помогите с установкой драйвера Wi-Fi

lspci -vv

dmesg

rebus@rebus-killer:~$ lspci -vv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    Subsystem: Lenovo Device 3975
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 27
    Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at 3000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 26
    Region 0: Memory at 90605000 (64-bit, non-prefetchable) [size=16]
    Capabilities: <access denied>
    Kernel driver in use: mei_me
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at 9060a000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 28
    Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Memory behind bridge: 90500000-905fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Prefetchable memory behind bridge: 0000000090400000-00000000904fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: <access denied>
    Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
    Subsystem: Lenovo Device 3975
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at 90609000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
    Subsystem: Lenovo Device 3975
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: <access denied>
    Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
    Subsystem: Lenovo Device 3975
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 25
    Region 0: I/O ports at 3088 [size=8]
    Region 1: I/O ports at 3094 [size=4]
    Region 2: I/O ports at 3080 [size=8]
    Region 3: I/O ports at 3090 [size=4]
    Region 4: I/O ports at 3060 [size=32]
    Region 5: Memory at 90608000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
    Subsystem: Lenovo Device 3975
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin C routed to IRQ 10
    Region 0: Memory at 90604000 (64-bit, non-prefetchable) [size=256]
    Region 4: I/O ports at efa0 [size=32]
02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    Subsystem: Lenovo Device 30a1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at 90500000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath9k
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
    Subsystem: Lenovo Device 3975
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 24
    Region 0: I/O ports at 2000 [size=256]
    Region 2: Memory at 90404000 (64-bit, prefetchable) [size=4K]
    Region 4: Memory at 90400000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169

0.285679] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
[    0.285683] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.285686] pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[    0.285730] NET: Registered protocol family 2
[    0.286025] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.286043] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.286063] TCP: Hash tables configured (established 8192 bind 8192)
[    0.286085] TCP: reno registered
[    0.286089] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.286096] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.286178] NET: Registered protocol family 1
[    0.286201] pci 0000:00:02.0: Video device with shadowed ROM
[    0.286757] PCI: CLS 64 bytes, default 64
[    0.286827] Trying to unpack rootfs image as initramfs...
[    0.823628] Freeing initrd memory: 17532K (f5db2000 - f6ed1000)
[    0.824006] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.824106] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
[    0.824117] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
[    0.824217] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.824276] Scanning for low memory corruption every 60 seconds
[    0.825129] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.825173] Initialise system trusted keyring
[    0.825213] audit: initializing netlink subsys (disabled)
[    0.825237] audit: type=2000 audit(1418754546.816:1): initialized
[    0.825868] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.830514] zpool: loaded
[    0.830520] zbud: loaded
[    0.830659] VFS: Disk quotas dquot_6.5.2
[    0.830754] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.831875] fuse init (API version 7.23)
[    0.832100] msgmni has been set to 1706
[    0.832241] Key type big_key registered
[    0.832786] Key type asymmetric registered
[    0.832791] Asymmetric key parser 'x509' registered
[    0.832819] bounce: pool size: 64 pages
[    0.832841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.832897] io scheduler noop registered
[    0.832902] io scheduler deadline registered (default)
[    0.832984] io scheduler cfq registered
[    0.833850] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.833892] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.834014] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.834016] vesafb: scrolling: redraw
[    0.834019] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.834043] vesafb: framebuffer at 0x80000000, mapped to 0xf8080000, using 3072k, total 3072k
[    0.917150] Console: switching to colour frame buffer device 128x48
[    1.000124] fb0: VESA VGA frame buffer device
[    1.000186] intel_idle: MWAIT substates: 0x120
[    1.000188] intel_idle: v0.4 model 0x2A
[    1.000190] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.025837] ACPI: AC Adapter [ADP1] (on-line)
[    1.026072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.026107] ACPI: Lid Switch [LID0]
[    1.026208] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.026213] ACPI: Sleep Button [SLPB]
[    1.026308] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.026311] ACPI: Power Button [PWRF]
[    1.028645] thermal LNXTHERM:00: registered as thermal_zone0
[    1.028648] ACPI: Thermal Zone [TZS0] (35 C)
[    1.028990] thermal LNXTHERM:01: registered as thermal_zone1
[    1.028992] ACPI: Thermal Zone [TZS1] (20 C)
[    1.029048] GHES: HEST is not enabled!
[    1.029082] isapnp: Scanning for PnP cards...
