Возможность переноса RH3

  Booting `Red Hat Enterprise Linux WS (2.4.21-37.ELsmp)`
root (hd0,0)
  Filesystem type is ext2fs, partition type 0x83
kernel /vmlinyz-2.4.21-37.ELsmp ro root=LABEL=/ hdc=ide-scsi hdd=ide-scsi noexec=off
    [Linux-bzimage, setup=0x1400, size=0x14b9bf]
initrd /initrd-2.4.21-37.ELsmp.img 
    [Linux-initrd @ 0x37fa9000, 0x46c14 bytes]
Uncompressing Linux... Ok, booting the kernel.
ACPI: Unsupported table HPET
__va_range(0xdefb8f8f, 0x24): idx=33 mapped at fffdd000
__va_range(0xdefb8f8f, 0x1b8): idx=33 mapped at fffdd000
ACPI table found: DMAR v1 [HPQOEM TYLSBURG 0.1]
ACPI: Unsupported table DMAR
__va_range(0xdefc53b0, 0x24): idx=33 mapped at fffdd000
__va_range(0xdefc53b0, 0x123c): idx=33 mapped at fffdd000
ACPI table found: SSDT v1 [INTEL PPM RCM  32768.1]
Enabling the CPU`s according to the ACPI table
Intel MultiProcessor Specificattion v1.4
      Virtual Wire compatibility mode.
OEM ID: COMPAQ   Product ID: Workstation  APIC at: 0xFEE00000
I/O APIC #1 Version 17 at 0xFEC00000
I/O APIC #2 Version 17 at 0xFEC10000
I/O APIC #3 Version 17 at 0xFEC20000
Processors: 4
xAPIC support is present
Enabling APIC mode: Flat.oUsing 3 I/O APICs
Kernel command line: ro root=LABEL=/ hdc=ide-scsi hdd=ide-scsi noexec=off
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 2660.054 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5308.41 BogoMIPS
Page-cache hash table entries: 2097152 (order: 11, 8192 KB)
Page-pin hash table entries: 524288 (order: 9, 2048 KB)
Dentry cache hash table entries: 1048576 (order: 11, 8192 KB)
Inode cache hash table entries: 524288 (order: 10, 4096 KB)
Buffer cache hash table entries: 524288 (order: 9, 2048 KB)
Memory: 4074108k/4718592k available (1718k kernel code, 98796k reserved, 1300k data, 232k init, 3260052k highmem)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking `hlt` instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check reporting enabled on CPU#0.
CPU0: Intel(R) Xeon(R) CPU            X5550 @ 2.67GHz stepping 05
per-CPU timeslice cutoff: 0.00 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/2 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5308.41 BogoMIPS
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU            X5550 @ 2.67GHz stepping 05
Booting processor 2/4 eip 2000
Initializing CPU#2
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5308.41 BogoMIPS
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU            X5550 @ 2.67GHz stepping 05
Booting processor 3/6 eip 2000
Initializing CPU#3
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5308.41 BogoMIPS
unknown bus type 55.
 ,  3-7<3>unknown bus type 65.
unknown bus type 55.
 ,  3-9<3>unknown bus type 66.
unknown bus type 55.
unknown bus type 66.
unknown bus type 55.
unknown bus type 66.
unknown bus type 55.
unknown bus type 96.
unknown bus type 55.
unknown bus type 96.
unknown bus type 55.
unknown bus type 96.
unknown bus type 55.
unknown bus type 64.
unknown bus type 55.
unknown bus type 65.
unknown bus type 55.
unknown bus type 65.
unknown bus type 55.
 ,  3-19, 3-20, 3-21, 3-22, 3-23, not connected.
 ..TIMER: vector=0x31 pin1=-1 pin2=-1
 ...trying to set up timer (IRQ0) through the 8259A ...  failed.
 ...trying to set up timer as Virtual Wire IRQ... works.
testing the IO APIC..................................
........................................................ done
Using local APIC timer interrupts.
calibrating APIC timer.
PCI->APIC IRQ transform: (B0, I26, P2)-> 22
PCI->APIC IRQ transform: (B0, I27, P0)-> 21
PCI->APIC IRQ transform: (B0, I28, P0)-> 20
PCI->APIC IRQ transform: (B0, I28, P1)-> 21
PCI->APIC IRQ transform: (B0, I29, P0)-> 20
PCI->APIC IRQ transform: (B0, I29, P1)-> 21
PCI->APIC IRQ transform: (B0, I29, P2)-> 22
PCI->APIC IRQ transform: (B0, I29, P0)-> 20
PCI->APIC IRQ transform: (B0, I31, P1)-> 18
PCI->APIC IRQ transform: (B15, I0, P0)-> 24
PCI->APIC IRQ transform: (B2, I0, P0)-> 16
PCI->APIC IRQ transform: (B1, I0, P0)-> 17
PCI  BIOS passed nonexistent PCI bus 55!
PCI  BIOS passed nonexistent PCI bus 65!
PCI:  BIOS reporting unknown device 40:18
PCI:  BIOS reporting unknown device 40:38
PCI:  BIOS reporting unknown device 40:80
PCI:  BIOS reporting unknown device 40:81
PCI:  BIOS reporting unknown device 40:88
PCI:  BIOS reporting unknown device 40:89
PCI:  BIOS reporting unknown device 40:a0
PCI:  BIOS reporting unknown device 40:a1
PCI:  BIOS reporting unknown device 40:a2
PCI:  BIOS reporting unknown device 40:a8
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society Net3.039
Initializing RT netlink socket
apm: BIOS not found.
Total HugeTLB memory allocated, 0
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 294912
aio_setup: sizeof (struct page) = 60
Hugetlbfs mounted.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes: override with idebus=xx
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of65536 buckets, 512Kbytes
TCP: Hashtables configured (established 524288 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 283k freed
VFS: Mounted root (ext2 filesystem).
Red Hat nash version 3.513.6 starting
Mounted /proc filesystem
Loading scsi_mod.o module
SCSI subsystem driver Revision: 1.00
Loading sd_mod.o module
Loading diskdumplib.o module
Loading mptbase.o module
Fusion MPT base driver 2.06.16.01
Copyright (c) 1999-2005 LSI Logic
mptbase: Initiating ioc0 bringup
ioc0: SAS1068E: Capabilities={Initiator}
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: 1 MPT adapter found, 1 installed.
Loading mptscsih.o module
Fusion MPT SCSI Host driver 2.06.16.01
scsi0 : ioc0: LSISAS1068E, FwRev=01190300h, Ports=1, MaxQ=203, IRQ=3
blk: queue f7464e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi : aborting command due to time out : pid 0, scsi0, channel 0, id 0, lun 0 In quiry 00 00 00 ff 00
mptscsih: ioc0: id0 OldAbort: unknown target (sc=f7464c00)
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
mptscsih: ioc0: id0 OldReset: scheduling BUS_RESET SCSI IO (sc=f7464c00)
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
mptscsih: ioc0: id0 OldReset: scheduling BUS_RESET SCSI IO (sc=f7464c00)
SCSI host 0 reset (pid 0) timed out again - 
probably an unrecoverable SCSI bus or device hang.
mptbase: Initiating ioc0 recovery
SCSI host 0 reset (pid 1) timed out again - 
probably an unrecoverable SCSI bus or device hang.