vb_ts3:~# cat /etc/udev/scripts/usb.sh
#! /bin/sh
#
# Mount Hotplug Device
#
. /etc/thinstation.env
. $TS_GLOBAL
# Run post scripts for appropriate action
run_scripts ()
{
scriptdir=/etc/hotplug/scripts
if [ -e $scriptdir/usb.$1 ] ; then
(echo "`ls $scriptdir/usb.$1`") |
while read script
do
$scriptdir/usb.$1/$script $devname
done
fi
}
devname=`basename $DEVNAME`
case $ACTION in
add)
if echo $devname | grep "/dev/sd$" > /dev/null ; then
echo_log "We don't mount $devname directly"
exit 0
fi
# add sync option to mount if set
if [ "`make_caps $USB_STORAGE_SYNC`" == "OFF" ] ; then
sync=""
else
sync="sync"
fi
# add any of the optional USB mount options if set
options=""
if [ -n $USB_MOUNT_OPTIONS ] ; then
options="$USB_MOUNT_OPTIONS"
fi
# use a defined mount point directory
mountdir="/mnt/usbdevice" # default
if [ -n "$USB_MOUNT_DIR" ] ; then
mountdir=$USB_MOUNT_DIR
fi
# create the usbdevice mount point if it doen't exist
if [ ! -e "$mountdir" ]; then
mkdir $mountdir
fi
# get the volume info (including file system type and label
blkid -o udev $DEVNAME > /tmp/volumeinfo
. /tmp/volumeinfo
rm /tmp/volumeinfo
# default the label to the device name
label=$devname
if [ -n "$USB_MOUNT_USELABEL" ] ;then
if [ "`make_caps $USB_MOUNT_USELABEL`" == "YES" ] ; then
# if the user has selected to use the volume label use it (if it exists)
if [ -n "$ID_FS_LABEL" ] ; then
label=$ID_FS_LABEL
fi
# if it has a value other than no, use it as the label if no volume label found
elif [ "`make_caps $USB_MOUNT_USELABEL`" != "NO" ] ; then
if [ -n "$ID_FS_LABEL" ] ; then
label=$ID_FS_LABEL
else
label=$USB_MOUNT_USELABEL
fi
fi
fi
mountpoint=$mountdir/$label
# cater for same labels etc., by adding a number suffix if it already exists
let x=0
testmountpoint=$mountpoint
while [ -e ${testmountpoint} ]
do
let x=x+1
testmountpoint=$mountpoint$x
done
if [ "$testmountpoint" != "$mountpoint" ] ; then
mountpoint=$testmountpoint
fi
mkdir $mountpoint
# use the found file system type for vfat & ntfs or if supermount is not loaded (supermount has issues with vfat & ntfs)
case $ID_FS_TYPE in
vfat|ntfs)
mount -t $ID_FS_TYPE -o $sync,codepage=866,iocharset=utf8 $DEVNAME $mountpoint
;;
*)
if check_module supermount ; then
mount -t supermount -o fs=auto,dev=$DEVNAME,--,$sync,codepage=866,iocharset=utf8 $mountpoint
else
# Without supermount we'll just see if the FSTYPE is correct
mount -t $ID_FS_TYPE -o $sync,codepage=866,iocharset=utf8 $DEVNAME $mountpoint
fi
;;
esac
ls -la $mountpoint
if [ ! -e ~/.hotplug/${devname} ] ; then
if [ ! -e ~/.hotplug ] ; then
mkdir ~/.hotplug
fi
touch ~/.hotplug/${devname}
fi
echo "HOTPLUGMOUNTPOINT=$mountpoint" > ~/.hotplug/${devname}
run_scripts $ACTION
;;
remove)
mountpoint="/mnt/usbdevice/${devname}"
if [ -e ~/.hotplug/${devname} ] ; then
. ~/.hotplug/${devname}
mountpoint=$HOTPLUGMOUNTPOINT
fi
if [ -e ${mountpoint} ] ; then
run_scripts $ACTION
umount ${mountpoint}
rmdir ${mountpoint}
fi
if [ -e ~/.hotplug/${devname} ] ; then
rm ~/.hotplug/${devname}
fi
;;
esac
exit 0
Я вместо переменной $options поставил iocharset=utf8,codepage=866. Не помогло ((
Когда скрипт отробатывает, то вот с такими параметрами
[console]/dev/sdb1 on /mnt/usbdevice/sdb1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)[/console]
Я если честно не знаю, может и не udev отвечает за флешку, хотя
[console]vb_ts3:~# ls -la /etc/udev/rules.d/
total 24
drwxr-xr-x 2 root root 0 Mar 23 09:03 .
drwxr-xr-x 4 root root 0 Mar 22 14:44 ..
-rw-rw-r-- 1 1000 1000 191 Mar 22 14:37 00-vmwgfx.rules
-rw-rw-r-- 1 1000 1000 392 Mar 22 14:37 50-modeset.rules
-rw-rw-r-- 1 1000 1000 93 Mar 22 14:37 51-firmware.rules
-rw-r--r-- 1 root root 1060 Mar 22 14:44 60-pcmcia.rules
-rw-r--r-- 1 root root 482 Mar 23 09:03 70-persistent-net.rules
-rw-rw-r-- 1 1000 1000 1218 Mar 22 14:37 99-udev.rule[/console]
[console]vb_ts3:~# cat /etc/udev/rules.d/99-udev.rules
# There are a number of modifiers that are allowed to be used in some of the
# fields. See the udev man page for a full description of them.
#
# See the udev.rules.examples file for more examples of how to create rules
#
# Note you must use the RUN option if trying to use actual device in script
KERNEL=="fd[0-9]*", SYMLINK=="floppy/%n", RUN+="/etc/udev/scripts/floppy.sh"
KERNEL=="lp[0-9]*", SYMLINK=="printers/%n"
#Usb Keys
#KERNEL=="sd*", ACTION=="add", SUBSYSTEM=="usb", RUN+="/etc/udev/scripts/usb.sh", OPTIONS="last_rule"
#KERNEL=="sd*", ACTION=="remove", RUN+="/etc/udev/scripts/usb.sh", OPTIONS="last_rule"
#Usb Cdrom
#KERNEL=="sr*", ACTION=="add", SUBSYSTEM=="usb", RUN+="/etc/udev/scripts/usbcd.sh"
#KERNEL=="sr*", ACTION=="remove", RUN+="/etc/udev/scripts/usbcd.sh"
#IDE Devices
ENV{DEVTYPE}=="partition", RUN+="/etc/udev/scripts/scsi.sh", OPTIONS="last_rule"
SUBSYSTEM=="block", ENV{ID_CDROM}=="1", ACTION=="add", RUN+="/bin/start-stop-daemon -S -x /bin/cddetect -p /var/run/cddetect -m -b &"
SUBSYSTEM=="block", ENV{ID_CDROM}=="1", ACTION=="change", RUN+="/etc/udev/scripts/scsi.sh", OPTIONS="last_rule"
SUBSYSTEM!="net", GOTO="net_end"
RUN+="/etc/udev/scripts/net.sh"
LABEL="net_end"
[/console]
