Привязка к ядру ( баг )

server_name="GAME#1"  #Название сервера
screen_name="game"  #Название screen-сессии
use_user="root"  #Имя юзера от которого запускается сервер
path="/home/hlds/game"  #Путь до ROOT-директории сервера (без /в конце)
hlds_ip=""  #IP сервера ,не ставить 0.0.0.0
hlds_port=""  #Порт сервера
hlds_players="32"  #Максимальное количество игроков на сервере
hlds_map="oldstreet3"  #Имя первоначальной карты при запуске
hlds_options="-insecure +sys_ticrate 1200 -pingboost 2 -noipx"  #Дополнительные параметры запуска
priority="-20"  #Приоритет для сервера (-20 - Высокий ;20 - Низкий)
usecore="1"  #Привязка к ядрам (0, 1, 2, 3)
hlds_pid="${screen_name}.pid"  #Имя pid файла сервера
clear_logs="1"  # очишать лог файлы при запуске сервера через скрипт?
clear_cache="1"  # очишать кэши системы перед запуском сервера? # работает только под рутом
checker_cmd="/bin/qstat" #Команда пакета qStat отвечающего за проверку сервера
#####################################################
# End of configuration
#####################################################
if [ ! -x $path/hlds_run ]; then
    printf "${title}${txtred} Set permissions 777 for hlds_run\n"
    chmod -R 777 $path
fi
if [ $use_user == "root" ]; then
    start1=""
else
    start1="sudo -u ${use_user}"
fi
txtwht='\e[0;37m' # White
txtgrn='\e[0;32m' # Green
txtylw='\e[0;33m' # Yellow
txtred='\e[0;31m' # Red
title="${txtwht}[${txtgrn}${hlds_ip}:${hlds_port}${txtwht}]"
# check screen pid: ps -ef | grep SCREEN | grep ${screen_name} | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'
# check hlds pid: ps -ef | grep hlds_ | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'
start() {
    if [ "`ps -ef | grep SCREEN | grep $screen_name | grep $hlds_ip | grep $hlds_port | grep -v grep | wc -l`" -gt 0 ]; then
        if [ "`ps -ef | grep hlds_ | grep -v hlds_run | grep $hlds_ip | grep $hlds_port | grep -v grep | wc -l`" -gt 0 ]; then
            printf "${title} Server ${server_name} already started\n"
            exit 1
        fi
    fi
    cd ${path}
    if [ ${clear_logs} == 1 ]; then
        ${start1} rm -f ${path}/debug.log
        ${start1} rm -f ${path}/cstrike/qconsole.log
        ${start1} rm -fr ${path}/cstrike/logs/*.log
        ${start1} rm -fr ${path}/cstrike/addons/amxmodx/logs/*.log
        printf "${title} Server logs cleared\n"
    fi
    if [ ${clear_cache} == 1 ] && [ ${use_user} == "root" ]; then
        echo 3 > /proc/sys/vm/drop_caches
        printf "${title} Cache && buffers cleared\n"
    fi
    printf "${title} Starting ${server_name}\n"
    /usr/bin/screen -AmdS ${screen_name} ${start1} ./hlds_run -game cstrike +ip ${hlds_ip} +port ${hlds_port} +map ${hlds_map} +maxplayers ${hlds_players} ${hlds_options} -pidfile ${hlds_pid}
    sleep 3
    ${start1} taskset -pc ${usecore} `cat ${path}/${hlds_pid}` > /dev/null
    ${start1} renice -n ${priority} -p `cat ${path}/${hlds_pid}` > /dev/null
    if [ "`ps -ef | grep hlds_ | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`" = "`cat $path/$hlds_pid`" ]; then
        printf "${title} Server successfully started! :)\n"
    else
        printf "${title}${txtred} Server crashed on start :(\n"
    fi
}
kill_process() {
    if [ "`ps -ef | grep hlds_ | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | wc -l`" -gt 0 ]; then
        printf "${title} Kill: `ps -ef | grep SCREEN | grep ${screen_name} | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep`\n"
        ${start1} kill -9 "`ps -ef | grep SCREEN | grep ${screen_name} | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`"
        ${start1} rm -f ${path}/${hlds_pid}
    else
        printf "${title}${txtylw} Cannot kill hlds process of ${server_name} server\n"
    fi
}
stop() {
    if [ "`ps -ef | grep SCREEN | grep ${screen_name} | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}' | wc -l`" -eq 1 ]; then
        /usr/bin/screen -dr `ps -ef | grep SCREEN | grep ${screen_name} | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`.${screen_name} -p 0 -X eval "stuff "quit""
        /usr/bin/screen -dr `ps -ef | grep SCREEN | grep ${screen_name} | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`.${screen_name} -p 0 -X eval "stuff "$(printf \\r)""
        sleep 1
        ${start1} rm -rf ${path}/${hlds_pid}
        
