Такая проблема: установил linux mandriva 2010.0 на свою машину. Первая загрузка оси проходит нормально, но потом комп наглухо виснет и не реагирует ни на что. Только принудительная перезагрузка reset'ом. Отключал ACPI, но результат тот же. В чем может быть причина? Вначале я грешил на модем 3G Huawei E1550, но и без него тоже самое.
Вот характеристика компа:
MOTHERBOARD: ASUS P4GD1
BIOS: AMI (06/08/05)
CPU: Intel Pentium 4, 3000 MHz (15 x 200)
RAM: 2048 Мб (PC3200 DDR SDRAM)
VIDEO: ATI Radeon X300/X550/X1050 Series Secondary (128 Мб)
HDD: ST3160815A (160 Гб, 7200 RPM, Ultra-ATA/100) (IDE)
DVD-ROM: Optiarc DVD RW AD-7203A SCSI CdRom Device (IDE)
Проблема аппаратная? Либо же программная?
Извините, если написал не в той теме.
LinuxForum.Fans
Зависает комп после загрузки linux mandriva 2010.0
Автор: 133_MHz
32 сообщений
11187 просмотров
Первая загрузка оси проходит нормально, но потом комп наглухо виснет и не реагирует ни на что.
загрузитесь с livecd и посмотрите логи. интересуют последние записи.
LiveCD Mandriva у меня к сожалению отсутствует. Загружал LiveCD Ubuntu 9.10 все работает.
Подключите модем через шнурок,хотяб метровый,без него у меня комп виснет.
LiveCD Mandriva у меня к сожалению отсутствует. Загружал LiveCD Ubuntu 9.10 все работает.
вот пока всё работает, вы бы и почитали что там в /var/log/ (не самой убунты, а корневого раздела недоустановленной Mandriva, /mnt/sdXY/var/log)
Тут много файлов. Какой нужно смотреть?
Тут много файлов. Какой нужно смотреть?
покажите список
[console]ls -l /var/log/[/console]
-rw-r--r-- 1 root root 14795 2011-04-11 11:49 auth.log
-rw-r--r-- 1 root root 210 2011-04-11 11:15 boot.log
-rw------- 1 root utmp 0 2011-04-10 18:17 btmp
drwxr-xr-x 2 root root 4096 2011-04-10 14:37 ConsoleKit/
drwxr-xr-x 2 root root 4096 2011-04-10 18:23 cron/
drwxr-xr-x 2 root root 4096 2011-04-10 18:23 daemons/
-rw-r--r-- 1 root root 28265 2011-04-11 11:12 dmesg
-rw-r--r-- 1 root root 28109 2011-04-11 09:39 dmesg.old
-rw-r--r-- 1 root root 0 2011-04-10 18:23 drakxtools.log
-rw------- 1 root root 24421 2011-04-11 11:52 explanations
-rw-r--r-- 1 root root 20581 2011-04-11 11:39 kdm.log
drwxr-xr-x 2 root root 4096 2011-04-10 18:23 kernel/
-rw-r--r-- 1 root root 2920584 2011-04-11 11:12 lastlog
drwxr-xr-x 2 root root 4096 2011-04-10 18:23 mail/
-rw-r--r-- 1 root root 609007 2011-04-11 11:52 messages
-rw-r--r-- 1 root root 315 2011-04-10 14:44 msec.log
-rw-r--r-- 1 root root 4101 2011-04-10 18:22 netprofile.log
-rw-r--r-- 1 root root 87 2011-04-11 11:12 pm-powersave.log
-rw------- 1 root root 0 2011-04-10 18:21 pm-suspend.log
drwx------ 2 root root 4096 2011-04-10 18:29 ppp/
-rw-r--r-- 1 root root 1724 2011-04-11 11:12 prcsys.log
-rw------- 1 root root 0 2011-04-10 14:49 preload.log
drwxr-xr-x 2 root root 4096 2009-10-01 20:41 samba/
drwxr-xr-x 2 root root 4096 2009-10-14 00:31 security/
-rw-r--r-- 1 root root 0 2011-04-10 18:31 security.log
-rw------- 1 root root 0 2011-04-10 18:29 sudo.log
-rw-r--r-- 1 root root 766036 2011-04-11 11:52 syslog
-rw------- 1 root root 0 2011-04-10 18:17 tallylog
-rw-r--r-- 1 root root 677509 2011-04-11 11:49 user.log
-rw-rw-r-- 1 root utmp 107520 2011-04-11 11:52 wtmp
-rw-r--r-- 1 root root 50623 2011-04-11 11:39 Xorg.0.log
-rw-r--r-- 1 root root 46335 2011-04-11 09:39
133 MHz,
[console]tail -n 33 var/log/messages
tail -n 33 var/log/syslog
cat var/log/boot.log[/console]
После первых двух команд пишет: стандартный ввод.
После последней три строки в которых сказывается на обновление файла /etc/resolv.conf
После первых двух команд пишет: стандартный ввод.
После последней три строки в которых сказывается на обновление файла /etc/resolv.conf
вы запускали команды в нужном каталоге? не ошиблись? может опечатка?
команда tail (хвост) показывает последние строчки файла. В данном случае 33 строчки. (-n 33)
и файл у вас такой есть - судя по вашему-же ls.
Я знаю, что должны высветиться последние строки, но ничего не показывает. Только вручную могу открыть эти файлы. Выложить эти файлы сюда?
Выложить эти файлы сюда?
не влезут. они в 10 раз длиннее лимита.
Могу написать последние строки с загрузок. И еще. Когда запуск идет в текстовом режиме, то там написано, что невозможно смонтировать какое-то устройство из-за его отсутствия
Могу написать последние строки с загрузок.
ага. в тегах {code}. (скобки квадратные)
невозможно смонтировать какое-то устройство из-за его отсутствия
хотелось-бы уточнить - какое...
messages
text
Apr 11 16:23:16 localhost syslogd 1.5.0: restart.
Apr 11 16:23:16 localhost klogd: klogd 1.5.0, log source = /proc/kmsg started.
Apr 11 16:23:16 localhost klogd: Linux version 2.6.31.5-desktop-1mnb (herton@n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Oct 23 01:46:54 EDT 2009
Apr 11 16:23:16 localhost klogd: KERNEL supported cpus:
Apr 11 16:23:16 localhost klogd: Intel GenuineIntel
Apr 11 16:23:16 localhost klogd: AMD AuthenticAMD
Apr 11 16:23:16 localhost klogd: NSC Geode by NSC
Apr 11 16:23:16 localhost klogd: Cyrix CyrixInstead
Apr 11 16:23:16 localhost klogd: Centaur CentaurHauls
Apr 11 16:23:16 localhost klogd: Transmeta GenuineTMx86
Apr 11 16:23:16 localhost klogd: Transmeta TransmetaCPU
Apr 11 16:23:16 localhost klogd: UMC UMC UMC UMC
Apr 11 16:23:16 localhost klogd: BIOS-provided physical RAM map:
Apr 11 16:23:16 localhost klogd: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Apr 11 16:23:16 localhost klogd: DMI 2.3 present.
Apr 11 16:23:16 localhost klogd: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Apr 11 16:23:16 localhost klogd: last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
Apr 11 16:23:16 localhost klogd: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Apr 11 16:23:16 localhost klogd: init_memory_mapping: 0000000000000000-00000000373fe000
Apr 11 16:23:16 localhost klogd: RAMDISK: 379fd000 - 37fef75b
Apr 11 16:23:16 localhost klogd: Allocated new RAMDISK: 00703000 - 00cf575b
Apr 11 16:23:16 localhost klogd: Move RAMDISK from 00000000379fd000 - 0000000037fef75a to 00703000 - 00cf575a
Apr 11 16:23:16 localhost klogd: ACPI: RSDP 000faef0 00024 (v02 ACPIAM)
Apr 11 16:23:16 localhost klogd: ACPI: XSDT 7ffb0100 00044 (v01 A M I OEMXSDT 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: FACP 7ffb0290 000F4 (v03 A M I OEMFACP 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: DSDT 7ffb0400 068A9 (v01 AH003 AH003001 00000001 INTL 02002026)
Apr 11 16:23:16 localhost klogd: ACPI: FACS 7ffbe000 00040
Apr 11 16:23:16 localhost klogd: ACPI: APIC 7ffb0390 00070 (v01 A M I OEMAPIC 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: OEMB 7ffbe040 00046 (v01 A M I AMI_OEM 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: MCFG 7ffb6cb0 0003C (v01 A M I OEMMCFG 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: 1163MB HIGHMEM available.
Apr 11 16:23:16 localhost klogd: 883MB LOWMEM available.
Apr 11 16:23:16 localhost klogd: mapped low ram: 0 - 373fe000
Apr 11 16:23:16 localhost klogd: low ram: 0 - 373fe000
Apr 11 16:23:16 localhost klogd: node 0 low ram: 00000000 - 373fe000
Apr 11 16:23:16 localhost klogd: node 0 bootmap 00012000 - 00018e80
Apr 11 16:23:16 localhost klogd: (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
Apr 11 16:23:16 localhost klogd: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Apr 11 16:23:16 localhost klogd: #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Apr 11 16:23:16 localhost klogd: #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Apr 11 16:23:16 localhost klogd: #3 [0000100000 - 00006feec4] TEXT DATA BSS ==> [0000100000 - 00006feec4]
Apr 11 16:23:16 localhost klogd: #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Apr 11 16:23:16 localhost klogd: #5 [00006ff000 - 0000702228] BRK ==> [00006ff000 - 0000702228]
Apr 11 16:23:16 localhost klogd: #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
Apr 11 16:23:16 localhost klogd: #7 [0000703000 - 0000cf575b] NEW RAMDISK ==> [0000703000 - 0000cf575b]
Apr 11 16:23:16 localhost klogd: #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Apr 11 16:23:16 localhost klogd: found SMP MP-table at [c00ff780] ff780
Apr 11 16:23:16 localhost klogd: Zone PFN ranges:
Apr 11 16:23:16 localhost klogd: DMA 0x00000010 -> 0x00001000
Apr 11 16:23:16 localhost klogd: Normal 0x00001000 -> 0x000373fe
Apr 11 16:23:16 localhost klogd: HighMem 0x000373fe -> 0x0007ffb0
Apr 11 16:23:16 localhost klogd: Movable zone start PFN for each node
Apr 11 16:23:16 localhost klogd: early_node_map[2] active PFN ranges
Apr 11 16:23:16 localhost klogd: 0: 0x00000010 -> 0x0000009f
Apr 11 16:23:16 localhost klogd: 0: 0x00000100 -> 0x0007ffb0
Apr 11 16:23:16 localhost klogd: Using APIC driver default
Apr 11 16:23:16 localhost klogd: ACPI: PM-Timer IO Port: 0x808
Apr 11 16:23:16 localhost klogd: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Apr 11 16:23:16 localhost klogd: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Apr 11 16:23:16 localhost klogd: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Apr 11 16:23:16 localhost klogd: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Apr 11 16:23:16 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 11 16:23:16 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 11 16:23:16 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 11 16:23:16 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 11 16:23:16 localhost klogd: Enabling APIC mode: Flat. Using 1 I/O APICs
Apr 11 16:23:16 localhost klogd: Using ACPI (MADT) for SMP configuration information
Apr 11 16:23:16 localhost klogd: SMP: Allowing 2 CPUs, 0 hotplug CPUs
Apr 11 16:23:16 localhost klogd: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Apr 11 16:23:16 localhost klogd: PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
Apr 11 16:23:16 localhost klogd: PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Apr 11 16:23:16 localhost klogd: Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000)
Apr 11 16:23:16 localhost klogd: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Apr 11 16:23:16 localhost klogd: PERCPU: Embedded 14 pages at c200a000, static data 35132 bytes
Apr 11 16:23:16 localhost klogd: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999
Apr 11 16:23:16 localhost klogd: Kernel command line: BOOT_IMAGE=linux root=UUID=73621fa7-65ce-4566-9848-8a3266448253 splash=silent vga=788
Apr 11 16:23:16 localhost klogd: PID hash table entries: 4096 (order: 12, 16384 bytes)
Apr 11 16:23:16 localhost klogd: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Apr 11 16:23:16 localhost klogd: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 11 16:23:16 localhost klogd: Enabling fast FPU save and restore... done.
Apr 11 16:23:16 localhost klogd: Enabling unmasked SIMD FPU exception support... done.
Apr 11 16:23:16 localhost klogd: Initializing CPU#0
Apr 11 16:23:16 localhost klogd: Initializing HighMem for node 0 (000373fe:0007ffb0)
Apr 11 16:23:16 localhost klogd: Memory: 2065848k/2096832k available (3086k kernel code, 29600k reserved, 1883k data, 436k init, 1191624k highmem)
Apr 11 16:23:16 localhost klogd: virtual kernel memory layout:
Apr 11 16:23:16 localhost klogd: fixmap : 0xffd55000 - 0xfffff000 (2728 kB)
Apr 11 16:23:16 localhost klogd: pkmap : 0xff400000 - 0xff800000 (4096 kB)
Apr 11 16:23:16 localhost klogd: vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
Apr 11 16:23:16 localhost klogd: lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
Apr 11 16:23:16 localhost klogd: .init : 0xc05db000 - 0xc0648000 ( 436 kB)
Apr 11 16:23:16 localhost klogd: .data : 0xc0403a96 - 0xc05da888 (1883 kB)
Apr 11 16:23:16 localhost klogd: .text : 0xc0100000 - 0xc0403a96 (3086 kB)
Apr 11 16:23:16 localhost klogd: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 11 16:23:16 localhost klogd: SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Apr 11 16:23:16 localhost klogd: NR_IRQS:1280
Apr 11 16:23:16 localhost klogd: Fast TSC calibration using PIT
Apr 11 16:23:16 localhost klogd: Detected 3010.657 MHz processor.
