Перестали работать устройства ввода

22.04.2012 12:02 · отредактировано #247538

Вчера при просмотре видео у меня наглухо зависла система. Клавиатура и мышь перестали работать. После ресета в биосе (у меня EFI) эти устройства работали нормально. Также в меню GRUB можно было пользоваться клавиатурой. При попытке загрузиться как в init5, так и в init3 устройства ввода переставали работать на стадии логина. Загрузка в init1 проходит исправно - всё прекрасно работает. Сейчас пишу загрузившись с liveusb Gentoo12.1, где указанной проблемы нет.
Система - ROSA2011 со всеми обновлениями.

text

$ uname -rm
3.1.6-desktop-nrj.69mib x86_64

Посоветуйте пожалуйста, как исправить эту неприятную ситуацию.

22.04.2012 12:44 #247544

Может, дело в lock-файлах для устройств?

22.04.2012 12:46 #247546

"awl" написал:
Посоветуйте пожалуйста, как исправить эту неприятную ситуацию.

Обычно такое случается, если после обновления xorg-server'а не были обновлены драйвера устройств ввода.
Название примерно такое xf86-input-evdev или xf86-input-keyboard и xf86-input-mouse.
Повторюсь, названия приблизительные, ищите аналогичные среди установленных пакетов и обновляйте.

22.04.2012 12:58 #247551

yars написал:
Может, дело в lock-файлах для устройств?

Можно поподробнее пожалуйста...

Lupo Alberto написал:

Обычно такое случается, если после обновления xorg-server'а не были обновлены драйвера устройств ввода.

xorg-server не помню даже когда в последний раз обновлялся. Сейчас на ROSA2011 похоже идут только обновления безопасности (думаю, что майнтайнеры плотно заняты ROSA2012 LTS)

22.04.2012 13:03 #247552

"awl" написал:
xorg-server не помню даже когда в последний раз обновлялся

...и всё же покажите /var/log/Xorg.0.log установленной системы, воспользовавшись «живым» диском.

22.04.2012 13:31 #247555

/var/log/Xorg.0.log пуст
На всякий случай содержимое Xorg.0.log.old:

Показать

Gentoo-2012 ~ # cat /media/linsys/var/log/Xorg.0.log.old
[ 81.411]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 81.430] X Protocol Version 11, Revision 0
[ 81.430] Build Operating System: Linux_2.6.33.7-server-2mnb Mandriva
[ 81.430] Current Operating System: Linux awl.myhost 3.0.1-desktop-nrj.69mib #1 SMP PREEMPT Sat Aug 6 16:03:01 CEST 2011 x86_64
[ 81.430] Kernel command line: BOOT_IMAGE=3.0.1-desktop-nrj.69mib root=UUID=a219cac8-d706-41d8-b6dd-4d7ec844f0b1 resume=UUID=6d840811-2843-4835-9555-ec3f782faad6 splash=silent vga=788
[ 81.430] Build Date: 26 July 2011 01:51:30AM
[ 81.430]
[ 81.430] Current version of pixman: 0.22.0
[ 81.430] Before reporting problems, check http://qa.mandriva.com
to make sure that you have the latest version.
[ 81.430] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 81.430] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 22 17:38:37 2012
[ 81.456] (==) Using config file: "/etc/X11/xorg.conf"
[ 81.456] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 81.456] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 81.485] (==) ServerLayout "layout1"
[ 81.485] (**) |-->Screen "screen1" (0)
[ 81.486] (**) | |-->Monitor "monitor1"
[ 81.486] (**) | |-->Device "device1"
[ 81.486] (**) Option "DontZap" "False"
[ 81.486] (**) Option "AllowMouseOpenFail"
[ 81.486] (==) Automatically adding devices
[ 81.486] (==) Automatically enabling devices
[ 81.486] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 81.486] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
[ 81.486] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 81.486] (II) Loader magic: 0x7d61a0
[ 81.486] (II) Module ABI versions:
[ 81.486] X.Org ANSI C Emulation: 0.4
[ 81.486] X.Org Video Driver: 10.0
[ 81.486] X.Org XInput driver : 12.2
[ 81.486] X.Org Server Extension : 5.0
[ 81.486] (--) PCI:*(0:0:2:0) 8086:0112:1043:844d rev 9, Mem @ 0xfb400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 81.486] (II) Open ACPI successful (/var/run/acpid.socket)
[ 81.486] (II) "extmod" will be loaded by default.
[ 81.486] (II) "dbe" will be loaded by default.
[ 81.486] (II) "glx" will be loaded by default.
[ 81.486] (II) "record" will be loaded by default.
[ 81.486] (II) "dri" will be loaded by default.
[ 81.486] (II) "dri2" will be loaded by default.
[ 81.486] (II) LoadModule: "v4l"
[ 81.548] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 81.559] (II) Module v4l: vendor="X.Org Foundation"
[ 81.559] compiled for 1.10.2, module version = 0.1.1
[ 81.559] ABI class: X.Org Video Driver, version 10.0
[ 81.559] (II) LoadModule: "extmod"
[ 81.587] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 81.591] (II) Module extmod: vendor="X.Org Foundation"
[ 81.591] compiled for 1.10.3, module version = 1.0.0
[ 81.591] Module class: X.Org Server Extension
[ 81.591] ABI class: X.Org Server Extension, version 5.0
[ 81.591] (II) Loading extension MIT-SCREEN-SAVER
[ 81.591] (II) Loading extension XFree86-VidModeExtension
[ 81.591] (II) Loading extension XFree86-DGA
[ 81.591] (II) Loading extension DPMS
[ 81.591] (II) Loading extension XVideo
[ 81.591] (II) Loading extension XVideo-MotionCompensation
[ 81.591] (II) Loading extension X-Resource
[ 81.591] (II) LoadModule: "dbe"
[ 81.591] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 81.611] (II) Module dbe: vendor="X.Org Foundation"
[ 81.611] compiled for 1.10.3, module version = 1.0.0
[ 81.611] Module class: X.Org Server Extension
[ 81.611] ABI class: X.Org Server Extension, version 5.0
[ 81.611] (II) Loading extension DOUBLE-BUFFER
[ 81.611] (II) LoadModule: "glx"
[ 81.612] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 81.635] (II) Module glx: vendor="X.Org Foundation"
[ 81.635] compiled for 1.10.3, module version = 1.0.0
[ 81.635] ABI class: X.Org Server Extension, version 5.0
[ 81.635] (==) AIGLX enabled
[ 81.635] (II) Loading extension GLX
[ 81.635] (II) LoadModule: "record"
[ 81.635] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 81.636] (II) Module record: vendor="X.Org Foundation"
[ 81.636] compiled for 1.10.3, module version = 1.13.0
[ 81.636] Module class: X.Org Server Extension
[ 81.636] ABI class: X.Org Server Extension, version 5.0
[ 81.636] (II) Loading extension RECORD
[ 81.636] (II) LoadModule: "dri"
[ 81.636] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 81.655] (II) Module dri: vendor="X.Org Foundation"
[ 81.655] compiled for 1.10.3, module version = 1.0.0
[ 81.655] ABI class: X.Org Server Extension, version 5.0
[ 81.655] (II) Loading extension XFree86-DRI
[ 81.655] (II) LoadModule: "dri2"
[ 81.655] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 81.661] (II) Module dri2: vendor="X.Org Foundation"
[ 81.661] compiled for 1.10.3, module version = 1.2.0
[ 81.661] ABI class: X.Org Server Extension, version 5.0
[ 81.661] (II) Loading extension DRI2
[ 81.661] (II) LoadModule: "intel"
[ 81.661] (II) Loading /usr/lib64/xorg/modules/drivers/intel-common/intel_drv.so
[ 81.696] (II) Module intel: vendor="X.Org Foundation"
[ 81.696] compiled for 1.10.2, module version = 2.15.0
[ 81.696] Module class: X.Org Video Driver
[ 81.696] ABI class: X.Org Video Driver, version 10.0
[ 81.696] (II) v4l driver for Video4Linux
[ 81.696] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 81.696] (++) using VT number 8

