сантехник, может вы это пишете по CTRL+ALT+F1?
дык там и без dmesg работает
LinuxForum.Fans
Мобильный инет
Автор: danser
41 сообщений
6955 просмотров
и иксах
и иксах
значит кто-то за вас набрал...
(имеется ввиду создатель дистрибутива)
ну или перенаправил зачем-то буфер ядра во все консоли...
вот ни га дяй smile
[quote=koldunboroda]
раньше выходил в интернт подсоеденяя кпк к Usb, включая общий интернет, он мне автоматом создавал нвоое подключение eth и все работало,
сейчас он не создает новое подключение eth
и естественно интернет с мобильного не получает
(хочуна всякий что отметить кпк с windows mobile и интерет используются через локальную сеть, а не как через модем)
1 Открываем консоль
2 команда dmesg запоминаем последнюю строку
3 подключаем КПК
4 команда dmesg смотрим, что появилось и в студию[/quote]
както много плочилось но вот
text
[ 0.397032] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc81f]
[ 0.397045] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7cf7800-0xf7cf7bff]
[ 0.397096] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.397104] pci 0000:00:1f.2: PME# disabled
[ 0.397329] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbffc000-0xfbffffff]
[ 0.397438] pci 0000:02:00.0: supports D1 D2
[ 0.397443] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.397453] pci 0000:02:00.0: PME# disabled
[ 0.397553] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.397566] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.397658] pci 0000:01:00.0: reg 10 64bit mmio: [0xf7fc0000-0xf7ffffff]
[ 0.397674] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.397769] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.397779] pci 0000:01:00.0: PME# disabled
[ 0.397866] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff]
[ 0.397875] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
[ 0.397949] pci 0000:00:1e.0: transparent bridge
[ 0.397995] pci_bus 0000:00: on NUMA node 0
[ 0.398007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.398322] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.398453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.398561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.420881] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.421137] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.421388] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.421640] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.421892] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.422145] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.422396] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.422648] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.422884] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.422907] vgaarb: loaded
[ 0.422951] PCI: Using ACPI for IRQ routing
[ 0.422951] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.422951] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.432011] Switching to clocksource hpet
[ 0.434440] pnp: PnP ACPI init
[ 0.434478] ACPI: bus type pnp registered
[ 0.438746] pnp: PnP ACPI: found 13 devices
[ 0.438752] ACPI: ACPI bus type pnp unregistered
[ 0.438761] PnPBIOS: Disabled by ACPI PNP
[ 0.438786] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.438794] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.438814] system 00:08: ioport range 0x25c-0x25f has been reserved
[ 0.438822] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.438829] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.438837] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.438845] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.438852] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.438861] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.438869] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.438877] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.438885] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.438893] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.438908] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.438916] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.438930] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.438943] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.438951] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.438959] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.438967] system 00:0c: iomem range 0x100000-0x7f6fffff could not be reserved
[ 0.438975] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.474141] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.474150] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.474161] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.474171] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.474184] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.474192] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.474202] pci 0000:00:1c.1: MEM window: 0xf8000000-0xfbffffff
[ 0.474211] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.474224] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.474232] pci 0000:00:1c.3: IO window: 0xe000-0xefff
[ 0.474242] pci 0000:00:1c.3: MEM window: 0xf7f00000-0xf7ffffff
[ 0.474252] pci 0000:00:1c.3: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.474265] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.474269] pci 0000:00:1e.0: IO window: disabled
[ 0.474279] pci 0000:00:1e.0: MEM window: disabled
[ 0.474286] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.474307] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.474326] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.474336] pci 0000:00:1c.0: setting latency timer to 64
[ 0.474351] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.474363] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.474372] pci 0000:00:1c.1: setting latency timer to 64
[ 0.474391] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.474401] pci 0000:00:1c.3: setting latency timer to 64
[ 0.474414] pci 0000:00:1e.0: setting latency timer to 64
[ 0.474423] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.474430] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.474437] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.474444] pci_bus 0000:04: resource 1 mem: [0x80000000-0x801fffff]
[ 0.474451] pci_bus 0000:04: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.474458] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.474465] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.474472] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.474478] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.474485] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff]
[ 0.474492] pci_bus 0000:01: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.474499] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.474506] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.474579] NET: Registered protocol family 2
[ 0.474778] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.475424] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.476451] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.476964] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.476970] TCP reno registered
[ 0.477173] NET: Registered protocol family 1
[ 0.477217] pci 0000:00:02.0: Boot video device
[ 0.477447] Unpacking initramfs...
[ 1.100966] Freeing initrd memory: 12091k freed
[ 1.111437] audit: initializing netlink socket (disabled)
[ 1.111458] type=2000 audit(1301595883.108:1): initialized
[ 1.111822] highmem bounce pool size: 64 pages
[ 1.111834] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.115302] VFS: Disk quotas dquot_6.5.2
[ 1.115433] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.115595] msgmni has been set to 1723
[ 1.116165] alg: No test for stdrng (krng)
[ 1.116285] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.116293] io scheduler noop registered
[ 1.116298] io scheduler anticipatory registered
[ 1.116302] io scheduler deadline registered
[ 1.116393] io scheduler cfq registered (default)
[ 1.116647] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 1.116664] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.116895] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 1.116911] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.117134] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 1.117150] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.117483] isapnp: Scanning for PnP cards...
[ 1.471139] isapnp: No Plug & Play device found
[ 1.474576] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.475393] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.493394] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.493411] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.493571] mice: PS/2 mouse device common for all mice
[ 1.493621] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.493662] rtc_cmos 00:03: RTC can wake from S4
[ 1.493737] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.493780] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.493808] cpuidle: using governor ladder
[ 1.493813] cpuidle: using governor menu
[ 1.493822] No iBFT detected.
