TV-тюнер USB Pinnacle 320e - нет звука (Sabayon)

dmesg

lsusb

aplay -l

egrep SND_USB /usr/src/linux/.config

grep  ALSA_CARDS /etc/make.conf

# dmesg
idge window [mem pref disabled]
[    0.389386] pci 0000:00:14.4: PCI bridge to [bus 08-0a]
[    0.389391] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.389399] pci 0000:00:14.4:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.389406] pci 0000:00:14.4:   bridge window [mem 0xf0300000-0xf03fffff pref]
[    0.389427] pci 0000:00:05.0: setting latency timer to 64
[    0.389435] pci 0000:00:06.0: setting latency timer to 64
[    0.389446] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.389449] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.389453] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.389456] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[    0.389460] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.389464] pci_bus 0000:05: resource 1 [mem 0xc0200000-0xc02fffff]
[    0.389468] pci_bus 0000:08: resource 0 [io  0xa000-0xafff]
[    0.389472] pci_bus 0000:08: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.389475] pci_bus 0000:08: resource 2 [mem 0xf0300000-0xf03fffff pref]
[    0.389479] pci_bus 0000:08: resource 4 [io  0x0000-0xffff]
[    0.389482] pci_bus 0000:08: resource 5 [mem 0x00000000-0xffffffff]
[    0.389513] NET: Registered protocol family 2
[    0.389563] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.389718] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.391231] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.391962] TCP: Hash tables configured (established 131072 bind 65536)
[    0.391965] TCP reno registered
[    0.391969] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.391994] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.392122] NET: Registered protocol family 1
[    0.392248] RPC: Registered udp transport module.
[    0.392250] RPC: Registered tcp transport module.
[    0.392253] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.392383] pci 0000:01:05.0: Boot video device
[    0.392394] PCI: CLS 32 bytes, default 64
[    0.392472] Trying to unpack rootfs image as initramfs...
[    0.598475] Freeing initrd memory: 7848k freed
[    0.607889] audit: initializing netlink socket (disabled)
[    0.607909] type=2000 audit(1300101044.606:1): initialized
[    0.608077] highmem bounce pool size: 64 pages
[    0.608083] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.613639] VFS: Disk quotas dquot_6.5.2
[    0.613755] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.615155] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.616734] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.617555] NTFS driver 2.1.29 [Flags: R/W].
[    0.617841] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.618047] QNX4 filesystem 0.2.3 registered.
[    0.618121] fuse init (API version 7.15)
[    0.618632] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.626110] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.627382] SGI XFS Quota Management subsystem
[    0.627858] Btrfs loaded
[    0.628161] aufs 2.1-standalone.tree-37-rcN-20101220
[    0.628169] msgmni has been set to 1728
[    0.628650] async_tx: api initialized (async)
[    0.628731] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.628769] io scheduler noop registered
[    0.628773] io scheduler deadline registered (default)
[    0.629210] pcieport 0000:00:05.0: ACPI _OSC control granted for 0x1d
[    0.629224] pcieport 0000:00:05.0: setting latency timer to 64
[    0.629273] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[    0.629385] pcieport 0000:00:06.0: ACPI _OSC control granted for 0x1d
[    0.629395] pcieport 0000:00:06.0: setting latency timer to 64
[    0.629435] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    0.629682] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[    0.629688] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[    0.629712] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[    0.629716] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.629721] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[    0.630130] hpet_acpi_add: no address or irqs in _CRS
[    0.630192] toshiba: not a supported Toshiba laptop
[    0.630324] Linux agpgart interface v0.103
[    0.630665] vesafb: framebuffer at 0xd0000000, mapped to 0xf8580000, using 1536k, total 1536k
[    0.630670] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    0.630673] vesafb: scrolling: redraw
[    0.630677] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.646894] Console: switching to colour frame buffer device 128x48
[    0.811560] fbcondecor: console 0 using theme 'sabayon'
[    0.883677] fbcondecor: switched decor state to 'on' on console 0
[    0.884611] fb0: VESA VGA frame buffer device
[    0.884739] intel_idle: MWAIT substates: 0x22220