[ 81.800] (WW) Falling back to old probe method for v4l
[ 81.802] (II) Loading /usr/lib64/xorg/modules/drivers/intel-common/intel_drv.so
[ 81.802] drmOpenDevice: node name is /dev/dri/card0
[ 81.802] drmOpenDevice: open result is 9, (OK)
[ 81.802] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.802] drmOpenDevice: node name is /dev/dri/card0
[ 81.802] drmOpenDevice: open result is 9, (OK)
[ 81.802] drmOpenByBusid: drmOpenMinor returns 9
[ 81.802] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.802] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 81.802] (==) intel(0): RGB weight 888
[ 81.802] (==) intel(0): Default visual is TrueColor
[ 81.802] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge
[ 81.802] (--) intel(0): Chipset: "Sandybridge"
[ 81.802] (**) intel(0): Relaxed fencing enabled
[ 81.802] (**) intel(0): Framebuffer tiled
[ 81.802] (**) intel(0): Pixmaps tiled
[ 81.802] (**) intel(0): 3D buffers tiled
[ 81.802] (**) intel(0): SwapBuffers wait disabled
[ 81.802] (==) intel(0): video overlay key set to 0x101fe
[ 81.802] (II) intel(0): Output VGA1 using monitor section monitor1
[ 82.040] (II) intel(0): Output HDMI1 has no monitor section
[ 82.053] (II) intel(0): Output DP1 has no monitor section
[ 82.076] (II) intel(0): Output HDMI2 has no monitor section
[ 82.098] (II) intel(0): Output HDMI3 has no monitor section
[ 82.113] (II) intel(0): Output DP2 has no monitor section
[ 82.125] (II) intel(0): Output DP3 has no monitor section
[ 82.125] (II) intel(0): EDID for output VGA1
[ 82.363] (II) intel(0): EDID for output HDMI1
[ 82.363] (II) intel(0): Manufacturer: SAM Model: 570 Serial#: 1314271795
[ 82.363] (II) intel(0): Year: 2009 Week: 28
[ 82.363] (II) intel(0): EDID Version: 1.3
[ 82.363] (II) intel(0): Digital Display Input
[ 82.363] (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 82.363] (II) intel(0): Gamma: 2.20
[ 82.363] (II) intel(0): DPMS capabilities: Off
[ 82.363] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 82.363] (II) intel(0): First detailed timing is preferred mode
[ 82.363] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 82.363] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 82.363] (II) intel(0): Supported established timings:
[ 82.363] (II) intel(0): 720x400@70Hz
[ 82.363] (II) intel(0): 640x480@60Hz
[ 82.363] (II) intel(0): 640x480@67Hz
[ 82.363] (II) intel(0): 640x480@72Hz
[ 82.363] (II) intel(0): 640x480@75Hz
[ 82.363] (II) intel(0): 800x600@56Hz
[ 82.363] (II) intel(0): 800x600@60Hz
[ 82.363] (II) intel(0): 800x600@72Hz
[ 82.363] (II) intel(0): 800x600@75Hz
[ 82.363] (II) intel(0): 832x624@75Hz
[ 82.363] (II) intel(0): 1024x768@60Hz
[ 82.363] (II) intel(0): 1024x768@70Hz
[ 82.363] (II) intel(0): 1024x768@75Hz
[ 82.363] (II) intel(0): 1280x1024@75Hz
[ 82.363] (II) intel(0): 1152x864@75Hz
[ 82.363] (II) intel(0): Manufacturer's mask: 0
[ 82.363] (II) intel(0): Supported standard timings:
[ 82.363] (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 82.363] (II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 82.363] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 82.363] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 82.363] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 82.363] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 82.363] (II) intel(0): #6: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 82.363] (II) intel(0): Supported detailed timing:
[ 82.363] (II) intel(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 82.363] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 82.363] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 82.363] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 82.363] (II) intel(0): Monitor name: SyncMaster
[ 82.363] (II) intel(0): Serial No: H9XS701157
[ 82.363] (II) intel(0): Supported detailed timing:
[ 82.363] (II) intel(0): clock: 148.5 MHz Image Size: 510 x 287 mm
[ 82.363] (II) intel(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 82.363] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 82.363] (II) intel(0): Supported detailed timing:
[ 82.363] (II) intel(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 82.363] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 82.363] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 82.363] (II) intel(0): Supported detailed timing:
[ 82.363] (II) intel(0): clock: 74.2 MHz Image Size: 510 x 287 mm
[ 82.363] (II) intel(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 82.363] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 82.363] (II) intel(0): Supported detailed timing:
[ 82.363] (II) intel(0): clock: 27.0 MHz Image Size: 510 x 287 mm
[ 82.363] (II) intel(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 82.363] (II) intel(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 82.363] (II) intel(0): Supported detailed timing:
[ 82.363] (II) intel(0): clock: 27.0 MHz Image Size: 510 x 287 mm
[ 82.363] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 82.363] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 82.363] (II) intel(0): Number of EDID sections to follow: 1
[ 82.363] (II) intel(0): EDID (in hex):
[ 82.363] (II) intel(0): 00ffffffffffff004c2d70053332564e
[ 82.363] (II) intel(0): 1c13010380331d782aee91a3544c9926
[ 82.363] (II) intel(0): 0f5054bfef808100814081809500b300
[ 82.363] (II) intel(0): a940714f0101023a801871382d40582c
[ 82.363] (II) intel(0): 4500fe1f1100001e000000fd00384b1e
[ 82.363] (II) intel(0): 5111000a202020202020000000fc0053
[ 82.363] (II) intel(0): 796e634d61737465720a2020000000ff
[ 82.363] (II) intel(0): 00483958533730313135370a2020010f
[ 82.363] (II) intel(0): 02010400023a80d072382d40102c4580
[ 82.363] (II) intel(0): fe1f1100001e011d007251d01e206e28
[ 82.363] (II) intel(0): 5500fe1f1100001e011d00bc52d01e20
[ 82.363] (II) intel(0): b8285540fe1f1100001e8c0ad0902040
[ 82.363] (II) intel(0): 31200c405500fe1f110000188c0ad08a
[ 82.363] (II) intel(0): 20e02d10103e9600fe1f110000180000
[ 82.363] (II) intel(0): 00000000000000000000000000000000
[ 82.363] (II) intel(0): 00000000000000000000000000000003
[ 82.363] (II) intel(0): Printing probed modes for output HDMI1
[ 82.363] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 82.363] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 82.363] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 82.363] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 82.363] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 82.363] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 82.363] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 82.363] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 82.363] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 82.363] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 82.363] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 82.363] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 82.363] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 82.363] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 82.363] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 82.363] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 82.363] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 82.363] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 82.363] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 82.363] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 82.363] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 82.363] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 82.363] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 82.363] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 82.363] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 82.363] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 82.363] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 82.376] (II) intel(0): EDID for output DP1
[ 82.398] (II) intel(0): EDID for output HDMI2
[ 82.420] (II) intel(0): EDID for output HDMI3
[ 82.433] (II) intel(0): EDID for output DP2
[ 82.445] (II) intel(0): EDID for output DP3
[ 82.445] (II) intel(0): Output VGA1 disconnected
[ 82.445] (II) intel(0): Output HDMI1 connected
[ 82.445] (II) intel(0): Output DP1 disconnected
[ 82.445] (II) intel(0): Output HDMI2 disconnected
[ 82.445] (II) intel(0): Output HDMI3 disconnected
[ 82.445] (II) intel(0): Output DP2 disconnected
[ 82.445] (II) intel(0): Output DP3 disconnected
[ 82.445] (II) intel(0): Using user preference for initial modes
[ 82.445] (II) intel(0): Output HDMI1 using initial mode 1920x1080
[ 82.445] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 82.445] (II) intel(0): Kernel page flipping support detected, enabling
[ 82.445] (==) intel(0): DPI set to (96, 96)
[ 82.445] (II) Loading sub module "fb"
[ 82.445] (II) LoadModule: "fb"
[ 82.445] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 82.456] (II) Module fb: vendor="X.Org Foundation"
[ 82.456] compiled for 1.10.3, module version = 1.0.0
[ 82.456] ABI class: X.Org ANSI C Emulation, version 0.4
[ 82.456] (II) Loading sub module "dri2"
[ 82.456] (II) LoadModule: "dri2"
[ 82.456] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 82.456] (II) Module dri2: vendor="X.Org Foundation"
[ 82.456] compiled for 1.10.3, module version = 1.2.0
[ 82.456] ABI class: X.Org Server Extension, version 5.0
[ 82.456] (==) Depth 24 pixmap format is 32 bpp
[ 82.456] (II) intel(0): [DRI2] Setup complete
[ 82.456] (II) intel(0): [DRI2] DRI driver: i965
[ 82.456] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 82.475] (II) UXA(0): Driver registered support for the following operations:
[ 82.475] (II) solid
[ 82.475] (II) copy
[ 82.475] (II) composite (RENDER acceleration)
[ 82.475] (II) put_image
[ 82.475] (II) get_image
[ 82.475] (==) intel(0): Backing store disabled
[ 82.475] (==) intel(0): Silken mouse enabled