[ 1.494668] TCP cubic registered
[ 1.495006] NET: Registered protocol family 10
[ 1.496034] lo: Disabled Privacy Extensions
[ 1.496815] Mobile IPv6
[ 1.496822] NET: Registered protocol family 17
[ 1.496858] Using IPI No-Shortcut mode
[ 1.497031] registered taskstats version 1
[ 1.497691] rtc_cmos 00:03: setting system clock to 2011-03-31 18:24:44 UTC (1301595884)
[ 1.497824] Freeing unused kernel memory: 368k freed
[ 1.498120] Write protecting the kernel text: 2416k
[ 1.498174] Write protecting the kernel read-only data: 872k
[ 1.511302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.629755] udev: starting version 160
[ 1.760648] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.760673] atl1c 0000:01:00.0: setting latency timer to 64
[ 1.814570] SCSI subsystem initialized
[ 1.853216] usbcore: registered new interface driver usbfs
[ 1.853268] usbcore: registered new interface driver hub
[ 1.853355] usbcore: registered new device driver usb
[ 1.854539] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 1.865176] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.865325] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.865373] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.865384] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.865454] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.865502] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.865554] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.869438] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.869477] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.872557] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.872586] ACPI: Thermal Zone [TZ00] (36 C)
[ 1.885528] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.885581] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.885589] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.885595] usb usb1: Product: EHCI Host Controller
[ 1.885600] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
[ 1.885605] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.885789] usb usb1: configuration #1 chosen from 1 choice
[ 1.885889] hub 1-0:1.0: USB hub found
[ 1.885913] hub 1-0:1.0: 8 ports detected
[ 1.930201] libata version 3.00 loaded.
[ 1.936045] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.936158] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.936181] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.936191] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.936230] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.936283] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.936390] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.936400] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.936409] usb usb2: Product: UHCI Host Controller
[ 1.936416] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.936423] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.936639] usb usb2: configuration #1 chosen from 1 choice
[ 1.936752] hub 2-0:1.0: USB hub found
[ 1.936776] hub 2-0:1.0: 2 ports detected
[ 1.936906] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.936921] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.936928] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.936948] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.937000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.937079] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.937086] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.937092] usb usb3: Product: UHCI Host Controller
[ 1.937097] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.937103] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.937263] usb usb3: configuration #1 chosen from 1 choice
[ 1.937368] hub 3-0:1.0: USB hub found
[ 1.937390] hub 3-0:1.0: 2 ports detected
[ 1.937546] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.937560] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.937568] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.937588] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.937636] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.937716] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.937723] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.937729] usb usb4: Product: UHCI Host Controller
[ 1.937734] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.937739] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.937908] usb usb4: configuration #1 chosen from 1 choice
[ 1.938006] hub 4-0:1.0: USB hub found
[ 1.938028] hub 4-0:1.0: 2 ports detected
[ 1.938164] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.938178] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.938186] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.938205] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.938255] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.938330] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.938337] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.938343] usb usb5: Product: UHCI Host Controller
[ 1.938348] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.938354] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.938507] usb usb5: configuration #1 chosen from 1 choice
[ 1.938605] hub 5-0:1.0: USB hub found
[ 1.938627] hub 5-0:1.0: 2 ports detected
[ 1.946262] ahci 0000:00:1f.2: version 3.0
[ 1.946304] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.946391] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.946752] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 1.946762] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.946772] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.946991] scsi0 : ahci
[ 1.947388] scsi1 : ahci
[ 1.947552] scsi2 : ahci
[ 1.947722] scsi3 : ahci
[ 1.948225] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 27
[ 1.948232] ata2: DUMMY
[ 1.948236] ata3: DUMMY
[ 1.948240] ata4: DUMMY
[ 2.196031] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 2.268048] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.269378] ACPI Warning for \_SB_.PCI0.IDE1.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 2.269397] ata1.00: _GTF unexpected object type 0x1
[ 2.318855] ata1.00: ATA-8: ST9250315AS, 0003SDM1, max UDMA/133
[ 2.318864] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.321198] ata1.00: _GTF unexpected object type 0x1
[ 2.321556] ata1.00: configured for UDMA/133
[ 2.336734] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0003 PQ: 0 ANSI: 5
[ 2.352737] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.352899] sd 0:0:0:0: [sda] Write Protect is off
[ 2.352908] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.352979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.353354] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2.403677] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.251626] usb 1-6: New USB device found, idVendor=13d3, idProduct=5702
[ 3.251636] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.251643] usb 1-6: Product: USB2.0 UVC VGA WebCam
[ 3.251648] usb 1-6: Manufacturer: Azurewave
[ 3.251653] usb 1-6: SerialNumber: 200901010001
[ 3.251843] usb 1-6: configuration #1 chosen from 1 choice
