Здравствуйте! Недавно столкнулся с тем, что при копировании файлов с виндовой(XP...) машины по сети на линукс (CentOS) - а точнее файлы образов акрониса, они повреждаются (контрольная сумма не совпадает). Установлен Centos 5.6_x86 (рейд1 из 2х SATA500 гб самсунгов-одиноаковых). Винты заведомо целые, проверял. Шлейфы тоже в норме, т.к в Пк стоят вообщето 4 винта, т.е md3 и md4 - оба зеркала из 2х винтов каждый. Файлы бьются на обоих рейдах..(. Что может быть проблемой, какие данные необходимо еще указать? Пробовал переписать с 1го массива на другой - итог тот же- контр. сумма не совпадает((
Дополнение: Проверил винты на повреждения - их нет, тестил локально копирование, мелкие файлы при копировании не бьются, с увеличением размера вероятность повышается, как то раз скопировал 350 мб и не побился, затем повторил с аналогичным размером - увы.. опять 25.. Очень прошу откликнуться, надеюсь на ваше понимание.
LinuxForum.Fans
Бьются файлы в CentOS 5.6_X86 при RAID1
Автор: Dee
18 сообщений
3298 просмотров
Рейд софтовый?
В mdadm всё нормально с винтами?
Чем контрольную сумму проверяешь?
Vascom, да софтовый, контрльную проверяю командой md5sum. В mdadm все ок, актив синк итд..
Процессор и память разогнаны?
Проверь память мемтестом.
Dee, по сети? cifs, scp, ftp? если файл поместить в архив, такая же ситуация?
Vascom, нет, разгона нет, память проверить смогу только завтра.
i2ks, бьются любые файлы, не зависит от расширения, локально тоже самое, пробовал копировать внутри этого же рейда..
По моему выглядит как аппаратная проблема с процессором или памятью.
В dmesg нет ошибок?
Так по какому протоколу копируются файлы?
Vascom, я особо не разбираюсь в логах, как тут вложить файли, возможно это сделать? В том то и дело, заодно хотелось бы понять как распозновать ошибки в dmesg..
beza2000, даже не знаю как ответить, копировать пробовал через mc, консоль, когда по сети поднята самба..
Ну ошибки распознаются по слову error (может быть в любом регистре). Логи тут можно прикладывать или выкладывать их в тег code например.
Dee, тогда необходимо смотреть на вывод команды iostat и sar, возможно есnь ошибки чтения/записи на диски.
Vascom, спасибо
вот dmesg
Показать
text
Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 15:51:15 EST 2011
Command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fbc10
ACPI: XSDT (v001 A_M_I_ OEMXSDT 0x12000816 MSFT 0x00000097) @ 0x000000007ff80100
ACPI: FADT (v003 A_M_I_ OEMFACP 0x12000816 MSFT 0x00000097) @ 0x000000007ff80290
ACPI: MADT (v001 A_M_I_ OEMAPIC 0x12000816 MSFT 0x00000097) @ 0x000000007ff80390
ACPI: MCFG (v001 A_M_I_ OEMMCFG 0x12000816 MSFT 0x00000097) @ 0x000000007ff80400
ACPI: OEMB (v001 A_M_I_ AMI_OEM 0x12000816 MSFT 0x00000097) @ 0x000000007ff8e040
ACPI: HPET (v001 A_M_I_ OEMHPET 0x12000816 MSFT 0x00000097) @ 0x000000007ff88f80
ACPI: OSFR (v001 A_M_I_ OEMOSFR 0x12000816 MSFT 0x00000097) @ 0x000000007ff88fc0
ACPI: DSDT (v001 A0916 A0916041 0x00000041 INTL 0x20060113) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-000000007ff80000
Bootmem setup node 0 0000000000000000-000000007ff80000
On node 0 totalpages: 515389
DMA zone: 2435 pages, LIFO batch:0
DMA32 zone: 512954 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009d000 - 000000000009e000
Nosave address range: 000000000009e000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
Built 1 zonelists. Total pages: 515389
Kernel command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
ACPI: DMAR not present
Memory: 1924332k/2096640k available (2592k kernel code, 171848k reserved, 1649k data, 224k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.45 BogoMIPS (lpj=2672727)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 16.704 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5345.41 BogoMIPS (lpj=2672705)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06
Brought up 2 CPUs
CPU#0: NMI watchdog performance counter calibration - 120->140
CPU#1: NMI watchdog performance counter calibration - 60->80
NMI watchdog testing PASSED.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2672.727 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=10
checking if image is initramfs... it is
Freeing initrd memory: 2619k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
pnp: 00:06: ioport range 0x290-0x297 has been reserved
pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: fe900000-fe9fffff
PREFETCH window 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window 0x00000000fdf00000-0x00000000fdffffff
PCI: Bridge: 0000:00:1c.4
IO window: e000-efff
MEM window: feb00000-febfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1320763533.436:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key C099FB4D84A418B6
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1c.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 224k freed
Write protecting the kernel read-only data: 519k
input: AT Translated Set 2 keyboard as /class/input/input0
GSI 18 sharing vector 0xE1 and IRQ 18
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 225, io mem 0xfe8ffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
GSI 19 sharing vector 0xE9 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfe8ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 20 sharing vector 0x32 and IRQ 20
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 50, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 225, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
GSI 21 sharing vector 0x3A and IRQ 21
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 58, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000b480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
md: raid1 personality registered for level 1
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
GSI 22 sharing vector 0x42 and IRQ 22
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 22 (level, low) -> IRQ 66
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 66
ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 66
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
sd 1:0:0:0: Attached scsi disk sdb
ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 22 (level, low) -> IRQ 66
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 66
ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 66
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1
sd 2:0:0:0: Attached scsi disk sdc
Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
sdd: sdd1
sd 3:0:0:0: Attached scsi disk sdd
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi4 : pata_marvell
scsi5 : pata_marvell
ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 169
ata6: DUMMY
ata5.00: ATAPI: Optiarc DVD RW AD-5200A, 1.09, max UDMA/66
ata5.00: configured for UDMA/66
Vendor: Optiarc Model: DVD RW AD-5200A Rev: 1.09
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdd1 ...
md: adding sdd1 ...
md: adding sdc1 ...
md: sdb5 has different UUID to sdd1
md: sdb3 has different UUID to sdd1
md: sdb2 has different UUID to sdd1
md: sdb1 has different UUID to sdd1
md: sda5 has different UUID to sdd1
md: sda3 has different UUID to sdd1
md: sda2 has different UUID to sdd1
md: sda1 has different UUID to sdd1
md: created md4
md: bind<sdc1>
md: bind<sdd1>
md: running: <sdd1><sdc1>
raid1: raid set md4 active with 2 out of 2 mirrors
md: considering sdb5 ...
md: adding sdb5 ...
md: sdb3 has different UUID to sdb5
md: sdb2 has different UUID to sdb5
md: sdb1 has different UUID to sdb5
md: adding sda5 ...
md: sda3 has different UUID to sdb5
md: sda2 has different UUID to sdb5
md: sda1 has different UUID to sdb5
md: created md3
md: bind<sda5>
md: bind<sdb5>
md: running: <sdb5><sda5>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb2 has different UUID to sdb3
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda2 has different UUID to sdb3
md: sda1 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb2 ...
md: adding sdb2 ...
md: sdb1 has different UUID to sdb2
md: adding sda2 ...
md: sda1 has different UUID to sdb2
md: created md2
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md2 active with 2 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1320763558.763:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input2
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:0:0: Attached scsi generic sg4 type 5
sky2 driver version 1.22
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.22 addr 0xfeafc000 irq 177 Yukon-2 EC Ultra rev 3
sky2 eth0: addr 00:1f:c6:1e:c8:d3
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: ALC883: BIOS auto-probing.
ACPI: PCI Interrupt 0000:01:00.1[b] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:01:00.1 to 64
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
device-mapper: ioctl: error adding target to table
device-mapper: ioctl: device doesn't appear to be in the dev hash table.
EXT3 FS on md2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on md4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020024k swap on /dev/md1. Priority:-1 extents:1 across:1020024k
А тут messages - не полный (ограничение на размер, ниже продолжение лога)
Показать
text
Nov 8 08:07:59 fileserv2 syslogd 1.4.1: restart.
Nov 8 08:08:00 fileserv2 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 8 08:08:00 fileserv2 kernel: Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 15:51:15 EST 2011
Nov 8 08:08:00 fileserv2 kernel: Command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov 8 08:08:00 fileserv2 kernel: BIOS-provided physical RAM map:
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 8 08:08:00 fileserv2 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Nov 8 08:08:00 fileserv2 kernel: DMI 2.4 present.
Nov 8 08:08:00 fileserv2 cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov 8 08:08:00 fileserv2 kernel: No NUMA configuration found
Nov 8 08:08:00 fileserv2 kernel: Faking a node at 0000000000000000-000000007ff80000
Nov 8 08:08:00 fileserv2 kernel: Bootmem setup node 0 0000000000000000-000000007ff80000
Nov 8 08:08:00 fileserv2 kernel: ACPI: PM-Timer IO Port: 0x808
Nov 8 08:08:00 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 8 08:08:00 fileserv2 kernel: Processor #0 7:7 APIC version 20
Nov 8 08:08:00 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 8 08:08:00 fileserv2 kernel: Processor #1 7:7 APIC version 20
Nov 8 08:08:00 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov 8 08:08:00 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov 8 08:08:00 fileserv2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 8 08:08:00 fileserv2 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov 8 08:08:00 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 8 08:08:00 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 8 08:08:00 fileserv2 kernel: Setting APIC routing to physical flat
Nov 8 08:08:00 fileserv2 kernel: ACPI: HPET id: 0x8086a301 base: 0xfed00000
Nov 8 08:08:00 fileserv2 kernel: Using ACPI (MADT) for SMP configuration information
Nov 8 08:08:00 fileserv2 kernel: Nosave address range: 000000000009d000 - 000000000009e000
Nov 8 08:08:00 fileserv2 kernel: Nosave address range: 000000000009e000 - 00000000000a0000
Nov 8 08:08:00 fileserv2 kernel: Nosave address range: 00000000000a0000 - 00000000000e4000
Nov 8 08:08:00 fileserv2 kernel: Nosave address range: 00000000000e4000 - 0000000000100000
Nov 8 08:08:00 fileserv2 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Nov 8 08:08:00 fileserv2 kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov 8 08:08:00 fileserv2 kernel: Built 1 zonelists. Total pages: 515389
Nov 8 08:08:00 fileserv2 kernel: Kernel command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov 8 08:08:00 fileserv2 kernel: Initializing CPU#0
Nov 8 08:08:00 fileserv2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov 8 08:08:00 fileserv2 kernel: Console: colour VGA+ 80x25
Nov 8 08:08:00 fileserv2 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 8 08:08:00 fileserv2 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 8 08:08:00 fileserv2 kernel: Checking aperture...
Nov 8 08:08:00 fileserv2 kernel: ACPI: DMAR not present
Nov 8 08:08:00 fileserv2 kernel: Memory: 1924332k/2096640k available (2592k kernel code, 171848k reserved, 1649k data, 224k init)
Nov 8 08:08:00 fileserv2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.45 BogoMIPS (lpj=2672728)
Nov 8 08:08:00 fileserv2 kernel: Security Framework v1.0.0 initialized
Nov 8 08:08:00 fileserv2 rpc.statd[2847]: Version 1.0.9 Starting
Nov 8 08:08:00 fileserv2 kernel: SELinux: Initializing.
Nov 8 08:08:00 fileserv2 kernel: selinux_register_security: Registering secondary module capability
Nov 8 08:08:00 fileserv2 kernel: Capability LSM initialized as secondary
Nov 8 08:08:00 fileserv2 kernel: Mount-cache hash table entries: 256
Nov 8 08:08:00 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 8 08:08:00 fileserv2 kernel: CPU: L2 cache: 3072K
Nov 8 08:08:00 fileserv2 kernel: using mwait in idle threads.
Nov 8 08:08:00 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov 8 08:08:00 fileserv2 kernel: CPU: Processor Core ID: 0
Nov 8 08:08:00 fileserv2 kernel: CPU0: Thermal monitoring enabled (TM2)
Nov 8 08:08:00 fileserv2 kernel: SMP alternatives: switching to UP code
Nov 8 08:08:00 fileserv2 kernel: ACPI: Core revision 20060707
Nov 8 08:08:00 fileserv2 kernel: Using local APIC timer interrupts.
Nov 8 08:08:00 fileserv2 kernel: Detected 16.704 MHz APIC timer.
Nov 8 08:08:00 fileserv2 kernel: SMP alternatives: switching to SMP code
Nov 8 08:08:00 fileserv2 kernel: Booting processor 1/2 APIC 0x1
Nov 8 08:08:00 fileserv2 rpc.statd[2847]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user
Nov 8 08:08:00 fileserv2 kernel: Initializing CPU#1
Nov 8 08:08:01 fileserv2 kernel: Calibrating delay using timer specific routine.. 5345.41 BogoMIPS (lpj=2672705)
Nov 8 08:08:01 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 8 08:08:01 fileserv2 kernel: CPU: L2 cache: 3072K
Nov 8 08:08:01 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov 8 08:08:01 fileserv2 kernel: CPU: Processor Core ID: 1
Nov 8 08:08:01 fileserv2 kernel: CPU1: Thermal monitoring enabled (TM2)
Nov 8 08:08:01 fileserv2 kernel: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06
Nov 8 08:08:01 fileserv2 kernel: Brought up 2 CPUs
Nov 8 08:08:01 fileserv2 kernel: NMI watchdog testing PASSED.
Nov 8 08:08:01 fileserv2 kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Nov 8 08:08:01 fileserv2 kernel: time.c: Detected 2672.728 MHz processor.
Nov 8 08:08:01 fileserv2 kernel: migration_cost=13
Nov 8 08:08:01 fileserv2 kernel: checking if image is initramfs... it is
Nov 8 08:08:01 fileserv2 kernel: Freeing initrd memory: 2619k freed
Nov 8 08:08:01 fileserv2 kernel: NET: Registered protocol family 16
Nov 8 08:08:01 fileserv2 kernel: ACPI: bus type pci registered
Nov 8 08:08:01 fileserv2 kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Nov 8 08:08:01 fileserv2 kernel: PCI: Not using MMCONFIG.
Nov 8 08:08:01 fileserv2 kernel: PCI: Using configuration type 1
Nov 8 08:08:01 fileserv2 kernel: ACPI: Interpreter enabled
Nov 8 08:08:01 fileserv2 kernel: ACPI: Using IOAPIC for interrupt routing
Nov 8 08:08:01 fileserv2 kernel: ACPI: No dock devices found.
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 8 08:08:01 fileserv2 kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Nov 8 08:08:01 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Nov 8 08:08:01 fileserv2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 8 08:08:01 fileserv2 kernel: pnp: PnP ACPI init
Nov 8 08:08:01 fileserv2 kernel: pnp: PnP ACPI: found 15 devices
Nov 8 08:08:01 fileserv2 kernel: usbcore: registered new driver usbfs
Nov 8 08:08:01 fileserv2 kernel: usbcore: registered new driver hub
Nov 8 08:08:01 fileserv2 kernel: PCI: Using ACPI for IRQ routing
Nov 8 08:08:01 fileserv2 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Nov 8 08:08:01 fileserv2 kernel: NetLabel: Initializing
Nov 8 08:08:01 fileserv2 kernel: NetLabel: domain hash size = 128
Nov 8 08:08:01 fileserv2 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 8 08:08:01 fileserv2 kernel: NetLabel: unlabeled traffic allowed by default
Nov 8 08:08:01 fileserv2 kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
Nov 8 08:08:01 fileserv2 kernel: hpet0: 4 64-bit timers, 14318180 Hz
Nov 8 08:08:01 fileserv2 kernel: ACPI: DMAR not present
Nov 8 08:08:01 fileserv2 kernel: PCI-GART: No AMD northbridge found.
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:06: ioport range 0x290-0x297 has been reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
Nov 8 08:08:01 fileserv2 kernel: pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
Nov 8 08:08:01 fileserv2 kernel: PCI: Bridge: 0000:00:01.0
Nov 8 08:08:01 fileserv2 kernel: IO window: c000-cfff
Nov 8 08:08:01 fileserv2 kernel: MEM window: fe900000-fe9fffff
Nov 8 08:08:01 fileserv2 kdump: kexec: loaded kdump kernel
Nov 8 08:08:01 fileserv2 kernel: PREFETCH window 0x00000000d0000000-0x00000000dfffffff
Nov 8 08:08:01 fileserv2 kdump: started up
Nov 8 08:08:01 fileserv2 kernel: PCI: Bridge: 0000:00:1c.0
Nov 8 08:08:01 fileserv2 kernel: IO window: disabled.
Nov 8 08:08:01 fileserv2 kernel: MEM window: disabled.
Nov 8 08:08:01 fileserv2 kernel: PREFETCH window 0x00000000fdf00000-0x00000000fdffffff
Nov 8 08:08:01 fileserv2 kernel: PCI: Bridge: 0000:00:1c.4
Nov 8 08:08:01 fileserv2 kernel: IO window: e000-efff
Nov 8 08:08:01 fileserv2 kernel: MEM window: feb00000-febfffff
Nov 8 08:08:01 fileserv2 kernel: PREFETCH window: disabled.
Nov 8 08:08:01 fileserv2 kernel: PCI: Bridge: 0000:00:1c.5
Nov 8 08:08:02 fileserv2 kernel: IO window: d000-dfff
Nov 8 08:08:02 fileserv2 kernel: MEM window: fea00000-feafffff
Nov 8 08:08:02 fileserv2 kernel: PREFETCH window: disabled.
Nov 8 08:08:02 fileserv2 kernel: PCI: Bridge: 0000:00:1e.0
Nov 8 08:08:02 fileserv2 kernel: IO window: disabled.
Nov 8 08:08:02 fileserv2 kernel: MEM window: disabled.
Nov 8 08:08:02 fileserv2 kernel: PREFETCH window: disabled.
Nov 8 08:08:02 fileserv2 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Nov 8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 8 08:08:02 fileserv2 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Nov 8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov 8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
Nov 8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 16 (level, low) -> IRQ 169
Nov 8 08:08:02 fileserv2 kernel: NET: Registered protocol family 2
Nov 8 08:08:02 fileserv2 hcid[3006]: Bluetooth HCI daemon
Nov 8 08:08:02 fileserv2 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 8 08:08:02 fileserv2 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Nov 8 08:08:02 fileserv2 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 8 08:08:02 fileserv2 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Nov 8 08:08:02 fileserv2 sdpd[3010]: Bluetooth SDP daemon
Nov 8 08:08:02 fileserv2 kernel: TCP reno registered
Nov 8 08:08:02 fileserv2 kernel: audit: initializing netlink socket (disabled)
Nov 8 08:08:02 fileserv2 kernel: type=2000 audit(1320739636.512:1): initialized
Nov 8 08:08:02 fileserv2 kernel: Total HugeTLB memory allocated, 0
Nov 8 08:08:02 fileserv2 kernel: VFS: Disk quotas dquot_6.5.1
Nov 8 08:08:02 fileserv2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 8 08:08:02 fileserv2 hcid[3006]: Register path:/org/bluez fallback:1
Nov 8 08:08:02 fileserv2 kernel: Initializing Cryptographic API
Nov 8 08:08:02 fileserv2 kernel: alg: No test for crc32c (crc32c-generic)
Nov 8 08:08:02 fileserv2 kernel: ksign: Installing public key data
Nov 8 08:08:02 fileserv2 kernel: Loading keyring
Nov 8 08:08:02 fileserv2 kernel: - Added public key C099FB4D84A418B6
Nov 8 08:08:02 fileserv2 kernel: - User ID: CentOS (Kernel Module GPG key)
Nov 8 08:08:02 fileserv2 kernel: io scheduler noop registered
Nov 8 08:08:02 fileserv2 kernel: io scheduler anticipatory registered
Nov 8 08:08:02 fileserv2 pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
Nov 8 08:08:02 fileserv2 kernel: io scheduler deadline registered
Nov 8 08:08:02 fileserv2 kernel: io scheduler cfq registered (default)
Nov 8 08:08:02 fileserv2 pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-egate.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
Nov 8 08:08:02 fileserv2 pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
Nov 8 08:08:02 fileserv2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 8 08:08:02 fileserv2 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]
Nov 8 08:08:02 fileserv2 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]
Nov 8 08:08:02 fileserv2 kernel: Real Time Clock Driver v1.12ac
Nov 8 08:08:02 fileserv2 kernel: Non-volatile memory driver v1.2
Nov 8 08:08:02 fileserv2 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 8 08:08:02 fileserv2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 8 08:08:02 fileserv2 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 8 08:08:02 fileserv2 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 8 08:08:02 fileserv2 kernel: brd: module loaded
Nov 8 08:08:02 fileserv2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 8 08:08:02 fileserv2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 8 08:08:02 fileserv2 kernel: ide-floppy driver 0.99.newide
Nov 8 08:08:02 fileserv2 kernel: usbcore: registered new driver hiddev
Nov 8 08:08:02 fileserv2 kernel: usbcore: registered new driver usbhid
Nov 8 08:08:02 fileserv2 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Nov 8 08:08:02 fileserv2 kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Nov 8 08:08:02 fileserv2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 8 08:08:02 fileserv2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 8 08:08:02 fileserv2 kernel: mice: PS/2 mouse device common for all mice
Nov 8 08:08:02 fileserv2 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 8 08:08:02 fileserv2 kernel: md: bitmap version 4.39
Nov 8 08:08:02 fileserv2 kernel: TCP bic registered
Nov 8 08:08:02 fileserv2 kernel: Initializing IPsec netlink socket
Nov 8 08:08:02 fileserv2 kernel: NET: Registered protocol family 1
Nov 8 08:08:02 fileserv2 kernel: NET: Registered protocol family 17
Nov 8 08:08:02 fileserv2 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 8 08:08:02 fileserv2 kernel: Initalizing network drop monitor service
Nov 8 08:08:02 fileserv2 kernel: Freeing unused kernel memory: 224k freed
Nov 8 08:08:02 fileserv2 kernel: Write protecting the kernel read-only data: 519k
Nov 8 08:08:02 fileserv2 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov 8 08:08:02 fileserv2 kernel: GSI 18 sharing vector 0xE1 and IRQ 18
Nov 8 08:08:02 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: debug port 1
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: irq 225, io mem 0xfe8ffc00
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 8 08:08:03 fileserv2 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 8 08:08:03 fileserv2 kernel: hub 1-0:1.0: USB hub found
Nov 8 08:08:03 fileserv2 kernel: hub 1-0:1.0: 6 ports detected
Nov 8 08:08:03 fileserv2 kernel: GSI 19 sharing vector 0xE9 and IRQ 19
Nov 8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfe8ff800
Nov 8 08:08:03 fileserv2 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 8 08:08:03 fileserv2 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 8 08:08:03 fileserv2 kernel: hub 2-0:1.0: USB hub found
Nov 8 08:08:03 fileserv2 kernel: hub 2-0:1.0: 6 ports detected
Nov 8 08:08:03 fileserv2 kernel: USB Universal Host Controller Interface driver v3.0
Nov 8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000b800
Nov 8 08:08:03 fileserv2 kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 8 08:08:03 fileserv2 kernel: hub 3-0:1.0: USB hub found
Nov 8 08:08:03 fileserv2 kernel: hub 3-0:1.0: 2 ports detected
Nov 8 08:08:03 fileserv2 kernel: GSI 20 sharing vector 0x32 and IRQ 20
Nov 8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 50
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.1: irq 50, io base 0x0000b880
Nov 8 08:08:03 fileserv2 kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 8 08:08:03 fileserv2 kernel: hub 4-0:1.0: USB hub found