Apr 11 16:23:16 localhost klogd: Console: colour dummy device 80x25
Apr 11 16:23:16 localhost klogd: console [tty0] enabled
Apr 11 16:23:16 localhost klogd: Calibrating delay loop (skipped), value calculated using timer frequency.. 6021.31 BogoMIPS (lpj=3010657)
Apr 11 16:23:16 localhost klogd: Security Framework initialized
Apr 11 16:23:16 localhost klogd: TOMOYO Linux initialized
Apr 11 16:23:16 localhost klogd: Mount-cache hash table entries: 512
Apr 11 16:23:16 localhost klogd: CPU: Trace cache: 12K uops, L1 D cache: 16K
Apr 11 16:23:16 localhost klogd: CPU: L2 cache: 1024K
Apr 11 16:23:16 localhost klogd: CPU: Physical Processor ID: 0
Apr 11 16:23:16 localhost klogd: CPU: Processor Core ID: 0
Apr 11 16:23:16 localhost klogd: mce: CPU supports 4 MCE banks
Apr 11 16:23:16 localhost klogd: CPU0: Thermal monitoring enabled (TM1)
Apr 11 16:23:16 localhost klogd: using mwait in idle threads.
Apr 11 16:23:16 localhost klogd: Performance Counters: no PMU driver, software counters only.
Apr 11 16:23:16 localhost klogd: Checking 'hlt' instruction... OK.
Apr 11 16:23:16 localhost klogd: ACPI: Checking initramfs for custom DSDT
Apr 11 16:23:16 localhost klogd: ACPI: Core revision 20090521
Apr 11 16:23:16 localhost klogd: ftrace: converting mcount calls to 0f 1f 44 00 00
Apr 11 16:23:16 localhost klogd: ftrace: allocating 14182 entries in 28 pages
Apr 11 16:23:16 localhost klogd: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 11 16:23:16 localhost klogd: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Apr 11 16:23:16 localhost klogd: Booting processor 1 APIC 0x1 ip 0x6000
Apr 11 16:23:16 localhost klogd: Initializing CPU#1
Apr 11 16:23:16 localhost klogd: Calibrating delay using timer specific routine.. 6020.26 BogoMIPS (lpj=3010130)
Apr 11 16:23:16 localhost klogd: CPU: Trace cache: 12K uops, L1 D cache: 16K
Apr 11 16:23:16 localhost klogd: CPU: L2 cache: 1024K
Apr 11 16:23:16 localhost klogd: CPU: Physical Processor ID: 0
Apr 11 16:23:16 localhost klogd: CPU: Processor Core ID: 0
Apr 11 16:23:16 localhost klogd: mce: CPU supports 4 MCE banks
Apr 11 16:23:16 localhost klogd: CPU1: Thermal monitoring enabled (TM1)
Apr 11 16:23:16 localhost klogd: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Apr 11 16:23:16 localhost klogd: CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Apr 11 16:23:16 localhost klogd: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Apr 11 16:23:16 localhost klogd: Brought up 2 CPUs
Apr 11 16:23:16 localhost klogd: Total of 2 processors activated (12041.57 BogoMIPS).
Apr 11 16:23:16 localhost klogd: devtmpfs: initialized
Apr 11 16:23:16 localhost klogd: Booting paravirtualized kernel on bare hardware
Apr 11 16:23:16 localhost klogd: Time: 16:23:00 Date: 04/11/11
Apr 11 16:23:16 localhost klogd: NET: Registered protocol family 16
Apr 11 16:23:16 localhost klogd: ACPI: bus type pci registered
Apr 11 16:23:16 localhost klogd: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Apr 11 16:23:16 localhost klogd: PCI: Not using MMCONFIG.
Apr 11 16:23:16 localhost klogd: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
Apr 11 16:23:16 localhost klogd: PCI: Using configuration type 1 for base access
Apr 11 16:23:16 localhost klogd: bio: create slab <bio-0> at 0
Apr 11 16:23:16 localhost klogd: ACPI: Interpreter enabled
Apr 11 16:23:16 localhost klogd: ACPI: (supports S0 S1 S3 S4 S5)
Apr 11 16:23:16 localhost klogd: ACPI: Using IOAPIC for interrupt routing
Apr 11 16:23:16 localhost klogd: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Apr 11 16:23:16 localhost klogd: PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Apr 11 16:23:16 localhost klogd: PCI: Using MMCONFIG for extended config space
Apr 11 16:23:16 localhost klogd: ACPI Warning: Incorrect checksum in table [OEMB] - AE, should be 9F 20090521 tbutils-246
Apr 11 16:23:16 localhost klogd: ACPI: No dock devices found.
Apr 11 16:23:16 localhost klogd: ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:1b.0: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.7: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: PME# supported from D3hot
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: transparent bridge
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 16:23:16 localhost klogd: PCI: Using ACPI for IRQ routing
Apr 11 16:23:16 localhost klogd: NetLabel: Initializing
Apr 11 16:23:16 localhost klogd: NetLabel: domain hash size = 128
Apr 11 16:23:16 localhost klogd: NetLabel: protocols = UNLABELED CIPSOv4
Apr 11 16:23:16 localhost klogd: NetLabel: unlabeled traffic allowed by default
Apr 11 16:23:16 localhost klogd: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Apr 11 16:23:16 localhost klogd: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Apr 11 16:23:16 localhost klogd: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Apr 11 16:23:16 localhost klogd: pnp: PnP ACPI init
Apr 11 16:23:16 localhost klogd: ACPI: bus type pnp registered
Apr 11 16:23:16 localhost klogd: pnp: PnP ACPI: found 19 devices
Apr 11 16:23:16 localhost klogd: ACPI: ACPI bus type pnp unregistered
Apr 11 16:23:16 localhost klogd: PnPBIOS: Disabled
Apr 11 16:23:16 localhost klogd: system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:08: ioport range 0x290-0x297 has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: ioport range 0x4d0-0x4d1 has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: ioport range 0x800-0x87f has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: ioport range 0x400-0x41f has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: ioport range 0x480-0x4bf has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
Apr 11 16:23:16 localhost klogd: system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
Apr 11 16:23:16 localhost klogd: system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:11: iomem range 0xe0000000-0xefffffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:12: iomem range 0x0-0x9ffff could not be reserved
Apr 11 16:23:16 localhost klogd: system 00:12: iomem range 0xe0000-0xfffff could not be reserved
Apr 11 16:23:16 localhost klogd: system 00:12: iomem range 0x100000-0x7fffffff could not be reserved
Apr 11 16:23:16 localhost klogd: pci 0000:01:03.0: BAR 6: address space collision on of device [0xd7de0000-0xd7dfffff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: IO window: 0xe000-0xefff
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: MEM window: 0xd7f00000-0xd7ffffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: IO window: 0xd000-0xdfff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: MEM window: disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PREFETCH window: disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: IO window: 0xc000-0xcfff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: MEM window: 0xd7e00000-0xd7efffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PREFETCH window: disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: IO window: 0xb000-0xbfff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: MEM window: 0xd7d00000-0xd7dfffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 11 16:23:16 localhost klogd: NET: Registered protocol family 2
Apr 11 16:23:16 localhost klogd: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 11 16:23:16 localhost klogd: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 11 16:23:16 localhost klogd: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Apr 11 16:23:16 localhost klogd: TCP: Hash tables configured (established 131072 bind 65536)
Apr 11 16:23:16 localhost klogd: TCP reno registered
Apr 11 16:23:16 localhost klogd: NET: Registered protocol family 1
Apr 11 16:23:16 localhost klogd: Trying to unpack rootfs image as initramfs...
Apr 11 16:23:16 localhost klogd: Freeing initrd memory: 6089k freed
Apr 11 16:23:16 localhost klogd: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Apr 11 16:23:16 localhost klogd: apm: disabled - APM is not SMP safe.
Apr 11 16:23:16 localhost klogd: audit: initializing netlink socket (disabled)
Apr 11 16:23:16 localhost klogd: type=2000 audit(1302538979.483:1): initialized
Apr 11 16:23:16 localhost klogd: highmem bounce pool size: 64 pages
Apr 11 16:23:16 localhost klogd: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Apr 11 16:23:16 localhost klogd: VFS: Disk quotas dquot_6.5.2
Apr 11 16:23:16 localhost klogd: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 11 16:23:16 localhost klogd: msgmni has been set to 1721
Apr 11 16:23:16 localhost klogd: alg: No test for stdrng (krng)
Apr 11 16:23:16 localhost klogd: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Apr 11 16:23:16 localhost klogd: io scheduler noop registered
Apr 11 16:23:16 localhost klogd: io scheduler anticipatory registered
Apr 11 16:23:16 localhost klogd: io scheduler deadline registered
Apr 11 16:23:16 localhost klogd: io scheduler cfq registered (default)
Apr 11 16:23:16 localhost klogd: vesafb: framebuffer at 0xd8000000, mapped to 0xf7c80000, using 1875k, total 16384k
Apr 11 16:23:16 localhost klogd: vesafb: mode is 800x600x16, linelength=1600, pages=16
Apr 11 16:23:16 localhost klogd: vesafb: protected mode interface info at c000:58f8
Apr 11 16:23:16 localhost klogd: vesafb: pmi: set display start = c00c598c, set palette = c00c59d8
Apr 11 16:23:16 localhost klogd: vesafb: pmi: ports = e010 e016 e054 e038 e03c e05c e000 e004 e0b0 e0b2 e0b4
Apr 11 16:23:16 localhost klogd: vesafb: scrolling: redraw
Apr 11 16:23:16 localhost klogd: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Apr 11 16:23:16 localhost klogd: Console: switching to colour frame buffer device 100x37
Apr 11 16:23:16 localhost klogd: fb0: VESA VGA frame buffer device
Apr 11 16:23:16 localhost klogd: isapnp: Scanning for PnP cards...
