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz stepping 0a
Apr 17 12:58:55 sumo kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Apr 17 12:58:55 sumo kernel: Booting processor 2/3 ip 6000
Apr 17 12:58:55 sumo kernel: Initializing CPU#2
Apr 17 12:58:55 sumo kernel: Calibrating delay using timer specific routine.. 5652.44 BogoMIPS (lpj=11304881)
Apr 17 12:58:55 sumo kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 17 12:58:55 sumo kernel: CPU: L2 cache: 3072K
Apr 17 12:58:55 sumo kernel: CPU: Physical Processor ID: 0
Apr 17 12:58:55 sumo kernel: CPU: Processor Core ID: 3
Apr 17 12:58:55 sumo kernel: Intel machine check architecture supported.
Apr 17 12:58:55 sumo kernel: Intel machine check reporting enabled on CPU#2.
Apr 17 12:58:55 sumo kernel: CPU2: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz stepping 0a
Apr 17 12:58:55 sumo kernel: checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Apr 17 12:58:55 sumo kernel: Booting processor 3/2 ip 6000
Apr 17 12:58:55 sumo kernel: Initializing CPU#3
Apr 17 12:58:55 sumo kernel: Calibrating delay using timer specific routine.. 5652.43 BogoMIPS (lpj=11304871)
Apr 17 12:58:55 sumo kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 17 12:58:55 sumo kernel: CPU: L2 cache: 3072K
Apr 17 12:58:55 sumo kernel: CPU: Physical Processor ID: 0
Apr 17 12:58:55 sumo kernel: CPU: Processor Core ID: 2
Apr 17 12:58:55 sumo kernel: Intel machine check architecture supported.
Apr 17 12:58:55 sumo kernel: Intel machine check reporting enabled on CPU#3.
Apr 17 12:58:55 sumo kernel: CPU3: Intel(R) Core(TM)2 Quad CPU Q9500 @ 2.83GHz stepping 0a
Apr 17 12:58:55 sumo kernel: checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Apr 17 12:58:55 sumo kernel: Brought up 4 CPUs
Apr 17 12:58:55 sumo kernel: Total of 4 processors activated (22609.70 BogoMIPS).
Apr 17 12:58:55 sumo kernel: net_namespace: 776 bytes
Apr 17 12:58:55 sumo kernel: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
Apr 17 12:58:55 sumo kernel: xor: automatically using best checksumming function: pIII_sse
Apr 17 12:58:55 sumo kernel: pIII_sse : 10651.000 MB/sec
Apr 17 12:58:55 sumo kernel: xor: using function: pIII_sse (10651.000 MB/sec)
Apr 17 12:58:55 sumo kernel: NET: Registered protocol family 16
Apr 17 12:58:55 sumo kernel: No dock devices found.
Apr 17 12:58:55 sumo kernel: ACPI: bus type pci registered
Apr 17 12:58:55 sumo kernel: PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
Apr 17 12:58:55 sumo kernel: PCI: MCFG area at f4000000 reserved in E820
Apr 17 12:58:55 sumo kernel: PCI: Using MMCONFIG for extended config space
Apr 17 12:58:55 sumo kernel: PCI: Using configuration type 1 for base access
Apr 17 12:58:55 sumo kernel: ACPI: Interpreter enabled
Apr 17 12:58:55 sumo kernel: ACPI: (supports S0 S3 S4 S5)
Apr 17 12:58:55 sumo kernel: ACPI: Using IOAPIC for interrupt routing
Apr 17 12:58:55 sumo kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr 17 12:58:55 sumo kernel: pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
Apr 17 12:58:55 sumo kernel: pci 0000:00:03.0: PME# disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Apr 17 12:58:55 sumo kernel: pci 0000:00:19.0: PME# disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Apr 17 12:58:55 sumo kernel: pci 0000:00:1a.7: PME# disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Apr 17 12:58:55 sumo kernel: pci 0000:00:1b.0: PME# disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.0: PME# disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.4: PME# disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Apr 17 12:58:55 sumo kernel: pci 0000:00:1d.7: PME# disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1f.2: PME# supported from D3hot
Apr 17 12:58:55 sumo kernel: pci 0000:00:1f.2: PME# disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1e.0: transparent bridge
Apr 17 12:58:55 sumo kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
Apr 17 12:58:55 sumo kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
Apr 17 12:58:55 sumo kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
Apr 17 12:58:55 sumo kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
Apr 17 12:58:55 sumo kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15)
Apr 17 12:58:55 sumo kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
Apr 17 12:58:55 sumo kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
Apr 17 12:58:55 sumo kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
Apr 17 12:58:55 sumo kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Apr 17 12:58:55 sumo kernel: pnp: PnP ACPI init
Apr 17 12:58:55 sumo kernel: ACPI: bus type pnp registered
Apr 17 12:58:55 sumo kernel: pnp: PnP ACPI: found 14 devices
Apr 17 12:58:55 sumo kernel: ACPI: ACPI bus type pnp unregistered
Apr 17 12:58:55 sumo kernel: SCSI subsystem initialized
Apr 17 12:58:55 sumo kernel: usbcore: registered new interface driver usbfs
Apr 17 12:58:55 sumo kernel: usbcore: registered new interface driver hub
Apr 17 12:58:55 sumo kernel: usbcore: registered new device driver usb
Apr 17 12:58:55 sumo kernel: PCI: Using ACPI for IRQ routing
Apr 17 12:58:55 sumo kernel: tracer: 772 pages allocated for 65536 entries of 48 bytes
Apr 17 12:58:55 sumo kernel: actual entries 65620
Apr 17 12:58:55 sumo kernel: ACPI: RTC can wake from S4
Apr 17 12:58:55 sumo kernel: system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0b: ioport range 0xcb0-0xcbf has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0x400-0x41f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0x420-0x43f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0x440-0x45f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0x460-0x47f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0x800-0x87f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0x880-0x8ff has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xf800-0xf81f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xf820-0xf83f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xf840-0xf85f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xf860-0xf87f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xfa00-0xfa3f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xfc00-0xfc7f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xfc80-0xfcff has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xfe00-0xfe7f has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0c: ioport range 0xfe80-0xfeff has been reserved