Nov 8 08:08:03 fileserv2 kernel: hub 4-0:1.0: 2 ports detected
Nov 8 08:08:03 fileserv2 kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Nov 8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 225
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1a.2: irq 225, io base 0x0000bc00
Nov 8 08:08:03 fileserv2 kernel: usb usb5: configuration #1 chosen from 1 choice
Nov 8 08:08:03 fileserv2 kernel: hub 5-0:1.0: USB hub found
Nov 8 08:08:03 fileserv2 kernel: hub 5-0:1.0: 2 ports detected
Nov 8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000b080
Nov 8 08:08:03 fileserv2 kernel: usb usb6: configuration #1 chosen from 1 choice
Nov 8 08:08:03 fileserv2 kernel: hub 6-0:1.0: USB hub found
Nov 8 08:08:03 fileserv2 kernel: hub 6-0:1.0: 2 ports detected
Nov 8 08:08:03 fileserv2 kernel: GSI 21 sharing vector 0x3A and IRQ 21
Nov 8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 58
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.1: irq 58, io base 0x0000b400
Nov 8 08:08:03 fileserv2 kernel: usb usb7: configuration #1 chosen from 1 choice
Nov 8 08:08:03 fileserv2 kernel: hub 7-0:1.0: USB hub found
Nov 8 08:08:03 fileserv2 kernel: hub 7-0:1.0: 2 ports detected
Nov 8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Nov 8 08:08:03 fileserv2 kernel: uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000b480
Nov 8 08:08:03 fileserv2 kernel: usb usb8: configuration #1 chosen from 1 choice
Nov 8 08:08:03 fileserv2 kernel: hub 8-0:1.0: USB hub found
Nov 8 08:08:03 fileserv2 kernel: hub 8-0:1.0: 2 ports detected
Nov 8 08:08:03 fileserv2 kernel: md: raid1 personality registered for level 1
Nov 8 08:08:03 fileserv2 kernel: SCSI subsystem initialized
Nov 8 08:08:03 fileserv2 kernel: GSI 22 sharing vector 0x42 and IRQ 22
Nov 8 08:08:03 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 22 (level, low) -> IRQ 66
Nov 8 08:08:03 fileserv2 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Nov 8 08:08:03 fileserv2 kernel: scsi0 : ata_piix
Nov 8 08:08:03 fileserv2 kernel: scsi1 : ata_piix
Nov 8 08:08:03 fileserv2 kernel: ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 66
Nov 8 08:08:03 fileserv2 kernel: ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 66
Nov 8 08:08:03 fileserv2 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 8 08:08:03 fileserv2 kernel: ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov 8 08:08:03 fileserv2 kernel: ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 8 08:08:03 fileserv2 kernel: ata1.00: configured for UDMA/133
Nov 8 08:08:03 fileserv2 kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 8 08:08:03 fileserv2 kernel: ata2.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov 8 08:08:03 fileserv2 kernel: ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 8 08:08:03 fileserv2 kernel: ata2.00: configured for UDMA/133
Nov 8 08:08:03 fileserv2 kernel: Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Nov 8 08:08:03 fileserv2 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 8 08:08:03 fileserv2 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 08:08:03 fileserv2 kernel: sda: Write Protect is off
Nov 8 08:08:04 fileserv2 kernel: SCSI device sda: drive cache: write back
Nov 8 08:08:04 fileserv2 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 08:08:04 fileserv2 kernel: sda: Write Protect is off
Nov 8 08:08:04 fileserv2 kernel: SCSI device sda: drive cache: write back
Nov 8 08:08:04 fileserv2 kernel: sda: sda1 sda2 sda3 sda4 < sda5 >
Nov 8 08:08:04 fileserv2 kernel: sd 0:0:0:0: Attached scsi disk sda
Nov 8 08:08:04 fileserv2 kernel: Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Nov 8 08:08:04 fileserv2 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 08:08:04 fileserv2 kernel: sdb: Write Protect is off
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdb: drive cache: write back
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 08:08:04 fileserv2 kernel: sdb: Write Protect is off
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdb: drive cache: write back
Nov 8 08:08:04 fileserv2 kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
Nov 8 08:08:04 fileserv2 kernel: sd 1:0:0:0: Attached scsi disk sdb
Nov 8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 22 (level, low) -> IRQ 66
Nov 8 08:08:04 fileserv2 kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Nov 8 08:08:04 fileserv2 kernel: scsi2 : ata_piix
Nov 8 08:08:04 fileserv2 kernel: scsi3 : ata_piix
Nov 8 08:08:04 fileserv2 kernel: ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 66
Nov 8 08:08:04 fileserv2 kernel: ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 66
Nov 8 08:08:04 fileserv2 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 8 08:08:04 fileserv2 kernel: ata3.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov 8 08:08:04 fileserv2 kernel: ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 8 08:08:04 fileserv2 kernel: ata3.00: configured for UDMA/133
Nov 8 08:08:04 fileserv2 kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 8 08:08:04 fileserv2 kernel: ata4.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov 8 08:08:04 fileserv2 kernel: ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 8 08:08:04 fileserv2 kernel: ata4.00: configured for UDMA/133
Nov 8 08:08:04 fileserv2 kernel: Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Nov 8 08:08:04 fileserv2 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 08:08:04 fileserv2 kernel: sdc: Write Protect is off
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdc: drive cache: write back
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 08:08:04 fileserv2 kernel: sdc: Write Protect is off
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdc: drive cache: write back
Nov 8 08:08:04 fileserv2 kernel: sdc: sdc1
Nov 8 08:08:04 fileserv2 kernel: sd 2:0:0:0: Attached scsi disk sdc
Nov 8 08:08:04 fileserv2 kernel: Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Nov 8 08:08:04 fileserv2 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 08:08:04 fileserv2 kernel: sdd: Write Protect is off
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdd: drive cache: write back
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 08:08:04 fileserv2 kernel: sdd: Write Protect is off
Nov 8 08:08:04 fileserv2 kernel: SCSI device sdd: drive cache: write back
Nov 8 08:08:04 fileserv2 kernel: sdd: sdd1
Nov 8 08:08:04 fileserv2 kernel: sd 3:0:0:0: Attached scsi disk sdd
Nov 8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 8 08:08:04 fileserv2 kernel: scsi4 : pata_marvell
Nov 8 08:08:04 fileserv2 kernel: scsi5 : pata_marvell
Nov 8 08:08:04 fileserv2 kernel: ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 169
Nov 8 08:08:04 fileserv2 kernel: ata6: DUMMY
Nov 8 08:08:04 fileserv2 kernel: ata5.00: ATAPI: Optiarc DVD RW AD-5200A, 1.09, max UDMA/66
Nov 8 08:08:04 fileserv2 kernel: ata5.00: configured for UDMA/66
Nov 8 08:08:04 fileserv2 kernel: Vendor: Optiarc Model: DVD RW AD-5200A Rev: 1.09
Nov 8 08:08:04 fileserv2 kernel: Type: CD-ROM ANSI SCSI revision: 05
Nov 8 08:08:04 fileserv2 kernel: device-mapper: uevent: version 1.0.3
Nov 8 08:08:04 fileserv2 kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
Nov 8 08:08:04 fileserv2 kernel: device-mapper: dm-raid45: initialized v0.2594l
Nov 8 08:08:04 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov 8 08:08:04 fileserv2 kernel: md: autorun ...
Nov 8 08:08:04 fileserv2 kernel: md: considering sdd1 ...
Nov 8 08:08:04 fileserv2 kernel: md: adding sdd1 ...
Nov 8 08:08:04 fileserv2 kernel: md: adding sdc1 ...
Nov 8 08:08:04 fileserv2 kernel: md: sdb5 has different UUID to sdd1
Nov 8 08:08:04 fileserv2 kernel: md: sdb3 has different UUID to sdd1
Nov 8 08:08:04 fileserv2 kernel: md: sdb2 has different UUID to sdd1
Nov 8 08:08:04 fileserv2 kernel: md: sdb1 has different UUID to sdd1
Nov 8 08:08:04 fileserv2 kernel: md: sda5 has different UUID to sdd1
Nov 8 08:08:04 fileserv2 kernel: md: sda3 has different UUID to sdd1
Nov 8 08:08:04 fileserv2 kernel: md: sda2 has different UUID to sdd1
Nov 8 08:08:04 fileserv2 kernel: md: sda1 has different UUID to sdd1
Nov 8 08:08:04 fileserv2 kernel: md: created md4
Nov 8 08:08:04 fileserv2 kernel: md: bind<sdc1>
Nov 8 08:08:04 fileserv2 kernel: md: bind<sdd1>
Nov 8 08:08:04 fileserv2 kernel: md: running: <sdd1><sdc1>
Nov 8 08:08:04 fileserv2 kernel: raid1: raid set md4 active with 2 out of 2 mirrors
Nov 8 08:08:04 fileserv2 kernel: md: considering sdb5 ...
Nov 8 08:08:04 fileserv2 kernel: md: adding sdb5 ...
Nov 8 08:08:04 fileserv2 kernel: md: sdb3 has different UUID to sdb5
Nov 8 08:08:04 fileserv2 kernel: md: sdb2 has different UUID to sdb5
Nov 8 08:08:04 fileserv2 kernel: md: sdb1 has different UUID to sdb5
Nov 8 08:08:04 fileserv2 kernel: md: adding sda5 ...
Nov 8 08:08:04 fileserv2 kernel: md: sda3 has different UUID to sdb5
Nov 8 08:08:04 fileserv2 kernel: md: sda2 has different UUID to sdb5
Nov 8 08:08:04 fileserv2 kernel: md: sda1 has different UUID to sdb5
Nov 8 08:08:04 fileserv2 kernel: md: created md3
Nov 8 08:08:04 fileserv2 kernel: md: bind<sda5>
Nov 8 08:08:04 fileserv2 kernel: md: bind<sdb5>
Nov 8 08:08:04 fileserv2 kernel: md: running: <sdb5><sda5>
Nov 8 08:08:04 fileserv2 kernel: raid1: raid set md3 active with 2 out of 2 mirrors
Nov 8 08:08:04 fileserv2 kernel: md: considering sdb3 ...
Nov 8 08:08:04 fileserv2 kernel: md: adding sdb3 ...
Nov 8 08:08:04 fileserv2 kernel: md: sdb2 has different UUID to sdb3
Nov 8 08:08:04 fileserv2 kernel: md: sdb1 has different UUID to sdb3
Nov 8 08:08:04 fileserv2 hidd[3170]: Bluetooth HID daemon
Nov 8 08:08:04 fileserv2 kernel: md: adding sda3 ...
Nov 8 08:08:04 fileserv2 kernel: md: sda2 has different UUID to sdb3
Nov 8 08:08:04 fileserv2 kernel: md: sda1 has different UUID to sdb3
Nov 8 08:08:04 fileserv2 kernel: md: created md1
Nov 8 08:08:04 fileserv2 kernel: md: bind<sda3>
Nov 8 08:08:04 fileserv2 kernel: md: bind<sdb3>
Nov 8 08:08:04 fileserv2 kernel: md: running: <sdb3><sda3>
Nov 8 08:08:04 fileserv2 kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Nov 8 08:08:04 fileserv2 kernel: md: considering sdb2 ...
Nov 8 08:08:04 fileserv2 kernel: md: adding sdb2 ...
Nov 8 08:08:04 fileserv2 kernel: md: sdb1 has different UUID to sdb2
Nov 8 08:08:04 fileserv2 kernel: md: adding sda2 ...
Nov 8 08:08:04 fileserv2 kernel: md: sda1 has different UUID to sdb2
Nov 8 08:08:04 fileserv2 kernel: md: created md2
Nov 8 08:08:04 fileserv2 kernel: md: bind<sda2>
Nov 8 08:08:04 fileserv2 kernel: md: bind<sdb2>
Nov 8 08:08:04 fileserv2 kernel: md: running: <sdb2><sda2>
Nov 8 08:08:04 fileserv2 kernel: raid1: raid set md2 active with 2 out of 2 mirrors
Nov 8 08:08:04 fileserv2 kernel: md: considering sdb1 ...
Nov 8 08:08:04 fileserv2 kernel: md: adding sdb1 ...
Nov 8 08:08:04 fileserv2 kernel: md: adding sda1 ...
Nov 8 08:08:04 fileserv2 kernel: md: created md0
Nov 8 08:08:04 fileserv2 kernel: md: bind<sda1>
Nov 8 08:08:04 fileserv2 kernel: md: bind<sdb1>
Nov 8 08:08:04 fileserv2 kernel: md: running: <sdb1><sda1>
Nov 8 08:08:04 fileserv2 kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Nov 8 08:08:04 fileserv2 kernel: md: ... autorun DONE.
