MySQL набор ошибок

#urpmi mysql

#mysql

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)

#chmod -R 777 /var/lib/mysql

#mysqld stop
mysqld: Table 'mysql.plugin' doesn't exist
101123  1:16:04 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it.
InnoDB: The first specified data file ./ibdata1 did not exist:
InnoDB: a new database to be created!
101123  1:16:04  InnoDB: Setting file ./ibdata1 size to 10 MB
InnoDB: Database physically writes the file full: wait...
101123  1:16:05  InnoDB: Log file ./ib_logfile0 did not exist: new to be created
InnoDB: Setting log file ./ib_logfile0 size to 5 MB
InnoDB: Database physically writes the file full: wait...
101123  1:16:05  InnoDB: Log file ./ib_logfile1 did not exist: new to be created
InnoDB: Setting log file ./ib_logfile1 size to 5 MB
InnoDB: Database physically writes the file full: wait...
InnoDB: Doublewrite buffer not found: creating new
InnoDB: Doublewrite buffer created
InnoDB: Creating foreign key constraint system tables
InnoDB: Foreign key constraint system tables created
101123  1:16:06  InnoDB: Started; log sequence number 0 0
mysqld: Too many arguments (first extra is 'stop').
Use --verbose --help to get a list of available options
101123  1:16:06 [ERROR] Aborting
101123  1:16:06  InnoDB: Starting shutdown...
101123  1:16:08  InnoDB: Shutdown completed; log sequence number 0 44233
101123  1:16:08 [Note] mysqld: Shutdown complete

#mysqld start
mysqld: Table 'mysql.plugin' doesn't exist
101123  1:16:19 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it.
101123  1:16:19  InnoDB: Started; log sequence number 0 44233
mysqld: Too many arguments (first extra is 'start').
Use --verbose --help to get a list of available options
101123  1:16:19 [ERROR] Aborting
101123  1:16:19  InnoDB: Starting shutdown...
101123  1:16:21  InnoDB: Shutdown completed; log sequence number 0 44233
101123  1:16:21 [Note] mysqld: Shutdown complete

#mysql_upgrade
Looking for 'mysql' as: mysql
Looking for 'mysqlcheck' as: mysqlcheck
Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/lib/mysql/mysql.sock' 
mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) when trying to connect
FATAL ERROR: Upgrade failed

# mysql -u root -p

# A generic my.cnf file based on /usr/share/mysql/my-medium.cnf
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# The following options will be passed to all MySQL clients
[client]
user        = root
password    = **********
port        = 3306
socket        = /var/lib/mysql/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
user        = mysql
datadir        = /var/lib/mysql
port        = 3306
socket        = /var/lib/mysql/mysql.sock
pid-file    = /var/run/mysqld/mysqld.pid
skip-locking
key_buffer = 16M
max_allowed_packet = 32M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
collation_server = utf8_unicode_ci
character_set_server = utf8
# plugins
plugin_dir=/usr/lib/mysql/plugin
#plugin-load=ha_archive.so;ha_blackhole.so;ha_innodb.so;ha_revision.so;ha_sphinx.so;libpbxt.so
# acivate the federated storage engine
federated
# Default to using old password format for compatibility with old and
# shorter password hash.
# Reference: http://dev.mysql.com/doc/mysql/en/Password_hashing.html
old_passwords
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
# 
#skip-networking
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
# Replication Master Server (default)
# binary logging is required for replication
#log-bin=mysql-bin
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id    = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
#    the syntax is:
#
#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
#    where you replace <host>, <user>, <password> by quoted strings and
#    <port> by the master's port number (3306 by default).
#
#    Example:
#
#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
#    MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
#    start replication for the first time (even unsuccessfully, for example
#    if you mistyped the password in master-password and the slave fails to
#    connect), the slave will create a master.info file, and any later
#    change in this file to the variables' values below will be ignored and
#    overridden by the content of the master.info file, unless you shutdown
#    the slave server, delete master.info and restart the slaver server.
#    For that reason, you may want to leave the lines below untouched
#    (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id       = 2
#
# The replication master for this slave - required
#master-host     =   <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user     =   <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =   <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port     =  <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Point the following paths to different dedicated disks
tmpdir        = /var/tmp
#log-update     = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql/
#innodb_log_arch_dir = /var/lib/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
#bind-address=192.168.100.1
## Options for mysqld process:
#ndbcluster                      # run NDB engine
#ndb-connectstring=192.168.0.10  # location of MGM node
## Options for ndbd process:
#[mysql_cluster]                 
#ndb-connectstring=192.168.0.10  # location of MGM node
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
default-character-set = utf8
[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
[mysql.server]
user=mysql
basedir=/var/lib
[mysqld_safe]
err-log=/var/log/mysqld/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
# MySQL Instance Manager options section
[manager]
user=mysql
default-mysqld-path=/usr/sbin/mysqld
socket=/var/lib/mysql/mysqlmanager.sock
pid-file=/var/run/mysqld/mysqlmanager.pid
password-file=/etc/mysqlmanager.passwd
run-as-service
monitoring-interval=20
port=2273
#bind-address=192.168.100.1

# acivate the federated storage engine
federated

mysqld start

mysql -u root -p

#urpme -a mysql

#uprme --auto-orphans

#urpmi mysql

mysql -u root -p
Enter password: 
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)

mysql -u root
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 184
Server version: 5.1.40 Mandriva Linux - MySQL Standard Edition (GPL)
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> 

mysqladmin -u root -p password 'новыйпароль'

mysqladmin -u root password 'новыйпароль'