Привет, поставил линукс все отлично но вот столкнулся с траблой тв тюнера, юзал поиск нечего не нашел по этому начну тут...
AverTV Hybrid+FM pci больше названия не знаю, с диска списал, ибо lspci не выдает что то похожее с ним (если надо выложу список что пишут lspci)
В поиске нашел название проги TVtime поставил но синий экран и надпись No such file or directory - Cannot open capture device /dev/video0 и нечего не не меняеться
Прошу плз помогите определить находиться ли он ваще в системе? через какую лучше программу смотреть? что установить что бы находился?
з.ы перешел с виндовс програм еще толком не знаю...
LinuxForum.Fans
[Решено] AverTV Hybrid+FM PCI
Автор: MrFelix
41 сообщений
15773 просмотров
Надо ставить драйвер с официального сайта.
http://www.avermedia.com/avertv/Support/Download.aspx?Action=search&Kind=APDriver&interface=ALL&signal=3&keyword=linux
Надо ставить драйвер с официального сайта.
http://www.avermedia.com/avertv/Support/Download.aspx?Action=search&Kind=APDriver&interface=ALL&signal=3&keyword=linux
а точнее? у меня ubuntu 9.10 а как там вижу для ubuntu тока AverTV hybrid+FM Volar ... или никакой разницы?
Разница есть - те для USB.
http://forum.avertv.ru/index.php?showtopic=8732
Пишут есть в ядре поддержка.
Какой компьютер? - если есть видеокамера - она определяется первой.тогда в тв тиме вызывать tvtime /dev/video1
Разница есть - те для USB.
http://forum.avertv.ru/index.php?showtopic=8732
Пишут есть в ядре поддержка.
Какой компьютер? - если есть видеокамера - она определяется первой.тогда в тв тиме вызывать tvtime /dev/video1
в смысле какой компьютер?
Видеокамеры нет.
как я понял писать в терминале tvtime /dev/video1 , тупо запускаеться tvtime и снизу пишеться тоже самое про /dev/video0 , нечего не меняеться
прочитал тотуриал скачал поставил там прошивку все равно 0 эмоций
MrFelix, давайте все-таки спросим.
1) как ваш тюнер подключен?
2) если по USB, то lsusb, иначе lspci
MrFelix, давайте все-таки спросим.
1) как ваш тюнер подключен?
2) если по USB, то lsusb, иначе lspci
в первом посту написана версия тюнера, там и указано что pci , если хочешь я вставлю сюда lspci т.к я там не нахожу своего тюнера ваще оО
MrFelix, давай посмотрим :)
Заодно, uname -a
Все из под рута.
Точнее, у вас через sudo
lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a2)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a2)
00:0a.2 RAM memory: nVidia Corporation MCP51 Memory Controller 0 (rev a2)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a2)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.2 Multimedia audio controller: nVidia Corporation MCP51 AC97 Audio Controller (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600 GT] (rev a1)
04:08.0 Network controller: RaLink RT2561/RT61 rev B 802.11g
uname -a
Linux makc 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux
Я могу ошибаться, но возможно она у вас просто не определилась, если она работает в других системах (есть возможность проверить?), то скажите.
Я могу ошибаться, но возможно она у вас просто не определилась, если она работает в других системах (есть возможность проверить?), то скажите.
Работала на windows 7 , щас стоит только линукс , через VirtualBox не проверить?
Боюсь, что нет, функционала недостаточно.
Есть другие виртуальные машины, пофункциональнее, можно какой-нибудь LiveCD загрузить.
А пока выведете dmesg (сразу после lspci) и тоже через sudo.
Не было ли какой ошибки.
Ядро можно посвежее попробовать. В 32 в v4l достаточно много изменений.
Nightwolf_ng, +1, тоже верно.
Боюсь, что нет, функционала недостаточно.
Есть другие виртуальные машины, пофункциональнее, можно какой-нибудь LiveCD загрузить.
А пока выведете dmesg (сразу после lspci) и тоже через sudo.
Не было ли какой ошибки.
прописал dmesg очень много вылезло, в терминале даже не все показалось ( скопировать могу но не все
Ядро можно посвежее попробовать. В 32 в v4l достаточно много изменений.
где и как поставить ядро по новее?)
прописал dmesg очень много вылезло, в терминале даже не все показалось ( скопировать могу но не все
Это есть файл /var/log/dmesg
где и как поставить ядро по новее?)
Кеп подсказывает, что обновиться из репозиториев своего дистрибутива. Кстати, какого?
З.Ы. На будущее, берите Beholder, они под лялих дрова пишут активно сами.
З.З.Ы. Можно также попробовать собрать нестабильный v4l. http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers#Using_Mercurial
[quote=MrFelix]прописал dmesg очень много вылезло, в терминале даже не все показалось ( скопировать могу но не все
Это есть файл /var/log/dmesg
где и как поставить ядро по новее?)
Кеп подсказывает, что обновиться из репозиториев своего дистрибутива. Кстати, какого?[/quote]
мне его выложить или что? просто я могу обратить внимание если там ошибка если будет написано Error или Warning если что то другое я даже не подумаю)
Nightwolf_ng, Ubuntu 9.10, если я не ошибаюсь
MrFelix, А какой у файла размер? Если не очень большой, но можно и весь, но всегда такие файлы в тег [ code ]
мне его выложить или что?
Хоть текстом в тег [ code ], хоть файлом к форуму прицепив.
Nightwolf_ng, Ubuntu 9.10, если я не ошибаюсь
MrFelix, А какой у файла размер? Если не очень большой, но можно и весь, но всегда такие файлы в тег [ code ]
Ubuntu 9.10 не ошибаешься :)
text
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 (Ubuntu 2.6.31-20.58-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfff0000 (usable)
[ 0.000000] modified: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
[ 0.000000] modified: 00000000bfff3000 - 00000000c0000000 (ACPI data)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 377ee000 - 37fef0e4
[ 0.000000] Allocated new RAMDISK: 008b2000 - 010b30e4
[ 0.000000] Move RAMDISK from 00000000377ee000 - 0000000037fef0e3 to 008b2000 - 010b30e3
[ 0.000000] ACPI: RSDP 000f7ee0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT bfff3040 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP bfff30c0 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: DSDT bfff3180 06498 (v01 NVIDIA NVDAACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS bfff0000 00040
[ 0.000000] ACPI: SSDT bfff9740 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET bfff9a00 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG bfff9a80 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC bfff9680 0007C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2183MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ad060] TEXT DATA BSS ==> [0000100000 - 00008ad060]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [00008ae000 - 00008b1195] BRK ==> [00008ae000 - 00008b1195]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008b2000 - 00010b30e4] NEW RAMDISK ==> [00008b2000 - 00010b30e4]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f3d60] f3d60
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfff0
[ 0.000000] On node 0 totalpages: 786303
[ 0.000000] free_area_init_node: node 0, pgdat c0788900, node_mem_map c10b4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4368 pages used for memmap
[ 0.000000] HighMem zone: 554722 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c28c4000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780159
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-20-generic root=UUID=7c786cae-f1ed-4ce3-a3f9-7aa382ac4ce1 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15728000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfff0)
[ 0.000000] Memory: 3087340k/3145664k available (4578k kernel code, 57004k reserved, 2146k data, 540k init, 2236360k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0792000 - 0xc0819000 ( 540 kB)
[ 0.000000] .data : 0xc0578948 - 0xc0791408 (2146 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0578948 (4578 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2410.946 MHz processor.
[ 0.000012] spurious 8259A interrupt: IRQ7.
[ 0.001574] Console: colour VGA+ 80x25
[ 0.001576] console [tty0] enabled
[ 0.001738] hpet clockevent registered
[ 0.001742] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001748] Calibrating delay loop (skipped), value calculated using timer frequency.. 4821.89 BogoMIPS (lpj=9643784)
[ 0.001767] Security Framework initialized
[ 0.001789] AppArmor: AppArmor initialized
[ 0.001795] Mount-cache hash table entries: 512
[ 0.001918] Initializing cgroup subsys ns
[ 0.001922] Initializing cgroup subsys cpuacct
[ 0.001925] Initializing cgroup subsys memory
[ 0.001931] Initializing cgroup subsys freezer
[ 0.001933] Initializing cgroup subsys net_cls
[ 0.001944] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001946] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001948] CPU: Physical Processor ID: 0
[ 0.001950] CPU: Processor Core ID: 0
[ 0.001953] mce: CPU supports 5 MCE banks
[ 0.001962] using C1E aware idle routine
[ 0.001970] Performance Counters: AMD PMU driver.
[ 0.001975] ... version: 0
[ 0.001977] ... bit width: 48
[ 0.001978] ... generic counters: 4
[ 0.001980] ... value mask: 0000ffffffffffff
[ 0.001982] ... max period: 00007fffffffffff
[ 0.001983] ... fixed-purpose counters: 0
[ 0.001985] ... counter mask: 000000000000000f
[ 0.001988] Checking 'hlt' instruction... OK.