[    0.884742] intel_idle: does not run on family 6 model 14
[    0.885010] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.885019] ACPI: Power Button [PWRB]
[    0.885144] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.885216] ACPI: Lid Switch [LID0]
[    0.885329] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.885335] ACPI: Sleep Button [SLPB]
[    0.885477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.885481] ACPI: Power Button [PWRF]
[    0.885616] ACPI: acpi_idle registered with cpuidle
[    0.888220] Marking TSC unstable due to TSC halts in idle
[    0.888284] Switching to clocksource acpi_pm
[    0.891441] ACPI: Invalid active0 threshold
[    0.891819] thermal LNXTHERM:00: registered as thermal_zone0
[    0.891822] ACPI: Thermal Zone [TZ00] (63 C)
[    0.892105] thermal LNXTHERM:01: registered as thermal_zone1
[    0.892109] ACPI: Thermal Zone [TZ01] (27 C)
[    0.892174] ERST: Table is not found!
[    0.892201] isapnp: Scanning for PnP cards...
[    1.205380] isapnp: No Plug & Play device found
[    1.341929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.406069] floppy0: no floppy controllers found
[    4.409757] brd: module loaded
[    4.411528] loop: module loaded
[    4.411531] Compaq SMART2 Driver (v 2.6.0)
[    4.411684] HP CISS Driver (v 3.6.26)
[    4.412392] MM: desc_per_page = 128
[    4.412811] Loading iSCSI transport class v2.0-870.
[    4.413690] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[    4.416356] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    4.416359] Detecting Adaptec I2O RAID controllers...
[    4.417878] Adaptec aacraid driver 1.1-5[26400]-ms
[    4.418261] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    4.419605] NCR53c406a: no available ports found
[    4.419610] sym53c416.c: Version 1.0.0-ac
[    4.419631] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[    4.419732] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[    4.419903] iscsi: registered transport (qla4xxx)
[    4.419976] QLogic iSCSI HBA Driver
[    4.419978] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[    4.419981] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    4.442043] Failed initialization of WD-7000 SCSI card!
[    4.881527] DC390: clustering now enabled by default. If you get problems load
[    4.881530]        with "disable_clustering=1" and report to maintainers
[    4.881692] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    4.881818] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    4.881899] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[    4.881988] mpt2sas version 06.100.00.00 loaded
[    4.882269] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    4.882501] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    4.882578] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.882660] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    4.882742] nsp32: loading...
[    4.882820] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[    4.882905] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[    4.882985] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    4.883164] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[    4.883169] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[    4.883172] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[    4.883257] iscsi: registered transport (cxgb3i)
[    4.883260] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[    4.883346] iscsi: registered transport (cxgb4i)
[    4.883349] Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
[    4.883435] iscsi: registered transport (bnx2i)
[    4.883440] VMware PVSCSI driver - version 1.0.1.0-k
[    4.883523] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[    4.883672] osst :I: Tape driver with OnStream support version 0.99.4
[    4.883674] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    4.884165] ahci 0000:00:12.0: version 3.0
[    4.884193] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    4.884223] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    4.884339] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    4.884345] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc 
[    4.886240] scsi2 : ahci
[    4.886544] scsi3 : ahci
[    4.886773] scsi4 : ahci
[    4.886996] scsi5 : ahci
[    4.887358] ata1: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004100 irq 22
[    4.887364] ata2: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004180 irq 22
[    4.887369] ata3: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004200 irq 22
[    4.887373] ata4: SATA max UDMA/133 abar m1024@0xc0004000 port 0xc0004280 irq 22
[    4.889120] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.889163] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    4.890107] scsi6 : pata_atiixp
