Здравствуйте. Вот уже неделю не знаю, как решить головоломку. Поставил Ubuntu 10.04, не работает звук. Обновил ядро, звук заработал, перестал работать Wi-Fi и Bluetooth (я так понял драйвера отвалились). На старом ядре, работает и Wi-Fi и Bluetooth, но не работает звук. С 12.04 нет таких проблем, но там мне Unity не нравиться, а MATE не совсем работает так, как Gnome. Cейчас очередной раз поставил 10.04, но вот уже установить ядро не могу, т.е. могу, но работает с дефектами - при загрузке (с момента появления консоли/ splash screen и до экрана входа в систему) помехи на экране (такие, как на телевизоре бывают, монохромный шум такой). Вообщем помогите пожалуйста на Ubuntu 10.04 заставить работать и Wi-Fi, и звук, и Bluetooth. Ноутбук HP Compaq Presario CQ57-381SR. Спасибо.
LinuxForum.Fans
Проблемы со звуком, Wi-Fi и Bluetooth.
Автор: songmachine
15 сообщений
4495 просмотров
songmachine, не понятно, какие ядра вы использовали. Да и смысл сидеть на 10.04. А чем MATE не понравился? Попробуйте другие вариации на тему Ubuntu 12.04, 12.10:
Xubuntu
Kubuntu
Ubuntu + Cinnamon или Linux Mint Cinnamon
Ну например если запускаю браузер Google Chrome, то вместо панели с кнопками управления окном от браузера, используются от MATE, тем самым занимая место на экране. Также по 2 одинаковые программы в системы, с разным названиями. В принципе MATE не плох, но мне бы хотелось там видеть индикаторы (индикатор сеансов, выключения, сообщений и тд). Насколько я знаю, пакет, которые в 12.04 связанный с этими индикаторами, называется unity-2d-panel, но как использовать эту панель вместо той, что в MATE? Пробовал запустить этот пакет в терминале, но он появляется только при наведении стрелки в угол, да и то, убирает с панели меню и все значки. KDE, XFCE и даже 3-й Gnome не нравиться, интересен только Gnome 2.
Ядро установил от 12.04 - версия 3.2.
то вместо панели с кнопками управления окном от браузера, используются от MATE, тем самым занимая место на экране.
Правой кнопкой мыши на панели вкладок Chrome - убрать галку с "Использовать рамки и строку заголовка системы"
Также по 2 одинаковые программы в системы
Ставьте Mint 14 MATE.
Бывает такое что при установки автоматически не включается звук, нужно просто поставить галочку в настройках звука и передвинуть ползунок.
С ползунком все в порядке, звук работает только на более новом ядре (например 3.0 или 3.2). Mint с MATE ставил, не понравилось, половина окна нормально отображается, с той темой оформления, что поставил, а половина показывает тему по умолчанию, та что в MATE, если запускаю от root'a то окно полностью отображается с стандартной темой. Также русский не везде есть, например в Brasero, ну и тд. Пока склоняюсь к Ubuntu 10.04 с настоящим Gnome (как я уже писал, MATE - это не совсем то, что нужно), так, что получается буду мучится без Wi-Fi и Bluetooth, раз решений нет..
Установите в 10.04 свежее ядро со всеми зависимостями и покажите, dmesg, lspci -k.
Ядро я установил 3.2, а что с зависимостями? Не понял, что нужно сделать..
uname -a:
Показать
~$ uname -a
Linux songmachine-PC 3.2.0-030200-generic #201201042035 SMP Thu Jan 5 01:36:31 UTC 2012 x86_64 GNU/Linux
Linux songmachine-PC 3.2.0-030200-generic #201201042035 SMP Thu Jan 5 01:36:31 UTC 2012 x86_64 GNU/Linux
dmesg:
Показать
[ 0.352151] pnp 00:03: [io 0x0000-0x000f]
[ 0.352155] pnp 00:03: [io 0x0081-0x008f]
[ 0.352159] pnp 00:03: [io 0x00c0-0x00df]
[ 0.352163] pnp 00:03: [dma 4]
[ 0.352231] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.352253] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.352302] pnp 00:04: [irq 13]
[ 0.352368] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.352478] pnp 00:05: [io 0x0070-0x0071]
[ 0.352542] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.352562] pnp 00:06: [io 0x0061]
[ 0.352629] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.352657] pnp 00:07: [io 0x0010-0x001f]
[ 0.352661] pnp 00:07: [io 0x002e-0x002f]
[ 0.352664] pnp 00:07: [io 0x0072-0x0073]
[ 0.352667] pnp 00:07: [io 0x0080]
[ 0.352670] pnp 00:07: [io 0x00b0-0x00b1]
[ 0.352673] pnp 00:07: [io 0x0092]
[ 0.352677] pnp 00:07: [io 0x0400-0x04cf]
[ 0.352680] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.352683] pnp 00:07: [io 0x04d6]
[ 0.352686] pnp 00:07: [io 0x0680-0x06ff]
[ 0.352689] pnp 00:07: [io 0x077a]
[ 0.352692] pnp 00:07: [io 0x0c00-0x0c01]
[ 0.352695] pnp 00:07: [io 0x0c14]
[ 0.352698] pnp 00:07: [io 0x0c50-0x0c52]
[ 0.352701] pnp 00:07: [io 0x0c6c]
[ 0.352710] pnp 00:07: [io 0x0c6f]
[ 0.352714] pnp 00:07: [io 0x0cd0-0x0cdb]
[ 0.352835] system 00:07: [io 0x0400-0x04cf] has been reserved
[ 0.352841] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.352846] system 00:07: [io 0x04d6] has been reserved
[ 0.352851] system 00:07: [io 0x0680-0x06ff] has been reserved
[ 0.352856] system 00:07: [io 0x077a] has been reserved
[ 0.352861] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.352866] system 00:07: [io 0x0c14] has been reserved
[ 0.352871] system 00:07: [io 0x0c50-0x0c52] has been reserved
[ 0.352875] system 00:07: [io 0x0c6c] has been reserved
[ 0.352880] system 00:07: [io 0x0c6f] has been reserved
[ 0.352885] system 00:07: [io 0x0cd0-0x0cdb] has been reserved
[ 0.352892] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.352991] pnp 00:08: [mem 0x000e0000-0x000fffff]
[ 0.352996] pnp 00:08: [mem 0xffffffb0-0xfffffffe]
[ 0.352999] pnp 00:08: [mem 0xffffff00-0xfffffffe]
[ 0.353002] pnp 00:08: [mem 0xffe00000-0xffffffff]
[ 0.353112] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.353118] system 00:08: [mem 0xffffffb0-0xfffffffe] has been reserved
[ 0.353124] system 00:08: [mem 0xffffff00-0xfffffffe] could not be reserved
[ 0.353129] system 00:08: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.353137] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.369247] pnp 00:09: [io 0x0060]
[ 0.369254] pnp 00:09: [io 0x0064]
[ 0.369311] pnp 00:09: [irq 1]
[ 0.369453] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.369524] pnp 00:0a: [irq 12]
[ 0.369596] pnp 00:0a: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active)
[ 0.370458] pnp: PnP ACPI: found 11 devices
[ 0.370463] ACPI: ACPI bus type pnp unregistered
[ 0.385568] PCI: max bus depth: 1 pci_try_num: 2
[ 0.385660] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.385679] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[ 0.385686] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
[ 0.385696] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.385703] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.385713] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.385718] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 0.385729] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.385739] pci 0000:00:15.3: PCI bridge to [bus 07-07]
[ 0.385746] pci 0000:00:15.3: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.385801] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385809] pci 0000:00:15.0: setting latency timer to 64
[ 0.385820] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385827] pci 0000:00:15.1: setting latency timer to 64
