Вопрос по сетке

Уважаемые форумчане!!!
Помогите please!!! Имеется сетка (12 машин) .
На одиннадцати Win XP на последней ASPLinux Cobalt.
C машины с Linuxом все одиннадцать машин видятся нормально, а с машин с XP машина с Linuxом не видится.
Могет проблема в рабочей группе? Подскажите плиз!

Видимо проблемы с настройкой Samba.

А можно глянуть smb.conf с линуксовой машины?

Эт чё такое? Я в Linuxe буб-бум. :(

Расположение /etc/samba/smb.conf

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba-share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#======================= Global Settings =====================================

[global]

# ----------------------- Netwrok Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#
workgroup = MYGROUP
server string = Samba Server Version %v

; netbios name = MYSERVER

; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
; hosts allow = 127. 192.168.12. 192.168.13.

# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach

# logs split per machine
log file = /var/log/samba/log.%m
# max 50KB per log file, then rotate
max log size = 50

# ----------------------- Standalone Server Options ------------------------
#
# Scurity can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.

security = user
passdb backend = tdbsam


# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *


; security = domain
; passdb backend = tdbsam
; realm = MY_REALM

; password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations.
#
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#
; security = user
; passdb backend = tdbsam

; domain master = yes
; domain logons = yes

# the login script name depends on the machine name
; logon script = %m.bat
# the login script name depends on the unix user used
; logon script = %u.bat
; logon path = \\%L\Profiles\%u
# disables profiles support by specifing an empty path
; logon path =

; add user script = /usr/sbin/useradd "%u" -n -g users
; add group script = /usr/sbin/groupadd "%g"
; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
; delete user script = /usr/sbin/userdel "%u"
; delete user from group script = /usr/sbin/userdel "%u" "%g"
; delete group script = /usr/sbin/groupdel "%g"


# ----------------------- Browser Control Options ----------------------------
#
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; local master = no
; os level = 33
; preferred master = yes

#----------------------------- Name Resolution -------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#
# - WINS Support: Tells the NMBD component of Samba to enable it's WINS Server
#
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
#
# - WINS Proxy: Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
#
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.

; wins support = yes
; wins server = w.x.y.z
; wins proxy = yes

; dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
#
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
#
# Printcap Name let you specify an alternative printcap file
#
# You can choose a non default printing system using the Printing option

load printers = yes
cups options = raw

; printcap name = /etc/printcap
#obtain list of printers automatically on SystemV
; printcap name = lpstat
; printing = cups

# --------------------------- Filesystem Options ---------------------------
#
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
#
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares

; map archive = no
; map hidden = no
; map read only = no
; map system = no
; store dos attributes = yes


#============================ Share Definitions ==============================

[homes]
comment = Home Directories
browseable = no
writable = yes
; valid users = %S
; valid users = MYDOMAIN\%S

[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
guest ok = no
writable = no
printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
; [Profiles]
; path = /var/lib/samba/profiles
; browseable = no
; guest ok = yes


# A publicly accessible directory, but read only, except for people in
# the "staff" group
; [public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = +staff

попробуй расшарить любой каталог которй на асп, и тода погляди. (в гноме на папке кликаеш правой клавишей мыши и выбираеш общий доступ)

А что такое "гном"?

Lakers написал:

А что такое "гном"?

Это такой маленький и вонючий.
Нужно установить и настроить samba server на линукс машине.
Пакет называется типа samba-server, или просто samba. Не знаю, как в Вашем дистрибутиве.
Можно руками, прочитав мануал. А можно запустить swat и настроить и браузер.
У вас сеть какая, с PDC, AD?

Lakers написал:

А что такое "гном"?

Гном \Gnome\ - это графическая оболочка пользователя в линуксе.
Ничего страшного что ты про неё не знаешь, даже хорошо. ИМХО на серваке не должно быть графики.
Переходим к Sambe.
То что виндовые машины не видят линуксовую это есть Samba. Точнее её отсутствие.
Теперь по порядку.
1. от рута делаешь команду rpm -qa | grep samba
Должно вывести помимо samba-client ещё samba-server и samba-common
2. если этого нету, то делаешь опять же от рута
yum install samba (нужно соединение с инетом) ну или поставь с диска установочного
rpm -ihv samba*
3. сохрани свой конфиг в безопасное место cp /etc/samba/smb.conf /home/smb.conf
Затем замени содержимое /etc/samba/smb.conf вот этим конфигом:

[global]
    workgroup = {Здесь напиши сам имя своей рабочей группы или домена}
    server string = Samba Server Version %v
   
   netbios name = {Здесь напиши имя своей линуксовой машины}
   
    interfaces = lo eth0
    hosts allow = 127. 192.168.0. {Адрес твоей подсети}
    log file = /var/log/samba/log.%m
    max log size = 50
    security = user
    passdb backend = tdbsam
    local master = yes
    os level = 100
    preferred master = yes
    dns proxy = no
    load printers = no
#  cups options = raw  {Если на линуксовой машине нет принтера, расшаренного для всех, то строки про принтер вообще удали}
#   printcap name = /etc/printcap
;    printcap name = lpstat
;    printing = cups
     store dos attributes = yes
[Public]
    comment = Public Stuff
    path = /home/samba
    public = yes
    writable = yes
    printable = no {Коме этой}

4. Сделай service smb restart
5. Попробуй обратится к совему серваку с виндовой машины.
Учти, что прежде чем всё станешь делать, папка /home/samba должна существовать, и на неё должны быть полные права для пользователя: mkdir /home/samba && chmod 777 /home/samba
Всё делаешь от рута. Всё что в фигурных скобках в конфиге заменяешь на своё. Сами фигурные скобки удали, я их поставил для тебя только, для наглядности
Это не окончательный вариант, но сделав это можно идти дальше.
Удачи!
Если что - отпишись.

Vadimsky, большое человеческое СПС.
Как сделаю отпишусь. А ком. строка в linuxe это Alt+Ctrl+F1?

Сделай service smb restart

Lakers написал:

И вот это как сделать?

это команду надо набрать в консоли линукс под учётной записью root.

Alt+Ctrl+F1 - это первый терминал.
Alt+Ctrl+F2 - соответственно второй и так далее, обычно их 6.
Но можно уменьшить увеличить, в настройках, если понадобится.
войти в командную строку можно и так, а можно и из того же гнома, запустив xterm, тогда в этом случае буду доступны стандартные функции копировать-вставить.

Всё сделал, но ничего не работает!!!1 :( :( :( :(

попробуй еще так:
/etc/init.d/nmb start
кстати а дистрибутив какой?

Уважаемые форумчане, доброго времени суток!
Подскажите, плз., с чем связать подобное сообщение в net-smpd.log:
error on subcontainer 'ia_addr' insert (-1)
Влияет это как-то на работу сети? :rolleyes: