Здравствуйте.
Есть телевизор: Samsung LE32C530F1W(XXH)
Версия прошивки - T-MSX5DEUC-2011.0;
Исходники ядра телека - http://www.ex.ua/view_storage/876808657120, а также http://opensource.samsung.com/ (если я ошибся);
Toolchain (хотя он есть и в исходниках ядра к телеку) - http://www.ex.ua/view_storage/537800365036, а также - http://opensource.samsung.com/;
Изначально в этот телек нельзя пихать WIFI свистки, но если поменять модель телека на C550 - то при следующем включении телека автоматически подгружаются модули для работы с WIFI картами. Что собственно я и сделал - поменял в сервисном меню телека модель c C530 на C550. После этого....
Команды выполненые на телеке:
cat /proc/cpuinfo:
system type : MStar Titania3
processor : 0
cpu model : MIPS 34Kc V5.4
BogoMIPS : 351.23
wait instruction : yes
microsecond timers : yes
tlb_entries : 16
extra interrupt vector : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x06f8, 0x0240, 0x08f8]
ASEs implemented : mips16 dsp mt
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available df -h:
Filesystem Size Used Available Use% Mounted on
/dev/tbml0/4 3.2M 3.2M 0 100% /
tmpfs 30.0M 3.2M 26.8M 11% /dtv
tmpfs 10.0M 0 10.0M 0% /tmp
tmpfs 12.0M 0 12.0M 0% /dsm
tmpfs 20.0M 0 20.0M 0% /core
/dev/stl0/9 4.2M 1.6M 2.6M 39% /mtd_contents
/dev/stl0/10 9.2M 4.4M 4.8M 48% /mtd_rwarea
/dev/stl0/16 8.9M 7.4M 1.5M 84% /mtd_rwcommon
/dev/stl0/13 21.4M 21.4M 0 100% /mtd_exe
/dev/stl0/14 2.4M 2.4M 0 100% /mtd_appdata
/dev/stl0/15 17.5M 17.5M 0 100% /mtd_rocommon
/dev/sda1 1.9G 616.2M 1.3G 32% /dtv/usb/sda1dmesg:
Показать
Linux version 2.6.28.10 (jplee@localhost.localdomain) (gcc version 4.3.3 (VDLinux 1.1.x MIPS 2010-02-13) ) #82 PREEMPT Fri Apr 30 12:40:25 KST 2010
LINUX started...
boot_command_line: console=ttyS2,115200 root=/dev/tfsr4 rootfstype=squashfs MS_MEM LX_MEM=0x2B00000 EMAC_MEM=0x100000 DRAM_LEN=0x10000000 BB_ADDR=0x27FFC00 LX_MEM2=0x4A800000,0x5800000 quiet
LX_MEM = 0x400000, 0x2B00000
LX_MEM2 = 0x4A800000, 0x5800000
CPHYSADDR(PFN_ALIGN(&_end))= 0x748000
EMAC_LEN= 0x100000
DRAM_LEN= 0x10000000
console [early0] enabled
CPU revision is: 00019554 (MIPS 34Kc)
Begin Titania3_setup
Determined physical RAM map:
memory: 02b00000 @ 00400000 (usable)
memory: 05800000 @ 4a800000 (usable)
Wasting 32768 bytes for tracking 1024 unused pages
Zone PFN ranges:
DMA 0x00000400 -> 0x00001000
Normal 0x00001000 -> 0x00020000
HighMem 0x00020000 -> 0x00050000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000400 -> 0x00002f00
0: 0x0004a800 -> 0x00050000
On node 0 totalpages: 33536
free_area_init_node: node 0, pgdat 806bb3e0, node_mem_map 81000000
DMA zone: 24 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3048 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 6944 pages, LIFO batch:0
HighMem zone: 1536 pages used for memmap
HighMem zone: 20992 pages, LIFO batch:3
Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30984
Kernel command line: console=ttyS2,115200 root=/dev/tfsr4 rootfstype=squashfs MS_MEM LX_MEM=0x2B00000 EMAC_MEM=0x100000 DRAM_LEN=0x10000000 BB_ADDR=0x27FFC00 LX_MEM2=0x4A800000,0x5800000 quiet
alloc ebase: 819fc000
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00077a6d
Readback ErrCtl register=00077a6d
PID hash table entries: 256 (order: 8, 1024 bytes)
CPU freq count = 264000000
CPU frequency 528.00 MHz
Console: colour dummy device 80x25
===================================
FCR 0
===================================
console handover: boot [early0] -> real [ttyS2]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 120412k/44032k available (2148k kernel code, 13668k reserved, 655k data, 124k init, 90112k highmem)
SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[SELP] preset_lpj manual setting 175616
Calibrating delay loop (skipped) preset value.. 351.23 BogoMIPS (lpj=175616)
Mount-cache hash table entries: 512
net_namespace: 288 bytes
NET: Registered protocol family 16
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
highmem bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 59
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
brd: module loaded
loop: module loaded
[ONENAND] initializing
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xbf201300 (irq = 8) is a 16550
serial8250: ttyS1 at I/O 0xbf220c00 (irq = 79) is a 16550
