LinuxForum.Fans
Тема

Устанавливается только 173 драйвер nvidia

Автор: dead_elf 26 сообщений 3911 просмотров
18.01.2012 23:03 #222808

проблема такая.. устанавливаются дрова только версии 173.. чуть новее и уже иксы не запускаются. хотя мою видюху должны поддерживать самые новые дрова 290..
сидел бы уже на 173 дровах.. но не работают консоли ctrl+alt+f* моник уходит в экономный режим и все
вот конфиг при установленном 290 драйвере

Показать

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 290.10 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Wed Nov 16 18:47:40 PST 2011

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

вот что в логах

Показать

[ 19.981]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 19.981] X Protocol Version 11, Revision 0
[ 19.981] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu
[ 19.981] Current Operating System: Linux gleb-desktop 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64
[ 19.981] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=dade384a-1741-46f0-9ef6-222bfe1851bb ro quiet splash vt.handoff=7
[ 19.981] Build Date: 19 October 2011 05:21:26AM
[ 19.981] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
[ 19.981] Current version of pixman: 0.22.2
[ 19.981] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.981] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.981] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 18 01:00:43 2012
[ 19.981] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.981] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 20.044] (==) ServerLayout "Layout0"
[ 20.044] (**) |-->Screen "Screen0" (0)
[ 20.044] (**) | |-->Monitor "Monitor0"
[ 20.044] (**) | |-->Device "Device0"
[ 20.044] (**) |-->Input Device "Keyboard0"
[ 20.044] (**) |-->Input Device "Mouse0"
[ 20.044] (==) Automatically adding devices
[ 20.044] (==) Automatically enabling devices
[ 20.044] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 20.044] Entry deleted from font path.
[ 20.044] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 20.044] Entry deleted from font path.
[ 20.044] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 20.044] Entry deleted from font path.
[ 20.044] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 20.044] Entry deleted from font path.
[ 20.044] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 20.044] Entry deleted from font path.
[ 20.044] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 20.044] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 20.044] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20.044] (WW) Disabling Keyboard0
[ 20.044] (WW) Disabling Mouse0
[ 20.044] (II) Loader magic: 0x7e0220
[ 20.044] (II) Module ABI versions:
[ 20.044] X.Org ANSI C Emulation: 0.4
[ 20.044] X.Org Video Driver: 10.0
[ 20.044] X.Org XInput driver : 12.3
[ 20.044] X.Org Server Extension : 5.0
[ 20.045] (--) PCI:*(0:2:0:0) 10de:0615:10de:0719 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[ 20.045] (II) Open ACPI successful (/var/run/acpid.socket)
[ 20.045] (II) LoadModule: "extmod"
[ 20.067] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.067] (II) Module extmod: vendor="X.Org Foundation"
[ 20.067] compiled for 1.10.4, module version = 1.0.0
[ 20.067] Module class: X.Org Server Extension
[ 20.068] ABI class: X.Org Server Extension, version 5.0
[ 20.068] (II) Loading extension MIT-SCREEN-SAVER
[ 20.068] (II) Loading extension XFree86-VidModeExtension
[ 20.068] (II) Loading extension XFree86-DGA
[ 20.068] (II) Loading extension DPMS
[ 20.068] (II) Loading extension XVideo
[ 20.068] (II) Loading extension XVideo-MotionCompensation
[ 20.068] (II) Loading extension X-Resource
[ 20.068] (II) LoadModule: "dbe"
[ 20.068] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.068] (II) Module dbe: vendor="X.Org Foundation"
[ 20.068] compiled for 1.10.4, module version = 1.0.0
[ 20.068] Module class: X.Org Server Extension
[ 20.068] ABI class: X.Org Server Extension, version 5.0
[ 20.068] (II) Loading extension DOUBLE-BUFFER
[ 20.068] (II) LoadModule: "glx"
[ 20.068] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 20.986] (II) Module glx: vendor="NVIDIA Corporation"
[ 21.007] compiled for 4.0.2, module version = 1.0.0
[ 21.007] Module class: X.Org Server Extension
[ 21.007] (II) NVIDIA GLX Module 290.10 Wed Nov 16 18:01:24 PST 2011
[ 21.007] (II) Loading extension GLX
[ 21.007] (II) LoadModule: "record"
[ 21.008] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 21.008] (II) Module record: vendor="X.Org Foundation"
[ 21.008] compiled for 1.10.4, module version = 1.13.0
[ 21.008] Module class: X.Org Server Extension
[ 21.008] ABI class: X.Org Server Extension, version 5.0
[ 21.008] (II) Loading extension RECORD
[ 21.008] (II) LoadModule: "dri"
[ 21.008] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 21.008] (II) Module dri: vendor="X.Org Foundation"
[ 21.008] compiled for 1.10.4, module version = 1.0.0
[ 21.008] ABI class: X.Org Server Extension, version 5.0
[ 21.008] (II) Loading extension XFree86-DRI
[ 21.008] (II) LoadModule: "dri2"
[ 21.008] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 21.008] (II) Module dri2: vendor="X.Org Foundation"
[ 21.008] compiled for 1.10.4, module version = 1.2.0
[ 21.008] ABI class: X.Org Server Extension, version 5.0
[ 21.008] (II) Loading extension DRI2
[ 21.008] (II) LoadModule: "nvidia"
[ 21.008] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 21.341] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 21.350] compiled for 4.0.2, module version = 1.0.0
[ 21.350] Module class: X.Org Video Driver
[ 21.454] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 21.454] (EE) NVIDIA: system's kernel log for additional error messages.
[ 21.454] (II) UnloadModule: "nvidia"
[ 21.454] (II) Unloading nvidia
[ 21.454] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 21.454] (EE) No drivers available.
[ 21.454]
Fatal server error:
[ 21.454] no screens found
[ 21.454]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 21.454] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 21.454]

дрова проверял на убунту 10.04-11.10 и на опен сус 12.1 и везде ставятся только 173 дрова


атлон х4 620, видюха geforce gts250, мать ASRock N68PV-GS

18.01.2012 23:19 #222815

как устанавливали? и не забыли перезагрузится после установки нового драйвера?
вручную modprobe nvidia отрабатывает нормально? и если нет, то что падает в dmesg после этого?

18.01.2012 23:31 #222818

Fat-Zer, устанавливал как через поиск дров так и через репозиторий.. пробовал даже с оф сайта все одинаково
после перезагрузки просит сконфигурировать xorg пишу в терминале sudo nvidia-xconfig
и после перезагрузки иксов черный экран
по этому и не моуг посмотреть что в dmesg

19.01.2012 01:02 #222839
dead_elf написал:
после перезагрузки

уточню, перезагрузки машины?

dead_elf написал:
пишу в терминале sudo nvidia-xconfig

так после установки и перезагрузки какой-то доступ к консоли всё таки можете получить?

dead_elf написал:
и после перезагрузки иксов черный экран
по этому и не моуг посмотреть что в dmesg

опять же, на виртуальные консоли перейти не получается?

как отключить автозапуск иксов в ваших дистрах я не помню/не знаю. по идее надо убрать xdm из уровня запуска по умолчанию или загрузится с init=3...

если никак не удаётся, получить доступ к консоли с новыми дровами, то можно загрузится с livecd и посмотреть логи в /var/log/messages. grep по -i 'nvidia\|video'. только там много, где последний запуск, возможно, придётся угадывать...

19.01.2012 01:15 #222840

Fat-Zer,
да после перезагрузки машины он почему то автоматом не конфигурирует xorg.conf и поэтому я пишу вручную
а после второй перезагрузки или сброса иксов виснет на фиолетовой заставке убунты
сейчас попробую опять поставить эти дрова и запуститься без иксов