[ 82.475] (II) intel(0): Initializing HW Cursor
[ 82.532] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 82.532] (**) intel(0): DPMS enabled
[ 82.532] (==) intel(0): Intel XvMC decoder enabled
[ 82.532] (II) intel(0): Set up textured video
[ 82.532] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 82.532] (II) intel(0): direct rendering: DRI2 Enabled
[ 82.532] (==) intel(0): hotplug detection: "enabled"
[ 82.532] (--) RandR disabled
[ 82.532] (II) Initializing built-in extension Generic Event Extension
[ 82.532] (II) Initializing built-in extension SHAPE
[ 82.532] (II) Initializing built-in extension MIT-SHM
[ 82.532] (II) Initializing built-in extension XInputExtension
[ 82.532] (II) Initializing built-in extension XTEST
[ 82.532] (II) Initializing built-in extension BIG-REQUESTS
[ 82.532] (II) Initializing built-in extension SYNC
[ 82.532] (II) Initializing built-in extension XKEYBOARD
[ 82.532] (II) Initializing built-in extension XC-MISC
[ 82.532] (II) Initializing built-in extension SECURITY
[ 82.532] (II) Initializing built-in extension XINERAMA
[ 82.532] (II) Initializing built-in extension XFIXES
[ 82.532] (II) Initializing built-in extension XFree86-Bigfont
[ 82.532] (II) Initializing built-in extension RENDER
[ 82.532] (II) Initializing built-in extension RANDR
[ 82.532] (II) Initializing built-in extension COMPOSITE
[ 82.532] (II) Initializing built-in extension DAMAGE
[ 82.650] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 82.650] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 82.650] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 82.650] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 82.650] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 82.650] (II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so
[ 82.650] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 82.651] (II) intel(0): Setting screen physical size to 508 x 285
[ 83.204] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 83.204] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 83.204] (II) LoadModule: "evdev"
[ 83.220] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 83.231] (II) Module evdev: vendor="X.Org Foundation"
[ 83.231] compiled for 1.10.2, module version = 2.6.0
[ 83.231] Module class: X.Org XInput Driver
[ 83.231] ABI class: X.Org XInput driver, version 12.2
[ 83.231] (II) Using input driver 'evdev' for 'Power Button'
[ 83.231] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 83.231] (**) Power Button: always reports core events
[ 83.231] (**) Power Button: Device: "/dev/input/event1"
[ 83.231] (--) Power Button: Found keys
[ 83.231] (II) Power Button: Configuring as keyboard
[ 83.231] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 83.231] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 83.231] (**) Option "xkb_rules" "evdev"
[ 83.231] (**) Option "xkb_model" "pc105"
[ 83.231] (**) Option "xkb_layout" "us,ru"
[ 83.231] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[ 83.265] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 83.265] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 83.265] (II) Using input driver 'evdev' for 'Video Bus'
[ 83.265] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 83.265] (**) Video Bus: always reports core events
[ 83.265] (**) Video Bus: Device: "/dev/input/event2"
[ 83.265] (--) Video Bus: Found keys
[ 83.265] (II) Video Bus: Configuring as keyboard
[ 83.265] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 83.265] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 83.265] (**) Option "xkb_rules" "evdev"
[ 83.265] (**) Option "xkb_model" "pc105"
[ 83.265] (**) Option "xkb_layout" "us,ru"
[ 83.265] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[ 83.267] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 83.267] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 83.267] (II) Using input driver 'evdev' for 'Power Button'
[ 83.267] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 83.267] (**) Power Button: always reports core events
[ 83.267] (**) Power Button: Device: "/dev/input/event0"
[ 83.267] (--) Power Button: Found keys
[ 83.267] (II) Power Button: Configuring as keyboard
[ 83.267] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 83.267] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 83.267] (**) Option "xkb_rules" "evdev"
[ 83.267] (**) Option "xkb_model" "pc105"
[ 83.267] (**) Option "xkb_layout" "us,ru"
[ 83.267] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[ 83.269] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 83.269] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 83.269] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 83.269] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 83.269] (**) Logitech USB Receiver: always reports core events
[ 83.269] (**) Logitech USB Receiver: Device: "/dev/input/event3"
[ 83.269] (--) Logitech USB Receiver: Found keys
[ 83.269] (II) Logitech USB Receiver: Configuring as keyboard
[ 83.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3/event3"
[ 83.269] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 83.269] (**) Option "xkb_rules" "evdev"
[ 83.269] (**) Option "xkb_model" "pc105"
[ 83.269] (**) Option "xkb_layout" "us,ru"
[ 83.269] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[ 83.269] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 83.269] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 83.269] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 83.269] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 83.269] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 83.269] (**) Logitech USB Receiver: always reports core events
[ 83.269] (**) Logitech USB Receiver: Device: "/dev/input/event4"
[ 83.269] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 83.269] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 83.269] (--) Logitech USB Receiver: Found relative axes
[ 83.269] (--) Logitech USB Receiver: Found x and y relative axes
[ 83.269] (--) Logitech USB Receiver: Found absolute axes
[ 83.269] (--) Logitech USB Receiver: Found keys
[ 83.269] (II) Logitech USB Receiver: Configuring as mouse
[ 83.269] (II) Logitech USB Receiver: Configuring as keyboard
[ 83.269] (II) Logitech USB Receiver: Adding scrollwheel support
[ 83.269] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 83.269] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 83.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4/event4"
[ 83.269] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 83.269] (**) Option "xkb_rules" "evdev"
[ 83.269] (**) Option "xkb_model" "pc105"
[ 83.269] (**) Option "xkb_layout" "us,ru"
[ 83.269] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"
[ 83.269] (II) Logitech USB Receiver: initialized for relative axes.
[ 83.269] (WW) Logitech USB Receiver: ignoring absolute axes.
[ 83.269] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 83.269] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 83.269] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 83.269] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 83.270] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 83.270] (II) No input driver/identifier specified (ignoring)
[ 83.270] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event6)
[ 83.270] (II) No input driver/identifier specified (ignoring)
[ 83.270] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 83.270] (II) No input driver/identifier specified (ignoring)
[ 83.273] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event8)
[ 83.273] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[ 83.273] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
[ 83.273] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 83.273] (**) A4Tech USB Mouse: always reports core events
[ 83.273] (**) A4Tech USB Mouse: Device: "/dev/input/event8"
[ 83.273] (--) A4Tech USB Mouse: Found 12 mouse buttons
[ 83.273] (--) A4Tech USB Mouse: Found scroll wheel(s)
[ 83.273] (--) A4Tech USB Mouse: Found relative axes
[ 83.273] (--) A4Tech USB Mouse: Found x and y relative axes
[ 83.273] (II) A4Tech USB Mouse: Configuring as mouse
[ 83.273] (II) A4Tech USB Mouse: Adding scrollwheel support
[ 83.273] (**) A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[ 83.273] (**) A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 83.273] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8/event8"
[ 83.273] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE)
[ 83.273] (II) A4Tech USB Mouse: initialized for relative axes.
[ 83.273] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[ 83.273] (**) A4Tech USB Mouse: (accel) acceleration profile 0
[ 83.273] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
[ 83.273] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
[ 83.273] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse1)
[ 83.273] (II) No input driver/identifier specified (ignoring)
[ 83.276] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
[ 83.276] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 83.276] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 83.276] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 83.276] (**) Eee PC WMI hotkeys: always reports core events
[ 83.276] (**) Eee PC WMI hotkeys: Device: "/dev/input/event5"
[ 83.276] (--) Eee PC WMI hotkeys: Found keys
[ 83.276] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 83.276] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input5/event5"
[ 83.276] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 83.276] (**) Option "xkb_rules" "evdev"
[ 83.276] (**) Option "xkb_model" "pc105"
[ 83.276] (**) Option "xkb_layout" "us,ru"
[ 83.276] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll,compose:rwin"

