GPRS/3G ZTE MF192 или как я настроил модем? (это вопрос)

24.05.2011 16:14 #164626

как я его поднимал:

Показать

[console]alexander@goblin-book ~ $ sudo /etc/init.d/net.wlan0 stop
net.wlan0 | * WARNING: net.wlan0 is already stopped
alexander@goblin-book ~ $ sudo /etc/init.d/net.eth0 stop
net.eth0 | * Bringing down interface eth0
net.eth0 | * Stopping ifplugd on eth0 ... [ ok ]
net.eth0 | * Removing addresses
alexander@goblin-book ~ $ eject /dev/sr0
alexander@goblin-book ~ $ lsmod
.... нужные модули сами не подгрузились
alexander@goblin-book ~ $ ls /dev/ttyACM*
ls: невозможно получить доступ к /dev/ttyACM*: Нет такого файла или каталога
# нужных устройств тоже нет...
alexander@goblin-book ~ $ sudo modprobe option
alexander@goblin-book ~ $ eject /dev/sr0
alexander@goblin-book ~ $ lsmod
Module Size Used by
option 13229 0
usb_wwan 8351 1 option
usbserial 25145 2 option,usb_wwan
cdc_acm 12280 0
...
alexander@goblin-book ~ $ ls /dev/ttyACM*
/dev/ttyACM0 /dev/ttyACM1 /dev/ttyACM2 /dev/ttyACM3
alexander@goblin-book ~ $ sudo /etc/init.d/net.ppp0 start
net.ppp0 | * Bringing up interface ppp0
net.ppp0 | * Starting pppd in ppp0 ... [ ok ]
net.ppp0 | * Backgrounding ...
net.ppp0 | * WARNING: net.ppp0 has started, but is inactive
# через ~5 сек. на модеме загорается зелёная лампочка, т.е. он подключён по GPRS'у
[/console]

cat /var/log/messages во время манипулций:

