Долго не проявлялась после того как перешел на qtcurve. (где-то прочел, что баг связан может быть с оксигеном)
Но после обновления кед решил вернуться на oxygen(надеялся, что починили).
Система опять перестала грузиться - удалил оксиген и дрова на видео, перезапустил - работает, поставил дрова и qtcurve - работало, но потом опять перестало и прежние пляски с бубном не помогают. Т.е. система грузиться "иногда", по желанию
Но после обновления кед решил вернуться на oxygen(надеялся, что починили).
Система опять перестала грузиться - удалил оксиген и дрова на видео, перезапустил - работает, поставил дрова и qtcurve - работало, но потом опять перестало и прежние пляски с бубном не помогают.
[quote=ddponedelnik]Но после обновления кед решил вернуться на oxygen(надеялся, что починили).
Система опять перестала грузиться - удалил оксиген и дрова на видео, перезапустил - работает, поставил дрова и qtcurve - работало, но потом опять перестало и прежние пляски с бубном не помогают.
Логи xorg чего говорят?
В systemsettings эффекты включены?[/quote]
эффекты включены
Это уже обнадёживает. Монитор в MCC установили правильно?
Будьте добры (под спойлер, конечно) /etc/X11/xorg.conf и /var/log/Xorg.0.log[/quote]
xorg.conf
Показать
# File generated by XFdrake (rev 262502)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
Section "ServerFlags"
Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection
Section "Module"
Load "v4l" # Video for Linux
EndSection
[ 25.800]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 25.800] X Protocol Version 11, Revision 0
[ 25.800] Build Operating System: Linux_2.6.38.8-server-10.mga Mageia
[ 25.800] Current Operating System: Linux localhost 3.3.8-desktop-2.mga2 #1 SMP Mon Jul 30 21:42:09 UTC 2012 i686
[ 25.800] Kernel command line: BOOT_IMAGE=/vmlinuz BOOT_IMAGE=linux root=UUID=32e2a3fe-0fcb-41dd-9d77-5a3ccc33b093 splash quiet nokmsboot resume=UUID=8fe36a16-3970-4cd5-b13a-a7a3a959e699 vga=788
[ 25.800] Build Date: 02 March 2012 06:41:02PM
[ 25.800]
[ 25.800] Current version of pixman: 0.24.4
[ 25.800] Before reporting problems, check http://bugs.mageia.org
to make sure that you have the latest version.
[ 25.800] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.809] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 10 00:43:18 2012
[ 25.809] (==) Using config file: "/etc/X11/xorg.conf"
[ 25.809] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 25.810] (==) ServerLayout "layout1"
[ 25.810] (**) |-->Screen "screen1" (0)
[ 25.810] (**) | |-->Monitor "monitor1"
[ 25.810] (**) | |-->Device "device1"
[ 25.810] (**) |-->Input Device "Stylus1"
[ 25.810] (**) |-->Input Device "Eraser1"
[ 25.810] (**) |-->Input Device "Cursor1"
[ 25.810] (**) |-->Input Device "Pad1"
[ 25.810] (**) |-->Input Device "Stylus2"
[ 25.810] (**) |-->Input Device "Eraser2"
[ 25.810] (**) |-->Input Device "Cursor2"
[ 25.810] (**) |-->Input Device "Pad2"
[ 25.810] (**) Option "DontZap" "False"
[ 25.810] (**) Option "AllowMouseOpenFail"
[ 25.810] (==) Automatically adding devices
[ 25.810] (==) Automatically enabling devices
[ 25.810] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 25.810] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 25.810] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.810] (II) Loader magic: 0x822a5a0
[ 25.810] (II) Module ABI versions:
[ 25.810] X.Org ANSI C Emulation: 0.4
[ 25.810] X.Org Video Driver: 11.0
[ 25.810] X.Org XInput driver : 13.0
[ 25.810] X.Org Server Extension : 6.0
[ 25.819] (--) PCI:*(0:3:0:0) 10de:0141:0000:0000 rev 162, Mem @ 0xd4000000/67108864, 0xb0000000/268435456, 0xd8000000/16777216, BIOS @ 0x????????/131072
[ 25.821] (II) Open ACPI successful (/var/run/acpid.socket)
[ 25.821] (II) "extmod" will be loaded by default.