[    1.030035] ACPI: Battery Slot [BAT0] (battery present)
[    1.339707] isapnp: No Plug & Play device found
[    1.339932] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.344288] Linux agpgart interface v0.103
[    1.347990] brd: module loaded
[    1.349816] loop: module loaded
[    1.350314] libphy: Fixed MDIO Bus: probed
[    1.350318] tun: Universal TUN/TAP device driver, 1.6
[    1.350320] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.350434] PPP generic driver version 2.4.2
[    1.350565] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.350572] ehci-pci: EHCI PCI platform driver
[    1.350743] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.350753] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.350773] ehci-pci 0000:00:1a.0: debug port 2
[    1.354694] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.354721] ehci-pci 0000:00:1a.0: irq 16, io mem 0x9060a000
[    1.365542] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.365616] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.365619] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.365622] usb usb1: Product: EHCI Host Controller
[    1.365624] usb usb1: Manufacturer: Linux 3.18.0-031800-generic ehci_hcd
[    1.365627] usb usb1: SerialNumber: 0000:00:1a.0
[    1.365904] hub 1-0:1.0: USB hub found
[    1.365915] hub 1-0:1.0: 2 ports detected
[    1.366283] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.366293] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.366312] ehci-pci 0000:00:1d.0: debug port 2
[    1.370221] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.370244] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90609000
[    1.381535] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.381602] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.381604] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.381607] usb usb2: Product: EHCI Host Controller
[    1.381610] usb usb2: Manufacturer: Linux 3.18.0-031800-generic ehci_hcd
[    1.381612] usb usb2: SerialNumber: 0000:00:1d.0
[    1.381874] hub 2-0:1.0: USB hub found
[    1.381883] hub 2-0:1.0: 2 ports detected
[    1.382105] ehci-platform: EHCI generic platform driver
[    1.382128] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.382135] ohci-pci: OHCI PCI platform driver
[    1.382160] ohci-platform: OHCI generic platform driver
[    1.382180] uhci_hcd: USB Universal Host Controller Interface driver
[    1.382296] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.384866] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.384873] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.385185] mousedev: PS/2 mouse device common for all mice
[    1.385616] rtc_cmos 00:01: RTC can wake from S4
[    1.385836] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.385870] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.385978] device-mapper: uevent: version 1.0.3
[    1.386157] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    1.386207] platform eisa.0: Probing EISA bus 0
[    1.386211] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.386214] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.386217] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.386221] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.386224] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.386227] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.386230] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.386233] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.386237] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.386239] platform eisa.0: EISA: Detected 0 cards
[    1.386273] cpufreq-nforce2: No nForce2 chipset.
[    1.386281] Intel P-state driver initializing.
[    1.386491] ledtrig-cpu: registered to indicate activity on CPUs
[    1.386850] TCP: cubic registered
[    1.387424] NET: Registered protocol family 10
[    1.388044] NET: Registered protocol family 17
[    1.388089] Key type dns_resolver registered
[    1.388784] Using IPI No-Shortcut mode
[    1.389389] Loading compiled-in X.509 certificates
[    1.397319] Loaded X.509 cert 'Magrathea: Glacier signing key: 7a04ab0f1a83d25595523a08ff36eeb93da51eba'
[    1.397348] registered taskstats version 1
[    1.400729] Key type trusted registered
[    1.403774] Key type encrypted registered
[    1.406839] AppArmor: AppArmor sha1 policy hashing enabled
[    1.406845] ima: No TPM chip found, activating TPM-bypass!
[    1.406886] evm: HMAC attrs: 0x1
[    1.407454]   Magic number: 10:76:494
[    1.407552] rtc_cmos 00:01: setting system clock to 2014-12-16 18:29:08 UTC (1418754548)
[    1.407609] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.407638] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.407640] EDD information not available.
[    1.407834] PM: Hibernation image not present or could not be loaded.
