Grep 2nd line

[console]$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +29.5°C (high = +70.0°C)
(crit = +90.0°C, hyst = +88.0°C)

it8721-isa-0290
Adapter: ISA adapter
in0: +2.75 V (min = +1.90 V, max = +2.04 V) ALARM
in1: +2.78 V (min = +0.98 V, max = +2.93 V)
in2: +1.32 V (min = +0.79 V, max = +1.45 V)
+3.3V: +3.24 V (min = +0.02 V, max = +2.18 V) ALARM
in4: +1.44 V (min = +2.56 V, max = +2.09 V) ALARM
in5: +2.52 V (min = +0.18 V, max = +0.82 V) ALARM
in6: +1.01 V (min = +0.26 V, max = +1.99 V)
3VSB: +1.66 V (min = +0.82 V, max = +2.04 V)
Vbat: +3.41 V
fan1: 1049 RPM (min = 15 RPM)
fan2: 0 RPM (min = 32 RPM) ALARM
temp1: +36.0°C (low = -101.0°C, high = -55.0°C) sensor = thermistor
temp2: +32.0°C (low = -34.0°C, high = +26.0°C) sensor = thermistor
temp3: -128.0°C (low = +81.0°C, high = +51.0°C) sensor = disabled
intrusion0: OK
[/console]
Заковырка, у меня два совпадения:
[console]# sensors | grep "temp1" | cut -c16-19
29.5
36.0[/console]
Ну, да ладно грепну первое:
[console]# sensors | grep -m 1 'temp1' | cut -c16-22
29.5°C[/console]
А как второе??

Упс решил проще;
[console]# sensors | sed -n '3p' | cut -c16-22
29.5°C
# sensors | sed -n '19p' | cut -c16-22
36.0°C
[/console]
wink