[ 25.821] (II) "dbe" will be loaded by default.
[ 25.821] (II) "glx" will be loaded by default.
[ 25.821] (II) "record" will be loaded by default.
[ 25.821] (II) "dri" will be loaded by default.
[ 25.821] (II) "dri2" will be loaded by default.
[ 25.821] (II) LoadModule: "v4l"
[ 26.008] (II) Loading /usr/lib/xorg/modules/drivers/v4l_drv.so
[ 26.008] (II) Module v4l: vendor="X.Org Foundation"
[ 26.008] compiled for 1.11.2, module version = 0.1.1
[ 26.008] ABI class: X.Org Video Driver, version 11.0
[ 26.008] (II) LoadModule: "extmod"
[ 26.041] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 26.041] (II) Module extmod: vendor="X.Org Foundation"
[ 26.041] compiled for 1.11.4, module version = 1.0.0
[ 26.041] Module class: X.Org Server Extension
[ 26.041] ABI class: X.Org Server Extension, version 6.0
[ 26.041] (II) Loading extension MIT-SCREEN-SAVER
[ 26.041] (II) Loading extension XFree86-VidModeExtension
[ 26.041] (II) Loading extension XFree86-DGA
[ 26.041] (II) Loading extension DPMS
[ 26.041] (II) Loading extension XVideo
[ 26.041] (II) Loading extension XVideo-MotionCompensation
[ 26.041] (II) Loading extension X-Resource
[ 26.041] (II) LoadModule: "dbe"
[ 26.042] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 26.042] (II) Module dbe: vendor="X.Org Foundation"
[ 26.042] compiled for 1.11.4, module version = 1.0.0
[ 26.042] Module class: X.Org Server Extension
[ 26.042] ABI class: X.Org Server Extension, version 6.0
[ 26.042] (II) Loading extension DOUBLE-BUFFER
[ 26.042] (II) LoadModule: "glx"
[ 26.042] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[ 27.950] (II) Module glx: vendor="NVIDIA Corporation"
[ 27.950] compiled for 4.0.2, module version = 1.0.0
[ 27.950] Module class: X.Org Server Extension
[ 27.950] (II) NVIDIA GLX Module 295.71 Thu Aug 2 19:53:31 PDT 2012
[ 27.950] (II) Loading extension GLX
[ 27.950] (II) LoadModule: "record"
[ 27.952] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 27.952] (II) Module record: vendor="X.Org Foundation"
[ 27.952] compiled for 1.11.4, module version = 1.13.0
[ 27.952] Module class: X.Org Server Extension
[ 27.952] ABI class: X.Org Server Extension, version 6.0
[ 27.952] (II) Loading extension RECORD
[ 27.952] (II) LoadModule: "dri"
[ 27.953] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.953] (II) Module dri: vendor="X.Org Foundation"
[ 27.953] compiled for 1.11.4, module version = 1.0.0
[ 27.953] ABI class: X.Org Server Extension, version 6.0
[ 27.953] (II) Loading extension XFree86-DRI
[ 27.953] (II) LoadModule: "dri2"
[ 27.954] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.954] (II) Module dri2: vendor="X.Org Foundation"
[ 27.954] compiled for 1.11.4, module version = 1.2.0
[ 27.954] ABI class: X.Org Server Extension, version 6.0
[ 27.954] (II) Loading extension DRI2
[ 27.954] (II) LoadModule: "nvidia"
[ 27.954] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 27.955] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.955] compiled for 4.0.2, module version = 1.0.0
[ 27.955] Module class: X.Org Video Driver
[ 27.955] (II) LoadModule: "wacom"
[ 27.956] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 27.956] (II) Module wacom: vendor="X.Org Foundation"
[ 27.956] compiled for 1.11.4, module version = 0.13.0
[ 27.956] Module class: X.Org XInput Driver
[ 27.956] ABI class: X.Org XInput driver, version 13.0
[ 27.956] (II) v4l driver for Video4Linux
[ 27.956] (II) NVIDIA dlloader X Driver 295.71 Thu Aug 2 19:32:38 PDT 2012
[ 27.956] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 27.956] (++) using VT number 1
[ 27.956] (WW) Falling back to old probe method for v4l
[ 27.956] (II) Loading sub module "fb"
[ 27.956] (II) LoadModule: "fb"