20.01.2012 00:00 #223094

в /var/log/ не нашел файл messages. grep
но нашел файл dmesg
вот его содержимое

Показать

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=dade384a-1741-46f0-9ef6-222bfe1851bb ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68PV-GS, BIOS P2.00 10/12/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cffb0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to cffb0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cffae000-cffb0000
[ 0.000000] RAMDISK: 365cc000 - 372de000
[ 0.000000] ACPI: RSDP 00000000000fb090 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cffb0000 00040 (v01 101209 RSDT1141 20091012 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffb0450 054A5 (v01 AS162 AS162191 00000191 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffc0000 00040
[ 0.000000] ACPI: APIC 00000000cffb0390 00080 (v01 101209 APIC1141 20091012 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffb0410 0003C (v01 101209 OEMMCFG 20091012 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffc0040 00071 (v01 101209 OEMB1141 20091012 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000cffb5900 00027 (v01 101209 OEMAAFT 20091012 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffb5930 00038 (v01 101209 OEMHPET0 20091012 MSFT 00000097)
[ 0.000000] ACPI: NVHD 00000000cffc00c0 00554 (v01 101209 NVHDCP 20091012 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cffb0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048383
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833512 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000
[ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000
[ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s79616 r8192 d22784 u524288
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031354
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=dade384a-1741-46f0-9ef6-222bfe1851bb ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3975244k/4980736k available (6109k kernel code, 787204k absent, 218288k reserved, 4876k data, 984k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2609.423 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5218.84 BogoMIPS (lpj=10437692)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004031] Security Framework initialized
[ 0.004043] AppArmor: AppArmor initialized
[ 0.004045] Yama: becoming mindful.
[ 0.004417] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005760] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006376] Mount-cache hash table entries: 256
[ 0.008060] Initializing cgroup subsys cpuacct
[ 0.008065] Initializing cgroup subsys memory
[ 0.008072] Initializing cgroup subsys devices
[ 0.008074] Initializing cgroup subsys freezer
[ 0.008075] Initializing cgroup subsys net_cls
[ 0.008077] Initializing cgroup subsys blkio
[ 0.008083] Initializing cgroup subsys perf_event
[ 0.008106] tseg: 0000000000
[ 0.008118] CPU: Physical Processor ID: 0
[ 0.008120] CPU: Processor Core ID: 0
[ 0.008122] mce: CPU supports 6 MCE banks
[ 0.009426] ACPI: Core revision 20110413
[ 0.011658] ftrace: allocating 25647 entries in 101 pages
[ 0.016519] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058094] CPU0: AMD Athlon(tm) II X4 620 Processor stepping 02
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148074] #2
[ 0.148076] smpboot cpu 2: start_ip = 9a000
[ 0.240074] #3 Ok.
[ 0.240076] smpboot cpu 3: start_ip = 9a000
[ 0.332025] Brought up 4 CPUs
[ 0.332027] Total of 4 processors activated (20877.05 BogoMIPS).
[ 0.332638] devtmpfs: initialized
[ 0.332638] PM: Registering ACPI NVS region at cffc0000 (196608 bytes)
[ 0.333226] print_constraints: dummy:
[ 0.333258] Time: 22:32:57 Date: 01/19/12
[ 0.333289] NET: Registered protocol family 16
[ 0.333386] node 0 link 0: io port [1000, ffffff]
[ 0.333389] TOM: 00000000d0000000 aka 3328M
[ 0.333390] Fam 10h mmconf [e0000000, efffffff]
[ 0.333392] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.333397] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.333399] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.333402] node 0 link 0: mmio [a0000, bffff]
[ 0.333404] TOM2: 0000000130000000 aka 4864M
[ 0.333406] bus: [00, 07] on node 0 link 0
[ 0.333408] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.333410] bus: 00 index 1 [mem 0xd0000000-0xdfffffff]
[ 0.333412] bus: 00 index 2 [mem 0xf0000000-0xffffffff]
[ 0.333414] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[ 0.333415] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.333423] Extended Config Space enabled on 1 nodes
[ 0.333444] ACPI: bus type pci registered
[ 0.333498] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.333297] Trying to unpack rootfs image as initramfs...
[ 0.333506] PCI: not using MMCONFIG
[ 0.333508] PCI: Using configuration type 1 for base access
[ 0.333509] PCI: Using configuration type 1 for extended access
[ 0.334027] bio: create slab <bio-0> at 0
[ 0.334027] ACPI: EC: Look up EC in DSDT
[ 0.336712] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.338314] ACPI: Interpreter enabled
[ 0.338317] ACPI: (supports S0 S1 S4 S5)
[ 0.338332] ACPI: Using IOAPIC for interrupt routing
[ 0.338349] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.339013] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.363423] ACPI: No dock devices found.
[ 0.363426] HEST: Table not found.
[ 0.363429] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.363539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.363670] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.363672] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.363674] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.363676] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.363678] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.363680] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.363705] pci 0000:00:00.0: [10de:0547] type 0 class 0x000500
[ 0.363853] pci 0000:00:01.0: [10de:0548] type 0 class 0x000601
[ 0.363859] pci 0000:00:01.0: reg 10: [io 0x1f00-0x1fff]
[ 0.363891] pci 0000:00:01.1: [10de:0542] type 0 class 0x000c05
[ 0.363901] pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc3f]
[ 0.363915] pci 0000:00:01.1: reg 20: [io 0x1d00-0x1d3f]
[ 0.363920] pci 0000:00:01.1: reg 24: [io 0x1e00-0x1e3f]
[ 0.363939] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.363944] pci 0000:00:01.1: PME# disabled
[ 0.363960] pci 0000:00:02.0: [10de:055e] type 0 class 0x000c03
[ 0.363969] pci 0000:00:02.0: reg 10: [mem 0xf9fff000-0xf9ffffff]
[ 0.363996] pci 0000:00:02.0: supports D1 D2
[ 0.363998] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364001] pci 0000:00:02.0: PME# disabled
[ 0.364011] pci 0000:00:02.1: [10de:055f] type 0 class 0x000c03
[ 0.364032] pci 0000:00:02.1: reg 10: [mem 0xf9ffec00-0xf9ffecff]
[ 0.364064] pci 0000:00:02.1: supports D1 D2
[ 0.364065] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364068] pci 0000:00:02.1: PME# disabled
[ 0.364087] pci 0000:00:04.0: [10de:055e] type 0 class 0x000c03
[ 0.364095] pci 0000:00:04.0: reg 10: [mem 0xf9ffd000-0xf9ffdfff]
[ 0.364123] pci 0000:00:04.0: supports D1 D2
[ 0.364125] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364127] pci 0000:00:04.0: PME# disabled
[ 0.364139] pci 0000:00:04.1: [10de:055f] type 0 class 0x000c03
[ 0.364149] pci 0000:00:04.1: reg 10: [mem 0xf9ffe800-0xf9ffe8ff]
[ 0.364181] pci 0000:00:04.1: supports D1 D2
[ 0.364182] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364185] pci 0000:00:04.1: PME# disabled
[ 0.364201] pci 0000:00:06.0: [10de:0560] type 0 class 0x000101
[ 0.364221] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
[ 0.364246] pci 0000:00:07.0: [10de:055c] type 0 class 0x000403
[ 0.364256] pci 0000:00:07.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff]
[ 0.364288] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.364290] pci 0000:00:07.0: PME# disabled
[ 0.364308] pci 0000:00:08.0: [10de:0561] type 1 class 0x000604
[ 0.364338] pci 0000:00:09.0: [10de:0550] type 0 class 0x000101
[ 0.364345] pci 0000:00:09.0: reg 10: [io 0x0f80-0x0f87]
[ 0.364348] pci 0000:00:09.0: reg 14: [io 0x0f00-0x0f03]
[ 0.364352] pci 0000:00:09.0: reg 18: [io 0x0e80-0x0e87]
[ 0.364356] pci 0000:00:09.0: reg 1c: [io 0x0e00-0x0e03]
[ 0.364360] pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f]
[ 0.364364] pci 0000:00:09.0: reg 24: [mem 0xf9ff6000-0xf9ff7fff]
[ 0.364390] pci 0000:00:0a.0: [10de:054c] type 0 class 0x000200
[ 0.364399] pci 0000:00:0a.0: reg 10: [mem 0xf9ffc000-0xf9ffcfff]
[ 0.364403] pci 0000:00:0a.0: reg 14: [io 0xc880-0xc887]
[ 0.364407] pci 0000:00:0a.0: reg 18: [mem 0xf9ffe400-0xf9ffe4ff]
[ 0.364411] pci 0000:00:0a.0: reg 1c: [mem 0xf9ffe000-0xf9ffe00f]
[ 0.364432] pci 0000:00:0a.0: supports D1 D2
[ 0.364434] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364438] pci 0000:00:0a.0: PME# disabled
[ 0.364450] pci 0000:00:0b.0: [10de:0562] type 1 class 0x000604
[ 0.364469] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364472] pci 0000:00:0b.0: PME# disabled
[ 0.364485] pci 0000:00:0c.0: [10de:0563] type 1 class 0x000604
[ 0.364504] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364506] pci 0000:00:0c.0: PME# disabled
[ 0.364518] pci 0000:00:0d.0: [10de:0563] type 1 class 0x000604
[ 0.364537] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364539] pci 0000:00:0d.0: PME# disabled
[ 0.364550] pci 0000:00:0e.0: [10de:0563] type 1 class 0x000604
[ 0.364568] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364570] pci 0000:00:0e.0: PME# disabled
[ 0.364582] pci 0000:00:0f.0: [10de:0563] type 1 class 0x000604
[ 0.364600] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364602] pci 0000:00:0f.0: PME# disabled
[ 0.364613] pci 0000:00:10.0: [10de:0563] type 1 class 0x000604
[ 0.364632] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364634] pci 0000:00:10.0: PME# disabled
[ 0.364645] pci 0000:00:11.0: [10de:0563] type 1 class 0x000604
[ 0.364663] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364666] pci 0000:00:11.0: PME# disabled
[ 0.364679] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.364694] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.364707] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.364720] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.364734] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.364791] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.364794] pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.364797] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.364800] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.364802] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.364804] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.364806] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.364808] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.364810] pci 0000:00:08.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.364812] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.364839] pci 0000:02:00.0: [10de:0615] type 0 class 0x000300
[ 0.364847] pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.364855] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.364863] pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.364869] pci 0000:02:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.364875] pci 0000:02:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref]
[ 0.428055] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.428060] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.428063] pci 0000:00:0b.0: bridge window [mem 0xfa000000-0xfdffffff]
[ 0.428067] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.428095] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.428099] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428102] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428105] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428127] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.428130] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428132] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428135] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428154] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.428156] pci 0000:00:0e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428159] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428162] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428180] pci 0000:00:0f.0: PCI bridge to [bus 06-06]
[ 0.428183] pci 0000:00:0f.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428185] pci 0000:00:0f.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428188] pci 0000:00:0f.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428206] pci 0000:00:10.0: PCI bridge to [bus 07-07]
[ 0.428209] pci 0000:00:10.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428211] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428214] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428233] pci 0000:00:11.0: PCI bridge to [bus 08-08]
[ 0.428235] pci 0000:00:11.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428238] pci 0000:00:11.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428241] pci 0000:00:11.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.428438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.428478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.428506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.428528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.428553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.428575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.428599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
[ 0.428621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR16._PRT]
[ 0.428694] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.428765] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.428767] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.434362] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434437] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434508] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434578] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434648] ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434719] ACPI: PCI Interrupt Link [LNEB] (IRQs 5 7 *10 11 16 17 18 19)
[ 0.434788] ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434858] ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434930] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.434999] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.435069] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.435139] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.435210] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.435281] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.435352] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.435422] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 0.435499] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.435569] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.435639] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.435725] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.435727] vgaarb: loaded
[ 0.435728] vgaarb: bridge control possible 0000:02:00.0
[ 0.435873] SCSI subsystem initialized
[ 0.435898] libata version 3.00 loaded.
[ 0.435898] usbcore: registered new interface driver usbfs
[ 0.436031] usbcore: registered new interface driver hub
[ 0.436037] usbcore: registered new device driver usb
[ 0.436075] PCI: Using ACPI for IRQ routing
[ 0.442122] PCI: pci_cache_line_size set to 64 bytes
[ 0.442175] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.442177] reserve RAM buffer: 00000000cffb0000 - 00000000cfffffff
[ 0.442255] NetLabel: Initializing
[ 0.442256] NetLabel: domain hash size = 128
[ 0.442257] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.442267] NetLabel: unlabeled traffic allowed by default
[ 0.442299] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.442304] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.442308] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.456087] Switching to clocksource hpet
[ 0.459643] Switched to NOHz mode on CPU #0
[ 0.459700] Switched to NOHz mode on CPU #1
[ 0.459717] Switched to NOHz mode on CPU #3
[ 0.459763] Switched to NOHz mode on CPU #2
[ 0.460961] AppArmor: AppArmor Filesystem Enabled
[ 0.460990] pnp: PnP ACPI init
[ 0.461007] ACPI: bus type pnp registered
[ 0.461110] pnp 00:00: [bus 00-ff]
[ 0.461115] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.461117] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.461119] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.461121] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.461122] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.461124] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.461126] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.461177] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.461190] pnp 00:01: [dma 4]
[ 0.461191] pnp 00:01: [io 0x0000-0x000f]
[ 0.461193] pnp 00:01: [io 0x0081-0x0083]
[ 0.461194] pnp 00:01: [io 0x0087]
[ 0.461196] pnp 00:01: [io 0x0089-0x008b]
[ 0.461197] pnp 00:01: [io 0x008f]
[ 0.461199] pnp 00:01: [io 0x00c0-0x00df]
[ 0.461214] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.461220] pnp 00:02: [io 0x0061]
[ 0.461237] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.461243] pnp 00:03: [io 0x00f0-0x00ff]
[ 0.461257] pnp 00:03: [irq 13]
[ 0.461273] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.461633] pnp 00:04: [io 0x0378-0x037f]
[ 0.461635] pnp 00:04: [io 0x0778-0x077f]
[ 0.461642] pnp 00:04: [irq 7]
[ 0.461644] pnp 00:04: [dma 3]
[ 0.461740] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.461988] pnp 00:05: [mem 0x000d0000-0x000d3fff window]
[ 0.461990] pnp 00:05: [mem 0x000d4000-0x000d7fff window]
[ 0.461992] pnp 00:05: [mem 0x000de000-0x000dffff window]
[ 0.461994] pnp 00:05: [io 0x0010-0x001f]
[ 0.461996] pnp 00:05: [io 0x0022-0x003f]
[ 0.461999] pnp 00:05: [io 0x0044-0x004d]
[ 0.462000] pnp 00:05: [io 0x0050-0x005f]
[ 0.462002] pnp 00:05: [io 0x0062-0x0063]
[ 0.462003] pnp 00:05: [io 0x0065-0x006f]
[ 0.462005] pnp 00:05: [io 0x0072-0x007f]
[ 0.462006] pnp 00:05: [io 0x0080]
[ 0.462008] pnp 00:05: [io 0x0084-0x0086]
[ 0.462009] pnp 00:05: [io 0x0088]
[ 0.462011] pnp 00:05: [io 0x008c-0x008e]
[ 0.462012] pnp 00:05: [io 0x0090-0x009f]
[ 0.462014] pnp 00:05: [io 0x00a2-0x00bf]
[ 0.462015] pnp 00:05: [io 0x00e0-0x00ef]
[ 0.462017] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.462018] pnp 00:05: [io 0x0800-0x080f]
[ 0.462020] pnp 00:05: [io 0x1000-0x107f]
[ 0.462021] pnp 00:05: [io 0x1080-0x10ff]
[ 0.462023] pnp 00:05: [io 0x1400-0x147f]
[ 0.462024] pnp 00:05: [io 0x1480-0x14ff]
[ 0.462026] pnp 00:05: [io 0x1800-0x187f]
[ 0.462027] pnp 00:05: [io 0x1880-0x18ff]
[ 0.462029] pnp 00:05: [io 0x1c00-0x1c7f]
[ 0.462030] pnp 00:05: [io 0x1c80-0x1cff]
[ 0.462032] pnp 00:05: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.462034] pnp 00:05: [mem 0xfefe0000-0xfefe01ff]
[ 0.462036] pnp 00:05: [mem 0xfefe1000-0xfefe1fff]
[ 0.462037] pnp 00:05: [mem 0xfee01000-0xfeefffff]
[ 0.462104] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.462106] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.462108] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.462111] system 00:05: [io 0x1080-0x10ff] has been reserved
[ 0.462113] system 00:05: [io 0x1400-0x147f] has been reserved
[ 0.462115] system 00:05: [io 0x1480-0x14ff] has been reserved
[ 0.462117] system 00:05: [io 0x1800-0x187f] has been reserved
[ 0.462119] system 00:05: [io 0x1880-0x18ff] has been reserved
[ 0.462121] system 00:05: [io 0x1c00-0x1c7f] has been reserved
[ 0.462123] system 00:05: [io 0x1c80-0x1cff] has been reserved
[ 0.462126] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.462128] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.462131] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.462133] system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.462135] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.462137] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.462140] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462191] pnp 00:06: [mem 0xfed00000-0xfed00fff]
[ 0.462193] pnp 00:06: [irq 0 disabled]
[ 0.462201] pnp 00:06: [irq 8]