Apr 11 16:23:16 localhost klogd: isapnp: No Plug & Play device found
Apr 11 16:23:16 localhost klogd: Linux agpgart interface v0.103
Apr 11 16:23:16 localhost klogd: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr 11 16:23:16 localhost klogd: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 11 16:23:16 localhost klogd: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr 11 16:23:16 localhost klogd: 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 11 16:23:16 localhost klogd: 00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr 11 16:23:16 localhost klogd: brd: module loaded
Apr 11 16:23:16 localhost klogd: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Apr 11 16:23:16 localhost klogd: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Apr 11 16:23:16 localhost klogd: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 11 16:23:16 localhost klogd: mice: PS/2 mouse device common for all mice
Apr 11 16:23:16 localhost klogd: rtc_cmos 00:03: RTC can wake from S4
Apr 11 16:23:16 localhost klogd: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Apr 11 16:23:16 localhost klogd: rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
Apr 11 16:23:16 localhost klogd: cpuidle: using governor ladder
Apr 11 16:23:16 localhost klogd: cpuidle: using governor menu
Apr 11 16:23:16 localhost klogd: TCP cubic registered
Apr 11 16:23:16 localhost klogd: Using IPI No-Shortcut mode
Apr 11 16:23:16 localhost klogd: registered taskstats version 1
Apr 11 16:23:16 localhost klogd: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Apr 11 16:23:16 localhost klogd: Magic number: 7:333:388
Apr 11 16:23:16 localhost klogd: rtc_cmos 00:03: setting system clock to 2011-04-11 16:23:01 UTC (1302538981)
Apr 11 16:23:16 localhost klogd: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Apr 11 16:23:16 localhost klogd: Freeing unused kernel memory: 436k freed
Apr 11 16:23:16 localhost klogd: usbcore: registered new interface driver usbfs
Apr 11 16:23:16 localhost klogd: usbcore: registered new interface driver hub
Apr 11 16:23:16 localhost klogd: usbcore: registered new device driver usb
Apr 11 16:23:16 localhost klogd: usbcore: registered new interface driver hiddev
Apr 11 16:23:16 localhost klogd: usbcore: registered new interface driver usbhid
Apr 11 16:23:16 localhost klogd: usbhid: v2.6:USB HID core driver
Apr 11 16:23:16 localhost klogd: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: debug port 1
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd7cffc00
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr 11 16:23:16 localhost klogd: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr 11 16:23:16 localhost klogd: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb1: Product: EHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb1: Manufacturer: Linux 2.6.31.5-desktop-1mnb ehci_hcd
Apr 11 16:23:16 localhost klogd: usb usb1: SerialNumber: 0000:00:1d.7
Apr 11 16:23:16 localhost klogd: usb usb1: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 1-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 1-0:1.0: 8 ports detected
Apr 11 16:23:16 localhost klogd: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Apr 11 16:23:16 localhost klogd: uhci_hcd: USB Universal Host Controller Interface driver
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880
Apr 11 16:23:16 localhost klogd: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Apr 11 16:23:16 localhost klogd: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb2: Product: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb2: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd
Apr 11 16:23:16 localhost klogd: usb usb2: SerialNumber: 0000:00:1d.0
Apr 11 16:23:16 localhost klogd: usb usb2: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 2-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 2-0:1.0: 2 ports detected
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00
Apr 11 16:23:16 localhost klogd: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Apr 11 16:23:16 localhost klogd: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb3: Product: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb3: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd
Apr 11 16:23:16 localhost klogd: usb usb3: SerialNumber: 0000:00:1d.1
Apr 11 16:23:16 localhost klogd: usb usb3: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 3-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 3-0:1.0: 2 ports detected
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000
Apr 11 16:23:16 localhost klogd: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr 11 16:23:16 localhost klogd: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb4: Product: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb4: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd
Apr 11 16:23:16 localhost klogd: usb usb4: SerialNumber: 0000:00:1d.2
Apr 11 16:23:16 localhost klogd: usb usb4: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 4-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 4-0:1.0: 2 ports detected
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a080
Apr 11 16:23:16 localhost klogd: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr 11 16:23:16 localhost klogd: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb5: Product: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb5: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd
Apr 11 16:23:16 localhost klogd: usb usb5: SerialNumber: 0000:00:1d.3
Apr 11 16:23:16 localhost klogd: usb usb5: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 5-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 5-0:1.0: 2 ports detected
Apr 11 16:23:16 localhost klogd: SCSI subsystem initialized
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Apr 11 16:23:16 localhost klogd: scsi0 : ata_piix
Apr 11 16:23:16 localhost klogd: scsi1 : ata_piix
Apr 11 16:23:16 localhost klogd: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Apr 11 16:23:16 localhost klogd: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Apr 11 16:23:16 localhost klogd: scsi2 : ata_piix
Apr 11 16:23:16 localhost klogd: scsi3 : ata_piix
Apr 11 16:23:16 localhost klogd: ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
Apr 11 16:23:16 localhost klogd: ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
Apr 11 16:23:16 localhost klogd: ata1.00: ATA-7: ST3160815A, 3.AAD, max UDMA/100
Apr 11 16:23:16 localhost klogd: ata1.00: 312581808 sectors, multi 16: LBA48
Apr 11 16:23:16 localhost klogd: usb 1-4: new high speed USB device using ehci_hcd and address 3
Apr 11 16:23:16 localhost klogd: ata1.00: configured for UDMA/100
Apr 11 16:23:16 localhost klogd: scsi 0:0:0:0: Direct-Access ATA ST3160815A 3.AA PQ: 0 ANSI: 5
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] Write Protect is off
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 11 16:23:16 localhost klogd: sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] Attached SCSI disk
Apr 11 16:23:16 localhost klogd: Uniform Multi-Platform E-IDE driver
Apr 11 16:23:16 localhost klogd: ide-gd driver 1.18
Apr 11 16:23:16 localhost klogd: it821x 0000:01:03.0: IDE controller (0x1283:0x8212 rev 0x13)
Apr 11 16:23:16 localhost klogd: ITE821x IDE 0000:01:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 11 16:23:16 localhost klogd: it821x 0000:01:03.0: controller in pass through mode
Apr 11 16:23:16 localhost klogd: it821x 0000:01:03.0: 100% native mode on irq 20
Apr 11 16:23:16 localhost klogd: ide0: BM-DMA at 0xb000-0xb007
Apr 11 16:23:16 localhost klogd: ide1: BM-DMA at 0xb008-0xb00f
Apr 11 16:23:16 localhost klogd: usb 1-4: New USB device found, idVendor=0ac8, idProduct=c40a
Apr 11 16:23:16 localhost klogd: usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 11 16:23:16 localhost klogd: usb 1-4: Product: A4 TECH USB2.0 PC Camera J
Apr 11 16:23:16 localhost klogd: usb 1-4: Manufacturer: A4 TECH
Apr 11 16:23:16 localhost klogd: usb 1-4: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: usb 1-5: new high speed USB device using ehci_hcd and address 4
Apr 11 16:23:16 localhost klogd: usb 1-5: New USB device found, idVendor=058f, idProduct=6362
Apr 11 16:23:16 localhost klogd: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 11 16:23:16 localhost klogd: usb 1-5: Product: Mass Storage Device
Apr 11 16:23:16 localhost klogd: usb 1-5: Manufacturer: Generic
Apr 11 16:23:16 localhost klogd: usb 1-5: SerialNumber: 058F312D81B
Apr 11 16:23:16 localhost klogd: usb 1-5: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: usb 2-1: new full speed USB device using uhci_hcd and address 2
Apr 11 16:23:16 localhost klogd: usb 2-1: New USB device found, idVendor=09da, idProduct=8090
Apr 11 16:23:16 localhost klogd: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 11 16:23:16 localhost klogd: usb 2-1: Product: USB Full Speed
Apr 11 16:23:16 localhost klogd: usb 2-1: Manufacturer: A4Tech
Apr 11 16:23:16 localhost klogd: usb 2-1: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
Apr 11 16:23:16 localhost klogd: generic-usb 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input0
Apr 11 16:23:16 localhost klogd: input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
Apr 11 16:23:16 localhost klogd: generic-usb 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input1
Apr 11 16:23:16 localhost klogd: hdb: Optiarc DVD RW AD-7203A, ATAPI CD/DVD-ROM drive
Apr 11 16:23:16 localhost klogd: hdb: UDMA/66 mode selected
Apr 11 16:23:16 localhost klogd: ide0 at 0xbc00-0xbc07,0xb482 on irq 20
Apr 11 16:23:16 localhost klogd: ide1 at 0xb400-0xb407,0xb082 on irq 20
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda6): barriers enabled
Apr 11 16:23:16 localhost klogd: kjournald2 starting: pid 74, dev sda6:8, commit interval 5 seconds
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda6): delayed allocation enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs: file extents enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs: mballoc enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda6): mounted filesystem with ordered data mode
Apr 11 16:23:16 localhost klogd: Tomoyo security MAC extension available but disabled by default. If you want to
Apr 11 16:23:16 localhost klogd: enable and use it, ccs-tools package must be installed.
Apr 11 16:23:16 localhost klogd: udev: starting version 146
Apr 11 16:23:16 localhost klogd: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Apr 11 16:23:16 localhost klogd: ACPI: Power Button [PWRF]
Apr 11 16:23:16 localhost klogd: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
Apr 11 16:23:16 localhost klogd: ACPI: Power Button [PWRB]
Apr 11 16:23:16 localhost klogd: processor LNXCPU:00: registered as cooling_device0
Apr 11 16:23:16 localhost klogd: ACPI: Processor [CPU0] (supports 8 throttling states)
Apr 11 16:23:16 localhost klogd: processor LNXCPU:01: registered as cooling_device1
Apr 11 16:23:16 localhost klogd: parport_pc 00:07: reported by Plug and Play ACPI
Apr 11 16:23:16 localhost klogd: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Apr 11 16:23:16 localhost klogd: Floppy drive(s): fd0 is 1.44M
Apr 11 16:23:16 localhost klogd: FDC 0 is a post-1991 82077
Apr 11 16:23:16 localhost klogd: ppdev: user-space parallel port driver
Apr 11 16:23:16 localhost klogd: dm1105 0000:01:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Apr 11 16:23:16 localhost klogd: DVB: registering new adapter (dm1105)
Apr 11 16:23:16 localhost klogd: dm1105 0000:01:0a.0: MAC 00:18:bd:5c:80:9e
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda6): internal journal on sda6:8
Apr 11 16:23:16 localhost klogd: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
Apr 11 16:23:16 localhost klogd: input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:1e.0/0000:01:0a.0/input/input5
Apr 11 16:23:16 localhost klogd: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda8): barriers enabled
Apr 11 16:23:16 localhost klogd: kjournald2 starting: pid 413, dev sda8:8, commit interval 5 seconds
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda8): internal journal on sda8:8
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda8): delayed allocation enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs: file extents enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs: mballoc enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda8): mounted filesystem with ordered data mode
Apr 11 16:23:16 localhost klogd: fuse init (API version 7.12)
Apr 11 16:23:16 localhost klogd: Adding 1172704k swap on /dev/sda7. Priority:-1 extents:1 across:1172704k
Apr 11 16:23:18 localhost acpid: client connected from 869[16:16]
Apr 11 16:23:18 localhost acpid: 1 client rule loaded
Apr 11 16:23:19 localhost acpid: client connected from 900[0:0]
Apr 11 16:23:19 localhost acpid: 1 client rule loaded
Apr 11 16:23:19 localhost klogd: pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:19 localhost klogd: [drm] Initialized drm 1.1.0 20060810
Apr 11 16:23:19 localhost klogd: sky2 driver version 1.23
Apr 11 16:23:19 localhost klogd: sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr 11 16:23:19 localhost klogd: sky2 0000:02:00.0: Yukon-2 EC chip revision 1
Apr 11 16:23:19 localhost klogd: sky2 eth0: addr 00:11:2f:f4:63:6b
Apr 11 16:23:19 localhost klogd: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr 11 16:23:19 localhost klogd: input: PC Speaker as /devices/platform/pcspkr/input/input6
Apr 11 16:23:20 localhost klogd: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 11 16:23:20 localhost klogd: ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
Apr 11 16:23:20 localhost klogd: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Apr 11 16:23:20 localhost klogd: ide-cd driver 5.00
Apr 11 16:23:20 localhost klogd: ide-cd: hdb: ATAPI 126X DVD-ROM DVD-R/RAM CD-R/RW drive, 1280kB Cache
Apr 11 16:23:20 localhost klogd: Uniform CD-ROM driver Revision: 3.20
Apr 11 16:23:20 localhost klogd: Initializing USB Mass Storage driver...
Apr 11 16:23:20 localhost klogd: scsi4 : SCSI emulation for USB Mass Storage devices
Apr 11 16:23:20 localhost klogd: usbcore: registered new interface driver usb-storage
Apr 11 16:23:20 localhost klogd: USB Mass Storage support registered.
Apr 11 16:23:20 localhost klogd: Linux video capture interface: v2.00
Apr 11 16:23:20 localhost klogd: uvcvideo: Found UVC 1.00 device A4 TECH USB2.0 PC Camera J (0ac8:c40a)
Apr 11 16:23:20 localhost klogd: input: A4 TECH USB2.0 PC Camera J as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
Apr 11 16:23:20 localhost klogd: usbcore: registered new interface driver uvcvideo
Apr 11 16:23:20 localhost klogd: USB Video Class driver (v0.1.0)
Apr 11 16:23:20 localhost klogd: iTCO_vendor_support: vendor-support=0
Apr 11 16:23:20 localhost klogd: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Apr 11 16:23:20 localhost klogd: iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
Apr 11 16:23:20 localhost klogd: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
Apr 11 16:23:20 localhost klogd: intel_rng: FWH not detected
Apr 11 16:23:20 localhost klogd: [drm] Initialized radeon 1.31.0 20080528 for 0000:04:00.0 on minor 0
Apr 11 16:23:20 localhost klogd: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:20 localhost klogd: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
Apr 11 16:23:20 localhost klogd: [drm] Setting GART location based on new memory map
Apr 11 16:23:20 localhost klogd: [drm] Loading R300 Microcode
Apr 11 16:23:20 localhost klogd: [drm] Num pipes: 1
Apr 11 16:23:20 localhost klogd: [drm] writeback test succeeded in 1 usecs
Apr 11 16:23:23 localhost klogd: imwheel[1159]: segfault at 118 ip 0804c932 sp bfe7d4a0 error 4 in imwheel[8048000+e000]
Apr 11 16:23:25 localhost klogd: scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:0: Attached scsi generic sg1 type 0
Apr 11 16:23:25 localhost klogd: scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:1: Attached scsi generic sg2 type 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:0: [sdb] Attached SCSI removable disk
Apr 11 16:23:25 localhost klogd: scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:2: Attached scsi generic sg3 type 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:1: [sdc] Attached SCSI removable disk
Apr 11 16:23:25 localhost klogd: scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:3: Attached scsi generic sg4 type 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:2: [sdd] Attached SCSI removable disk
Apr 11 16:23:25 localhost klogd: sd 4:0:0:3: [sde] Attached SCSI removable disk
Apr 11 16:23:26 localhost service_harddrake[1290]: ### Program is starting ###
Apr 11 16:23:28 localhost service_harddrake[1290]: running: dmidecode
Apr 11 16:23:28 localhost service_harddrake[1290]: modified file /etc/sysconfig/harddrake2/kernel
Apr 11 16:23:28 localhost service_harddrake[1290]: modified file /etc/sysconfig/harddrake2/xorg
Apr 11 16:23:28 localhost service_harddrake[1290]: created file /etc/sysconfig/harddrake2/previous_hw
Apr 11 16:23:28 localhost init: Entering runlevel: 5
Apr 11 16:23:29 localhost crond[1597]: (CRON) STARTUP (1.4.1)
Apr 11 16:23:29 localhost crond[1597]: (CRON) INFO (running with inotify support)
Apr 11 16:23:30 localhost klogd: NET: Registered protocol family 10
Apr 11 16:23:30 localhost klogd: lo: Disabled Privacy Extensions
Apr 11 16:23:30 localhost klogd: usbcore: registered new interface driver snd-usb-audio
Apr 11 16:23:32 localhost avahi-daemon[1928]: Found user 'avahi' (UID 17) and group 'avahi' (GID 17).