[ 27.957] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.957] (II) Module fb: vendor="X.Org Foundation"
[ 27.957] compiled for 1.11.4, module version = 1.0.0
[ 27.957] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.957] (II) Loading sub module "wfb"
[ 27.957] (II) LoadModule: "wfb"
[ 27.958] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.958] (II) Module wfb: vendor="X.Org Foundation"
[ 27.958] compiled for 1.11.4, module version = 1.0.0
[ 27.958] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.958] (II) Loading sub module "ramdac"
[ 27.958] (II) LoadModule: "ramdac"
[ 27.958] (II) Module "ramdac" already built-in
[ 27.958] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 27.958] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.958] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.959] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 27.959] (==) NVIDIA(0): RGB weight 888
[ 27.959] (==) NVIDIA(0): Default visual is TrueColor
[ 27.959] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.959] (**) NVIDIA(0): Option "AddARGBGLXVisuals"
[ 27.959] (**) NVIDIA(0): Option "DynamicTwinView" "false"
[ 27.959] (**) NVIDIA(0): Enabling 2D acceleration
[ 30.163] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-0 is invalid:
[ 30.163] (WW) NVIDIA(GPU-0): unrecognized EDID Header.
[ 30.163] (--) NVIDIA(GPU-0):
[ 30.163] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 30.163] (--) NVIDIA(GPU-0):
[ 30.163] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.163] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.164] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.164] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.164] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.164] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.164] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.164] (--) NVIDIA(GPU-0): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.164] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.164] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.164] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.164] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.164] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.164] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.164] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.164] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.164] (--) NVIDIA(GPU-0):
[ 30.169] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 (NV43) at PCI:3:0:0 (GPU-0)
[ 30.169] (--) NVIDIA(0): Memory: 262144 kBytes
[ 30.169] (--) NVIDIA(0): VideoBIOS: 05.43.02.57.00
[ 30.169] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.169] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.169] (--) NVIDIA(0): Connected display device(s) on GeForce 6600 at PCI:3:0:0
[ 30.169] (--) NVIDIA(0): CRT-0
[ 30.169] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 30.169] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.169] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 30.169] (**) NVIDIA(0): all display devices.)
[ 30.170] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 30.170] (WW) NVIDIA(0): No valid modes for "1152x864"; removing.
[ 30.170] (WW) NVIDIA(0): No valid modes for "832x624"; removing.
[ 30.170] (WW) NVIDIA(0): No valid modes for "480x360"; removing.
[ 30.170] (II) NVIDIA(0): Validated modes:
[ 30.170] (II) NVIDIA(0): "1280x1024"
[ 30.170] (II) NVIDIA(0): "1024x768"
[ 30.170] (II) NVIDIA(0): "800x600"
[ 30.170] (II) NVIDIA(0): "640x480"
[ 30.170] (II) NVIDIA(0): "320x240"
[ 30.170] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 30.173] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 30.173] (WW) NVIDIA(0): from CRT-0's EDID.
