Fedora и D-link DWA-125 USB адаптер

купила USB адаптер, система у меня его не воспринимает ни как. Адаптер даже не светится. Вчера весь вечер гуглила и т.д. Говорят что драйвера не нужны. А что тогда нужно? Вкладка беспроводные сети в Network менеджере не работает.

Покажите вывод последних строк 20 команды dmesg секунд через 15÷20 после подключения адаптера.

[ 7153.322546] usb 1-3: USB disconnect, device number 6
[ 7156.720026] usb 1-4: new high-speed USB device number 7 using ehci_hcd
[ 7156.852940] usb 1-4: New USB device found, idVendor=2001, idProduct=3c19
[ 7156.852945] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7156.852949] usb 1-4: Product: 11n Adapter
[ 7156.852952] usb 1-4: Manufacturer: Ralink
[ 7156.852954] usb 1-4: SerialNumber: 1.0

Сейчас нашла rpm-пакет
This package contains the linux kernel module files for the Ralink rt3070
driver for WiFi, a linux device driver for USB 802.11a/b/g universal NIC cards
that use Ralink rt307x chipsets.
Пока устанавливается, уже минут 7. Не знаю поможет или нет.

Гляньте — D-Link DWA-125 Wireless N 150 (rev.A3)

[ 842.266504] usb 1-4: USB disconnect, device number 5
[ 853.987019] usb 1-3: new high-speed USB device number 6 using ehci_hcd
[ 854.118867] usb 1-3: New USB device found, idVendor=2001, idProduct=3c19
[ 854.118872] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 854.118876] usb 1-3: Product: 11n Adapter
[ 854.118879] usb 1-3: Manufacturer: Ralink
[ 854.118881] usb 1-3: SerialNumber: 1.0
[ 875.386744] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 944.483287] ATL1E 0000:02:00.0: em1: NIC Link is Down
[ 947.089615] ATL1E 0000:02:00.0: em1: NIC Link is Up <100 Mbps Full Duplex>
[ 947.106007] ATL1E 0000:02:00.0: em1: NIC Link is Down
[ 948.908227] ATL1E 0000:02:00.0: em1: NIC Link is Up <100 Mbps Full Duplex>
[ 1174.015391] ATL1E 0000:02:00.0: em1: NIC Link is Down
[ 1177.249417] ATL1E 0000:02:00.0: em1: NIC Link is Up <100 Mbps Full Duplex>
[ 1202.536131] ATL1E 0000:02:00.0: em1: NIC Link is Down
[ 1211.837532] ATL1E 0000:02:00.0: em1: NIC Link is Up <100 Mbps Full Duplex>
[ 2884.162810] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7153.322546] usb 1-3: USB disconnect, device number 6
[ 7156.720026] usb 1-4: new high-speed USB device number 7 using ehci_hcd
[ 7156.852940] usb 1-4: New USB device found, idVendor=2001, idProduct=3c19
[ 7156.852945] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7156.852949] usb 1-4: Product: 11n Adapter
[ 7156.852952] usb 1-4: Manufacturer: Ralink
[ 7156.852954] usb 1-4: SerialNumber: 1.0

Спасибо. Посмотрю

Там проблема вроде бы решилась, но я компилировать не умею...

Покажите от root'а

ifconfig -a

iwconfig

[root@localhost ~]# ifconfig -a
em1 Link encap:Ethernet HWaddr E0:CB:4E:A6:9F:BC
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::e2cb:4eff:fea6:9fbc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:33804 errors:0 dropped:0 overruns:0 frame:0
TX packets:20634 errors:0 dropped:0 overruns:0 carrier:2
collisions:0 txqueuelen:1000
RX bytes:44946719 (42.8 MiB) TX bytes:1741639 (1.6 MiB)
Interrupt:44

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1440 (1.4 KiB) TX bytes:1440 (1.4 KiB)

[root@localhost ~]# iwconfig
em1 no wireless extensions.

lo no wireless extensions.

Правильно я делаю или нет? Как компилировать?