Apr 17 12:58:55 sumo kernel: system 00:0d: iomem range 0x0-0x9ffff could not be reserved
Apr 17 12:58:55 sumo kernel: system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved
Apr 17 12:58:55 sumo kernel: system 00:0d: iomem range 0xe4000-0xfffff could not be reserved
Apr 17 12:58:55 sumo kernel: system 00:0d: iomem range 0xfec01000-0xfecfffff could not be reserved
Apr 17 12:58:55 sumo kernel: system 00:0d: iomem range 0xfed00400-0xfed3ffff could not be reserved
Apr 17 12:58:55 sumo kernel: system 00:0d: iomem range 0xfed40000-0xffffffff could not be reserved
Apr 17 12:58:55 sumo kernel: system 00:0d: iomem range 0xf4000000-0xf7ffffff could not be reserved
Apr 17 12:58:55 sumo kernel: system 00:0d: iomem range 0xce600-0xe3fff has been reserved
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:20
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.0: IO window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.0: MEM window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.0: PREFETCH window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.4: PCI bridge, secondary bus 0000:30
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.4: IO window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.4: MEM window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.4: PREFETCH window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:10
Apr 17 12:58:55 sumo kernel: pci 0000:00:1e.0: IO window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1e.0: MEM window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1e.0: PREFETCH window: disabled
Apr 17 12:58:55 sumo kernel: pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 17 12:58:55 sumo kernel: bus: 00 index 0 io port: [0, ffff]
Apr 17 12:58:55 sumo kernel: bus: 00 index 1 mmio: [0, ffffffff]
Apr 17 12:58:55 sumo kernel: bus: 20 index 0 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 20 index 1 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 20 index 2 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 20 index 3 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 30 index 0 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 30 index 1 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 30 index 2 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 30 index 3 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 10 index 0 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 10 index 1 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 10 index 2 mmio: [0, 0]
Apr 17 12:58:55 sumo kernel: bus: 10 index 3 io port: [0, ffff]
Apr 17 12:58:55 sumo kernel: bus: 10 index 4 mmio: [0, ffffffff]
Apr 17 12:58:55 sumo kernel: NET: Registered protocol family 2
Apr 17 12:58:55 sumo kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 17 12:58:55 sumo kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 17 12:58:55 sumo kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Apr 17 12:58:55 sumo kernel: TCP: Hash tables configured (established 131072 bind 65536)
Apr 17 12:58:55 sumo kernel: TCP reno registered
Apr 17 12:58:55 sumo kernel: NET: Registered protocol family 1
Apr 17 12:58:55 sumo kernel: highmem bounce pool size: 64 pages
Apr 17 12:58:55 sumo kernel: VFS: Disk quotas dquot_6.5.1
Apr 17 12:58:55 sumo kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 17 12:58:55 sumo kernel: NTFS driver 2.1.29 [Flags: R/W].
Apr 17 12:58:55 sumo kernel: JFS: nTxBlock = 8192, nTxLock = 65536
Apr 17 12:58:55 sumo kernel: SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
Apr 17 12:58:55 sumo kernel: SGI XFS Quota Management subsystem
Apr 17 12:58:55 sumo kernel: GFS2 (built Nov 20 2008 22:30:39) installed
Apr 17 12:58:55 sumo kernel: msgmni has been set to 1714
Apr 17 12:58:55 sumo kernel: async_tx: api initialized (async)
Apr 17 12:58:55 sumo kernel: io scheduler noop registered
Apr 17 12:58:55 sumo kernel: io scheduler anticipatory registered
Apr 17 12:58:55 sumo kernel: io scheduler deadline registered
Apr 17 12:58:55 sumo kernel: io scheduler cfq registered (default)
Apr 17 12:58:55 sumo kernel: pcieport-driver 0000:00:1c.0: found MSI capability
Apr 17 12:58:55 sumo kernel: pcieport-driver 0000:00:1c.4: found MSI capability
Apr 17 12:58:55 sumo kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr 17 12:58:55 sumo kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xf8d00000, using 3072k, total 32704k
Apr 17 12:58:55 sumo kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=20
Apr 17 12:58:55 sumo kernel: vesafb: scrolling: redraw
Apr 17 12:58:55 sumo kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Apr 17 12:58:55 sumo kernel: Console: switching to colour frame buffer device 128x48
Apr 17 12:58:55 sumo kernel: fb0: VESA VGA frame buffer device
Apr 17 12:58:55 sumo kernel: isapnp: Scanning for PnP cards...
Apr 17 12:58:55 sumo kernel: isapnp: No Plug & Play device found
Apr 17 12:58:55 sumo kernel: Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Apr 17 12:58:55 sumo kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 17 12:58:55 sumo kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 17 12:58:55 sumo kernel: serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 17 12:58:55 sumo kernel: 0000:00:03.3: ttyS1 at I/O 0x1248 (irq = 17) is a 16550A
Apr 17 12:58:55 sumo kernel: floppy0: no floppy controllers found
Apr 17 12:58:55 sumo kernel: brd: module loaded
Apr 17 12:58:55 sumo kernel: loop: module loaded
Apr 17 12:58:55 sumo kernel: Compaq SMART2 Driver (v 2.6.0)
Apr 17 12:58:55 sumo kernel: HP CISS Driver (v 3.6.20)
Apr 17 12:58:55 sumo kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Apr 17 12:58:55 sumo kernel: Uniform Multi-Platform E-IDE driver
Apr 17 12:58:55 sumo kernel: ide-floppy driver 1.00
Apr 17 12:58:55 sumo kernel: Loading iSCSI transport class v2.0-870.
Apr 17 12:58:55 sumo kernel: rdac: device handler registered
Apr 17 12:58:55 sumo kernel: hp_sw: device handler registered
Apr 17 12:58:55 sumo kernel: emc: device handler registered
Apr 17 12:58:55 sumo kernel: alua: device handler registered