Apr 11 16:23:32 localhost avahi-daemon[1928]: Successfully dropped root privileges.
Apr 11 16:23:32 localhost avahi-daemon[1928]: avahi-daemon 0.6.25 starting up.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Successfully called chroot().
Apr 11 16:23:32 localhost avahi-daemon[1928]: Successfully dropped remaining capabilities.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Loading service file /services/sftp-ssh.service.
Apr 11 16:23:32 localhost avahi-daemon[1928]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Network interface enumeration completed.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Registering HINFO record with values 'I686'/'LINUX'.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Server startup complete. Host name is linux.local. Local service cookie is 1995670916.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Service "SFTP File Transfer on linux" (/services/sftp-ssh.service) successfully established.
Apr 11 16:23:32 localhost xinetd[1944]: xinetd Version 2.3.14 started with libwrap options compiled in.
Apr 11 16:23:32 localhost xinetd[1944]: Started working: 0 available services
Apr 11 16:23:33 localhost klogd: ondemand governor failed, too long transition latency of HW, fallback to performance governor
Apr 11 16:23:33 localhost klogd: ip_tables: (C) 2000-2006 Netfilter Core Team
Apr 11 16:23:34 localhost smbd[2038]: [2011/04/11 16:23:34, 0] printing/print_cups.c:103(cups_connect)
Apr 11 16:23:34 localhost smbd[2038]: Unable to connect to CUPS server localhost:631 - В соединении отказано
Apr 11 16:23:34 localhost smbd[2047]: [2011/04/11 16:23:34, 0] printing/print_cups.c:103(cups_connect)
Apr 11 16:23:34 localhost smbd[2047]: Unable to connect to CUPS server localhost:631 - В соединении отказано
Apr 11 16:23:34 localhost nmbd[2089]: [2011/04/11 16:23:34, 0] nmbd/nmbd_subnetdb.c:206(create_subnets)
Apr 11 16:23:34 localhost nmbd[2089]: create_subnets: No local IPv4 non-loopback interfaces !
Apr 11 16:23:34 localhost nmbd[2089]: [2011/04/11 16:23:34, 0] nmbd/nmbd_subnetdb.c:207(create_subnets)
Apr 11 16:23:34 localhost nmbd[2089]: create_subnets: Waiting for an interface to appear ...
Apr 11 16:23:35 localhost smbd[2063]: [2011/04/11 16:23:35, 0] smbd/server.c:457(smbd_open_one_socket)
Apr 11 16:23:35 localhost smbd[2063]: smbd_open_once_socket: open_socket_in: Адрес уже используется
Apr 11 16:23:35 localhost smbd[2063]: [2011/04/11 16:23:35, 0] smbd/server.c:457(smbd_open_one_socket)
Apr 11 16:23:35 localhost smbd[2063]: smbd_open_once_socket: open_socket_in: Адрес уже используется
Apr 11 16:23:35 localhost klogd: Netfilter messages via NETLINK v0.30.
Apr 11 16:23:36 localhost klogd: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Apr 11 16:23:36 localhost klogd: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Apr 11 16:23:36 localhost klogd: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Apr 11 16:23:36 localhost klogd: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Apr 11 16:23:37 localhost klogd: ctnetlink v0.93: registering with nfnetlink.
Apr 11 16:23:37 localhost klogd: ClusterIP Version 0.8 loaded successfully
Apr 11 16:23:39 localhost klogd: xt_time: kernel timezone is +0400
Apr 11 16:23:41 localhost klogd: netfilter PSD loaded - (c) astaro AG
Apr 11 16:23:41 localhost klogd: IFWLOG: register target
Apr 11 16:23:41 localhost logger: Shorewall started
Apr 11 16:23:48 localhost mdkapplet[2556]: ### Program is starting ###
Apr 11 16:23:48 localhost net_applet[2567]: ### Program is starting ###
Apr 11 16:23:49 localhost draksnapshot-applet[2569]: ### Program is starting ###
Apr 11 16:23:49 localhost rtkit-daemon[2559]: Sucessfully made thread 2557 of process 2557 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -11.
Apr 11 16:23:50 localhost rtkit-daemon[2559]: Sucessfully made thread 2575 of process 2557 (/usr/bin/pulseaudio) owned by '10001' RT at priority 5.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Sucessfully made thread 2577 of process 2557 (/usr/bin/pulseaudio) owned by '10001' RT at priority 5.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Sucessfully made thread 2579 of process 2557 (/usr/bin/pulseaudio) owned by '10001' RT at priority 5.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Sucessfully made thread 2615 of process 2615 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -11.
Apr 11 16:23:51 localhost pulseaudio[2615]: pid.c: Daemon already running.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Sucessfully made thread 2617 of process 2617 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -11.
Apr 11 16:23:52 localhost pulseaudio[2617]: pid.c: Daemon already running.
Apr 11 16:23:55 localhost draksnapshot-applet[2569]: running: ionice -p 2569 -n7
Apr 11 16:23:55 localhost mdkapplet[2556]: ### Program is exiting ###
syslog
text
Apr 11 16:23:16 localhost syslogd 1.5.0: restart.
Apr 11 16:23:16 localhost klogd: klogd 1.5.0, log source = /proc/kmsg started.
Apr 11 16:23:16 localhost klogd: Linux version 2.6.31.5-desktop-1mnb (herton@n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Oct 23 01:46:54 EDT 2009
Apr 11 16:23:16 localhost klogd: KERNEL supported cpus:
Apr 11 16:23:16 localhost klogd: Intel GenuineIntel
Apr 11 16:23:16 localhost klogd: AMD AuthenticAMD
Apr 11 16:23:16 localhost klogd: NSC Geode by NSC
Apr 11 16:23:16 localhost klogd: Cyrix CyrixInstead
Apr 11 16:23:16 localhost klogd: Centaur CentaurHauls
Apr 11 16:23:16 localhost klogd: Transmeta GenuineTMx86
Apr 11 16:23:16 localhost klogd: Transmeta TransmetaCPU
Apr 11 16:23:16 localhost klogd: UMC UMC UMC UMC
Apr 11 16:23:16 localhost klogd: BIOS-provided physical RAM map:
Apr 11 16:23:16 localhost klogd: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 000000007ffbe000 - 000000007fff0000 (ACPI NVS)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
Apr 11 16:23:16 localhost klogd: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Apr 11 16:23:16 localhost klogd: DMI 2.3 present.
Apr 11 16:23:16 localhost klogd: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Apr 11 16:23:16 localhost klogd: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Apr 11 16:23:16 localhost klogd: last_pfn = 0x7ffb0 max_arch_pfn = 0x100000
Apr 11 16:23:16 localhost klogd: MTRR default type: uncachable
Apr 11 16:23:16 localhost klogd: MTRR fixed ranges enabled:
Apr 11 16:23:16 localhost klogd: 00000-9FFFF write-back
Apr 11 16:23:16 localhost klogd: A0000-DFFFF uncachable
Apr 11 16:23:16 localhost klogd: E0000-EFFFF write-through
Apr 11 16:23:16 localhost klogd: F0000-FFFFF write-protect
Apr 11 16:23:16 localhost klogd: MTRR variable ranges enabled:
Apr 11 16:23:16 localhost klogd: 0 base 000000000 mask F80000000 write-back
Apr 11 16:23:16 localhost klogd: 1 disabled
Apr 11 16:23:16 localhost klogd: 2 disabled
Apr 11 16:23:16 localhost klogd: 3 disabled
Apr 11 16:23:16 localhost klogd: 4 disabled
Apr 11 16:23:16 localhost klogd: 5 disabled
Apr 11 16:23:16 localhost klogd: 6 disabled
Apr 11 16:23:16 localhost klogd: 7 disabled
Apr 11 16:23:16 localhost klogd: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Apr 11 16:23:16 localhost klogd: initial memory mapped : 0 - 00c00000
Apr 11 16:23:16 localhost klogd: init_memory_mapping: 0000000000000000-00000000373fe000
Apr 11 16:23:16 localhost klogd: 0000000000 - 0000400000 page 4k
Apr 11 16:23:16 localhost klogd: 0000400000 - 0037000000 page 2M
Apr 11 16:23:16 localhost klogd: 0037000000 - 00373fe000 page 4k
Apr 11 16:23:16 localhost klogd: kernel direct mapping tables up to 373fe000 @ 10000-16000
Apr 11 16:23:16 localhost klogd: RAMDISK: 379fd000 - 37fef75b
Apr 11 16:23:16 localhost klogd: Allocated new RAMDISK: 00703000 - 00cf575b
Apr 11 16:23:16 localhost klogd: Move RAMDISK from 00000000379fd000 - 0000000037fef75a to 00703000 - 00cf575a
Apr 11 16:23:16 localhost klogd: ACPI: RSDP 000faef0 00024 (v02 ACPIAM)
Apr 11 16:23:16 localhost klogd: ACPI: XSDT 7ffb0100 00044 (v01 A M I OEMXSDT 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: FACP 7ffb0290 000F4 (v03 A M I OEMFACP 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: DSDT 7ffb0400 068A9 (v01 AH003 AH003001 00000001 INTL 02002026)
Apr 11 16:23:16 localhost klogd: ACPI: FACS 7ffbe000 00040
Apr 11 16:23:16 localhost klogd: ACPI: APIC 7ffb0390 00070 (v01 A M I OEMAPIC 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: OEMB 7ffbe040 00046 (v01 A M I AMI_OEM 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: MCFG 7ffb6cb0 0003C (v01 A M I OEMMCFG 06000508 MSFT 00000097)
Apr 11 16:23:16 localhost klogd: ACPI: Local APIC address 0xfee00000
Apr 11 16:23:16 localhost klogd: 1163MB HIGHMEM available.
Apr 11 16:23:16 localhost klogd: 883MB LOWMEM available.
Apr 11 16:23:16 localhost klogd: mapped low ram: 0 - 373fe000
Apr 11 16:23:16 localhost klogd: low ram: 0 - 373fe000
Apr 11 16:23:16 localhost klogd: node 0 low ram: 00000000 - 373fe000
Apr 11 16:23:16 localhost klogd: node 0 bootmap 00012000 - 00018e80
Apr 11 16:23:16 localhost klogd: (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
Apr 11 16:23:16 localhost klogd: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Apr 11 16:23:16 localhost klogd: #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
Apr 11 16:23:16 localhost klogd: #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
Apr 11 16:23:16 localhost klogd: #3 [0000100000 - 00006feec4] TEXT DATA BSS ==> [0000100000 - 00006feec4]
Apr 11 16:23:16 localhost klogd: #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Apr 11 16:23:16 localhost klogd: #5 [00006ff000 - 0000702228] BRK ==> [00006ff000 - 0000702228]
Apr 11 16:23:16 localhost klogd: #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
Apr 11 16:23:16 localhost klogd: #7 [0000703000 - 0000cf575b] NEW RAMDISK ==> [0000703000 - 0000cf575b]
Apr 11 16:23:16 localhost klogd: #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Apr 11 16:23:16 localhost klogd: found SMP MP-table at [c00ff780] ff780
Apr 11 16:23:16 localhost klogd: Zone PFN ranges:
Apr 11 16:23:16 localhost klogd: DMA 0x00000010 -> 0x00001000
Apr 11 16:23:16 localhost klogd: Normal 0x00001000 -> 0x000373fe
Apr 11 16:23:16 localhost klogd: HighMem 0x000373fe -> 0x0007ffb0
Apr 11 16:23:16 localhost klogd: Movable zone start PFN for each node
Apr 11 16:23:16 localhost klogd: early_node_map[2] active PFN ranges
Apr 11 16:23:16 localhost klogd: 0: 0x00000010 -> 0x0000009f
Apr 11 16:23:16 localhost klogd: 0: 0x00000100 -> 0x0007ffb0
Apr 11 16:23:16 localhost klogd: On node 0 totalpages: 524095
Apr 11 16:23:16 localhost klogd: free_area_init_node: node 0, pgdat c05cdee0, node_mem_map c1000200
Apr 11 16:23:16 localhost klogd: DMA zone: 32 pages used for memmap
Apr 11 16:23:16 localhost klogd: DMA zone: 0 pages reserved
Apr 11 16:23:16 localhost klogd: DMA zone: 3951 pages, LIFO batch:0
Apr 11 16:23:16 localhost klogd: Normal zone: 1736 pages used for memmap
Apr 11 16:23:16 localhost klogd: Normal zone: 220470 pages, LIFO batch:31
Apr 11 16:23:16 localhost klogd: HighMem zone: 2328 pages used for memmap
Apr 11 16:23:16 localhost klogd: HighMem zone: 295578 pages, LIFO batch:31
Apr 11 16:23:16 localhost klogd: Using APIC driver default
Apr 11 16:23:16 localhost klogd: ACPI: PM-Timer IO Port: 0x808
Apr 11 16:23:16 localhost klogd: ACPI: Local APIC address 0xfee00000
Apr 11 16:23:16 localhost klogd: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Apr 11 16:23:16 localhost klogd: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Apr 11 16:23:16 localhost klogd: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Apr 11 16:23:16 localhost klogd: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Apr 11 16:23:16 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 11 16:23:16 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 11 16:23:16 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 11 16:23:16 localhost klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 11 16:23:16 localhost klogd: ACPI: IRQ0 used by override.