[ 3.616041] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.792271] usb 5-1: New USB device found, idVendor=13d3, idProduct=3315
[ 3.792280] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.792287] usb 5-1: Product: Bluetooth module
[ 3.792292] usb 5-1: Manufacturer: Broadcom Corp
[ 3.792297] usb 5-1: SerialNumber: 74F06DC17D37
[ 3.792493] usb 5-1: configuration #1 chosen from 1 choice
[ 6.207809] device-mapper: uevent: version 1.0.3
[ 6.208180] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 6.553966] PM: Starting manual resume from disk
[ 6.723405] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 8.885627] udev: starting version 160
[ 9.635495] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 9.640669] ACPI: Lid Switch [LID]
[ 9.640909] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 9.640927] ACPI: Sleep Button [SLPB]
[ 9.641134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 9.641147] ACPI: Power Button [PWRB]
[ 9.641363] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.641376] ACPI: Power Button [PWRF]
[ 9.651748] ACPI: SSDT 7f690740 002F8 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 9.653305] ACPI: SSDT 7f690bf0 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 9.656781] Monitor-Mwait will be used to enter C-1 state
[ 9.656886] Monitor-Mwait will be used to enter C-2 state
[ 9.656966] Monitor-Mwait will be used to enter C-3 state
[ 9.657962] processor LNXCPU:00: registered as cooling_device0
[ 9.659248] ACPI: SSDT 7f690520 00217 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 9.660460] ACPI: SSDT 7f690b60 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 9.665992] processor LNXCPU:01: registered as cooling_device1
[ 9.666832] ACPI: SSDT 7f690300 00217 (v01 PmRef Cpu2Ist 00003000 INTL 20051117)
[ 9.668111] ACPI: SSDT 7f690ad0 00085 (v01 PmRef Cpu2Cst 00003000 INTL 20051117)
[ 9.670402] processor LNXCPU:02: registered as cooling_device2
[ 9.671884] ACPI: SSDT 7f6900e0 00217 (v01 PmRef Cpu3Ist 00003000 INTL 20051117)
[ 9.672782] ACPI: SSDT 7f690a40 00085 (v01 PmRef Cpu3Cst 00003000 INTL 20051117)
[ 9.675908] processor LNXCPU:03: registered as cooling_device3
[ 9.679880] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.761977] ACPI: Battery Slot [BAT0] (battery present)
[ 9.763440] ACPI: AC Adapter [AC0] (off-line)
[ 9.780842] Linux agpgart interface v0.103
[ 9.978099] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 9.978645] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 9.982150] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.061564] Bluetooth: Core ver 2.15
[ 10.061721] NET: Registered protocol family 31
[ 10.061727] Bluetooth: HCI device and connection manager initialized
[ 10.061736] Bluetooth: HCI socket layer initialized
[ 10.119157] [drm] Initialized drm 1.1.0 20060810
[ 10.130040] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.130414] usbcore: registered new interface driver btusb
[ 10.185180] Linux video capture interface: v2.00
[ 10.251058] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[ 10.269658] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input6
[ 10.269781] usbcore: registered new interface driver uvcvideo
[ 10.269789] USB Video Class driver (v0.1.0)
[ 10.477898] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.477908] pci 0000:00:02.0: setting latency timer to 64
[ 10.487099] pci 0000:00:02.0: irq 28 for MSI/MSI-X
[ 10.499133] acpi device:2b: registered as cooling_device4
[ 10.499866] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 10.500020] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.500084] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.777787] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.777884] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.924415] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 12.264018] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x020c0000
[ 12.264035] hda_codec: ALC269: BIOS auto-probing.
[ 12.264268] hda_codec: connection list not available for 0x24
[ 12.264705] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 14.393833] Adding 5060432k swap on /dev/sda6. Priority:-1 extents:1 across:5060432k
[ 15.175159] lp: driver loaded but no devices found
[ 16.994866] fuse init (API version 7.13)
[ 17.877614] NET: Registered protocol family 15
[ 17.899557] alg: No test for cipher_null (cipher_null-generic)
[ 17.899683] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 17.899806] alg: No test for digest_null (digest_null-generic)
[ 17.899941] alg: No test for compress_null (compress_null-generic)
[ 17.964975] padlock: VIA PadLock Hash Engine not detected.
[ 18.013920] padlock: VIA PadLock Hash Engine not detected.
[ 18.079035] padlock: VIA PadLock not detected.
[ 19.000138] CE: hpet increasing min_delta_ns to 15000 nsec
[ 21.013088] Bluetooth: L2CAP ver 2.14
[ 21.013095] Bluetooth: L2CAP socket layer initialized
[ 21.106182] Bluetooth: RFCOMM TTY layer initialized
[ 21.106197] Bluetooth: RFCOMM socket layer initialized
[ 21.106205] Bluetooth: RFCOMM ver 1.11
[ 21.359847] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.359860] Bluetooth: BNEP filters: protocol multicast
[ 21.407907] Bridge firewalling registered
[ 21.471738] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.471750] Bluetooth: SCO socket layer initialized
[ 21.800036] ppdev: user-space parallel port driver
[ 46.890795] CPU0 attaching NULL sched-domain.
[ 46.890810] CPU1 attaching NULL sched-domain.
[ 46.890820] CPU2 attaching NULL sched-domain.
[ 46.890827] CPU3 attaching NULL sched-domain.
[ 46.936191] CPU0 attaching sched-domain:
[ 46.936204] domain 0: span 0,2 level SIBLING
[ 46.936214] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[ 46.936235] domain 1: span 0-3 level MC
[ 46.936243] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 46.936265] CPU1 attaching sched-domain:
[ 46.936273] domain 0: span 1,3 level SIBLING
[ 46.936281] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 46.936300] domain 1: span 0-3 level MC
[ 46.936308] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 46.936329] CPU2 attaching sched-domain:
[ 46.936337] domain 0: span 0,2 level SIBLING
[ 46.936345] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 46.936363] domain 1: span 0-3 level MC
[ 46.936371] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 46.936390] CPU3 attaching sched-domain:
[ 46.936399] domain 0: span 1,3 level SIBLING
[ 46.936407] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 46.936425] domain 1: span 0-3 level MC
[ 46.936433] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 69.920179] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 70.213408] usb 1-2: New USB device found, idVendor=0b05, idProduct=472f
[ 70.213421] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 70.213432] usb 1-2: Product: ASUS Mass Storage
[ 70.213439] usb 1-2: Manufacturer: ASUS
[ 70.213446] usb 1-2: SerialNumber: 7abf5000-2268-0801-adba-cd1a08c5aebc
[ 70.213724] usb 1-2: configuration #1 chosen from 1 choice
[ 70.378883] Initializing USB Mass Storage driver...
[ 70.379231] scsi4 : SCSI emulation for USB Mass Storage devices
[ 70.379788] usbcore: registered new interface driver usb-storage
[ 70.379801] USB Mass Storage support registered.
[ 70.380251] usb-storage: device found at 4
[ 70.380264] usb-storage: waiting for device to settle before scanning
[ 75.380568] usb-storage: device scan complete
[ 75.381119] scsi scan: INQUIRY result too short (5), using 36
[ 75.381136] scsi 4:0:0:0: Direct-Access PQ: 0 ANSI: 0
[ 75.384266] sd 4:0:0:0: [sdb] 7905280 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 75.384727] sd 4:0:0:0: [sdb] Write Protect is off
[ 75.384739] sd 4:0:0:0: [sdb] Mode Sense: 00 06 00 00
[ 75.384747] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 75.386722] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 75.386736] sdb: sdb1 < sdb5 >
[ 75.396269] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 75.396286] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 76.499114] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 78.017586] pan0: no IPv6 routers present
[ 85.097229] usb 1-2: USB disconnect, address 4
[ 86.392096] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 86.526574] usb 1-2: New USB device found, idVendor=0b05, idProduct=0303
[ 86.526588] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 86.526598] usb 1-2: Product: ASUS ActiveSync
[ 86.526605] usb 1-2: Manufacturer: ASUS
[ 86.526613] usb 1-2: SerialNumber: 7abf5000-2268-0801-adba-cd1a08c5aebc
[ 86.526889] usb 1-2: configuration #1 chosen from 1 choice
[ 86.643422] usbcore: registered new interface driver cdc_ether
[ 86.698572] rndis_host 1-2:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47
[ 86.702754] eth1: register 'rndis_host' at usb-0000:00:1d.7-2, RNDIS device, 80:00:60:0f:e8:00
[ 86.702860] usbcore: registered new interface driver rndis_host
[ 171.015433] CPU0 attaching NULL sched-domain.
[ 171.015447] CPU1 attaching NULL sched-domain.
[ 171.015454] CPU2 attaching NULL sched-domain.
[ 171.015462] CPU3 attaching NULL sched-domain.
[ 171.048693] CPU0 attaching sched-domain:
[ 171.048702] domain 0: span 0,2 level SIBLING
[ 171.048709] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[ 171.048722] domain 1: span 0,2 level MC
[ 171.048728] groups: 0,2 (cpu_power = 1178)
[ 171.048738] domain 2: span 0-3 level CPU
[ 171.048743] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 171.048759] CPU1 attaching sched-domain:
[ 171.048764] domain 0: span 1,3 level SIBLING
[ 171.048769] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 171.048782] domain 1: span 1,3 level MC
[ 171.048787] groups: 1,3 (cpu_power = 1178)
[ 171.048796] domain 2: span 0-3 level CPU
[ 171.048801] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 171.048815] CPU2 attaching sched-domain:
[ 171.048820] domain 0: span 0,2 level SIBLING
[ 171.048825] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 171.048837] domain 1: span 0,2 level MC
[ 171.048843] groups: 0,2 (cpu_power = 1178)
[ 171.048852] domain 2: span 0-3 level CPU
[ 171.048857] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 171.048870] CPU3 attaching sched-domain:
[ 171.048876] domain 0: span 1,3 level SIBLING
[ 171.048881] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 171.048893] domain 1: span 1,3 level MC
[ 171.048898] groups: 1,3 (cpu_power = 1178)
[ 171.048908] domain 2: span 0-3 level CPU
[ 171.048913] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 206.380580] CE: hpet increasing min_delta_ns to 22500 nsec
kapust@kapust-laptop:~$
[quote=koldunboroda]
раньше выходил в интернт подсоеденяя кпк к Usb, включая общий интернет, он мне автоматом создавал нвоое подключение eth и все работало,
сейчас он не создает новое подключение eth
и естественно интернет с мобильного не получает
(хочуна всякий что отметить кпк с windows mobile и интерет используются через локальную сеть, а не как через модем)
1 Открываем консоль
2 команда dmesg запоминаем последнюю строку
3 подключаем КПК
4 команда dmesg смотрим, что появилось и в студию[/quote]
в прошлом сообщении был не прав поспешил,
жирным веделю то что добавилось после подключения телефона (с 108 позиции)
Upd: Жирным не выделелось (видно нельзя делать вложенные теги)
но я там обрамил - внутри них то что появилось
text
[ 0.357503] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 0.358098] devtmpfs: initialized
[ 0.358930] regulator: core version 0.5
[ 0.359053] NET: Registered protocol family 16
[ 0.359234] ACPI: bus type pci registered
[ 0.359367] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.359374] PCI: Not using MMCONFIG.
[ 0.359632] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.359637] PCI: Using configuration type 1 for base access
[ 0.360802] bio: create slab <bio-0> at 0
[ 0.362650] ACPI: EC: EC description table is found, configuring boot EC
[ 0.364440] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.376864] ACPI: Interpreter enabled
[ 0.376881] ACPI: (supports S0 S3 S4 S5)
[ 0.376931] ACPI: Using IOAPIC for interrupt routing
[ 0.377041] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.379455] ACPI: BIOS _OSI(Linux) query ignored
[ 0.381684] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.381690] PCI: Using MMCONFIG for extended config space
[ 0.394147] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.395485] ACPI: No dock devices found.
[ 0.395743] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.395877] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e00000-0xf7e7ffff]
[ 0.395887] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
[ 0.395897] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.395906] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7d00000-0xf7dfffff]
[ 0.395953] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e80000-0xf7efffff]
[ 0.396102] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7cf8000-0xf7cfbfff]
[ 0.396175] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.396184] pci 0000:00:1b.0: PME# disabled
[ 0.396299] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.396308] pci 0000:00:1c.0: PME# disabled
[ 0.396421] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.396430] pci 0000:00:1c.1: PME# disabled
[ 0.396544] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.396553] pci 0000:00:1c.3: PME# disabled
[ 0.396632] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
[ 0.396711] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
[ 0.396789] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.396868] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
[ 0.396951] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7cf7c00-0xf7cf7fff]
[ 0.397023] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.397032] pci 0000:00:1d.7: PME# disabled
[ 0.397301] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
[ 0.397314] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
[ 0.397326] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
[ 0.397339] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
[ 0.397352] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc81f]
[ 0.397365] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7cf7800-0xf7cf7bff]
[ 0.397416] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.397425] pci 0000:00:1f.2: PME# disabled
[ 0.397648] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbffc000-0xfbffffff]
[ 0.397757] pci 0000:02:00.0: supports D1 D2
[ 0.397763] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.397772] pci 0000:02:00.0: PME# disabled
[ 0.397872] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.397886] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
[ 0.397973] pci 0000:01:00.0: reg 10 64bit mmio: [0xf7fc0000-0xf7ffffff]
[ 0.397989] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.398083] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.398093] pci 0000:01:00.0: PME# disabled
[ 0.398180] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff]
[ 0.398189] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
[ 0.398262] pci 0000:00:1e.0: transparent bridge
[ 0.398308] pci_bus 0000:00: on NUMA node 0
[ 0.398320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.398635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.398766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.398875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.421230] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.421487] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.421739] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.421989] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.422241] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.422496] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.422748] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.422999] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.423224] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.423246] vgaarb: loaded
[ 0.423396] PCI: Using ACPI for IRQ routing
[ 0.423810] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.423822] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.428024] Switching to clocksource hpet
[ 0.430441] pnp: PnP ACPI init
[ 0.430480] ACPI: bus type pnp registered
[ 0.434772] pnp: PnP ACPI: found 13 devices
[ 0.434778] ACPI: ACPI bus type pnp unregistered
[ 0.434786] PnPBIOS: Disabled by ACPI PNP
[ 0.434811] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.434819] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.434840] system 00:08: ioport range 0x25c-0x25f has been reserved
[ 0.434848] system 00:08: ioport range 0x380-0x383 has been reserved
[ 0.434855] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.434863] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.434871] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.434878] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.434887] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.434895] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.434903] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.434911] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.434919] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.434934] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.434942] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.434955] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.434969] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.434977] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.434985] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.434993] system 00:0c: iomem range 0x100000-0x7f6fffff could not be reserved
[ 0.435001] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.470166] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.470175] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.470186] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.470196] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.470209] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.470217] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.470227] pci 0000:00:1c.1: MEM window: 0xf8000000-0xfbffffff
[ 0.470236] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
[ 0.470249] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
[ 0.470257] pci 0000:00:1c.3: IO window: 0xe000-0xefff
[ 0.470267] pci 0000:00:1c.3: MEM window: 0xf7f00000-0xf7ffffff
[ 0.470276] pci 0000:00:1c.3: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.470289] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.470294] pci 0000:00:1e.0: IO window: disabled
[ 0.470303] pci 0000:00:1e.0: MEM window: disabled
[ 0.470311] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.470332] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.470351] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.470361] pci 0000:00:1c.0: setting latency timer to 64
[ 0.470377] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.470388] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.470398] pci 0000:00:1c.1: setting latency timer to 64
[ 0.470417] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.470426] pci 0000:00:1c.3: setting latency timer to 64
[ 0.470439] pci 0000:00:1e.0: setting latency timer to 64
[ 0.470449] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.470455] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.470462] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.470469] pci_bus 0000:04: resource 1 mem: [0x80000000-0x801fffff]
[ 0.470476] pci_bus 0000:04: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.470483] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.470490] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.470497] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf6ffffff]
[ 0.470504] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.470510] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff]
[ 0.470517] pci_bus 0000:01: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.470524] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.470531] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.470603] NET: Registered protocol family 2
[ 0.470802] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.471449] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.472480] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.472996] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.473003] TCP reno registered
[ 0.473206] NET: Registered protocol family 1
[ 0.473249] pci 0000:00:02.0: Boot video device
[ 0.473480] Unpacking initramfs...
[ 1.096293] Freeing initrd memory: 12091k freed
[ 1.106804] audit: initializing netlink socket (disabled)
[ 1.106828] type=2000 audit(1301596534.104:1): initialized
[ 1.107186] highmem bounce pool size: 64 pages
[ 1.107197] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.110783] VFS: Disk quotas dquot_6.5.2
[ 1.110915] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.111080] msgmni has been set to 1723
[ 1.111612] alg: No test for stdrng (krng)
[ 1.111733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.111741] io scheduler noop registered
[ 1.111745] io scheduler anticipatory registered
[ 1.111750] io scheduler deadline registered
[ 1.111843] io scheduler cfq registered (default)
[ 1.112075] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 1.112092] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.112325] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 1.112341] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.112587] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 1.112603] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.112935] isapnp: Scanning for PnP cards...
[ 1.466856] isapnp: No Plug & Play device found
[ 1.470286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.471102] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.488473] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.488490] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.488654] mice: PS/2 mouse device common for all mice
[ 1.488702] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.488741] rtc_cmos 00:03: RTC can wake from S4
[ 1.488816] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.488857] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.488884] cpuidle: using governor ladder
[ 1.488889] cpuidle: using governor menu
[ 1.488898] No iBFT detected.
[ 1.489746] TCP cubic registered
[ 1.490084] NET: Registered protocol family 10
[ 1.491118] lo: Disabled Privacy Extensions
[ 1.491866] Mobile IPv6
[ 1.491873] NET: Registered protocol family 17
[ 1.491904] Using IPI No-Shortcut mode
[ 1.492083] registered taskstats version 1
[ 1.492760] rtc_cmos 00:03: setting system clock to 2011-03-31 18:35:35 UTC (1301596535)
[ 1.492886] Freeing unused kernel memory: 368k freed
[ 1.493188] Write protecting the kernel text: 2416k
[ 1.493254] Write protecting the kernel read-only data: 872k
[ 1.506936] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.624946] udev: starting version 160
[ 1.807571] usbcore: registered new interface driver usbfs
[ 1.807620] usbcore: registered new interface driver hub
[ 1.815010] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.815037] atl1c 0000:01:00.0: setting latency timer to 64
[ 1.820772] usbcore: registered new device driver usb
[ 1.858735] SCSI subsystem initialized
[ 1.861631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.861715] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.861762] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.861773] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.861856] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.861901] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.861925] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.865835] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.869581] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.876625] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.876646] ACPI: Thermal Zone [TZ00] (60 C)
[ 1.885536] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.885605] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.885615] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.885624] usb usb1: Product: EHCI Host Controller
[ 1.885632] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
[ 1.885640] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.885891] usb usb1: configuration #1 chosen from 1 choice
[ 1.885996] hub 1-0:1.0: USB hub found
[ 1.886020] hub 1-0:1.0: 8 ports detected
[ 1.898675] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 1.922413] libata version 3.00 loaded.
