text
[ 0.456056] usbcore: registered new device driver usb
[ 0.456056] ACPI: WMI: Mapper loaded
[ 0.456056] PCI: Using ACPI for IRQ routing
[ 0.456056] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.456056] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.456159] NetLabel: Initializing
[ 0.456160] NetLabel: domain hash size = 128
[ 0.456161] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.456168] NetLabel: unlabeled traffic allowed by default
[ 0.456198] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.456201] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.458224] Switching to clocksource tsc
[ 0.458822] AppArmor: AppArmor Filesystem Enabled
[ 0.458822] pnp: PnP ACPI init
[ 0.458822] ACPI: bus type pnp registered
[ 0.459369] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.459372] pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.459374] pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.459376] pnp 00:0d: mem resource (0x100000-0xcfefffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.459610] pnp: PnP ACPI: found 14 devices
[ 0.459611] ACPI: ACPI bus type pnp unregistered
[ 0.459612] PnPBIOS: Disabled by ACPI PNP
[ 0.459619] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.459621] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.459625] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.459627] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.459629] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.459630] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.459632] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.459633] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.459635] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.459637] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.459638] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.459640] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.459642] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.459643] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.459645] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.459647] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.459649] system 00:07: ioport range 0xb00-0xb3f has been reserved
[ 0.459650] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.459652] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.459654] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.459656] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.459658] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.459660] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.459662] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.459664] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.459668] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.459669] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.459671] system 00:0b: ioport range 0xf40-0xf4f has been reserved
[ 0.459672] system 00:0b: ioport range 0xa30-0xa3f has been reserved
[ 0.459675] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.459680] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.481976] Freeing initrd memory: 7738k freed
[ 0.494283] pci 0000:00:02.0: PCI bridge, secondary bus 0000:04
[ 0.494285] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.494287] pci 0000:00:02.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.494290] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.494293] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
[ 0.494295] pci 0000:00:06.0: IO window: 0xd000-0xdfff
[ 0.494297] pci 0000:00:06.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.494299] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.494302] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02
[ 0.494304] pci 0000:00:07.0: IO window: 0xc000-0xcfff
[ 0.494306] pci 0000:00:07.0: MEM window: 0xfbd00000-0xfbdfffff
[ 0.494308] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.494311] pci 0000:00:14.4: PCI bridge, secondary bus 0000:01
[ 0.494312] pci 0000:00:14.4: IO window: disabled
[ 0.494316] pci 0000:00:14.4: MEM window: disabled
[ 0.494319] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.494330] alloc irq_desc for 18 on node -1
[ 0.494331] alloc kstat_irqs on node -1
[ 0.494334] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.494337] pci 0000:00:02.0: setting latency timer to 64
[ 0.494341] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.494343] pci 0000:00:06.0: setting latency timer to 64
[ 0.494347] alloc irq_desc for 19 on node -1
[ 0.494348] alloc kstat_irqs on node -1
[ 0.494350] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.494352] pci 0000:00:07.0: setting latency timer to 64
[ 0.494359] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.494360] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.494362] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
[ 0.494364] pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.494365] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.494367] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.494368] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.494370] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.494371] pci_bus 0000:02: resource 1 mem: [0xfbd00000-0xfbdfffff]
[ 0.494373] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.494374] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.494396] NET: Registered protocol family 2
[ 0.494452] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.494636] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.494963] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.495124] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.495126] TCP reno registered
[ 0.495170] NET: Registered protocol family 1
[ 0.657102] pci 0000:04:00.0: Boot video device
[ 0.657299] cpufreq-nforce2: No nForce2 chipset.