Nov 8 08:08:04 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov 8 08:08:04 fileserv2 kernel: md: autorun ...
Nov 8 08:08:04 fileserv2 kernel: md: ... autorun DONE.
Nov 8 08:08:04 fileserv2 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 08:08:04 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 08:08:04 fileserv2 kernel: SELinux: Disabled at runtime.
Nov 8 08:08:04 fileserv2 kernel: type=1404 audit(1320739661.840:2): selinux=0 auid=4294967295 ses=4294967295
Nov 8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
Nov 8 08:08:04 fileserv2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 8 08:08:04 fileserv2 kernel: input: PC Speaker as /class/input/input2
Nov 8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 66
Nov 8 08:08:04 fileserv2 kernel: hda_codec: ALC883: BIOS auto-probing.
Nov 8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:01:00.1[b] -> GSI 17 (level, low) -> IRQ 177
Nov 8 08:08:04 fileserv2 kernel: sky2 driver version 1.22
Nov 8 08:08:04 fileserv2 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov 8 08:08:05 fileserv2 kernel: sky2 0000:02:00.0: v1.22 addr 0xfeafc000 irq 177 Yukon-2 EC Ultra rev 3
Nov 8 08:08:05 fileserv2 kernel: sky2 eth0: addr 00:1f:c6:1e:c8:d3
Nov 8 08:08:05 fileserv2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 8 08:08:05 fileserv2 kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Nov 8 08:08:05 fileserv2 kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Nov 8 08:08:05 fileserv2 kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
Nov 8 08:08:05 fileserv2 kernel: scsi 4:0:0:0: Attached scsi generic sg4 type 5
Nov 8 08:08:05 fileserv2 kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Nov 8 08:08:05 fileserv2 kernel: Uniform CD-ROM driver Revision: 3.20
Nov 8 08:08:05 fileserv2 kernel: floppy0: no floppy controllers found
Nov 8 08:08:05 fileserv2 kernel: work still pending
Nov 8 08:08:05 fileserv2 kernel: lp: driver loaded but no devices found
Nov 8 08:08:05 fileserv2 kernel: ACPI: Power Button (FF) [PWRF]
Nov 8 08:08:05 fileserv2 kernel: ACPI: Power Button (CM) [PWRB]
Nov 8 08:08:05 fileserv2 kernel: ACPI: Mapper loaded
Nov 8 08:08:05 fileserv2 kernel: dell-wmi: No known WMI GUID found
Nov 8 08:08:05 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov 8 08:08:05 fileserv2 kernel: md: autorun ...
Nov 8 08:08:05 fileserv2 kernel: md: ... autorun DONE.
Nov 8 08:08:05 fileserv2 kernel: device-mapper: multipath: version 1.0.5 loaded
Nov 8 08:08:05 fileserv2 kernel: device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Nov 8 08:08:05 fileserv2 kernel: device-mapper: ioctl: error adding target to table
Nov 8 08:08:05 fileserv2 kernel: device-mapper: ioctl: device doesn't appear to be in the dev hash table.
i2ks, постараюсь добраться до моего сервака сегодня и опробовать.
Продолжение messages. Лог, опять неполный, если необходимо дополню...
Показать
text
Nov 8 08:08:05 fileserv2 kernel: EXT3 FS on md2, internal journal
Nov 8 08:08:05 fileserv2 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 08:08:05 fileserv2 kernel: EXT3 FS on md4, internal journal
Nov 8 08:08:05 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 08:08:05 fileserv2 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 08:08:05 fileserv2 kernel: EXT3 FS on md3, internal journal
Nov 8 08:08:05 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 08:08:05 fileserv2 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 08:08:05 fileserv2 kernel: EXT3 FS on md0, internal journal
Nov 8 08:08:05 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 08:08:05 fileserv2 kernel: Adding 1020024k swap on /dev/md1. Priority:-1 extents:1 across:1020024k
Nov 8 08:08:05 fileserv2 kernel: IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Nov 8 08:08:05 fileserv2 kernel: microcode: CPU1 updated from revision 0x60c to 0x60f, date = 09292010
Nov 8 08:08:05 fileserv2 kernel: microcode: CPU0 updated from revision 0x60c to 0x60f, date = 09292010
Nov 8 08:08:05 fileserv2 kernel: Loading iSCSI transport class v2.0-871.
Nov 8 08:08:05 fileserv2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Nov 8 08:08:05 fileserv2 kernel: All bugs added by David S. Miller <davem@redhat.com>
Nov 8 08:08:05 fileserv2 kernel: cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
Nov 8 08:08:05 fileserv2 kernel: iscsi: registered transport (cxgb3i)
Nov 8 08:08:05 fileserv2 kernel: NET: Registered protocol family 10
Nov 8 08:08:05 fileserv2 kernel: lo: Disabled Privacy Extensions
Nov 8 08:08:05 fileserv2 kernel: IPv6 over IPv4 tunneling driver
Nov 8 08:08:05 fileserv2 kernel: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Nov 8 08:08:05 fileserv2 kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
Nov 8 08:08:05 fileserv2 kernel: iscsi: registered transport (bnx2i)
Nov 8 08:08:05 fileserv2 kernel: iscsi: registered transport (tcp)
Nov 8 08:08:05 fileserv2 kernel: iscsi: registered transport (iser)
Nov 8 08:08:05 fileserv2 kernel: iscsi: registered transport (be2iscsi)
Nov 8 08:08:05 fileserv2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 8 08:08:05 fileserv2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 8 08:08:05 fileserv2 kernel: Netfilter messages via NETLINK v0.30.
Nov 8 08:08:05 fileserv2 kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
Nov 8 08:08:05 fileserv2 kernel: sky2 eth0: enabling interface
Nov 8 08:08:05 fileserv2 kernel: sky2 eth0: ram buffer 0K
Nov 8 08:08:05 fileserv2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 8 08:08:05 fileserv2 kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Nov 8 08:08:05 fileserv2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: Core ver 2.10
Nov 8 08:08:05 fileserv2 kernel: NET: Registered protocol family 31
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: HCI device and connection manager initialized
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: HCI socket layer initialized
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: L2CAP ver 2.8
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: L2CAP socket layer initialized
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: RFCOMM socket layer initialized
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: RFCOMM TTY layer initialized
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: RFCOMM ver 1.8
Nov 8 08:08:05 fileserv2 kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Nov 8 08:08:06 fileserv2 automount[3213]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Nov 8 08:08:06 fileserv2 hpiod: 1.6.7 accepting connections at 2208...
Nov 8 08:08:07 fileserv2 xinetd[3291]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Nov 8 08:08:07 fileserv2 xinetd[3291]: Started working: 0 available services
Nov 8 08:08:08 fileserv2 gpm[3337]: *** info [startup.c(95)]:
Nov 8 08:08:08 fileserv2 gpm[3337]: Started gpm successfully. Entered daemon mode.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Successfully dropped root privileges.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: avahi-daemon 0.6.16 starting up.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Successfully called chroot().
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Successfully dropped remaining capabilities.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: No service found in /etc/avahi/services.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: New relevant interface eth0.IPv6 for mDNS.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21f:c6ff:fe1e:c8d3.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: New relevant interface eth0.IPv4 for mDNS.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.208.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Network interface enumeration completed.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Registering new address record for fe80::21f:c6ff:fe1e:c8d3 on eth0.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Registering new address record for 192.168.0.208 on eth0.
Nov 8 08:08:09 fileserv2 avahi-daemon[3464]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov 8 08:08:09 fileserv2 smartd[3494]: smartd version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Nov 8 08:08:09 fileserv2 smartd[3494]: Home page is http://smartmontools.sourceforge.net/
Nov 8 08:08:09 fileserv2 smartd[3494]: Opened configuration file /etc/smartd.conf
Nov 8 08:08:09 fileserv2 smartd[3494]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Nov 8 08:08:09 fileserv2 smartd[3494]: Problem creating device name scan list
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sda, opened
Nov 8 08:08:09 fileserv2 smartd[3494]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sda, opened
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sda, found in smartd database.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sda, is SMART capable. Adding to "monitor" list.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdb, opened
Nov 8 08:08:09 fileserv2 smartd[3494]: Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdb, opened
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdb, found in smartd database.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdc, opened
Nov 8 08:08:09 fileserv2 smartd[3494]: Device /dev/sdc: using '-d sat' for ATA disk behind SAT layer.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdc, opened
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdc, found in smartd database.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdd, opened
Nov 8 08:08:09 fileserv2 smartd[3494]: Device /dev/sdd: using '-d sat' for ATA disk behind SAT layer.
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdd, opened
Nov 8 08:08:09 fileserv2 smartd[3494]: Device: /dev/sdd, found in smartd database.
Nov 8 08:08:10 fileserv2 smartd[3494]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list.
Nov 8 08:08:10 fileserv2 smartd[3494]: Monitoring 0 ATA and 4 SCSI devices
Nov 8 08:08:10 fileserv2 avahi-daemon[3464]: Server startup complete. Host name is fileserv2.local. Local service cookie is 1606065196.
Nov 8 08:08:10 fileserv2 smartd[3496]: smartd has fork()ed into background mode. New PID=3496.
Nov 8 08:15:27 fileserv2 smbd[3599]: [2011/11/08 08:15:27, 0] lib/util_sock.c:get_peer_addr(1224)
Nov 8 08:15:27 fileserv2 smbd[3599]: getpeername failed. Error was Конечная точка передачи не подсоединена
Nov 8 08:15:27 fileserv2 smbd[3599]: [2011/11/08 08:15:27, 0] lib/util_sock.c:write_data(562)
Nov 8 08:15:27 fileserv2 smbd[3599]: write_data: write failure in writing to client 192.168.0.68. Error Соединение сброшено другой стороной
Nov 8 08:15:27 fileserv2 smbd[3599]: [2011/11/08 08:15:27, 0] lib/util_sock.c:send_smb(761)
Nov 8 08:15:27 fileserv2 smbd[3599]: Error writing 4 bytes to client. -1. (Соединение сброшено другой стороной)
Nov 8 08:35:50 fileserv2 shutdown[3633]: shutting down for system reboot
Nov 8 08:35:51 fileserv2 smartd[3496]: smartd received signal 15: Terminated
Nov 8 08:35:51 fileserv2 smartd[3496]: smartd is exiting (exit status 0)
Nov 8 08:35:51 fileserv2 avahi-daemon[3464]: Got SIGTERM, quitting.
Nov 8 08:35:51 fileserv2 avahi-daemon[3464]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21f:c6ff:fe1e:c8d3.
Nov 8 08:35:51 fileserv2 avahi-daemon[3464]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.208.
Nov 8 08:35:53 fileserv2 nmbd[3408]: [2011/11/08 08:35:53, 0] nmbd/nmbd.c:terminate(58)
Nov 8 08:35:53 fileserv2 nmbd[3408]: Got SIGTERM: going down...
Nov 8 08:35:53 fileserv2 xinetd[3291]: Exiting...
Nov 8 08:35:57 fileserv2 hcid[3006]: Got disconnected from the system message bus
Nov 8 08:35:57 fileserv2 rpc.statd[2847]: Caught signal 15, un-registering and exiting.
Nov 8 08:35:57 fileserv2 auditd[2674]: The audit daemon is exiting.
Nov 8 08:35:57 fileserv2 kernel: audit(1320723357.542:17): audit_pid=0 old=2674 by auid=4294967295
Nov 8 08:35:57 fileserv2 pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide
Nov 8 08:35:57 fileserv2 pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped
Nov 8 08:35:58 fileserv2 pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function
Nov 8 08:35:58 fileserv2 pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run
Nov 8 08:35:58 fileserv2 kernel: Kernel logging (proc) stopped.
Nov 8 08:35:58 fileserv2 kernel: Kernel log daemon terminating.
Nov 8 08:35:59 fileserv2 exiting on signal 15
Nov 8 10:34:05 fileserv2 syslogd 1.4.1: restart.