[ 1.926930] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.927044] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.927065] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.927076] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.927114] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.927176] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.927281] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.927291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.927299] usb usb2: Product: UHCI Host Controller
[ 1.927305] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.927312] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.927558] usb usb2: configuration #1 chosen from 1 choice
[ 1.927666] hub 2-0:1.0: USB hub found
[ 1.927689] hub 2-0:1.0: 2 ports detected
[ 1.927834] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.927854] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.927864] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.927890] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.927955] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.928057] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.928068] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.928077] usb usb3: Product: UHCI Host Controller
[ 1.928084] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.928092] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.928308] usb usb3: configuration #1 chosen from 1 choice
[ 1.928411] hub 3-0:1.0: USB hub found
[ 1.928441] hub 3-0:1.0: 2 ports detected
[ 1.928639] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.928658] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.928668] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.928695] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.928755] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.928855] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.928865] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.928873] usb usb4: Product: UHCI Host Controller
[ 1.928881] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.928889] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.929101] usb usb4: configuration #1 chosen from 1 choice
[ 1.929209] hub 4-0:1.0: USB hub found
[ 1.929230] hub 4-0:1.0: 2 ports detected
[ 1.929369] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.929391] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.929401] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.929427] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.929490] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.929587] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.929598] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.929606] usb usb5: Product: UHCI Host Controller
[ 1.929614] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 1.929622] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.929850] usb usb5: configuration #1 chosen from 1 choice
[ 1.929948] hub 5-0:1.0: USB hub found
[ 1.929969] hub 5-0:1.0: 2 ports detected
[ 1.941019] ahci 0000:00:1f.2: version 3.0
[ 1.941063] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.941157] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.941288] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 1.941303] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.941316] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.941953] scsi0 : ahci
[ 1.942244] scsi1 : ahci
[ 1.942447] scsi2 : ahci
[ 1.942671] scsi3 : ahci
[ 1.943180] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
[ 1.943187] ata2: DUMMY
[ 1.943191] ata3: DUMMY
[ 1.943195] ata4: DUMMY
[ 2.196034] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 2.664042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.665372] ACPI Warning for \_SB_.PCI0.IDE1.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 2.665391] ata1.00: _GTF unexpected object type 0x1
[ 2.717922] ata1.00: ATA-8: ST9250315AS, 0003SDM1, max UDMA/133
[ 2.717930] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.720267] ata1.00: _GTF unexpected object type 0x1
[ 2.720630] ata1.00: configured for UDMA/133
[ 2.736229] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0003 PQ: 0 ANSI: 5
[ 2.752322] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.752464] sd 0:0:0:0: [sda] Write Protect is off
[ 2.752475] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.752576] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.752971] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2.803091] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.245998] usb 1-6: New USB device found, idVendor=13d3, idProduct=5702
[ 3.246007] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.246014] usb 1-6: Product: USB2.0 UVC VGA WebCam
[ 3.246019] usb 1-6: Manufacturer: Azurewave
[ 3.246024] usb 1-6: SerialNumber: 200901010001
[ 3.246207] usb 1-6: configuration #1 chosen from 1 choice
[ 3.616034] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.791515] usb 5-1: New USB device found, idVendor=13d3, idProduct=3315
[ 3.791524] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.791531] usb 5-1: Product: Bluetooth module
[ 3.791536] usb 5-1: Manufacturer: Broadcom Corp
[ 3.791541] usb 5-1: SerialNumber: 74F06DC17D37
[ 3.791731] usb 5-1: configuration #1 chosen from 1 choice
[ 6.556280] device-mapper: uevent: version 1.0.3
[ 6.557456] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 6.894258] PM: Starting manual resume from disk
[ 7.067891] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 9.208015] udev: starting version 160
[ 9.853945] ACPI: SSDT 7f690740 002F8 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 9.855489] ACPI: SSDT 7f690bf0 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 9.857867] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 9.860604] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 9.885668] Monitor-Mwait will be used to enter C-1 state
[ 9.888903] ACPI: Lid Switch [LID]
[ 9.889162] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 9.889306] ACPI: Sleep Button [SLPB]
[ 9.889523] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 9.889637] ACPI: Power Button [PWRB]
[ 9.900078] Monitor-Mwait will be used to enter C-2 state
[ 9.902436] Monitor-Mwait will be used to enter C-3 state
[ 9.902768] processor LNXCPU:00: registered as cooling_device0
[ 9.903026] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.903158] ACPI: Power Button [PWRF]
[ 9.905997] ACPI: SSDT 7f690520 00217 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 9.907122] ACPI: SSDT 7f690b60 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 9.927053] Linux agpgart interface v0.103
[ 9.931638] processor LNXCPU:01: registered as cooling_device1
[ 9.933599] ACPI: SSDT 7f690300 00217 (v01 PmRef Cpu2Ist 00003000 INTL 20051117)
[ 9.934289] ACPI: AC Adapter [AC0] (off-line)
[ 9.934878] ACPI: SSDT 7f690ad0 00085 (v01 PmRef Cpu2Cst 00003000 INTL 20051117)
[ 9.949430] processor LNXCPU:02: registered as cooling_device2
[ 9.950782] ACPI: SSDT 7f6900e0 00217 (v01 PmRef Cpu3Ist 00003000 INTL 20051117)
[ 9.952528] ACPI: SSDT 7f690a40 00085 (v01 PmRef Cpu3Cst 00003000 INTL 20051117)
[ 9.965500] processor LNXCPU:03: registered as cooling_device3
[ 10.039375] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 10.039929] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 10.045748] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.062705] ACPI: Battery Slot [BAT0] (battery present)
[ 10.296220] Bluetooth: Core ver 2.15
[ 10.296388] NET: Registered protocol family 31
[ 10.296394] Bluetooth: HCI device and connection manager initialized
[ 10.296404] Bluetooth: HCI socket layer initialized
[ 10.336390] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.336805] usbcore: registered new interface driver btusb
[ 10.605533] Linux video capture interface: v2.00
[ 10.638682] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[ 10.657315] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input6
[ 10.657519] usbcore: registered new interface driver uvcvideo
[ 10.658030] USB Video Class driver (v0.1.0)
[ 10.696251] [drm] Initialized drm 1.1.0 20060810
[ 10.967660] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.967675] pci 0000:00:02.0: setting latency timer to 64
[ 10.981738] pci 0000:00:02.0: irq 28 for MSI/MSI-X
[ 10.982598] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.982667] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.993598] acpi device:2b: registered as cooling_device4
[ 10.994043] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 10.994192] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.994253] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.136181] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 11.540831] hda_codec: ALC269: BIOS auto-probing.