Apr 17 12:58:55 sumo kernel: Loading Adaptec I2O RAID: Version 2.4 Build 5go
Apr 17 12:58:55 sumo kernel: Detecting Adaptec I2O RAID controllers...
Apr 17 12:58:55 sumo kernel: Adaptec aacraid driver 1.1-5[2456]-ms
Apr 17 12:58:55 sumo kernel: aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
Apr 17 12:58:55 sumo kernel: scsi: <fdomain> Detection failed (no card)
Apr 17 12:58:55 sumo kernel: sym53c416.c: Version 1.0.0-ac
Apr 17 12:58:55 sumo kernel: qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
Apr 17 12:58:55 sumo kernel: iscsi: registered transport (qla4xxx)
Apr 17 12:58:55 sumo kernel: QLogic iSCSI HBA Driver
Apr 17 12:58:55 sumo kernel: Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Apr 17 12:58:55 sumo kernel: Copyright(c) 2004-2008 Emulex. All rights reserved.
Apr 17 12:58:55 sumo kernel: Failed initialization of WD-7000 SCSI card!
Apr 17 12:58:55 sumo kernel: DC390: clustering now enabled by default. If you get problems load
Apr 17 12:58:55 sumo kernel: with "disable_clustering=1" and report to maintainers
Apr 17 12:58:55 sumo kernel: megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
Apr 17 12:58:55 sumo kernel: megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
Apr 17 12:58:55 sumo kernel: megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
Apr 17 12:58:55 sumo kernel: GDT-HA: Storage RAID Controller Driver. Version: 3.05
Apr 17 12:58:55 sumo kernel: 3ware Storage Controller device driver for Linux v1.26.02.002.
Apr 17 12:58:55 sumo kernel: 3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
Apr 17 12:58:55 sumo kernel: nsp32: loading...
Apr 17 12:58:55 sumo kernel: ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
Apr 17 12:58:55 sumo kernel: RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
Apr 17 12:58:55 sumo kernel: stex: Promise SuperTrak EX Driver version: 3.6.0000.1
Apr 17 12:58:55 sumo kernel: st: Version 20080504, fixed bufsize 32768, s/g segs 256
Apr 17 12:58:55 sumo kernel: Driver 'st' needs updating - please use bus_type methods
Apr 17 12:58:55 sumo kernel: Driver 'sd' needs updating - please use bus_type methods
Apr 17 12:58:55 sumo kernel: Driver 'sr' needs updating - please use bus_type methods
Apr 17 12:58:55 sumo kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
Apr 17 12:58:55 sumo kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1f impl SATA mode
Apr 17 12:58:55 sumo kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
Apr 17 12:58:55 sumo kernel: scsi2 : ahci
Apr 17 12:58:55 sumo kernel: scsi3 : ahci
Apr 17 12:58:55 sumo kernel: scsi4 : ahci
Apr 17 12:58:55 sumo kernel: scsi5 : ahci
Apr 17 12:58:55 sumo kernel: scsi6 : ahci
Apr 17 12:58:55 sumo kernel: scsi7 : ahci
Apr 17 12:58:55 sumo kernel: ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
Apr 17 12:58:55 sumo kernel: ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
Apr 17 12:58:55 sumo kernel: ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
Apr 17 12:58:55 sumo kernel: ata4: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526280 irq 18
Apr 17 12:58:55 sumo kernel: ata5: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526300 irq 18
Apr 17 12:58:55 sumo kernel: ata6: DUMMY
Apr 17 12:58:55 sumo kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 17 12:58:55 sumo kernel: ata1.00: ACPI _SDD failed (AE 0x5)
Apr 17 12:58:55 sumo kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 17 12:58:55 sumo kernel: ata1.00: ACPI _SDD failed (AE 0x5)
Apr 17 12:58:55 sumo kernel: ata1.00: ACPI: failed the second time, disabled
Apr 17 12:58:55 sumo kernel: ata1.00: configured for UDMA/100
Apr 17 12:58:55 sumo kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 17 12:58:55 sumo kernel: ata2.00: ACPI _SDD failed (AE 0x5)
Apr 17 12:58:55 sumo kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr 17 12:58:55 sumo kernel: ata2.00: ACPI _SDD failed (AE 0x5)
Apr 17 12:58:55 sumo kernel: ata2.00: ACPI: failed the second time, disabled
Apr 17 12:58:55 sumo kernel: ata2.00: configured for UDMA/100
Apr 17 12:58:55 sumo kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 17 12:58:55 sumo kernel: ata3.00: ACPI _SDD failed (AE 0x5)
Apr 17 12:58:55 sumo kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 17 12:58:55 sumo kernel: ata3.00: ACPI _SDD failed (AE 0x5)
Apr 17 12:58:55 sumo kernel: ata3.00: ACPI: failed the second time, disabled
Apr 17 12:58:55 sumo kernel: ata3.00: configured for UDMA/100
Apr 17 12:58:55 sumo kernel: ata4: SATA link down (SStatus 0 SControl 300)
Apr 17 12:58:55 sumo kernel: ata5: SATA link down (SStatus 0 SControl 300)
Apr 17 12:58:55 sumo kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-6 03.0 PQ: 0 ANSI: 5
Apr 17 12:58:55 sumo kernel: sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
Apr 17 12:58:55 sumo kernel: sd 2:0:0:0: [sda] Write Protect is off
Apr 17 12:58:55 sumo kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 17 12:58:55 sumo kernel: sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
Apr 17 12:58:55 sumo kernel: sd 2:0:0:0: [sda] Write Protect is off
Apr 17 12:58:55 sumo kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 17 12:58:55 sumo kernel: sda: sda1 sda2
Apr 17 12:58:55 sumo kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Apr 17 12:58:55 sumo kernel: scsi 3:0:0:0: CD-ROM hp DVD RW AD-7251H5 1H8A PQ: 0 ANSI: 5
Apr 17 12:58:55 sumo kernel: sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Apr 17 12:58:55 sumo kernel: Uniform CD-ROM driver Revision: 3.20
Apr 17 12:58:55 sumo kernel: scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD321HJ 1AC0 PQ: 0 ANSI: 5
Apr 17 12:58:55 sumo kernel: sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Apr 17 12:58:55 sumo kernel: sd 4:0:0:0: [sdb] Write Protect is off
Apr 17 12:58:55 sumo kernel: sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 17 12:58:55 sumo kernel: sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Apr 17 12:58:55 sumo kernel: sd 4:0:0:0: [sdb] Write Protect is off
Apr 17 12:58:55 sumo kernel: sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 17 12:58:55 sumo kernel: sdb: sdb1 sdb2
Apr 17 12:58:55 sumo kernel: sd 4:0:0:0: [sdb] Attached SCSI disk
Apr 17 12:58:55 sumo kernel: pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 17 12:58:55 sumo kernel: pata_acpi 0000:00:03.2: PCI INT C disabled