[ 0.462217] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.462234] pnp 00:07: [io 0x0070-0x0071]
[ 0.462249] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.462285] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.462287] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.462316] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.462318] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.462320] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462340] pnp 00:09: [io 0x0060]
[ 0.462341] pnp 00:09: [io 0x0064]
[ 0.462349] pnp 00:09: [irq 1]
[ 0.462369] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.462396] pnp 00:0a: [irq 12]
[ 0.462416] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.462599] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.462606] pnp 00:0b: [irq 4]
[ 0.462608] pnp 00:0b: [dma 0 disabled]
[ 0.462652] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.462697] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.462699] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.462701] pnp 00:0c: [io 0x0290-0x029f]
[ 0.462730] system 00:0c: [io 0x0290-0x029f] has been reserved
[ 0.462732] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462764] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.462793] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.462795] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462905] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.462907] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.462909] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.462911] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[ 0.462912] pnp 00:0e: [mem 0xfec00000-0xffffffff]
[ 0.462948] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.462951] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.462953] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.462955] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.462957] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.462960] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.463156] pnp: PnP ACPI: found 15 devices
[ 0.463158] ACPI: ACPI bus type pnp unregistered
[ 0.468793] PCI: max bus depth: 1 pci_try_num: 2
[ 0.468819] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.468820] pci 0000:00:08.0: bridge window [io disabled]
[ 0.468823] pci 0000:00:08.0: bridge window [mem disabled]
[ 0.468825] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 0.468829] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.468831] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.468834] pci 0000:00:0b.0: bridge window [mem 0xfa000000-0xfdffffff]
[ 0.468837] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.468840] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.468841] pci 0000:00:0c.0: bridge window [io disabled]
[ 0.468843] pci 0000:00:0c.0: bridge window [mem disabled]
[ 0.468845] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 0.468848] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.468849] pci 0000:00:0d.0: bridge window [io disabled]
[ 0.468852] pci 0000:00:0d.0: bridge window [mem disabled]
[ 0.468854] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 0.468856] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.468858] pci 0000:00:0e.0: bridge window [io disabled]
[ 0.468860] pci 0000:00:0e.0: bridge window [mem disabled]
[ 0.468862] pci 0000:00:0e.0: bridge window [mem pref disabled]
[ 0.468865] pci 0000:00:0f.0: PCI bridge to [bus 06-06]
[ 0.468866] pci 0000:00:0f.0: bridge window [io disabled]
[ 0.468868] pci 0000:00:0f.0: bridge window [mem disabled]
[ 0.468870] pci 0000:00:0f.0: bridge window [mem pref disabled]
[ 0.468873] pci 0000:00:10.0: PCI bridge to [bus 07-07]
[ 0.468874] pci 0000:00:10.0: bridge window [io disabled]
[ 0.468876] pci 0000:00:10.0: bridge window [mem disabled]
[ 0.468878] pci 0000:00:10.0: bridge window [mem pref disabled]
[ 0.468881] pci 0000:00:11.0: PCI bridge to [bus 08-08]
[ 0.468882] pci 0000:00:11.0: bridge window [io disabled]
[ 0.468885] pci 0000:00:11.0: bridge window [mem disabled]
[ 0.468887] pci 0000:00:11.0: bridge window [mem pref disabled]
[ 0.468895] pci 0000:00:08.0: setting latency timer to 64
[ 0.468899] pci 0000:00:0b.0: setting latency timer to 64
[ 0.468902] pci 0000:00:0c.0: setting latency timer to 64
[ 0.468906] pci 0000:00:0d.0: setting latency timer to 64
[ 0.468909] pci 0000:00:0e.0: setting latency timer to 64
[ 0.468913] pci 0000:00:0f.0: setting latency timer to 64
[ 0.468916] pci 0000:00:10.0: setting latency timer to 64
[ 0.468920] pci 0000:00:11.0: setting latency timer to 64
[ 0.468923] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.468925] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.468927] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.468928] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.468930] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.468932] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.468934] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.468936] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.468938] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.468940] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.468942] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.468944] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.468946] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.468948] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfdffffff]
[ 0.468950] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.468988] NET: Registered protocol family 2
[ 0.469129] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.470234] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.472902] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.473220] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.473223] TCP reno registered
[ 0.473239] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.473270] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.473384] NET: Registered protocol family 1
[ 0.560647] Freeing initrd memory: 13384k freed
[ 0.584161] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584212] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584271] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584329] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584391] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584456] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584525] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584598] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584674] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584753] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.584772] PCI: CLS 64 bytes, default 64
[ 0.586126] PCI-DMA: Disabling AGP.
[ 0.586249] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.586251] PCI-DMA: using GART IOMMU.
[ 0.586254] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.589545] audit: initializing netlink socket (disabled)
[ 0.589565] type=2000 audit(1327012377.584:1): initialized
[ 0.615167] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.633248] VFS: Disk quotas dquot_6.5.2
[ 0.633298] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.633851] fuse init (API version 7.16)
[ 0.633918] msgmni has been set to 7919
[ 0.634447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.634489] io scheduler noop registered
[ 0.634490] io scheduler deadline registered
[ 0.634526] io scheduler cfq registered (default)
[ 0.634654] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.634678] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.634780] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.634797] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.634875] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.634892] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.634965] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.634982] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.635056] pcieport 0000:00:0f.0: setting latency timer to 64
[ 0.635073] pcieport 0000:00:0f.0: irq 44 for MSI/MSI-X
[ 0.635148] pcieport 0000:00:10.0: setting latency timer to 64
[ 0.635166] pcieport 0000:00:10.0: irq 45 for MSI/MSI-X
[ 0.635241] pcieport 0000:00:11.0: setting latency timer to 64
[ 0.635258] pcieport 0000:00:11.0: irq 46 for MSI/MSI-X
[ 0.635335] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.635360] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.635468] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.635473] ACPI: Power Button [PWRB]
[ 0.635506] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.635509] ACPI: Power Button [PWRF]
[ 0.635530] ACPI: acpi_idle registered with cpuidle
[ 0.636759] ERST: Table is not found!
[ 0.636829] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.657152] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.768615] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.768968] Linux agpgart interface v0.103
[ 0.769755] brd: module loaded
[ 0.770103] loop: module loaded
[ 0.770391] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.770647] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.770662] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.770677] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 0.770682] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 0.771029] Fixed MDIO Bus: probed
[ 0.771049] PPP generic driver version 2.4.2
[ 0.771097] tun: Universal TUN/TAP device driver, 1.6
[ 0.771099] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.771166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.771319] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.771329] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.771375] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.771377] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.771441] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.771462] ehci_hcd 0000:00:02.1: debug port 1
[ 0.771469] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.771490] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9ffec00
[ 0.780051] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.780184] hub 1-0:1.0: USB hub found
[ 0.780188] hub 1-0:1.0: 6 ports detected
[ 0.780467] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[ 0.780484] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[ 0.780502] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.780505] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.780539] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.780557] ehci_hcd 0000:00:04.1: debug port 1
[ 0.780563] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.780583] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf9ffe800
[ 0.792052] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.792182] hub 2-0:1.0: USB hub found
[ 0.792186] hub 2-0:1.0: 6 ports detected
[ 0.792285] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.792502] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.792518] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.792537] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.792540] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.792581] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.792609] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9fff000
[ 0.850158] hub 3-0:1.0: USB hub found
[ 0.850164] hub 3-0:1.0: 6 ports detected
[ 0.850459] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[ 0.850463] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[ 0.850482] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.850484] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.850519] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.850549] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9ffd000
[ 0.906157] hub 4-0:1.0: USB hub found
[ 0.906163] hub 4-0:1.0: 6 ports detected
[ 0.906273] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.906356] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.909407] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.909421] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.909559] mousedev: PS/2 mouse device common for all mice
[ 0.909656] rtc_cmos 00:07: RTC can wake from S4
[ 0.909766] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.909801] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.909894] device-mapper: uevent: version 1.0.3
[ 0.909944] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.909951] cpuidle: using governor ladder
[ 0.909953] cpuidle: using governor menu
[ 0.909954] EFI Variables Facility v0.08 2004-May-17
[ 0.910142] TCP cubic registered
[ 0.910229] NET: Registered protocol family 10
[ 0.910610] NET: Registered protocol family 17
[ 0.910625] Registering the dns_resolver key type
[ 0.910708] PM: Hibernation image not present or could not be loaded.
[ 0.910717] registered taskstats version 1
[ 0.925858] Magic number: 12:209:553
[ 0.925878] tty ttyS29: hash matches
[ 0.925910] pci_link PNP0C0F:04: hash matches
[ 0.925975] rtc_cmos 00:07: setting system clock to 2012-01-19 22:32:58 UTC (1327012378)
[ 0.925997] powernow-k8: Found 1 AMD Athlon(tm) II X4 620 Processor (4 cpu cores) (version 2.20.00)
[ 0.926009] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.926010] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.926022] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.926024] EDD information not available.
[ 0.927464] Freeing unused kernel memory: 984k freed
[ 0.927719] Write protecting the kernel read-only data: 10240k
[ 0.927944] Freeing unused kernel memory: 16k freed
[ 0.932154] Freeing unused kernel memory: 1396k freed
[ 0.943803] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.952622] udevd[128]: starting version 173
[ 0.960280] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.960283] vesafb: scrolling: redraw
[ 0.960286] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.960704] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90011100000, using 1216k, total 1216k
[ 0.960860] Console: switching to colour frame buffer device 80x30
[ 0.960870] fb0: VESA VGA frame buffer device
[ 0.978744] xor: automatically using best checksumming function: generic_sse
[ 0.985171] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.985364] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 0.985370] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 0.985375] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.996013] generic_sse: 10686.000 MB/sec
[ 0.996016] xor: using function: generic_sse (10686.000 MB/sec)
[ 0.996611] device-mapper: dm-raid45: initialized v0.2594b
[ 1.049215] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:19:66:f1:0e:0a
[ 1.049219] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.049457] ahci 0000:00:09.0: version 3.0
[ 1.049472] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.049518] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 1.049557] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.049561] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio
[ 1.049564] ahci 0000:00:09.0: setting latency timer to 64
[ 1.050183] scsi0 : ahci
[ 1.050308] scsi1 : ahci
[ 1.050382] scsi2 : ahci
[ 1.050453] scsi3 : ahci
[ 1.050540] ata1: SATA max UDMA/133 abar m8192@0xf9ff6000 port 0xf9ff6100 irq 23
[ 1.050542] ata2: SATA max UDMA/133 abar m8192@0xf9ff6000 port 0xf9ff6180 irq 23
[ 1.050544] ata3: SATA max UDMA/133 abar m8192@0xf9ff6000 port 0xf9ff6200 irq 23
[ 1.050546] ata4: SATA max UDMA/133 abar m8192@0xf9ff6000 port 0xf9ff6280 irq 23
[ 1.050699] pata_amd 0000:00:06.0: version 0.4.1
[ 1.050745] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.051011] scsi4 : pata_amd
[ 1.051084] scsi5 : pata_amd
[ 1.051741] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.051743] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.368068] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.368093] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.368108] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.368133] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.369239] ata2.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.369243] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.370517] ata2.00: configured for UDMA/133
[ 1.370732] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.370892] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.370933] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.371060] sd 1:0:0:0: [sda] Write Protect is off
[ 1.371062] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.371108] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.388366] ata5.01: ATAPI: ATAPI iHAP122 9, 6L0C, max UDMA/66
[ 1.388373] ata5: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
[ 1.404298] ata5.01: configured for UDMA/66
[ 1.406262] scsi 4:0:1:0: CD-ROM ATAPI iHAP122 9 6L0C PQ: 0 ANSI: 5
[ 1.410107] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.410111] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.410241] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 1.410323] sr 4:0:1:0: Attached scsi generic sg1 type 5
[ 1.410489] ata6: port disabled. ignoring.
[ 1.420205] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.420765] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.588046] Refined TSC clocksource calibration: 2609.672 MHz.
[ 1.588058] Switching to clocksource tsc
[ 1.863236] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 7.734515] udevd[377]: starting version 173
[ 7.777316] i2c i2c-0: nForce2 SMBus adapter at 0x1d00
[ 7.777343] i2c i2c-1: nForce2 SMBus adapter at 0x1e00
[ 7.779268] lp: driver loaded but no devices found
[ 7.796749] wmi: Mapper loaded
[ 7.810749] Adding 4369644k swap on /dev/sda5. Priority:-1 extents:1 across:4369644k
[ 7.818861] parport_pc 00:04: reported by Plug and Play ACPI
[ 7.818914] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 7.822599] type=1400 audit(1327001585.392:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=495 comm="apparmor_parser"
[ 7.823018] type=1400 audit(1327001585.392:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=495 comm="apparmor_parser"
[ 7.823255] type=1400 audit(1327001585.392:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=495 comm="apparmor_parser"
[ 7.842260] MCE: In-kernel MCE decoding enabled.
[ 7.842876] EDAC MC: Ver: 2.1.0
[ 7.843637] forcedeth 0000:00:0a.0: irq 47 for MSI/MSI-X
[ 7.844565] AMD64 EDAC driver v3.4.0
[ 7.851526] EDAC amd64: DRAM ECC disabled.
[ 7.851541] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 7.851542] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 7.851544] (Note that use of the override may cause unknown side effects.)
[ 7.894678] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 7.894688] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 7.894691] hda_intel: Disabling MSI
[ 7.894733] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 7.920204] lp0: using parport0 (interrupt-driven).
[ 7.970026] device-mapper: multipath: version 1.3.0 loaded
[ 8.002049] ppdev: user-space parallel port driver
[ 8.565464] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 8.603674] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 8.654805] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 8.851739] type=1400 audit(1327001586.420:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1003 comm="apparmor_parser"
[ 8.852518] type=1400 audit(1327001586.424:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1004 comm="apparmor_parser"
[ 8.852953] type=1400 audit(1327001586.424:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1004 comm="apparmor_parser"
[ 8.853216] type=1400 audit(1327001586.424:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1004 comm="apparmor_parser"
[ 8.855113] type=1400 audit(1327001586.424:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1010 comm="apparmor_parser"
[ 8.856784] type=1400 audit(1327001586.428:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1011 comm="apparmor_parser"
[ 8.857975] type=1400 audit(1327001586.428:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1010 comm="apparmor_parser"
[ 8.940695] init: failsafe main process (942) killed by TERM signal
[ 8.941071] init: apport pre-start process (1045) terminated with status 1
[ 8.947379] init: apport post-stop process (1076) terminated with status 1

20.01.2012 00:42 #223102

ничего криминального не вижу, как и никаких упоминаний об nvidia... это лог после [не]удачной загрузки с установленными драйверами?

20.01.2012 14:52 #223270

Fat-Zer, после неудачной загрузки
я не знаю может это как то связано, у меня не загружаются другие дистрибутивы только убунту (кубунту и прочие основанные на убунту)
вот тема http://linuxforum.ru/viewtopic.php?id=19468

так вот если запустить с pci=conf2 тогда инсталлятор запускается нормально и с нормальным расширением экрана и переключение на виртуальную консоль тоже работает.. правда дисковода не видет

может это как то связанно с собой и уже установленной убунте в грабе надо прописывать какую то опцию ядра7

20.01.2012 19:16 #223344

Может видяха помирает? А в винде работает нормально?

20.01.2012 20:56 #223381

babay2004, видюха достаточно новая что бы помирать!
в винде все норм ставил последние дрова на нее и без каких либо глюков

20.01.2012 21:05 #223384

Ну так не бывает. gts250 - достаточно стандартная видяха. В Убунте драйвер работает. Можно рра подключить с новьём для попробовать. Но лучше 12.04 накатить дейли-билд. Там дровишки 290, всё работает уже впоне стабильно (Гном пробовал, не Юнити).

20.01.2012 21:13 #223385

dead_elf, стоп. у вас же на матери есть своё видео. и тоже nvidia'вское... ЕМНИП nvidia с двумя видеокартами работает нормально, но всякое бывает... для начала хорошо бы попробовать вытащить внешнюю и посмотреть, что будет без неё... + надо посмотреть настройки биоса, какую видео он предпочитает и можно ли отключить встроенную... да и других вариантов "чего попробовать" возрастает до десятка...

как успехи с загрузкой без иксов?

по поводу той темы - чего-то непонятно - там какая-то фигня с cd-rom'ом, с чего он его отказывается находить оный - ума не приложу... грешил бы на контроллер ide или его драйвер, но сомнительно, что там такая критическая ошибка.
ещё c какой-нить работоспособной конфигурации выложите вывод lspci -k.
может что поймём...

babay2004 написал:
Может видяха помирает?

маловероятно...

20.01.2012 23:35 #223411

Fat-Zer, зашел в биос поставил в primary graphic adapter параметр onboard
переставил кабель во встроенную видеокарту и все заработало!
т е убунту с установленными 290 дровами пошла на отлично и инсталляторы дистрибутивов тоже пошли без каких либо опций ядра =)

и как теперь сделать что бы линукс норм воспринимал мою gts250?

21.01.2012 01:14 #223442

в xorg.conf'е нужно перечислять видеокарты с указанием, где они сидят и какие использовать...
lspci -k в студию.

можете ещё погуглить статьи про несколько видеокарт...