[ 30.173] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 30.173] (**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 30.173] (--) Depth 24 pixmap format is 32 bpp
[ 30.192] (II) NVIDIA(0): Setting mode "1280x1024"
[ 30.406] (II) Loading extension NV-GLX
[ 30.434] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 30.434] (==) NVIDIA(0): Backing store disabled
[ 30.434] (==) NVIDIA(0): Silken mouse enabled
[ 30.434] (**) NVIDIA(0): DPMS enabled
[ 30.434] (II) Loading extension NV-CONTROL
[ 30.435] (II) Loading extension XINERAMA
[ 30.435] (II) Loading sub module "dri2"
[ 30.435] (II) LoadModule: "dri2"
[ 30.436] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.436] (II) Module dri2: vendor="X.Org Foundation"
[ 30.436] compiled for 1.11.4, module version = 1.2.0
[ 30.436] ABI class: X.Org Server Extension, version 6.0
[ 30.436] (II) NVIDIA(0): [DRI2] Setup complete
[ 30.436] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 30.436] (==) RandR enabled
[ 30.436] (II) Initializing built-in extension Generic Event Extension
[ 30.436] (II) Initializing built-in extension SHAPE
[ 30.436] (II) Initializing built-in extension MIT-SHM
[ 30.436] (II) Initializing built-in extension XInputExtension
[ 30.436] (II) Initializing built-in extension XTEST
[ 30.436] (II) Initializing built-in extension BIG-REQUESTS
[ 30.436] (II) Initializing built-in extension SYNC
[ 30.436] (II) Initializing built-in extension XKEYBOARD
[ 30.436] (II) Initializing built-in extension XC-MISC
[ 30.436] (II) Initializing built-in extension SECURITY
[ 30.436] (II) Initializing built-in extension XINERAMA
[ 30.436] (II) Initializing built-in extension XFIXES
[ 30.436] (II) Initializing built-in extension XFree86-Bigfont
[ 30.436] (II) Initializing built-in extension RENDER
[ 30.436] (II) Initializing built-in extension RANDR
[ 30.436] (II) Initializing built-in extension COMPOSITE
[ 30.436] (II) Initializing built-in extension DAMAGE
[ 30.440] (II) Initializing extension GLX
[ 30.521] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
[ 30.559] (II) Using input driver 'wacom' for 'Stylus1'
[ 30.559] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 30.559] (**) Option "SendCoreEvents"
[ 30.559] (**) Stylus1: always reports core events
[ 30.559] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._CTL-470-event-mouse"
[ 30.559] (**) Option "Type" "stylus"
[ 30.559] (--) Stylus1: using pressure threshold of 27 for button 1
[ 30.559] (--) Stylus1: Wacom Unknown USB tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=enabled
[ 30.560] (II) XINPUT: Adding extended input device "Stylus1" (type: STYLUS, id 6)
[ 30.560] (**) Stylus1: (accel) keeping acceleration scheme 1
[ 30.560] (**) Stylus1: (accel) acceleration profile 0
[ 30.560] (**) Stylus1: (accel) acceleration factor: 2.000
[ 30.560] (**) Stylus1: (accel) acceleration threshold: 4
[ 30.560] (II) Using input driver 'wacom' for 'Eraser1'
[ 30.560] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 30.560] (**) Option "SendCoreEvents"
[ 30.560] (**) Eraser1: always reports core events
[ 30.560] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._CTL-470-event-mouse"
[ 30.560] (**) Option "Type" "eraser"
[ 30.562] (--) Eraser1: Wacom Unknown USB tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=enabled
[ 30.563] (II) XINPUT: Adding extended input device "Eraser1" (type: ERASER, id 7)
[ 30.564] (**) Eraser1: (accel) keeping acceleration scheme 1
[ 30.564] (**) Eraser1: (accel) acceleration profile 0
[ 30.564] (**) Eraser1: (accel) acceleration factor: 2.000
[ 30.564] (**) Eraser1: (accel) acceleration threshold: 4