Apr 17 12:58:55 sumo kernel: scsi8 : pata_legacy
Apr 17 12:58:55 sumo kernel: ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
Apr 17 12:58:55 sumo kernel: scsi9 : pata_legacy
Apr 17 12:58:55 sumo kernel: ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
Apr 17 12:58:55 sumo kernel: I2O subsystem v1.325
Apr 17 12:58:55 sumo kernel: i2o: max drivers = 8
Apr 17 12:58:55 sumo kernel: I2O Configuration OSM v1.323
Apr 17 12:58:55 sumo kernel: I2O Bus Adapter OSM v1.317
Apr 17 12:58:55 sumo kernel: I2O Block Device OSM v1.325
Apr 17 12:58:55 sumo kernel: I2O SCSI Peripheral OSM v1.316
Apr 17 12:58:55 sumo kernel: I2O ProcFS OSM v1.316
Apr 17 12:58:55 sumo kernel: Fusion MPT base driver 3.04.07
Apr 17 12:58:55 sumo kernel: Copyright (c) 1999-2008 LSI Corporation
Apr 17 12:58:55 sumo kernel: Fusion MPT SPI Host driver 3.04.07
Apr 17 12:58:55 sumo kernel: Fusion MPT FC Host driver 3.04.07
Apr 17 12:58:55 sumo kernel: Fusion MPT SAS Host driver 3.04.07
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1a.7: debug port 1
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0526800
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Apr 17 12:58:55 sumo kernel: usb usb1: configuration #1 chosen from 1 choice
Apr 17 12:58:55 sumo kernel: hub 1-0:1.0: USB hub found
Apr 17 12:58:55 sumo kernel: hub 1-0:1.0: 6 ports detected
Apr 17 12:58:55 sumo kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr 17 12:58:55 sumo kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 12:58:55 sumo kernel: usb usb1: Product: EHCI Host Controller
Apr 17 12:58:55 sumo kernel: usb usb1: Manufacturer: Linux 2.6.27.7-smp ehci_hcd
Apr 17 12:58:55 sumo kernel: usb usb1: SerialNumber: 0000:00:1a.7
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1d.7: debug port 1
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0526c00
Apr 17 12:58:55 sumo kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Apr 17 12:58:55 sumo kernel: usb usb2: configuration #1 chosen from 1 choice
Apr 17 12:58:55 sumo kernel: hub 2-0:1.0: USB hub found
Apr 17 12:58:55 sumo kernel: hub 2-0:1.0: 6 ports detected
Apr 17 12:58:55 sumo kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Apr 17 12:58:55 sumo kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 12:58:55 sumo kernel: usb usb2: Product: EHCI Host Controller
Apr 17 12:58:55 sumo kernel: usb usb2: Manufacturer: Linux 2.6.27.7-smp ehci_hcd
Apr 17 12:58:55 sumo kernel: usb usb2: SerialNumber: 0000:00:1d.7
Apr 17 12:58:55 sumo kernel: 116x: driver isp116x-hcd, 03 Nov 2005
Apr 17 12:58:55 sumo kernel: USB Universal Host Controller Interface driver v3.0
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120
Apr 17 12:58:55 sumo kernel: usb usb3: configuration #1 chosen from 1 choice
Apr 17 12:58:55 sumo kernel: hub 3-0:1.0: USB hub found
Apr 17 12:58:55 sumo kernel: hub 3-0:1.0: 2 ports detected
Apr 17 12:58:55 sumo kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 12:58:55 sumo kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 12:58:55 sumo kernel: usb usb3: Product: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: usb usb3: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
Apr 17 12:58:55 sumo kernel: usb usb3: SerialNumber: 0000:00:1a.0
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140
Apr 17 12:58:55 sumo kernel: usb usb4: configuration #1 chosen from 1 choice
Apr 17 12:58:55 sumo kernel: hub 4-0:1.0: USB hub found
Apr 17 12:58:55 sumo kernel: hub 4-0:1.0: 2 ports detected
Apr 17 12:58:55 sumo kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 12:58:55 sumo kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 12:58:55 sumo kernel: usb usb4: Product: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: usb usb4: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
Apr 17 12:58:55 sumo kernel: usb usb4: SerialNumber: 0000:00:1a.1
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001160
Apr 17 12:58:55 sumo kernel: usb usb5: configuration #1 chosen from 1 choice
Apr 17 12:58:55 sumo kernel: hub 5-0:1.0: USB hub found
Apr 17 12:58:55 sumo kernel: hub 5-0:1.0: 2 ports detected
Apr 17 12:58:55 sumo kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 12:58:55 sumo kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 12:58:55 sumo kernel: usb usb5: Product: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: usb usb5: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
Apr 17 12:58:55 sumo kernel: usb usb5: SerialNumber: 0000:00:1a.2
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001180
Apr 17 12:58:55 sumo kernel: usb usb6: configuration #1 chosen from 1 choice
Apr 17 12:58:55 sumo kernel: hub 6-0:1.0: USB hub found
Apr 17 12:58:55 sumo kernel: hub 6-0:1.0: 2 ports detected
Apr 17 12:58:55 sumo kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 12:58:55 sumo kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 12:58:55 sumo kernel: usb usb6: Product: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: usb usb6: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
Apr 17 12:58:55 sumo kernel: usb usb6: SerialNumber: 0000:00:1d.0
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.1: irq 21, io base 0x000011a0
Apr 17 12:58:55 sumo kernel: usb usb7: configuration #1 chosen from 1 choice
Apr 17 12:58:55 sumo kernel: hub 7-0:1.0: USB hub found
Apr 17 12:58:55 sumo kernel: hub 7-0:1.0: 2 ports detected
Apr 17 12:58:55 sumo kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 12:58:55 sumo kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 12:58:55 sumo kernel: usb usb7: Product: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: usb usb7: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
Apr 17 12:58:55 sumo kernel: usb usb7: SerialNumber: 0000:00:1d.1
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Apr 17 12:58:55 sumo kernel: uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011c0
Apr 17 12:58:55 sumo kernel: usb usb8: configuration #1 chosen from 1 choice
Apr 17 12:58:55 sumo kernel: hub 8-0:1.0: USB hub found
Apr 17 12:58:55 sumo kernel: hub 8-0:1.0: 2 ports detected
Apr 17 12:58:55 sumo kernel: usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 12:58:55 sumo kernel: usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 12:58:55 sumo kernel: usb usb8: Product: UHCI Host Controller