[    1.408224] Freeing unused kernel memory: 920K (c1a73000 - c1b59000)
[    1.408298] Write protecting the kernel text: 6984k
[    1.408420] Write protecting the kernel read-only data: 3044k
[    1.408421] NX-protecting the kernel data: 5304k
[    1.426662] systemd-udevd[96]: starting version 204
[    1.488126] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.488141] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.488506] r8169 0000:03:00.0: irq 24 for MSI/MSI-X
[    1.488928] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8036000, f0:de:f1:86:50:79, XID 0c200000 IRQ 24
[    1.488932] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.501112] ahci 0000:00:1f.2: version 3.0
[    1.501321] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[    1.501369] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.513532] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
[    1.513541] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    1.539181] scsi host0: ahci
[    1.539509] scsi host1: ahci
[    1.539725] scsi host2: ahci
[    1.539943] scsi host3: ahci
[    1.540146] scsi host4: ahci
[    1.540344] scsi host5: ahci
[    1.540481] ata1: SATA max UDMA/133 abar m2048@0x90608000 port 0x90608100 irq 25
[    1.540484] ata2: DUMMY
[    1.540486] ata3: DUMMY
[    1.540489] ata4: SATA max UDMA/133 abar m2048@0x90608000 port 0x90608280 irq 25
[    1.540493] ata5: SATA max UDMA/133 abar m2048@0x90608000 port 0x90608300 irq 25
[    1.540496] ata6: SATA max UDMA/133 abar m2048@0x90608000 port 0x90608380 irq 25
[    1.677479] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.697469] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.809805] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.809809] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.810336] hub 1-1:1.0: USB hub found
[    1.810373] hub 1-1:1.0: 6 ports detected
[    1.821422] tsc: Refined TSC clocksource calibration: 1496.600 MHz
[    1.830109] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.830113] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.830467] hub 2-1:1.0: USB hub found
[    1.830682] hub 2-1:1.0: 6 ports detected
[    1.857416] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.891454] ata1.00: ATA-8: WDC WD3200BPVT-24ZEST0, 02.01A02, max UDMA/133
[    1.891463] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.892777] ata1.00: configured for UDMA/133
[    1.893045] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BPVT-2 1A02 PQ: 0 ANSI: 5
[    1.893536] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.893540] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.893601] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.893642] sd 0:0:0:0: [sda] Write Protect is off
[    1.893646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.893680] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.952817]  sda: sda1 sda2 sda3
[    1.953602] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.081501] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    2.101512] usb 2-1.4: new full-speed USB device number 3 using ehci-pci
[    2.179793] usb 1-1.2: New USB device found, idVendor=09da, idProduct=000a
[    2.179796] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.179799] usb 1-1.2: Product: USB Mouse
[    2.179802] usb 1-1.2: Manufacturer: A4Tech
[    2.192137] hidraw: raw HID events driver (C) Jiri Kosina
[    2.203312] usbcore: registered new interface driver usbhid
[    2.203315] usbhid: USB HID core driver
[    2.204881] usb 2-1.4: New USB device found, idVendor=0489, idProduct=e00d
[    2.204886] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.204889] usb 2-1.4: Product: Broadcom Bluetooth 2.1 Device
[    2.204892] usb 2-1.4: Manufacturer: Broadcom Corp
[    2.204894] usb 2-1.4: SerialNumber: 889FFAE064DC
[    2.210844] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:09DA:000A.0001/input/input6
[    2.211085] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1a.0-1.2/input0
[    2.213307] ata4: SATA link down (SStatus 0 SControl 300)
[    2.217017] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 752809
[    2.249688] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.261396] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[    2.281450] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[    2.369559] usb 1-1.5: New USB device found, idVendor=5986, idProduct=0292
[    2.369563] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.369566] usb 1-1.5: Product: Lenovo EasyCamera
[    2.369569] usb 1-1.5: Manufacturer: Bison Corp.