Nov 8 10:34:05 fileserv2 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 8 10:34:05 fileserv2 kernel: Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 15:51:15 EST 2011
Nov 8 10:34:05 fileserv2 kernel: Command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov 8 10:34:05 fileserv2 kernel: BIOS-provided physical RAM map:
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 8 10:34:05 fileserv2 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Nov 8 10:34:05 fileserv2 kernel: DMI 2.4 present.
Nov 8 10:34:05 fileserv2 kernel: No NUMA configuration found
Nov 8 10:34:05 fileserv2 cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov 8 10:34:05 fileserv2 kernel: Faking a node at 0000000000000000-000000007ff80000
Nov 8 10:34:05 fileserv2 kernel: Bootmem setup node 0 0000000000000000-000000007ff80000
Nov 8 10:34:05 fileserv2 kernel: ACPI: PM-Timer IO Port: 0x808
Nov 8 10:34:05 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 8 10:34:05 fileserv2 kernel: Processor #0 7:7 APIC version 20
Nov 8 10:34:05 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 8 10:34:05 fileserv2 kernel: Processor #1 7:7 APIC version 20
Nov 8 10:34:05 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov 8 10:34:05 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov 8 10:34:05 fileserv2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 8 10:34:05 fileserv2 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov 8 10:34:05 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 8 10:34:05 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 8 10:34:05 fileserv2 kernel: Setting APIC routing to physical flat
Nov 8 10:34:05 fileserv2 kernel: ACPI: HPET id: 0x8086a301 base: 0xfed00000
Nov 8 10:34:05 fileserv2 kernel: Using ACPI (MADT) for SMP configuration information
Nov 8 10:34:05 fileserv2 kernel: Nosave address range: 000000000009d000 - 000000000009e000
Nov 8 10:34:05 fileserv2 kernel: Nosave address range: 000000000009e000 - 00000000000a0000
Nov 8 10:34:05 fileserv2 kernel: Nosave address range: 00000000000a0000 - 00000000000e4000
Nov 8 10:34:05 fileserv2 kernel: Nosave address range: 00000000000e4000 - 0000000000100000
Nov 8 10:34:05 fileserv2 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Nov 8 10:34:05 fileserv2 kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov 8 10:34:05 fileserv2 kernel: Built 1 zonelists. Total pages: 515389
Nov 8 10:34:05 fileserv2 kernel: Kernel command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov 8 10:34:05 fileserv2 kernel: Initializing CPU#0
Nov 8 10:34:05 fileserv2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov 8 10:34:05 fileserv2 kernel: Console: colour VGA+ 80x25
Nov 8 10:34:05 fileserv2 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 8 10:34:05 fileserv2 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 8 10:34:05 fileserv2 kernel: Checking aperture...
Nov 8 10:34:05 fileserv2 kernel: ACPI: DMAR not present
Nov 8 10:34:05 fileserv2 kernel: Memory: 1924332k/2096640k available (2592k kernel code, 171848k reserved, 1649k data, 224k init)
Nov 8 10:34:05 fileserv2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.45 BogoMIPS (lpj=2672725)
Nov 8 10:34:05 fileserv2 kernel: Security Framework v1.0.0 initialized
Nov 8 10:34:05 fileserv2 kernel: SELinux: Initializing.
Nov 8 10:34:05 fileserv2 kernel: selinux_register_security: Registering secondary module capability
Nov 8 10:34:05 fileserv2 kernel: Capability LSM initialized as secondary
Nov 8 10:34:05 fileserv2 kernel: Mount-cache hash table entries: 256
Nov 8 10:34:05 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 8 10:34:05 fileserv2 kernel: CPU: L2 cache: 3072K
Nov 8 10:34:05 fileserv2 kernel: using mwait in idle threads.
Nov 8 10:34:05 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov 8 10:34:05 fileserv2 kernel: CPU: Processor Core ID: 0
Nov 8 10:34:05 fileserv2 kernel: CPU0: Thermal monitoring enabled (TM2)
Nov 8 10:34:05 fileserv2 kernel: SMP alternatives: switching to UP code
Nov 8 10:34:05 fileserv2 kernel: ACPI: Core revision 20060707
Nov 8 10:34:05 fileserv2 kernel: Using local APIC timer interrupts.
Nov 8 10:34:05 fileserv2 kernel: Detected 16.704 MHz APIC timer.
Nov 8 10:34:05 fileserv2 kernel: SMP alternatives: switching to SMP code
Nov 8 10:34:05 fileserv2 kernel: Booting processor 1/2 APIC 0x1
Nov 8 10:34:05 fileserv2 kernel: Initializing CPU#1
Nov 8 10:34:05 fileserv2 kernel: Calibrating delay using timer specific routine.. 5345.41 BogoMIPS (lpj=2672705)
Nov 8 10:34:05 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 8 10:34:05 fileserv2 kernel: CPU: L2 cache: 3072K
Nov 8 10:34:05 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov 8 10:34:05 fileserv2 kernel: CPU: Processor Core ID: 1
Nov 8 10:34:05 fileserv2 kernel: CPU1: Thermal monitoring enabled (TM2)
Nov 8 10:34:05 fileserv2 kernel: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06
Nov 8 10:34:05 fileserv2 kernel: Brought up 2 CPUs
Nov 8 10:34:05 fileserv2 kernel: NMI watchdog testing PASSED.
Nov 8 10:34:05 fileserv2 kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Nov 8 10:34:05 fileserv2 kernel: time.c: Detected 2672.725 MHz processor.
Nov 8 10:34:05 fileserv2 kernel: migration_cost=15
Nov 8 10:34:05 fileserv2 kernel: checking if image is initramfs... it is
Nov 8 10:34:05 fileserv2 kernel: Freeing initrd memory: 2619k freed
Nov 8 10:34:05 fileserv2 kernel: NET: Registered protocol family 16
Nov 8 10:34:05 fileserv2 kernel: ACPI: bus type pci registered
Nov 8 10:34:05 fileserv2 kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
Nov 8 10:34:05 fileserv2 kernel: PCI: Not using MMCONFIG.
Nov 8 10:34:05 fileserv2 kernel: PCI: Using configuration type 1
Nov 8 10:34:05 fileserv2 kernel: ACPI: Interpreter enabled
Nov 8 10:34:05 fileserv2 kernel: ACPI: Using IOAPIC for interrupt routing
Nov 8 10:34:05 fileserv2 kernel: ACPI: No dock devices found.
Nov 8 10:34:05 fileserv2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 8 10:34:05 fileserv2 kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Nov 8 10:34:06 fileserv2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 8 10:34:06 fileserv2 kernel: pnp: PnP ACPI init
Nov 8 10:34:06 fileserv2 kernel: pnp: PnP ACPI: found 15 devices
Nov 8 10:34:06 fileserv2 kernel: usbcore: registered new driver usbfs
Nov 8 10:34:06 fileserv2 kernel: usbcore: registered new driver hub
Nov 8 10:34:06 fileserv2 kernel: PCI: Using ACPI for IRQ routing
Nov 8 10:34:06 fileserv2 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Nov 8 10:34:06 fileserv2 kernel: NetLabel: Initializing
Nov 8 10:34:06 fileserv2 kernel: NetLabel: domain hash size = 128
Nov 8 10:34:06 fileserv2 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 8 10:34:06 fileserv2 kernel: NetLabel: unlabeled traffic allowed by default
Nov 8 10:34:06 fileserv2 kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
Nov 8 10:34:06 fileserv2 kernel: hpet0: 4 64-bit timers, 14318180 Hz
Nov 8 10:34:06 fileserv2 kernel: ACPI: DMAR not present
Nov 8 10:34:06 fileserv2 kernel: PCI-GART: No AMD northbridge found.
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:06: ioport range 0x290-0x297 has been reserved
Nov 8 10:34:06 fileserv2 rpc.statd[2850]: Version 1.0.9 Starting
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
Nov 8 10:34:06 fileserv2 rpc.statd[2850]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:07: iomem range 0xffa00000-0xffafffff has been reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
Nov 8 10:34:06 fileserv2 kernel: pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
Nov 8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:01.0
Nov 8 10:34:06 fileserv2 kernel: IO window: c000-cfff
Nov 8 10:34:06 fileserv2 kernel: MEM window: fe900000-fe9fffff
Nov 8 10:34:06 fileserv2 kernel: PREFETCH window 0x00000000d0000000-0x00000000dfffffff
Nov 8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:1c.0
Nov 8 10:34:06 fileserv2 kernel: IO window: disabled.
Nov 8 10:34:06 fileserv2 kernel: MEM window: disabled.
Nov 8 10:34:06 fileserv2 kernel: PREFETCH window 0x00000000fdf00000-0x00000000fdffffff
Nov 8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:1c.4
Nov 8 10:34:06 fileserv2 kernel: IO window: e000-efff
Nov 8 10:34:06 fileserv2 kernel: MEM window: feb00000-febfffff
Nov 8 10:34:06 fileserv2 kernel: PREFETCH window: disabled.
Nov 8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:1c.5
Nov 8 10:34:06 fileserv2 kernel: IO window: d000-dfff
Nov 8 10:34:06 fileserv2 kernel: MEM window: fea00000-feafffff
Nov 8 10:34:06 fileserv2 kernel: PREFETCH window: disabled.
Nov 8 10:34:06 fileserv2 kernel: PCI: Bridge: 0000:00:1e.0
Nov 8 10:34:06 fileserv2 kernel: IO window: disabled.
Nov 8 10:34:06 fileserv2 kernel: MEM window: disabled.
Nov 8 10:34:06 fileserv2 kernel: PREFETCH window: disabled.