Apr 11 16:23:16 localhost klogd: ACPI: IRQ2 used by override.
Apr 11 16:23:16 localhost klogd: ACPI: IRQ9 used by override.
Apr 11 16:23:16 localhost klogd: Enabling APIC mode: Flat. Using 1 I/O APICs
Apr 11 16:23:16 localhost klogd: Using ACPI (MADT) for SMP configuration information
Apr 11 16:23:16 localhost klogd: SMP: Allowing 2 CPUs, 0 hotplug CPUs
Apr 11 16:23:16 localhost klogd: nr_irqs_gsi: 24
Apr 11 16:23:16 localhost klogd: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Apr 11 16:23:16 localhost klogd: PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
Apr 11 16:23:16 localhost klogd: PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Apr 11 16:23:16 localhost klogd: Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000)
Apr 11 16:23:16 localhost klogd: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
Apr 11 16:23:16 localhost klogd: PERCPU: Embedded 14 pages at c200a000, static data 35132 bytes
Apr 11 16:23:16 localhost klogd: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999
Apr 11 16:23:16 localhost klogd: Kernel command line: BOOT_IMAGE=linux root=UUID=73621fa7-65ce-4566-9848-8a3266448253 splash=silent vga=788
Apr 11 16:23:16 localhost klogd: PID hash table entries: 4096 (order: 12, 16384 bytes)
Apr 11 16:23:16 localhost klogd: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Apr 11 16:23:16 localhost klogd: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 11 16:23:16 localhost klogd: Enabling fast FPU save and restore... done.
Apr 11 16:23:16 localhost klogd: Enabling unmasked SIMD FPU exception support... done.
Apr 11 16:23:16 localhost klogd: Initializing CPU#0
Apr 11 16:23:16 localhost klogd: Initializing HighMem for node 0 (000373fe:0007ffb0)
Apr 11 16:23:16 localhost klogd: Memory: 2065848k/2096832k available (3086k kernel code, 29600k reserved, 1883k data, 436k init, 1191624k highmem)
Apr 11 16:23:16 localhost klogd: virtual kernel memory layout:
Apr 11 16:23:16 localhost klogd: fixmap : 0xffd55000 - 0xfffff000 (2728 kB)
Apr 11 16:23:16 localhost klogd: pkmap : 0xff400000 - 0xff800000 (4096 kB)
Apr 11 16:23:16 localhost klogd: vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
Apr 11 16:23:16 localhost klogd: lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
Apr 11 16:23:16 localhost klogd: .init : 0xc05db000 - 0xc0648000 ( 436 kB)
Apr 11 16:23:16 localhost klogd: .data : 0xc0403a96 - 0xc05da888 (1883 kB)
Apr 11 16:23:16 localhost klogd: .text : 0xc0100000 - 0xc0403a96 (3086 kB)
Apr 11 16:23:16 localhost klogd: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 11 16:23:16 localhost klogd: SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Apr 11 16:23:16 localhost klogd: NR_IRQS:1280
Apr 11 16:23:16 localhost klogd: Fast TSC calibration using PIT
Apr 11 16:23:16 localhost klogd: Detected 3010.657 MHz processor.
Apr 11 16:23:16 localhost klogd: Console: colour dummy device 80x25
Apr 11 16:23:16 localhost klogd: console [tty0] enabled
Apr 11 16:23:16 localhost klogd: Calibrating delay loop (skipped), value calculated using timer frequency.. 6021.31 BogoMIPS (lpj=3010657)
Apr 11 16:23:16 localhost klogd: Security Framework initialized
Apr 11 16:23:16 localhost klogd: TOMOYO Linux initialized
Apr 11 16:23:16 localhost klogd: Mount-cache hash table entries: 512
Apr 11 16:23:16 localhost klogd: CPU: Trace cache: 12K uops, L1 D cache: 16K
Apr 11 16:23:16 localhost klogd: CPU: L2 cache: 1024K
Apr 11 16:23:16 localhost klogd: CPU: Physical Processor ID: 0
Apr 11 16:23:16 localhost klogd: CPU: Processor Core ID: 0
Apr 11 16:23:16 localhost klogd: mce: CPU supports 4 MCE banks
Apr 11 16:23:16 localhost klogd: CPU0: Thermal monitoring enabled (TM1)
Apr 11 16:23:16 localhost klogd: using mwait in idle threads.
Apr 11 16:23:16 localhost klogd: Performance Counters: no PMU driver, software counters only.
Apr 11 16:23:16 localhost klogd: Checking 'hlt' instruction... OK.
Apr 11 16:23:16 localhost klogd: ACPI: Checking initramfs for custom DSDT
Apr 11 16:23:16 localhost klogd: ACPI: Core revision 20090521
Apr 11 16:23:16 localhost klogd: ftrace: converting mcount calls to 0f 1f 44 00 00
Apr 11 16:23:16 localhost klogd: ftrace: allocating 14182 entries in 28 pages
Apr 11 16:23:16 localhost klogd: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 11 16:23:16 localhost klogd: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Apr 11 16:23:16 localhost klogd: Booting processor 1 APIC 0x1 ip 0x6000
Apr 11 16:23:16 localhost klogd: Initializing CPU#1
Apr 11 16:23:16 localhost klogd: Calibrating delay using timer specific routine.. 6020.26 BogoMIPS (lpj=3010130)
Apr 11 16:23:16 localhost klogd: CPU: Trace cache: 12K uops, L1 D cache: 16K
Apr 11 16:23:16 localhost klogd: CPU: L2 cache: 1024K
Apr 11 16:23:16 localhost klogd: CPU: Physical Processor ID: 0
Apr 11 16:23:16 localhost klogd: CPU: Processor Core ID: 0
Apr 11 16:23:16 localhost klogd: mce: CPU supports 4 MCE banks
Apr 11 16:23:16 localhost klogd: CPU1: Thermal monitoring enabled (TM1)
Apr 11 16:23:16 localhost klogd: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Apr 11 16:23:16 localhost klogd: CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
Apr 11 16:23:16 localhost klogd: checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Apr 11 16:23:16 localhost klogd: Brought up 2 CPUs
Apr 11 16:23:16 localhost klogd: Total of 2 processors activated (12041.57 BogoMIPS).
Apr 11 16:23:16 localhost klogd: CPU0 attaching sched-domain:
Apr 11 16:23:16 localhost klogd: domain 0: span 0-1 level SIBLING
Apr 11 16:23:16 localhost klogd: groups: 0 1
Apr 11 16:23:16 localhost klogd: CPU1 attaching sched-domain:
Apr 11 16:23:16 localhost klogd: domain 0: span 0-1 level SIBLING
Apr 11 16:23:16 localhost klogd: groups: 1 0
Apr 11 16:23:16 localhost klogd: devtmpfs: initialized
Apr 11 16:23:16 localhost klogd: Booting paravirtualized kernel on bare hardware
Apr 11 16:23:16 localhost klogd: Time: 16:23:00 Date: 04/11/11
Apr 11 16:23:16 localhost klogd: NET: Registered protocol family 16
Apr 11 16:23:16 localhost klogd: ACPI: bus type pci registered
Apr 11 16:23:16 localhost klogd: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Apr 11 16:23:16 localhost klogd: PCI: Not using MMCONFIG.
Apr 11 16:23:16 localhost klogd: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
Apr 11 16:23:16 localhost klogd: PCI: Using configuration type 1 for base access
Apr 11 16:23:16 localhost klogd: bio: create slab <bio-0> at 0
Apr 11 16:23:16 localhost klogd: ACPI: EC: Look up EC in DSDT
Apr 11 16:23:16 localhost klogd: ACPI: Interpreter enabled
Apr 11 16:23:16 localhost klogd: ACPI: (supports S0 S1 S3 S4 S5)
Apr 11 16:23:16 localhost klogd: ACPI: Using IOAPIC for interrupt routing
Apr 11 16:23:16 localhost klogd: PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Apr 11 16:23:16 localhost klogd: PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Apr 11 16:23:16 localhost klogd: PCI: Using MMCONFIG for extended config space
Apr 11 16:23:16 localhost klogd: ACPI Warning: Incorrect checksum in table [OEMB] - AE, should be 9F 20090521 tbutils-246
Apr 11 16:23:16 localhost klogd: ACPI: No dock devices found.
Apr 11 16:23:16 localhost klogd: ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1b.0: reg 10 64bit mmio: [0xd7cf8000-0xd7cfbfff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:1b.0: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.0: reg 20 io port: [0x9880-0x989f]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.1: reg 20 io port: [0x9c00-0x9c1f]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.2: reg 20 io port: [0xa000-0xa01f]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.3: reg 20 io port: [0xa080-0xa09f]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.7: reg 10 32bit mmio: [0xd7cffc00-0xd7cfffff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:00:1d.7: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: reg 10 io port: [0xac00-0xac07]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: reg 14 io port: [0xa880-0xa883]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: reg 18 io port: [0xa800-0xa807]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: reg 1c io port: [0xa480-0xa483]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa40f]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: PME# supported from D3hot
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.2: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.0: reg 14 io port: [0xe000-0xe0ff]
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.0: reg 18 32bit mmio: [0xd7fe0000-0xd7feffff]
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.0: reg 30 32bit mmio: [0xd7fc0000-0xd7fdffff]
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.0: supports D1 D2
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.1: reg 10 32bit mmio: [0xd7ff0000-0xd7ffffff]
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.1: supports D1 D2
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: bridge 32bit mmio: [0xd7f00000-0xd7ffffff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: reg 10 64bit mmio: [0xd7efc000-0xd7efffff]
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: reg 30 32bit mmio: [0xd7ec0000-0xd7edffff]
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: supports D1 D2
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: PME# disabled
Apr 11 16:23:16 localhost klogd: pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: bridge 32bit mmio: [0xd7e00000-0xd7efffff]
Apr 11 16:23:16 localhost klogd: pci 0000:01:03.0: reg 10 io port: [0xbc00-0xbc07]
Apr 11 16:23:16 localhost klogd: pci 0000:01:03.0: reg 14 io port: [0xb480-0xb483]
Apr 11 16:23:16 localhost klogd: pci 0000:01:03.0: reg 18 io port: [0xb400-0xb407]
Apr 11 16:23:16 localhost klogd: pci 0000:01:03.0: reg 1c io port: [0xb080-0xb083]
Apr 11 16:23:16 localhost klogd: pci 0000:01:03.0: reg 20 io port: [0xb000-0xb00f]
Apr 11 16:23:16 localhost klogd: pci 0000:01:03.0: reg 30 32bit mmio: [0xd7de0000-0xd7dfffff]
Apr 11 16:23:16 localhost klogd: pci 0000:01:0a.0: reg 10 io port: [0xb800-0xb8ff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: transparent bridge
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: bridge 32bit mmio: [0xd7d00000-0xd7dfffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:00: on NUMA node 0
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 11 16:23:16 localhost klogd: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 11 16:23:16 localhost klogd: PCI: Using ACPI for IRQ routing
Apr 11 16:23:16 localhost klogd: NetLabel: Initializing
Apr 11 16:23:16 localhost klogd: NetLabel: domain hash size = 128
Apr 11 16:23:16 localhost klogd: NetLabel: protocols = UNLABELED CIPSOv4
Apr 11 16:23:16 localhost klogd: NetLabel: unlabeled traffic allowed by default
Apr 11 16:23:16 localhost klogd: hpet clockevent registered
Apr 11 16:23:16 localhost klogd: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Apr 11 16:23:16 localhost klogd: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Apr 11 16:23:16 localhost klogd: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Apr 11 16:23:16 localhost klogd: pnp: PnP ACPI init
Apr 11 16:23:16 localhost klogd: ACPI: bus type pnp registered
Apr 11 16:23:16 localhost klogd: pnp: PnP ACPI: found 19 devices
Apr 11 16:23:16 localhost klogd: ACPI: ACPI bus type pnp unregistered
Apr 11 16:23:16 localhost klogd: PnPBIOS: Disabled
Apr 11 16:23:16 localhost klogd: system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:08: ioport range 0x290-0x297 has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: ioport range 0x4d0-0x4d1 has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: ioport range 0x800-0x87f has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: ioport range 0x400-0x41f has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: ioport range 0x480-0x4bf has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
Apr 11 16:23:16 localhost klogd: system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
Apr 11 16:23:16 localhost klogd: system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:11: iomem range 0xe0000000-0xefffffff has been reserved
Apr 11 16:23:16 localhost klogd: system 00:12: iomem range 0x0-0x9ffff could not be reserved
Apr 11 16:23:16 localhost klogd: system 00:12: iomem range 0xe0000-0xfffff could not be reserved
Apr 11 16:23:16 localhost klogd: system 00:12: iomem range 0x100000-0x7fffffff could not be reserved
Apr 11 16:23:16 localhost klogd: pci 0000:01:03.0: BAR 6: address space collision on of device [0xd7de0000-0xd7dfffff]
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: IO window: 0xe000-0xefff
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: MEM window: 0xd7f00000-0xd7ffffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: IO window: 0xd000-0xdfff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: MEM window: disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PREFETCH window: disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: IO window: 0xc000-0xcfff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: MEM window: 0xd7e00000-0xd7efffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PREFETCH window: disabled
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: IO window: 0xb000-0xbfff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: MEM window: 0xd7d00000-0xd7dfffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:16 localhost klogd: pci 0000:00:01.0: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.0: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 11 16:23:16 localhost klogd: pci 0000:00:1c.1: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: pci 0000:00:1e.0: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: pci_bus 0000:00: resource 0 io: [0x00-0xffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:04: resource 1 mem: [0xd7f00000-0xd7ffffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:04: resource 2 pref mem [0xd8000000-0xdfffffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:02: resource 1 mem: [0xd7e00000-0xd7efffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:01: resource 1 mem: [0xd7d00000-0xd7dfffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:01: resource 2 pref mem [0x80000000-0x800fffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:01: resource 3 io: [0x00-0xffff]
Apr 11 16:23:16 localhost klogd: pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
Apr 11 16:23:16 localhost klogd: NET: Registered protocol family 2
Apr 11 16:23:16 localhost klogd: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 11 16:23:16 localhost klogd: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 11 16:23:16 localhost klogd: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Apr 11 16:23:16 localhost klogd: TCP: Hash tables configured (established 131072 bind 65536)
Apr 11 16:23:16 localhost klogd: TCP reno registered
Apr 11 16:23:16 localhost klogd: NET: Registered protocol family 1
Apr 11 16:23:16 localhost klogd: Trying to unpack rootfs image as initramfs...