[ 0.017818] ACPI: Core revision 20090521
[ 0.028584] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068340] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 03
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4821.95 BogoMIPS (lpj=9643918)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 5 MCE banks
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156390] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 03
[ 0.156413] Brought up 2 CPUs
[ 0.156415] Total of 2 processors activated (9643.85 BogoMIPS).
[ 0.156513] CPU0 attaching sched-domain:
[ 0.156516] domain 0: span 0-1 level MC
[ 0.156518] groups: 0 1
[ 0.156523] CPU1 attaching sched-domain:
[ 0.156525] domain 0: span 0-1 level MC
[ 0.156527] groups: 1 0
[ 0.156585] Booting paravirtualized kernel on bare hardware
[ 0.156585] regulator: core version 0.5
[ 0.156585] Time: 14:12:36 Date: 03/24/10
[ 0.156585] NET: Registered protocol family 16
[ 0.156585] EISA bus registered
[ 0.156585] ACPI: bus type pci registered
[ 0.156585] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.156585] PCI: MCFG area at f0000000 reserved in E820
[ 0.156585] PCI: Using MMCONFIG for extended config space
[ 0.156585] PCI: Using configuration type 1 for base access
[ 0.157046] bio: create slab <bio-0> at 0
[ 0.157046] ACPI: EC: Look up EC in DSDT
[ 0.166425] ACPI: Interpreter enabled
[ 0.166429] ACPI: (supports S0 S1 S4 S5)
[ 0.166449] ACPI: Using IOAPIC for interrupt routing
[ 0.174035] ACPI: No dock devices found.
[ 0.174816] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.175044] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175047] pci 0000:00:02.0: PME# disabled
[ 0.175075] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175077] pci 0000:00:03.0: PME# disabled
[ 0.175105] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175107] pci 0000:00:04.0: PME# disabled
[ 0.175336] pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.175342] pci 0000:00:0a.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.175365] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.175370] pci 0000:00:0a.1: PME# disabled
[ 0.175431] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.175457] pci 0000:00:0b.0: supports D1 D2
[ 0.175459] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175463] pci 0000:00:0b.0: PME# disabled
[ 0.175486] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.175514] pci 0000:00:0b.1: supports D1 D2
[ 0.175516] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175520] pci 0000:00:0b.1: PME# disabled
[ 0.175554] pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f]
[ 0.175592] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.175597] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.175601] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 0.175605] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 0.175610] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f]
[ 0.175614] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.175657] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7]
[ 0.175662] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3]
[ 0.175666] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967]
[ 0.175671] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63]
[ 0.175676] pci 0000:00:0f.0: reg 20 io port: [0xcc00-0xcc0f]
[ 0.175680] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.175751] pci 0000:00:10.2: reg 10 io port: [0xc800-0xc8ff]
[ 0.175755] pci 0000:00:10.2: reg 14 io port: [0xc400-0xc4ff]
[ 0.175760] pci 0000:00:10.2: reg 18 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.175781] pci 0000:00:10.2: supports D1 D2
[ 0.175808] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.175813] pci 0000:00:14.0: reg 14 io port: [0xc000-0xc007]
[ 0.175834] pci 0000:00:14.0: supports D1 D2
[ 0.175836] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175839] pci 0000:00:14.0: PME# disabled
[ 0.175939] pci 0000:00:02.0: bridge io port: [0x8000-0x8fff]
[ 0.175942] pci 0000:00:02.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.175946] pci 0000:00:02.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.175981] pci 0000:00:03.0: bridge io port: [0xa000-0xafff]
[ 0.175984] pci 0000:00:03.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
[ 0.175987] pci 0000:00:03.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.176020] pci 0000:03:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.176027] pci 0000:03:00.0: reg 14 64bit mmio: [0xc0000000-0xdfffffff]
[ 0.176034] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.176039] pci 0000:03:00.0: reg 24 io port: [0x9c00-0x9c7f]
[ 0.176044] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.176097] pci 0000:00:04.0: bridge io port: [0x9000-0x9fff]
[ 0.176099] pci 0000:00:04.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.176103] pci 0000:00:04.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
[ 0.176136] pci 0000:04:08.0: reg 10 32bit mmio: [0xfdcf8000-0xfdcfffff]
[ 0.176196] pci 0000:00:10.0: transparent bridge
[ 0.176199] pci 0000:00:10.0: bridge io port: [0xb000-0xbfff]
[ 0.176202] pci 0000:00:10.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.176205] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.176214] pci_bus 0000:00: on NUMA node 0
[ 0.176218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.176399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.227816] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.227941] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[ 0.228073] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.228195] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.228319] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)
[ 0.228444] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.228566] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.228688] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.228812] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.228934] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.229057] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.229181] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 *11 14 15)
[ 0.229303] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.229427] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
[ 0.229549] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.229673] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.229796] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.229918] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.230042] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.230166] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.230324] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.230480] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.230633] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.230786] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.230939] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.231092] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.231245] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.231398] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.231551] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.231705] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.231859] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.232023] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 0.232177] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[ 0.232331] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 0.232486] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.232641] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.232794] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.232948] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.233104] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.233258] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.233413] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.233585] SCSI subsystem initialized
[ 0.233636] libata version 3.00 loaded.