[    4.890330] scsi7 : pata_atiixp
[    4.891340] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[    4.891344] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[    4.895418] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010)
[    4.895653] I2O subsystem v1.325
[    4.895657] i2o: max drivers = 8
[    4.895906] I2O Configuration OSM v1.323
[    4.896171] I2O Bus Adapter OSM v1.317
[    4.896236] I2O Block Device OSM v1.325
[    4.896493] I2O SCSI Peripheral OSM v1.316
[    4.896557] I2O ProcFS OSM v1.316
[    4.896628] Fusion MPT base driver 3.04.17
[    4.896630] Copyright (c) 1999-2008 LSI Corporation
[    4.896638] Fusion MPT SPI Host driver 3.04.17
[    4.896718] Fusion MPT FC Host driver 3.04.17
[    4.896800] Fusion MPT SAS Host driver 3.04.17
[    4.896883] Fusion MPT misc device (ioctl) driver 3.04.17
[    4.896991] mptctl: Registered with Fusion MPT base driver
[    4.896994] mptctl: /dev/mptctl @ (major,minor=10,220)
[    4.896998] Fusion MPT LAN driver 3.04.17
[    4.897150] usbmon: debugfs is not available
[    4.897153] Initializing USB Mass Storage driver...
[    4.897228] usbcore: registered new interface driver usb-storage
[    4.897230] USB Mass Storage support registered.
[    4.897301] usbcore: registered new interface driver libusual
[    4.897369] usbcore: registered new interface driver ums-alauda
[    4.897437] usbcore: registered new interface driver ums-cypress
[    4.897504] usbcore: registered new interface driver ums-datafab
[    4.897573] usbcore: registered new interface driver ums-freecom
[    4.897640] usbcore: registered new interface driver ums-isd200
[    4.897707] usbcore: registered new interface driver ums-jumpshot
[    4.897779] usbcore: registered new interface driver ums-karma
[    4.897852] usbcore: registered new interface driver ums-onetouch
[    4.897919] usbcore: registered new interface driver ums-sddr09
[    4.897986] usbcore: registered new interface driver ums-sddr55
[    4.898105] usbcore: registered new interface driver ums-usbat
[    4.898277] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    4.901445] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.902888] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.902897] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.902901] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.902906] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.902910] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.903337] mice: PS/2 mouse device common for all mice
[    4.907148] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    4.907177] rtc0: alarms up to one month, 114 bytes nvram
[    4.907244] md: linear personality registered for level -1
[    4.907247] md: raid0 personality registered for level 0
[    4.907251] md: raid1 personality registered for level 1
[    4.907253] md: raid10 personality registered for level 10
[    4.907256] md: raid6 personality registered for level 6
[    4.907259] md: raid5 personality registered for level 5
[    4.907262] md: raid4 personality registered for level 4
[    4.907265] md: multipath personality registered for level -4
[    4.907268] md: faulty personality registered for level -5
[    4.907640] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[    4.907882] EDAC MC: Ver: 2.1.0 Mar  8 2011
[    4.908294] EISA: Probing bus 0 at eisa.0
[    4.908337] Cannot allocate resource for EISA slot 8
[    4.908339] EISA: Detected 0 cards.
[    4.908827] cpuidle: using governor ladder
[    4.909600] cpuidle: using governor menu
[    4.909814] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    4.913176] usbcore: registered new interface driver usbhid
[    4.913179] usbhid: USB HID core driver
[    4.913800] TCP bic registered
[    4.913805] NET: Registered protocol family 17
[    4.913930] Registering the dns_resolver key type
[    4.914651] Using IPI No-Shortcut mode
[    4.915136] TuxOnIce 3.2-rc2 (http://tuxonice.net)
[    4.927016] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    5.045558] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC04, max UDMA/33
[    5.051497] ata5.00: configured for UDMA/33
[    5.192104] ata3: SATA link down (SStatus 0 SControl 300)
[    5.192140] ata4: SATA link down (SStatus 0 SControl 300)
[    5.192178] ata2: SATA link down (SStatus 0 SControl 300)
[    5.347036] ata1: softreset failed (device not ready)
[    5.347045] ata1: applying SB600 PMP SRST workaround and retrying
[    5.502058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.502698] ata1.00: ATA-8: FUJITSU MHW2080BH, 00000012, max UDMA/100
[    5.502702] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.502707] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.503476] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    5.503480] ata1.00: configured for UDMA/100