[root@localhost linux]# ls
br_ftph.c config.mk Makefile.4 Makefile.6 Makefile.clean rt_linux_symb.c rt_profile.c rt_usb.c usb_main_dev.c
cfg80211.c inf_ppa.c Makefile.4.netif Makefile.6.netif Makefile.libautoprovision.6 rt_main_dev.c rt_rbus_pci_drv.c rt_usb_util.c vr_bdlt.c
cfg80211drv.c Makefile Makefile.4.util Makefile.6.util rt_linux.c rt_proc.c rt_symb.c sta_ioctl.c vr_ikans.c
[root@localhost linux]# make
Makefile:1: /os/linux/config.mk: Нет такого файла или каталога
make: *** Нет правила для сборки цели `/os/linux/config.mk'. Останов.
[root@localhost linux]#

Не надо ничего компилировать, по крайней мере пока ;)
Гляньте ещё — http://forums.fedoraforum.org/showpost.php?s=47a59cd05149f08b8668ce24c382118d&p=1463000&postcount=3

Не помогло

Поменялась с папой адаптером, у него такой же точно, мой не работает, а его заработал

"Natalis" написал:

а его заработал

Что-нибудь дополнительное устанавливали?
Если есть возможность и желание ;), покажите вывод dmesg и для «нового» адаптера.

[ 7542.297572] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 1)
[ 7542.497022] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 2)
[ 7542.697022] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 3)
[ 7542.897022] wlan0: authentication with f4:6d:04:c3:7b:ac timed out
[ 7543.998322] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 1)
[ 7544.198022] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 2)
[ 7544.398027] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 3)
[ 7544.598023] wlan0: authentication with f4:6d:04:c3:7b:ac timed out
[ 7550.616325] wlan0: direct probe to f4:6d:04:c3:7b:ac (try 1/3)
[ 7550.619707] wlan0: direct probe responded
[ 7550.619747] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 1)
[ 7550.819019] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 2)
[ 7551.019018] wlan0: authenticate with f4:6d:04:c3:7b:ac (try 3)
[ 7551.219018] wlan0: authentication with f4:6d:04:c3:7b:ac timed out
[ 7892.824588] wlan0: Trigger new scan to find an IBSS to join
[ 7895.986860] wlan0: Trigger new scan to find an IBSS to join
[ 7899.058861] wlan0: Trigger new scan to find an IBSS to join
[ 7900.114353] wlan0: Creating new IBSS network, BSSID c6:37:a7:ed:f9:58
[ 7921.550079] ATL1E 0000:02:00.0: em1: NIC Link is Down
[ 7930.188380] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7930.419444] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7961.317886] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7977.397071] ATL1E 0000:02:00.0: em1: NIC Link is Up <100 Mbps Full Duplex>
[ 7992.447381] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8023.576897] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8054.706429] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8085.835934] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8097.537559] ATL1E 0000:02:00.0: em1: NIC Link is Down
[ 8107.699376] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8116.965576] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8164.239105] ATL1E 0000:02:00.0: em1: NIC Link is Up <100 Mbps Full Duplex>
[ 8171.272872] SELinux: initialized (dev proc, type proc), uses genfs_contexts

Но я теперь не знаю как настроить подключение, куда вводить код и пароль и т.д.

"Natalis" написал:

Но я теперь не знаю как настроить подключение, куда вводить код и пароль и т.д.

Предложенная мной ссылка не срабатывает?

When system started the lightbulb on device was not blinking.
At first moment I decided that driver is not work.....
But on the device is a button. I just pressed it and lightbulb became blinking - I was happy, it's alive!

Ok, then I opened "Network configuration" utility.
There wireless device appeared: D-Link System DWA-125
Then...in system menu choose:

System->Preferences->Network Connections->Wireless->Add

On Wireless tab I specified following fields:

SSID
Mode = infrastructure

On tab "Wireless Security" ->

Security: I used WEP 40/128 key
Key = your security key

After that just saved connection and Network Manager Applet apeared showing awailable networks. I've choosen my network and made connection.

Кнопка ok не активна, делаю вроде бы все правильно