Показать

[console]May 24 15:34:05 goblin-book kernel: [ 626.714899] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:06 goblin-book kernel: [ 627.715870] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:07 goblin-book kernel: [ 628.717635] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:08 goblin-book kernel: [ 629.423159] usb usb1: wakeup_rh (auto-start)
May 24 15:34:08 goblin-book kernel: [ 629.423223] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
May 24 15:34:08 goblin-book kernel: [ 629.423249] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
May 24 15:34:08 goblin-book kernel: [ 629.423273] hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
May 24 15:34:08 goblin-book kernel: [ 629.527158] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
May 24 15:34:08 goblin-book kernel: [ 629.629106] usb 1-2: new full speed USB device using uhci_hcd and address 3
May 24 15:34:08 goblin-book kernel: [ 629.718477] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:08 goblin-book kernel: [ 629.771289] usb 1-2: default language 0x0409
May 24 15:34:08 goblin-book kernel: [ 629.790303] usb 1-2: udev 3, busnum 1, minor = 2
May 24 15:34:08 goblin-book kernel: [ 629.790325] usb 1-2: New USB device found, idVendor=19d2, idProduct=1216
May 24 15:34:08 goblin-book kernel: [ 629.790345] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
May 24 15:34:08 goblin-book kernel: [ 629.790362] usb 1-2: Product: MF192
May 24 15:34:08 goblin-book kernel: [ 629.790376] usb 1-2: Manufacturer: ZTE
May 24 15:34:08 goblin-book kernel: [ 629.790390] usb 1-2: SerialNumber: 4CB29A5C0C488171269BA118615BB46259564449
May 24 15:34:08 goblin-book kernel: [ 629.798359] usb 1-2: usb_probe_device
May 24 15:34:08 goblin-book kernel: [ 629.798385] usb 1-2: configuration #1 chosen from 1 choice
May 24 15:34:08 goblin-book kernel: [ 629.802317] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
May 24 15:34:08 goblin-book kernel: [ 629.802683] ub 1-2:1.0: usb_probe_interface
May 24 15:34:08 goblin-book kernel: [ 629.802707] ub 1-2:1.0: usb_probe_interface - got id
May 24 15:34:08 goblin-book kernel: [ 629.802743] usb-storage 1-2:1.0: usb_probe_interface
May 24 15:34:08 goblin-book kernel: [ 629.802762] usb-storage 1-2:1.0: usb_probe_interface - got id
May 24 15:34:08 goblin-book kernel: [ 629.806432] scsi3 : usb-storage 1-2:1.0
May 24 15:34:09 goblin-book kernel: [ 630.719583] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:09 goblin-book kernel: [ 630.812417] scsi 3:0:0:0: CD-ROM ZTE Datacard CD-ROM 0001 PQ: 0 ANSI: 0
May 24 15:34:09 goblin-book kernel: [ 630.821352] sr0: scsi3-mmc drive: 0x/0x caddy
May 24 15:34:09 goblin-book kernel: [ 630.829997] sr 3:0:0:0: Attached scsi CD-ROM sr0
May 24 15:34:09 goblin-book kernel: [ 630.842692] sr 3:0:0:0: Attached scsi generic sg2 type 5
May 24 15:34:09 goblin-book kernel: [ 630.968327] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:34:09 goblin-book kernel: [ 630.968373] sr: Sense Key : Hardware Error [current]
May 24 15:34:09 goblin-book kernel: [ 630.968388] sr: Add. Sense: No additional sense information
May 24 15:34:09 goblin-book kernel: [ 631.132344] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
May 24 15:34:09 goblin-book kernel: [ 631.132388] sr: Sense Key : Hardware Error [current]
May 24 15:34:09 goblin-book kernel: [ 631.132402] sr: Add. Sense: No additional sense information
May 24 15:34:10 goblin-book kernel: [ 631.720513] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:11 goblin-book kernel: [ 632.720992] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:12 goblin-book kernel: [ 633.722391] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:13 goblin-book kernel: [ 634.723271] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:14 goblin-book kernel: [ 635.724454] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:15 goblin-book kernel: [ 636.725726] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:16 goblin-book kernel: [ 637.726673] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:17 goblin-book kernel: [ 638.727697] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:18 goblin-book kernel: [ 639.728555] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:19 goblin-book kernel: [ 640.729520] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:20 goblin-book kernel: [ 641.730873] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:21 goblin-book kernel: [ 642.666188] usb 1-2: uhci_result_common: failed with status 440000
May 24 15:34:21 goblin-book kernel: [ 642.717150] hub 1-0:1.0: logical disconnect on port 2
May 24 15:34:21 goblin-book kernel: [ 642.717259] hub 1-0:1.0: state 7 ports 2 chg 0004 evt 0000
May 24 15:34:21 goblin-book kernel: [ 642.717294] hub 1-0:1.0: port 2, status 0100, change 0000, 12 Mb/s
May 24 15:34:21 goblin-book kernel: [ 642.717312] usb 1-2: USB disconnect, address 3
May 24 15:34:21 goblin-book kernel: [ 642.717327] usb 1-2: unregistering device
May 24 15:34:21 goblin-book kernel: [ 642.717342] usb 1-2: unregistering interface 1-2:1.0
May 24 15:34:21 goblin-book kernel: [ 642.732533] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:21 goblin-book kernel: [ 642.752460] usb 1-2: usb_disable_device nuking all URBs
May 24 15:34:22 goblin-book kernel: [ 643.734313] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:22 goblin-book kernel: [ 643.750107] usb usb1: suspend_rh (auto-stop)
May 24 15:34:23 goblin-book kernel: [ 644.734943] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:24 goblin-book kernel: [ 645.735998] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:25 goblin-book kernel: [ 646.737235] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:26 goblin-book kernel: [ 647.738445] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:27 goblin-book kernel: [ 648.739846] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:28 goblin-book kernel: [ 649.740785] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:29 goblin-book kernel: [ 650.742241] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:30 goblin-book kernel: [ 651.657905] usb usb1: wakeup_rh (auto-start)
May 24 15:34:30 goblin-book kernel: [ 651.657971] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
May 24 15:34:30 goblin-book kernel: [ 651.658094] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00
May 24 15:34:30 goblin-book kernel: [ 651.658127] hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
May 24 15:34:30 goblin-book kernel: [ 651.743487] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:30 goblin-book kernel: [ 651.763396] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
May 24 15:34:30 goblin-book kernel: [ 651.865130] usb 1-2: new full speed USB device using uhci_hcd and address 4
May 24 15:34:30 goblin-book kernel: [ 652.007037] usb 1-2: skipped 3 descriptors after interface
May 24 15:34:30 goblin-book kernel: [ 652.007054] usb 1-2: skipped 4 descriptors after interface
May 24 15:34:30 goblin-book kernel: [ 652.007071] usb 1-2: skipped 4 descriptors after interface
May 24 15:34:30 goblin-book kernel: [ 652.007085] usb 1-2: skipped 4 descriptors after interface
May 24 15:34:30 goblin-book kernel: [ 652.007099] usb 1-2: skipped 4 descriptors after interface
May 24 15:34:30 goblin-book kernel: [ 652.012001] usb 1-2: default language 0x0409
May 24 15:34:30 goblin-book kernel: [ 652.029071] usb 1-2: udev 4, busnum 1, minor = 3
May 24 15:34:30 goblin-book kernel: [ 652.029092] usb 1-2: New USB device found, idVendor=19d2, idProduct=1218
May 24 15:34:30 goblin-book kernel: [ 652.029111] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
May 24 15:34:30 goblin-book kernel: [ 652.029128] usb 1-2: Product: MF192
May 24 15:34:30 goblin-book kernel: [ 652.029142] usb 1-2: Manufacturer: ZTE
May 24 15:34:30 goblin-book kernel: [ 652.029156] usb 1-2: SerialNumber: 4CB29A5C0C488171269BA118615BB46259564449
May 24 15:34:30 goblin-book kernel: [ 652.036419] usb 1-2: usb_probe_device
May 24 15:34:30 goblin-book kernel: [ 652.036446] usb 1-2: configuration #1 chosen from 1 choice
May 24 15:34:30 goblin-book kernel: [ 652.039953] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
May 24 15:34:30 goblin-book kernel: [ 652.041576] usb 1-2: adding 1-2:1.1 (config #1, interface 1)
May 24 15:34:30 goblin-book kernel: [ 652.041992] usb 1-2: adding 1-2:1.2 (config #1, interface 2)
May 24 15:34:30 goblin-book kernel: [ 652.044953] usb 1-2: adding 1-2:1.3 (config #1, interface 3)
May 24 15:34:30 goblin-book kernel: [ 652.047948] usb 1-2: adding 1-2:1.4 (config #1, interface 4)
May 24 15:34:30 goblin-book kernel: [ 652.049940] usb 1-2: adding 1-2:1.5 (config #1, interface 5)
May 24 15:34:30 goblin-book kernel: [ 652.051900] usb 1-2: adding 1-2:1.6 (config #1, interface 6)
May 24 15:34:30 goblin-book kernel: [ 652.053427] usb 1-2: adding 1-2:1.7 (config #1, interface 7)
May 24 15:34:30 goblin-book kernel: [ 652.055756] usb 1-2: adding 1-2:1.8 (config #1, interface 8)
May 24 15:34:30 goblin-book kernel: [ 652.057777] usb 1-2: adding 1-2:1.9 (config #1, interface 9)
May 24 15:34:30 goblin-book kernel: [ 652.058926] ub 1-2:1.9: usb_probe_interface
May 24 15:34:30 goblin-book kernel: [ 652.058951] ub 1-2:1.9: usb_probe_interface - got id
May 24 15:34:30 goblin-book kernel: [ 652.058991] usb-storage 1-2:1.9: usb_probe_interface
May 24 15:34:30 goblin-book kernel: [ 652.059307] usb-storage 1-2:1.9: usb_probe_interface - got id
May 24 15:34:30 goblin-book kernel: [ 652.061887] scsi4 : usb-storage 1-2:1.9
May 24 15:34:30 goblin-book kernel: [ 652.181596] cdc_acm 1-2:1.1: usb_probe_interface
May 24 15:34:30 goblin-book kernel: [ 652.181610] cdc_acm 1-2:1.1: usb_probe_interface - got id
May 24 15:34:30 goblin-book kernel: [ 652.181726] cdc_acm 1-2:1.1: ttyACM0: USB ACM device
May 24 15:34:31 goblin-book kernel: [ 652.185343] cdc_acm 1-2:1.3: usb_probe_interface
May 24 15:34:31 goblin-book kernel: [ 652.185359] cdc_acm 1-2:1.3: usb_probe_interface - got id
May 24 15:34:31 goblin-book kernel: [ 652.185496] cdc_acm 1-2:1.3: ttyACM1: USB ACM device
May 24 15:34:31 goblin-book kernel: [ 652.188453] cdc_acm 1-2:1.5: usb_probe_interface
May 24 15:34:31 goblin-book kernel: [ 652.188465] cdc_acm 1-2:1.5: usb_probe_interface - got id
May 24 15:34:31 goblin-book kernel: [ 652.188559] cdc_acm 1-2:1.5: ttyACM2: USB ACM device
May 24 15:34:31 goblin-book kernel: [ 652.190168] cdc_acm 1-2:1.7: usb_probe_interface
May 24 15:34:31 goblin-book kernel: [ 652.190181] cdc_acm 1-2:1.7: usb_probe_interface - got id