[    5.503679] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHW2080B 0000 PQ: 0 ANSI: 5
[    5.504191] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    5.504249] sd 2:0:0:0: [sda] Write Protect is off
[    5.504253] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.504277] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.504342] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    5.510429] scsi 6:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D SC04 PQ: 0 ANSI: 5
[    5.541295] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.541300] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.541597] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    5.541874] sr 6:0:0:0: Attached scsi generic sg1 type 5
[    5.588912]  sda: sda1 sda2 sda3
[    5.589793] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.589831] TuxOnIce: Can't translate "/dev/mapper/vg_lukazoids-lv_swap" into a device id yet.
[    5.743850] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000/0x0
[    5.780208] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[    5.782958] registered taskstats version 1
[    5.783297] rtc_cmos 00:04: setting system clock to 2011-03-14 11:10:51 UTC (1300101051)
[    5.783449] Freeing unused kernel memory: 640k freed
[    6.578786] scsi: <fdomain> Detection failed (no card)
[    6.666509] imm: Version 2.05 (for Linux 2.4.0)
[    6.781769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.781847] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    6.781868] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    6.781900] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[    6.783079] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    6.783099] ehci_hcd 0000:00:13.5: debug port 1
[    6.783131] ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400
[    6.789062] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    6.789521] hub 1-0:1.0: USB hub found
[    6.789528] hub 1-0:1.0: 10 ports detected
[    6.828431] uhci_hcd: USB Universal Host Controller Interface driver
[    6.859888] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.859944] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.859964] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    6.859979] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    6.861084] ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000
[    6.912507] hub 2-0:1.0: USB hub found
[    6.912516] hub 2-0:1.0: 2 ports detected
[    6.912769] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.912785] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    6.912795] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    6.915096] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
[    6.966395] hub 3-0:1.0: USB hub found
[    6.966404] hub 3-0:1.0: 2 ports detected
[    6.966620] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.966634] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    6.966644] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    6.969080] ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000
[    7.020392] hub 4-0:1.0: USB hub found
[    7.020401] hub 4-0:1.0: 2 ports detected
[    7.020633] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.020647] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    7.020657] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[    7.023071] ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000
[    7.074399] hub 5-0:1.0: USB hub found
[    7.074408] hub 5-0:1.0: 2 ports detected
[    7.074623] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    7.074637] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    7.074646] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[    7.077070] ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000
[    7.091060] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    7.128387] hub 6-0:1.0: USB hub found
[    7.128396] hub 6-0:1.0: 2 ports detected
[    7.161856] sl811: driver sl811-hcd, 19 May 2005
[    7.277637] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    7.277642] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    7.355641] iscsi: registered transport (tcp)
[    7.365044] usb 1-3: new high speed USB device using ehci_hcd and address 4
[    7.482043] scsi8 : usb-storage 1-3:1.0
[    7.584052] usb 1-6: new high speed USB device using ehci_hcd and address 5
[    7.700617] scsi9 : usb-storage 1-6:1.0
[    7.928050] usb 2-2: new low speed USB device using ohci_hcd and address 2
[    8.085466] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input6
[    8.086037] generic-usb 0003:1267:0201.0001: input,hidraw0: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:00:13.0-2/input0
[    8.482720] scsi 8:0:0:0: Direct-Access     SAMSUNG  HM641JI               PQ: 0 ANSI: 2 CCS
