Установил сетевую карту d-link DGE-528T в pci слот, опреелилась без проблем, настроил. После перезагрузки ip a и ifconfig ее не отображают. lshw -class network показывает вот что:
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: enp3s0
version: 06
serial: 50:e5:49:ea:96:72
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.039.00-NAPI duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff
*-network UNCLAIMED
description: Ethernet controller
product: DGE-528T Gigabit Ethernet Adapter
vendor: D-Link System Inc
physical id: 0
bus info: pci@0000:05:00.0
version: 10
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: latency=32 maxlatency=64 mingnt=32
resources: ioport:d000(size=256) memory:f7c20000-f7c200ff memory:f7c00000-f7c1ffff
в чем проблема может быть? и как ее решить корректно?