May 24 15:34:31 goblin-book kernel: [ 652.190985] cdc_acm 1-2:1.7: ttyACM3: USB ACM device
May 24 15:34:31 goblin-book kernel: [ 652.193327] usbcore: registered new interface driver cdc_acm
May 24 15:34:31 goblin-book kernel: [ 652.193337] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
May 24 15:34:31 goblin-book modem-manager: (ttyACM1) opening serial device...
May 24 15:34:31 goblin-book kernel: [ 652.328832] uhci_hcd 0000:00:1d.0: reserve dev 4 ep83-INT, period 4, phase 2, 61 us
May 24 15:34:31 goblin-book modem-manager: (ttyACM1): probe requested by plugin 'ZTE'
May 24 15:34:31 goblin-book modem-manager: (ttyACM3) opening serial device...
May 24 15:34:31 goblin-book kernel: [ 652.386725] uhci_hcd 0000:00:1d.0: reserve dev 4 ep87-INT, period 4, phase 2, 61 us
May 24 15:34:31 goblin-book modem-manager: (ttyACM3): probe requested by plugin 'ZTE'
May 24 15:34:31 goblin-book modem-manager: (ttyACM0) opening serial device...
May 24 15:34:31 goblin-book kernel: [ 652.425761] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 4, phase 2, 61 us
May 24 15:34:31 goblin-book modem-manager: (ttyACM0): probe requested by plugin 'ZTE'
May 24 15:34:31 goblin-book modem-manager: (ttyACM2) opening serial device...
May 24 15:34:31 goblin-book kernel: [ 652.452585] uhci_hcd 0000:00:1d.0: reserve dev 4 ep85-INT, period 4, phase 2, 61 us
May 24 15:34:31 goblin-book modem-manager: (ttyACM2): probe requested by plugin 'ZTE'
May 24 15:34:31 goblin-book kernel: [ 652.744676] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:31 goblin-book kernel: [ 653.074152] scsi 4:0:0:0: CD-ROM ZTE Datacard CD-ROM 0001 PQ: 0 ANSI: 0
May 24 15:34:31 goblin-book kernel: [ 653.081181] sr0: scsi3-mmc drive: 0x/0x caddy
May 24 15:34:31 goblin-book kernel: [ 653.093327] sr 4:0:0:0: Attached scsi CD-ROM sr0
May 24 15:34:31 goblin-book kernel: [ 653.097463] sr 4:0:0:0: Attached scsi generic sg2 type 5
May 24 15:34:32 goblin-book kernel: [ 653.222105] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
May 24 15:34:32 goblin-book kernel: [ 653.222149] sr: Sense Key : Hardware Error [current]
May 24 15:34:32 goblin-book kernel: [ 653.222163] sr: Add. Sense: No additional sense information
May 24 15:34:32 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:32 goblin-book kernel: [ 653.745680] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:33 goblin-book kernel: [ 654.746646] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:34 goblin-book kernel: [ 655.747498] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:35 goblin-book kernel: [ 656.748486] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:36 goblin-book kernel: [ 657.749442] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:36 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:36 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:36 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:37 goblin-book kernel: [ 658.750392] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:38 goblin-book kernel: [ 659.751463] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:39 goblin-book kernel: [ 660.752703] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:40 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:40 goblin-book kernel: [ 661.753940] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:41 goblin-book kernel: [ 662.755262] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:42 goblin-book kernel: [ 663.755880] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:43 goblin-book kernel: [ 664.756779] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:43 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:44 goblin-book kernel: [ 665.757743] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:45 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:45 goblin-book modem-manager: (ttyACM1) closing serial device...
May 24 15:34:45 goblin-book kernel: [ 666.212015] uhci_hcd 0000:00:1d.0: release dev 4 ep83-INT, period 4, phase 2, 61 us
May 24 15:34:45 goblin-book modem-manager: (ttyACM0) closing serial device...
May 24 15:34:45 goblin-book kernel: [ 666.230992] uhci_hcd 0000:00:1d.0: release dev 4 ep81-INT, period 4, phase 2, 61 us
May 24 15:34:45 goblin-book kernel: [ 666.758668] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:45 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:45 goblin-book modem-manager: (ttyACM1) opening serial device...
May 24 15:34:45 goblin-book kernel: [ 667.056414] uhci_hcd 0000:00:1d.0: reserve dev 4 ep83-INT, period 4, phase 2, 61 us
May 24 15:34:45 goblin-book modem-manager: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2 claimed port ttyACM1
May 24 15:34:45 goblin-book modem-manager: Added modem /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2
May 24 15:34:45 goblin-book modem-manager: (tty/ttyACM3): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2
May 24 15:34:45 goblin-book modem-manager: (tty/ttyACM3): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2
May 24 15:34:45 goblin-book modem-manager: (ZTE): GSM modem /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2 claimed port ttyACM0
May 24 15:34:45 goblin-book modem-manager: (tty/ttyACM3): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2
May 24 15:34:46 goblin-book kernel: [ 667.760237] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:46 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:46 goblin-book modem-manager: (ttyACM1) closing serial device...
May 24 15:34:46 goblin-book kernel: [ 667.878990] uhci_hcd 0000:00:1d.0: release dev 4 ep83-INT, period 4, phase 2, 61 us
May 24 15:34:46 goblin-book modem-manager: (tty/ttyACM3): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2
May 24 15:34:47 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:47 goblin-book kernel: [ 668.760801] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:48 goblin-book kernel: [ 669.761958] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:49 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:49 goblin-book kernel: [ 670.763403] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:49 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:50 goblin-book kernel: [ 671.764331] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:50 goblin-book modem-manager: Got failure code 100: Unknown error
May 24 15:34:50 goblin-book modem-manager: (ttyACM3) closing serial device...
May 24 15:34:50 goblin-book kernel: [ 671.909986] uhci_hcd 0000:00:1d.0: release dev 4 ep87-INT, period 4, phase 2, 61 us
May 24 15:34:50 goblin-book modem-manager: (tty/ttyACM3): ignoring port unsupported by physical modem's plugin
May 24 15:34:50 goblin-book modem-manager: (tty/ttyACM2): outstanding support task prevents export of /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2
May 24 15:34:51 goblin-book kernel: [ 672.765474] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:52 goblin-book kernel: [ 673.766685] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:53 goblin-book kernel: [ 674.767800] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:54 goblin-book kernel: [ 675.768681] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:55 goblin-book kernel: [ 676.769586] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:56 goblin-book kernel: [ 677.770821] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:57 goblin-book kernel: [ 678.772444] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:58 goblin-book kernel: [ 679.773764] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:34:59 goblin-book kernel: [ 680.774869] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:00 goblin-book kernel: [ 681.776432] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:01 goblin-book kernel: [ 682.777427] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:02 goblin-book kernel: [ 683.778540] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:03 goblin-book kernel: [ 684.779494] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:04 goblin-book kernel: [ 685.780489] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:05 goblin-book kernel: [ 686.781490] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:06 goblin-book kernel: [ 687.782714] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:07 goblin-book kernel: [ 688.783951] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:07 goblin-book modem-manager: (ttyACM2) closing serial device...
May 24 15:35:07 goblin-book kernel: [ 689.006996] uhci_hcd 0000:00:1d.0: release dev 4 ep85-INT, period 4, phase 2, 61 us
May 24 15:35:07 goblin-book modem-manager: (ttyACM2) opening serial device...
May 24 15:35:07 goblin-book kernel: [ 689.023668] uhci_hcd 0000:00:1d.0: reserve dev 4 ep85-INT, period 4, phase 2, 61 us
May 24 15:35:08 goblin-book kernel: [ 689.785484] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:09 goblin-book kernel: [ 690.786486] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:10 goblin-book kernel: [ 691.787495] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:11 goblin-book kernel: [ 692.788508] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:12 goblin-book kernel: [ 693.789681] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:13 goblin-book sudo: alexander : TTY=pts/3 ; PWD=/home/alexander ; USER=root ; COMMAND=/sbin/modprobe options
May 24 15:35:13 goblin-book sudo: pam_unix(sudo:session): session opened for user root by (uid=0)
May 24 15:35:13 goblin-book kernel: [ 694.790828] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:13 goblin-book modem-manager: (ttyACM2) closing serial device...
May 24 15:35:13 goblin-book kernel: [ 695.006998] uhci_hcd 0000:00:1d.0: release dev 4 ep85-INT, period 4, phase 2, 61 us
May 24 15:35:13 goblin-book modem-manager: (tty/ttyACM2): ignoring port unsupported by physical modem's plugin
May 24 15:35:13 goblin-book modem-manager: Exported modem /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2 as /org/freedesktop/ModemManager/Modems/0
May 24 15:35:13 goblin-book modem-manager: (/org/freedesktop/ModemManager/Modems/0): data port is ttyACM1
May 24 15:35:14 goblin-book kernel: [ 695.792449] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:15 goblin-book kernel: [ 696.793476] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:16 goblin-book kernel: [ 697.794412] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:16 goblin-book sudo: alexander : TTY=pts/3 ; PWD=/home/alexander ; USER=root ; COMMAND=/sbin/modprobe option