[    8.700964] scsi 9:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
[    8.702749] sd 9:0:0:0: Attached scsi generic sg3 type 0
[    8.704080] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[   30.899461] TuxOnIce: No image found.
[   30.927813] EXT3-fs (dm-0): error: couldn't mount because of unsupported optional features (240)
[   30.928033] EXT2-fs (dm-0): error: couldn't mount because of unsupported optional features (240)
[   30.954392] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   35.613718] udev: starting version 154
[   35.613804] udevd (4894): /proc/4894/oom_adj is deprecated, please use /proc/4894/oom_score_adj instead.
[   35.958688] ACPI: AC Adapter [ADP1] (on-line)
[   35.966414] ACPI: Battery Slot [BAT1] (battery present)
[   35.969333] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   35.969393] 8139cp 0000:08:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   36.002959] 8139too: 8139too Fast Ethernet driver 0.9.28
[   36.003069] 8139too 0000:08:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   36.003785] 8139too 0000:08:05.0: eth0: RealTek RTL8139 at 0xf8b14000, 00:13:77:48:84:d7, IRQ 22
[   36.005565] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   36.040579] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   36.065195] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   36.066728] acpi device:1f: registered as cooling_device2
[   36.067190] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input8
[   36.067417] ACPI: Video Device [ATIM] (multi-head: yes  rom: no  post: no)
[   36.166323] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   36.282362] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[   36.303515] cfg80211: Calling CRDA to update world regulatory domain
[   36.633497] IR NEC protocol handler initialized
[   36.662683] IR RC5(x) protocol handler initialized
[   36.679660] IR RC6 protocol handler initialized
[   36.683091] IR JVC protocol handler initialized
[   36.711289] IR Sony protocol handler initialized
[   36.722985] Linux video capture interface: v2.00
[   36.793474] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   36.858316] lirc_dev: IR Remote Control driver registered, major 245 
[   36.872611] ath5k 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   36.872624] ath5k 0000:05:00.0: setting latency timer to 64
[   36.872685] ath5k 0000:05:00.0: registered as 'phy0'
[   36.887908] IR LIRC bridge handler initialized
[   36.952366] hda_codec: ALC262: BIOS auto-probing.
[   36.952933] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[   36.959490] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   37.097474] em28xx: New device USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
[   37.097618] em28xx #0: chip ID is em2882/em2883
[   37.361562] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[   37.361577] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[   37.361590] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[   37.361602] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[   37.361615] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   37.361627] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   37.361639] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[   37.361652] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[   37.361664] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[   37.361676] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   37.361689] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   37.361701] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   37.361713] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   37.361725] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   37.361738] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
[   37.361750] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[   37.361764] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
[   37.361767] em28xx #0: EEPROM info:
[   37.361769] em28xx #0:    AC97 audio (5 sample rates)
[   37.361772] em28xx #0:    USB Remote wakeup capable
[   37.361774] em28xx #0:    500mA max power
[   37.361777] em28xx #0:    Table at 0x04, strings=0x206a, 0x006a, 0x0000
[   37.363485] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[   37.363490] em28xx #0: Your board has no unique USB ID.
[   37.363493] em28xx #0: A hint were successfully done, based on eeprom hash.
[   37.363496] em28xx #0: This method is not 100% failproof.
[   37.363498] em28xx #0: If the board were missdetected, please email this log to:
[   37.363501] em28xx #0:     V4L Mailing List  <linux-media@vger.kernel.org>
[   37.363505] [b]em28xx #0: Board detected as Pinnacle Hybrid Pro[/b]
[   37.540808] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0)
[   37.695058] tuner 1-0061: chip found @ 0xc2 (em28xx #0)