[    2.374149] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0139
[    2.374157] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.374162] usb 2-1.6: Product: USB2.0-CRW
[    2.374167] usb 2-1.6: Manufacturer: Generic
[    2.374172] usb 2-1.6: SerialNumber: 20100201396000000
[    2.385144] usbcore: registered new interface driver rtsx_usb
[    2.533203] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.536328] ata5.00: ATAPI: SlimtypeDVD A  DS8A5SH, XL63, max UDMA/100
[    2.537919] ata5.00: configured for UDMA/100
[    2.542229] scsi 4:0:0:0: CD-ROM            Slimtype DVD A  DS8A5SH   XL63 PQ: 0 ANSI: 5
[    2.571921] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.571925] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.572200] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.572331] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.821289] Switched to clocksource tsc
[    2.889073] ata6: SATA link down (SStatus 0 SControl 300)
[    3.300802] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.127755] random: nonblocking pool is initialized
[    4.945489] init: plymouth-upstart-bridge main process (169) terminated with status 1
[    4.945508] init: plymouth-upstart-bridge main process ended, respawning
[    4.948490] init: plymouth-upstart-bridge main process (181) terminated with status 1
[    4.948507] init: plymouth-upstart-bridge main process ended, respawning
[    4.950774] init: plymouth-upstart-bridge main process (183) terminated with status 1
[    4.950793] init: plymouth-upstart-bridge main process ended, respawning
[    4.954177] init: plymouth-upstart-bridge main process (184) terminated with status 1
[    4.954194] init: plymouth-upstart-bridge main process ended, respawning
[    4.957087] init: plymouth-upstart-bridge main process (186) terminated with status 1
[    4.957104] init: plymouth-upstart-bridge main process ended, respawning
[    4.959281] init: plymouth-upstart-bridge main process (188) terminated with status 1
[    4.959299] init: plymouth-upstart-bridge main process ended, respawning
[    4.962403] init: plymouth-upstart-bridge main process (189) terminated with status 1
[    4.962421] init: plymouth-upstart-bridge main process ended, respawning
[    4.964702] init: plymouth-upstart-bridge main process (191) terminated with status 1
[    4.964720] init: plymouth-upstart-bridge main process ended, respawning
[    4.968283] init: plymouth-upstart-bridge main process (192) terminated with status 1
[    4.968301] init: plymouth-upstart-bridge main process ended, respawning
[    4.971256] init: plymouth-upstart-bridge main process (194) terminated with status 1
[    4.971274] init: plymouth-upstart-bridge main process ended, respawning
[    4.973552] init: plymouth-upstart-bridge main process (196) terminated with status 1
[    4.973568] init: plymouth-upstart-bridge respawning too fast, stopped
[    5.134622] init: ureadahead main process (172) terminated with status 5
[    6.422321] Adding 138236k swap on /dev/sda1.  Priority:-1 extents:1 across:138236k FS
[    7.998248] systemd-udevd[309]: starting version 204
[    8.267436] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    9.603996] lp: driver loaded but no devices found
[    9.796020] ppdev: user-space parallel port driver
[   11.776338] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140926/utaddress-258)
[   11.776348] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.776354] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140926/utaddress-258)
[   11.776359] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.776361] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140926/utaddress-258)
[   11.776366] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.776368] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140926/utaddress-258)
[   11.776372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.776374] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.810692] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7
[   11.817852] wmi: Mapper loaded
[   12.072787] mei_me 0000:00:16.0: irq 26 for MSI/MSI-X
[   12.161744] [drm] Initialized drm 1.1.0 20060810
[   12.421846] cfg80211: Calling CRDA to update world regulatory domain
[   12.548917] [drm] Memory usable by graphics device = 2048M
[   12.548924] checking generic (80000000 300000) vs hw (80000000 10000000)
[   12.548926] fb: switching to inteldrmfb from VESA VGA
[   12.548963] Console: switching to colour dummy device 80x25
[   12.549514] [drm] Replacing VGA console driver
[   12.574051] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[   12.574069] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.574072] [drm] Driver supports precise vblank timestamp query.
[   12.574184] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.608542] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   12.610152] fbcon: inteldrmfb (fb0) is primary device
[   13.027703] audit: type=1400 audit(1418754560.119:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=436 comm="apparmor_parser"
[   13.027709] audit: type=1400 audit(1418754560.119:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser"
[   13.027712] audit: type=1400 audit(1418754560.119:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=436 comm="apparmor_parser"
[   13.027727] audit: type=1400 audit(1418754560.119:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=437 comm="apparmor_parser"
[   13.027734] audit: type=1400 audit(1418754560.119:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=437 comm="apparmor_parser"
[   13.027738] audit: type=1400 audit(1418754560.119:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=437 comm="apparmor_parser"
[   13.028437] audit: type=1400 audit(1418754560.119:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=436 comm="apparmor_parser"
[   13.028442] audit: type=1400 audit(1418754560.119:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=436 comm="apparmor_parser"
[   13.028466] audit: type=1400 audit(1418754560.119:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=437 comm="apparmor_parser"
[   13.028470] audit: type=1400 audit(1418754560.119:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=437 comm="apparmor_parser"