[ 0.385838] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385845] pci 0000:00:15.3: setting latency timer to 64
[ 0.385852] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.385857] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.385861] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.385865] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.385869] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.385873] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.385877] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.385881] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.385885] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.385889] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.385893] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.385896] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.385900] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.385904] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.385908] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.385912] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.385916] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.385921] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.385925] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.385928] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.385932] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.385936] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.385940] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.385944] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.385948] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.385952] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.385956] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.385960] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.385964] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.385968] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.385972] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.385976] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.385980] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.385984] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.385988] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.385992] pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.385996] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.386000] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.386004] pci_bus 0000:06: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.386009] pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.386077] NET: Registered protocol family 2
[ 0.386365] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.389169] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.393789] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.394381] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.394387] TCP reno registered
[ 0.394419] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.394474] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.394666] NET: Registered protocol family 1
[ 0.394696] pci 0000:00:01.0: Boot video device
[ 1.092345] PCI: CLS 64 bytes, default 64
[ 1.092466] Trying to unpack rootfs image as initramfs...
[ 1.449496] Freeing initrd memory: 9244k freed
[ 1.454557] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.454567] Placing 64MB software IO TLB between ffff8800dbb3f000 - ffff8800dfb3f000
[ 1.454571] software IO TLB at phys 0xdbb3f000 - 0xdfb3f000
[ 1.454690] Simple Boot Flag at 0x44 set to 0x1
[ 1.455406] perf: AMD IBS detected (0x000000ff)
[ 1.455971] audit: initializing netlink socket (disabled)
[ 1.455995] type=2000 audit(1356694123.452:1): initialized
[ 1.505780] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.539773] VFS: Disk quotas dquot_6.5.2
[ 1.539886] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.541248] fuse init (API version 7.17)
[ 1.541680] msgmni has been set to 7104
[ 1.542715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.542860] io scheduler noop registered
[ 1.542866] io scheduler deadline registered
[ 1.542970] io scheduler cfq registered (default)
[ 1.543284] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.543369] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[ 1.543535] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.543605] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
[ 1.543719] pcieport 0000:00:15.3: setting latency timer to 64
[ 1.543791] pcieport 0000:00:15.3: irq 42 for MSI/MSI-X
[ 1.543956] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.543962] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.543969] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.544038] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.544044] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 1.544052] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.544091] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt
[ 1.544096] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 1.544103] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded
[ 1.544140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.544196] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.544350] efifb: probing for efifb
[ 1.544792] efifb: framebuffer at 0xe0204000, mapped to 0xffffc90005100000, using 2112k, total 2112k
[ 1.544797] efifb: mode is 1366x768x16, linelength=2752, pages=1
[ 1.544800] efifb: scrolling: redraw
[ 1.544804] efifb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.551163] Console: switching to colour frame buffer device 170x48
[ 1.555660] fb0: EFI VGA frame buffer device
[ 1.556526] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.557378] ACPI: AC Adapter [AC] (on-line)
[ 1.557698] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.559699] ACPI: Lid Switch [LID]
[ 1.559901] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.559911] ACPI: Power Button [PWRB]
[ 1.559992] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.559998] ACPI: Power Button [PWRF]
[ 1.560513] ACPI: acpi_idle registered with cpuidle
[ 1.583459] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.583465] ACPI: Thermal Zone [TSZ0] (46 C)
[ 1.583545] ERST: Table is not found!
[ 1.583549] GHES: HEST is not enabled!
[ 1.583686] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.625518] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.625535] ACPI: Battery Slot [BAT0] (battery present)
[ 1.677497] Linux agpgart interface v0.103
[ 1.682403] brd: module loaded
[ 1.684862] loop: module loaded
[ 1.685137] ahci 0000:00:11.0: version 3.0
[ 1.685246] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.685433] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.685441] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.686369] scsi0 : ahci
[ 1.686699] scsi1 : ahci
[ 1.687311] ata1: SATA max UDMA/133 abar m1024@0xf0449000 port 0xf0449100 irq 19
[ 1.687319] ata2: SATA max UDMA/133 abar m1024@0xf0449000 port 0xf0449180 irq 19
[ 1.688241] Fixed MDIO Bus: probed
[ 1.688282] tun: Universal TUN/TAP device driver, 1.6
[ 1.688285] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.688473] arcnet loaded.