serial8250: ttyS2 at I/O 0xbf220d00 (irq = 90) is a 16550
Driver 'sd' needs updating - please use bus_type methods
[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
[PAM: ] ++FSR_PAM_Init
[PAM: ] OneNAND physical base address : 0x1fc00000
[PAM: ] OneNAND virtual base address : 0xbfc00000
[PAM: ] OneNAND nMID=0xec : nDID=0x35
[PAM: ] --FSR_PAM_Init
FSR: Registered TinyFSR Driver.
TCP cubic registered
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
===================================
FCR 41
===================================
================================================================================
SAMSUNG Mstar Kernel
Version : 1004.84(RELEASE)
================================================================================
fsr: module license 'Samsung Proprietary' taints kernel.
[BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
BML: Registered BML Driver.
FSR: Registered STL Driver.
_mod_sys_init.176 ioctl
Algorithmics/MIPS FPU Emulator v1.5
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
_mod_sys_open.235 ioctl
_mod_sys_open.235 ioctl
************* UART1 Request IRQ *************
===================================
FCR 41
===================================
===================================
FCR 41
===================================
_mod_sys_open.235 ioctl
[GFLIP] GFLIP DRIVER OPEN
[GFLIP] GFLIP DRIVER OPEN
[GFLIP] GFLIP DRIVER OPEN
[GFLIP] GFLIP DRIVER OPEN
Wrong PHY Addr and reset to 0
Init EMAC error!
[CIP_KERNEL] /bin/authuld can read (after=0)
1024 bit RSA Sign/Verify Test Success.
[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<<
[CIP_KERNEL] (0)th waiting.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
In ehci_hcd_mstar_drv_probe
Mstar-ehci-2 H.W init
Titania3_later_start_ehc2 start
Mstar-ehci-2 Mstar-ehci-2.1: Mstar EHCI
drivers/mstar/usb/core/inode.c: creating file 'devices'
drivers/mstar/usb/core/inode.c: creating file '001'
Mstar-ehci-2 Mstar-ehci-2.1: new USB bus registered, assigned bus number 1
Mstar-ehci-2 Mstar-ehci-2.1: park 0
Mstar-ehci-2 Mstar-ehci-2.1: irq 74, io mem 0xbf201a00
Mstar-ehci-2 Mstar-ehci-2.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
Mstar-ehci-2 Mstar-ehci-2.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
usb usb1: default language 0x0409
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb_probe_interface, 196
hub 1-0:1.0: usb_probe_interface
usb_probe_interface, 199
usb_probe_interface, 203
usb_probe_interface, 208
usb_probe_interface, 214
hub 1-0:1.0: usb_probe_interface - got id
usb_probe_interface, 221
usb_probe_interface, 226
usb_probe_interface, 234
usb_probe_interface, 240
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: trying to enable port power on non-switchable hub
usb_probe_interface, 256
usb_probe_interface, 260
drivers/mstar/usb/core/inode.c: creating file '001'
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Mstar EHCI
usb usb1: Manufacturer: Linux 2.6.28.10 ehci_hcd
usb usb1: SerialNumber: mstar
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
In ehci_hcd_mstar_drv_probe
Mstar-ehci-1 H.W init
Titania3_later_start_ehc1 start
Mstar-ehci-1 Mstar-ehci-1.0: Mstar EHCI
drivers/mstar/usb/core/inode.c: creating file '002'
Mstar-ehci-1 Mstar-ehci-1.0: new USB bus registered, assigned bus number 2
Mstar-ehci-1 Mstar-ehci-1.0: park 0
Mstar-ehci-1 Mstar-ehci-1.0: irq 15, io mem 0xbf204800
Mstar-ehci-1 Mstar-ehci-1.0: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
Mstar-ehci-1 Mstar-ehci-1.0: init command 010009 (park)=0 ithresh=1 period=256 RUN
usb usb2: default language 0x0409
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb_probe_interface, 196
hub 2-0:1.0: usb_probe_interface
usb_probe_interface, 199
usb_probe_interface, 203
usb_probe_interface, 208
usb_probe_interface, 214
hub 2-0:1.0: usb_probe_interface - got id
usb_probe_interface, 221
usb_probe_interface, 226
usb_probe_interface, 234
usb_probe_interface, 240
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
hub 2-0:1.0: trying to enable port power on non-switchable hub
usb_probe_interface, 256
usb_probe_interface, 260
drivers/mstar/usb/core/inode.c: creating file '001'
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: Mstar EHCI
usb usb2: Manufacturer: Linux 2.6.28.10 ehci_hcd