[ 0.657313] Scanning for low memory corruption every 60 seconds
[ 0.657369] audit: initializing netlink socket (disabled)
[ 0.657374] type=2000 audit(1294142578.657:1): initialized
[ 0.662961] highmem bounce pool size: 64 pages
[ 0.662964] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.663765] VFS: Disk quotas dquot_6.5.2
[ 0.663798] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.664105] fuse init (API version 7.13)
[ 0.664150] msgmni has been set to 1636
[ 0.664320] alg: No test for stdrng (krng)
[ 0.664374] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.664376] io scheduler noop registered
[ 0.664377] io scheduler anticipatory registered
[ 0.664378] io scheduler deadline registered
[ 0.664401] io scheduler cfq registered (default)
[ 0.664482] alloc irq_desc for 25 on node -1
[ 0.664483] alloc kstat_irqs on node -1
[ 0.664488] pcieport 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.664492] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.664551] alloc irq_desc for 26 on node -1
[ 0.664552] alloc kstat_irqs on node -1
[ 0.664556] pcieport 0000:00:06.0: irq 26 for MSI/MSI-X
[ 0.664559] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.664614] alloc irq_desc for 27 on node -1
[ 0.664615] alloc kstat_irqs on node -1
[ 0.664619] pcieport 0000:00:07.0: irq 27 for MSI/MSI-X
[ 0.664622] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.664661] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.664675] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.664723] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.664729] ACPI: Power Button [PWRB]
[ 0.664755] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.664756] ACPI: Power Button [PWRF]
[ 0.665001] processor LNXCPU:00: registered as cooling_device0
[ 0.665031] processor LNXCPU:01: registered as cooling_device1
[ 0.665048] processor LNXCPU:02: registered as cooling_device2
[ 0.665066] processor LNXCPU:03: registered as cooling_device3
[ 0.666553] isapnp: Scanning for PnP cards...
[ 0.667249] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.667347] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.667578] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.668109] brd: module loaded
[ 0.668336] loop: module loaded
[ 0.668380] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.668464] alloc irq_desc for 16 on node -1
[ 0.668465] alloc kstat_irqs on node -1
[ 0.668469] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.668489] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.668654] Fixed MDIO Bus: probed
[ 0.668673] PPP generic driver version 2.4.2
[ 0.668688] tun: Universal TUN/TAP device driver, 1.6
[ 0.668689] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.668733] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.668745] alloc irq_desc for 17 on node -1
[ 0.668746] alloc kstat_irqs on node -1
[ 0.668748] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.668757] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.668773] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.668796] ehci_hcd 0000:00:12.2: debug port 1
[ 0.668813] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcfe800
[ 0.677090] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.677149] usb usb1: configuration #1 chosen from 1 choice
[ 0.677172] hub 1-0:1.0: USB hub found
[ 0.677177] hub 1-0:1.0: 6 ports detected
[ 0.677217] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.677227] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.677244] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.677265] ehci_hcd 0000:00:13.2: debug port 1
[ 0.677281] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcfec00
[ 0.689088] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.689142] usb usb2: configuration #1 chosen from 1 choice
[ 0.689159] hub 2-0:1.0: USB hub found
[ 0.689167] hub 2-0:1.0: 6 ports detected
[ 0.689204] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.689213] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.689223] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.689240] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.689258] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcf6000
[ 0.749114] usb usb3: configuration #1 chosen from 1 choice
[ 0.749128] hub 3-0:1.0: USB hub found
[ 0.749135] hub 3-0:1.0: 3 ports detected
[ 0.749168] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.749177] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.749195] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.749210] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcf7000
[ 0.809107] usb usb4: configuration #1 chosen from 1 choice
[ 0.809121] hub 4-0:1.0: USB hub found
[ 0.809128] hub 4-0:1.0: 3 ports detected
[ 0.809160] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.809170] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.809186] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.809208] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000
[ 0.869103] usb usb5: configuration #1 chosen from 1 choice
[ 0.869117] hub 5-0:1.0: USB hub found
[ 0.869123] hub 5-0:1.0: 3 ports detected
[ 0.869156] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.869164] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.869182] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 0.869198] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfd000
[ 0.929096] usb usb6: configuration #1 chosen from 1 choice
[ 0.929110] hub 6-0:1.0: USB hub found
[ 0.929116] hub 6-0:1.0: 3 ports detected
[ 0.929152] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.929162] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.929178] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 0.929197] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcff000
[ 0.989089] usb usb7: configuration #1 chosen from 1 choice
[ 0.989105] hub 7-0:1.0: USB hub found
[ 0.989112] hub 7-0:1.0: 2 ports detected
[ 0.989141] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.989177] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.989182] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.989198] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.989298] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.989340] mice: PS/2 mouse device common for all mice
[ 0.989397] rtc_cmos 00:02: RTC can wake from S4
[ 0.989415] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.989437] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.989492] device-mapper: uevent: version 1.0.3
[ 0.989576] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.989662] device-mapper: multipath: version 1.1.0 loaded
[ 0.989664] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.989734] EISA: Probing bus 0 at eisa.0
[ 0.989762] Cannot allocate resource for EISA slot 7
[ 0.989763] Cannot allocate resource for EISA slot 8
[ 0.989764] EISA: Detected 0 cards.