[ 1.688478] PPP generic driver version 2.4.2
[ 1.688786] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.688879] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.688960] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.689094] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.689109] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.689140] QUIRK: Enable AMD PLL fix
[ 1.689158] ehci_hcd 0000:00:12.2: debug port 1
[ 1.689199] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0447000
[ 1.700288] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.700791] hub 1-0:1.0: USB hub found
[ 1.700804] hub 1-0:1.0: 5 ports detected
[ 1.701076] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.701155] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.701455] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 2
[ 1.701511] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.701556] ehci_hcd 0000:00:16.2: debug port 1
[ 1.701581] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0444000
[ 1.712286] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.712810] hub 2-0:1.0: USB hub found
[ 1.712823] hub 2-0:1.0: 4 ports detected
[ 1.713062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.713190] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.713272] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.713572] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.713675] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0448000
[ 1.772753] hub 3-0:1.0: USB hub found
[ 1.772837] hub 3-0:1.0: 5 ports detected
[ 1.773081] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.773160] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.773470] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 4
[ 1.773557] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0446000
[ 1.832766] hub 4-0:1.0: USB hub found
[ 1.832850] hub 4-0:1.0: 2 ports detected
[ 1.833092] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.833172] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.833466] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 5
[ 1.833554] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0445000
[ 1.892784] hub 5-0:1.0: USB hub found
[ 1.892868] hub 5-0:1.0: 4 ports detected
[ 1.893075] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.893221] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.900490] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.900502] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.900996] mousedev: PS/2 mouse device common for all mice
[ 1.901549] rtc_cmos 00:05: RTC can wake from S4
[ 1.901715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.901794] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.901944] device-mapper: uevent: version 1.0.3
[ 1.902161] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.902301] cpuidle: using governor ladder
[ 1.902451] cpuidle: using governor menu
[ 1.902455] EFI Variables Facility v0.08 2004-May-17
[ 1.902877] TCP cubic registered
[ 1.903108] NET: Registered protocol family 10
[ 1.903923] NET: Registered protocol family 17
[ 1.903992] Registering the dns_resolver key type
[ 1.904565] PM: Hibernation image not present or could not be loaded.
[ 1.904594] registered taskstats version 1
[ 1.921681] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.938241] Magic number: 8:234:480
[ 1.938391] rtc_cmos 00:05: setting system clock to 2012-12-28 11:28:44 UTC (1356694124)
[ 1.938405] powernow-k8: Found 1 AMD E-450 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[ 1.938470] powernow-k8: 0 : pstate 0 (1650 MHz)
[ 1.938474] powernow-k8: 1 : pstate 1 (1320 MHz)
[ 1.938477] powernow-k8: 2 : pstate 2 (825 MHz)
[ 1.938820] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.938825] EDD information not available.
[ 2.176308] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.176372] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.179436] ata2.00: ATAPI: hp DVD A DS8A8SH, KH61, max UDMA/100
[ 2.191194] ata2.00: configured for UDMA/100
[ 2.220302] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[ 2.244228] ata1.00: ATA-8: TOSHIBA MK8052GSX, LV010A, max UDMA/100
[ 2.244236] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.245517] ata1.00: configured for UDMA/100
[ 2.245775] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8052GS LV01 PQ: 0 ANSI: 5
[ 2.246156] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.246314] sd 0:0:0:0: [sda] Write Protect is off
[ 2.246320] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.246387] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.246780] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.258090] scsi 1:0:0:0: CD-ROM hp DVD A DS8A8SH KH61 PQ: 0 ANSI: 5
[ 2.279154] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.279162] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.279675] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.280106] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.352140] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 2.354429] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.357309] Freeing unused kernel memory: 912k freed
[ 2.357809] Write protecting the kernel read-only data: 12288k
[ 2.367920] Freeing unused kernel memory: 1692k freed
[ 2.376390] Freeing unused kernel memory: 1268k freed
[ 2.417344] udev: starting version 151
[ 2.417500] udevd (85): /proc/85/oom_adj is deprecated, please use /proc/85/oom_score_adj instead.
[ 2.452164] Refined TSC clocksource calibration: 1646.492 MHz.
[ 2.452175] Switching to clocksource tsc
[ 2.500153] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 2.547207] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.547306] r8169 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.547358] r8169 0000:06:00.0: setting latency timer to 64
[ 2.547433] r8169 0000:06:00.0: irq 43 for MSI/MSI-X
[ 2.569248] r8169 0000:06:00.0: eth0: RTL8105e at 0xffffc9000066e000, ec:9a:74:fd:57:88, XID 00a00000 IRQ 43
[ 2.574057] usbcore: registered new interface driver usbhid
[ 2.574063] usbhid: USB HID core driver
[ 2.614827] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4
[ 2.615150] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:12.0-2/input0
[ 2.840109] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 3.096385] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.747428] Adding 3905532k swap on /dev/sda7. Priority:-1 extents:1 across:3905532k
[ 4.781386] udev: starting version 151
[ 5.951168] type=1400 audit(1356694128.508:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=425 comm="apparmor_parser"
[ 5.951296] type=1400 audit(1356694128.508:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=425 comm="apparmor_parser"
[ 5.951387] type=1400 audit(1356694128.508:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=425 comm="apparmor_parser"
[ 5.965157] type=1400 audit(1356694128.524:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=357 comm="apparmor_parser"
[ 5.965285] type=1400 audit(1356694128.524:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=357 comm="apparmor_parser"
[ 5.965375] type=1400 audit(1356694128.524:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=357 comm="apparmor_parser"
[ 6.132501] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.165137] wmi: Mapper loaded
[ 6.284217] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.286550] Initializing Realtek PCIE storage driver...
[ 6.286707] rts_pstor 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.286816] Resource length: 0x1000
[ 6.286846] Original address: 0xf0300000, remapped address: 0xffffc90000678000
[ 6.286855] pci->irq = 20
[ 6.286859] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
[ 6.286965] rts_pstor 0000:02:00.0: setting latency timer to 64
[ 6.304288] bcma-pci-bridge 0000:07:00.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.304306] bcma-pci-bridge 0000:07:00.0: setting latency timer to 64
[ 6.304373] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 6.304406] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 6.304458] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 6.318298] acpi device:01: registered as cooling_device2
[ 6.318703] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 6.318889] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.338525] bcma: Bus registered
[ 6.488582] scsi2 : SCSI emulation for PCI-Express Mass Storage devices
[ 6.488999] rts_pstor: waiting for device to settle before scanning
[ 6.559401] Linux video capture interface: v2.00
[ 6.630631] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 6.644363] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 6.644379] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801007582d0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 6.644400] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880100758b18), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 6.645654] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 6.645669] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801007582d0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 6.645689] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880100758b18), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 6.727335] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 6.727504] SP5100 TCO timer: mmio address 0xb80430 already in use
[ 6.837116] lp: driver loaded but no devices found
[ 6.850412] uvcvideo: Found UVC 1.00 device HP Webcam-101 (058f:a001)
[ 6.853924] input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input7
[ 6.854231] usbcore: registered new interface driver uvcvideo
[ 6.854236] USB Video Class driver (1.1.1)
[ 7.088455] cfg80211: Calling CRDA to update world regulatory domain
[ 7.488510] rts_pstor: device scan complete
[ 7.488775] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 7.488894] Bad LUN (0:1)
[ 7.489053] Bad target number (1:0)
[ 7.489184] Bad target number (2:0)
[ 7.489302] Bad target number (3:0)
[ 7.489418] Bad target number (4:0)
[ 7.489721] Bad target number (5:0)
[ 7.489874] Bad target number (6:0)
[ 7.489990] Bad target number (7:0)
[ 7.491078] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 7.494804] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 7.852409] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 7.910978] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 8.135731] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[ 8.136670] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
[ 8.136729] b43: probe of bcma0:0 failed with error -95
[ 8.137179] Broadcom 43xx driver loaded [ Features: PNL ]
[ 8.256781] Disabling lock debugging due to kernel taint
[ 8.256817] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.275302] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.415410] [fglrx] Maximum main memory to use for locked dma buffers: 3401 MBytes.
[ 8.415591] [fglrx] vendor: 1002 device: 9806 count: 1
[ 8.416309] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 8.416336] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.416344] pci 0000:00:01.0: setting latency timer to 64
[ 8.416884] [fglrx] Kernel PAT support is enabled
[ 8.416925] [fglrx] module loaded - fglrx 9.0.2 [Sep 28 2012] with 1 minors
[ 8.464889] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 8.465440] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.099995] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.354079] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 9.704401] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 9.903021] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.670919] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 12.420617] type=1400 audit(1356694134.980:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=777 comm="apparmor_parser"
[ 12.435254] type=1400 audit(1356694134.992:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=778 comm="apparmor_parser"
[ 12.435399] type=1400 audit(1356694134.992:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=778 comm="apparmor_parser"
[ 12.435490] type=1400 audit(1356694134.992:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=778 comm="apparmor_parser"
[ 13.292245] type=1400 audit(1356694135.852:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=781 comm="apparmor_parser"
[ 13.292501] type=1400 audit(1356694135.852:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=781 comm="apparmor_parser"
[ 13.538150] type=1400 audit(1356694136.096:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=786 comm="apparmor_parser"
[ 13.863087] r8169 0000:06:00.0: eth0: link down
[ 13.863104] r8169 0000:06:00.0: eth0: link down
[ 13.864432] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.532702] r8169 0000:06:00.0: eth0: link up
[ 15.533526] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.036825] type=1400 audit(1356694142.993:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=780 comm="apparmor_parser"
[ 21.037780] type=1400 audit(1356694142.993:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=780 comm="apparmor_parser"
[ 21.038723] type=1400 audit(1356694142.993:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=780 comm="apparmor_parser"
[ 24.191125] ppdev: user-space parallel port driver
[ 25.600126] eth0: no IPv6 routers present
[ 28.526867] fglrx_pci 0000:00:01.0: irq 44 for MSI/MSI-X
[ 28.528125] [fglrx] Firegl kernel thread PID: 1087
[ 28.528330] [fglrx] Firegl kernel thread PID: 1088
[ 28.528646] [fglrx] Firegl kernel thread PID: 1089
[ 28.528831] [fglrx] IRQ 44 Enabled
[ 28.533017] [fglrx] Gart USWC size:1112 M.
[ 28.533022] [fglrx] Gart cacheable size:440 M.
[ 28.533031] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 28.533036] [fglrx] Reserved FB block: Unshared offset:fc84000, size:37c000
[ 28.533041] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 28.696053] [fglrx] ATIF platform detected with notification ID: 0x81
[ 0.352155] pnp 00:03: [io 0x0081-0x008f]
[ 0.352159] pnp 00:03: [io 0x00c0-0x00df]
[ 0.352163] pnp 00:03: [dma 4]
[ 0.352231] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.352253] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.352302] pnp 00:04: [irq 13]
[ 0.352368] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.352478] pnp 00:05: [io 0x0070-0x0071]
[ 0.352542] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.352562] pnp 00:06: [io 0x0061]
[ 0.352629] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.352657] pnp 00:07: [io 0x0010-0x001f]
[ 0.352661] pnp 00:07: [io 0x002e-0x002f]
[ 0.352664] pnp 00:07: [io 0x0072-0x0073]
[ 0.352667] pnp 00:07: [io 0x0080]
[ 0.352670] pnp 00:07: [io 0x00b0-0x00b1]
[ 0.352673] pnp 00:07: [io 0x0092]
[ 0.352677] pnp 00:07: [io 0x0400-0x04cf]
[ 0.352680] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.352683] pnp 00:07: [io 0x04d6]
[ 0.352686] pnp 00:07: [io 0x0680-0x06ff]
[ 0.352689] pnp 00:07: [io 0x077a]
[ 0.352692] pnp 00:07: [io 0x0c00-0x0c01]
[ 0.352695] pnp 00:07: [io 0x0c14]
[ 0.352698] pnp 00:07: [io 0x0c50-0x0c52]
[ 0.352701] pnp 00:07: [io 0x0c6c]
[ 0.352710] pnp 00:07: [io 0x0c6f]
[ 0.352714] pnp 00:07: [io 0x0cd0-0x0cdb]
[ 0.352835] system 00:07: [io 0x0400-0x04cf] has been reserved
[ 0.352841] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.352846] system 00:07: [io 0x04d6] has been reserved
[ 0.352851] system 00:07: [io 0x0680-0x06ff] has been reserved
[ 0.352856] system 00:07: [io 0x077a] has been reserved
[ 0.352861] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.352866] system 00:07: [io 0x0c14] has been reserved
[ 0.352871] system 00:07: [io 0x0c50-0x0c52] has been reserved
[ 0.352875] system 00:07: [io 0x0c6c] has been reserved
[ 0.352880] system 00:07: [io 0x0c6f] has been reserved
[ 0.352885] system 00:07: [io 0x0cd0-0x0cdb] has been reserved
[ 0.352892] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.352991] pnp 00:08: [mem 0x000e0000-0x000fffff]
[ 0.352996] pnp 00:08: [mem 0xffffffb0-0xfffffffe]
[ 0.352999] pnp 00:08: [mem 0xffffff00-0xfffffffe]
[ 0.353002] pnp 00:08: [mem 0xffe00000-0xffffffff]
[ 0.353112] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.353118] system 00:08: [mem 0xffffffb0-0xfffffffe] has been reserved