Apr 11 16:23:16 localhost klogd: Freeing initrd memory: 6089k freed
Apr 11 16:23:16 localhost klogd: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Apr 11 16:23:16 localhost klogd: apm: disabled - APM is not SMP safe.
Apr 11 16:23:16 localhost klogd: audit: initializing netlink socket (disabled)
Apr 11 16:23:16 localhost klogd: type=2000 audit(1302538979.483:1): initialized
Apr 11 16:23:16 localhost klogd: highmem bounce pool size: 64 pages
Apr 11 16:23:16 localhost klogd: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Apr 11 16:23:16 localhost klogd: VFS: Disk quotas dquot_6.5.2
Apr 11 16:23:16 localhost klogd: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 11 16:23:16 localhost klogd: msgmni has been set to 1721
Apr 11 16:23:16 localhost klogd: alg: No test for stdrng (krng)
Apr 11 16:23:16 localhost klogd: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Apr 11 16:23:16 localhost klogd: io scheduler noop registered
Apr 11 16:23:16 localhost klogd: io scheduler anticipatory registered
Apr 11 16:23:16 localhost klogd: io scheduler deadline registered
Apr 11 16:23:16 localhost klogd: io scheduler cfq registered (default)
Apr 11 16:23:16 localhost klogd: pci 0000:04:00.0: Boot video device
Apr 11 16:23:16 localhost klogd: pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
Apr 11 16:23:16 localhost klogd: pcieport-driver 0000:00:01.0: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
Apr 11 16:23:16 localhost klogd: pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
Apr 11 16:23:16 localhost klogd: pcieport-driver 0000:00:1c.1: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: vesafb: framebuffer at 0xd8000000, mapped to 0xf7c80000, using 1875k, total 16384k
Apr 11 16:23:16 localhost klogd: vesafb: mode is 800x600x16, linelength=1600, pages=16
Apr 11 16:23:16 localhost klogd: vesafb: protected mode interface info at c000:58f8
Apr 11 16:23:16 localhost klogd: vesafb: pmi: set display start = c00c598c, set palette = c00c59d8
Apr 11 16:23:16 localhost klogd: vesafb: pmi: ports = e010 e016 e054 e038 e03c e05c e000 e004 e0b0 e0b2 e0b4
Apr 11 16:23:16 localhost klogd: vesafb: scrolling: redraw
Apr 11 16:23:16 localhost klogd: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Apr 11 16:23:16 localhost klogd: Console: switching to colour frame buffer device 100x37
Apr 11 16:23:16 localhost klogd: fb0: VESA VGA frame buffer device
Apr 11 16:23:16 localhost klogd: isapnp: Scanning for PnP cards...
Apr 11 16:23:16 localhost klogd: Switched to high resolution mode on CPU 1
Apr 11 16:23:16 localhost klogd: Switched to high resolution mode on CPU 0
Apr 11 16:23:16 localhost klogd: isapnp: No Plug & Play device found
Apr 11 16:23:16 localhost klogd: Linux agpgart interface v0.103
Apr 11 16:23:16 localhost klogd: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr 11 16:23:16 localhost klogd: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 11 16:23:16 localhost klogd: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr 11 16:23:16 localhost klogd: 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 11 16:23:16 localhost klogd: 00:0f: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr 11 16:23:16 localhost klogd: brd: module loaded
Apr 11 16:23:16 localhost klogd: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Apr 11 16:23:16 localhost klogd: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Apr 11 16:23:16 localhost klogd: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 11 16:23:16 localhost klogd: mice: PS/2 mouse device common for all mice
Apr 11 16:23:16 localhost klogd: rtc_cmos 00:03: RTC can wake from S4
Apr 11 16:23:16 localhost klogd: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Apr 11 16:23:16 localhost klogd: rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
Apr 11 16:23:16 localhost klogd: cpuidle: using governor ladder
Apr 11 16:23:16 localhost klogd: cpuidle: using governor menu
Apr 11 16:23:16 localhost klogd: TCP cubic registered
Apr 11 16:23:16 localhost klogd: Using IPI No-Shortcut mode
Apr 11 16:23:16 localhost klogd: PM: Resume from disk failed.
Apr 11 16:23:16 localhost klogd: registered taskstats version 1
Apr 11 16:23:16 localhost klogd: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Apr 11 16:23:16 localhost klogd: Magic number: 7:333:388
Apr 11 16:23:16 localhost klogd: rtc_cmos 00:03: setting system clock to 2011-04-11 16:23:01 UTC (1302538981)
Apr 11 16:23:16 localhost klogd: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Apr 11 16:23:16 localhost klogd: Freeing unused kernel memory: 436k freed
Apr 11 16:23:16 localhost klogd: usbcore: registered new interface driver usbfs
Apr 11 16:23:16 localhost klogd: usbcore: registered new interface driver hub
Apr 11 16:23:16 localhost klogd: usbcore: registered new device driver usb
Apr 11 16:23:16 localhost klogd: usbcore: registered new interface driver hiddev
Apr 11 16:23:16 localhost klogd: usbcore: registered new interface driver usbhid
Apr 11 16:23:16 localhost klogd: usbhid: v2.6:USB HID core driver
Apr 11 16:23:16 localhost klogd: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: debug port 1
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd7cffc00
Apr 11 16:23:16 localhost klogd: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr 11 16:23:16 localhost klogd: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr 11 16:23:16 localhost klogd: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb1: Product: EHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb1: Manufacturer: Linux 2.6.31.5-desktop-1mnb ehci_hcd
Apr 11 16:23:16 localhost klogd: usb usb1: SerialNumber: 0000:00:1d.7
Apr 11 16:23:16 localhost klogd: usb usb1: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 1-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 1-0:1.0: 8 ports detected
Apr 11 16:23:16 localhost klogd: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Apr 11 16:23:16 localhost klogd: uhci_hcd: USB Universal Host Controller Interface driver
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880
Apr 11 16:23:16 localhost klogd: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Apr 11 16:23:16 localhost klogd: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb2: Product: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb2: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd
Apr 11 16:23:16 localhost klogd: usb usb2: SerialNumber: 0000:00:1d.0
Apr 11 16:23:16 localhost klogd: usb usb2: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 2-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 2-0:1.0: 2 ports detected
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00
Apr 11 16:23:16 localhost klogd: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Apr 11 16:23:16 localhost klogd: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb3: Product: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb3: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd
Apr 11 16:23:16 localhost klogd: usb usb3: SerialNumber: 0000:00:1d.1
Apr 11 16:23:16 localhost klogd: usb usb3: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 3-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 3-0:1.0: 2 ports detected
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000
Apr 11 16:23:16 localhost klogd: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr 11 16:23:16 localhost klogd: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb4: Product: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb4: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd
Apr 11 16:23:16 localhost klogd: usb usb4: SerialNumber: 0000:00:1d.2
Apr 11 16:23:16 localhost klogd: usb usb4: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 4-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 4-0:1.0: 2 ports detected
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Apr 11 16:23:16 localhost klogd: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a080
Apr 11 16:23:16 localhost klogd: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr 11 16:23:16 localhost klogd: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 11 16:23:16 localhost klogd: usb usb5: Product: UHCI Host Controller
Apr 11 16:23:16 localhost klogd: usb usb5: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd
Apr 11 16:23:16 localhost klogd: usb usb5: SerialNumber: 0000:00:1d.3
Apr 11 16:23:16 localhost klogd: usb usb5: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: hub 5-0:1.0: USB hub found
Apr 11 16:23:16 localhost klogd: hub 5-0:1.0: 2 ports detected
Apr 11 16:23:16 localhost klogd: SCSI subsystem initialized
Apr 11 16:23:16 localhost klogd: libata version 3.00 loaded.
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.1: version 2.13
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.1: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: scsi0 : ata_piix
Apr 11 16:23:16 localhost klogd: scsi1 : ata_piix
Apr 11 16:23:16 localhost klogd: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Apr 11 16:23:16 localhost klogd: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Apr 11 16:23:16 localhost klogd: ata_piix 0000:00:1f.2: setting latency timer to 64
Apr 11 16:23:16 localhost klogd: scsi2 : ata_piix
Apr 11 16:23:16 localhost klogd: ata2: port disabled. ignoring.
Apr 11 16:23:16 localhost klogd: scsi3 : ata_piix
Apr 11 16:23:16 localhost klogd: ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
Apr 11 16:23:16 localhost klogd: ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
Apr 11 16:23:16 localhost klogd: ata1.00: ATA-7: ST3160815A, 3.AAD, max UDMA/100
Apr 11 16:23:16 localhost klogd: ata1.00: 312581808 sectors, multi 16: LBA48
Apr 11 16:23:16 localhost klogd: usb 1-4: new high speed USB device using ehci_hcd and address 3
Apr 11 16:23:16 localhost klogd: ata1.00: configured for UDMA/100
Apr 11 16:23:16 localhost klogd: scsi 0:0:0:0: Direct-Access ATA ST3160815A 3.AA PQ: 0 ANSI: 5
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] Write Protect is off
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 11 16:23:16 localhost klogd: sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Apr 11 16:23:16 localhost klogd: sd 0:0:0:0: [sda] Attached SCSI disk
Apr 11 16:23:16 localhost klogd: Uniform Multi-Platform E-IDE driver
Apr 11 16:23:16 localhost klogd: ide-gd driver 1.18
Apr 11 16:23:16 localhost klogd: it821x 0000:01:03.0: IDE controller (0x1283:0x8212 rev 0x13)
Apr 11 16:23:16 localhost klogd: ITE821x IDE 0000:01:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 11 16:23:16 localhost klogd: it821x 0000:01:03.0: controller in pass through mode
Apr 11 16:23:16 localhost klogd: it821x 0000:01:03.0: 100% native mode on irq 20
Apr 11 16:23:16 localhost klogd: ide0: BM-DMA at 0xb000-0xb007
Apr 11 16:23:16 localhost klogd: ide1: BM-DMA at 0xb008-0xb00f
Apr 11 16:23:16 localhost klogd: Probing IDE interface ide0...
Apr 11 16:23:16 localhost klogd: usb 1-4: New USB device found, idVendor=0ac8, idProduct=c40a
Apr 11 16:23:16 localhost klogd: usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 11 16:23:16 localhost klogd: usb 1-4: Product: A4 TECH USB2.0 PC Camera J
Apr 11 16:23:16 localhost klogd: usb 1-4: Manufacturer: A4 TECH
Apr 11 16:23:16 localhost klogd: usb 1-4: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: usb 1-5: new high speed USB device using ehci_hcd and address 4
Apr 11 16:23:16 localhost klogd: usb 1-5: New USB device found, idVendor=058f, idProduct=6362
Apr 11 16:23:16 localhost klogd: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 11 16:23:16 localhost klogd: usb 1-5: Product: Mass Storage Device
Apr 11 16:23:16 localhost klogd: usb 1-5: Manufacturer: Generic
Apr 11 16:23:16 localhost klogd: usb 1-5: SerialNumber: 058F312D81B
Apr 11 16:23:16 localhost klogd: usb 1-5: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: usb 2-1: new full speed USB device using uhci_hcd and address 2
Apr 11 16:23:16 localhost klogd: usb 2-1: New USB device found, idVendor=09da, idProduct=8090
Apr 11 16:23:16 localhost klogd: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 11 16:23:16 localhost klogd: usb 2-1: Product: USB Full Speed
Apr 11 16:23:16 localhost klogd: usb 2-1: Manufacturer: A4Tech
Apr 11 16:23:16 localhost klogd: usb 2-1: configuration #1 chosen from 1 choice
Apr 11 16:23:16 localhost klogd: input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
Apr 11 16:23:16 localhost klogd: generic-usb 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input0
Apr 11 16:23:16 localhost klogd: input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
Apr 11 16:23:16 localhost klogd: generic-usb 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input1
Apr 11 16:23:16 localhost klogd: hdb: Optiarc DVD RW AD-7203A, ATAPI CD/DVD-ROM drive
Apr 11 16:23:16 localhost klogd: hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Apr 11 16:23:16 localhost klogd: hdb: UDMA/66 mode selected
Apr 11 16:23:16 localhost klogd: Probing IDE interface ide1...