21.01.2012 03:30 #223465

вот что показывает lspci -k
но это с 290 дровами когда ко встроенной подключено

Показать

00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
Subsystem: ASRock Incorporation ALiveNF7G-HDready
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
Subsystem: ASRock Incorporation Device 0548
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
Subsystem: ASRock Incorporation Device 0542
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
Subsystem: ASRock Incorporation Device 055e
Kernel driver in use: ohci_hcd
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
Subsystem: ASRock Incorporation Device 055f
Kernel driver in use: ehci_hcd
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
Subsystem: ASRock Incorporation Device 055e
Kernel driver in use: ohci_hcd
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
Subsystem: ASRock Incorporation Device 055f
Kernel driver in use: ehci_hcd
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
Subsystem: ASRock Incorporation Device 0560
Kernel driver in use: pata_amd
Kernel modules: pata_amd
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: ASRock Incorporation Device 3662
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
Subsystem: ASRock Incorporation Device 0550
Kernel driver in use: ahci
Kernel modules: ahci
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
Subsystem: ASRock Incorporation ALiveNF7G-HDready, MCP67 Gigabit Ethernet
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:12.0 VGA compatible controller: nVidia Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2)
Subsystem: ASRock Incorporation Device 053b
Kernel driver in use: nvidia
Kernel modules: nvidia_current, nouveau, nvidiafb
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
02:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce GTS 250] (rev a2)
Subsystem: nVidia Corporation Device 0719
Kernel modules: nvidia_current, nouveau, nvidiafb

или нужно именно когда к дикретной?

21.01.2012 21:50 #223597

вот так должно работать... если нет - выкладывайте логи иксов...

text

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection


Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection


Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection


Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection


Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7050PV"
    BusID          "PCI:0:12:0"
    Screen          0
EndSection


Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 250 GTS"
    BusID          "PCI:2:0:0"
    Screen          0
EndSection


Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 250 GTS"
    BusID          "PCI:2:0:0"
    Screen          1
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Device2" # попробовать тут Device1, не уверен, кто из них VGA, а что DVI
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
22.01.2012 01:08 #223619

не работает
пробовал с Device2 и менял на Device1
это надо было менять только в одном месте?
вот логи

Показать

[ 19.390]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 19.390] X Protocol Version 11, Revision 0
[ 19.390] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu
[ 19.390] Current Operating System: Linux gleb-desktop 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64
[ 19.390] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=39a5c78d-4bcb-4338-95c3-806a11f4b0a9 ro quiet splash vt.handoff=7
[ 19.390] Build Date: 19 October 2011 05:21:26AM
[ 19.390] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
[ 19.390] Current version of pixman: 0.22.2
[ 19.390] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.390] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.390] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 21 23:34:22 2012
[ 19.390] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.390] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.397] (==) ServerLayout "Layout0"
[ 19.397] (**) |-->Screen "Screen0" (0)
[ 19.397] (**) | |-->Monitor "Monitor0"
[ 19.398] (**) | |-->Device "Device2"
[ 19.398] (**) |-->Input Device "Keyboard0"
[ 19.398] (**) |-->Input Device "Mouse0"
[ 19.398] (==) Automatically adding devices
[ 19.398] (==) Automatically enabling devices
[ 19.398] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.398] Entry deleted from font path.
[ 19.398] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 19.398] Entry deleted from font path.
[ 19.398] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 19.398] Entry deleted from font path.
[ 19.398] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 19.398] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 19.398] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 19.398] (WW) Disabling Keyboard0
[ 19.398] (WW) Disabling Mouse0
[ 19.398] (II) Loader magic: 0x7e0220
[ 19.398] (II) Module ABI versions:
[ 19.398] X.Org ANSI C Emulation: 0.4
[ 19.398] X.Org Video Driver: 10.0
[ 19.398] X.Org XInput driver : 12.3
[ 19.398] X.Org Server Extension : 5.0
[ 19.398] (--) PCI:*(0:2:0:0) 10de:0615:10de:0719 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[ 19.398] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.398] (II) LoadModule: "extmod"
[ 19.399] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19.399] (II) Module extmod: vendor="X.Org Foundation"
[ 19.399] compiled for 1.10.4, module version = 1.0.0
[ 19.399] Module class: X.Org Server Extension
[ 19.399] ABI class: X.Org Server Extension, version 5.0
[ 19.399] (II) Loading extension MIT-SCREEN-SAVER
[ 19.399] (II) Loading extension XFree86-VidModeExtension
[ 19.399] (II) Loading extension XFree86-DGA
[ 19.399] (II) Loading extension DPMS
[ 19.399] (II) Loading extension XVideo
[ 19.399] (II) Loading extension XVideo-MotionCompensation
[ 19.399] (II) Loading extension X-Resource
[ 19.399] (II) LoadModule: "dbe"
[ 19.399] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.399] (II) Module dbe: vendor="X.Org Foundation"
[ 19.399] compiled for 1.10.4, module version = 1.0.0
[ 19.399] Module class: X.Org Server Extension
[ 19.399] ABI class: X.Org Server Extension, version 5.0
[ 19.399] (II) Loading extension DOUBLE-BUFFER
[ 19.399] (II) LoadModule: "glx"
[ 19.399] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 20.053] (II) Module glx: vendor="NVIDIA Corporation"
[ 20.180] compiled for 4.0.2, module version = 1.0.0
[ 20.180] Module class: X.Org Server Extension
[ 20.180] (II) NVIDIA GLX Module 290.10 Wed Nov 16 18:01:24 PST 2011
[ 20.180] (II) Loading extension GLX
[ 20.180] (II) LoadModule: "record"
[ 20.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.180] (II) Module record: vendor="X.Org Foundation"
[ 20.180] compiled for 1.10.4, module version = 1.13.0
[ 20.180] Module class: X.Org Server Extension
[ 20.180] ABI class: X.Org Server Extension, version 5.0
[ 20.180] (II) Loading extension RECORD
[ 20.180] (II) LoadModule: "dri"
[ 20.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.180] (II) Module dri: vendor="X.Org Foundation"
[ 20.180] compiled for 1.10.4, module version = 1.0.0
[ 20.180] ABI class: X.Org Server Extension, version 5.0
[ 20.180] (II) Loading extension XFree86-DRI
[ 20.180] (II) LoadModule: "dri2"
[ 20.181] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.181] (II) Module dri2: vendor="X.Org Foundation"
[ 20.181] compiled for 1.10.4, module version = 1.2.0
[ 20.181] ABI class: X.Org Server Extension, version 5.0
[ 20.181] (II) Loading extension DRI2
[ 20.181] (II) LoadModule: "nvidia"
[ 20.181] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 20.266] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 20.266] compiled for 4.0.2, module version = 1.0.0
[ 20.266] Module class: X.Org Video Driver
[ 20.584] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 20.584] (EE) NVIDIA: system's kernel log for additional error messages.
[ 20.584] (II) UnloadModule: "nvidia"
[ 20.584] (II) Unloading nvidia
[ 20.584] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 20.584] (EE) No drivers available.
[ 20.584]
Fatal server error:
[ 20.584] no screens found
[ 20.584]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 20.584] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 20.584]


22.01.2012 07:31 #223629

гмм... =/ что это можно настроить - точно...

в порядке бреда: мне не нравится, что модуль у вас называется nvidia_current, судя по lspci... покажите ls -l /lib/modules/$(uname -r)/video/ [или куда там он устанавливается] если модуль будет зваться не nvidia.ko, то можно его переименовать. !!! возможно потом возникнут проблемы с этим пакетом при обновлении или ещё когда-то !!!. вообще хотелось бы на всяк. пожарный увидеть список файлов пакета nvidia, который вы установили [убунтоводы, кто знает - подскажите как].

без иксов загрузится так и не получилось? если получится, то попробуйте по modprobe'ить модуль и посмотреть, не сыпется ли какая-нить гадость в dmesg. так же попробуйте выгрузить его и стартовать иксы.

22.01.2012 09:00 #223632
Fat-Zer написал:
вообще хотелось бы на всяк. пожарный увидеть список файлов пакета nvidia, который вы установили

Вы про команду? dpkg -L имя пакета

22.01.2012 13:17 #223648

я устанавливал через реп
sudo add-apt-repository ppa:ubuntu-x-swat/x-updates
sudo apt-get install libvdpau1 nvidia-common nvidia-current-modaliases nvidia-settings nvidia-current

ls -l /lib/modules/$(uname -r)/video/ выдает - ls: невозможно получить доступ к /lib/modules/3.0.0-14-generic/video/: Нет такого файла или каталога

dpkg -L nvidia выдает - Пакет «nvidia» не установлен.

нашел папку /lib/modules/3.0.0-14-generic/kernel/drivers/video/nvidia там находится файл nvidiafb.ko

еще есть /lib/modules/3.0.0-14-generic/updates/dkms/nvidia_current.ko

без иксов не получилось(
а если просто остановить иксы это не будет тоже самое?
вот скинул на всякий случай что выдает dmesg но это в иксами и когда подключено к встроенной видеокарте