[ 0.353124] system 00:08: [mem 0xffffff00-0xfffffffe] could not be reserved
[ 0.353129] system 00:08: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.353137] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.369247] pnp 00:09: [io 0x0060]
[ 0.369254] pnp 00:09: [io 0x0064]
[ 0.369311] pnp 00:09: [irq 1]
[ 0.369453] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.369524] pnp 00:0a: [irq 12]
[ 0.369596] pnp 00:0a: Plug and Play ACPI device, IDs SYN1e4b SYN1e00 SYN0002 PNP0f13 (active)
[ 0.370458] pnp: PnP ACPI: found 11 devices
[ 0.370463] ACPI: ACPI bus type pnp unregistered
[ 0.385568] PCI: max bus depth: 1 pci_try_num: 2
[ 0.385660] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.385679] pci 0000:00:15.0: PCI bridge to [bus 02-05]
[ 0.385686] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff]
[ 0.385696] pci 0000:00:15.0: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.385703] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.385713] pci 0000:00:15.1: PCI bridge to [bus 06-06]
[ 0.385718] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 0.385729] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.385739] pci 0000:00:15.3: PCI bridge to [bus 07-07]
[ 0.385746] pci 0000:00:15.3: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.385801] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385809] pci 0000:00:15.0: setting latency timer to 64
[ 0.385820] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385827] pci 0000:00:15.1: setting latency timer to 64
[ 0.385838] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.385845] pci 0000:00:15.3: setting latency timer to 64
[ 0.385852] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.385857] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.385861] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.385865] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.385869] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.385873] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.385877] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.385881] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.385885] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.385889] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.385893] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.385896] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.385900] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.385904] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.385908] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.385912] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.385916] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.385921] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.385925] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.385928] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.385932] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.385936] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.385940] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.385944] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.385948] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.385952] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.385956] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.385960] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.385964] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.385968] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.385972] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.385976] pci_bus 0000:01: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.385980] pci_bus 0000:01: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.385984] pci_bus 0000:01: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.385988] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.385992] pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.385996] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.386000] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.386004] pci_bus 0000:06: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.386009] pci_bus 0000:07: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.386077] NET: Registered protocol family 2
[ 0.386365] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.389169] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.393789] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.394381] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.394387] TCP reno registered
[ 0.394419] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.394474] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.394666] NET: Registered protocol family 1
[ 0.394696] pci 0000:00:01.0: Boot video device
[ 1.092345] PCI: CLS 64 bytes, default 64
[ 1.092466] Trying to unpack rootfs image as initramfs...
[ 1.449496] Freeing initrd memory: 9244k freed
[ 1.454557] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.454567] Placing 64MB software IO TLB between ffff8800dbb3f000 - ffff8800dfb3f000
[ 1.454571] software IO TLB at phys 0xdbb3f000 - 0xdfb3f000
[ 1.454690] Simple Boot Flag at 0x44 set to 0x1
[ 1.455406] perf: AMD IBS detected (0x000000ff)
[ 1.455971] audit: initializing netlink socket (disabled)
[ 1.455995] type=2000 audit(1356694123.452:1): initialized
[ 1.505780] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.539773] VFS: Disk quotas dquot_6.5.2
[ 1.539886] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.541248] fuse init (API version 7.17)
[ 1.541680] msgmni has been set to 7104
[ 1.542715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.542860] io scheduler noop registered
[ 1.542866] io scheduler deadline registered
[ 1.542970] io scheduler cfq registered (default)
[ 1.543284] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.543369] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[ 1.543535] pcieport 0000:00:15.1: setting latency timer to 64
[ 1.543605] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
[ 1.543719] pcieport 0000:00:15.3: setting latency timer to 64
[ 1.543791] pcieport 0000:00:15.3: irq 42 for MSI/MSI-X
[ 1.543956] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.543962] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.543969] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.544038] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.544044] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 1.544052] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.544091] pcieport 0000:00:15.3: Signaling PME through PCIe PME interrupt
[ 1.544096] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 1.544103] pcie_pme 0000:00:15.3:pcie01: service driver pcie_pme loaded
[ 1.544140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.544196] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.544350] efifb: probing for efifb
[ 1.544792] efifb: framebuffer at 0xe0204000, mapped to 0xffffc90005100000, using 2112k, total 2112k
[ 1.544797] efifb: mode is 1366x768x16, linelength=2752, pages=1
[ 1.544800] efifb: scrolling: redraw
[ 1.544804] efifb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.551163] Console: switching to colour frame buffer device 170x48
[ 1.555660] fb0: EFI VGA frame buffer device
[ 1.556526] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.557378] ACPI: AC Adapter [AC] (on-line)
[ 1.557698] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.559699] ACPI: Lid Switch [LID]
[ 1.559901] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.559911] ACPI: Power Button [PWRB]
[ 1.559992] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.559998] ACPI: Power Button [PWRF]
[ 1.560513] ACPI: acpi_idle registered with cpuidle
[ 1.583459] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.583465] ACPI: Thermal Zone [TSZ0] (46 C)
[ 1.583545] ERST: Table is not found!
[ 1.583549] GHES: HEST is not enabled!
[ 1.583686] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.625518] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.625535] ACPI: Battery Slot [BAT0] (battery present)
[ 1.677497] Linux agpgart interface v0.103
[ 1.682403] brd: module loaded
[ 1.684862] loop: module loaded
[ 1.685137] ahci 0000:00:11.0: version 3.0
[ 1.685246] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.685433] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.685441] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.686369] scsi0 : ahci
[ 1.686699] scsi1 : ahci
[ 1.687311] ata1: SATA max UDMA/133 abar m1024@0xf0449000 port 0xf0449100 irq 19
[ 1.687319] ata2: SATA max UDMA/133 abar m1024@0xf0449000 port 0xf0449180 irq 19
[ 1.688241] Fixed MDIO Bus: probed
[ 1.688282] tun: Universal TUN/TAP device driver, 1.6
[ 1.688285] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.688473] arcnet loaded.