Nov 8 10:34:06 fileserv2 kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 8 10:34:06 fileserv2 kernel: GSI 17 sharing vector 0xB1 and IRQ 17
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1c.5[b] -> GSI 16 (level, low) -> IRQ 169
Nov 8 10:34:06 fileserv2 kernel: NET: Registered protocol family 2
Nov 8 10:34:06 fileserv2 kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 8 10:34:06 fileserv2 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Nov 8 10:34:06 fileserv2 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 8 10:34:06 fileserv2 kernel: TCP: Hash tables configured (established 262144 bind 65536)
Nov 8 10:34:06 fileserv2 kernel: TCP reno registered
Nov 8 10:34:06 fileserv2 kernel: audit: initializing netlink socket (disabled)
Nov 8 10:34:06 fileserv2 kernel: type=2000 audit(1320748401.436:1): initialized
Nov 8 10:34:06 fileserv2 kernel: Total HugeTLB memory allocated, 0
Nov 8 10:34:06 fileserv2 kernel: VFS: Disk quotas dquot_6.5.1
Nov 8 10:34:06 fileserv2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 8 10:34:06 fileserv2 kernel: Initializing Cryptographic API
Nov 8 10:34:06 fileserv2 kernel: alg: No test for crc32c (crc32c-generic)
Nov 8 10:34:06 fileserv2 kernel: ksign: Installing public key data
Nov 8 10:34:06 fileserv2 kernel: Loading keyring
Nov 8 10:34:06 fileserv2 kernel: - Added public key C099FB4D84A418B6
Nov 8 10:34:06 fileserv2 kernel: - User ID: CentOS (Kernel Module GPG key)
Nov 8 10:34:06 fileserv2 kernel: io scheduler noop registered
Nov 8 10:34:06 fileserv2 kernel: io scheduler anticipatory registered
Nov 8 10:34:06 fileserv2 kernel: io scheduler deadline registered
Nov 8 10:34:06 fileserv2 kernel: io scheduler cfq registered (default)
Nov 8 10:34:06 fileserv2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 8 10:34:06 fileserv2 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707]
Nov 8 10:34:06 fileserv2 kernel: ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707]
Nov 8 10:34:06 fileserv2 kernel: Real Time Clock Driver v1.12ac
Nov 8 10:34:06 fileserv2 kernel: Non-volatile memory driver v1.2
Nov 8 10:34:06 fileserv2 kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 8 10:34:06 fileserv2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 8 10:34:06 fileserv2 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 8 10:34:06 fileserv2 kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 8 10:34:06 fileserv2 kernel: brd: module loaded
Nov 8 10:34:06 fileserv2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 8 10:34:06 fileserv2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 8 10:34:06 fileserv2 kernel: ide-floppy driver 0.99.newide
Nov 8 10:34:06 fileserv2 kernel: usbcore: registered new driver hiddev
Nov 8 10:34:06 fileserv2 kernel: usbcore: registered new driver usbhid
Nov 8 10:34:06 fileserv2 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Nov 8 10:34:06 fileserv2 kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Nov 8 10:34:06 fileserv2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 8 10:34:06 fileserv2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 8 10:34:06 fileserv2 kernel: mice: PS/2 mouse device common for all mice
Nov 8 10:34:06 fileserv2 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 8 10:34:06 fileserv2 kernel: md: bitmap version 4.39
Nov 8 10:34:06 fileserv2 kernel: TCP bic registered
Nov 8 10:34:06 fileserv2 kernel: Initializing IPsec netlink socket
Nov 8 10:34:06 fileserv2 kernel: NET: Registered protocol family 1
Nov 8 10:34:06 fileserv2 kernel: NET: Registered protocol family 17
Nov 8 10:34:06 fileserv2 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 8 10:34:06 fileserv2 kernel: Initalizing network drop monitor service
Nov 8 10:34:06 fileserv2 kernel: Freeing unused kernel memory: 224k freed
Nov 8 10:34:06 fileserv2 kernel: Write protecting the kernel read-only data: 519k
Nov 8 10:34:06 fileserv2 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov 8 10:34:06 fileserv2 kernel: GSI 18 sharing vector 0xE1 and IRQ 18
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: debug port 1
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: irq 225, io mem 0xfe8ffc00
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 8 10:34:06 fileserv2 kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 8 10:34:06 fileserv2 kernel: hub 1-0:1.0: USB hub found
Nov 8 10:34:06 fileserv2 kernel: hub 1-0:1.0: 6 ports detected
Nov 8 10:34:06 fileserv2 kernel: GSI 19 sharing vector 0xE9 and IRQ 19
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfe8ff800
Nov 8 10:34:06 fileserv2 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 8 10:34:06 fileserv2 kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 8 10:34:06 fileserv2 kernel: hub 2-0:1.0: USB hub found
Nov 8 10:34:06 fileserv2 kernel: hub 2-0:1.0: 6 ports detected
Nov 8 10:34:06 fileserv2 kernel: USB Universal Host Controller Interface driver v3.0
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Nov 8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Nov 8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000b800
Nov 8 10:34:06 fileserv2 kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 8 10:34:06 fileserv2 kernel: hub 3-0:1.0: USB hub found
Nov 8 10:34:06 fileserv2 kernel: hub 3-0:1.0: 2 ports detected
Nov 8 10:34:06 fileserv2 kernel: GSI 20 sharing vector 0x32 and IRQ 20
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 50
Nov 8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Nov 8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Nov 8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.1: irq 50, io base 0x0000b880
Nov 8 10:34:06 fileserv2 kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 8 10:34:06 fileserv2 kernel: hub 4-0:1.0: USB hub found
Nov 8 10:34:06 fileserv2 kernel: hub 4-0:1.0: 2 ports detected
Nov 8 10:34:06 fileserv2 kdump: kexec: loaded kdump kernel
Nov 8 10:34:06 fileserv2 kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Nov 8 10:34:06 fileserv2 kdump: started up
Nov 8 10:34:06 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 225
Nov 8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Nov 8 10:34:06 fileserv2 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1a.2: irq 225, io base 0x0000bc00
Nov 8 10:34:07 fileserv2 kernel: usb usb5: configuration #1 chosen from 1 choice
Nov 8 10:34:07 fileserv2 kernel: hub 5-0:1.0: USB hub found
Nov 8 10:34:07 fileserv2 kernel: hub 5-0:1.0: 2 ports detected
Nov 8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000b080
Nov 8 10:34:07 fileserv2 kernel: usb usb6: configuration #1 chosen from 1 choice
Nov 8 10:34:07 fileserv2 kernel: hub 6-0:1.0: USB hub found
Nov 8 10:34:07 fileserv2 kernel: hub 6-0:1.0: 2 ports detected
Nov 8 10:34:07 fileserv2 kernel: GSI 21 sharing vector 0x3A and IRQ 21
Nov 8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 58
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.1: irq 58, io base 0x0000b400
Nov 8 10:34:07 fileserv2 kernel: usb usb7: configuration #1 chosen from 1 choice
Nov 8 10:34:07 fileserv2 kernel: hub 7-0:1.0: USB hub found
Nov 8 10:34:07 fileserv2 kernel: hub 7-0:1.0: 2 ports detected
Nov 8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Nov 8 10:34:07 fileserv2 kernel: uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000b480
Nov 8 10:34:07 fileserv2 kernel: usb usb8: configuration #1 chosen from 1 choice
Nov 8 10:34:07 fileserv2 kernel: hub 8-0:1.0: USB hub found
Nov 8 10:34:07 fileserv2 kernel: hub 8-0:1.0: 2 ports detected
Nov 8 10:34:07 fileserv2 kernel: md: raid1 personality registered for level 1
Nov 8 10:34:07 fileserv2 kernel: SCSI subsystem initialized
Nov 8 10:34:07 fileserv2 kernel: GSI 22 sharing vector 0x42 and IRQ 22
Nov 8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 22 (level, low) -> IRQ 66
Nov 8 10:34:07 fileserv2 kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Nov 8 10:34:07 fileserv2 kernel: scsi0 : ata_piix
Nov 8 10:34:07 fileserv2 kernel: scsi1 : ata_piix
Nov 8 10:34:07 fileserv2 hcid[3009]: Bluetooth HCI daemon
Nov 8 10:34:07 fileserv2 kernel: ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 66
Nov 8 10:34:07 fileserv2 kernel: ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 66
Nov 8 10:34:07 fileserv2 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 8 10:34:07 fileserv2 kernel: ata1.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov 8 10:34:07 fileserv2 sdpd[3013]: Bluetooth SDP daemon
Nov 8 10:34:07 fileserv2 kernel: ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 8 10:34:07 fileserv2 hcid[3009]: Register path:/org/bluez fallback:1
Nov 8 10:34:07 fileserv2 kernel: ata1.00: configured for UDMA/133
Nov 8 10:34:07 fileserv2 kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 8 10:34:07 fileserv2 kernel: ata2.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov 8 10:34:07 fileserv2 kernel: ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 8 10:34:07 fileserv2 kernel: ata2.00: configured for UDMA/133
Nov 8 10:34:07 fileserv2 kernel: Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Nov 8 10:34:07 fileserv2 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 8 10:34:07 fileserv2 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 10:34:07 fileserv2 kernel: sda: Write Protect is off
Nov 8 10:34:07 fileserv2 kernel: SCSI device sda: drive cache: write back
Nov 8 10:34:07 fileserv2 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 10:34:07 fileserv2 kernel: sda: Write Protect is off
Nov 8 10:34:07 fileserv2 kernel: SCSI device sda: drive cache: write back
Nov 8 10:34:07 fileserv2 kernel: sda: sda1 sda2 sda3 sda4 < sda5 >
Nov 8 10:34:07 fileserv2 kernel: sd 0:0:0:0: Attached scsi disk sda
Nov 8 10:34:07 fileserv2 kernel: Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Nov 8 10:34:07 fileserv2 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 10:34:07 fileserv2 kernel: sdb: Write Protect is off
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdb: drive cache: write back
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 10:34:07 fileserv2 kernel: sdb: Write Protect is off
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdb: drive cache: write back
Nov 8 10:34:07 fileserv2 kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
Nov 8 10:34:07 fileserv2 kernel: sd 1:0:0:0: Attached scsi disk sdb
Nov 8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 22 (level, low) -> IRQ 66
Nov 8 10:34:07 fileserv2 kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Nov 8 10:34:07 fileserv2 kernel: scsi2 : ata_piix
Nov 8 10:34:07 fileserv2 kernel: scsi3 : ata_piix
Nov 8 10:34:07 fileserv2 kernel: ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 66
Nov 8 10:34:07 fileserv2 kernel: ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 66
Nov 8 10:34:07 fileserv2 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 8 10:34:07 fileserv2 kernel: ata3.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov 8 10:34:07 fileserv2 kernel: ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 8 10:34:07 fileserv2 kernel: ata3.00: configured for UDMA/133
Nov 8 10:34:07 fileserv2 kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 8 10:34:07 fileserv2 pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
Nov 8 10:34:07 fileserv2 kernel: ata4.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
Nov 8 10:34:07 fileserv2 kernel: ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 8 10:34:07 fileserv2 kernel: ata4.00: configured for UDMA/133
Nov 8 10:34:07 fileserv2 kernel: Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Nov 8 10:34:07 fileserv2 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 10:34:07 fileserv2 kernel: sdc: Write Protect is off
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdc: drive cache: write back
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 10:34:07 fileserv2 kernel: sdc: Write Protect is off
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdc: drive cache: write back
Nov 8 10:34:07 fileserv2 kernel: sdc: sdc1
Nov 8 10:34:07 fileserv2 kernel: sd 2:0:0:0: Attached scsi disk sdc
Nov 8 10:34:07 fileserv2 kernel: Vendor: ATA Model: SAMSUNG HD502HI Rev: 1AG0
Nov 8 10:34:07 fileserv2 kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 10:34:07 fileserv2 kernel: sdd: Write Protect is off
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdd: drive cache: write back
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
Nov 8 10:34:07 fileserv2 kernel: sdd: Write Protect is off
Nov 8 10:34:07 fileserv2 kernel: SCSI device sdd: drive cache: write back
Nov 8 10:34:07 fileserv2 kernel: sdd: sdd1
Nov 8 10:34:07 fileserv2 kernel: sd 3:0:0:0: Attached scsi disk sdd
Nov 8 10:34:07 fileserv2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Nov 8 10:34:07 fileserv2 kernel: scsi4 : pata_marvell
Nov 8 10:34:07 fileserv2 kernel: scsi5 : pata_marvell
Nov 8 10:34:07 fileserv2 kernel: ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 169
Nov 8 10:34:07 fileserv2 kernel: ata6: DUMMY
Nov 8 10:34:07 fileserv2 kernel: ata5.00: ATAPI: Optiarc DVD RW AD-5200A, 1.09, max UDMA/66
Nov 8 10:34:07 fileserv2 kernel: ata5.00: configured for UDMA/66
Nov 8 10:34:07 fileserv2 pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-egate.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
Nov 8 10:34:07 fileserv2 kernel: Vendor: Optiarc Model: DVD RW AD-5200A Rev: 1.09
Nov 8 10:34:07 fileserv2 pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
Nov 8 10:34:07 fileserv2 kernel: Type: CD-ROM ANSI SCSI revision: 05
Nov 8 10:34:07 fileserv2 kernel: device-mapper: uevent: version 1.0.3
Nov 8 10:34:07 fileserv2 kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
Nov 8 10:34:07 fileserv2 kernel: device-mapper: dm-raid45: initialized v0.2594l
Nov 8 10:34:07 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov 8 10:34:07 fileserv2 kernel: md: autorun ...
Nov 8 10:34:07 fileserv2 kernel: md: considering sdd1 ...
Nov 8 10:34:07 fileserv2 kernel: md: adding sdd1 ...
Nov 8 10:34:07 fileserv2 kernel: md: adding sdc1 ...
Nov 8 10:34:07 fileserv2 kernel: md: sdb5 has different UUID to sdd1
Nov 8 10:34:07 fileserv2 kernel: md: sdb3 has different UUID to sdd1
Nov 8 10:34:07 fileserv2 kernel: md: sdb2 has different UUID to sdd1
Nov 8 10:34:08 fileserv2 kernel: md: sdb1 has different UUID to sdd1
Nov 8 10:34:08 fileserv2 kernel: md: sda5 has different UUID to sdd1
Nov 8 10:34:08 fileserv2 kernel: md: sda3 has different UUID to sdd1
Nov 8 10:34:08 fileserv2 kernel: md: sda2 has different UUID to sdd1
Nov 8 10:34:08 fileserv2 kernel: md: sda1 has different UUID to sdd1
Nov 8 10:34:08 fileserv2 kernel: md: created md4
Nov 8 10:34:08 fileserv2 kernel: md: bind<sdc1>
Nov 8 10:34:08 fileserv2 kernel: md: bind<sdd1>
Nov 8 10:34:08 fileserv2 kernel: md: running: <sdd1><sdc1>
Nov 8 10:34:08 fileserv2 kernel: raid1: raid set md4 active with 2 out of 2 mirrors
Nov 8 10:34:08 fileserv2 kernel: md: considering sdb5 ...