[ 0.233636] usbcore: registered new interface driver usbfs
[ 0.233636] usbcore: registered new interface driver hub
[ 0.233636] usbcore: registered new device driver usb
[ 0.233636] ACPI: WMI: Mapper loaded
[ 0.233636] PCI: Using ACPI for IRQ routing
[ 0.244008] Bluetooth: Core ver 2.15
[ 0.244021] NET: Registered protocol family 31
[ 0.244021] Bluetooth: HCI device and connection manager initialized
[ 0.244021] Bluetooth: HCI socket layer initialized
[ 0.244021] NetLabel: Initializing
[ 0.244021] NetLabel: domain hash size = 128
[ 0.244022] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.244035] NetLabel: unlabeled traffic allowed by default
[ 0.244063] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.244068] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.252023] Switched to high resolution mode on CPU 0
[ 0.252425] Switched to high resolution mode on CPU 1
[ 0.260021] pnp: PnP ACPI init
[ 0.260038] ACPI: bus type pnp registered
[ 0.265189] pnp: PnP ACPI: found 15 devices
[ 0.265191] ACPI: ACPI bus type pnp unregistered
[ 0.265194] PnPBIOS: Disabled by ACPI PNP
[ 0.265205] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.265208] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.265210] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.265213] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.265216] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.265218] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.265221] system 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.265224] system 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.265227] system 00:01: iomem range 0xfec80000-0xfecbffff has been reserved
[ 0.265230] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
[ 0.265235] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.265238] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.265241] system 00:02: ioport range 0x290-0x299 has been reserved
[ 0.265243] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.265251] system 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.265256] system 00:0e: iomem range 0xf0000-0xfffff could not be reserved
[ 0.265259] system 00:0e: iomem range 0xfeff0000-0xfeff00ff has been reserved
[ 0.265261] system 00:0e: iomem range 0xbfff0000-0xbfffffff could not be reserved
[ 0.265264] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.265267] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.265270] system 00:0e: iomem range 0x100000-0xbffeffff could not be reserved
[ 0.265272] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.265276] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.265279] system 00:0e: iomem range 0xfefff000-0xfeffffff has been reserved
[ 0.265281] system 00:0e: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.265284] system 00:0e: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.265287] system 00:0e: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.299939] AppArmor: AppArmor Filesystem Enabled
[ 0.299968] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.299971] pci 0000:00:02.0: IO window: 0x8000-0x8fff
[ 0.299974] pci 0000:00:02.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.299977] pci 0000:00:02.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.299981] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.299983] pci 0000:00:03.0: IO window: 0xa000-0xafff
[ 0.299986] pci 0000:00:03.0: MEM window: 0xfd900000-0xfd9fffff
[ 0.299989] pci 0000:00:03.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.300011] pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
[ 0.300013] pci 0000:00:04.0: IO window: 0x9000-0x9fff
[ 0.300016] pci 0000:00:04.0: MEM window: 0xf8000000-0xfbffffff
[ 0.300019] pci 0000:00:04.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
[ 0.300022] pci 0000:00:10.0: PCI bridge, secondary bus 0000:04
[ 0.300025] pci 0000:00:10.0: IO window: 0xb000-0xbfff
[ 0.300028] pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.300032] pci 0000:00:10.0: PREFETCH window: 0xfdb00000-0xfdbfffff
[ 0.300041] pci 0000:00:02.0: setting latency timer to 64
[ 0.300045] pci 0000:00:03.0: setting latency timer to 64
[ 0.300049] pci 0000:00:04.0: setting latency timer to 64
[ 0.300053] pci 0000:00:10.0: setting latency timer to 64
[ 0.300058] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.300060] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.300063] pci_bus 0000:01: resource 0 io: [0x8000-0x8fff]
[ 0.300065] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.300068] pci_bus 0000:01: resource 2 pref mem [0xfda00000-0xfdafffff]
[ 0.300070] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.300073] pci_bus 0000:02: resource 1 mem: [0xfd900000-0xfd9fffff]
[ 0.300075] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 0.300077] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff]
[ 0.300080] pci_bus 0000:03: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.300082] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xdfffffff]
[ 0.300085] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.300087] pci_bus 0000:04: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.300090] pci_bus 0000:04: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.300092] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.300094] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.300131] NET: Registered protocol family 2
[ 0.300217] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.300516] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.301195] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.301562] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.301565] TCP reno registered
[ 0.301648] NET: Registered protocol family 1
[ 0.301713] Trying to unpack rootfs image as initramfs...