[   37.838371] xc2028 1-0061: creating new instance
[   37.838376] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[   37.873025] ath: EEPROM regdomain: 0x65
[   37.873028] ath: EEPROM indicates we should expect a direct regpair map
[   37.873033] ath: Country alpha2 being used: 00
[   37.873036] ath: Regpair used: 0x65
[   37.876049] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   37.876273] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa0, PHY: 0x61)
[   37.880074] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   37.920036] xc2028 1-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[   38.797755] xc2028 1-0061: Loading firmware for type=(0), id 000000000000b700.
[   38.811375] SCODE (20000000), id 000000000000b700:
[   38.811380] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[   38.927114] em28xx #0: Config register raw data: 0x58
[   38.927866] em28xx #0: AC97 vendor ID = 0xffffffff
[   38.928239] em28xx #0: AC97 features = 0x6a90
[   38.928241] em28xx #0: Empia 202 AC97 audio processor detected
[   39.013490] tvp5150 1-005c: tvp5150am1 detected.
[   39.102877] em28xx #0: v4l2 driver version 0.1.2
[   39.143056] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   40.020757] (0), id 00000000000000ff:
[   40.020760] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007.
[   40.034380] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   40.209493] em28xx #0: V4L2 video device registered as video0
[   40.209496] em28xx #0: V4L2 VBI device registered as vbi0
[   40.210049] em28xx audio device (eb1a:2881): interface 1, class 1
[   40.210062] em28xx audio device (eb1a:2881): interface 2, class 1
[   40.210393] usbcore: registered new interface driver em28xx
[   40.210397] em28xx driver loaded
[   40.352590] usbcore: registered new interface driver snd-usb-audio
[   40.613391] xc2028 1-0061: attaching existing instance
[   40.613396] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[   40.613399] em28xx #0: em28xx #0/2: xc3028 attached
[   40.613402] DVB: registering new adapter (em28xx #0)
[   40.613407] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[   40.614079] em28xx #0: Successfully loaded em28xx-dvb
[   40.614083] Em28xx: Initialized (Em28xx dvb Extension) extension
[   43.006767] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   43.226626] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   53.549351] eth0: link down
[   54.211991] fbcondecor: console 1 using theme 'sabayon'
[   54.227245] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   54.348528] fbcondecor: switched decor state to 'on' on console 1
[   54.380701] [drm] Initialized drm 1.1.0 20060810
[   54.473209] [drm] radeon defaulting to userspace modesetting.
[   54.475655] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
[   54.493102] fbcondecor: console 2 using theme 'sabayon'
[   54.629200] fbcondecor: switched decor state to 'on' on console 2
[   54.769522] fbcondecor: console 3 using theme 'sabayon'
[   54.905818] fbcondecor: switched decor state to 'on' on console 3
[   55.046349] fbcondecor: console 4 using theme 'sabayon'
[   55.150970] [drm] Setting GART location based on new memory map
[   55.153049] [drm] Loading RS600 Microcode
[   55.192401] [drm] Num pipes: 1
[   55.192411] [drm] writeback test succeeded in 1 usecs
[   55.194868] fbcondecor: switched decor state to 'on' on console 4
[   55.336759] fbcondecor: console 5 using theme 'sabayon'
[   55.474353] fbcondecor: switched decor state to 'on' on console 5
[   57.453327] NET: Registered protocol family 10
[   57.453698] lo: Disabled Privacy Extensions
[   57.453803] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   61.564270] Adding 2588668k swap on /dev/mapper/vg_lukazoids-lv_swap.  Priority:-1 extents:1 across:2588668k 
[  133.117202] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[  133.118421] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[  133.118426] ata1.00: configured for UDMA/100
[  133.118431] ata1: EH complete
[  150.664406] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[  151.323364] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 9476.560444] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 9476.560659] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9487.378042] eth0: no IPv6 routers present
[ 9495.913771] PPP generic driver version 2.4.2
[ 9497.009455] PPP BSD Compression module registered
[ 9497.015818] PPP Deflate Compression module registered
[15033.137473] tvp5150 1-005c: tvp5150am1 detected.
[15033.323075] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[15034.219743] (0), id 0000000000ff0000:
[15034.219748] xc2028 1-0061: Loading firmware for type=(0), id 0000000000200000.
[15034.233614] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_6320 (60008000), id 0000000000200000.