Apr 11 16:23:16 localhost klogd: ide0 at 0xbc00-0xbc07,0xb482 on irq 20
Apr 11 16:23:16 localhost klogd: ide1 at 0xb400-0xb407,0xb082 on irq 20
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda6): barriers enabled
Apr 11 16:23:16 localhost klogd: kjournald2 starting: pid 74, dev sda6:8, commit interval 5 seconds
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda6): delayed allocation enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs: file extents enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs: mballoc enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda6): mounted filesystem with ordered data mode
Apr 11 16:23:16 localhost klogd: Tomoyo security MAC extension available but disabled by default. If you want to
Apr 11 16:23:16 localhost klogd: enable and use it, ccs-tools package must be installed.
Apr 11 16:23:16 localhost klogd: udev: starting version 146
Apr 11 16:23:16 localhost klogd: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Apr 11 16:23:16 localhost klogd: ACPI: Power Button [PWRF]
Apr 11 16:23:16 localhost klogd: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
Apr 11 16:23:16 localhost klogd: ACPI: Power Button [PWRB]
Apr 11 16:23:16 localhost klogd: processor LNXCPU:00: registered as cooling_device0
Apr 11 16:23:16 localhost klogd: ACPI: Processor [CPU0] (supports 8 throttling states)
Apr 11 16:23:16 localhost klogd: processor LNXCPU:01: registered as cooling_device1
Apr 11 16:23:16 localhost klogd: parport_pc 00:07: reported by Plug and Play ACPI
Apr 11 16:23:16 localhost klogd: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Apr 11 16:23:16 localhost klogd: Floppy drive(s): fd0 is 1.44M
Apr 11 16:23:16 localhost klogd: FDC 0 is a post-1991 82077
Apr 11 16:23:16 localhost klogd: ppdev: user-space parallel port driver
Apr 11 16:23:16 localhost klogd: dm1105 0000:01:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Apr 11 16:23:16 localhost klogd: DVB: registering new adapter (dm1105)
Apr 11 16:23:16 localhost klogd: dm1105 0000:01:0a.0: MAC 00:18:bd:5c:80:9e
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda6): internal journal on sda6:8
Apr 11 16:23:16 localhost klogd: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
Apr 11 16:23:16 localhost klogd: input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:1e.0/0000:01:0a.0/input/input5
Apr 11 16:23:16 localhost klogd: name_count maxed, losing inode data: dev=00:05, inode=2813
Apr 11 16:23:16 localhost klogd: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda8): barriers enabled
Apr 11 16:23:16 localhost klogd: kjournald2 starting: pid 413, dev sda8:8, commit interval 5 seconds
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda8): internal journal on sda8:8
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda8): delayed allocation enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs: file extents enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs: mballoc enabled
Apr 11 16:23:16 localhost klogd: EXT4-fs (sda8): mounted filesystem with ordered data mode
Apr 11 16:23:16 localhost klogd: fuse init (API version 7.12)
Apr 11 16:23:16 localhost klogd: Adding 1172704k swap on /dev/sda7. Priority:-1 extents:1 across:1172704k
Apr 11 16:23:18 localhost acpid: client connected from 869[16:16]
Apr 11 16:23:18 localhost acpid: 1 client rule loaded
Apr 11 16:23:19 localhost acpid: client connected from 900[0:0]
Apr 11 16:23:19 localhost acpid: 1 client rule loaded
Apr 11 16:23:19 localhost klogd: pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:19 localhost klogd: [drm] Initialized drm 1.1.0 20060810
Apr 11 16:23:19 localhost klogd: sky2 driver version 1.23
Apr 11 16:23:19 localhost klogd: sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr 11 16:23:19 localhost klogd: sky2 0000:02:00.0: setting latency timer to 64
Apr 11 16:23:19 localhost klogd: sky2 0000:02:00.0: Yukon-2 EC chip revision 1
Apr 11 16:23:19 localhost klogd: sky2 0000:02:00.0: irq 27 for MSI/MSI-X
Apr 11 16:23:19 localhost klogd: sky2 eth0: addr 00:11:2f:f4:63:6b
Apr 11 16:23:19 localhost klogd: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr 11 16:23:19 localhost klogd: input: PC Speaker as /devices/platform/pcspkr/input/input6
Apr 11 16:23:20 localhost klogd: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 11 16:23:20 localhost klogd: ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
Apr 11 16:23:20 localhost klogd: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Apr 11 16:23:20 localhost klogd: ide-cd driver 5.00
Apr 11 16:23:20 localhost klogd: ide-cd: hdb: ATAPI 126X DVD-ROM DVD-R/RAM CD-R/RW drive, 1280kB Cache
Apr 11 16:23:20 localhost klogd: Uniform CD-ROM driver Revision: 3.20
Apr 11 16:23:20 localhost klogd: Initializing USB Mass Storage driver...
Apr 11 16:23:20 localhost klogd: scsi4 : SCSI emulation for USB Mass Storage devices
Apr 11 16:23:20 localhost klogd: usbcore: registered new interface driver usb-storage
Apr 11 16:23:20 localhost klogd: USB Mass Storage support registered.
Apr 11 16:23:20 localhost klogd: usb-storage: device found at 4
Apr 11 16:23:20 localhost klogd: usb-storage: waiting for device to settle before scanning
Apr 11 16:23:20 localhost klogd: Linux video capture interface: v2.00
Apr 11 16:23:20 localhost klogd: uvcvideo: Found UVC 1.00 device A4 TECH USB2.0 PC Camera J (0ac8:c40a)
Apr 11 16:23:20 localhost klogd: input: A4 TECH USB2.0 PC Camera J as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input7
Apr 11 16:23:20 localhost klogd: usbcore: registered new interface driver uvcvideo
Apr 11 16:23:20 localhost klogd: USB Video Class driver (v0.1.0)
Apr 11 16:23:20 localhost klogd: iTCO_vendor_support: vendor-support=0
Apr 11 16:23:20 localhost klogd: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Apr 11 16:23:20 localhost klogd: iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
Apr 11 16:23:20 localhost klogd: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
Apr 11 16:23:20 localhost klogd: intel_rng: FWH not detected
Apr 11 16:23:20 localhost klogd: pci 0000:04:00.0: setting latency timer to 64
Apr 11 16:23:20 localhost klogd: [drm] Initialized radeon 1.31.0 20080528 for 0000:04:00.0 on minor 0
Apr 11 16:23:20 localhost klogd: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 11 16:23:20 localhost klogd: HDA Intel 0000:00:1b.0: setting latency timer to 64
Apr 11 16:23:20 localhost klogd: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
Apr 11 16:23:20 localhost klogd: name_count maxed, losing inode data: dev=00:05, inode=4676
Apr 11 16:23:20 localhost klogd: name_count maxed, losing inode data: dev=00:05, inode=4
Apr 11 16:23:20 localhost klogd: name_count maxed, losing inode data: dev=00:05, inode=4
Apr 11 16:23:20 localhost klogd: name_count maxed, losing inode data: dev=00:05, inode=4622
Apr 11 16:23:20 localhost last message repeated 3 times
Apr 11 16:23:20 localhost klogd: name_count maxed, losing inode data: dev=00:05, inode=4
Apr 11 16:23:20 localhost klogd: name_count maxed, losing inode data: dev=00:05, inode=4
Apr 11 16:23:20 localhost klogd: [drm] Setting GART location based on new memory map
Apr 11 16:23:20 localhost klogd: [drm] Loading R300 Microcode
Apr 11 16:23:20 localhost klogd: [drm] Num pipes: 1
Apr 11 16:23:20 localhost klogd: [drm] writeback test succeeded in 1 usecs
Apr 11 16:23:23 localhost klogd: imwheel[1159]: segfault at 118 ip 0804c932 sp bfe7d4a0 error 4 in imwheel[8048000+e000]
Apr 11 16:23:25 localhost klogd: scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:0: Attached scsi generic sg1 type 0
Apr 11 16:23:25 localhost klogd: scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:1: Attached scsi generic sg2 type 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:0: [sdb] Attached SCSI removable disk
Apr 11 16:23:25 localhost klogd: scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:2: Attached scsi generic sg3 type 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:1: [sdc] Attached SCSI removable disk
Apr 11 16:23:25 localhost klogd: scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:3: Attached scsi generic sg4 type 0
Apr 11 16:23:25 localhost klogd: sd 4:0:0:2: [sdd] Attached SCSI removable disk
Apr 11 16:23:25 localhost klogd: sd 4:0:0:3: [sde] Attached SCSI removable disk
Apr 11 16:23:25 localhost klogd: usb-storage: device scan complete
Apr 11 16:23:26 localhost service_harddrake[1290]: ### Program is starting ###
Apr 11 16:23:28 localhost service_harddrake[1290]: running: dmidecode
Apr 11 16:23:28 localhost service_harddrake[1290]: modified file /etc/sysconfig/harddrake2/kernel
Apr 11 16:23:28 localhost service_harddrake[1290]: modified file /etc/sysconfig/harddrake2/xorg
Apr 11 16:23:28 localhost service_harddrake[1290]: created file /etc/sysconfig/harddrake2/previous_hw
Apr 11 16:23:28 localhost init: Entering runlevel: 5
Apr 11 16:23:29 localhost crond[1597]: (CRON) STARTUP (1.4.1)
Apr 11 16:23:29 localhost crond[1597]: (CRON) INFO (running with inotify support)
Apr 11 16:23:30 localhost klogd: NET: Registered protocol family 10
Apr 11 16:23:30 localhost klogd: lo: Disabled Privacy Extensions
Apr 11 16:23:30 localhost klogd: usbcore: registered new interface driver snd-usb-audio
Apr 11 16:23:32 localhost avahi-daemon[1928]: Found user 'avahi' (UID 17) and group 'avahi' (GID 17).
Apr 11 16:23:32 localhost avahi-daemon[1928]: Successfully dropped root privileges.
Apr 11 16:23:32 localhost avahi-daemon[1928]: avahi-daemon 0.6.25 starting up.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Successfully called chroot().
Apr 11 16:23:32 localhost avahi-daemon[1928]: Successfully dropped remaining capabilities.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Loading service file /services/sftp-ssh.service.
Apr 11 16:23:32 localhost avahi-daemon[1928]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Network interface enumeration completed.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Registering HINFO record with values 'I686'/'LINUX'.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Server startup complete. Host name is linux.local. Local service cookie is 1995670916.
Apr 11 16:23:32 localhost avahi-daemon[1928]: Service "SFTP File Transfer on linux" (/services/sftp-ssh.service) successfully established.
Apr 11 16:23:32 localhost xinetd[1944]: Reading included configuration file: /etc/xinetd.d/rsync [file=/etc/xinetd.conf] [line=15]
Apr 11 16:23:32 localhost xinetd[1944]: removing rsync
Apr 11 16:23:32 localhost xinetd[1944]: xinetd Version 2.3.14 started with libwrap options compiled in.
Apr 11 16:23:32 localhost xinetd[1944]: Started working: 0 available services
Apr 11 16:23:33 localhost klogd: ondemand governor failed, too long transition latency of HW, fallback to performance governor
Apr 11 16:23:33 localhost klogd: ip_tables: (C) 2000-2006 Netfilter Core Team
Apr 11 16:23:34 localhost klogd: CPU0 attaching NULL sched-domain.
Apr 11 16:23:34 localhost klogd: CPU1 attaching NULL sched-domain.
Apr 11 16:23:34 localhost klogd: CPU0 attaching sched-domain:
Apr 11 16:23:34 localhost klogd: domain 0: span 0-1 level SIBLING
Apr 11 16:23:34 localhost klogd: groups: 0 1
Apr 11 16:23:34 localhost klogd: CPU1 attaching sched-domain:
Apr 11 16:23:34 localhost klogd: domain 0: span 0-1 level SIBLING
Apr 11 16:23:34 localhost klogd: groups: 1 0
Apr 11 16:23:34 localhost smbd[2038]: [2011/04/11 16:23:34, 0] printing/print_cups.c:103(cups_connect)
Apr 11 16:23:34 localhost smbd[2038]: Unable to connect to CUPS server localhost:631 - В соединении отказано
Apr 11 16:23:34 localhost smbd[2047]: [2011/04/11 16:23:34, 0] printing/print_cups.c:103(cups_connect)
Apr 11 16:23:34 localhost smbd[2047]: Unable to connect to CUPS server localhost:631 - В соединении отказано
Apr 11 16:23:34 localhost nmbd[2089]: [2011/04/11 16:23:34, 0] nmbd/nmbd_subnetdb.c:206(create_subnets)
Apr 11 16:23:34 localhost nmbd[2089]: create_subnets: No local IPv4 non-loopback interfaces !