        if [ "`ps -ef | grep hlds_ | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | wc -l`" -gt 0 ]; then
            printf "${title}${txtred} Server not stopped!\n"
        else
            printf "${title} Server has been stopped\n"
        fi
    else
        printf "${title}${txtylw} Cannot stop server ${server_name}, screen session not found!\n"
    fi
}
status() {
    printf "${title} Get status of server ${server_name}\n"
    ${start1} ${checker_cmd} -retry 3 -interval 2 -a2s ${hlds_ip}:${hlds_port} | grep ${hlds_ip}
    exit 1
}
console() {
    if [ "`ps -ef | grep SCREEN | grep ${screen_name} | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | wc -l`" -gt 0 ] && [ "`ps -ef | grep hlds_ | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`" = "`cat ${path}/${hlds_pid}`" ]; then
        printf "${title} Connecting to ${server_name} server console\n"
        printf "${title}${txtylw} For exit from console press Ctrl+A,D\n"
        printf "${title}${txtylw} Don't press Ctrl+C\n"
        sleep 1
        /usr/bin/screen -wipe > /dev/null
        /usr/bin/screen -dr `ps -ef | grep SCREEN | grep ${screen_name} | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`.${screen_name}
    else
        printf "${title}${txtred} Cannot connect to ${server_name} server console, server not started!\n"
    fi
}
checker() {
    time=`date +%X`
    date=`date +%D`
    
    if [ -f ${checker_cmd} ]; then
        if [ ! -x ${checker_cmd} ]; then
            printf "${title}${txtred} Check run privileges of ${checker_cmd}\n"
            exit 1
        fi
    else
        printf "${title}${txtred} Check qstat/quakestat binar\n"
    fi
    
    checknoresp=`${checker_cmd} -retry 5 -interval 2 -a2s ${hlds_ip}:${hlds_port} | grep response`
    if [ -n "${checknoresp}" ]; then
        printf "${title} ${server_name} server is: ${txtred}[NO RESPONSE]\n"
        printf "[${time} - ${date}] *[NO RESPONSE]* ${checknoresp}\n" >> $path/checker.log
        kill_process
        sleep 1
        start
        sleep 1
        printf "StartUP ${title}:" >> ${path}/checker.log
        if [ "`ps -ef | grep hlds_ | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`" = "`cat $path/$hlds_pid`" ]; then
            printf " *[OK]* \n" >> ${path}/checker.log
        else
            printf " *[FAILED]* \n" >> ${path}/checker.log
        fi
        exit 1
    fi
    
    checkdown=`${checker_cmd} -retry 5 -interval 2 -a2s ${hlds_ip}:${hlds_port} | grep DOWN`
    if [ -n "${checkdown}" ]; then
        printf "${title} ${server_name} server is: ${txtred}[DOWN]\n"
        printf "[{$time} - ${date}] *[DOWN]* ${checkdown}\n" >> ${path}/checker.log
        start
        sleep 1
        printf "StartUP ${title}:" >> ${path}/checker.log
        if [ "`ps -ef | grep hlds_ | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`" = "`cat $path/$hlds_pid`" ]; then
            printf " *[OK]* \n" >> ${path}/checker.log
        else
            printf " *[FAILED]* \n" >> ${path}/checker.log
        fi
        exit 1
    fi
    
    checkup=`${checker_cmd} -retry 5 -interval 2 -a2s ${hlds_ip}:${hlds_port} | grep cstrike`
    if [ -n "${checkup}" ]; then
        printf "${title} ${server_name} server is: ${txtgrn}[OK]\n"
        printf "[${time} - ${date}] *[OK]* ${checkup}\n" >> ${path}/checker.log
    fi
    if [ "`ps -e -o pid,cpuid,nice,cmd | grep hlds_ | grep -v SCREEN | grep -v grep | grep -v sh | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | awk '{print $3}'`" != ${priority} ]; then
        if [ "`ps -ef | grep hlds_ | grep -v hlds_run | grep ${hlds_ip} | grep ${hlds_port} | grep -v grep | awk '{print $2}'`" = "`cat $path/$hlds_pid`" ]; then
            printf "${title}${txtylw} ${server_name} server priority is changed because server is crashed\n"
            ${start1} taskset -pc ${usecore} "`cat ${path}/${hlds_pid}`" > /dev/null
            ${start1} renice -n ${priority} -p "`cat ${path}/${hlds_pid}`" > /dev/null
        else
            printf "${title}${txtylw} ${server_name} server priority cant be restore because not found pidfile!\n"
        fi
    else
        printf "${title} ${server_name} server priority is good!\n"
    fi
}
case "$1" in
    start)
        start
    ;;
    stop)
        stop
    ;;
    restart)
        stop
        kill_process
        sleep 2
        start
    ;;
    status)
        status
    ;;
    console)
        console
    ;;
    checker)
        checker
    ;;
    *)
    printf "${title} How to use: ${txtgrn}$0 {start|stop|restart|status|console|checker}${txtwht}\n"
    exit 1
esac