# lsusb
Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 002: ID eb1a:2881 eMPIA Technology, Inc. EM2881 Video Controller
Bus 001 Device 004: ID 18a5:022b Verbatim, Ltd 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1267:0201 Logic3 / SpectraVideo plc A4Tech SWOP-3 Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

 aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC262 Analog [ALC262 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

egrep SND_USB /usr/src/linux/.config
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m

grep  ALSA_CARDS /etc/make.conf
ALSA_CARDS="emu10k1x darla20 darla24 emu10k1 gina20 gina24 hdsp hdspm ice1712 indigo indigoio layla20 layla24 mia mixart mona pcxhr rme32 rme96 sb16 sbawe sscape usbusx2y vx222 usb-usx2y"

emerge -auDNv world

modprobe snd-usb-audio

emerge -pv media-sound/alsa-driver

id

# emerge -pv media-sound/alsa-driver
These are the packages that would be merged, in order:
Calculating dependencies... done!
emerge: there are no ebuilds to satisfy "media-sound/alsa-driver".

~/Desktop $ id
uid=1000(lukazoid) gid=1001(lukazoid) группы=1001(lukazoid),6(disk),7(lp),10(wheel),14(uucp),17(console),18(audio),19(cdrom),27(video),35(games),80(cdrw),85(usb),100(users),104(vboxguest),106(lpadmin),250(portage),410(messagebus),411(haldaemon),441(scanner),442(plugdev),1000(entropy),1019(polkituser),1022(pulse-access),1023(pulse)

ls -l /dev/dvb

# ls -l /dev/dvb
итого 0
drwxr-xr-x 2 root root 120 Мар 14 10:11 adapter0

ls -l /dev/dvb/adapter0

 # ls -l /dev/dvb/adapter0
итого 0
crw-rw---- 1 root video 212, 4 Мар 14 10:11 demux0
crw-rw---- 1 root video 212, 5 Мар 14 10:11 dvr0
crw-rw---- 1 root video 212, 3 Мар 14 10:11 frontend0
crw-rw---- 1 root video 212, 7 Мар 14 10:11 net0

 # emerge -auDNv world
These are the packages that would be merged, in order:
Calculating dependencies... done!
!!! Ebuilds for the following packages are either all
!!! masked or don't exist:
virtual/pager
emerge: there are no ebuilds to satisfy ">=dev-lang/python-2.6[xml]".
(dependency required by "app-portage/gentoolkit-0.3.0_rc10-r1" [installed])
(dependency required by "@selected")
(dependency required by "@world" [argument])

#! /bin/bash
mplayer tv://"R6" -tv driver=v4l2:device=/dev/video0:chanlist=europe-east:alsa:adevice=hw.2:amode=1:forceaudio:volume=100:immediatemode=0:norm=secam:brightness=30

tv=driver=v4l2:chanlist=russia:outfmt=YV12:fps=25:width=720:height=576:immediatemode=0:buffersize=512:audiorate=32000:volume=100:forceaudio=1:forcechan=2:amode=1:input=0:normid=14 

# emerge -av sox
These are the packages that would be merged, in order:
Calculating dependencies... done!
emerge: there are no ebuilds to satisfy "sox".
LukazoidS Desktop # equo search sox
>>  @@ Поиск...
>>      @@ Пакет: media-sound/sox-14.3.1 ветка: 5, [sabayonlinux.org] 
>>         Доступно:            версия: 14.3.1 ~ tag: NoTag ~ версия: 1
>>         Установлено:         версия: 14.3.1 ~ tag: NoTag ~ версия: 1
>>         Слот:                0
>>         Домашняя страница:   http://sox.sourceforge.net 
>>         Описание:            The swiss army knife of sound processing 
>>                              programs 
>>         Лицензия:            LGPL-2.1
>>  Ключевые слова:  sox