[ 11.541090] hda_codec: connection list not available for 0x24
[ 11.541603] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 14.716191] Adding 5060432k swap on /dev/sda6. Priority:-1 extents:1 across:5060432k
[ 34.255788] lp: driver loaded but no devices found
[ 35.546841] fuse init (API version 7.13)
[ 36.110321] NET: Registered protocol family 15
[ 36.121286] alg: No test for cipher_null (cipher_null-generic)
[ 36.121386] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 36.121455] alg: No test for digest_null (digest_null-generic)
[ 36.121513] alg: No test for compress_null (compress_null-generic)
[ 36.163131] padlock: VIA PadLock Hash Engine not detected.
[ 36.191724] padlock: VIA PadLock Hash Engine not detected.
[ 36.255923] padlock: VIA PadLock not detected.
[ 38.522690] Bluetooth: L2CAP ver 2.14
[ 38.522703] Bluetooth: L2CAP socket layer initialized
[ 38.544983] Bluetooth: RFCOMM TTY layer initialized
[ 38.545046] Bluetooth: RFCOMM socket layer initialized
[ 38.545055] Bluetooth: RFCOMM ver 1.11
[ 38.609302] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.609312] Bluetooth: BNEP filters: protocol multicast
[ 38.646397] Bridge firewalling registered
[ 38.753607] Bluetooth: SCO (Voice Link) ver 0.6
[ 38.753615] Bluetooth: SCO socket layer initialized
[ 39.582604] ppdev: user-space parallel port driver
[ 41.816136] CE: hpet increasing min_delta_ns to 15000 nsec
[ 64.895007] CPU0 attaching NULL sched-domain.
[ 64.895022] CPU1 attaching NULL sched-domain.
[ 64.895031] CPU2 attaching NULL sched-domain.
[ 64.895039] CPU3 attaching NULL sched-domain.
[ 64.948165] CPU0 attaching sched-domain:
[ 64.948178] domain 0: span 0,2 level SIBLING
[ 64.948188] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[ 64.948209] domain 1: span 0-3 level MC
[ 64.948217] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 64.948239] CPU1 attaching sched-domain:
[ 64.948247] domain 0: span 1,3 level SIBLING
[ 64.948255] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 64.948273] domain 1: span 0-3 level MC
[ 64.948281] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 64.948301] CPU2 attaching sched-domain:
[ 64.948309] domain 0: span 0,2 level SIBLING
[ 64.948317] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 64.948335] domain 1: span 0-3 level MC
[ 64.948343] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 64.948363] CPU3 attaching sched-domain:
[ 64.948371] domain 0: span 1,3 level SIBLING
[ 64.948379] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 64.948397] domain 1: span 0-3 level MC
[ 64.948405] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 90.364111] pan0: no IPv6 routers present
[b]
[ 108.584145] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 108.861531] usb 1-2: New USB device found, idVendor=0b05, idProduct=472f
[ 108.861543] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 108.861552] usb 1-2: Product: ASUS Mass Storage
[ 108.861560] usb 1-2: Manufacturer: ASUS
[ 108.861567] usb 1-2: SerialNumber: 7abf5000-2268-0801-adba-cd1a08c5aebc
[ 108.861850] usb 1-2: configuration #1 chosen from 1 choice
[ 108.993049] Initializing USB Mass Storage driver...
[ 108.993514] scsi4 : SCSI emulation for USB Mass Storage devices
[ 108.993851] usbcore: registered new interface driver usb-storage
[ 108.993863] USB Mass Storage support registered.
[ 108.994105] usb-storage: device found at 4
[ 108.994113] usb-storage: waiting for device to settle before scanning
[ 113.992546] usb-storage: device scan complete
[ 113.993125] scsi scan: INQUIRY result too short (5), using 36
[ 113.993141] scsi 4:0:0:0: Direct-Access PQ: 0 ANSI: 0
[ 113.997990] sd 4:0:0:0: [sdb] 7905280 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 113.998473] sd 4:0:0:0: [sdb] Write Protect is off
[ 113.998486] sd 4:0:0:0: [sdb] Mode Sense: 00 06 00 00
[ 113.998494] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 114.000480] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 114.000494] sdb: sdb1 < sdb5 >
[ 114.005015] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 114.005036] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 114.869382] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[/b]
[ 114.000494] sdb: sdb1 < sdb5 >
[ 114.005015] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 114.005036] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 114.869382] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
поздравляю. У вас появился новый внешний диск sdb
на нём два раздела
sdb1
sdb5
пользуйтесь!