Nov 8 10:34:08 fileserv2 kernel: md: adding sdb5 ...
Nov 8 10:34:08 fileserv2 kernel: md: sdb3 has different UUID to sdb5
Nov 8 10:34:08 fileserv2 kernel: md: sdb2 has different UUID to sdb5
Nov 8 10:34:08 fileserv2 kernel: md: sdb1 has different UUID to sdb5
Nov 8 10:34:08 fileserv2 kernel: md: adding sda5 ...
Nov 8 10:34:08 fileserv2 kernel: md: sda3 has different UUID to sdb5
Nov 8 10:34:08 fileserv2 kernel: md: sda2 has different UUID to sdb5
Nov 8 10:34:08 fileserv2 kernel: md: sda1 has different UUID to sdb5
Nov 8 10:34:08 fileserv2 kernel: md: created md3
Nov 8 10:34:08 fileserv2 kernel: md: bind<sda5>
Nov 8 10:34:08 fileserv2 kernel: md: bind<sdb5>
Nov 8 10:34:08 fileserv2 kernel: md: running: <sdb5><sda5>
Nov 8 10:34:08 fileserv2 kernel: raid1: raid set md3 active with 2 out of 2 mirrors
Nov 8 10:34:08 fileserv2 kernel: md: considering sdb3 ...
Nov 8 10:34:08 fileserv2 kernel: md: adding sdb3 ...
Nov 8 10:34:08 fileserv2 kernel: md: sdb2 has different UUID to sdb3
Nov 8 10:34:08 fileserv2 kernel: md: sdb1 has different UUID to sdb3
Nov 8 10:34:08 fileserv2 kernel: md: adding sda3 ...
Nov 8 10:34:08 fileserv2 kernel: md: sda2 has different UUID to sdb3
Nov 8 10:34:08 fileserv2 kernel: md: sda1 has different UUID to sdb3
Nov 8 10:34:08 fileserv2 kernel: md: created md1
Nov 8 10:34:08 fileserv2 kernel: md: bind<sda3>
Nov 8 10:34:08 fileserv2 kernel: md: bind<sdb3>
Nov 8 10:34:08 fileserv2 kernel: md: running: <sdb3><sda3>
Nov 8 10:34:08 fileserv2 kernel: raid1: raid set md1 active with 2 out of 2 mirrors
Nov 8 10:34:08 fileserv2 kernel: md: considering sdb2 ...
Nov 8 10:34:08 fileserv2 kernel: md: adding sdb2 ...
Nov 8 10:34:08 fileserv2 kernel: md: sdb1 has different UUID to sdb2
Nov 8 10:34:08 fileserv2 kernel: md: adding sda2 ...
Nov 8 10:34:08 fileserv2 kernel: md: sda1 has different UUID to sdb2
Nov 8 10:34:08 fileserv2 kernel: md: created md2
Nov 8 10:34:08 fileserv2 kernel: md: bind<sda2>
Nov 8 10:34:08 fileserv2 kernel: md: bind<sdb2>
Nov 8 10:34:08 fileserv2 kernel: md: running: <sdb2><sda2>
Nov 8 10:34:08 fileserv2 kernel: raid1: raid set md2 active with 2 out of 2 mirrors
Nov 8 10:34:08 fileserv2 kernel: md: considering sdb1 ...
Nov 8 10:34:08 fileserv2 kernel: md: adding sdb1 ...
Nov 8 10:34:08 fileserv2 kernel: md: adding sda1 ...
Nov 8 10:34:08 fileserv2 kernel: md: created md0
Nov 8 10:34:08 fileserv2 kernel: md: bind<sda1>
Nov 8 10:34:08 fileserv2 kernel: md: bind<sdb1>
Nov 8 10:34:08 fileserv2 kernel: md: running: <sdb1><sda1>
Nov 8 10:34:08 fileserv2 kernel: raid1: raid set md0 active with 2 out of 2 mirrors
Nov 8 10:34:08 fileserv2 kernel: md: ... autorun DONE.
Nov 8 10:34:08 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov 8 10:34:08 fileserv2 kernel: md: autorun ...
Nov 8 10:34:08 fileserv2 kernel: md: ... autorun DONE.
Nov 8 10:34:08 fileserv2 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:34:08 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 10:34:08 fileserv2 kernel: SELinux: Disabled at runtime.
Nov 8 10:34:08 fileserv2 kernel: type=1404 audit(1320748426.753:2): selinux=0 auid=4294967295 ses=4294967295
Nov 8 10:34:08 fileserv2 kernel: input: PC Speaker as /class/input/input2
Nov 8 10:34:08 fileserv2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 8 10:34:08 fileserv2 kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Nov 8 10:34:08 fileserv2 kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Nov 8 10:34:08 fileserv2 kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
Nov 8 10:34:08 fileserv2 kernel: scsi 4:0:0:0: Attached scsi generic sg4 type 5
Nov 8 10:34:08 fileserv2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 8 10:34:08 fileserv2 kernel: sky2 driver version 1.22
Nov 8 10:34:08 fileserv2 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 177
Nov 8 10:34:08 fileserv2 kernel: sky2 0000:02:00.0: v1.22 addr 0xfeafc000 irq 177 Yukon-2 EC Ultra rev 3
Nov 8 10:34:08 fileserv2 kernel: sky2 eth0: addr 00:1f:c6:1e:c8:d3
Nov 8 10:34:08 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
Nov 8 10:34:08 fileserv2 kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 66
Nov 8 10:34:08 fileserv2 kernel: hda_codec: ALC883: BIOS auto-probing.
Nov 8 10:34:08 fileserv2 kernel: ACPI: PCI Interrupt 0000:01:00.1[b] -> GSI 17 (level, low) -> IRQ 177
Nov 8 10:34:08 fileserv2 kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Nov 8 10:34:08 fileserv2 kernel: Uniform CD-ROM driver Revision: 3.20
Nov 8 10:34:08 fileserv2 kernel: floppy0: no floppy controllers found
Nov 8 10:34:08 fileserv2 kernel: work still pending
Nov 8 10:34:08 fileserv2 kernel: lp: driver loaded but no devices found
Nov 8 10:34:08 fileserv2 kernel: ACPI: Power Button (FF) [PWRF]
Nov 8 10:34:08 fileserv2 kernel: ACPI: Power Button (CM) [PWRB]
Nov 8 10:34:08 fileserv2 kernel: ACPI: Mapper loaded
Nov 8 10:34:08 fileserv2 kernel: dell-wmi: No known WMI GUID found
Nov 8 10:34:08 fileserv2 kernel: md: Autodetecting RAID arrays.
Nov 8 10:34:08 fileserv2 kernel: md: autorun ...
Nov 8 10:34:08 fileserv2 kernel: md: ... autorun DONE.
Nov 8 10:34:08 fileserv2 kernel: device-mapper: multipath: version 1.0.5 loaded
Nov 8 10:34:08 fileserv2 kernel: device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Nov 8 10:34:08 fileserv2 kernel: device-mapper: ioctl: error adding target to table
Nov 8 10:34:08 fileserv2 kernel: device-mapper: ioctl: device doesn't appear to be in the dev hash table.
Nov 8 10:34:08 fileserv2 kernel: EXT3 FS on md2, internal journal
Nov 8 10:34:08 fileserv2 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:34:08 fileserv2 kernel: EXT3 FS on md4, internal journal
Nov 8 10:34:08 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 10:34:08 fileserv2 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:34:08 fileserv2 kernel: EXT3 FS on md3, internal journal
Nov 8 10:34:08 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 10:34:08 fileserv2 kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:34:08 fileserv2 kernel: EXT3 FS on md0, internal journal
Nov 8 10:34:08 fileserv2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 8 10:34:08 fileserv2 kernel: Adding 1020024k swap on /dev/md1. Priority:-1 extents:1 across:1020024k
Nov 8 10:34:08 fileserv2 kernel: IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Nov 8 10:34:08 fileserv2 kernel: microcode: CPU1 updated from revision 0x60c to 0x60f, date = 09292010
Nov 8 10:34:08 fileserv2 kernel: microcode: CPU0 updated from revision 0x60c to 0x60f, date = 09292010
Nov 8 10:34:08 fileserv2 kernel: Loading iSCSI transport class v2.0-871.
Nov 8 10:34:08 fileserv2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Nov 8 10:34:08 fileserv2 kernel: All bugs added by David S. Miller <davem@redhat.com>
Nov 8 10:34:08 fileserv2 kernel: cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
Nov 8 10:34:08 fileserv2 kernel: iscsi: registered transport (cxgb3i)
Nov 8 10:34:08 fileserv2 kernel: NET: Registered protocol family 10
Nov 8 10:34:08 fileserv2 kernel: lo: Disabled Privacy Extensions
Nov 8 10:34:08 fileserv2 kernel: IPv6 over IPv4 tunneling driver
Nov 8 10:34:08 fileserv2 kernel: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Nov 8 10:34:08 fileserv2 kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
Nov 8 10:34:08 fileserv2 kernel: iscsi: registered transport (bnx2i)
Nov 8 10:34:08 fileserv2 kernel: iscsi: registered transport (tcp)
Nov 8 10:34:08 fileserv2 kernel: iscsi: registered transport (iser)
Nov 8 10:34:08 fileserv2 kernel: iscsi: registered transport (be2iscsi)
Nov 8 10:34:09 fileserv2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 8 10:34:09 fileserv2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 8 10:34:09 fileserv2 kernel: Netfilter messages via NETLINK v0.30.
Nov 8 10:34:09 fileserv2 kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
Nov 8 10:34:09 fileserv2 kernel: sky2 eth0: enabling interface
Nov 8 10:34:09 fileserv2 kernel: sky2 eth0: ram buffer 0K
Nov 8 10:34:09 fileserv2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 8 10:34:09 fileserv2 kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Nov 8 10:34:09 fileserv2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: Core ver 2.10
Nov 8 10:34:09 fileserv2 kernel: NET: Registered protocol family 31
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: HCI device and connection manager initialized
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: HCI socket layer initialized
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: L2CAP ver 2.8
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: L2CAP socket layer initialized
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: RFCOMM socket layer initialized
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: RFCOMM TTY layer initialized
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: RFCOMM ver 1.8
Nov 8 10:34:09 fileserv2 kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Nov 8 10:34:09 fileserv2 hidd[3170]: Bluetooth HID daemon
Nov 8 10:34:11 fileserv2 automount[3214]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Nov 8 10:34:11 fileserv2 hpiod: 1.6.7 accepting connections at 2208...
Nov 8 10:34:12 fileserv2 xinetd[3292]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Nov 8 10:34:12 fileserv2 xinetd[3292]: Started working: 0 available services
Nov 8 10:34:13 fileserv2 gpm[3338]: *** info [startup.c(95)]:
Nov 8 10:34:13 fileserv2 gpm[3338]: Started gpm successfully. Entered daemon mode.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Successfully dropped root privileges.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: avahi-daemon 0.6.16 starting up.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Successfully called chroot().
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Successfully dropped remaining capabilities.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: No service found in /etc/avahi/services.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: New relevant interface eth0.IPv6 for mDNS.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21f:c6ff:fe1e:c8d3.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: New relevant interface eth0.IPv4 for mDNS.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.208.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Network interface enumeration completed.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Registering new address record for fe80::21f:c6ff:fe1e:c8d3 on eth0.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Registering new address record for 192.168.0.208 on eth0.
Nov 8 10:34:14 fileserv2 avahi-daemon[3465]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov 8 10:34:14 fileserv2 smartd[3495]: smartd version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Nov 8 10:34:14 fileserv2 smartd[3495]: Home page is http://smartmontools.sourceforge.net/
Nov 8 10:34:14 fileserv2 smartd[3495]: Opened configuration file /etc/smartd.conf
Nov 8 10:34:14 fileserv2 smartd[3495]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Nov 8 10:34:14 fileserv2 smartd[3495]: Problem creating device name scan list
Nov 8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sda, opened
Nov 8 10:34:14 fileserv2 smartd[3495]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer.