[ 0.989886] cpuidle: using governor ladder
[ 0.989887] cpuidle: using governor menu
[ 0.990121] TCP cubic registered
[ 0.990201] NET: Registered protocol family 10
[ 0.990461] lo: Disabled Privacy Extensions
[ 0.990642] NET: Registered protocol family 17
[ 0.990672] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor processors (4 cpu cores) (version 2.20.00)
[ 0.990696] powernow-k8: 0 : pstate 0 (3400 MHz)
[ 0.990697] powernow-k8: 1 : pstate 1 (2700 MHz)
[ 0.990698] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 0.990699] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.005291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.020479] isapnp: No Plug & Play device found
[ 1.020555] Using IPI No-Shortcut mode
[ 1.020599] PM: Resume from disk failed.
[ 1.020604] registered taskstats version 1
[ 1.020892] Magic number: 11:500:25
[ 1.020947] rtc_cmos 00:02: setting system clock to 2011-01-04 12:02:59 UTC (1294142579)
[ 1.020949] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.020950] EDD information not available.
[ 1.020981] Freeing unused kernel memory: 672k freed
[ 1.021169] Write protecting the kernel text: 4836k
[ 1.021212] Write protecting the kernel read-only data: 1884k
[ 1.030456] udev: starting version 151
[ 1.039866] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.039881] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.039915] r8169 0000:03:00.0: setting latency timer to 64
[ 1.039959] alloc irq_desc for 28 on node -1
[ 1.039960] alloc kstat_irqs on node -1
[ 1.039971] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[ 1.040339] eth0: RTL8168b/8111b at 0xf8230000, 00:26:18:80:85:32, XID 18000000 IRQ 28
[ 1.058701] ahci 0000:00:11.0: version 3.0
[ 1.058712] alloc irq_desc for 22 on node -1
[ 1.058714] alloc kstat_irqs on node -1
[ 1.058718] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.058893] alloc irq_desc for 29 on node -1
[ 1.058894] alloc kstat_irqs on node -1
[ 1.058903] ahci 0000:00:11.0: irq 29 for MSI/MSI-X
[ 1.058974] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.058977] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.061181] ohci1394 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.061187] ohci1394 0000:02:00.0: setting latency timer to 64
[ 1.062702] scsi0 : ahci
[ 1.066801] scsi1 : ahci
[ 1.066852] scsi2 : ahci
[ 1.066897] scsi3 : ahci
[ 1.066940] ata1: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe500 irq 29
[ 1.066943] ata2: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe580 irq 29
[ 1.066946] ata3: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe600 irq 29
[ 1.066949] ata4: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe680 irq 29
[ 1.067073] scsi4 : pata_atiixp
[ 1.067139] scsi5 : pata_atiixp
[ 1.067635] Floppy drive(s): fd0 is 1.44M
[ 1.068101] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.068103] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.071059] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbdff800-fbdfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.072921] FDC 0 is a post-1991 82077
[ 1.168491] ata5.00: ATAPI: Optiarc DVD RW AD-7200A, 1.09, max UDMA/66
[ 1.184156] usb 1-1: configuration #1 chosen from 1 choice
[ 1.184437] ata5.00: configured for UDMA/66
[ 1.188344] Initializing USB Mass Storage driver...
[ 1.188424] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.188485] usb-storage: device found at 2
[ 1.188486] usb-storage: waiting for device to settle before scanning
[ 1.188492] usbcore: registered new interface driver usb-storage
[ 1.188494] USB Mass Storage support registered.