Apr 11 16:23:34 localhost nmbd[2089]: [2011/04/11 16:23:34, 0] nmbd/nmbd_subnetdb.c:207(create_subnets)
Apr 11 16:23:34 localhost nmbd[2089]: create_subnets: Waiting for an interface to appear ...
Apr 11 16:23:35 localhost smbd[2063]: [2011/04/11 16:23:35, 0] smbd/server.c:457(smbd_open_one_socket)
Apr 11 16:23:35 localhost smbd[2063]: smbd_open_once_socket: open_socket_in: Адрес уже используется
Apr 11 16:23:35 localhost smbd[2063]: [2011/04/11 16:23:35, 0] smbd/server.c:457(smbd_open_one_socket)
Apr 11 16:23:35 localhost smbd[2063]: smbd_open_once_socket: open_socket_in: Адрес уже используется
Apr 11 16:23:35 localhost klogd: Netfilter messages via NETLINK v0.30.
Apr 11 16:23:36 localhost klogd: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Apr 11 16:23:36 localhost klogd: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Apr 11 16:23:36 localhost klogd: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Apr 11 16:23:36 localhost klogd: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Apr 11 16:23:36 localhost postfix/postfix-script[2179]: starting the Postfix mail system
Apr 11 16:23:36 localhost postfix/master[2180]: daemon started -- version 2.6.5, configuration /etc/postfix
Apr 11 16:23:37 localhost klogd: ctnetlink v0.93: registering with nfnetlink.
Apr 11 16:23:37 localhost klogd: ClusterIP Version 0.8 loaded successfully
Apr 11 16:23:39 localhost klogd: xt_time: kernel timezone is +0400
Apr 11 16:23:41 localhost klogd: netfilter PSD loaded - (c) astaro AG
Apr 11 16:23:41 localhost klogd: IFWLOG: register target
Apr 11 16:23:41 localhost logger: Shorewall started
Apr 11 16:23:48 localhost rtkit-daemon[2559]: Sucessfully called chroot.
Apr 11 16:23:48 localhost rtkit-daemon[2559]: Sucessfully dropped privileges.
Apr 11 16:23:48 localhost rtkit-daemon[2559]: Sucessfully limited resources.
Apr 11 16:23:48 localhost rtkit-daemon[2559]: Running.
Apr 11 16:23:48 localhost rtkit-daemon[2559]: Watchdog thread running.
Apr 11 16:23:48 localhost rtkit-daemon[2559]: Canary thread running.
Apr 11 16:23:48 localhost mdkapplet[2556]: ### Program is starting ###
Apr 11 16:23:48 localhost net_applet[2567]: ### Program is starting ###
Apr 11 16:23:49 localhost draksnapshot-applet[2569]: ### Program is starting ###
Apr 11 16:23:49 localhost rtkit-daemon[2559]: Sucessfully made thread 2557 of process 2557 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -11.
Apr 11 16:23:50 localhost rtkit-daemon[2559]: Supervising 1 threads of 1 processes of 1 users.
Apr 11 16:23:50 localhost rtkit-daemon[2559]: Sucessfully made thread 2575 of process 2557 (/usr/bin/pulseaudio) owned by '10001' RT at priority 5.
Apr 11 16:23:50 localhost rtkit-daemon[2559]: Supervising 2 threads of 1 processes of 1 users.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Sucessfully made thread 2577 of process 2557 (/usr/bin/pulseaudio) owned by '10001' RT at priority 5.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Supervising 3 threads of 1 processes of 1 users.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Sucessfully made thread 2579 of process 2557 (/usr/bin/pulseaudio) owned by '10001' RT at priority 5.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Supervising 4 threads of 1 processes of 1 users.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Sucessfully made thread 2615 of process 2615 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -11.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Supervising 5 threads of 2 processes of 1 users.
Apr 11 16:23:51 localhost pulseaudio[2615]: pid.c: Daemon already running.
Apr 11 16:23:51 localhost rtkit-daemon[2559]: Sucessfully made thread 2617 of process 2617 (/usr/bin/pulseaudio) owned by '10001' high priority at nice level -11.
Apr 11 16:23:52 localhost rtkit-daemon[2559]: Supervising 5 threads of 2 processes of 1 users.
Apr 11 16:23:52 localhost pulseaudio[2617]: pid.c: Daemon already running.
Apr 11 16:23:55 localhost draksnapshot-applet[2569]: running: ionice -p 2569 -n7
Apr 11 16:23:55 localhost mdkapplet[2556]: ### Program is exiting ###
boot.log
text
Apr 11 00:21:42 localhost NET[3115]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
Apr 11 11:15:47 localhost NET[4329]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
Apr 11 11:57:36 localhost NET[15788]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
ещё этот пожалуйста Xorg.0.log
Xorg.0.log
text
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux_2.6.22.18-server-1mdv Mandriva
Current Operating System: Linux localhost 2.6.31.5-desktop-1mnb #1 SMP Fri Oct 23 01:46:54 EDT 2009 i686
Build Date: 13 October 2009 12:19:57PM
Before reporting problems, check http://qa.mandriva.com
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 11 16:23:19 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) Option "DontZap" "False"
(**) Option "AllowMouseOpenFail"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI: (0:1:10:0) 109f:036f:0001:2002 Trigem Computer Inc. rev 1, I/O @ 0x0000b800/256
(--) PCI:*(0:4:0:0) 1002:5b62:1043:0022 ATI Technologies Inc RV380 [Radeon X600 (PCIE)] rev 0, Mem @ 0xd8000000/134217728, 0xd7fe0000/65536, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
(--) PCI: (0:4:0:1) 1002:5b72:1043:0023 ATI Technologies Inc RV380 [Radeon X600] rev 0, Mem @ 0xd7ff0000/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.1
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension Multi-Buffering
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) v4l driver for Video4Linux
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 04@00:00:0
(WW) Falling back to old probe method for v4l
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEON(0): TOTO SAYS 00000000d7fe0000
(II) RADEON(0): MMIO registers at 0x00000000d7fe0000: size 64KB
(II) RADEON(0): PCI bus 4 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"screen1" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon X600 (RV370) 5B62 (PCIE)" (ChipID = 0x5b62)
(--) RADEON(0): Linear framebuffer at 0x00000000d8000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:04:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:04:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 30000, sclk: 400.000000, mclk: 300.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=30000
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Output VGA-0 using monitor section monitor1
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): Port2:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "BNQ", prod id 30721
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x720"x60.0 67.32 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
(II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ Model: 7801 Serial#: 21573
(II) RADEON(0): Year: 2008 Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617
(II) RADEON(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
(II) RADEON(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
(II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: J4801634026
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ G700
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0009d1017845540000
(II) RADEON(0): 101201030e221b782edc55a359489e24
(II) RADEON(0): 115054a56b8071008100814001010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff004a3438
(II) RADEON(0): 30313633343032360a20000000fd0037
(II) RADEON(0): 4c1f530e000a202020202020000000fc
(II) RADEON(0): 0042656e5120473730300a20202000d2
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "BNQ", prod id 30721
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x720"x60.0 67.32 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
(II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ Model: 7801 Serial#: 21573
(II) RADEON(0): Year: 2008 Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617
(II) RADEON(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
(II) RADEON(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
(II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: J4801634026
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ G700
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0009d1017845540000
(II) RADEON(0): 101201030e221b782edc55a359489e24
(II) RADEON(0): 115054a56b8071008100814001010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff004a3438
(II) RADEON(0): 30313633343032360a20000000fd0037
(II) RADEON(0): 4c1f530e000a202020202020000000fc
(II) RADEON(0): 0042656e5120473730300a20202000d2
(II) RADEON(0): EDID vendor "BNQ", prod id 30721
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (340, 270) mm
(**) RADEON(0): DPI set to (95, 120)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEON(0): RADEONScreenInit d8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable primary dac
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131040 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 32 kb for PCI GART at offset 0x07ff8000
(II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
(II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
(II) RADEON(0): Will use 55808 kb for textures at offset 0x012c8000
(II) RADEON(0): Will use 56000 kb for X Server offscreen at offset 0x04948000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:04:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:04:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0x2b000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf86d0000
(II) RADEON(0): [pci] ring handle = 0x2f0da000
(II) RADEON(0): [pci] Ring mapped at 0xaeddb000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x1d0fa000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb7176000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x2b0fa000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaebdb000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x2b13a000
(II) RADEON(0): [pci] GART Texture map mapped at 0xacf5b000
(II) RADEON(0): [drm] register handle = 0x2affd000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xdfffd800 is: 0xdfffd800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): num quad-pipes is 1
(II) EXA(0): Offscreen pixmap area of 57344000 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable TV
disable primary dac
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xdfffd800 0xdfffd800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set primary dac
enable primary dac
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:04:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:04:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 270
(II) config/hal: Adding input device A4 TECH USB2.0 PC Camera J
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) A4 TECH USB2.0 PC Camera J: always reports core events
(**) A4 TECH USB2.0 PC Camera J: Device: "/dev/input/event7"
(II) A4 TECH USB2.0 PC Camera J: Found keys
(II) A4 TECH USB2.0 PC Camera J: Configuring as keyboard
(II) XINPUT: Adding extended input device "A4 TECH USB2.0 PC Camera J" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,compose:rwin"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,compose:rwin"
(II) config/hal: Adding input device DVB on-card IR receiver
(**) DVB on-card IR receiver: always reports core events
(**) DVB on-card IR receiver: Device: "/dev/input/event5"
(II) DVB on-card IR receiver: Found keys
(II) DVB on-card IR receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "DVB on-card IR receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,compose:rwin"
(II) config/hal: Adding input device A4Tech USB Full Speed
(**) A4Tech USB Full Speed: always reports core events
(**) A4Tech USB Full Speed: Device: "/dev/input/event2"
(II) A4Tech USB Full Speed: Found 1 mouse buttons
(II) A4Tech USB Full Speed: Found scroll wheel(s)
(II) A4Tech USB Full Speed: Found x and y absolute axes
(II) A4Tech USB Full Speed: Found keys
(II) A4Tech USB Full Speed: Configuring as mouse
(II) A4Tech USB Full Speed: Configuring as keyboard
(**) A4Tech USB Full Speed: YAxisMapping: buttons 4 and 5
(**) A4Tech USB Full Speed: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech USB Full Speed" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,compose:rwin"
(**) A4Tech USB Full Speed: (accel) keeping acceleration scheme 1
(**) A4Tech USB Full Speed: (accel) filter chain progression: 2.00
(**) A4Tech USB Full Speed: (accel) filter stage 0: 20.00 ms
(**) A4Tech USB Full Speed: (accel) set acceleration profile 0
(II) A4Tech USB Full Speed: initialized for absolute axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,compose:rwin"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru(winkeys)"
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll,compose:rwin"
(II) config/hal: Adding input device A4Tech USB Full Speed
(**) A4Tech USB Full Speed: always reports core events
(**) A4Tech USB Full Speed: Device: "/dev/input/event1"
(II) A4Tech USB Full Speed: Found 20 mouse buttons
(II) A4Tech USB Full Speed: Found x and y relative axes
(II) A4Tech USB Full Speed: Found scroll wheel(s)
(II) A4Tech USB Full Speed: Configuring as mouse
(**) A4Tech USB Full Speed: YAxisMapping: buttons 4 and 5
(**) A4Tech USB Full Speed: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech USB Full Speed" (type: MOUSE)
(**) A4Tech USB Full Speed: (accel) keeping acceleration scheme 1
(**) A4Tech USB Full Speed: (accel) filter chain progression: 2.00
(**) A4Tech USB Full Speed: (accel) filter stage 0: 20.00 ms
(**) A4Tech USB Full Speed: (accel) set acceleration profile 0
(II) A4Tech USB Full Speed: initialized for relative axes.
(II) RADEON(0): EDID vendor "BNQ", prod id 30721
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x720"x60.0 67.32 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
(II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: BNQ Model: 7801 Serial#: 21573
(II) RADEON(0): Year: 2008 Week: 16
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617
(II) RADEON(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
(II) RADEON(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
(II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: J4801634026
(II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: BenQ G700
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0009d1017845540000
(II) RADEON(0): 101201030e221b782edc55a359489e24
(II) RADEON(0): 115054a56b8071008100814001010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300520e1100001e000000ff004a3438
(II) RADEON(0): 30313633343032360a20000000fd0037
(II) RADEON(0): 4c1f530e000a202020202020000000fc
(II) RADEON(0): 0042656e5120473730300a20202000d2
(II) RADEON(0): EDID vendor "BNQ", prod id 30721
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
Войдите или зарегистрируйтесь, чтобы ответить.