Не рекомендуется монтировать их в кодировке UTF, ибо в ней большие и малые РаЗлИчАюТсЯ.
[quote=koldunboroda][ 114.000494] sdb: sdb1 < sdb5 >
[ 114.005015] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 114.005036] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 114.869382] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
поздравляю. У вас появился новый внешний диск sdb
на нём два раздела
sdb1
sdb5
пользуйтесь!
Не рекомендуется монтировать их в кодировке UTF, ибо в ней большие и малые РаЗлИчАюТсЯ.[/quote]
Оно бы все конечно здорово,
но то что он их определяет как диски я итак заметил,
я бы лучше попользовался подключением к сети через свой PDA, раньше же оно работало.
koldunboroda, а в кпк нет такого, что при подключении он спрашивает как подключить: как диск или как модем
я бы лучше попользовался подключением к сети через свой PDA, раньше же оно работало.
а в настройках самого PDA ничего такого нет? моя мобила помнится спрашивала - работать как диск, или как модем?
koldunboroda, а в кпк нет такого, что при подключении он спрашивает как подключить: как диск или как модем
[quote=koldunboroda]я бы лучше попользовался подключением к сети через свой PDA, раньше же оно работало.
а в настройках самого PDA ничего такого нет? моя мобила помнится спрашивала - работать как диск, или как модем?[/quote]
Есть, я же говрю что до обновления системы все работало,
выбирал подк к интернет и ежик брал интрнет с кпк.
после обновлния системы, он теперь как ни тыкай что не выбирай, почему-то подключает его только как жесткий диск внешний.
ну не обязательно. у меня например работает следующий способ
набираем в консоли
Консоль:
dmesg
Но не вводим. (энтэр нажимать не нужно)
после этого подключаем что либо.
в консоли вылезет именно то, что породило новое устройство.
Вы серьезно, это должно работать??
ну или перенаправил зачем-то буфер ядра во все консоли...
Тогда не нужно было б и dmesg набирать.
Я даж будучи уверен, что это не может работать, таки-подсел на измену и проверил. Результатом не удивлен. Никаких кернел-логов в консоль не посыпалось.
Если у кого-то это и работает - то это баг, а не фича.
Бобр. на рескуе прокатывало.
Тогда не нужно было б и dmesg набирать.
дык и не надо.
но можно и набрать.
сантехник, наберите no way, и вставьте флешку :P
на рескуе прокатывало.
Ну, на rescue-CD есть определенный смысл писать кернел-логи во все терминалы подряд. На то он и rescue, чтоб всегда видеть, что там в системе происходит. А на обычном рабочем дистре каждый раз видеть в консоли лог ядра - моветон.
сантехник, наберите no way, и вставьте флешку tongue
Действительно, попробуйте. А лучше просто откройте консоль и вставьте флэшку.
К слову, неплохой способ мониторить логи - syslog-ng. Пишет логи (и лог ядра в т. ч.) в vt12. Можно нажать Ctrl+Alt+F12 и любоваться сообщениями о том, как система находит флэшку.
К слову, неплохой способ мониторить логи - syslog-ng.
не нужно.
[console]# tail -f /var/log/syslog[/console]
пишет лог в любую консоль по вашему выбору :P
[quote=Klim]koldunboroda, а в кпк нет такого, что при подключении он спрашивает как подключить: как диск или как модем
[quote=koldunboroda]я бы лучше попользовался подключением к сети через свой PDA, раньше же оно работало.
а в настройках самого PDA ничего такого нет? моя мобила помнится спрашивала - работать как диск, или как модем?[/quote]
Есть, я же говрю что до обновления системы все работало,
выбирал подк к интернет и ежик брал интрнет с кпк.
после обновлния системы, он теперь как ни тыкай что не выбирай, почему-то подключает его только как жесткий диск внешний.[/quote]
в догонку моим сообщением,
установил опытным путем что при подсоедении кпк к usb включении на КПК общего интернетатаки создается
подключение по локальной сети eth1
если написать ifconfig eth1 up
то он даже вроде начинает отправлять и принимать пакеты,
но в интернет не выходит,
может всетаки ктонибудь что-нибудь посоветует?
Наверное немного офтоп, но может кто-то поможет, не могу найти нигде решение проблемы
после обновления системы (у меня eb4 aurora, но думаю что любое решение для debian подойдет)
перестал рабоать мобильны интернет.
раньше выходил в интернт подсоеденяя кпк к Usb, включая общий интернет, он мне автоматом создавал нвоое подключение eth и все работало,
сейчас он не создает новое подключение eth
и естественно интернет с мобильного не получает
(хочуна всякий что отметить кпк с windows mobile и интерет используются через локальную сеть, а не как через модем)
не могу найти решение уже все пакеты о включал,
поиде должно все работать по умолчанию. но нет
не знаю причин покоторым это теперь не работает автоматом.
но как выяснилось все просто.
естественно как обычно подключал КПК, включал общий интернет затем
что делал лилно я
запускаю ifconfig,
вижу соедененени pan1 отключаю его
ifconfig pan1 down
затем sudo dhclient eth1 (у меня это соеденение носит имя eth1)
ну и потом просто
ifconfig eth1 up
все однако заработало
п.с возможно еще были проблемы из-за того что не стоял dhcp
(у меня установился dnsmasq в процессе решения другой проблемы)
может быть это все и взаимосвязано как-то.
надеюсь кому-то пригодится
в том случае если у них не будет работать общий интернет кпк(pda windows mobile) - Linux
P.p.s заметил что решение уже не первой проблемы пытаюсь выпросить у знатоков linux, и в очередной раз приходится до всего доходить методом научного тыка, видно это такой "путь избранных".
ну и на псоледок
bobr, спасибо что прояснил детально.
а я то думаю, почему терминал сообщения шлет. всякие.
с dmesgом совпадение вышло :D
Войдите или зарегистрируйтесь, чтобы ответить.