[ 1.296029] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.380045] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.380067] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.380081] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.437083] usb 1-2: configuration #1 chosen from 1 choice
[ 1.437224] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1.437277] usb-storage: device found at 3
[ 1.437278] usb-storage: waiting for device to settle before scanning
[ 1.544022] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.545121] ata2.00: ATA-8: ST31000528AS, CC37, max UDMA/133
[ 1.545123] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.546401] ata2.00: configured for UDMA/133
[ 1.560114] scsi 1:0:0:0: Direct-Access ATA ST31000528AS CC37 PQ: 0 ANSI: 5
[ 1.560213] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.560220] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.560259] sd 1:0:0:0: [sda] Write Protect is off
[ 1.560261] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.560279] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.560404] sda:
[ 1.561962] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7200A 1.09 PQ: 0 ANSI: 5
[ 1.563878] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.563880] Uniform CD-ROM driver Revision: 3.20
[ 1.563933] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.563964] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.585204] sda1 sda2 sda3 <
[ 1.604014] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 1.607642] sda5 sda6 sda7 >
[ 1.626681] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.742855] usb 2-4: configuration #1 chosen from 1 choice
[ 1.743018] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1.743069] usb-storage: device found at 2
[ 1.743071] usb-storage: waiting for device to settle before scanning
[ 2.009019] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 2.138233] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.181038] usb 4-2: configuration #1 chosen from 1 choice
[ 2.341625] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001f9e64d]
[ 6.184229] usb-storage: device scan complete
[ 6.185956] scsi 6:0:0:0: Direct-Access JetFlash Transcend 4GB 8.01 PQ: 0 ANSI: 2
[ 6.186451] scsi 6:0:0:1: CD-ROM Generic Autorun Disk 8.00 PQ: 0 ANSI: 2
[ 6.186743] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.188813] sd 6:0:0:0: [sdb] 7843428 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 6.190454] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 tray
[ 6.190524] sr 6:0:0:1: Attached scsi CD-ROM sr1
[ 6.190550] sr 6:0:0:1: Attached scsi generic sg3 type 5
[ 6.190943] sd 6:0:0:0: [sdb] Write Protect is off
[ 6.190946] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6.190948] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.192943] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.192947] sdb:
[ 6.436295] usb-storage: device scan complete
[ 6.437269] scsi 7:0:0:0: Direct-Access QUMO USB FLASH DRIVE PMAP PQ: 0 ANSI: 0 CCS
[ 6.437532] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 6.438130] sd 7:0:0:0: [sdc] 15659008 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 6.438635] sd 7:0:0:0: [sdc] Write Protect is off
[ 6.438637] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 6.438639] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 6.440635] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 6.440637] sdc: sdc1
[ 6.442760] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 6.442762] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 6.522619] sdb1
[ 6.523865] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 6.523868] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.740192] usb-storage: device scan complete
[ 6.741169] scsi 8:0:0:0: Direct-Access Kingston DT 101 G2 PMAP PQ: 0 ANSI: 0 CCS
[ 6.741425] sd 8:0:0:0: Attached scsi generic sg5 type 0
[ 6.742418] sd 8:0:0:0: [sdd] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 6.742913] sd 8:0:0:0: [sdd] Write Protect is off
[ 6.742915] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 6.742916] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 6.745537] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 6.745539] sdd: sdd1
[ 6.748035] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 6.748037] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 9.557422] udev: starting version 151
[ 9.570664] Linux agpgart interface v0.103
[ 9.573139] lp: driver loaded but no devices found
[ 9.575145] vga16fb: initializing
[ 9.575147] vga16fb: mapped to 0xc00a0000
[ 9.575207] fb0: VGA16 VGA frame buffer device
[ 9.578460] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 9.578463] Disabling lock debugging due to kernel taint
[ 9.583196] Adding 4096532k swap on /dev/sda6. Priority:-1 extents:1 across:4096532k
[ 9.635373] type=1505 audit(1294131788.112:2): operation="profile_load" pid=725 name="/sbin/dhclient3"
[ 9.635545] type=1505 audit(1294131788.112:3): operation="profile_load" pid=725 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 9.635644] type=1505 audit(1294131788.112:4): operation="profile_load" pid=725 name="/usr/lib/connman/scripts/dhclient-script"
[ 9.690888] [fglrx] Maximum main memory to use for locked dma buffers: 3860 MBytes.