Apr 17 12:58:55 sumo kernel: usb usb8: Manufacturer: Linux 2.6.27.7-smp uhci_hcd
Apr 17 12:58:55 sumo kernel: usb usb8: SerialNumber: 0000:00:1d.2
Apr 17 12:58:55 sumo kernel: sl811: driver sl811-hcd, 19 May 2005
Apr 17 12:58:55 sumo kernel: Initializing USB Mass Storage driver...
Apr 17 12:58:55 sumo kernel: usbcore: registered new interface driver usb-storage
Apr 17 12:58:55 sumo kernel: USB Mass Storage support registered.
Apr 17 12:58:55 sumo kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
Apr 17 12:58:55 sumo kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 17 12:58:55 sumo kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Apr 17 12:58:55 sumo kernel: mice: PS/2 mouse device common for all mice
Apr 17 12:58:55 sumo kernel: i2c /dev entries driver
Apr 17 12:58:55 sumo kernel: md: linear personality registered for level -1
Apr 17 12:58:55 sumo kernel: md: raid0 personality registered for level 0
Apr 17 12:58:55 sumo kernel: md: raid1 personality registered for level 1
Apr 17 12:58:55 sumo kernel: md: raid10 personality registered for level 10
Apr 17 12:58:55 sumo kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Apr 17 12:58:55 sumo kernel: raid6: int32x1 1054 MB/s
Apr 17 12:58:55 sumo kernel: raid6: int32x2 982 MB/s
Apr 17 12:58:55 sumo kernel: raid6: int32x4 805 MB/s
Apr 17 12:58:55 sumo kernel: raid6: int32x8 763 MB/s
Apr 17 12:58:55 sumo kernel: raid6: mmxx1 3515 MB/s
Apr 17 12:58:55 sumo kernel: raid6: mmxx2 4061 MB/s
Apr 17 12:58:55 sumo kernel: raid6: sse1x1 2451 MB/s
Apr 17 12:58:55 sumo kernel: raid6: sse1x2 3164 MB/s
Apr 17 12:58:55 sumo kernel: raid6: sse2x1 4587 MB/s
Apr 17 12:58:55 sumo kernel: raid6: sse2x2 5224 MB/s
Apr 17 12:58:55 sumo kernel: raid6: using algorithm sse2x2 (5224 MB/s)
Apr 17 12:58:55 sumo kernel: md: raid6 personality registered for level 6
Apr 17 12:58:55 sumo kernel: md: raid5 personality registered for level 5
Apr 17 12:58:55 sumo kernel: md: raid4 personality registered for level 4
Apr 17 12:58:55 sumo kernel: md: multipath personality registered for level -4
Apr 17 12:58:55 sumo kernel: device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Apr 17 12:58:55 sumo kernel: usbcore: registered new interface driver hiddev
Apr 17 12:58:55 sumo kernel: usbcore: registered new interface driver usbhid
Apr 17 12:58:55 sumo kernel: usbhid: v2.6:USB HID core driver
Apr 17 12:58:55 sumo kernel: TCP cubic registered
Apr 17 12:58:55 sumo kernel: Initializing XFRM netlink socket
Apr 17 12:58:55 sumo kernel: NET: Registered protocol family 17
Apr 17 12:58:55 sumo kernel: RPC: Registered udp transport module.
Apr 17 12:58:55 sumo kernel: RPC: Registered tcp transport module.
Apr 17 12:58:55 sumo kernel: Using IPI No-Shortcut mode
Apr 17 12:58:55 sumo kernel: md: Autodetecting RAID arrays.
Apr 17 12:58:55 sumo kernel: md: Scanned 4 and added 4 devices.
Apr 17 12:58:55 sumo kernel: md: autorun ...
Apr 17 12:58:55 sumo kernel: md: considering sdb2 ...
Apr 17 12:58:55 sumo kernel: md: adding sdb2 ...
Apr 17 12:58:55 sumo kernel: md: sdb1 has different UUID to sdb2
Apr 17 12:58:55 sumo kernel: md: adding sda2 ...
Apr 17 12:58:55 sumo kernel: md: sda1 has different UUID to sdb2
Apr 17 12:58:55 sumo kernel: md: created md1
Apr 17 12:58:55 sumo kernel: md: bind<sda2>
Apr 17 12:58:55 sumo kernel: md: bind<sdb2>
Apr 17 12:58:55 sumo kernel: md: running: <sdb2><sda2>
Apr 17 12:58:55 sumo kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Apr 17 12:58:55 sumo kernel: md: considering sdb1 ...
Apr 17 12:58:55 sumo kernel: md: adding sdb1 ...
Apr 17 12:58:55 sumo kernel: md: adding sda1 ...
Apr 17 12:58:55 sumo kernel: md: created md0
Apr 17 12:58:55 sumo kernel: md: bind<sda1>
Apr 17 12:58:55 sumo kernel: md: bind<sdb1>
Apr 17 12:58:55 sumo kernel: md: running: <sdb1><sda1>
Apr 17 12:58:55 sumo kernel: md: kicking non-fresh sda1 from array!
Apr 17 12:58:55 sumo kernel: md: unbind<sda1>
Apr 17 12:58:55 sumo kernel: md: export_rdev(sda1)
Apr 17 12:58:55 sumo kernel: raid1: raid set md0 active with 1 out of 2 mirrors
Apr 17 12:58:55 sumo kernel: md: ... autorun DONE.
Apr 17 12:58:55 sumo kernel: kjournald starting. Commit interval 5 seconds
Apr 17 12:58:55 sumo kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 17 12:58:55 sumo kernel: VFS: Mounted root (ext3 filesystem) readonly.
Apr 17 12:58:55 sumo kernel: Freeing unused kernel memory: 424k freed
Apr 17 12:58:55 sumo kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
Apr 17 12:58:55 sumo kernel: sr 3:0:0:0: Attached scsi generic sg1 type 5
Apr 17 12:58:55 sumo kernel: sd 4:0:0:0: Attached scsi generic sg2 type 0
Apr 17 12:58:55 sumo kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Apr 17 12:58:55 sumo kernel: ACPI: Power Button (FF) [PWRF]
Apr 17 12:58:55 sumo kernel: input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Apr 17 12:58:55 sumo kernel: ACPI: Power Button (CM) [PBTN]
Apr 17 12:58:55 sumo kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Apr 17 12:58:55 sumo kernel: hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
Apr 17 12:58:55 sumo kernel: ACPI: WMI: Mapper loaded
Apr 17 12:58:55 sumo kernel: ACPI: Invalid PBLK length [7]
Apr 17 12:58:55 sumo kernel: ACPI: SSDT DD7D17A9, 03AC (r1 COMPAQ CPU_TM2 1 MSFT 100000E)
Apr 17 12:58:55 sumo kernel: ACPI: SSDT DD7D14F9, 02B0 (r1 COMPAQ CST 1 MSFT 100000E)
Apr 17 12:58:55 sumo kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Apr 17 12:58:55 sumo kernel: processor ACPI0007:00: registered as cooling_device0
Apr 17 12:58:55 sumo kernel: ACPI: Invalid PBLK length [7]
Apr 17 12:58:55 sumo kernel: Linux agpgart interface v0.103
Apr 17 12:58:55 sumo kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Apr 17 12:58:55 sumo kernel: processor ACPI0007:01: registered as cooling_device1
Apr 17 12:58:55 sumo kernel: ACPI: Invalid PBLK length [7]
Apr 17 12:58:55 sumo kernel: ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
Apr 17 12:58:55 sumo kernel: processor ACPI0007:02: registered as cooling_device2
Apr 17 12:58:55 sumo kernel: Marking TSC unstable due to possible TSC halt in C2
Apr 17 12:58:55 sumo kernel: ACPI: Invalid PBLK length [7]