[ 0.494877] Freeing initrd memory: 8196k freed
[ 0.500281] cpufreq-nforce2: No nForce2 chipset.
[ 0.500304] Scanning for low memory corruption every 60 seconds
[ 0.500399] audit: initializing netlink socket (disabled)
[ 0.500414] type=2000 audit(1269439955.500:1): initialized
[ 0.508069] highmem bounce pool size: 64 pages
[ 0.508074] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.509231] VFS: Disk quotas dquot_6.5.2
[ 0.509279] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.509774] fuse init (API version 7.12)
[ 0.509858] msgmni has been set to 1679
[ 0.510080] alg: No test for stdrng (krng)
[ 0.510103] io scheduler noop registered
[ 0.510105] io scheduler anticipatory registered
[ 0.510107] io scheduler deadline registered
[ 0.510144] io scheduler cfq registered (default)
[ 0.510188] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.510208] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.510231] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.524075] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.524082] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.524135] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.524142] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.524197] pci 0000:00:09.0: Found disabled HT MSI Mapping
[ 0.524202] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.524224] pci 0000:03:00.0: Boot video device
[ 0.524318] alloc irq_desc for 24 on node -1
[ 0.524320] alloc kstat_irqs on node -1
[ 0.524328] pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.524333] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.524393] alloc irq_desc for 25 on node -1
[ 0.524394] alloc kstat_irqs on node -1
[ 0.524398] pcieport-driver 0000:00:03.0: irq 25 for MSI/MSI-X
[ 0.524402] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 0.524459] alloc irq_desc for 26 on node -1
[ 0.524461] alloc kstat_irqs on node -1
[ 0.524465] pcieport-driver 0000:00:04.0: irq 26 for MSI/MSI-X
[ 0.524469] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.524519] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.524541] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.524661] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.524664] ACPI: Power Button [PWRF]
[ 0.524710] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.524713] ACPI: Power Button [PWRB]
[ 0.524766] fan PNP0C0B:00: registered as cooling_device0
[ 0.524771] ACPI: Fan [FAN] (on)
[ 0.525110] processor LNXCPU:00: registered as cooling_device1
[ 0.525139] processor LNXCPU:01: registered as cooling_device2
[ 0.529137] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.529146] ACPI: Thermal Zone [THRM] (42 C)
[ 0.529193] isapnp: Scanning for PnP cards...
[ 0.882231] isapnp: No Plug & Play device found
[ 0.883231] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.883345] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.883439] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.883684] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.884563] brd: module loaded
[ 0.884939] loop: module loaded
[ 0.885006] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.885207] sata_nv 0000:00:0e.0: version 3.5
[ 0.885510] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.885517] alloc irq_desc for 23 on node -1
[ 0.885519] alloc kstat_irqs on node -1
[ 0.885530] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.885532] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 0.885578] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 0.885770] scsi0 : sata_nv
[ 0.885864] scsi1 : sata_nv
[ 0.885994] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 0.885997] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 0.886270] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 0.886273] alloc irq_desc for 22 on node -1
[ 0.886275] alloc kstat_irqs on node -1
[ 0.886283] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 0.886285] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 0.886319] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 0.886453] scsi2 : sata_nv
[ 0.886513] scsi3 : sata_nv
[ 0.886637] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 0.886640] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 0.886736] pata_amd 0000:00:0d.0: version 0.4.1
[ 0.886770] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 0.886846] scsi4 : pata_amd
[ 0.886902] scsi5 : pata_amd
[ 0.887472] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 0.887475] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 0.888135] Fixed MDIO Bus: probed
[ 0.888165] PPP generic driver version 2.4.2
[ 0.888271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.888541] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 0.888545] alloc irq_desc for 21 on node -1
[ 0.888547] alloc kstat_irqs on node -1
[ 0.888556] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.888568] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.888571] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.888599] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.888627] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.888631] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 0.888649] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
[ 0.900014] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 0.900078] usb usb1: configuration #1 chosen from 1 choice
[ 0.900105] hub 1-0:1.0: USB hub found
[ 0.900113] hub 1-0:1.0: 8 ports detected