[ 30.564] (II) Using input driver 'wacom' for 'Cursor1'
[ 30.564] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 30.564] (**) Option "SendCoreEvents"
[ 30.564] (**) Cursor1: always reports core events
[ 30.564] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._CTL-470-event-mouse"
[ 30.564] (**) Option "Type" "cursor"
[ 30.564] (--) Cursor1: Wacom Unknown USB tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=enabled
[ 30.564] (II) XINPUT: Adding extended input device "Cursor1" (type: CURSOR, id 8)
[ 30.564] (**) Cursor1: (accel) keeping acceleration scheme 1
[ 30.564] (**) Cursor1: (accel) acceleration profile 0
[ 30.564] (**) Cursor1: (accel) acceleration factor: 2.000
[ 30.564] (**) Cursor1: (accel) acceleration threshold: 4
[ 30.565] (II) Using input driver 'wacom' for 'Pad1'
[ 30.565] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 30.565] (**) Option "SendCoreEvents"
[ 30.565] (**) Pad1: always reports core events
[ 30.565] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._CTL-470-event-mouse"
[ 30.565] (**) Option "Type" "pad"
[ 30.565] (--) Pad1: Wacom Unknown USB tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=enabled
[ 30.565] (II) XINPUT: Adding extended input device "Pad1" (type: PAD, id 9)
[ 30.565] (**) Pad1: (accel) keeping acceleration scheme 1
[ 30.565] (**) Pad1: (accel) acceleration profile 0
[ 30.565] (**) Pad1: (accel) acceleration factor: 2.000
[ 30.565] (**) Pad1: (accel) acceleration threshold: 4
[ 30.565] (II) Using input driver 'wacom' for 'Stylus2'
[ 30.565] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 30.565] (**) Option "SendCoreEvents"
[ 30.565] (**) Stylus2: always reports core events
[ 30.565] (**) Option "Device" "/dev/input/by-id/usb-Wacom_Co._Ltd._CTL-470-event-mouse"
[ 30.565] (**) Option "Type" "stylus"
[ 30.565] (EE) Stylus2: already have a tool with type/serial 1/0.(EE) PreInit returned 8 for "Stylus2"
монитор тот что и в мандриве был давно еще и всегда работал
Нет, в настройках MCC Вы его прописали верно? Потому, что сочетание GeForce 6600 и FlatPanel наводит на размышления. Монитор у Вас какой? Не ноутбук же с 6600!
[quote=ddponedelnik]монитор тот что и в мандриве был давно еще и всегда работал
Нет, в настройках MCC Вы его прописали верно? Потому, что сочетание GeForce 6600 и FlatPanel наводит на размышления. Монитор у Вас какой? Не ноутбук же с 6600![/quote]
Сейчас комп опять запустился и пишу из-под Магеи
Монитор работает в своем штатном режиме 1280х1024
Монитор китайский ноунейм жк
[quote=karl_muenhgausen][quote=ddponedelnik]монитор тот что и в мандриве был давно еще и всегда работал
Нет, в настройках MCC Вы его прописали верно? Потому, что сочетание GeForce 6600 и FlatPanel наводит на размышления. Монитор у Вас какой? Не ноутбук же с 6600![/quote]
Сейчас комп опять запустился и пишу из-под Магеи
Монитор работает в своем штатном режиме 1280х1024
Монитор китайский ноунейм жк[/quote]
Третий раз спрашиваю - в MCC монитор прописали правильно?
Нет, в настройках MCC Вы его прописали верно? Потому, что сочетание GeForce 6600 и FlatPanel наводит на размышления. Монитор у Вас какой? Не ноутбук же с 6600!
Сейчас комп опять запустился и пишу из-под Магеи
Монитор работает в своем штатном режиме 1280х1024
Монитор китайский ноунейм жк[/quote]
Третий раз спрашиваю - в MCC монитор прописали правильно?[/quote]
Да.
По всем признакам всё должно работать (у самого Mageia + GeForce 6600). Конечно можно грешить на тему KDM (отменить тему, сменить оформление), но подозреваю, что всё проще - при отключенном планшете грузиться будет всегда. Попробуйте подключать его после загрузки. Впрочем, и прочие USB. Если это решение, то вопрос не к ОС, а к мамке.
