intel hm55 express | 330um кулер живет своей жизнью

limorte@limorte-Satellite-T210:/$ dmesg | grep intel
[    1.575853] intel_idle: MWAIT substates: 0x1120
[    1.575856] intel_idle: v0.4 model 0x25
[    1.575858] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.590923] ACPI: acpi_idle yielding to intel_idle
[    1.852881] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.853003] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.854019] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    1.854239] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    3.143557] fbcon: inteldrmfb (fb0) is primary device
[    3.765976] fb0: inteldrmfb frame buffer device
[   12.720209] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[   12.784474] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   12.850065] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[  321.310286] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 5883.130260] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 19255, limit 18000
[ 5898.130055] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18593, limit 18000
[ 5953.130058] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18060, limit 18000
[ 5958.130059] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18119, limit 18000
[ 5963.130069] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18426, limit 18000
[ 6033.130058] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18563, limit 18000
[ 6193.130072] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18113, limit 18000
[ 6198.130112] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 30127, limit 18000
[ 6353.130080] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 19431, limit 18000
[ 6633.140065] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 19250, limit 18000
[ 6748.140082] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 19795, limit 18000
[ 6983.140063] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18351, limit 18000
[ 6998.140069] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18352, limit 18000
[ 7648.150101] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 20122, limit 18000
[ 7833.150094] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18619, limit 18000
[ 7988.150085] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18001, limit 18000
[ 7993.150060] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18308, limit 18000
[ 7998.150095] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 20761, limit 18000
[ 8013.150076] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 28350, limit 18000
[ 8033.150060] intel ips 0000:00:1f.6: MCP limit exceeded: Avg power 18289, limit 18000

[    9.060103] coretemp coretemp.0: TjMax is 105 C.
[    9.125590] coretemp coretemp.2: TjMax is 105 C.
[   12.120038] via_cputemp: Not a VIA CPU
[   12.850065] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 1200.680590] [15:12]  0  frame attempts
[ 1200.680592]  [11:8]  0  rts attempts

[    3.771904] acpi device:0e: registered as cooling_device4
limorte@limorte-Satellite-T210:/$ dmesg | grep therm
limorte@limorte-Satellite-T210:/$ dmesg | grep Therm
[    0.002221] CPU0: Thermal monitoring handled by SMI
[    3.117461] CPU1: Thermal monitoring handled by SMI
[    0.020000] CPU2: Thermal monitoring handled by SMI
[    0.020000] CPU3: Thermal monitoring handled by SMI

00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
        Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
        Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05)
        Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05)
        Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: i801_smbus
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: intel ips
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: r8169
06:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
        Subsystem: Askey Computer Corp. Device [144f:7175]
        Kernel driver in use: brcmsmac
        Kernel modules: wl, brcmsmac
10:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] (rev 20)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: sdhci-pci
        Kernel modules: sdhci-pci
10:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] (rev 20)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel modules: sdhci-pci
10:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] (rev 20)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
        Kernel driver in use: jmb38x_ms
        Kernel modules: jmb38x_ms
10:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2384] (rev 20)
        Subsystem: Toshiba America Info Systems Device [1179:fdb0]
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05)
        Subsystem: Intel Corporation Device [8086:8086]
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05)
        Subsystem: Intel Corporation Device [8086:8086]
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05)
        Subsystem: Intel Corporation Device [8086:8086]
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05)
        Subsystem: Intel Corporation Device [8086:8086]
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05)
        Subsystem: Intel Corporation Device [8086:8086]
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05)
        Subsystem: Intel Corporation Device [8086:8086]