Apr 17 12:58:55 sumo kernel: ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
Apr 17 12:58:55 sumo kernel: processor ACPI0007:03: registered as cooling_device3
Apr 17 12:58:55 sumo kernel: ACPI Exception (video-1630): AE_NOT_FOUND, Evaluating _DOD [20080609]
Apr 17 12:58:55 sumo kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/input/input4
Apr 17 12:58:55 sumo kernel: ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
Apr 17 12:58:55 sumo kernel: agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
Apr 17 12:58:55 sumo kernel: agpgart-intel 0000:00:00.0: detected 32764K stolen memory
Apr 17 12:58:55 sumo kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Apr 17 12:58:55 sumo kernel: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI
Apr 17 12:58:55 sumo kernel: Copyright(c) 1999 - 2010 Intel Corporation.
Apr 17 12:58:55 sumo kernel: e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 17 12:58:55 sumo kernel: e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts. Falling back to legacy interrupts.
Apr 17 12:58:55 sumo kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
Apr 17 12:58:55 sumo kernel: Clocksource tsc unstable (delta = -124277076 ns)
Apr 17 12:58:55 sumo kernel: e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) d4:85:64:16:85:39
Apr 17 12:58:55 sumo kernel: e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
Apr 17 12:58:55 sumo kernel: e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 8, PBA No: FFFFFF-0FF
Apr 17 12:58:55 sumo kernel: Adding 4947896k swap on /dev/md1. Priority:-1 extents:1 across:4947896k
Apr 17 12:58:55 sumo kernel: fuse init (API version 7.9)
Apr 17 12:58:55 sumo kernel: EXT3 FS on md0, internal journal
Apr 17 12:58:55 sumo kernel: ppdev: user-space parallel port driver
Apr 17 12:58:55 sumo kernel: lp: driver loaded but no devices found
Apr 17 12:58:57 sumo rpc.statd[2932]: Version 1.1.4 Starting
Apr 17 12:58:58 sumo kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Apr 17 12:58:59 sumo kernel:
Apr 17 12:59:00 sumo ntpd[3041]: ntpd 4.2.4p5@1.1541-o Wed Nov 26 04:30:18 UTC 2008 (1)
Apr 17 12:59:00 sumo ntpd[3042]: precision = 1.000 usec
Apr 17 12:59:00 sumo ntpd[3042]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Apr 17 12:59:00 sumo ntpd[3042]: Listening on interface #1 wildcard, ::#123 Disabled
Apr 17 12:59:00 sumo ntpd[3042]: Listening on interface #2 lo, ::1#123 Enabled
Apr 17 12:59:00 sumo ntpd[3042]: Listening on interface #3 lo, 127.0.0.1#123 Enabled
Apr 17 12:59:00 sumo ntpd[3042]: kernel time sync status 0040
Apr 17 12:59:00 sumo acpid: starting up
Apr 17 12:59:00 sumo acpid: 1 rule loaded
Apr 17 12:59:00 sumo acpid: waiting for events: event logging is off
Apr 17 12:59:11 sumo acpid: client connected from 3120[82:82]
Apr 17 12:59:11 sumo acpid: 1 client rule loaded
Apr 17 12:59:12 sumo dnsmasq[3139]: started, version 2.46 cachesize 150
Apr 17 12:59:12 sumo dnsmasq[3139]: compile time options: IPv6 GNU-getopt no-DBus I18N TFTP
Apr 17 12:59:12 sumo dnsmasq[3139]: no servers found in /etc/resolv.conf, will retry
Apr 17 12:59:12 sumo dnsmasq[3139]: read /etc/hosts - 2 addresses
Apr 17 12:59:28 sumo kernel: 48:84:ab:80 R=00153DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:00:17 sumo sendmail[4030]: r3H90HbI004030: from=admin, size=164, class=0, nrcpts=1, msgid=<201304170900.r3H90HbI004030@sumo.ru>, relay=admin@localhost
Apr 17 13:00:17 sumo sendmail[4030]: r3H90HbI004030: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30164, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:00:22 sumo snmptrapd[4093]: /usr/als-sumo/net-snmp/snmptrapd.conf: line 18: Warning: Unknown token: arguments:.
Apr 17 13:00:22 sumo snmptrapd[4094]: NET-SNMP version 5.4.2.1
Apr 17 13:00:23 sumo /usr/sbin/gpm[4135]: *** info [startup.c(95)]:
Apr 17 13:00:23 sumo /usr/sbin/gpm[4135]: Started gpm successfully. Entered daemon mode.
Apr 17 13:00:23 sumo /usr/sbin/gpm[4135]: *** info [mice.c(1766)]:
Apr 17 13:00:23 sumo /usr/sbin/gpm[4135]: imps2: Auto-detected intellimouse PS/2
Apr 17 13:00:25 sumo acpid: client connected from 4157[0:0]
Apr 17 13:00:25 sumo acpid: 1 client rule loaded
Apr 17 13:00:32 sumo kdm_greet[4256]: Can't open default user face
Apr 17 13:01:01 sumo kernel: O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:02:45 sumo kernel: Neh U=MCd:56:68:95:99:07:60:0SC1..4.3DT1.1.514LN7 O=x8PEC00 T=0I= FPOOUPST13DT13LN5 0SC1..4.5DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:05:13 sumo kernel: 95:99:0ab:80 R=00151 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 :I=t0OT A=48:41:53:48:84:ab:80 R=00153 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 :I=t0OT A=48:41:53:48:84:ab:80 R=00154 S=0161.9 E=76 TS00 RC00 T=0I= FPOOUPST13DT13LN5 60:0SC1218171DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:05:26 sumo sendmail[18828]: r3H95QDD018828: from=admin, size=206, class=0, nrcpts=1, msgid=<201304170905.r3H95QDD018828@sumo.ru>, relay=admin@localhost
Apr 17 13:05:26 sumo sendmail[18828]: r3H95QDD018828: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30206, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:06:26 sumo kernel: 41:53:48:84:ab:80 R=001482 DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E= =MCd:56:68:948:84:ab:80 R=00153 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 7>IPTpces Neh U=MCd:56:68:95:99:07:60:0SC1..3.3 S=0161.9 E=6TS00 RC=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:06:33 sumo kernel: E=6
Apr 17 13:10:16 sumo sendmail[16476]: r3H9AGft016476: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170910.r3H9AGft016476@sumo.ru>, relay=admin@localhost
Apr 17 13:10:16 sumo sendmail[16476]: r3H9AGft016476: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:12:22 sumo kernel: FPOOUPST13DT13LN5 pckt:I=t0OT A=48:41:53:48:84:ab:80 R=001014DT1.1.514LN7 O=00 RC00 T=0I= FPOOUPST13DT13LN5 T1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:15:16 sumo sendmail[10720]: r3H9FGov010720: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170915.r3H9FGov010720@sumo.ru>, relay=admin@localhost
Apr 17 13:15:16 sumo sendmail[10720]: r3H9FGov010720: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:15:46 sumo kernel: 56:68:95:99:07:60:0SC1..3.3 S=0.161.9 E=6TS00 RC00 T=1I= FPOOUPST13DT13LN5 <>INPUT akt:I=t0OT A=48:41:53:48:84:ab:80 R=00157DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:17:30 sumo kernel: akt:I=t0OT A=48:41:53:48:84:ab:80 R=00146 S=0161.9 E=6TS00 PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:19:01 sumo kernel: P=2 P=2 E=6