[ 1.688478] PPP generic driver version 2.4.2
[ 1.688786] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.688879] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.688960] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.689094] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.689109] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.689140] QUIRK: Enable AMD PLL fix
[ 1.689158] ehci_hcd 0000:00:12.2: debug port 1
[ 1.689199] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0447000
[ 1.700288] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.700791] hub 1-0:1.0: USB hub found
[ 1.700804] hub 1-0:1.0: 5 ports detected
[ 1.701076] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.701155] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.701455] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 2
[ 1.701511] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.701556] ehci_hcd 0000:00:16.2: debug port 1
[ 1.701581] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0444000
[ 1.712286] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.712810] hub 2-0:1.0: USB hub found
[ 1.712823] hub 2-0:1.0: 4 ports detected
[ 1.713062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.713190] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.713272] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.713572] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.713675] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0448000
[ 1.772753] hub 3-0:1.0: USB hub found
[ 1.772837] hub 3-0:1.0: 5 ports detected
[ 1.773081] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.773160] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.773470] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 4
[ 1.773557] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0446000
[ 1.832766] hub 4-0:1.0: USB hub found
[ 1.832850] hub 4-0:1.0: 2 ports detected
[ 1.833092] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.833172] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.833466] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 5
[ 1.833554] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0445000
[ 1.892784] hub 5-0:1.0: USB hub found
[ 1.892868] hub 5-0:1.0: 4 ports detected
[ 1.893075] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.893221] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.900490] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.900502] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.900996] mousedev: PS/2 mouse device common for all mice
[ 1.901549] rtc_cmos 00:05: RTC can wake from S4
[ 1.901715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.901794] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.901944] device-mapper: uevent: version 1.0.3
[ 1.902161] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.902301] cpuidle: using governor ladder
[ 1.902451] cpuidle: using governor menu
[ 1.902455] EFI Variables Facility v0.08 2004-May-17
[ 1.902877] TCP cubic registered
[ 1.903108] NET: Registered protocol family 10
[ 1.903923] NET: Registered protocol family 17
[ 1.903992] Registering the dns_resolver key type
[ 1.904565] PM: Hibernation image not present or could not be loaded.
[ 1.904594] registered taskstats version 1
[ 1.921681] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.938241] Magic number: 8:234:480
[ 1.938391] rtc_cmos 00:05: setting system clock to 2012-12-28 11:28:44 UTC (1356694124)
[ 1.938405] powernow-k8: Found 1 AMD E-450 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
[ 1.938470] powernow-k8: 0 : pstate 0 (1650 MHz)
[ 1.938474] powernow-k8: 1 : pstate 1 (1320 MHz)
[ 1.938477] powernow-k8: 2 : pstate 2 (825 MHz)
[ 1.938820] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.938825] EDD information not available.
[ 2.176308] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.176372] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.179436] ata2.00: ATAPI: hp DVD A DS8A8SH, KH61, max UDMA/100
[ 2.191194] ata2.00: configured for UDMA/100
[ 2.220302] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[ 2.244228] ata1.00: ATA-8: TOSHIBA MK8052GSX, LV010A, max UDMA/100
[ 2.244236] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.245517] ata1.00: configured for UDMA/100
[ 2.245775] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8052GS LV01 PQ: 0 ANSI: 5
[ 2.246156] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.246314] sd 0:0:0:0: [sda] Write Protect is off
[ 2.246320] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.246387] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.246780] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.258090] scsi 1:0:0:0: CD-ROM hp DVD A DS8A8SH KH61 PQ: 0 ANSI: 5
[ 2.279154] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.279162] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.279675] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.280106] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.352140] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 2.354429] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.357309] Freeing unused kernel memory: 912k freed
[ 2.357809] Write protecting the kernel read-only data: 12288k
[ 2.367920] Freeing unused kernel memory: 1692k freed
[ 2.376390] Freeing unused kernel memory: 1268k freed
[ 2.417344] udev: starting version 151
[ 2.417500] udevd (85): /proc/85/oom_adj is deprecated, please use /proc/85/oom_score_adj instead.
[ 2.452164] Refined TSC clocksource calibration: 1646.492 MHz.
[ 2.452175] Switching to clocksource tsc
[ 2.500153] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 2.547207] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.547306] r8169 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.547358] r8169 0000:06:00.0: setting latency timer to 64
[ 2.547433] r8169 0000:06:00.0: irq 43 for MSI/MSI-X
[ 2.569248] r8169 0000:06:00.0: eth0: RTL8105e at 0xffffc9000066e000, ec:9a:74:fd:57:88, XID 00a00000 IRQ 43
[ 2.574057] usbcore: registered new interface driver usbhid
[ 2.574063] usbhid: USB HID core driver
[ 2.614827] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4
[ 2.615150] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:12.0-2/input0
[ 2.840109] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 3.096385] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.747428] Adding 3905532k swap on /dev/sda7. Priority:-1 extents:1 across:3905532k
[ 4.781386] udev: starting version 151
[ 5.951168] type=1400 audit(1356694128.508:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=425 comm="apparmor_parser"
[ 5.951296] type=1400 audit(1356694128.508:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=425 comm="apparmor_parser"
[ 5.951387] type=1400 audit(1356694128.508:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=425 comm="apparmor_parser"
[ 5.965157] type=1400 audit(1356694128.524:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=357 comm="apparmor_parser"
[ 5.965285] type=1400 audit(1356694128.524:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=357 comm="apparmor_parser"
[ 5.965375] type=1400 audit(1356694128.524:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=357 comm="apparmor_parser"
[ 6.132501] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.165137] wmi: Mapper loaded
[ 6.284217] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.286550] Initializing Realtek PCIE storage driver...