/media/linsys/ - это / установленной системы

22.04.2012 13:34 #247556

"awl" написал:
На всякий случай содержимое Xorg.0.log.old:

Там устройства ввода определились.

22.04.2012 13:53 #247561

awl написал:
[quote=yars]Может, дело в lock-файлах для устройств?

Можно поподробнее пожалуйста...
[/quote]
Точно не скажу, но обычно при работе с каким-либо устройством система создает файл *lock, который описывает, кем было занято устройство. При, например, отключении электричества, эти файлы не удаляются, и система начинает думать, что устройство занято.

24.04.2012 07:38 #247921

Пробовал загружаться в runlevel 1, затем из него в runlevel 3. Тут же получил глухое зависание.
Ещё в логах обнаружил вот такое:

text

Apr 21 17:37:10 awl kernel: [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
Apr 21 17:37:10 awl kernel: [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
Apr 21 17:37:10 awl kernel: [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 79335158 at 79335156, next 79335159)
Apr 21 17:37:21 awl kernel: [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
Apr 21 17:37:21 awl kernel: [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 79341624 at 79341621, next 79341625)
Apr 21 17:37:24 awl kernel: ------------[ cut here ]------------
Apr 21 17:37:24 awl kernel: kernel BUG at drivers/gpu/drm/i915/i915_gem.c:2031!

(это произошло во время первого зависания)
и такое:

text

Apr 22 17:38:22 awl kernel: pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000cdfff]

(это при попытке последующих загрузок в runlevel 5).

Может быть кто-нибудь сможет объяснить, что случилось?

24.04.2012 10:50 #247945

Проблемы с видеопамятью. Либо сдавайте в ремонт, либо меняйте видеокарту.