  Kernel version : 2.6.39.2-2fuck2   -    ACPI version : 20110316
  -----------------------------------------------------------
  Battery #1     : present
    Remaining capacity : 5348 mAh, 100.0%, 00:00:00
    Design capacity    : 5600 mAh
    Last full capacity : 5348 mAh, 95.50% of design capacity
    Capacity loss      : 4.500%
    Present rate       : 65535 mA
    Charging state     : charged
    Battery type       : rechargeable 
    Model number       : 3780 mAh
    Serial number      : PA3821U-1BRS
  AC adapter     : on-line 
  Fan            : <not available>
  CPU type               : Intel(R) Core(TM) i3 CPU       U 330  @ 1.20GHz 
  Min/Max frequency      : 1199/1199 MHz
  Current frequency      : 1199 MHz
  Frequency governor     : ondemand 
  Freq. scaling driver   : acpi-cpufreq 
  Cache size             : 3072 KB
  Bogomips               : 2400.17 
  Bogomips               : 2400.07 
  Bogomips               : 2400.07 
  Bogomips               : 2400.07 
  Function Show_CPU_Info : could not read directory /proc/acpi/processor/
  Make sure your kernel has ACPI processor support enabled.
  Thermal info   : <not available>
   Device       S-state   Status   Sysfs node
  ---------------------------------------
  1. EHC1         S3    *disabled  pci:0000:00:1d.0
  2. USB1         S3    *disabled  
  3. USB2         S3    *disabled  
  4. USB4         S3    *disabled  
  5. EHC2         S3    *disabled  pci:0000:00:1a.0
  6. USB5         S3    *disabled  
  7. USB6         S3    *disabled  
  8. USB7         S3    *disabled  
  9. HDEF         S3    *disabled  pci:0000:00:1b.0
  10. PXSX        S5    *enabled   pci:0000:01:00.0
  11. PXSX        S0    *disabled  pci:0000:06:00.0
  12. RP03        S3    *disabled  
  13. PXSX        S3    *disabled  
  14. PXSX        S4    *disabled  
  15. PXSX        S4    *disabled  pci:0000:10:00.0
  16. PXSX        S4    *disabled  
  17. PXSX        S4    *disabled  
  18. LID0        S4    *enabled   

# sensors-detect revision 5861 (2010-09-21 17:21:05 +0200)
# System: TOSHIBA Satellite T210 (laptop)
# Board: TOSHIBA NDU00
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH)
Module i2c-i801 loaded successfully.
Module i2c-dev loaded successfully.
Next adapter: i915 gmbus disabled (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Next adapter: i915 gmbus ssc (i2c-1)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x0b
Probing for `Smart Battery'...                              Success!
    (confidence 5, driver `sbs')
Next adapter: i915 gmbus vga (i2c-2)
Do you want to scan it? (YES/no/selectively): y
Next adapter: i915 gmbus panel (i2c-3)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                Yes
    (confidence 8, not a hardware monitoring chip)
Client found at address 0x51
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x53
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Next adapter: i915 gmbus dpc (i2c-4)
Do you want to scan it? (YES/no/selectively): y
Next adapter: i915 gmbus dpb (i2c-5)
Do you want to scan it? (YES/no/selectively): y
Next adapter: i915 gmbus reserved (i2c-6)
Do you want to scan it? (YES/no/selectively): y
Next adapter: i915 gmbus dpd (i2c-7)
Do you want to scan it? (YES/no/selectively): y
Next adapter: DPDDC-C (i2c-8)
Do you want to scan it? (YES/no/selectively): y
Next adapter: SMBus I801 adapter at efa0 (i2c-9)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Now follows a summary of the probes I have just done.
Just press ENTER to continue: 
Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)
Driver `sbs':
  * Bus `i915 gmbus ssc'
    Busdriver `drm', I2C address 0x0b
    Chip `Smart Battery' (confidence: 5)
Warning: the required module coretemp is not currently installed
on your system. If it is built into the kernel then it's OK.
Otherwise, check [url]http://www.lm-sensors.org/wiki/Devices[/url] for
driver availability.
Warning: the required module sbs is not currently installed
on your system. If it is built into the kernel then it's OK.
Otherwise, check [url]http://www.lm-sensors.org/wiki/Devices[/url] for
driver availability.
No modules to load, skipping modules configuration.
Unloading i2c-dev... OK
Unloading i2c-i801... failed - это наэрн потомучто вкомпилин в ядро

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +73.0°C  (high = +95.0°C, crit = +105.0°C)  
coretemp-isa-0002
Adapter: ISA adapter
Core 2:      +71.0°C  (high = +95.0°C, crit = +105.0°C)