[ 0.900167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.900430] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.900432] alloc irq_desc for 20 on node -1
[ 0.900434] alloc kstat_irqs on node -1
[ 0.900442] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.900449] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 0.900451] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.900482] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.900508] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000
[ 0.958049] usb usb2: configuration #1 chosen from 1 choice
[ 0.958072] hub 2-0:1.0: USB hub found
[ 0.958080] hub 2-0:1.0: 8 ports detected
[ 0.958129] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.958206] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.958208] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.958291] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.958349] mice: PS/2 mouse device common for all mice
[ 0.958435] rtc_cmos 00:05: RTC can wake from S4
[ 0.958467] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.958503] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.958594] device-mapper: uevent: version 1.0.3
[ 0.958690] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.958794] device-mapper: multipath: version 1.1.0 loaded
[ 0.958796] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.958908] EISA: Probing bus 0 at eisa.0
[ 0.958915] Cannot allocate resource for EISA slot 1
[ 0.958917] Cannot allocate resource for EISA slot 2
[ 0.958932] Cannot allocate resource for EISA slot 8
[ 0.958934] EISA: Detected 0 cards.
[ 0.959060] cpuidle: using governor ladder
[ 0.959062] cpuidle: using governor menu
[ 0.959487] TCP cubic registered
[ 0.959613] NET: Registered protocol family 10
[ 0.959983] lo: Disabled Privacy Extensions
[ 0.960263] NET: Registered protocol family 17
[ 0.960278] Bluetooth: L2CAP ver 2.13
[ 0.960280] Bluetooth: L2CAP socket layer initialized
[ 0.960282] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.960284] Bluetooth: SCO socket layer initialized
[ 0.960325] Bluetooth: RFCOMM TTY layer initialized
[ 0.960327] Bluetooth: RFCOMM socket layer initialized
[ 0.960329] Bluetooth: RFCOMM ver 1.11
[ 0.960350] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00)
[ 0.960394] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xe
[ 0.960396] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x10
[ 0.960399] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x10
[ 0.960401] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x10
[ 0.960403] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 0.960442] Using IPI No-Shortcut mode
[ 0.960490] PM: Resume from disk failed.
[ 0.960502] registered taskstats version 1
[ 0.960623] Magic number: 2:437:233
[ 0.960727] rtc_cmos 00:05: setting system clock to 2010-03-24 14:12:36 UTC (1269439956)
[ 0.960730] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.960732] EDD information not available.
[ 0.975812] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.206456] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.216927] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.272016] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 1.672041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.725047] ata2.00: ATA-7: MAXTOR STM3160215AS, 4.AAB, max UDMA/133
[ 1.725050] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.791695] ata2.00: configured for UDMA/133
[ 1.791786] scsi 1:0:0:0: Direct-Access ATA MAXTOR STM316021 4.AA PQ: 0 ANSI: 5
[ 1.791884] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.791918] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.791955] sd 1:0:0:0: [sda] Write Protect is off
[ 1.791957] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.791976] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.792082] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.868954] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.955716] usb 1-3: configuration #1 chosen from 1 choice
[ 2.068017] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 2.114455] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.206708] usb 1-5: configuration #1 chosen from 4 choices
[ 2.292306] ata6.00: ATAPI: TEAC DV-W516GD, P4S1, max UDMA/66
[ 2.292327] ata6: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13)
[ 2.316016] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 2.324248] ata6.00: configured for UDMA/33
[ 2.325556] scsi 5:0:0:0: CD-ROM TEAC DV-W516GD P4S1 PQ: 0 ANSI: 5
[ 2.329513] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.329515] Uniform CD-ROM driver Revision: 3.20
[ 2.329581] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.329614] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.329642] Freeing unused kernel memory: 540k freed
[ 2.329983] Write protecting the kernel text: 4580k
[ 2.330017] Write protecting the kernel read-only data: 1840k
[ 2.424767] ramzswap: disk size set to 774236 kB
[ 2.468587] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.468906] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 2.468912] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 2.468917] forcedeth 0000:00:14.0: setting latency timer to 64
[ 2.468956] nv_probe: set workaround bit for reversed mac addr
[ 2.483125] Adding 774232k swap on /dev/ramzswap0. Priority:100 extents:1 across:774232k SSD
[ 2.486180] usb 1-6: configuration #1 chosen from 1 choice
[ 2.517314] Floppy drive(s): fd0 is 1.44M
[ 2.538288] FDC 0 is a post-1991 82077
[ 2.544631] Initializing USB Mass Storage driver...