Nov 8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sda, opened
Nov 8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sda, found in smartd database.
Nov 8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sda, is SMART capable. Adding to "monitor" list.
Nov 8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sdb, opened
Nov 8 10:34:14 fileserv2 smartd[3495]: Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer.
Nov 8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sdb, opened
Nov 8 10:34:14 fileserv2 smartd[3495]: Device: /dev/sdb, found in smartd database.
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list.
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdc, opened
Nov 8 10:34:15 fileserv2 smartd[3495]: Device /dev/sdc: using '-d sat' for ATA disk behind SAT layer.
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdc, opened
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdc, found in smartd database.
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list.
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdd, opened
Nov 8 10:34:15 fileserv2 smartd[3495]: Device /dev/sdd: using '-d sat' for ATA disk behind SAT layer.
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdd, opened
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdd, found in smartd database.
Nov 8 10:34:15 fileserv2 avahi-daemon[3465]: Server startup complete. Host name is fileserv2.local. Local service cookie is 3859607675.
Nov 8 10:34:15 fileserv2 smartd[3495]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list.
Nov 8 10:34:15 fileserv2 smartd[3495]: Monitoring 0 ATA and 4 SCSI devices
Nov 8 10:34:15 fileserv2 smartd[3497]: smartd has fork()ed into background mode. New PID=3497.
Nov 8 10:52:28 fileserv2 smbd[3406]: [2011/11/08 10:52:28, 0] lib/util_sock.c:get_peer_addr(1224)
Nov 8 10:52:28 fileserv2 smbd[3406]: getpeername failed. Error was Конечная точка передачи не подсоединена
Nov 8 10:52:28 fileserv2 smbd[3817]: [2011/11/08 10:52:28, 0] lib/util_sock.c:get_peer_addr(1224)
Nov 8 10:52:28 fileserv2 smbd[3817]: getpeername failed. Error was Конечная точка передачи не подсоединена
Nov 8 10:52:28 fileserv2 smbd[3817]: [2011/11/08 10:52:28, 0] lib/util_sock.c:write_data(562)
Nov 8 10:52:28 fileserv2 smbd[3817]: write_data: write failure in writing to client 0.0.0.0. Error Соединение сброшено другой стороной
Nov 8 10:52:28 fileserv2 smbd[3817]: [2011/11/08 10:52:28, 0] lib/util_sock.c:send_smb(761)
Nov 8 10:52:28 fileserv2 smbd[3817]: Error writing 4 bytes to client. -1. (Соединение сброшено другой стороной)
Nov 8 10:55:18 fileserv2 shutdown[3833]: shutting down for system reboot
Nov 8 10:55:19 fileserv2 smartd[3497]: smartd received signal 15: Terminated
Nov 8 10:55:19 fileserv2 smartd[3497]: smartd is exiting (exit status 0)
Nov 8 10:55:19 fileserv2 avahi-daemon[3465]: Got SIGTERM, quitting.
Nov 8 10:55:19 fileserv2 avahi-daemon[3465]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21f:c6ff:fe1e:c8d3.
Nov 8 10:55:19 fileserv2 avahi-daemon[3465]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.208.
Nov 8 10:55:23 fileserv2 nmbd[3409]: [2011/11/08 10:55:23, 0] nmbd/nmbd.c:terminate(58)
Nov 8 10:55:23 fileserv2 nmbd[3409]: Got SIGTERM: going down...
Nov 8 10:55:23 fileserv2 xinetd[3292]: Exiting...
Nov 8 10:55:27 fileserv2 hcid[3009]: Got disconnected from the system message bus
Nov 8 10:55:27 fileserv2 rpc.statd[2850]: Caught signal 15, un-registering and exiting.
Nov 8 10:55:27 fileserv2 auditd[2677]: The audit daemon is exiting.
Nov 8 10:55:27 fileserv2 kernel: audit(1320731727.840:35): audit_pid=0 old=2677 by auid=4294967295
Nov 8 10:55:28 fileserv2 pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide
Nov 8 10:55:28 fileserv2 pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped
Nov 8 10:55:29 fileserv2 pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function
Nov 8 10:55:29 fileserv2 pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run
Nov 8 10:55:29 fileserv2 kernel: Kernel logging (proc) stopped.
Nov 8 10:55:29 fileserv2 kernel: Kernel log daemon terminating.
Nov 8 10:55:30 fileserv2 exiting on signal 15
Nov 8 10:57:02 fileserv2 syslogd 1.4.1: restart.
Nov 8 10:57:02 fileserv2 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 8 10:57:02 fileserv2 kernel: Linux version 2.6.18-238.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu Jan 13 15:51:15 EST 2011
Nov 8 10:57:02 fileserv2 kernel: Command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov 8 10:57:02 fileserv2 kernel: BIOS-provided physical RAM map:
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 8 10:57:02 fileserv2 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Nov 8 10:57:02 fileserv2 kernel: DMI 2.4 present.
Nov 8 10:57:02 fileserv2 kernel: No NUMA configuration found
Nov 8 10:57:02 fileserv2 cpuspeed: Enabling ondemand cpu frequency scaling governor
Nov 8 10:57:02 fileserv2 kernel: Faking a node at 0000000000000000-000000007ff80000
Nov 8 10:57:02 fileserv2 kernel: Bootmem setup node 0 0000000000000000-000000007ff80000
Nov 8 10:57:02 fileserv2 kernel: ACPI: PM-Timer IO Port: 0x808
Nov 8 10:57:02 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 8 10:57:02 fileserv2 kernel: Processor #0 7:7 APIC version 20
Nov 8 10:57:02 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 8 10:57:02 fileserv2 kernel: Processor #1 7:7 APIC version 20
Nov 8 10:57:02 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Nov 8 10:57:02 fileserv2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Nov 8 10:57:02 fileserv2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 8 10:57:02 fileserv2 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov 8 10:57:02 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 8 10:57:02 fileserv2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 8 10:57:02 fileserv2 kernel: Setting APIC routing to physical flat
Nov 8 10:57:02 fileserv2 kernel: ACPI: HPET id: 0x8086a301 base: 0xfed00000
Nov 8 10:57:02 fileserv2 kernel: Using ACPI (MADT) for SMP configuration information
Nov 8 10:57:02 fileserv2 kernel: Nosave address range: 000000000009d000 - 000000000009e000
Nov 8 10:57:02 fileserv2 kernel: Nosave address range: 000000000009e000 - 00000000000a0000
Nov 8 10:57:02 fileserv2 kernel: Nosave address range: 00000000000a0000 - 00000000000e4000
Nov 8 10:57:02 fileserv2 kernel: Nosave address range: 00000000000e4000 - 0000000000100000
Nov 8 10:57:02 fileserv2 kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Nov 8 10:57:02 fileserv2 kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Nov 8 10:57:02 fileserv2 kernel: Built 1 zonelists. Total pages: 515389
Nov 8 10:57:02 fileserv2 kernel: Kernel command line: ro root=/dev/md2 rhgb quiet crashkernel=128M@16M
Nov 8 10:57:02 fileserv2 kernel: Initializing CPU#0
Nov 8 10:57:02 fileserv2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov 8 10:57:02 fileserv2 kernel: Console: colour VGA+ 80x25
Nov 8 10:57:02 fileserv2 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 8 10:57:02 fileserv2 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 8 10:57:02 fileserv2 kernel: Checking aperture...
Nov 8 10:57:02 fileserv2 kernel: ACPI: DMAR not present
Nov 8 10:57:02 fileserv2 kernel: Memory: 1924332k/2096640k available (2592k kernel code, 171848k reserved, 1649k data, 224k init)
Nov 8 10:57:02 fileserv2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.45 BogoMIPS (lpj=2672726)
Nov 8 10:57:02 fileserv2 kernel: Security Framework v1.0.0 initialized
Nov 8 10:57:02 fileserv2 kernel: SELinux: Initializing.
Nov 8 10:57:02 fileserv2 kernel: selinux_register_security: Registering secondary module capability
Nov 8 10:57:02 fileserv2 kernel: Capability LSM initialized as secondary
Nov 8 10:57:02 fileserv2 kernel: Mount-cache hash table entries: 256
Nov 8 10:57:02 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 8 10:57:02 fileserv2 kernel: CPU: L2 cache: 3072K
Nov 8 10:57:02 fileserv2 kernel: using mwait in idle threads.
Nov 8 10:57:02 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov 8 10:57:02 fileserv2 kernel: CPU: Processor Core ID: 0
Nov 8 10:57:02 fileserv2 kernel: CPU0: Thermal monitoring enabled (TM2)
Nov 8 10:57:02 fileserv2 kernel: SMP alternatives: switching to UP code
Nov 8 10:57:02 fileserv2 kernel: ACPI: Core revision 20060707
Nov 8 10:57:02 fileserv2 kernel: Using local APIC timer interrupts.
Nov 8 10:57:02 fileserv2 kernel: Detected 16.704 MHz APIC timer.
Nov 8 10:57:02 fileserv2 kernel: SMP alternatives: switching to SMP code
Nov 8 10:57:02 fileserv2 kernel: Booting processor 1/2 APIC 0x1
Nov 8 10:57:02 fileserv2 kernel: Initializing CPU#1
Nov 8 10:57:02 fileserv2 kernel: Calibrating delay using timer specific routine.. 5345.41 BogoMIPS (lpj=2672708)
Nov 8 10:57:02 fileserv2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 8 10:57:02 fileserv2 kernel: CPU: L2 cache: 3072K
Nov 8 10:57:02 fileserv2 kernel: CPU: Physical Processor ID: 0
Nov 8 10:57:03 fileserv2 kernel: CPU: Processor Core ID: 1
Nov 8 10:57:03 fileserv2 kernel: CPU1: Thermal monitoring enabled (TM2)
Nov 8 10:57:03 fileserv2 rpc.statd[2849]: Version 1.0.9 Starting
Nov 8 10:57:03 fileserv2 kernel: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06
Nov 8 10:57:03 fileserv2 kernel: Brought up 2 CPUs
Nov 8 10:57:03 fileserv2 kernel: NMI watchdog testing PASSED.
Nov 8 10:57:03 fileserv2 kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
Nov 8 10:57:03 fileserv2 kernel: time.c: Detected 2672.726 MHz processor.
Nov 8 10:57:03 fileserv2 rpc.statd[2849]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user
Nov 8 08:08:05 fileserv2 kernel: device-mapper: multipath: version 1.0.5 loaded
Nov 8 08:08:05 fileserv2 kernel: device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Nov 8 08:08:05 fileserv2 kernel: device-mapper: ioctl: error adding target to table
Nov 8 08:08:05 fileserv2 kernel: device-mapper: ioctl: device doesn't appear to be in the dev hash table.
О как, что то с дисками, надо гуглить
Увы, замена памяти не помогла!!!( Также заменил БП - тоже без результата. Попробовал подключить обычный 160 гб Sata Samsung - отформатил как обычный линукс раздел с файловой EXT3, с рейда копирование на этот винт в 95% давало битый фаил, а вот манипуляции копирования на самсунге проходят успешно, битые файлы не появляются. Стоит только опять начать копировать внутри рейда - файлы с тем же успехом повреждаются (мелкие файлы до 200 мб копируются нормально). Пробовал копировать большие файлы забитые нулями размера 3гб - копирование внутри рейда проходит без повреждений, контр. сумма - совпадает. Непойму что за мистика, помогите разобраться..((
Как вариант попробуйте в каждом рейде выдернуть сначала по одному диску (скажем 1 и 3) и попробовать что то скопировать с одного рейда (точнее того что от него останется) на другой, потом эти диски вставить и выдернуть другие (2 и 4) и повторить операцию.
Если проблема в винтах так вы её найдёте, если проблема в рейде - тоже сразу будет видно.
И всё таки поменять шлейфы к дискам - на новые.
Войдите или зарегистрируйтесь, чтобы ответить.