May 24 15:35:16 goblin-book sudo: pam_unix(sudo:session): session opened for user root by (uid=0)
May 24 15:35:16 goblin-book kernel: [ 698.182444] usbcore: registered new interface driver usbserial
May 24 15:35:16 goblin-book kernel: [ 698.182501] USB Serial support registered for generic
May 24 15:35:16 goblin-book kernel: [ 698.182536] usbserial_generic 4-1:1.2: usb_probe_interface
May 24 15:35:16 goblin-book kernel: [ 698.182546] usbserial_generic 4-1:1.2: usb_probe_interface - got id
May 24 15:35:16 goblin-book kernel: [ 698.182572] usbserial_generic 4-1:1.3: usb_probe_interface
May 24 15:35:16 goblin-book kernel: [ 698.182580] usbserial_generic 4-1:1.3: usb_probe_interface - got id
May 24 15:35:16 goblin-book kernel: [ 698.182603] usbserial_generic 1-2:1.0: usb_probe_interface
May 24 15:35:16 goblin-book kernel: [ 698.182612] usbserial_generic 1-2:1.0: usb_probe_interface - got id
May 24 15:35:16 goblin-book kernel: [ 698.182667] usbcore: registered new interface driver usbserial_generic
May 24 15:35:16 goblin-book kernel: [ 698.182675] usbserial: USB Serial Driver core
May 24 15:35:17 goblin-book kernel: [ 698.214420] USB Serial support registered for GSM modem (1-port)
May 24 15:35:17 goblin-book kernel: [ 698.215751] usbcore: registered new interface driver option
May 24 15:35:17 goblin-book kernel: [ 698.215761] option: v0.7.2:USB Driver for GSM modems
May 24 15:35:17 goblin-book kernel: [ 698.795535] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:18 goblin-book kernel: [ 699.796499] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:19 goblin-book kernel: [ 700.797544] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:20 goblin-book kernel: [ 701.798495] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:20 goblin-book kernel: [ 702.073200] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:20 goblin-book kernel: [ 702.073245] sr: Sense Key : Hardware Error [current]
May 24 15:35:20 goblin-book kernel: [ 702.073259] sr: Add. Sense: No additional sense information
May 24 15:35:20 goblin-book kernel: [ 702.167113] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:20 goblin-book kernel: [ 702.167158] sr: Sense Key : Hardware Error [current]
May 24 15:35:20 goblin-book kernel: [ 702.167173] sr: Add. Sense: No additional sense information
May 24 15:35:21 goblin-book kernel: [ 702.399129] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:21 goblin-book kernel: [ 702.399175] sr: Sense Key : Hardware Error [current]
May 24 15:35:21 goblin-book kernel: [ 702.399190] sr: Add. Sense: No additional sense information
May 24 15:35:21 goblin-book kernel: [ 702.432120] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:21 goblin-book kernel: [ 702.432165] sr: Sense Key : Hardware Error [current]
May 24 15:35:21 goblin-book kernel: [ 702.432180] sr: Add. Sense: No additional sense information
May 24 15:35:21 goblin-book kernel: [ 702.466200] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:21 goblin-book kernel: [ 702.466246] sr: Sense Key : Hardware Error [current]
May 24 15:35:21 goblin-book kernel: [ 702.466261] sr: Add. Sense: No additional sense information
May 24 15:35:21 goblin-book kernel: [ 702.799539] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:22 goblin-book kernel: [ 703.800805] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:22 goblin-book kernel: [ 704.072127] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:22 goblin-book kernel: [ 704.072172] sr: Sense Key : Hardware Error [current]
May 24 15:35:22 goblin-book kernel: [ 704.072187] sr: Add. Sense: No additional sense information
May 24 15:35:23 goblin-book kernel: [ 704.802410] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:24 goblin-book kernel: [ 705.803651] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:24 goblin-book kernel: [ 706.068118] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:24 goblin-book kernel: [ 706.068162] sr: Sense Key : Hardware Error [current]
May 24 15:35:24 goblin-book kernel: [ 706.068177] sr: Add. Sense: No additional sense information
May 24 15:35:25 goblin-book kernel: [ 706.804651] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:26 goblin-book kernel: [ 707.805844] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:26 goblin-book kernel: [ 708.068120] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:26 goblin-book kernel: [ 708.068165] sr: Sense Key : Hardware Error [current]
May 24 15:35:26 goblin-book kernel: [ 708.068179] sr: Add. Sense: No additional sense information
May 24 15:35:27 goblin-book kernel: [ 708.807453] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:28 goblin-book kernel: [ 709.808618] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:28 goblin-book kernel: [ 710.068100] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:28 goblin-book kernel: [ 710.068145] sr: Sense Key : Hardware Error [current]
May 24 15:35:28 goblin-book kernel: [ 710.068160] sr: Add. Sense: No additional sense information
May 24 15:35:29 goblin-book kernel: [ 710.809459] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:30 goblin-book kernel: [ 711.810780] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:30 goblin-book kernel: [ 712.068120] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:30 goblin-book kernel: [ 712.068164] sr: Sense Key : Hardware Error [current]
May 24 15:35:30 goblin-book kernel: [ 712.068179] sr: Add. Sense: No additional sense information
May 24 15:35:31 goblin-book kernel: [ 712.811910] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:32 goblin-book kernel: [ 713.813330] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:32 goblin-book kernel: [ 714.068118] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:32 goblin-book kernel: [ 714.068163] sr: Sense Key : Hardware Error [current]
May 24 15:35:32 goblin-book kernel: [ 714.068177] sr: Add. Sense: No additional sense information
May 24 15:35:33 goblin-book kernel: [ 714.814244] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:34 goblin-book kernel: [ 715.814994] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:34 goblin-book kernel: [ 716.068179] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:34 goblin-book kernel: [ 716.068224] sr: Sense Key : Hardware Error [current]
May 24 15:35:34 goblin-book kernel: [ 716.068239] sr: Add. Sense: No additional sense information
May 24 15:35:35 goblin-book kernel: [ 716.816242] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:36 goblin-book kernel: [ 717.817283] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:36 goblin-book kernel: [ 718.068163] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:36 goblin-book kernel: [ 718.068207] sr: Sense Key : Hardware Error [current]
May 24 15:35:36 goblin-book kernel: [ 718.068222] sr: Add. Sense: No additional sense information
May 24 15:35:37 goblin-book kernel: [ 718.818464] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:38 goblin-book kernel: [ 719.819642] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:38 goblin-book kernel: [ 720.068117] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:38 goblin-book kernel: [ 720.068161] sr: Sense Key : Hardware Error [current]
May 24 15:35:38 goblin-book kernel: [ 720.068176] sr: Add. Sense: No additional sense information
May 24 15:35:39 goblin-book kernel: [ 720.820641] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:40 goblin-book kernel: [ 721.821692] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:40 goblin-book kernel: [ 722.068137] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:40 goblin-book kernel: [ 722.068181] sr: Sense Key : Hardware Error [current]
May 24 15:35:40 goblin-book kernel: [ 722.068196] sr: Add. Sense: No additional sense information
May 24 15:35:41 goblin-book kernel: [ 722.822623] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:42 goblin-book kernel: [ 723.823655] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:42 goblin-book kernel: [ 724.069131] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:42 goblin-book kernel: [ 724.069174] sr: Sense Key : Hardware Error [current]
May 24 15:35:42 goblin-book kernel: [ 724.069189] sr: Add. Sense: No additional sense information
May 24 15:35:43 goblin-book kernel: [ 724.824471] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:44 goblin-book kernel: [ 725.825407] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:44 goblin-book kernel: [ 726.068106] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:44 goblin-book kernel: [ 726.068151] sr: Sense Key : Hardware Error [current]
May 24 15:35:44 goblin-book kernel: [ 726.068166] sr: Add. Sense: No additional sense information
May 24 15:35:45 goblin-book kernel: [ 726.826334] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:46 goblin-book kernel: [ 727.827240] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:46 goblin-book kernel: [ 728.068107] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:46 goblin-book kernel: [ 728.068152] sr: Sense Key : Hardware Error [current]
May 24 15:35:46 goblin-book kernel: [ 728.068166] sr: Add. Sense: No additional sense information
May 24 15:35:47 goblin-book kernel: [ 728.827793] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:48 goblin-book kernel: [ 729.829487] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:48 goblin-book kernel: [ 730.094084] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:48 goblin-book kernel: [ 730.094114] sr: Sense Key : Hardware Error [current]
May 24 15:35:48 goblin-book kernel: [ 730.094124] sr: Add. Sense: No additional sense information
May 24 15:35:49 goblin-book kernel: [ 730.830519] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:50 goblin-book kernel: [ 731.831802] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:50 goblin-book kernel: [ 732.068116] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:50 goblin-book kernel: [ 732.068172] sr: Sense Key : Hardware Error [current]
May 24 15:35:50 goblin-book kernel: [ 732.068192] sr: Add. Sense: No additional sense information
May 24 15:35:51 goblin-book kernel: [ 732.832678] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:52 goblin-book kernel: [ 733.833893] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:52 goblin-book kernel: [ 734.068107] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:52 goblin-book kernel: [ 734.068152] sr: Sense Key : Hardware Error [current]