Apr 17 13:20:16 sumo sendmail[4626]: r3H9KG35004626: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170920.r3H9KG35004626@sumo.ru>, relay=admin@localhost
Apr 17 13:20:17 sumo sendmail[4626]: r3H9KG35004626: to=admin, ctladdr=admin (500/100), delay=00:00:01, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:22:30 sumo kernel: 68:95:99:07:60:0SC1..4.15 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 RT=D P=2 P=2 E=6
Apr 17 13:25:16 sumo sendmail[31743]: r3H9PGPc031743: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170925.r3H9PGPc031743@sumo.ru>, relay=admin@localhost
Apr 17 13:25:16 sumo sendmail[31743]: r3H9PGPc031743: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:25:16 sumo kernel: RC00 T=0I= FPOOUPST13DT13LN5 48:84:ab:80 R=00176 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 :68:95:99:07:60:0SC1..471 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 pces Neh U=MCd:56:68:95:99:07:60:0SC1..4.7DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:27:42 sumo kernel: 99:07:60:0SC1..4.5 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 0D RT=D P=2 P=2 E=6
Apr 17 13:30:16 sumo sendmail[25846]: r3H9UGkI025846: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170930.r3H9UGkI025846@sumo.ru>, relay=admin@localhost
Apr 17 13:30:16 sumo sendmail[25846]: r3H9UGkI025846: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:32:53 sumo kernel: I=t0OT A=48:41:53:48:84:ab:80 R=00177DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:33:01 sumo kernel: Neh U=MCd:56:68:95:99:07:60:0SC1..4.3 S=0161.9 E=6TO=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:34:14 sumo kernel: 0SC1..4.3 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 <>INU akt:I=t0OT A=48:41:53:48:84:ab:80 R=001018DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:35:16 sumo sendmail[19938]: r3H9ZGb5019938: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170935.r3H9ZGb5019938@sumo.ru>, relay=admin@localhost
Apr 17 13:35:16 sumo sendmail[19938]: r3H9ZGb5019938: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:35:26 sumo kernel: U=MCd:56:68:95:99:07:60:0SC1..4.3 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 <7>INPUT packets: IN=eth0 OUT= MAC=d4:85:64:16:85:39:54:89:98:40:7a:b6:08:00 SRC=10.0.144.68 DST=10.116.15.194 LEN=76 TOS=0x08 PREC=0x00 TTL=60 ID=0 DF PROTO=UDP SPT=123 DPT=123 LEN=56
Apr 17 13:37:02 sumo kernel: 56:68:95:99:07:60:0SC1..4.7DT=1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:38:42 sumo kernel:
Apr 17 13:39:30 sumo kernel: T=0I= FPOOUPST13DT13LN5 <7>INPUT packets: IN=eth0 OUT= MAC=d4:85:64:16:85:39:54:89:98:40:7a:b6:08:00 SRC=10.0.138.133DST=1.1.514LN7 O=x0PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:40:16 sumo sendmail[14683]: r3H9eGj0014683: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170940.r3H9eGj0014683@sumo.ru>, relay=admin@localhost
Apr 17 13:40:16 sumo sendmail[14683]: r3H9eGj0014683: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:42:18 sumo kernel: Neh U=MCd:56:68:95:99:07:60:0SC1..4.8DT1.1.514LN7 O=00 RC00 T=0I= FPT=D P=2 P=2 E=6
Apr 17 13:42:55 sumo kernel: 56:68:95:99:07:60:0SC1..4.8DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:45:16 sumo sendmail[8858]: r3H9jGms008858: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170945.r3H9jGms008858@sumo.ru>, relay=admin@localhost
Apr 17 13:45:17 sumo sendmail[8858]: r3H9jGms008858: to=admin, ctladdr=admin (500/100), delay=00:00:01, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:45:42 sumo kernel: :80 R=003.3 S=0161.9 E=6TS00 RC00 T=1I= FPOOUPST13DT13LN5 =MCd:56:68:95:84:ab:80 R=00146 S=0.161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 Neh U=MCd:56:68:95:99:07:60:0SC1..4.8DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:47:38 sumo kernel: Neh U=MCd:56:68:95:99:07:60:0SC1..4.9DT1.1.514LN7 O=00 RC00 T=0I= FPOOUPST13DT13LN5 :0SC1..4.8DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2DT13LN5
Apr 17 13:48:41 sumo kernel: Neh U=MCd:56:68:95:99:07:60:0SC1..3.3 S=0161.9 E=6TS00 RC00 T=1I= FPOOUPST13DT13LN5 1.9 E=6TS00 RC00 T=0I= FPOT=D P=2 P=2 E=6
Apr 17 13:50:16 sumo sendmail[4971]: r3H9oGxi004971: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170950.r3H9oGxi004971@sumo.ru>, relay=admin@localhost
Apr 17 13:50:16 sumo sendmail[4971]: r3H9oGxi004971: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:52:58 sumo kernel: 561:595:9807b:80S=..3.3 S=0161.9 E=6TS00 RC00 T=1I= FPOOUPST13DT13LN5 :56:68:95:994:ab:80 R=00151 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 <7>INPUT packets: IN=eth0 OUT= MAC=d4:85:64:16:85:39:54:89:98:40:7a:b6:08:00 SRC=10.0.147.68 DST=10.11615.194LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:53:21 sumo kernel: 48:84:ab:80 R=1..4. S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 =t0OT A=48:41:53:48:84:ab:80 R=001813DT1.1.514 LN7 O=x0PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:55:16 sumo sendmail[344]: r3H9tGtm000344: from=admin, size=121, class=0, nrcpts=1, msgid=<201304170955.r3H9tGtm000344@sumo.ru>, relay=admin@localhost
Apr 17 13:55:16 sumo sendmail[344]: r3H9tGtm000344: to=admin, ctladdr=admin (500/100), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30121, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
Apr 17 13:55:53 sumo kernel[2804]: Error processing log message: <7INPUT akt:I=t0OT A=48:41:53:48:84:ab:80 R=00177DT1.1.514LN7 O=x8PE=x0TT=0I= FPOOUPST13DT13LN5 <7>INPT paces Neh U=MCd:56:68:95:99:07:60:0SC1..4.8DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:56:06 sumo kernel:
Apr 17 13:57:02 sumo kernel: 84:a6080 R=00176 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 <7>INPUT packets: IN=eth0 OUT= MAC=d4:85:64:16:85:39:54:89:98:40:7a:b6:08:0 SRC=1..4.6DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:57:54 sumo kernel: 6848:84:ab0:0SC1..4.8DT1.1.514LN7 O=x8PE=x0TL6 D0D RT=D P=2 P=2 E=6
Apr 17 13:59:51 sumo kernel: 48:84:ab:80 R=00171 S=0161.9 E=6TS00 RC00 T=0I= FPOOUPST13DT13LN5 ces Neh U=MCd:56:68:95:99:07:60:0SC1..3.3 S=0161.9 E=6TO=x0PE=x0TL6 D0D RT=D P=2 P=2 E=6