[ 9.691003] [fglrx] vendor: 1002 device: 9460 count: 1
[ 9.691174] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 9.691176] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.691226] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 9.691237] pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.691242] pci 0000:04:00.0: setting latency timer to 64
[ 9.691361] [fglrx] Kernel PAT support is enabled
[ 9.691374] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors
[ 9.741247] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.804739] hda_codec: ALC1200: BIOS auto-probing.
[ 9.806347] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
[ 9.807589] usbcore: registered new interface driver hiddev
[ 9.813374] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input5
[ 9.813478] generic-usb 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.1-2/input0
[ 9.813497] usbcore: registered new interface driver usbhid
[ 9.813498] usbhid: v2.6:USB HID core driver
[ 9.813927] HDA Intel 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.813948] HDA Intel 0000:04:00.1: setting latency timer to 64
[ 9.818885] Console: switching to colour frame buffer device 80x30
[ 10.290060] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 11.518729] type=1505 audit(1294131789.995:5): operation="profile_load" pid=1074 name="/usr/share/gdm/guest-session/Xsession"
[ 11.518912] type=1505 audit(1294131789.995:6): operation="profile_replace" pid=1075 name="/sbin/dhclient3"
[ 11.519091] type=1505 audit(1294131789.995:7): operation="profile_replace" pid=1075 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.519194] type=1505 audit(1294131789.995:8): operation="profile_replace" pid=1075 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.519430] type=1505 audit(1294131789.995:9): operation="profile_load" pid=1078 name="/usr/bin/freshclam"
[ 11.520306] type=1505 audit(1294131789.999:10): operation="profile_load" pid=1080 name="/usr/sbin/tcpdump"
[ 11.520361] type=1505 audit(1294131789.999:11): operation="profile_load" pid=1079 name="/usr/lib/cups/backend/cups-pdf"
[ 11.535261] r8169: eth0: link up
[ 11.535268] r8169: eth0: link up
[ 11.653030] vboxdrv: Found 4 processor cores.
[ 11.653109] vboxdrv: fAsync=0 offMin=0x56b offMax=0x1287
[ 11.653243] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 11.653245] vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000).
[ 11.893360] ppdev: user-space parallel port driver
[ 13.104740] alloc irq_desc for 30 on node -1
[ 13.104742] alloc kstat_irqs on node -1
[ 13.104751] fglrx_pci 0000:04:00.0: irq 30 for MSI/MSI-X
[ 13.105164] [fglrx] Firegl kernel thread PID: 1405
[ 13.105371] [fglrx] IRQ 30 Enabled
[ 13.951866] [fglrx] Gart USWC size:1256 M.
[ 13.951868] [fglrx] Gart cacheable size:498 M.
[ 13.951871] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 13.951873] [fglrx] Reserved FB block: Unshared offset:fc11000, size:3ef000
[ 13.951875] [fglrx] Reserved FB block: Unshared offset:7fffb000, size:5000
[ 16.721081] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 22.508006] eth0: no IPv6 routers present
[ 178.290760] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 178.295517] ISOFS: changing to secondary root
[ 179.073706] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 179.108683] ISOFS: changing to secondary root
[ 179.670945] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 226.456563] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 226.589873] usb 1-4: configuration #1 chosen from 1 choice
[ 564.094190] scsi 6:0:0:1: rejecting I/O to dead device
[ 576.304600] usb 1-2: USB disconnect, address 3
[ 578.631386] usb 1-1: USB disconnect, address 2
[ 589.168105] usb 2-4: USB disconnect, address 2
[ 1008.803990] RPC: Registered udp transport module.
[ 1008.803997] RPC: Registered tcp transport module.
[ 1008.804025] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2025.342452] usb 1-4: USB disconnect, address 5
[ 2643.204067] usb 1-4: new high speed USB device using ehci_hcd and address 6
[ 2643.338007] usb 1-4: configuration #1 chosen from 1 choice
vlad@vlad-desktop:~$