[ 6.286707] rts_pstor 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.286816] Resource length: 0x1000
[ 6.286846] Original address: 0xf0300000, remapped address: 0xffffc90000678000
[ 6.286855] pci->irq = 20
[ 6.286859] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
[ 6.286965] rts_pstor 0000:02:00.0: setting latency timer to 64
[ 6.304288] bcma-pci-bridge 0000:07:00.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.304306] bcma-pci-bridge 0000:07:00.0: setting latency timer to 64
[ 6.304373] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 6.304406] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 6.304458] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 6.318298] acpi device:01: registered as cooling_device2
[ 6.318703] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 6.318889] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.338525] bcma: Bus registered
[ 6.488582] scsi2 : SCSI emulation for PCI-Express Mass Storage devices
[ 6.488999] rts_pstor: waiting for device to settle before scanning
[ 6.559401] Linux video capture interface: v2.00
[ 6.630631] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 6.644363] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 6.644379] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801007582d0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 6.644400] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880100758b18), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 6.645654] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
[ 6.645669] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801007582d0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 6.645689] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880100758b18), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 6.727335] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 6.727504] SP5100 TCO timer: mmio address 0xb80430 already in use
[ 6.837116] lp: driver loaded but no devices found
[ 6.850412] uvcvideo: Found UVC 1.00 device HP Webcam-101 (058f:a001)
[ 6.853924] input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input7
[ 6.854231] usbcore: registered new interface driver uvcvideo
[ 6.854236] USB Video Class driver (1.1.1)
[ 7.088455] cfg80211: Calling CRDA to update world regulatory domain
[ 7.488510] rts_pstor: device scan complete
[ 7.488775] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 7.488894] Bad LUN (0:1)
[ 7.489053] Bad target number (1:0)
[ 7.489184] Bad target number (2:0)
[ 7.489302] Bad target number (3:0)
[ 7.489418] Bad target number (4:0)
[ 7.489721] Bad target number (5:0)
[ 7.489874] Bad target number (6:0)
[ 7.489990] Bad target number (7:0)
[ 7.491078] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 7.494804] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 7.852409] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 7.910978] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 8.135731] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[ 8.136670] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
[ 8.136729] b43: probe of bcma0:0 failed with error -95
[ 8.137179] Broadcom 43xx driver loaded [ Features: PNL ]
[ 8.256781] Disabling lock debugging due to kernel taint
[ 8.256817] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.275302] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.415410] [fglrx] Maximum main memory to use for locked dma buffers: 3401 MBytes.
[ 8.415591] [fglrx] vendor: 1002 device: 9806 count: 1
[ 8.416309] [fglrx] ioport: bar 1, base 0x4000, size: 0x100
[ 8.416336] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.416344] pci 0000:00:01.0: setting latency timer to 64
[ 8.416884] [fglrx] Kernel PAT support is enabled
[ 8.416925] [fglrx] module loaded - fglrx 9.0.2 [Sep 28 2012] with 1 minors
[ 8.464889] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 8.465440] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.099995] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.354079] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 9.704401] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 9.903021] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.670919] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 12.420617] type=1400 audit(1356694134.980:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=777 comm="apparmor_parser"
[ 12.435254] type=1400 audit(1356694134.992:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=778 comm="apparmor_parser"
[ 12.435399] type=1400 audit(1356694134.992:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=778 comm="apparmor_parser"
[ 12.435490] type=1400 audit(1356694134.992:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=778 comm="apparmor_parser"
[ 13.292245] type=1400 audit(1356694135.852:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=781 comm="apparmor_parser"
[ 13.292501] type=1400 audit(1356694135.852:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=781 comm="apparmor_parser"
[ 13.538150] type=1400 audit(1356694136.096:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=786 comm="apparmor_parser"
[ 13.863087] r8169 0000:06:00.0: eth0: link down
[ 13.863104] r8169 0000:06:00.0: eth0: link down
[ 13.864432] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.532702] r8169 0000:06:00.0: eth0: link up
[ 15.533526] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.036825] type=1400 audit(1356694142.993:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=780 comm="apparmor_parser"
[ 21.037780] type=1400 audit(1356694142.993:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=780 comm="apparmor_parser"
[ 21.038723] type=1400 audit(1356694142.993:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=780 comm="apparmor_parser"
[ 24.191125] ppdev: user-space parallel port driver
[ 25.600126] eth0: no IPv6 routers present
[ 28.526867] fglrx_pci 0000:00:01.0: irq 44 for MSI/MSI-X
[ 28.528125] [fglrx] Firegl kernel thread PID: 1087
[ 28.528330] [fglrx] Firegl kernel thread PID: 1088
[ 28.528646] [fglrx] Firegl kernel thread PID: 1089
[ 28.528831] [fglrx] IRQ 44 Enabled
[ 28.533017] [fglrx] Gart USWC size:1112 M.
[ 28.533022] [fglrx] Gart cacheable size:440 M.
[ 28.533031] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 28.533036] [fglrx] Reserved FB block: Unshared offset:fc84000, size:37c000
[ 28.533041] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 28.696053] [fglrx] ATIF platform detected with notification ID: 0x81
lspci -k:
Показать
~$ lspci -k
00:00.0 Host bridge: Advanced Micro Devices [AMD] Device 1510
00:01.0 VGA compatible controller: ATI Technologies Inc Device 9806
Kernel driver in use: fglrx_pci
Kernel modules: fglrx, radeon
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
Kernel driver in use: ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Kernel driver in use: ohci_hcd
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
Kernel driver in use: piix4_smbus
Kernel modules: sp5100_tco, i2c-piix4
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge: ATI Technologies Inc Device 43a0
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.1 PCI bridge: ATI Technologies Inc Device 43a1
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.3 PCI bridge: ATI Technologies Inc Device 43a3
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Kernel driver in use: ohci_hcd
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Kernel driver in use: ehci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Device 1700 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Device 1701
00:18.2 Host bridge: Advanced Micro Devices [AMD] Device 1702
00:18.3 Host bridge: Advanced Micro Devices [AMD] Device 1703
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Device 1704
00:18.5 Host bridge: Advanced Micro Devices [AMD] Device 1718
00:18.6 Host bridge: Advanced Micro Devices [AMD] Device 1716
00:18.7 Host bridge: Advanced Micro Devices [AMD] Device 1719
02:00.0 Class ff00: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
Kernel driver in use: rts_pstor
Kernel modules: rts_pstor
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Kernel driver in use: r8169
Kernel modules: r8169
07:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01)
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
00:00.0 Host bridge: Advanced Micro Devices [AMD] Device 1510
00:01.0 VGA compatible controller: ATI Technologies Inc Device 9806
Kernel driver in use: fglrx_pci
Kernel modules: fglrx, radeon
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
Kernel driver in use: ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Kernel driver in use: ohci_hcd
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Kernel driver in use: ehci_hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
Kernel driver in use: piix4_smbus
Kernel modules: sp5100_tco, i2c-piix4
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
Kernel driver in use: ohci_hcd
00:15.0 PCI bridge: ATI Technologies Inc Device 43a0
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.1 PCI bridge: ATI Technologies Inc Device 43a1
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.3 PCI bridge: ATI Technologies Inc Device 43a3
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
Kernel driver in use: ohci_hcd
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
Kernel driver in use: ehci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Device 1700 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Device 1701
00:18.2 Host bridge: Advanced Micro Devices [AMD] Device 1702
00:18.3 Host bridge: Advanced Micro Devices [AMD] Device 1703
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Device 1704
00:18.5 Host bridge: Advanced Micro Devices [AMD] Device 1718
00:18.6 Host bridge: Advanced Micro Devices [AMD] Device 1716
00:18.7 Host bridge: Advanced Micro Devices [AMD] Device 1719
02:00.0 Class ff00: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
Kernel driver in use: rts_pstor
Kernel modules: rts_pstor
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
Kernel driver in use: r8169
Kernel modules: r8169
07:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01)
Kernel driver in use: bcma-pci-bridge
Kernel modules: bcma
С точки зрения ядра, проблем вроде бы нет. А что у вас с правами на аудиоустройство?