[ 2.547339] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2.547637] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2.548035] usb-storage: device found at 3
[ 2.548038] usb-storage: waiting for device to settle before scanning
[ 2.548073] usbcore: registered new interface driver usb-storage
[ 2.548076] USB Mass Storage support registered.
[ 2.548391] usb-storage: device found at 5
[ 2.548392] usb-storage: waiting for device to settle before scanning
[ 2.844023] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 2.988772] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1c:25:36:ef:f0
[ 2.988777] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 3.055105] usb 2-1: configuration #1 chosen from 1 choice
[ 3.062990] usbcore: registered new interface driver hiddev
[ 3.069293] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input4
[ 3.069351] generic-usb 0003:062A:0201.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:0b.0-1/input0
[ 3.079476] input: USB-compliant keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.1/input/input5
[ 3.079572] generic-usb 0003:062A:0201.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:0b.0-1/input1
[ 3.079588] usbcore: registered new interface driver usbhid
[ 3.079591] usbhid: v2.6:USB HID core driver
[ 3.369015] usb 2-8: new low speed USB device using ohci_hcd and address 3
[ 3.587118] usb 2-8: configuration #1 chosen from 1 choice
[ 3.601256] input: A4Tech Wireless Battery Free Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-8/2-8:1.0/input/input6
[ 3.601324] generic-usb 0003:09DA:002B.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech Wireless Battery Free Optical Mouse] on usb-0000:00:0b.0-8/input0
[ 3.996335] xor: automatically using best checksumming function: pIII_sse
[ 4.013008] pIII_sse : 7309.000 MB/sec
[ 4.013011] xor: using function: pIII_sse (7309.000 MB/sec)
[ 4.015283] device-mapper: dm-raid45: initialized v0.2594b
[ 4.347467] PM: Starting manual resume from disk
[ 4.347470] PM: Resume from partition 8:5
[ 4.347472] PM: Checking hibernation image.
[ 4.347662] PM: Resume from disk failed.
[ 4.364711] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 4.364716] EXT4-fs (sda1): write access will be enabled during recovery
[ 4.372129] EXT4-fs (sda1): barriers enabled
[ 5.577021] kjournald2 starting: pid 483, dev sda1:8, commit interval 5 seconds
[ 5.577097] EXT4-fs (sda1): delayed allocation enabled
[ 5.577101] EXT4-fs: file extents enabled
[ 5.578453] EXT4-fs: mballoc enabled
[ 5.578467] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 5.578474] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 242217
[ 5.578582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 133190
[ 5.578908] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 89114
[ 5.578917] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 89113
[ 5.578926] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 89112
[ 5.578935] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 89111
[ 5.578944] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 88949
[ 5.578954] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 331
[ 5.598509] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 15177
[ 5.608800] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 39813
[ 5.610286] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12095
[ 5.612511] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 11935
[ 5.617054] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 37434
[ 5.617210] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 15209
[ 5.617343] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 11936
[ 5.633070] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 10866
[ 5.633213] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 261970
[ 5.633292] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 261969
[ 5.637202] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 84216
[ 5.642498] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3685
[ 5.642523] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3681
[ 5.642538] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 261977
[ 5.642569] EXT4-fs (sda1): 22 orphan inodes deleted
[ 5.642572] EXT4-fs (sda1): recovery complete
[ 5.968115] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 7.206703] Adding 2963952k swap on /dev/sda5. Priority:-1 extents:1 across:2963952k
[ 7.545216] usb-storage: device scan complete
[ 7.545828] usb-storage: device scan complete
[ 7.547942] scsi 7:0:0:0: Direct-Access Kingston DT101 II PMAP PQ: 0 ANSI: 0 CCS
[ 7.551937] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 7.558811] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 7.565934] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 7.572934] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 7.573307] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.573385] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 7.573462] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 7.573541] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 7.573648] sd 7:0:0:0: Attached scsi generic sg6 type 0
[ 7.576685] sd 7:0:0:0: [sdf] 15675392 512-byte logical blocks: (8.02 GB/7.47 GiB)
[ 7.577682] sd 7:0:0:0: [sdf] Write Protect is off
[ 7.577685] sd 7:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 7.577687] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[ 7.578429] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.579190] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 7.579928] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 7.580681] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 7.581805] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[ 7.581857] sdf: sdf4
[ 7.585807] sd 7:0:0:0: [sdf] Assuming drive cache: write through
[ 7.585857] sd 7:0:0:0: [sdf] Attached SCSI removable disk
[ 7.832132] EXT4-fs (sda1): internal journal on sda1:8
[ 8.956569] udev: starting version 147
[ 10.439069] parport_pc 00:0b: reported by Plug and Play ACPI
[ 10.439126] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.460874] EXT4-fs (sda6): barriers enabled
[ 10.468167] kjournald2 starting: pid 869, dev sda6:8, commit interval 5 seconds
[ 10.578455] ppdev: user-space parallel port driver
[ 10.602002] EXT4-fs (sda6): internal journal on sda6:8
[ 10.602008] EXT4-fs (sda6): delayed allocation enabled
[ 10.602011] EXT4-fs: file extents enabled
[ 10.602125] EXT4-fs: mballoc enabled
[ 10.602138] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 10.607568] lp0: using parport0 (interrupt-driven).