27.04.2012 17:44 #248564

Ха, наверно карточка Nvidia? Скорее всего отвалился чип - это либо в сервис какой-то нести и пересаживать чип, либо новую карточку. Хотя может (если обычная компьютерная видеокарта, а не бучная) - то действительно память. Если попадете к хорошему специалисту, который сможет вычислить отпавший чип видеопамяти - то 90% что карта оживет и будет жить долго и счастливо. Хотя я не знаю, что у вас там в России за специалисты.

27.04.2012 21:03 · отредактировано #248599

denitors написал:
Ха, наверно карточка Nvidia?

Нет, видео интеловское на борту. У меня мать asus p8z68-v pro, процессор i2500k. Я пробовал ставить дискретную карту nvidia, отключал встроенную intel, и при этом получал картину, совершенно аналогичную описанной выше. Думаю, что дело в каком-то сервисе, который при старте (в ранлевеле 3 или 5) подвешивает систему (а может быть только клавиатуру и мышь?). Как определить, что это за сервис пока не понимаю. Наверное можно по одному отключать и пробовать загружаться. Нашел какие сервисы запускаются в ранлевел 1, а вот как найти, какие в ранлевелах 3 и 5 не знаю.
Как я уже писал в посте #1, сейчас вынужден работать, загружаясь с liveusb Gentoo12.1. Пробовал несколько раз из генты воспроизвести ситуацию, описанную в первом посте. Не воспроизводится. И в логах никаких ошибок нет.
И последнее. Нашел вот такую инфу: https://bugzilla.redhat.com/show_bug.cgi?id=509519. Описание бага очень напоминает мой случай. Там вроде бы дело было в библиотеке mesa.

27.04.2012 21:09 #248600

Драйвера на видеокарту какие?