text
ls -l /dev/snd
idUPD: стоп, а у вас с этим ядром проблемы с Wi-Fi и Bluetooth, но не со звуком, так?
Тогда нужно обновлять еще и kernel-firmwares - прошивки для устройств.
С ядром 2.6 (установилось вместе с ОС) не работает звук, Wi-Fi и Bluetooth работает. С ядром 3.2 звук работает, не работает Wi-Fi и Bluetooth.
Тогда нужно обновлять еще и kernel-firmwares - прошивки для устройств.
Как это сделать? Мне вообще все равно, какое ядро стоит, главное, чтобы все устройства работали.
P.S.> Не знаю еще, как там обстоят дела с кардридером...
покажите
sudo dpkg -l | grep kernel
Показать
~$ sudo dpkg -l | grep kernel
ii kerneloops-daemon 0.12+git20090217-1ubuntu7 kernel oops tracker
ii libdrm-intel1 2.4.18-1ubuntu3 Userspace interface to intel-specific kernel
ii libdrm2 2.4.18-1ubuntu3 Userspace interface to kernel DRM services -
ii linux-firmware 1.34.14 Firmware for Linux kernel drivers
ii linux-generic 2.6.32.45.52 Complete Generic Linux kernel
ii linux-headers-2.6.32-45 2.6.32-45.101 Header files related to Linux kernel version
ii linux-headers-2.6.32-45-generic 2.6.32-45.101 Linux kernel headers for version 2.6.32 on x
ii linux-headers-3.2.0-030200 3.2.0-030200.201201042035 Header files related to Linux kernel version
ii linux-headers-3.2.0-030200-generic 3.2.0-030200.201201042035 Linux kernel headers for version 3.2.0 on x8
ii linux-headers-generic 2.6.32.45.52 Generic Linux kernel headers
ii linux-image-2.6.32-38-generic 2.6.32-38.85 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-45-generic 2.6.32-45.101 Linux kernel image for version 2.6.32 on x86
ii linux-image-3.2.0-030200-generic 3.2.0-030200.201201042035 Linux kernel image for version 3.2.0 on x86/
ii linux-image-generic 2.6.32.45.52 Generic Linux kernel image
ii module-init-tools 3.11.1-2ubuntu1 tools for managing Linux kernel modules
ii udev 151-12.3 rule-based device node and kernel event mana
ii kerneloops-daemon 0.12+git20090217-1ubuntu7 kernel oops tracker
ii libdrm-intel1 2.4.18-1ubuntu3 Userspace interface to intel-specific kernel
ii libdrm2 2.4.18-1ubuntu3 Userspace interface to kernel DRM services -
ii linux-firmware 1.34.14 Firmware for Linux kernel drivers
ii linux-generic 2.6.32.45.52 Complete Generic Linux kernel
ii linux-headers-2.6.32-45 2.6.32-45.101 Header files related to Linux kernel version
ii linux-headers-2.6.32-45-generic 2.6.32-45.101 Linux kernel headers for version 2.6.32 on x
ii linux-headers-3.2.0-030200 3.2.0-030200.201201042035 Header files related to Linux kernel version
ii linux-headers-3.2.0-030200-generic 3.2.0-030200.201201042035 Linux kernel headers for version 3.2.0 on x8
ii linux-headers-generic 2.6.32.45.52 Generic Linux kernel headers
ii linux-image-2.6.32-38-generic 2.6.32-38.85 Linux kernel image for version 2.6.32 on x86
ii linux-image-2.6.32-45-generic 2.6.32-45.101 Linux kernel image for version 2.6.32 on x86
ii linux-image-3.2.0-030200-generic 3.2.0-030200.201201042035 Linux kernel image for version 3.2.0 on x86/
ii linux-image-generic 2.6.32.45.52 Generic Linux kernel image
ii module-init-tools 3.11.1-2ubuntu1 tools for managing Linux kernel modules
ii udev 151-12.3 rule-based device node and kernel event mana
Вам нужно обновлять linux-firmware до той версии, что идет в 12.04*, т.е. 1.11 *SCRATCH*
* http://packages.ubuntu.com/precise/kernel/
Значит мне нужно скачать оттуда пакет linux-firmware-nonfree и установить его, верно?
Значит мне нужно скачать оттуда пакет linux-firmware-nonfree и установить его, верно?
Попробуйте, но меня смущает версия - с последним обновлением в 10.04 пришла более свежая версия, как я понимаю. Как вариант, можно попробовать взять не ядро 3.2, а, скажем, из ветки 3.0 (придется собрать, наверное). Возможно, найдется в готовых ядрах такое, которое "из коробки" будет знать все ваше железо. А не найдется - придется собирать.
А со старым ядром какая ситуация?
text
sudo dmesg
sudo lspci -kВойдите или зарегистрируйтесь, чтобы ответить.