[   13.118944] ath: phy0: Enable LNA combining
[   13.121661] ath: phy0: ASPM enabled: 0x43
[   13.121663] ath: EEPROM regdomain: 0x65
[   13.121664] ath: EEPROM indicates we should expect a direct regpair map
[   13.121666] ath: Country alpha2 being used: 00
[   13.121666] ath: Regpair used: 0x65
[   13.322144] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.322971] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8080000, irq=17
[   13.405322] intel_rapl: Found RAPL domain package
[   13.405325] intel_rapl: Found RAPL domain core
[   13.405329] intel_rapl: Found RAPL domain uncore
[   13.506318] Console: switching to colour frame buffer device 170x48
[   13.511485] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.511486] i915 0000:00:02.0: registered panic notifier
[   13.515208] acpi device:3e: registered as cooling_device3
[   13.515430] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[   13.517150] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[   14.152770] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[   14.274709] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   14.274716] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.274720] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   14.274722] sound hdaudioC0D0:    mono: mono_out=0x0
[   14.274725] sound hdaudioC0D0:    inputs:
[   14.274729] sound hdaudioC0D0:      Mic=0x18
[   14.274732] sound hdaudioC0D0:      Internal Mic=0x12
[   14.291053] Bluetooth: Core ver 2.19
[   14.291117] NET: Registered protocol family 31
[   14.291120] Bluetooth: HCI device and connection manager initialized
[   14.291522] Bluetooth: HCI socket layer initialized
[   14.291528] Bluetooth: L2CAP socket layer initialized
[   14.291539] Bluetooth: SCO socket layer initialized
[   14.326796] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.326962] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.327110] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.504090] usbcore: registered new interface driver btusb
[   14.847257] cfg80211: World regulatory domain updated:
[   14.847263] cfg80211:  DFS Master region: unset
[   14.847266] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.847270] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.847273] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.847276] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.847279] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.847281] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.984577] media: Linux media interface: v0.10
[   15.025480] Linux video capture interface: v2.00
[   15.551667] init: failsafe main process (547) killed by TERM signal
[   16.024646] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0292)
[   16.026854] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input12
[   16.027004] usbcore: registered new interface driver uvcvideo
[   16.027006] USB Video Class driver (1.1.1)
[   17.254227] init: avahi-cups-reload main process (732) terminated with status 1
[   17.740105] Bluetooth: RFCOMM TTY layer initialized
[   17.740117] Bluetooth: RFCOMM socket layer initialized
[   17.740125] Bluetooth: RFCOMM ver 1.11
[   18.077692] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.077697] Bluetooth: BNEP filters: protocol multicast
[   18.077706] Bluetooth: BNEP socket layer initialized
[   22.357574] audit_printk_skb: 15 callbacks suppressed
[   22.357579] audit: type=1400 audit(1418754569.451:17): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=808 comm="apparmor_parser"
[   22.357588] audit: type=1400 audit(1418754569.451:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=808 comm="apparmor_parser"
[   22.357594] audit: type=1400 audit(1418754569.451:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=808 comm="apparmor_parser"
[   22.358319] audit: type=1400 audit(1418754569.451:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=808 comm="apparmor_parser"
[   22.358325] audit: type=1400 audit(1418754569.451:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=808 comm="apparmor_parser"
[   22.358679] audit: type=1400 audit(1418754569.451:22): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=808 comm="apparmor_parser"
[   22.554258] audit: type=1400 audit(1418754569.651:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=807 comm="apparmor_parser"
[   22.554268] audit: type=1400 audit(1418754569.651:24): apparmor="STATUS" operation="profile_load" name="chromium" pid=807 comm="apparmor_parser"
[   22.554660] audit: type=1400 audit(1418754569.651:25): apparmor="STATUS" operation="profile_replace" name="chromium" pid=807 comm="apparmor_parser"
[   22.919470] audit: type=1400 audit(1418754570.015:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=812 comm="apparmor_parser"
[   23.026480] r8169 0000:03:00.0 eth0: link down
[   23.026545] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.908769] init: libvirt-bin main process (973) terminated with status 127
[   24.908789] init: libvirt-bin main process ended, respawning
[   30.015590] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[   30.020893] vboxdrv: Found 2 processor cores.
[   30.022812] vboxdrv: fAsync=0 offMin=0x74c offMax=0x1414
[   30.023941] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   30.023944] vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
[   30.361497] vboxpci: IOMMU not found (not registered)
[   34.662570] r8169 0000:03:00.0 eth0: link up
[   34.662595] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   40.535484] r8169 0000:03:00.0 eth0: link down
[   42.116125] r8169 0000:03:00.0 eth0: link up
[   47.406746] r8169 0000:03:00.0 eth0: link down
[   47.406808] r8169 0000:03:00.0 eth0: link down
[   47.406826] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   47.754853] r8169 0000:03:00.0 eth0: link down
[   47.754930] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   49.379992] r8169 0000:03:00.0 eth0: link up
[   49.380015] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  105.769993] NET: Registered protocol family 24
[  309.663733] systemd-hostnamed[3313]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!