Показать

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=39a5c78d-4bcb-4338-95c3-806a11f4b0a9 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000affb0000 (usable)
[ 0.000000] BIOS-e820: 00000000affb0000 - 00000000affc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000affc0000 - 00000000afff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68PV-GS, BIOS P2.00 10/12/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xaffb0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000affb0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00afe00000 page 2M
[ 0.000000] 00afe00000 - 00affb0000 page 4k
[ 0.000000] kernel direct mapping tables up to affb0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 1G
[ 0.000000] kernel direct mapping tables up to 140000000 @ affaf000-affb0000
[ 0.000000] RAMDISK: 365ae000 - 372cf000
[ 0.000000] ACPI: RSDP 00000000000fb090 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000affb0000 00040 (v01 101209 RSDT1141 20091012 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000affb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000affb0450 054A5 (v01 AS162 AS162191 00000191 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000affc0000 00040
[ 0.000000] ACPI: APIC 00000000affb0390 00080 (v01 101209 APIC1141 20091012 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000affb0410 0003C (v01 101209 OEMMCFG 20091012 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000affc0040 00071 (v01 101209 OEMB1141 20091012 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000affb5900 00027 (v01 101209 OEMAAFT 20091012 MSFT 00000097)
[ 0.000000] ACPI: NVHD 00000000affc00c0 00554 (v01 101209 NVHDCP 20091012 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000affb5930 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ba00000-ffff88013effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000affb0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 982847
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 702440 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000affb0000 - 00000000affc0000
[ 0.000000] PM: Registered nosave memory: 00000000affc0000 - 00000000afff0000
[ 0.000000] PM: Registered nosave memory: 00000000afff0000 - 00000000b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff780000
[ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s79616 r8192 d22784 u524288
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964922
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic root=UUID=39a5c78d-4bcb-4338-95c3-806a11f4b0a9 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ a4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] PM: Registered nosave memory: 00000000a4000000 - 00000000a8000000
[ 0.000000] Memory: 3717140k/5242880k available (6109k kernel code, 1311492k absent, 214248k reserved, 4876k data, 984k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2593.924 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.84 BogoMIPS (lpj=10375696)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004031] Security Framework initialized
[ 0.004045] AppArmor: AppArmor initialized
[ 0.004046] Yama: becoming mindful.
[ 0.004433] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005781] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006396] Mount-cache hash table entries: 256
[ 0.008087] Initializing cgroup subsys cpuacct
[ 0.008092] Initializing cgroup subsys memory
[ 0.008100] Initializing cgroup subsys devices
[ 0.008102] Initializing cgroup subsys freezer
[ 0.008104] Initializing cgroup subsys net_cls
[ 0.008106] Initializing cgroup subsys blkio
[ 0.008111] Initializing cgroup subsys perf_event
[ 0.008136] tseg: 0000000000
[ 0.008149] CPU: Physical Processor ID: 0
[ 0.008151] CPU: Processor Core ID: 0
[ 0.008153] mce: CPU supports 6 MCE banks
[ 0.009484] ACPI: Core revision 20110413
[ 0.011952] ftrace: allocating 25647 entries in 101 pages
[ 0.016524] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.058619] CPU0: AMD Athlon(tm) II X4 620 Processor stepping 02
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148075] #2
[ 0.148077] smpboot cpu 2: start_ip = 9a000
[ 0.240082] #3 Ok.
[ 0.240083] smpboot cpu 3: start_ip = 9a000
[ 0.332025] Brought up 4 CPUs
[ 0.332027] Total of 4 processors activated (20750.86 BogoMIPS).
[ 0.332627] devtmpfs: initialized
[ 0.332627] PM: Registering ACPI NVS region at affc0000 (196608 bytes)
[ 0.333229] print_constraints: dummy:
[ 0.333260] Time: 11:51:28 Date: 01/22/12
[ 0.333292] NET: Registered protocol family 16
[ 0.333389] node 0 link 0: io port [1000, ffffff]
[ 0.333392] TOM: 00000000c0000000 aka 3072M
[ 0.333394] Fam 10h mmconf [e0000000, efffffff]
[ 0.333396] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.333402] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.333405] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.333407] node 0 link 0: mmio [a0000, bffff]
[ 0.333409] TOM2: 0000000140000000 aka 5120M
[ 0.333411] bus: [00, 07] on node 0 link 0
[ 0.333414] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.333416] bus: 00 index 1 [mem 0xc0000000-0xdfffffff]
[ 0.333418] bus: 00 index 2 [mem 0xf0000000-0xffffffff]
[ 0.333419] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[ 0.333421] bus: 00 index 4 [mem 0x140000000-0xfcffffffff]
[ 0.333428] Extended Config Space enabled on 1 nodes
[ 0.333450] ACPI: bus type pci registered
[ 0.333301] Trying to unpack rootfs image as initramfs...
[ 0.333509] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.333513] PCI: not using MMCONFIG
[ 0.333514] PCI: Using configuration type 1 for base access
[ 0.333516] PCI: Using configuration type 1 for extended access
[ 0.334036] bio: create slab <bio-0> at 0
[ 0.334036] ACPI: EC: Look up EC in DSDT
[ 0.336824] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.338804] ACPI: Interpreter enabled
[ 0.338807] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.338824] ACPI: Using IOAPIC for interrupt routing
[ 0.338841] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.339503] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.363909] ACPI: No dock devices found.
[ 0.363912] HEST: Table not found.
[ 0.363916] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.364040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.364171] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.364174] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.364176] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.364178] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.364180] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.364182] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.364207] pci 0000:00:00.0: [10de:0547] type 0 class 0x000500
[ 0.364357] pci 0000:00:01.0: [10de:0548] type 0 class 0x000601
[ 0.364363] pci 0000:00:01.0: reg 10: [io 0x1f00-0x1fff]
[ 0.364395] pci 0000:00:01.1: [10de:0542] type 0 class 0x000c05
[ 0.364405] pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc3f]
[ 0.364420] pci 0000:00:01.1: reg 20: [io 0x1d00-0x1d3f]
[ 0.364425] pci 0000:00:01.1: reg 24: [io 0x1e00-0x1e3f]
[ 0.364444] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.364449] pci 0000:00:01.1: PME# disabled
[ 0.364465] pci 0000:00:02.0: [10de:055e] type 0 class 0x000c03
[ 0.364473] pci 0000:00:02.0: reg 10: [mem 0xf9fff000-0xf9ffffff]
[ 0.364501] pci 0000:00:02.0: supports D1 D2
[ 0.364503] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364506] pci 0000:00:02.0: PME# disabled
[ 0.364517] pci 0000:00:02.1: [10de:055f] type 0 class 0x000c03
[ 0.364526] pci 0000:00:02.1: reg 10: [mem 0xf9ffec00-0xf9ffecff]
[ 0.364558] pci 0000:00:02.1: supports D1 D2
[ 0.364560] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364563] pci 0000:00:02.1: PME# disabled
[ 0.364582] pci 0000:00:04.0: [10de:055e] type 0 class 0x000c03
[ 0.364590] pci 0000:00:04.0: reg 10: [mem 0xf9ffd000-0xf9ffdfff]
[ 0.364618] pci 0000:00:04.0: supports D1 D2
[ 0.364619] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364622] pci 0000:00:04.0: PME# disabled
[ 0.364633] pci 0000:00:04.1: [10de:055f] type 0 class 0x000c03
[ 0.364642] pci 0000:00:04.1: reg 10: [mem 0xf9ffe800-0xf9ffe8ff]
[ 0.364674] pci 0000:00:04.1: supports D1 D2
[ 0.364676] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364679] pci 0000:00:04.1: PME# disabled
[ 0.364695] pci 0000:00:06.0: [10de:0560] type 0 class 0x000101
[ 0.364715] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
[ 0.364740] pci 0000:00:07.0: [10de:055c] type 0 class 0x000403
[ 0.364751] pci 0000:00:07.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff]
[ 0.364782] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.364785] pci 0000:00:07.0: PME# disabled
[ 0.364802] pci 0000:00:08.0: [10de:0561] type 1 class 0x000604
[ 0.364833] pci 0000:00:09.0: [10de:0550] type 0 class 0x000101
[ 0.364840] pci 0000:00:09.0: reg 10: [io 0x0f80-0x0f87]
[ 0.364844] pci 0000:00:09.0: reg 14: [io 0x0f00-0x0f03]
[ 0.364847] pci 0000:00:09.0: reg 18: [io 0x0e80-0x0e87]
[ 0.364851] pci 0000:00:09.0: reg 1c: [io 0x0e00-0x0e03]
[ 0.364855] pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f]
[ 0.364859] pci 0000:00:09.0: reg 24: [mem 0xf9ff6000-0xf9ff7fff]
[ 0.364885] pci 0000:00:0a.0: [10de:054c] type 0 class 0x000200
[ 0.364894] pci 0000:00:0a.0: reg 10: [mem 0xf9ffc000-0xf9ffcfff]
[ 0.364899] pci 0000:00:0a.0: reg 14: [io 0xc880-0xc887]
[ 0.364903] pci 0000:00:0a.0: reg 18: [mem 0xf9ffe400-0xf9ffe4ff]
[ 0.364907] pci 0000:00:0a.0: reg 1c: [mem 0xf9ffe000-0xf9ffe00f]
[ 0.364929] pci 0000:00:0a.0: supports D1 D2
[ 0.364930] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364934] pci 0000:00:0a.0: PME# disabled
[ 0.364946] pci 0000:00:0b.0: [10de:0562] type 1 class 0x000604
[ 0.364966] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364968] pci 0000:00:0b.0: PME# disabled
[ 0.364982] pci 0000:00:0c.0: [10de:0563] type 1 class 0x000604
[ 0.365000] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.365003] pci 0000:00:0c.0: PME# disabled
[ 0.365014] pci 0000:00:0d.0: [10de:0563] type 1 class 0x000604
[ 0.365033] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.365035] pci 0000:00:0d.0: PME# disabled
[ 0.365046] pci 0000:00:0e.0: [10de:0563] type 1 class 0x000604
[ 0.365065] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.365067] pci 0000:00:0e.0: PME# disabled
[ 0.365078] pci 0000:00:0f.0: [10de:0563] type 1 class 0x000604
[ 0.365097] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.365099] pci 0000:00:0f.0: PME# disabled
[ 0.365110] pci 0000:00:10.0: [10de:0563] type 1 class 0x000604
[ 0.365128] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.365130] pci 0000:00:10.0: PME# disabled
[ 0.365142] pci 0000:00:11.0: [10de:0563] type 1 class 0x000604
[ 0.365160] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.365162] pci 0000:00:11.0: PME# disabled
[ 0.365172] pci 0000:00:12.0: [10de:053b] type 0 class 0x000300
[ 0.365178] pci 0000:00:12.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.365184] pci 0000:00:12.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.365189] pci 0000:00:12.0: reg 1c: [mem 0xf7000000-0xf7ffffff 64bit]
[ 0.365194] pci 0000:00:12.0: reg 30: [mem 0xf9fc0000-0xf9fdffff pref]
[ 0.365211] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.365229] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.365241] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.365254] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.365269] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.365326] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.365329] pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.365332] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.365335] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.365337] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.365339] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.365342] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.365344] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.365346] pci 0000:00:08.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.365348] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.365374] pci 0000:02:00.0: [10de:0615] type 0 class 0x000300
[ 0.365382] pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.365390] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.365398] pci 0000:02:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.365404] pci 0000:02:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.365410] pci 0000:02:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref]
[ 0.428058] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.428064] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.428067] pci 0000:00:0b.0: bridge window [mem 0xfa000000-0xfdffffff]
[ 0.428070] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.428102] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.428105] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428108] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428111] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428130] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.428136] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428139] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428142] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428160] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.428163] pci 0000:00:0e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428165] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428168] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428187] pci 0000:00:0f.0: PCI bridge to [bus 06-06]
[ 0.428189] pci 0000:00:0f.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428192] pci 0000:00:0f.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428195] pci 0000:00:0f.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428214] pci 0000:00:10.0: PCI bridge to [bus 07-07]
[ 0.428217] pci 0000:00:10.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428219] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428222] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428240] pci 0000:00:11.0: PCI bridge to [bus 08-08]