May 24 15:35:52 goblin-book kernel: [ 734.068167] sr: Add. Sense: No additional sense information
May 24 15:35:53 goblin-book kernel: [ 734.835339] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:54 goblin-book kernel: [ 735.836387] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:54 goblin-book kernel: [ 736.068117] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:54 goblin-book kernel: [ 736.068160] sr: Sense Key : Hardware Error [current]
May 24 15:35:54 goblin-book kernel: [ 736.068175] sr: Add. Sense: No additional sense information
May 24 15:35:55 goblin-book kernel: [ 736.837288] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:56 goblin-book kernel: [ 737.838356] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:56 goblin-book kernel: [ 738.071144] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:56 goblin-book kernel: [ 738.071189] sr: Sense Key : Hardware Error [current]
May 24 15:35:56 goblin-book kernel: [ 738.071204] sr: Add. Sense: No additional sense information
May 24 15:35:57 goblin-book kernel: [ 738.839492] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:58 goblin-book kernel: [ 739.840384] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:35:58 goblin-book kernel: [ 740.068109] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:35:58 goblin-book kernel: [ 740.068152] sr: Sense Key : Hardware Error [current]
May 24 15:35:58 goblin-book kernel: [ 740.068167] sr: Add. Sense: No additional sense information
May 24 15:35:59 goblin-book kernel: [ 740.841323] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:00 goblin-book kernel: [ 741.842304] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:00 goblin-book kernel: [ 742.068108] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:00 goblin-book kernel: [ 742.068153] sr: Sense Key : Hardware Error [current]
May 24 15:36:00 goblin-book kernel: [ 742.068168] sr: Add. Sense: No additional sense information
May 24 15:36:01 goblin-book kernel: [ 742.843366] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:02 goblin-book kernel: [ 743.844437] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:02 goblin-book kernel: [ 744.068150] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:02 goblin-book kernel: [ 744.068194] sr: Sense Key : Hardware Error [current]
May 24 15:36:02 goblin-book kernel: [ 744.068209] sr: Add. Sense: No additional sense information
May 24 15:36:03 goblin-book kernel: [ 744.845392] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:04 goblin-book kernel: [ 745.846423] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:04 goblin-book kernel: [ 746.069132] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:04 goblin-book kernel: [ 746.069177] sr: Sense Key : Hardware Error [current]
May 24 15:36:04 goblin-book kernel: [ 746.069191] sr: Add. Sense: No additional sense information
May 24 15:36:05 goblin-book kernel: [ 746.847339] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:06 goblin-book kernel: [ 747.848291] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:06 goblin-book kernel: [ 748.068116] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:06 goblin-book kernel: [ 748.068159] sr: Sense Key : Hardware Error [current]
May 24 15:36:06 goblin-book kernel: [ 748.068174] sr: Add. Sense: No additional sense information
May 24 15:36:07 goblin-book kernel: [ 748.849532] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:08 goblin-book sudo: alexander : TTY=pts/3 ; PWD=/home/alexander ; USER=root ; COMMAND=/etc/init.d/net.ppp0 start
May 24 15:36:08 goblin-book sudo: pam_unix(sudo:session): session opened for user root by (uid=0)
May 24 15:36:08 goblin-book kernel: [ 749.850552] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:08 goblin-book pppd[3356]: Plugin passwordfd.so loaded.
May 24 15:36:08 goblin-book kernel: [ 750.042443] PPP generic driver version 2.4.2
May 24 15:36:08 goblin-book pppd[3356]: Created /dev/ppp device node
May 24 15:36:08 goblin-book pppd[3360]: pppd 2.4.4 started by root, uid 0
May 24 15:36:08 goblin-book kernel: [ 750.052685] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 4, phase 2, 61 us
May 24 15:36:08 goblin-book /etc/init.d/net.ppp0[3280]: WARNING: net.ppp0 has started, but is inactive
May 24 15:36:08 goblin-book kernel: [ 750.077073] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:08 goblin-book kernel: [ 750.077099] sr: Sense Key : Hardware Error [current]
May 24 15:36:08 goblin-book kernel: [ 750.077108] sr: Add. Sense: No additional sense information
May 24 15:36:09 goblin-book kernel: [ 750.851404] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:09 goblin-book chat[3363]: abort on (BUSY)
May 24 15:36:09 goblin-book chat[3363]: abort on (ERROR)
May 24 15:36:09 goblin-book chat[3363]: abort on (NO ANSWER)
May 24 15:36:09 goblin-book chat[3363]: abort on (NO CARRIER)
May 24 15:36:09 goblin-book chat[3363]: abort on (NO DIALTONE)
May 24 15:36:09 goblin-book chat[3363]: abort on (Invalid Login)
May 24 15:36:09 goblin-book chat[3363]: abort on (Login incorrect)
May 24 15:36:09 goblin-book chat[3363]: timeout set to 5 seconds
May 24 15:36:09 goblin-book chat[3363]: send (ATZ^M)
May 24 15:36:09 goblin-book chat[3363]: expect (OK)
May 24 15:36:09 goblin-book chat[3363]: ^M
May 24 15:36:09 goblin-book chat[3363]: OK
May 24 15:36:09 goblin-book chat[3363]: -- got it
May 24 15:36:09 goblin-book chat[3363]: send (at+CGDCONT=1,"ip","internet"^M)
May 24 15:36:10 goblin-book chat[3363]: expect (OK)
May 24 15:36:10 goblin-book chat[3363]: ^M
May 24 15:36:10 goblin-book chat[3363]: at+CGDCONT=1,"ip","internet"^M^M
May 24 15:36:10 goblin-book chat[3363]: OK
May 24 15:36:10 goblin-book chat[3363]: -- got it
May 24 15:36:10 goblin-book chat[3363]: send (ATDT*99#^M)
May 24 15:36:10 goblin-book chat[3363]: timeout set to 60 seconds
May 24 15:36:10 goblin-book chat[3363]: expect (CONNECT)
May 24 15:36:10 goblin-book chat[3363]: ^M
May 24 15:36:10 goblin-book chat[3363]: ATDT*99#^M^M
May 24 15:36:10 goblin-book chat[3363]: CONNECT
May 24 15:36:10 goblin-book chat[3363]: -- got it
May 24 15:36:10 goblin-book chat[3363]: send (^M)
May 24 15:36:10 goblin-book chat[3363]: timeout set to 5 seconds
May 24 15:36:10 goblin-book chat[3363]: expect (~)
May 24 15:36:10 goblin-book chat[3363]: 7200000^M
May 24 15:36:10 goblin-book kernel: [ 751.852398] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:10 goblin-book kernel: [ 752.067148] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:10 goblin-book kernel: [ 752.067192] sr: Sense Key : Hardware Error [current]
May 24 15:36:10 goblin-book kernel: [ 752.067206] sr: Add. Sense: No additional sense information
May 24 15:36:11 goblin-book kernel: [ 752.853320] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:12 goblin-book kernel: [ 753.854451] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:12 goblin-book kernel: [ 754.068119] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:12 goblin-book kernel: [ 754.068163] sr: Sense Key : Hardware Error [current]
May 24 15:36:12 goblin-book kernel: [ 754.068177] sr: Add. Sense: No additional sense information
May 24 15:36:13 goblin-book kernel: [ 754.855423] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:14 goblin-book kernel: [ 755.856360] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:14 goblin-book kernel: [ 756.068148] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:14 goblin-book kernel: [ 756.068192] sr: Sense Key : Hardware Error [current]
May 24 15:36:14 goblin-book kernel: [ 756.068207] sr: Add. Sense: No additional sense information
May 24 15:36:15 goblin-book chat[3363]: alarm
May 24 15:36:15 goblin-book chat[3363]: send (^M)
May 24 15:36:15 goblin-book chat[3363]: send (^M)
May 24 15:36:15 goblin-book pppd[3360]: Serial connection established.
May 24 15:36:15 goblin-book pppd[3360]: Using interface ppp0
May 24 15:36:15 goblin-book pppd[3360]: Connect: ppp0 <--> /dev/ttyACM0
May 24 15:36:15 goblin-book modem-manager: (net/ppp0): could not get port's parent device
May 24 15:36:15 goblin-book kernel: [ 756.857379] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:16 goblin-book pppd[3360]: Remote message: Icera PPP - Password Verified OK
May 24 15:36:16 goblin-book pppd[3360]: PAP authentication succeeded
May 24 15:36:16 goblin-book kernel: [ 757.724590] PPP BSD Compression module registered
May 24 15:36:16 goblin-book kernel: [ 757.738302] PPP Deflate Compression module registered
May 24 15:36:16 goblin-book kernel: [ 757.858413] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:16 goblin-book kernel: [ 758.070116] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:16 goblin-book kernel: [ 758.070160] sr: Sense Key : Hardware Error [current]
May 24 15:36:16 goblin-book kernel: [ 758.070175] sr: Add. Sense: No additional sense information
May 24 15:36:17 goblin-book pppd[3360]: local IP address 172.29.24.135
May 24 15:36:17 goblin-book pppd[3360]: remote IP address 10.0.0.1
May 24 15:36:17 goblin-book pppd[3360]: primary DNS address 213.87.0.1
May 24 15:36:17 goblin-book pppd[3360]: secondary DNS address 213.87.1.1
May 24 15:36:17 goblin-book kernel: [ 758.859408] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:18 goblin-book kernel: [ 759.860292] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:18 goblin-book kernel: [ 760.068207] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:18 goblin-book kernel: [ 760.068252] sr: Sense Key : Hardware Error [current]
May 24 15:36:18 goblin-book kernel: [ 760.068267] sr: Add. Sense: No additional sense information
May 24 15:36:19 goblin-book kernel: [ 760.861356] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:20 goblin-book kernel: [ 761.862333] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:20 goblin-book kernel: [ 762.068660] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:20 goblin-book kernel: [ 762.068738] sr: Sense Key : Hardware Error [current]
May 24 15:36:20 goblin-book kernel: [ 762.068759] sr: Add. Sense: No additional sense information
May 24 15:36:21 goblin-book kernel: [ 762.864869] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:22 goblin-book kernel: [ 763.866335] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 817
May 24 15:36:22 goblin-book kernel: [ 764.070215] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:22 goblin-book kernel: [ 764.070259] sr: Sense Key : Hardware Error [current]
May 24 15:36:22 goblin-book kernel: [ 764.070274] sr: Add. Sense: No additional sense information
[/console]

