Intel 6250 и Yota: видит но не подключается

Под офтопиком всё работает.

openSuse x86 11.4, стек wimax из http://download.opensuse.org/repositories/hardware/
[console]$ wimaxcu ron
SW Radio is turned ON.
$ wimaxcu scan
Scanning 80% Done ======-
Network found.
NSP : COMSTAR
ID : 41
Signal : Good
RSSI : -80 dBm
CINR : 12 dB
Network Type: Home Network
Activated.

Network found.
NSP : Yota
ID : 21
Signal : Very Good
RSSI : -58 dBm
CINR : 24 dB
Network Type: Home Network
Activated.

Scanning operation completed.
$ wimaxcu connect network 21
Connecting to Yota Network...
Connection failure
[/console]
Тем временем в wimaxd:
[console]CTRL-EVENT-EAP-STARTED EAP authentication started
Sending EapResponse. Data size: 25
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
SSL: Failed to initialize new TLS connection
EAP-TLS: Failed to initialize SSL.
EAP: Failed to initialize EAP method: vendor 0 method 13 (TLS)
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
SSL: Failed to initialize new TLS connection
EAP-TLS: Failed to initialize SSL.
EAP: Failed to initialize EAP method: vendor 0 method 13 (TLS)
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
SSL: Failed to initialize new TLS connection
EAP-TLS: Failed to initialize SSL.
EAP: Failed to initialize EAP method: vendor 0 method 13 (TLS)
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
SSL: Failed to initialize new TLS connection
EAP-TLS: Failed to initialize SSL.
EAP: Failed to initialize EAP method: vendor 0 method 13 (TLS)
[/console]

Ради эксперимента поставил на флешку убунту и установил там wimax-стек из исходников методом make install (готовых дебов не нашёл). Получил туже самую картину, что и в Сусе.
Загрузился с этой флешки на другом ноуте с intel 5150 — коннектится без проблем.

Кому-нибудь удавалось подружить 6250 с Йотой?