[ 0.428243] pci 0000:00:11.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.428245] pci 0000:00:11.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.428248] pci 0000:00:11.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.428266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.428448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.428492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.428516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.428539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.428563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.428585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.428609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
[ 0.428631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR16._PRT]
[ 0.428707] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.428779] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.428781] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.434687] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434762] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434832] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434902] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.434975] ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.435047] ACPI: PCI Interrupt Link [LNEB] (IRQs 5 7 *10 11 16 17 18 19)
[ 0.435116] ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.435185] ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 16 17 18 19) *0, disabled.
[ 0.435257] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.435328] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.435397] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.435467] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.435537] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
[ 0.435608] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.435680] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.435750] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[ 0.435827] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.435898] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.435968] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.436068] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.436073] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.436075] vgaarb: loaded
[ 0.436076] vgaarb: bridge control possible 0000:02:00.0
[ 0.436077] vgaarb: bridge control possible 0000:00:12.0
[ 0.436240] SCSI subsystem initialized
[ 0.436264] libata version 3.00 loaded.
[ 0.436264] usbcore: registered new interface driver usbfs
[ 0.436264] usbcore: registered new interface driver hub
[ 0.436264] usbcore: registered new device driver usb
[ 0.436264] PCI: Using ACPI for IRQ routing
[ 0.442483] PCI: pci_cache_line_size set to 64 bytes
[ 0.442538] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.442540] reserve RAM buffer: 00000000affb0000 - 00000000afffffff
[ 0.442616] NetLabel: Initializing
[ 0.442617] NetLabel: domain hash size = 128
[ 0.442619] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.442630] NetLabel: unlabeled traffic allowed by default
[ 0.447766] AppArmor: AppArmor Filesystem Enabled
[ 0.447800] pnp: PnP ACPI init
[ 0.447815] ACPI: bus type pnp registered
[ 0.447925] pnp 00:00: [bus 00-ff]
[ 0.447927] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.447929] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.447931] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.447933] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.447934] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.447936] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.447938] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.447990] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.448003] pnp 00:01: [dma 4]
[ 0.448004] pnp 00:01: [io 0x0000-0x000f]
[ 0.448006] pnp 00:01: [io 0x0081-0x0083]
[ 0.448008] pnp 00:01: [io 0x0087]
[ 0.448009] pnp 00:01: [io 0x0089-0x008b]
[ 0.448011] pnp 00:01: [io 0x008f]
[ 0.448034] pnp 00:01: [io 0x00c0-0x00df]
[ 0.448052] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.448059] pnp 00:02: [io 0x0061]
[ 0.448073] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.448084] pnp 00:03: [io 0x00f0-0x00ff]
[ 0.448099] pnp 00:03: [irq 13]
[ 0.448113] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.448481] pnp 00:04: [io 0x0378-0x037f]
[ 0.448483] pnp 00:04: [io 0x0778-0x077f]
[ 0.448490] pnp 00:04: [irq 7]
[ 0.448492] pnp 00:04: [dma 3]
[ 0.448592] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.448844] pnp 00:05: [mem 0x000d0000-0x000d3fff window]
[ 0.448846] pnp 00:05: [mem 0x000d4000-0x000d7fff window]
[ 0.448848] pnp 00:05: [mem 0x000de000-0x000dffff window]
[ 0.448849] pnp 00:05: [io 0x0010-0x001f]
[ 0.448851] pnp 00:05: [io 0x0022-0x003f]
[ 0.448852] pnp 00:05: [io 0x0044-0x004d]
[ 0.448854] pnp 00:05: [io 0x0050-0x005f]
[ 0.448855] pnp 00:05: [io 0x0062-0x0063]
[ 0.448857] pnp 00:05: [io 0x0065-0x006f]
[ 0.448858] pnp 00:05: [io 0x0072-0x007f]
[ 0.448860] pnp 00:05: [io 0x0080]
[ 0.448861] pnp 00:05: [io 0x0084-0x0086]
[ 0.448862] pnp 00:05: [io 0x0088]
[ 0.448864] pnp 00:05: [io 0x008c-0x008e]
[ 0.448865] pnp 00:05: [io 0x0090-0x009f]
[ 0.448867] pnp 00:05: [io 0x00a2-0x00bf]
[ 0.448868] pnp 00:05: [io 0x00e0-0x00ef]
[ 0.448870] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.448871] pnp 00:05: [io 0x0800-0x080f]
[ 0.448873] pnp 00:05: [io 0x1000-0x107f]
[ 0.448874] pnp 00:05: [io 0x1080-0x10ff]
[ 0.448875] pnp 00:05: [io 0x1400-0x147f]
[ 0.448877] pnp 00:05: [io 0x1480-0x14ff]
[ 0.448878] pnp 00:05: [io 0x1800-0x187f]
[ 0.448880] pnp 00:05: [io 0x1880-0x18ff]
[ 0.448881] pnp 00:05: [io 0x1c00-0x1c7f]
[ 0.448883] pnp 00:05: [io 0x1c80-0x1cff]
[ 0.448885] pnp 00:05: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.448887] pnp 00:05: [mem 0xfefe0000-0xfefe01ff]
[ 0.448888] pnp 00:05: [mem 0xfefe1000-0xfefe1fff]
[ 0.448892] pnp 00:05: [mem 0xfee01000-0xfeefffff]
[ 0.448959] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.448961] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.448963] system 00:05: [io 0x1000-0x107f] has been reserved
[ 0.448965] system 00:05: [io 0x1080-0x10ff] has been reserved
[ 0.448967] system 00:05: [io 0x1400-0x147f] has been reserved
[ 0.448969] system 00:05: [io 0x1480-0x14ff] has been reserved
[ 0.448971] system 00:05: [io 0x1800-0x187f] has been reserved
[ 0.448974] system 00:05: [io 0x1880-0x18ff] has been reserved
[ 0.448976] system 00:05: [io 0x1c00-0x1c7f] has been reserved
[ 0.448978] system 00:05: [io 0x1c80-0x1cff] has been reserved
[ 0.448980] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.448983] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.448985] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.448987] system 00:05: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.448990] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.448992] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.448995] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449033] pnp 00:06: [io 0x0070-0x0071]
[ 0.449041] pnp 00:06: [irq 8]
[ 0.449057] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.449092] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.449093] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.449122] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.449125] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.449127] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449146] pnp 00:08: [io 0x0060]
[ 0.449148] pnp 00:08: [io 0x0064]
[ 0.449155] pnp 00:08: [irq 1]
[ 0.449175] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.449203] pnp 00:09: [irq 12]
[ 0.449222] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.449409] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.449417] pnp 00:0a: [irq 4]
[ 0.449418] pnp 00:0a: [dma 0 disabled]
[ 0.449461] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.449505] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.449508] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.449509] pnp 00:0b: [io 0x0290-0x029f]
[ 0.449539] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 0.449542] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449574] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.449603] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.449605] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449718] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.449720] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.449721] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.449723] pnp 00:0d: [mem 0x00100000-0xbfffffff]
[ 0.449725] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[ 0.449763] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.449765] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.449767] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.449769] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.449772] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.449774] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.449971] pnp: PnP ACPI: found 14 devices
[ 0.449973] ACPI: ACPI bus type pnp unregistered
[ 0.455577] Switching to clocksource acpi_pm
[ 0.455727] PCI: max bus depth: 1 pci_try_num: 2
[ 0.455753] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.455755] pci 0000:00:08.0: bridge window [io disabled]
[ 0.455757] pci 0000:00:08.0: bridge window [mem disabled]
[ 0.455760] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 0.455764] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.455766] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 0.455769] pci 0000:00:0b.0: bridge window [mem 0xfa000000-0xfdffffff]
[ 0.455772] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.455775] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.455777] pci 0000:00:0c.0: bridge window [io disabled]
[ 0.455779] pci 0000:00:0c.0: bridge window [mem disabled]
[ 0.455781] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 0.455784] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.455785] pci 0000:00:0d.0: bridge window [io disabled]
[ 0.455787] pci 0000:00:0d.0: bridge window [mem disabled]
[ 0.455789] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 0.455792] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
[ 0.455794] pci 0000:00:0e.0: bridge window [io disabled]
[ 0.455796] pci 0000:00:0e.0: bridge window [mem disabled]
[ 0.455798] pci 0000:00:0e.0: bridge window [mem pref disabled]
[ 0.455801] pci 0000:00:0f.0: PCI bridge to [bus 06-06]
[ 0.455802] pci 0000:00:0f.0: bridge window [io disabled]
[ 0.455804] pci 0000:00:0f.0: bridge window [mem disabled]
[ 0.455806] pci 0000:00:0f.0: bridge window [mem pref disabled]
[ 0.455809] pci 0000:00:10.0: PCI bridge to [bus 07-07]
[ 0.455811] pci 0000:00:10.0: bridge window [io disabled]
[ 0.455813] pci 0000:00:10.0: bridge window [mem disabled]
[ 0.455815] pci 0000:00:10.0: bridge window [mem pref disabled]
[ 0.455818] pci 0000:00:11.0: PCI bridge to [bus 08-08]
[ 0.455819] pci 0000:00:11.0: bridge window [io disabled]
[ 0.455821] pci 0000:00:11.0: bridge window [mem disabled]
[ 0.455823] pci 0000:00:11.0: bridge window [mem pref disabled]
[ 0.455832] pci 0000:00:08.0: setting latency timer to 64
[ 0.455836] pci 0000:00:0b.0: setting latency timer to 64
[ 0.455840] pci 0000:00:0c.0: setting latency timer to 64
[ 0.455843] pci 0000:00:0d.0: setting latency timer to 64
[ 0.455847] pci 0000:00:0e.0: setting latency timer to 64
[ 0.455850] pci 0000:00:0f.0: setting latency timer to 64
[ 0.455854] pci 0000:00:10.0: setting latency timer to 64
[ 0.455858] pci 0000:00:11.0: setting latency timer to 64
[ 0.455861] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.455863] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.455865] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.455867] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.455869] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.455871] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.455873] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.455875] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.455876] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.455878] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.455880] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.455882] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.455884] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.455886] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfdffffff]
[ 0.455888] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.455928] NET: Registered protocol family 2
[ 0.455928] Switched to NOHz mode on CPU #0
[ 0.455582] Switched to NOHz mode on CPU #2
[ 0.455928] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.455616] Switched to NOHz mode on CPU #1
[ 0.455588] Switched to NOHz mode on CPU #3
[ 0.455928] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.456262] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.456592] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.456595] TCP reno registered
[ 0.456608] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.456642] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.456762] NET: Registered protocol family 1
[ 0.560696] Freeing initrd memory: 13444k freed
[ 0.568174] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568225] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568285] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568344] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568406] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568472] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568542] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568616] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568693] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568775] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.568780] pci 0000:00:12.0: Boot video device
[ 0.568797] PCI: CLS 64 bytes, default 64
[ 0.570724] PCI-DMA: Disabling AGP.
[ 0.573547] PCI-DMA: aperture base @ a4000000 size 65536 KB
[ 0.573549] PCI-DMA: using GART IOMMU.
[ 0.573552] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.576797] audit: initializing netlink socket (disabled)