usb usb2: SerialNumber: mstar
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Mstar-ehci-1 Mstar-ehci-1.0: GetStatus port 1 status 000803 sig=j CSC CONNECT
hub 2-0:1.0: port 1: status 0401 change 0001
hub 2-0:1.0: state 7 ports 1 chg 0002 evt 0000
hub 2-0:1.0: port 1, status 0401, change 0000, 480 Mb/s
====> hub_port_init 1
Plug in USB Port1
Mstar-ehci-1 Mstar-ehci-1.0: GetStatus port 1 status 00000d sig=se0 PEC PE CONNECT
udev->speed: 3
usb 2-1: new high speed USB device using Mstar-ehci-1 and address 2
usb 2-1: default language 0x0409
usb 2-1: usb_probe_device
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: adding 2-1:1.0 (config #1, interface 0)
usb_probe_interface, 196
hub 2-1:1.0: usb_probe_interface
usb_probe_interface, 199
usb_probe_interface, 203
usb_probe_interface, 208
usb_probe_interface, 214
hub 2-1:1.0: usb_probe_interface - got id
usb_probe_interface, 221
usb_probe_interface, 226
usb_probe_interface, 234
usb_probe_interface, 240
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
hub 2-1:1.0: standalone hub
hub 2-1:1.0: ganged power switching
hub 2-1:1.0: global over-current protection
hub 2-1:1.0: Single TT
hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-1:1.0: power on to power good time: 100ms
hub 2-1:1.0: local power source is good
hub 2-1:1.0: no over-current condition exists
hub 2-1:1.0: enabling power on all ports
hub 2-1:1.0: enabling power on all ports
usb_probe_interface, 256
usb_probe_interface, 260
drivers/mstar/usb/core/inode.c: creating file '002'
usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB 2.0 Hub
hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002
Mstar-ehci-1 Mstar-ehci-1.0: GetStatus port 1 status 00000d sig=se0 PEC PE CONNECT
hub 2-0:1.0: port 1 enable change, status 00000403
hub 2-1:1.0: port 1: status 0101 change 0001
usb 2-1: link qh256-0001/a0e8f100 start 255 [1/0 us]
hub 2-1:1.0: state 7 ports 4 chg 0002 evt 0000
hub 2-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
====> hub_port_init 1
udev->speed: 3
usb 2-1.1: new high speed USB device using Mstar-ehci-1 and address 3
usb 2-1.1: default language 0x0409
usb 2-1.1: usb_probe_device
usb 2-1.1: configuration #1 chosen from 1 choice
usb 2-1.1: adding 2-1.1:1.0 (config #1, interface 0)
usb_probe_interface, 196
usb-storage 2-1.1:1.0: usb_probe_interface
usb_probe_interface, 199
usb_probe_interface, 203
usb_probe_interface, 208
usb_probe_interface, 214
usb-storage 2-1.1:1.0: usb_probe_interface - got id
usb_probe_interface, 221
usb_probe_interface, 226
usb_probe_interface, 234
usb_probe_interface, 240
usb-storage: This device (058f,6387,0100 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 2.6.28.10)
Please send a copy of this message to <linux-usb@vger.kernel.org> and <usb-storage@lists.one-eyed-alien.net>
scsi0 : SCSI emulation for USB Mass Storage devices
usb_probe_interface, 256
usb_probe_interface, 260
drivers/mstar/usb/core/inode.c: creating file '003'
usb 2-1.1: New USB device found, idVendor=058f, idProduct=6387
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Mass Storage Device
usb 2-1.1: Manufacturer: JetFlash
usb 2-1.1: SerialNumber: VN4RD6FB
hub 2-1:1.0: state 7 ports 4 chg 0000 evt 0002
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 3944446 512-byte hardware sectors: (2.01 GB/1.87 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 3944446 512-byte hardware sectors: (2.01 GB/1.87 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
Poller thread started for sda, PID = 695
sd 0:0:0:0: [sda] Attached SCSI removable disk
sdp->removable:1
usb-storage: device scan complete
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
lsmod:
Module Size Used by Tainted: P
rt3572sta 682816 0 - Live 0xe066b000 (P)
rtutil3572sta 37216 1 rt3572sta, Live 0xe0562000
usb_storage 48352 1 - Live 0xe0540000
ehci_hcd 64144 0 - Live 0xe0513000
usbcore 169280 4 rtutil3572sta,usb_storage,ehci_hcd, Live 0xe04ca000
nfs 171616 0 - Live 0xe043d000
lockd 77616 1 nfs, Live 0xe03dc000
sunrpc 223456 2 nfs,lockd, Live 0xe037c000
cifs 272240 0 - Live 0xe02de000
samsung_mstar 79280 0 - Live 0xe0260000
rfs 90832 3 - Live 0xe0166000 (P)
fsr_stl 257520 6 - Live 0xe00fc000 (P)
fsr 288592 2 fsr_stl, Live 0xe0067000 (P)Есть USB WIFI: Netsys NET300N на чипе Realtek 8191SU;