# sox -c 2 -s -w -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -w -r 32000 /dev/dsp
sox: invalid option -- w
sox: SoX v14.3.1
sox FAIL sox: invalid option
Usage summary: [gopts] [[fopts] infile]... [fopts] outfile [effect [effopt]]...
SPECIAL FILENAMES (infile, outfile):
-                        Pipe/redirect input/output (stdin/stdout); may need -t
-d, --default-device     Use the default audio device (where available)
-n, --null               Use the `null' file handler; e.g. with synth effect
-p, --sox-pipe           Alias for `-t sox -'
SPECIAL FILENAMES (infile only):
"|program [options] ..." Pipe input from external program (where supported)
http://server/file       Use the given URL as input file (where supported)
GLOBAL OPTIONS (gopts) (can be specified at any point before the first effect):
--buffer BYTES           Set the size of all processing buffers (default 8192)
--clobber                Don't prompt to overwrite output file (default)
--combine concatenate    Concatenate all input files (default for sox, rec)
--combine sequence       Sequence all input files (default for play)
-D, --no-dither          Don't dither automatically
--effects-file FILENAME  File containing effects and options
-G, --guard              Use temporary files to guard against clipping
-h, --help               Display version number and usage information
--help-effect NAME       Show usage of effect NAME, or NAME=all for all
--help-format NAME       Show info on format NAME, or NAME=all for all
--i, --info              Behave as soxi(1)
--input-buffer BYTES     Override the input buffer size (default: as --buffer)
--no-clobber             Prompt to overwrite output file
-m, --combine mix        Mix multiple input files (instead of concatenating)
-M, --combine merge      Merge multiple input files (instead of concatenating)
--magic                  Use `magic' file-type detection
--multi-threaded         Enable parallel effects channels processing (where
                         available)
--norm                   Guard (see --guard) & normalise
--play-rate-arg ARG      Default `rate' argument for auto-resample with `play'
--plot gnuplot|octave    Generate script to plot response of filter effect
-q, --no-show-progress   Run in quiet mode; opposite of -S
--replay-gain track|album|off  Default: off (sox, rec), track (play)
-R                       Use default random numbers (same on each run of SoX)
-S, --show-progress      Display progress while processing audio data
--single-threaded        Disable parallel effects channels processing
--temp DIRECTORY         Specify the directory to use for temporary files
--version                Display version number of SoX and exit
-V[LEVEL]                Increment or set verbosity level (default 2); levels:
                           1: failure messages
                           2: warnings
                           3: details of processing
                           4-6: increasing levels of debug messages
FORMAT OPTIONS (fopts):
Input file format options need only be supplied for files that are headerless.
Output files will have the same format as the input file where possible and not
overriden by any of various means including providing output format options.
-v|--volume FACTOR       Input file volume adjustment factor (real number)
--ignore-length          Ignore input file length given in header; read to EOF
-t|--type FILETYPE       File type of audio
-s/-u/-f/-U/-A/-i/-a/-g  Encoding type=signed-integer/unsigned-integer/floating
                         point/mu-law/a-law/ima-adpcm/ms-adpcm/gsm-full-rate
-e|--encoding ENCODING   Set encoding (ENCODING in above list)
-b|--bits BITS           Encoded sample size in bits
-1/-2/-3/-4/-8           Encoded sample size in bytes
-N|--reverse-nibbles     Encoded nibble-order
-X|--reverse-bits        Encoded bit-order
--endian little|big|swap Encoded byte-order; swap means opposite to default
-L/-B/-x                 Short options for the above
-c|--channels CHANNELS   Number of channels of audio data; e.g. 2 = stereo
-r|--rate RATE           Sample rate of audio
-C|--compression FACTOR  Compression factor for output format
--add-comment TEXT       Append output file comment
--comment TEXT           Specify comment text for the output file
--comment-file FILENAME  File containing comment text for the output file
--no-glob                Don't `glob' wildcard match the following filename
AUDIO FILE FORMATS: 8svx aif aifc aiff aiffc al amb au avi avr cdda cdr cvs cvsd cvu dat dvms f32 f4 f64 f8 ffmpeg flac fssd gsm gsrt hcom htk ima ircam la lpc lpc10 lu m4a maud mp2 mp3 mp4 mpg nist ogg prc raw s1 s16 s2 s24 s3 s32 s4 s8 sb sf sl smp snd sndr sndt sou sox sph sw txw u1 u16 u2 u24 u3 u32 u4 u8 ub ul uw vms voc vorbis vox wav wavpcm wmv wve xa
PLAYLIST FORMATS: m3u pls
AUDIO DEVICE DRIVERS: alsa pulseaudio
EFFECTS: allpass band bandpass bandreject bass bend biquad chorus channels compand contrast crop+ dcshift deemph delay dither divide+ earwax echo echos equalizer fade filter* fir firfit+ flanger gain highpass input# key* loudness lowpass mcompand mixer noiseprof noisered norm oops output# overdrive pad pan* phaser pitch polyphase* rabbit* rate remix repeat resample* reverb reverse riaa silence sinc spectrogram speed splice stat stats stretch swap synth tempo treble tremolo trim vad vol
  * Deprecated effect    + Experimental effect    # LibSoX-only effect
EFFECT OPTIONS (effopts): effect dependent; see --help-effect