[ 0.576817] type=2000 audit(1327233087.572:1): initialized
[ 0.602060] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.619173] VFS: Disk quotas dquot_6.5.2
[ 0.619223] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.619781] fuse init (API version 7.16)
[ 0.619846] msgmni has been set to 7415
[ 0.620469] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.620518] io scheduler noop registered
[ 0.620520] io scheduler deadline registered
[ 0.620552] io scheduler cfq registered (default)
[ 0.620713] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.620743] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.620858] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.620876] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.620967] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.620985] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.621078] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.621098] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 0.621192] pcieport 0000:00:0f.0: setting latency timer to 64
[ 0.621209] pcieport 0000:00:0f.0: irq 44 for MSI/MSI-X
[ 0.621300] pcieport 0000:00:10.0: setting latency timer to 64
[ 0.621316] pcieport 0000:00:10.0: irq 45 for MSI/MSI-X
[ 0.621407] pcieport 0000:00:11.0: setting latency timer to 64
[ 0.621423] pcieport 0000:00:11.0: irq 46 for MSI/MSI-X
[ 0.621484] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.621503] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.621599] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.621604] ACPI: Power Button [PWRB]
[ 0.621638] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.621641] ACPI: Power Button [PWRF]
[ 0.621664] ACPI: acpi_idle registered with cpuidle
[ 0.622879] ERST: Table is not found!
[ 0.622941] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.643278] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.865175] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.865441] Linux agpgart interface v0.103
[ 0.866239] brd: module loaded
[ 0.866585] loop: module loaded
[ 0.866891] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.867171] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.867187] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.867198] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 0.867203] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 0.867598] Fixed MDIO Bus: probed
[ 0.867620] PPP generic driver version 2.4.2
[ 0.867672] tun: Universal TUN/TAP device driver, 1.6
[ 0.867673] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.867741] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.867913] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.867923] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.867940] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.867942] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.867992] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.868050] ehci_hcd 0000:00:02.1: debug port 1
[ 0.868057] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.868077] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9ffec00
[ 0.880057] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.880189] hub 1-0:1.0: USB hub found
[ 0.880193] hub 1-0:1.0: 6 ports detected
[ 0.880539] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[ 0.880555] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[ 0.880573] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.880576] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.880609] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.880630] ehci_hcd 0000:00:04.1: debug port 1
[ 0.880637] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.880657] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf9ffe800
[ 0.892056] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.892186] hub 2-0:1.0: USB hub found
[ 0.892189] hub 2-0:1.0: 6 ports detected
[ 0.892289] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.892567] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.892582] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.892602] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.892604] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.892643] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.892673] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9fff000
[ 0.950170] hub 3-0:1.0: USB hub found
[ 0.950176] hub 3-0:1.0: 6 ports detected
[ 0.950541] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[ 0.950545] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[ 0.950564] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.950567] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.950599] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.950629] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9ffd000
[ 1.006169] hub 4-0:1.0: USB hub found
[ 1.006175] hub 4-0:1.0: 6 ports detected
[ 1.006292] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.006371] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.009630] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.009643] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.009751] mousedev: PS/2 mouse device common for all mice
[ 1.009834] rtc_cmos 00:06: RTC can wake from S4
[ 1.009946] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.009978] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 1.010075] device-mapper: uevent: version 1.0.3
[ 1.010125] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.010133] cpuidle: using governor ladder
[ 1.010134] cpuidle: using governor menu
[ 1.010136] EFI Variables Facility v0.08 2004-May-17
[ 1.010323] TCP cubic registered
[ 1.010409] NET: Registered protocol family 10
[ 1.010793] NET: Registered protocol family 17
[ 1.010809] Registering the dns_resolver key type
[ 1.010896] PM: Hibernation image not present or could not be loaded.
[ 1.010905] registered taskstats version 1
[ 1.025517] Magic number: 12:127:884
[ 1.025636] rtc_cmos 00:06: setting system clock to 2012-01-22 11:51:28 UTC (1327233088)
[ 1.025661] powernow-k8: Found 1 AMD Athlon(tm) II X4 620 Processor (4 cpu cores) (version 2.20.00)
[ 1.025700] powernow-k8: 0 : pstate 0 (2600 MHz)
[ 1.025702] powernow-k8: 1 : pstate 1 (1900 MHz)
[ 1.025703] powernow-k8: 2 : pstate 2 (1400 MHz)
[ 1.025705] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.026042] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.026045] EDD information not available.
[ 1.027482] Freeing unused kernel memory: 984k freed
[ 1.027736] Write protecting the kernel read-only data: 10240k
[ 1.027980] Freeing unused kernel memory: 16k freed
[ 1.032260] Freeing unused kernel memory: 1396k freed
[ 1.047563] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.052903] udevd[128]: starting version 173
[ 1.079312] pata_amd 0000:00:06.0: version 0.4.1
[ 1.079359] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.080525] scsi0 : pata_amd
[ 1.081886] scsi1 : pata_amd
[ 1.082609] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.082612] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.084356] ahci 0000:00:09.0: version 3.0
[ 1.084376] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.084405] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 1.084452] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.084455] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio
[ 1.084459] ahci 0000:00:09.0: setting latency timer to 64
[ 1.086697] scsi2 : ahci
[ 1.086883] scsi3 : ahci
[ 1.087207] scsi4 : ahci
[ 1.087278] scsi5 : ahci
[ 1.087368] ata3: SATA max UDMA/133 abar m8192@0xf9ff6000 port 0xf9ff6100 irq 23
[ 1.087371] ata4: SATA max UDMA/133 abar m8192@0xf9ff6000 port 0xf9ff6180 irq 23
[ 1.087373] ata5: SATA max UDMA/133 abar m8192@0xf9ff6000 port 0xf9ff6200 irq 23
[ 1.087376] ata6: SATA max UDMA/133 abar m8192@0xf9ff6000 port 0xf9ff6280 irq 23
[ 1.089287] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.089500] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 1.089508] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.089513] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.153224] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:19:66:f1:0e:0a
[ 1.153228] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.404069] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.404090] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.404109] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.404137] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.405177] ata4.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 1.405181] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.406443] ata4.00: configured for UDMA/133
[ 1.415602] ata1.01: ATAPI: ATAPI iHAP122 9, 6L0C, max UDMA/66
[ 1.415610] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
[ 1.428293] ata1.01: configured for UDMA/66
[ 1.430471] scsi 0:0:1:0: CD-ROM ATAPI iHAP122 9 6L0C PQ: 0 ANSI: 5
[ 1.434091] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.434095] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.434225] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.434309] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.434492] ata2: port disabled. ignoring.
[ 1.434702] scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 1.434858] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.434871] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.435000] sd 3:0:0:0: [sda] Write Protect is off
[ 1.435003] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.435045] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.474246] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.474833] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.576064] Refined TSC clocksource calibration: 2593.650 MHz.
[ 1.576076] Switching to clocksource tsc
[ 2.000358] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 11.640774] Adding 4369644k swap on /dev/sda5. Priority:-1 extents:1 across:4369644k
[ 11.650487] udevd[366]: starting version 173
[ 11.714889] lp: driver loaded but no devices found
[ 11.716499] i2c i2c-0: nForce2 SMBus adapter at 0x1d00
[ 11.716538] i2c i2c-1: nForce2 SMBus adapter at 0x1e00
[ 11.720076] MCE: In-kernel MCE decoding enabled.
[ 11.722404] EDAC MC: Ver: 2.1.0
[ 11.722763] type=1400 audit(1327222299.191:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=455 comm="apparmor_parser"
[ 11.723180] type=1400 audit(1327222299.191:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=455 comm="apparmor_parser"
[ 11.723450] type=1400 audit(1327222299.191:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=455 comm="apparmor_parser"
[ 11.729466] AMD64 EDAC driver v3.4.0
[ 11.731844] EDAC amd64: DRAM ECC disabled.
[ 11.731857] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 11.731859] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 11.731860] (Note that use of the override may cause unknown side effects.)
[ 11.734506] wmi: Mapper loaded
[ 11.775553] parport_pc 00:04: reported by Plug and Play ACPI
[ 11.775609] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 11.866992] ppdev: user-space parallel port driver
[ 11.870872] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 11.870880] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 11.870883] hda_intel: Disabling MSI
[ 11.870920] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 11.872265] lp0: using parport0 (interrupt-driven).
[ 12.085769] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 12.449974] nvidia: module license 'NVIDIA' taints kernel.
[ 12.449978] Disabling lock debugging due to kernel taint
[ 12.592563] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 12.696673] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
[ 12.696680] nvidia 0000:00:12.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
[ 12.696687] nvidia 0000:00:12.0: setting latency timer to 64
[ 12.696691] vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.696694] vgaarb: transferring owner from PCI:0000:00:12.0 to PCI:0000:02:00.0
[ 12.697283] nvidia 0000:02:00.0: enabling device (0000 -> 0003)
[ 12.697447] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 12.697467] nvidia 0000:02:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 12.697475] nvidia 0000:02:00.0: setting latency timer to 64
[ 12.697479] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 12.697531] NVRM: The NVIDIA GPU 0000:02:00.0 (PCI ID: 10de:0615) installed
[ 12.697533] NVRM: in this system is not supported by the 290.10 NVIDIA Linux
[ 12.697534] NVRM: graphics driver release. Please see 'Appendix A -
[ 12.697535] NVRM: Supported NVIDIA GPU Products' in this release's README,
[ 12.697535] NVRM: available on the Linux graphics driver download page at
[ 12.697536] NVRM: www.nvidia.com.
[ 12.697542] nvidia 0000:02:00.0: PCI INT A disabled
[ 12.698331] nvidia: probe of 0000:02:00.0 failed with error -1
[ 12.698381] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 12.698384] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 12.769567] type=1400 audit(1327222300.239:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=857 comm="apparmor_parser"
[ 12.770033] type=1400 audit(1327222300.239:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=858 comm="apparmor_parser"
[ 12.770473] type=1400 audit(1327222300.239:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser"
[ 12.770746] type=1400 audit(1327222300.239:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser"
[ 12.772250] type=1400 audit(1327222300.243:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=861 comm="apparmor_parser"
[ 12.772796] type=1400 audit(1327222300.243:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=861 comm="apparmor_parser"
[ 12.774159] type=1400 audit(1327222300.243:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=859 comm="apparmor_parser"
[ 12.791142] forcedeth 0000:00:0a.0: irq 47 for MSI/MSI-X
[ 12.852488] init: failsafe main process (796) killed by TERM signal
[ 12.856172] init: apport pre-start process (895) terminated with status 1
[ 12.862028] init: apport post-stop process (917) terminated with status 1

зы может попытаться установить дрова не из репа а из оф сайта вручную?

Войдите или зарегистрируйтесь, чтобы ответить.