Исходники - http://www.ex.ua/view_storage/406168350691, а также - http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true;
В VMWare + Ubuntu 12.04
пробую собрать драйвер к этому свистку по readme - не получается, выкидывает с ошибкой при вызове make.
make:
Показать
make ARCH=mips CROSS_COMPILE=mips-linux-gnu- -C /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9 M=/home/nikel/tv/drv modules
make[1]: Entering directory `/home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9'
CC [M] /home/nikel/tv/drv/cmd/rtl871x_cmd.o
In file included from include/linux/gfp.h:4,
from include/linux/slab.h:12,
from include/linux/percpu.h:5,
from include/linux/rcupdate.h:39,
from include/linux/sem.h:81,
from /home/nikel/tv/drv/include/osdep_service.h:49,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/mmzone.h:18:26: error: linux/bounds.h: No such file or directory
include/linux/mmzone.h:256:5: warning: "MAX_NR_ZONES" is not defined
In file included from include/linux/gfp.h:4,
from include/linux/slab.h:12,
from include/linux/percpu.h:5,
from include/linux/rcupdate.h:39,
from include/linux/sem.h:81,
from /home/nikel/tv/drv/include/osdep_service.h:49,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/mmzone.h:277: error: 'MAX_NR_ZONES' undeclared here (not in a function)
In file included from /home/nikel/tv/drv/include/byteorder/little_endian.h:30,
from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/swab.h:24: error: redefinition of typedef '__u16'
include/asm-generic/int-ll64.h:21: error: previous declaration of '__u16' was here
/home/nikel/tv/drv/include/byteorder/swab.h:28: error: redefinition of typedef '__u32'
include/asm-generic/int-ll64.h:24: error: previous declaration of '__u32' was here
/home/nikel/tv/drv/include/byteorder/swab.h:32: error: redefinition of typedef '__u8'
include/asm-generic/int-ll64.h:18: error: previous declaration of '__u8' was here
/home/nikel/tv/drv/include/byteorder/swab.h:36: error: redefinition of typedef '__u64'
include/asm-generic/int-ll64.h:28: error: previous declaration of '__u64' was here
/home/nikel/tv/drv/include/byteorder/swab.h:40: error: redefinition of '___swab16'
include/linux/swab.h:47: error: previous definition of '___swab16' was here
/home/nikel/tv/drv/include/byteorder/swab.h:50: error: redefinition of '___swab32'
include/linux/swab.h:56: error: previous definition of '___swab32' was here
/home/nikel/tv/drv/include/byteorder/swab.h:60: error: redefinition of '___swab64'
include/linux/swab.h:65: error: previous definition of '___swab64' was here
In file included from /home/nikel/tv/drv/include/byteorder/little_endian.h:30,
from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/swab.h:103:1: warning: "__swab16" redefined
In file included from include/linux/byteorder.h:5,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/swab.h:99:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/byteorder/little_endian.h:30,
from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/swab.h:104:1: warning: "__swab32" redefined
In file included from include/linux/byteorder.h:5,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/swab.h:108:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/byteorder/little_endian.h:30,
from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/swab.h:105:1: warning: "__swab64" redefined
In file included from include/linux/byteorder.h:5,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/swab.h:117:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:32:1: warning: "__constant_htonl" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:69:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:33:1: warning: "__constant_ntohl" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:70:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:34:1: warning: "__constant_htons" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:71:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:35:1: warning: "__constant_ntohs" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:72:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:36:1: warning: "__constant_cpu_to_le64" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:83:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:37:1: warning: "__constant_le64_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:76:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:38:1: warning: "__constant_cpu_to_le32" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:82:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:39:1: warning: "__constant_le32_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:75:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:40:1: warning: "__constant_cpu_to_le16" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:81:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:41:1: warning: "__constant_le16_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:74:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:42:1: warning: "__constant_cpu_to_be64" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:86:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:43:1: warning: "__constant_be64_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:79:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:44:1: warning: "__constant_cpu_to_be32" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:85:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:45:1: warning: "__constant_be32_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:78:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:46:1: warning: "__constant_cpu_to_be16" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:84:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:47:1: warning: "__constant_be16_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:77:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:48:1: warning: "__cpu_to_le64" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:39:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:49:1: warning: "__le64_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:36:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:50:1: warning: "__cpu_to_le32" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:38:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:51:1: warning: "__le32_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:35:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:52:1: warning: "__cpu_to_le16" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:37:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:53:1: warning: "__le16_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:34:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:54:1: warning: "__cpu_to_be64" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:46:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:55:1: warning: "__be64_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:43:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:56:1: warning: "__cpu_to_be32" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:45:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:57:1: warning: "__be32_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:42:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:58:1: warning: "__cpu_to_be16" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:44:1: warning: this is the location of the previous definition
In file included from /home/nikel/tv/drv/include/rtl871x_byteorder.h:31,
from /home/nikel/tv/drv/include/osdep_service.h:316,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
/home/nikel/tv/drv/include/byteorder/little_endian.h:59:1: warning: "__be16_to_cpu" redefined
In file included from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/byteorder.h:65,
from /home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9/arch/mips/include/asm/bitops.h:21,
from include/linux/bitops.h:17,
from include/linux/thread_info.h:54,
from include/linux/preempt.h:9,
from include/linux/spinlock.h:50,
from /home/nikel/tv/drv/include/osdep_service.h:39,
from /home/nikel/tv/drv/cmd/rtl871x_cmd.c:23:
include/linux/byteorder.h:41:1: warning: this is the location of the previous definition
make[2]: *** [/home/nikel/tv/drv/cmd/rtl871x_cmd.o] Error 1
make[1]: *** [_module_/home/nikel/tv/drv] Error 2
make[1]: Leaving directory `/home/nikel/tv/kernel/vdlinux-mstar-kernel/2.6.28.9'
make: *** [modules] Error 2 Проделал все то же самое и на CentOS 5.0 - результат тот же!
ПОМОГИТЕ СОБРАТЬ ДРАЙВЕР, пожалуйста.
Skype: Nikel2008;