[ 10.685537] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.809201] Linux agpgart interface v0.103
[ 10.921795] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.923831] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 10.923849] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 11.033076] cfg80211: Calling CRDA to update world regulatory domain
[ 12.118304] cfg80211: World regulatory domain updated:
[ 12.118308] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.118311] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.118314] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.118317] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.118319] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.118322] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.586180] nvidia: module license 'NVIDIA' taints kernel.
[ 14.586184] Disabling lock debugging due to kernel taint
[ 14.840435] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 14.840442] alloc irq_desc for 16 on node -1
[ 14.840444] alloc kstat_irqs on node -1
[ 14.840454] nvidia 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 14.840461] nvidia 0000:03:00.0: setting latency timer to 64
[ 14.840668] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 15.191335] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 15.191341] alloc irq_desc for 17 on node -1
[ 15.191343] alloc kstat_irqs on node -1
[ 15.191354] rt61pci 0000:04:08.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 15.191360] rt61pci 0000:04:08.0: setting latency timer to 64
[ 15.421496] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 15.421502] Intel ICH 0000:00:10.2: PCI INT C -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[ 15.421523] Intel ICH 0000:00:10.2: setting latency timer to 64
[ 15.441469] phy0: Selected rate control algorithm 'minstrel'
[ 15.442076] Registered led device: rt61pci-phy0::radio
[ 15.442091] Registered led device: rt61pci-phy0::assoc
[ 15.752022] intel8x0_measure_ac97_clock: measured 58816 usecs (2880 samples)
[ 15.752026] intel8x0: clocking to 47053
[ 18.695738] EXT4-fs (sda7): barriers enabled
[ 18.716899] kjournald2 starting: pid 1133, dev sda7:8, commit interval 5 seconds
[ 18.759094] EXT4-fs (sda7): internal journal on sda7:8
[ 18.759117] EXT4-fs (sda7): delayed allocation enabled
[ 18.759120] EXT4-fs: file extents enabled
[ 18.775271] EXT4-fs: mballoc enabled
[ 18.775285] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 20.334583] type=1505 audit(1269439975.872:2): operation="profile_load" pid=1212 name=/usr/share/gdm/guest-session/Xsession
[ 20.410100] type=1505 audit(1269439975.947:3): operation="profile_load" pid=1213 name=/sbin/dhclient3
[ 20.410350] type=1505 audit(1269439975.947:4): operation="profile_load" pid=1213 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 20.410491] type=1505 audit(1269439975.947:5): operation="profile_load" pid=1213 name=/usr/lib/connman/scripts/dhclient-script
[ 20.490260] type=1505 audit(1269439976.027:6): operation="profile_load" pid=1214 name=/usr/bin/evince
[ 20.494405] type=1505 audit(1269439976.032:7): operation="profile_load" pid=1214 name=/usr/bin/evince-previewer
[ 20.496839] type=1505 audit(1269439976.032:8): operation="profile_load" pid=1214 name=/usr/bin/evince-thumbnailer
[ 20.517308] type=1505 audit(1269439976.056:9): operation="profile_load" pid=1216 name=/usr/lib/cups/backend/cups-pdf
[ 20.517612] type=1505 audit(1269439976.056:10): operation="profile_load" pid=1216 name=/usr/sbin/cupsd
[ 20.846008] type=1505 audit(1269439976.384:11): operation="profile_load" pid=1217 name=/usr/sbin/mysqldз.ы я так толком и не понял как обновить ядро, в менеджере Synaptic v4l намекает на видео какое то, >dv4l установленно
Войдите или зарегистрируйтесь, чтобы ответить.