cat /etc/conf.d/net

Показать

[console]config_ppp0=( "ppp" )
link_ppp0="/dev/ttyACM0"
username_ppp0="mts"
password_ppp0="mts"
pppd_ppp0=(
"noauth"
"default-asyncmap"
"defaultroute"
"usepeerdns"
"ipcp-accept-remote"
"ipcp-accept-local"
"lcp-echo-interval 22"
"lcp-echo-failure 5"
"mru 1492"
"mtu 1492"
)
chat_ppp0=(
"ABORT" "BUSY"
"ABORT" "'ERROR'"
"ABORT" "'NO ANSWER'"
"ABORT" "'NO CARRIER'"
"ABORT" "'NO DIALTONE'"
"ABORT" "'Invalid Login'"
"ABORT" "'Login incorrect'"
"TIMEOUT" "5"
"''" "ATZ"
"OK" "'at+CGDCONT=1,\"ip\",\"internet\"'"
"OK" "ATDT*99#"
"TIMEOUT" "60"
"CONNECT" "''"
"TIMEOUT" "5"
"'~--'" "''"
)
[/console]

итак вопросы:
что за заклинания я прописал в /etc/conf.d/net?
какой гуйнёй можно заменить эту настройку? хорошо бы что-бы таже гадость занималась вайфаем и беспроводной сетью... в общем, nm это умеет?
как автоматом подгружать модули/делать eject для псевдопривода?
как производить другие операции с модемом типа узнать счёт итп?
как вообще общаться с модемами, что такое строки инициализации и где об этом почитать?
ЗЫ: ядро 2.6.38

24.05.2011 18:49 #164665

1) pppd_ppp0 - параметры pppd, man pppd Вам поможет. chat_ppp0 - "общение" модема с линией, тот же man.
2) nm это все умеет
3) копайте udev
4) например так, http://habrahabr.ru/blogs/telecom/98846/
5) если Вы имеете ввиду AT-команды, то они, в принципе, почти одинаковы для всех модемов. Вот на почитать для zte http://download.maritex.com.pl/pdfs/wi/AT%20ZTE.pdf

24.05.2011 19:17 #164672

Fat-Zer написал:
какой гуйнёй можно заменить эту настройку?