text

$ cat /var/log/dmesg

27.04.2012 21:38 #248602

модуль i915

text

dmesg

Показать

text

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.1.6-desktop-nrj.69mib (zerocool@SOLINFLAPTOP01) (gcc version 4.6.1 20110627 (Mandriva) (GCC) ) #1 SMP PREEMPT Thu Dec 22 03:23:09 CET 2011
Command line: BOOT_IMAGE=linux root=UUID=a219cac8-d706-41d8-b6dd-4d7ec844f0b1 resume=UUID=6d840811-2843-4835-9555-ec3f782faad6 splash=silent vga=788 1
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
 BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
 BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
 BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
 BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
 BIOS-e820: 0000000040200000 - 00000000ae5f5000 (usable)
 BIOS-e820: 00000000ae5f5000 - 00000000ae64c000 (ACPI NVS)
 BIOS-e820: 00000000ae64c000 - 00000000aeb5a000 (reserved)
 BIOS-e820: 00000000aeb5a000 - 00000000aeb5d000 (ACPI NVS)
 BIOS-e820: 00000000aeb5d000 - 00000000aeda3000 (reserved)
 BIOS-e820: 00000000aeda3000 - 00000000aedb4000 (ACPI NVS)
 BIOS-e820: 00000000aedb4000 - 00000000aedcb000 (reserved)
 BIOS-e820: 00000000aedcb000 - 00000000aedcd000 (usable)
 BIOS-e820: 00000000aedcd000 - 00000000aedd5000 (reserved)
 BIOS-e820: 00000000aedd5000 - 00000000aede0000 (ACPI NVS)
 BIOS-e820: 00000000aede0000 - 00000000aee3c000 (reserved)
 BIOS-e820: 00000000aee3c000 - 00000000aee7f000 (ACPI NVS)
 BIOS-e820: 00000000aee7f000 - 00000000af000000 (usable)
 BIOS-e820: 00000000af800000 - 00000000cfa00000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000022fe00000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: System manufacturer System Product Name/P8Z68-V PRO, BIOS 1101 11/23/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask FC0000000 write-back
  2 base 0AF800000 mask FFF800000 uncachable
  3 base 0B0000000 mask FF0000000 uncachable
  4 base 0C0000000 mask FC0000000 uncachable
  5 base 22FE00000 mask FFFE00000 uncachable
  6 base 230000000 mask FF0000000 uncachable
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000af800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xaf000 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fcea0] fcea0
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000098000] 98000 size 20480
init_memory_mapping: 0000000000000000-00000000af000000
 0000000000 - 00af000000 page 2M
kernel direct mapping tables up to af000000 @ 1fffc000-20000000
init_memory_mapping: 0000000100000000-000000022fe00000
 0100000000 - 022fe00000 page 2M
kernel direct mapping tables up to 22fe00000 @ aeff6000-af000000
RAMDISK: 1f82a000 - 1fff0000
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000ae641068 0004C (v01 ALASKA    A M I 01072009 AMI  00010013)
ACPI: FACP 00000000ae64b210 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
ACPI: DSDT 00000000ae641140 0A0CD (v02 ALASKA    A M I 00000000 INTL 20051117)
ACPI: FACS 00000000aedd7f80 00040
ACPI: APIC 00000000ae64b308 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
ACPI: SSDT 00000000ae64b380 00102 (v01 AMICPU     PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000ae64b488 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000ae64b4c8 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000022fe00000
Initmem setup node 0 0000000000000000-000000022fe00000
  NODE_DATA [000000022fdfb000 - 000000022fdfffff]
 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227c00000-ffff88022f3fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0022fe00
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x00020000
    0: 0x00020200 -> 0x00040000
    0: 0x00040200 -> 0x000ae5f5
    0: 0x000aedcb -> 0x000aedcd
    0: 0x000aee7f -> 0x000af000
    0: 0x00100000 -> 0x0022fe00
On node 0 totalpages: 1958149
  DMA zone: 64 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3912 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 693176 pages, LIFO batch:31
  Normal zone: 19448 pages used for memmap
  Normal zone: 1225224 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000ae5f5000 - 00000000ae64c000
PM: Registered nosave memory: 00000000ae64c000 - 00000000aeb5a000
PM: Registered nosave memory: 00000000aeb5a000 - 00000000aeb5d000
PM: Registered nosave memory: 00000000aeb5d000 - 00000000aeda3000
PM: Registered nosave memory: 00000000aeda3000 - 00000000aedb4000
PM: Registered nosave memory: 00000000aedb4000 - 00000000aedcb000
PM: Registered nosave memory: 00000000aedcd000 - 00000000aedd5000
PM: Registered nosave memory: 00000000aedd5000 - 00000000aede0000
PM: Registered nosave memory: 00000000aede0000 - 00000000aee3c000
PM: Registered nosave memory: 00000000aee3c000 - 00000000aee7f000
PM: Registered nosave memory: 00000000af000000 - 00000000af800000
PM: Registered nosave memory: 00000000af800000 - 00000000cfa00000
PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f31c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88022fa00000 s76224 r8192 d22080 u524288
pcpu-alloc: s76224 r8192 d22080 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1922312
Policy zone: Normal
Kernel command line: BOOT_IMAGE=linux root=UUID=a219cac8-d706-41d8-b6dd-4d7ec844f0b1 resume=UUID=6d840811-2843-4835-9555-ec3f782faad6 splash=silent vga=788 1
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7623800k/9172992k available (4269k kernel code, 1340396k absent, 208796k reserved, 5171k data, 728k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 62914560 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3399.237 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6798.47 BogoMIPS (lpj=3399237)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20110623
ftrace: allocating 16657 entries in 66 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
Booting Node   0, Processors  #1
smpboot cpu 1: start_ip = 98000
 #2
smpboot cpu 2: start_ip = 98000
 #3 Ok.
smpboot cpu 3: start_ip = 98000
Brought up 4 CPUs
Total of 4 processors activated (27194.17 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at ae5f5000 (356352 bytes)
PM: Registering ACPI NVS region at aeb5a000 (12288 bytes)
PM: Registering ACPI NVS region at aeda3000 (69632 bytes)
PM: Registering ACPI NVS region at aedd5000 (45056 bytes)
PM: Registering ACPI NVS region at aee3c000 (274432 bytes)
RTC time: 18:10:05, date: 04/27/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
ACPI: SSDT 00000000aedd6918 003E0 (v01    AMI      IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 003E0 (v01    AMI      IST 00000001 MSFT 03000001)
ACPI: SSDT 00000000aedd5d98 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xffffffff]
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cdfff])
pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [8086:0112] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xfbc29000-0xfbc2900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xfbc00000-0xfbc1ffff]
pci 0000:00:19.0: reg 14: [mem 0xfbc28000-0xfbc28fff]
pci 0000:00:19.0: reg 18: [io  0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xfbc27000-0xfbc273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xfbc20000-0xfbc23fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xfbc26000-0xfbc263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io  0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io  0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 24: [mem 0xfbc25000-0xfbc257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfbc24000-0xfbc240ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:03:00.0: reg 10: [mem 0xfbb00000-0xfbb07fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:05:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:05:00.0: reg 10: [mem 0xfba00000-0xfba07fff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:06:00.0: [1b21:1080] type 1 class 0x000604
pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.6:   bridge window [mem 0xcfa00000-0xffffffff] (subtractive decode)
pci 0000:07:01.0: [1102:0004] type 0 class 0x000401
pci 0000:07:01.0: reg 10: [io  0xe080-0xe0bf]
pci 0000:07:01.0: supports D1 D2
pci 0000:07:01.1: [1102:7003] type 0 class 0x000980
pci 0000:07:01.1: reg 10: [io  0xe0c0-0xe0c7]
pci 0000:07:01.1: supports D1 D2
pci 0000:07:01.2: [1102:4001] type 0 class 0x000c00
pci 0000:07:01.2: reg 10: [mem 0xfb905000-0xfb9057ff]
pci 0000:07:01.2: reg 14: [mem 0xfb900000-0xfb903fff]
pci 0000:07:01.2: supports D1 D2
pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot
pci 0000:07:01.2: PME# disabled
pci 0000:07:02.0: [1106:3044] type 0 class 0x000c00
pci 0000:07:02.0: reg 10: [mem 0xfb904000-0xfb9047ff]
pci 0000:07:02.0: reg 14: [io  0xe000-0xe07f]
pci 0000:07:02.0: supports D2
pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
pci 0000:07:02.0: PME# disabled
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:06:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:06:00.0:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:06:00.0:   bridge window [io  0xe000-0xefff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0xfb900000-0xfb9fffff] (subtractive decode)
pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:06:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:06:00.0:   bridge window [mem 0xcfa00000-0xffffffff] (subtractive decode)
pci 0000:08:00.0: [1b4b:9172] type 0 class 0x000106
pci 0000:08:00.0: reg 10: [io  0xd040-0xd047]
pci 0000:08:00.0: reg 14: [io  0xd030-0xd033]
pci 0000:08:00.0: reg 18: [io  0xd020-0xd027]
pci 0000:08:00.0: reg 1c: [io  0xd010-0xd013]
pci 0000:08:00.0: reg 20: [io  0xd000-0xd00f]
pci 0000:08:00.0: reg 24: [mem 0xfb810000-0xfb8101ff]
pci 0000:08:00.0: reg 30: [mem 0xfb800000-0xfb80ffff pref]
pci 0000:08:00.0: PME# supported from D3hot
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 08-08]
pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.7:   bridge window [mem 0xfb800000-0xfb8fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d400 - 000000000009ffff 
reserve RAM buffer: 00000000ae5f5000 - 00000000afffffff 
reserve RAM buffer: 00000000aedcd000 - 00000000afffffff 
reserve RAM buffer: 00000000af000000 - 00000000afffffff 
reserve RAM buffer: 000000022fe00000 - 000000022fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #2
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c8000-0x000dffff window]
pnp 00:00: [mem 0xcfa00000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed10000-0xfed19fff]
pnp 00:01: [mem 0xe0000000-0xe3ffffff]
pnp 00:01: [mem 0xfed90000-0xfed93fff]
pnp 00:01: [mem 0xfed20000-0xfed3ffff]
pnp 00:01: [mem 0xfee00000-0xfee0ffff]
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io  0x0290-0x029f]
pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0081-0x0083]
pnp 00:03: [io  0x0087]
pnp 00:03: [io  0x0089-0x008b]
pnp 00:03: [io  0x008f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x0010-0x001f]
pnp 00:06: [io  0x0022-0x003f]
pnp 00:06: [io  0x0044-0x005f]
pnp 00:06: [io  0x0063]
pnp 00:06: [io  0x0065]
pnp 00:06: [io  0x0067-0x006f]
pnp 00:06: [io  0x0072-0x007f]
pnp 00:06: [io  0x0080]
pnp 00:06: [io  0x0084-0x0086]
pnp 00:06: [io  0x0088]
pnp 00:06: [io  0x008c-0x008e]
pnp 00:06: [io  0x0090-0x009f]
pnp 00:06: [io  0x00a2-0x00bf]
pnp 00:06: [io  0x00e0-0x00ef]
pnp 00:06: [io  0x04d0-0x04d1]
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io  0x0400-0x0453]
pnp 00:08: [io  0x0458-0x047f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0500-0x057f]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfec00000-0xfecfffff]
pnp 00:08: [mem 0xfed08000-0xfed08fff]
pnp 00:08: [mem 0xff000000-0xffffffff]
system 00:08: [io  0x0400-0x0453] has been reserved
system 00:08: [io  0x0458-0x047f] has been reserved
system 00:08: [io  0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [io  0x0454-0x0457]
system 00:09: [io  0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:06:00.0:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06-07]
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1c.7: PCI bridge to [bus 08-08]
pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.7:   bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:06:00.0: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xffffffff]
pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0xcfa00000-0xffffffff]
pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:07: resource 4 [io  0xe000-0xefff]
pci_bus 0000:07: resource 5 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:07: resource 8 [io  0x0000-0x0cf7]
pci_bus 0000:07: resource 9 [io  0x0d00-0xffff]
pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 11 [mem 0xcfa00000-0xffffffff]
pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xfb800000-0xfb8fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7960k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800aa5f5000 - ffff8800ae5f5000
software IO TLB at phys 0xaa5f5000 - 0xae5f5000
audit: initializing netlink socket (disabled)
type=2000 audit(1335550205.708:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 14905
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
vesafb: cannot reserve video memory at 0xd0000000
vesafb: mode is 800x600x16, linelength=1600, pages=33
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005800000, using 1875k, total 524224k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Table is not found!
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 524288K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=6d840811-2843-4835-9555-ec3f782faad6
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
  Magic number: 8:542:191
acpi device:1d: hash matches
rtc_cmos 00:04: setting system clock to 2012-04-27 18:10:06 UTC (1335550206)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Freeing unused kernel memory: 728k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1856k freed
Freeing unused kernel memory: 72k freed
dracut: dracut-013-2
udevd[92]: starting version 168
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[drm] MTRR allocation failed.  Graphics performance may suffer.
i915 0000:00:02.0: irq 46 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
checking generic (d0000000 1fff0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Trying to free nonexistent resource <00000000d0000000-00000000effeffff>
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
Refined TSC clocksource calibration: 3399.621 MHz.
Switching to clocksource tsc
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
fixme: max PWM is zero.
acpi device:42: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
libata version 3.00 loaded.
firewire_ohci 0000:07:01.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfbc27000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbc26000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.1.6-desktop-nrj.69mib ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25100 irq 47
ata2: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25180 irq 47
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25280 irq 47
ata5: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25300 irq 47
ata6: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25380 irq 47
ahci 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:08:00.0: irq 48 for MSI/MSI-X
ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
ahci 0000:08:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfb810000 port 0xfb810100 irq 48
ata8: SATA max UDMA/133 abar m512@0xfb810000 port 0xfb810180 irq 48
firewire_ohci: Added fw-ohci device 0000:07:01.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
firewire_ohci 0000:07:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
firewire_ohci: Added fw-ohci device 0000:07:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
usb 1-1: new high speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA3MA, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: PIONEER DVD-RW  DVR-111D, 1.23, max UDMA/66
ata2.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-6: WDC WD740GD-00FLA0, 21.08U21, max UDMA/133
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata5.00: 145226112 sectors, multi 16: LBA48 
ata5.00: applying bridge limits
usb 2-1: new high speed USB device number 2 using ehci_hcd
firewire_core: created device fw0: GUID 00023c015108073a, S400
ata4.00: configured for UDMA/66
ata6.00: ATA-6: WDC WD740GD-00FLA1, 27.08D27, max UDMA/133
firewire_core: created device fw1: GUID 001fc6000012ae2f, S400
ata6.00: 145226112 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
ata5.00: configured for UDMA/100
ata6.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-111D 1.23 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 21.0 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access     ATA      WDC WD740GD-00FL 27.0 PQ: 0 ANSI: 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new full speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Receiver
usb 1-1.2: Manufacturer: Logitech
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdd] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdc] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
 sdd: sdd1
 sdc: sdc1
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 5:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sdc] Attached SCSI disk
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4
generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
 sda: sda1 sda2 < sda5 sda6 sda7 >
usb 2-1.2: new full speed USB device number 3 using ehci_hcd
usb 2-1.2: New USB device found, idVendor=051d, idProduct=0002
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: Back-UPS BR 900GI FW:879.L3 .I USB FW:L3  
usb 2-1.2: Manufacturer: American Power Conversion
usb 2-1.2: SerialNumber: 3B1129X25540  
generic-usb 0003:051D:0002.0004: hiddev0,hidraw3: USB HID v1.00 Device [American Power Conversion Back-UPS BR 900GI FW:879.L3 .I USB FW:L3  ] on usb-0000:00:1d.0-1.2/input0
usb 2-1.5: new low speed USB device number 4 using ehci_hcd
usb 2-1.5: New USB device found, idVendor=09da, idProduct=000a
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: USB Mouse
usb 2-1.5: Manufacturer: A4Tech
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1.7: new full speed USB device number 5 using ehci_hcd
usb 2-1.7: New USB device found, idVendor=0b05, idProduct=179c
usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 3:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
ata4.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 40/00:02:00:00:02/00:00:00:00:00/00 Emask 0x4 (timeout)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: both IDENTIFYs aborted, assuming NODEV
ata4.00: revalidation failed (errno=-2)
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: both IDENTIFYs aborted, assuming NODEV
ata4.00: revalidation failed (errno=-2)
ata4: hard resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: both IDENTIFYs aborted, assuming NODEV
ata4.00: revalidation failed (errno=-2)
ata4.00: disabled
ata4: EH complete
sr 3:0:0:0: ioctl_internal_command return code = 8000002
   : Sense Key : Aborted Command [current] [descriptor]
   : Add. Sense: No additional sense information
PM: Marking nosave pages: 000000000009d000 - 0000000000100000
PM: Marking nosave pages: 0000000020000000 - 0000000020200000
PM: Marking nosave pages: 0000000040000000 - 0000000040200000
PM: Marking nosave pages: 00000000ae5f5000 - 00000000aedcb000
PM: Marking nosave pages: 00000000aedcd000 - 00000000aee7f000
PM: Marking nosave pages: 00000000af000000 - 0000000100000000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
video LNXVIDEO:00: Restoring backlight state
PM: Starting manual resume from disk
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
dracut: Checking ext4: /dev/disk/by-uuid/a219cac8-d706-41d8-b6dd-4d7ec844f0b1
dracut: issuing e2fsck -a  /dev/disk/by-uuid/a219cac8-d706-41d8-b6dd-4d7ec844f0b1
dracut: linsys: clean, 275641/2564096 files, 3024345/10239886 blocks
dracut: Remounting /dev/disk/by-uuid/a219cac8-d706-41d8-b6dd-4d7ec844f0b1 with -o acl,relatime,ro
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
dracut: Mounted root filesystem /dev/sda6
dracut: Switching root
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: systemd 29 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +SYSVINIT +LIBCRYPTSETUP; mandriva)
NET: Registered protocol family 10
systemd[1]: Set hostname to <awl.myhost>.
systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
systemd-cryptsetup-generator[392]: Failed to open /etc/crypttab: Bad file descriptor
systemd[1]: /lib/systemd/system-generators/systemd-cryptsetup-generator exited with exit status 1.
systemd[1]: [/etc/rc.d/init.d/iptables:18] Failed to add LSB Provides name firewall.service, ignoring: File exists
systemd[1]: Path /sys/kernel/security is already a mount point, refusing start for sys-kernel-security.automount
EXT4-fs (sda6): re-mounted. Opts: acl
udevd[400]: starting version 168
wmi: Mapper loaded
iTCO_vendor_support: vendor-support=0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 3:0:0:0: Attached scsi generic sg2 type 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: Attached scsi generic sg4 type 0
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
mei 0000:00:16.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
xhci_hcd 0000:03:00.0: irq 17, io mem 0xfbb00000
xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.1.6-desktop-nrj.69mib xhci_hcd
usb usb3: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.1.6-desktop-nrj.69mib xhci_hcd
usb usb4: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:05:00.0: setting latency timer to 64
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:05:00.0: irq 16, io mem 0xfba00000
xhci_hcd 0000:05:00.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 55 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 56 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 57 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 58 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.1.6-desktop-nrj.69mib xhci_hcd
usb usb5: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.1.6-desktop-nrj.69mib xhci_hcd
usb usb6: SerialNumber: 0000:05:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
asus_wmi: ASUS WMI generic driver loaded
gameport gameport0: EMU10K1 is pci0000:07:01.1/gameport0, io 0xe0c0, speed 452kHz
snd_emu10k1 0000:07:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Backlight controlled by ACPI video driver
ACPI: acpi_idle yielding to intel_idle
mtp-probe[1097]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2"
mtp-probe[1098]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5"
mtp-probe[1100]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2"
mtp-probe[1100]: bus: 1, device: 3 was not an MTP device
mtp-probe[1098]: bus: 2, device: 4 was not an MTP device
mtp-probe[1097]: bus: 2, device: 3 was not an MTP device
ata_id[1421]: HDIO_GET_IDENTITY failed for '/dev/sr0'
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
a4tech 0003:09DA:000A.0005: input,hidraw4: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.5/input0
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f4:6d:04:49:b5:15
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 60 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Bluetooth: Generic Bluetooth USB driver ver 0.6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
padlock_aes: VIA PadLock not detected.
usbcore: registered new interface driver btusb
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
hda_codec: ALC892: BIOS auto-probing.
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x11/0x1e
   inputs: Rear Mic=0x18 Front Mic=0x19 Line=0x1a
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
systemd-fsck[1605]: /dev/sdb1: recovering journal
systemd-fsck[1634]: homefiles: recovering journal
systemd-fsck[1605]: /dev/sdb1: clean, 507163/30531584 files, 96852793/122096000 blocks
systemd-fsck[1634]: homefiles: clean, 71054/27402240 files, 74102503/109578538 blocks
systemd-fsck[1630]: boot: recovering journal
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
systemd-fsck[1630]: boot: clean, 74/57600 files, 57376/230320 blocks
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl

27.04.2012 21:57 · отредактировано #248603

"awl" написал:
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25

Конфликт видеодрайверов, похоже.

28.04.2012 01:35 · отредактировано #248622

awl написал:
Нет, видео интеловское на борту....

Тогда попробуй скачать memtest и запустить его. Если на третьем круге (на круге, а не на третьем тесте) посыпят ошибки - то надо чистить выводы оперативной памяти, скорее всего они окислились. Если не сыпет - пошевели память в слоте при запущеном тесте (пошевели, а не вытаскивай ее из слота - то есть в один и другой бок). Если зависнет тест - то нужно чистить выводы.

Чистится легко. Вытягиваешь планки оперативной памяти со слотов и легонько немажущей резинкой стираешь окислы. После этого вставь и выйми несколько раз память в слот. Потом снова тестом.

Также проверь винчестер Victoria или MHDD на предмет сбойных секторов. Посмотри питание на блоке питания - в норме ли при нагрузке.

Когда все исполнишь - тогда уже и будешь думать об софтовых проблемах.
Но сначала начни с оперативной памяти. Она очень часто окисляется и перестает контактировать в слоте, а так как у тебя интегрированное видео - то карта отрезает буфер памяти именно из оперативной памяти. А в линуксе ты видишь, что ошибки идут по видео, что тебя и обманывает.

P. S.
Иногда оперативная память хитро отпадает - то есть если memtest определил объем ниже установленного в системе или нет одной планки в списке тестируемых - то это тоже неконтакт памяти. Но в этом случае мемтест ошибок не выдаст - так как он не тестирует неконтактирующую память из-за того, что не считались данные из eeprom на планке.
Микросхема EEPRom тоже иногда умирает. Здесь я не могу дать рецепт.
А вот ОСь может включать другую карту памяти и видеть эту память, из-за чего собственно и зависает.

28.04.2012 07:47 · отредактировано #248634

А при установке дискретной карты в БИОСе нужно выставить параметр, отвечающий за то, какая карта будет определяться первой, называется она наподобие "INIT DISPLAY FIRST" и имеет значения, например, "PCI/PEG" и "PEG/PCI", а встроенное видео отключить (ON-BOARD VIDEO выставить в "DISABLED"). Смысл первого параметра - какую шину инициализировать первой. PEG - это PCI-Express Graphics.

28.04.2012 07:49 #248635

"denitors" написал:
Тогда попробуй скачать memtest

+1, можно его найти в SystemRescueCD.

28.04.2012 22:56 · отредактировано #248811

yars написал:
+1, можно его найти в SystemRescueCD.

Да можно бинарник скачать и если стоит grub - закинуть его в папку grub(а) и прописать в загрузку.
На lilo я никогда не прописывал - так что лучше ТС читать теорию.

Вроде еще есть в установочном диске Mandriva PWP 2010. При загрузке там есть соотвествующий пункт меню. А вот в PWP 2011 уже отсуствует.

28.04.2012 23:01 · отредактировано #248812

yars написал:
А при установке дискретной карты в БИОСе нужно выставить параметр, отвечающий за то, какая карта будет определяться первой, называется она наподобие "INIT DISPLAY FIRST" и имеет значения, например, "PCI/PEG" и "PEG/PCI", а встроенное видео отключить (ON-BOARD VIDEO выставить в "DISABLED"). Смысл первого параметра - какую шину инициализировать первой. PEG - это PCI-Express Graphics.

Да пускай он сначала железо проверит. То, что он описывает - явно неконтакт памяти. Либо пусть загрузится с какого-то lifeCD - если упадет при загрузке - точно память отходит в слоте.

Хотя он писал, что загрузился с lifeCD. Но я загружался удачно с lifeCD при отпавшем чипсете, когда весь дисплей полосило (там на материнской плате один мост только был). Так вот - убунта прогрузилась только на раз, и отлично работала. А вот виндовс уже извините - сразу в синий. Видимо вся проблема в том, что многие lifeCD пользуются самыми простыми драйверами и незадействуют специфичиских функций устройств.