19.04.2013 11:31 #315957

"avaddon66⇓" написал:
Apr 17 12:58:55 sumo kernel: ata1.00: ACPI _SDD failed (AE 0x5)

Смущает вот это, но могу здесь и ошибаться. возможно надо погуглить на данную темпу. Может это и не критично. А так, пока что нет ни чего подозрительного.

19.04.2013 13:58 · отредактировано #315978

После очередной перезагрузки, при выключении на экране появились цикличные ошибки
http://s019.radikal.ru/i635/1304/c2/75d09991e5de.jpg
http://s019.radikal.ru/i636/1304/60/134a040cc2ee.jpg
http://s58.radikal.ru/i160/1304/b8/a9f610040e81.jpg

19.04.2013 14:53 #315986

ошибка вида: drdy err. говорит об испорченном диске(bad blocks). Или под замену или лечить.

19.04.2013 16:30 #316010

i2ks,
ata1.00: ACPI _SDD failed (AE 0x5)
не критично, контроллер пробует режимы от высоких SATA 3Gb/s, 1.5Gb/s, которые не поддерживаются оборудованием (отсюда и ошибка), в итоге устанавливает первый доступный -- UDMA/100.

А вот sda1 помирает, судя по скриншотам, причём отвалился из массива уже давно, вот фрагмент лога про сборку массива:

text


Apr 17 12:58:55 sumo kernel: md: Autodetecting RAID arrays.
Apr 17 12:58:55 sumo kernel: md: Scanned 4 and added 4 devices.
Apr 17 12:58:55 sumo kernel: md: autorun ...
Apr 17 12:58:55 sumo kernel: md: considering sdb2 ...
Apr 17 12:58:55 sumo kernel: md:  adding sdb2 ...
Apr 17 12:58:55 sumo kernel: md: sdb1 has different UUID to sdb2
Apr 17 12:58:55 sumo kernel: md:  adding sda2 ...
Apr 17 12:58:55 sumo kernel: md: sda1 has different UUID to sdb2
Apr 17 12:58:55 sumo kernel: md: created md1
Apr 17 12:58:55 sumo kernel: md: bind<sda2>
Apr 17 12:58:55 sumo kernel: md: bind<sdb2>
Apr 17 12:58:55 sumo kernel: md: running: <sdb2><sda2>
Apr 17 12:58:55 sumo kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Apr 17 12:58:55 sumo kernel: md: considering sdb1 ...
Apr 17 12:58:55 sumo kernel: md:  adding sdb1 ...
Apr 17 12:58:55 sumo kernel: md:  adding sda1 ...
Apr 17 12:58:55 sumo kernel: md: created md0
Apr 17 12:58:55 sumo kernel: md: bind<sda1>
Apr 17 12:58:55 sumo kernel: md: bind<sdb1>
Apr 17 12:58:55 sumo kernel: md: running: <sdb1><sda1>
Apr 17 12:58:55 sumo kernel: md: kicking non-fresh sda1 from array!
Apr 17 12:58:55 sumo kernel: md: unbind<sda1>
Apr 17 12:58:55 sumo kernel: md: export_rdev(sda1)
Apr 17 12:58:55 sumo kernel: raid1: raid set md0 active with 1 out of 2 mirrors
Apr 17 12:58:55 sumo kernel: md: ... autorun DONE.

И если старт md1 проходит успешно:

text


Apr 17 12:58:55 sumo kernel: md: running: <sdb2><sda2>
Apr 17 12:58:55 sumo kernel: raid1: raid set md1 active with 2 out of 2 mirrors

то с md0 проблемы из-за раздела sda1:

text


Apr 17 12:58:55 sumo kernel: md: kicking non-fresh sda1 from array!
...
Apr 17 12:58:55 sumo kernel: raid1: raid set md0 active with 1 out of 2 mirrors

активно только одно из зеркал. А причина -- несвежий том (полагаю, из-за аппаратных ошибок).

Войдите или зарегистрируйтесь, чтобы ответить.