У меня Gnome-PPP, но можно и KPPP. Смотря какой рабочий стол.

Fat-Zer написал:
как автоматом подгружать модули/делать eject для псевдопривода?

Установить usb_modeswitch с соответствующими правилами для udev.

Fat-Zer написал:
как производить другие операции с модемом типа узнать счёт итп?

[console]echo " AT+CUSD=1,AA180C365200,15" > /dev/ttyACM0 | grep -m1 CUSD /dev/ttyACM0 [/console] Баланс для МегаФона примерно так. Ответ будет кодированный.

Fat-Zer написал:
как вообще общаться с модемами, что такое строки инициализации и где об этом почитать?

[console]"'at+CGDCONT=1,\"ip\",\"internet\"'"[/console] Узнаёте? Это и есть строка инициализации.
Смотрите AT-команды.

25.05.2011 05:14 #164734

DdShurick написал:
Смотрите AT-команды.

нужно ли думать при вводи оных? т.е. есть ли среди них команды которыми я могу всё испортить, сломать, уничтожить?

поправте насчёт понимания параметров:

Показать

text


        "noauth" - без авторизации у провайдера
        "default-asyncmap" - не понял, что это... wtf?
        "defaultroute" - добавлять в роут строчку с роутом через провайдера, при отключении автоматом убирать её...
        "usepeerdns" - молучать от провайдера адреса dns сервисов
        "ipcp-accept-remote" - принимать IP который провайдер предложил для себя
        "ipcp-accept-local" - то же самое, но для локального интерфейса
        "lcp-echo-interval 22" - слать пинги каждые 22 секунды
        "lcp-echo-failure 5" - если нет 5-ти пингов кряду, то считать, что удалённая сторона повисла/упала
        "mru 1492" - попросить провайдера слать мне пакета не больше этого. не стоит ли установить этот параметр побольше? и что это за магическое число 1492?
        "mtu 1492" - аналогично на исходящие пакеты.

ещё после подключения в логе ядра постоянно проскакивают ошибки вида:
[console]May 24 15:36:06 goblin-book kernel: [ 748.068116] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
May 24 15:36:06 goblin-book kernel: [ 748.068159] sr: Sense Key : Hardware Error [current]
May 24 15:36:06 goblin-book kernel: [ 748.068174] sr: Add. Sense: No additional sense information[/console]
что с этим делать?

при подключении вываливается варнинг:
[console]
net.ppp0 | * Bringing up interface ppp0
net.ppp0 | * Starting pppd in ppp0 ... [ ok ]
net.ppp0 | * Backgrounding ...
net.ppp0 | * WARNING: net.ppp0 has started, but is inactive[/console]
вроде не критично, но глаза мозолит...

25.05.2011 12:27 #164784

Fat-Zer написал:
"noauth" - без авторизации у провайдера

- наоборот, без авторизации у Вас smile

Fat-Zer написал:
"default-asyncmap" - не понял, что это... wtf?

- это очень сильное колдунство
В общем, вот все написано http://www.opennet.ru/man.shtml?topic=pppd&category=8

Fat-Zer написал:
что с этим делать?

ZeroCD можно отключать, http://ru.gentoo-wiki.com/wiki/MF626#.D0.A1_.D0.BE.D1.82.D0.BA.D0.BB.D1.8E.D1.87.D0.B5.D0.BD.D0.B8.D0.B5.D0.BC_ZeroCD - правда, для другой модели, но принцип, думаю, тот же.

25.05.2011 12:43 #164789

Usr. Bin написал:
В общем, вот все написано http://www.opennet.ru/man.shtml?topic=p … category=8

читал, но там слишком много умных слов..

Usr. Bin написал:
- наоборот, без авторизации у Вас

в чём разница?

Usr. Bin написал:
ZeroCD можно отключать, http://ru.gentoo-wiki.com/wiki/MF626#.D … .BC_ZeroCD - правда, для другой модели, но принцип, думаю, тот же.

руководство устарело с появлением 2.6.28, а копаться в ядре или модеме ради одной строчки в логах не хочется...

25.05.2011 13:10 #164794

Fat-Zer написал:
читал, но там слишком много умных слов..

Здесь тоже много умных слов, но надо почитать.... Без них никак... wink
Ну и до кучи при подключенном в порт модеме, вывод "дежурных" команд от root
[console]lsusb
dmesg | grep usb
ls /dev/ttyUSB*
ls /dev/ttyACM*[/console]
Ещё надо установить usb_modeswitch.

25.05.2011 13:12 · отредактировано #164796

Fat-Zer написал:
руководство устарело с появлением 2.6.28

если руководствоваться именно этим способом, то ядро тут не причем. А руководство действительно устарело, оказывается можно просто дать модему AT+ZCDRUN=8 (рекомендую использовать для посылки AT-команд программу minicom)

Fat-Zer написал:
в чём разница?

как Вы авторизируетесь у дрогой стороны (провайдера, например), так и она должна авторизироваться у Вас, в случае с провайдером такой необходимости нету, поэтому noauth

25.05.2011 13:30 · отредактировано #164798

Gnom написал:
Здесь тоже много умных слов, но надо почитать.... Без них никак...

читал, ничего нового там нет... читайте внимательнее первый пост, модем уже настроен, идёт допил неровностей...

Gnom написал:
Ну и до кучи при подключенном в порт модеме, вывод "дежурных" команд от root

всё есть в первом посте.

Gnom написал:
Ещё надо установить usb_modeswitch.

по вашей же ссылке написано, что модем этот не поддерживается.

Usr. Bin написал:
если руководствоваться именно этим способом, то ядро тут не причем. А руководство действительно устарело, оказывается можно просто дать модему AT+ZCDRUN=8 (рекомендую использовать для посылки AT-команд программу minicom)

вот это интересно... попробую, можно узнать откуда инфа? А чем ещё можно пользоваться, а то миником когда-то ковырял, но так и не освоил...

Usr. Bin написал:
как Вы авторизируетесь у дрогой стороны (провайдера, например), так и она должна авторизироваться у Вас, в случае с провайдером такой необходимости нету, поэтому noauth

чешу в затылке, читаю опеннет... всё, понял... каряво на опеннете было написано...

25.05.2011 13:37 #164800

Fat-Zer написал:
всё есть в первом посте.

И хде?

Fat-Zer написал:
модем уже настроен

Когда модем настроен он работает, у Вас как я понимаю наоборот.Под линукс лучше Huawei брать, проблем с настройкой нет.

25.05.2011 13:48 #164804

Fat-Zer написал:
по вашей же ссылке написано, что модем этот не поддерживается.

И где написано что он не поддерживается usb_modeswitch. oO

В данном руководстве не используется usb_modeswitch, а, следовательно, не отключается кард-ридер.

25.05.2011 13:52 #164805

Fat-Zer написал:
вот это интересно... попробую, можно узнать откуда инфа?

http://habrahabr.ru/blogs/personal/96983/
Только нужно подгонять под свои реалии, у Вас, например, не /dev/ttyUSB1, а /dev/ttyACM0 (при передаче AT устройство должно быть не занято).
Я думаю, /dev/ttyACM0 именно для подключения к интернету, при этом какое-то из устройств от /dev/ttyACM1 до /dev/ttyACM3 (определятся методом научного тыка smile ) может принимать AT-команды даже, когда /dev/ttyACM0 занято. Это пригодится, если ppp0 уже поднят

25.05.2011 13:55 #164806

Gnom написал:
И хде?

под спойлерами.
lsusb - не интересно, вся нужная информация есть в /var/log/massages, ls /dev/ttyUSB* - это не к месту, ls /dev/ttyACM* - под первым спойлером.

Gnom написал:
Когда модем настроен он работает, у Вас как я понимаю наоборот.Под линукс лучше Huawei брать, проблем с настройкой нет.

работает, вполне нормально. проблем с настройкой тоже небыло, не считая того, что местами не понимал, что пишу... сейчас надо допилить немного(скорей всего удав мучить буду). + хочу избавится от мусора в логах.

25.05.2011 13:59 #164809

Gnom написал:
Под линукс лучше Huawei брать

Huawei e1550 у меня часто отваливался, помогала перезагрузка модулей, но при этом /dev/ttyUSB0 превращался в /dev/ttyUSB1 и, соответственно, приходилось менять устройство в настройках pppd. Еще с ним падало ядро, 2.6.36 - точно, дальше этим модемом уже не пользовался.

25.05.2011 14:00 #164810

Fat-Zer написал:
lsusb - не интересно,

Как раз интересно, посмотреть ID Vendor,Product

25.05.2011 14:02 #164813

Usr. Bin написал:
Huawei e1550 у меня часто отваливался, помогала перезагрузка модулей

Ни разу ни падал и не отваливался, настроенный через kppp. Сейчас Huawei E173 с прогой от мегафона работает, тоже ни разу не падал.

25.05.2011 14:15 · отредактировано #164814

Usr. Bin написал:
http://habrahabr.ru/blogs/personal/96983/
Только нужно подгонять под свои реалии, у Вас, например, не /dev/ttyUSB1, а /dev/ttyACM0 (при передаче AT устройство должно быть не занято).
Я думаю, /dev/ttyACM0 именно для подключения к интернету, при этом какое-то из устройств от /dev/ttyACM1 до /dev/ttyACM3 (определятся методом научного тыка ) может принимать AT-команды даже, когда /dev/ttyACM0 занято. Это пригодится, если ppp0 уже поднят

интересно, как он после этого будет вести себя на оффтопОС...

Gnom написал:
Как раз интересно, посмотреть ID Vendor,Product

ведь всё в логе под вторым спойлером есть...
до eject

Fat-Zer написал:
May 24 15:34:08 goblin-book kernel: [ 629.790325] usb 1-2: New USB device found, idVendor=19d2, idProduct=1216
May 24 15:34:08 goblin-book kernel: [ 629.790345] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3

посе eject

Fat-Zer написал:
May 24 15:34:30 goblin-book kernel: [ 652.029092] usb 1-2: New USB device found, idVendor=19d2, idProduct=1218
May 24 15:34:30 goblin-book kernel: [ 652.029111] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3

Gnom написал:
И где написано что он не поддерживается usb_modeswitch.

что же вы так невнимательно читаете...

Для использования в качестве usb-модема обычно предлагается
воспользоваться утилитой usb_modeswitch [1]http://www.lissyara.su/?id=2100
Данна программа, при запуске, должна в соотсветсвии с имеющимся правило
заменить значения VendorID и ProductID устройства (они указаны через
двоеточие в выводе команды lsusb -- см. выше). Однако, данная
модель модема не описана в конфигурационном файле программы, а
следовательно, мы не располагаем правилом для переключения устройства в режим
модема посредством указанной программы.

25.05.2011 16:04 #164843

Fat-Zer написал:
интересно, как он после этого будет вести себя на оффтопОС...

Если драйвера уже установлены, то Вам ничего не грозит. В любом случае всегда можно дать AT+ZCDRUN=9, или сбросить настройки (AT&F, вроде бы, точно не помню, уточняйте)

25.05.2011 18:32 · отредактировано #164911

Fat-Zer написал:
что же вы так невнимательно читаете...

Не внимательно, с мобилы полностью портянку в спойлере ой как не удобно читать.
Вот попробуй скачай вот этот архив это для ZTE MF100 ,может и под твой пойдет,разархивировать и запустить его
[console]./mf100 help[/console]
выдаст
[console]Использование:
./mf100.pl команда
например USSD команды (проверка, пополнение счета и другие):
./mf100.pl *111#, ./mf100.pl *код*код пополнения#, ...
Другие опции:
info различная информация о модеме
on включить модем
off выключить модем
modem переключиться в режим модема (отключается встроенный кардридер и автозагрузка встроенного CD-ROM диск)
storage отключить режим модема
cdstop отключить автозапуск встроенного диска (на нем ПО для windows)
cdrun включить автозапуск встроенного диска
sig мониторинг уровеня сигнала сети, для выхода Ctrl^C
search выбор режима поиска сети GSM/3G(WCDMA)
network сканировать сеть и вывести список доступных операторов связи
+ возможность ручного выбора оператора если есть доступны(й|е) для регистрации
pin ввести PIN (PUK) код
sequrity изменить, активировать/деактивировать PIN код.
help показать этот текст
[/console]
У меня с Huawei E1550 некоторые команды работали.
Не факт что с твоим модемом будет работать, но может быть.
PS. К сожалению не пойдет, в скрипте прописаны устройства /dev/ttyUSB0-2 ,если только попробовать их поменять на /dev/ttyACM0-3 , но это только методом "научного тыка".

26.05.2011 17:18 #165153

Gnom написал:
Вот попробуй скачай вот этот архив это для ZTE MF100 ,может и под твой пойдет,разархивировать и запустить его

Спасибо за наводку... подсмотрел там команды...
для общения с модемом (когда он работат) используется /dev/ttyACM1. команды слал minicom'ом правда отработали не все...

text


нормально отработали:
AT+CGMI
AT+CGMM - Модель
AT+CGMR - Версия ПО
AT+CGSN - IMEI, какая-то фигня
AT+CIMI - IEMS, тоже самое
AT+CSQ - уровень сигнала, в режиме 2G - нормально, 3G дома нет не тестил.
не помню, нормально или нет...
AT+CNUM - пишут, что это номер(телефонный видимо)
не отработали:
AT+ZDON? (не знаю нужны ли вопросы или нет... ненавижу перл...) - Оператор
AT+ZSNT? - Режим поиска сети
AT+COPS=?
AT+ZCDRUN=8 итп -переключение модемы в различные режимы - не прошли...
ЗЫ: как я понял команды не чувствительны к регистру...

утром добрым fsck повредил корень, потерял туеву хучу либ... вечером по-новой накачу - продолжу экспериментировать если будет настроение...

ЗЫ: вопрос по minicom'у в догонку: можно ли на ходу менять порт, бодрейт, в каком формате писать символы итп? и как?