CentOS падает Хостинг сервер

20.09.2010 07:18 #81247

Доброе время суток уважаемые гуру и не только!
Появился вопрос как выявить из за чего физические перезагрузки сервера? Вот вся подноготная
Нужен был хостинг с панелью управления с почтой своей днской фтп сервером и тп и тд
Выбор пал на ISPconfig 3 все настроил все сделал все завелось все работает хосты пишутся почта отправляется днс работает ! но вот не задача после каких либо манипуляций либо с подстройкой либо с копированием файлов на хостинг и обработкой чего либо хостинг сервер начал валится в перезагрузку. Ребят подскажите куда рыть что делать Начальство запилило у самого опыта не хватает!
Сервер : HP dl380
2 процессора Intel Xeon 2.53
22 Gb оперативной памяти
4 sas винта по 72 Gb
Оs CentOS 5.5 final x86_x64
Настройка производилась по данному мануалу: http://pcvector.ru/t1276/

20.09.2010 10:02 #81276

А логи где?

20.09.2010 10:31 #81279

Hrafn написал:
А логи где?

Скажите какие предоставить логи и я их предоставлю!
я просто не знаю даже не так я не представляю что может быть с ним не так и что нужно выложить

20.09.2010 10:39 #81280

как минимум: /var/log/messages

20.09.2010 11:24 #81296

text

Sep 20 10:02:24 linux kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Sep 20 10:02:24 linux kernel: pnp: PnP ACPI init
Sep 20 10:02:24 linux kernel: pnp: PnP ACPI: found 11 devices
Sep 20 10:02:24 linux kernel: usbcore: registered new driver usbfs
Sep 20 10:02:24 linux kernel: usbcore: registered new driver hub
Sep 20 10:02:24 linux kernel: PCI: Using ACPI for IRQ routing
Sep 20 10:02:24 linux kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Sep 20 10:02:24 linux kernel: NetLabel: Initializing
Sep 20 10:02:24 linux kernel: NetLabel:  domain hash size = 128
Sep 20 10:02:24 linux kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Sep 20 10:02:24 linux kernel: NetLabel:  unlabeled traffic allowed by default
Sep 20 10:02:24 linux kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
Sep 20 10:02:24 linux kernel: hpet0: 4 64-bit timers, 14318180 Hz
Sep 20 10:02:24 linux clamd[4385]: Loaded 834032 signatures. 
Sep 20 10:02:24 linux kernel: DMAR:Host address width 39
Sep 20 10:02:24 linux kernel: DMAR:DRHD base: 0x000000dfffe000 flags: 0x1
Sep 20 10:02:24 linux kernel: IOMMU dfffe000: ver 1:0 cap c90780106f0462 ecap f0207e
Sep 20 10:02:24 linux clamd[4385]: TCP: Bound to address 127.0.0.1 on port 3310 
Sep 20 10:02:24 linux kernel: DMAR:RMRR base: 0x000000d77fc000 end: 0x000000d77fdfff
Sep 20 10:02:24 linux clamd[4385]: TCP: Setting connection queue length to 30 
Sep 20 10:02:24 linux kernel: DMAR:RMRR base: 0x000000d77f5000 end: 0x000000d77fafff
Sep 20 10:02:24 linux clamd[4385]: LOCAL: Unix socket file /var/run/clamav/clamd.sock 
Sep 20 10:02:24 linux kernel: DMAR:RMRR base: 0x000000d764e000 end: 0x000000d764ffff
Sep 20 10:02:24 linux clamd[4385]: LOCAL: Setting connection queue length to 30 
Sep 20 10:02:24 linux kernel: DMAR:ATSR flags: 0x0
Sep 20 10:02:24 linux clamd[4386]: Limits: Global size limit set to 104857600 bytes. 
Sep 20 10:02:24 linux kernel: PCI-GART: No AMD northbridge found.
Sep 20 10:02:24 linux clamd[4386]: Limits: File size limit set to 26214400 bytes. 
Sep 20 10:02:24 linux kernel: pnp: 00:01: ioport range 0x408-0x40f has been reserved
Sep 20 10:02:24 linux clamd[4386]: Limits: Recursion level limit set to 16. 
Sep 20 10:02:24 linux kernel: pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
Sep 20 10:02:24 linux clamd[4386]: Limits: Files limit set to 10000. 
Sep 20 10:02:24 linux kernel: pnp: 00:01: ioport range 0x700-0x71f has been reserved
Sep 20 10:02:25 linux clamd[4386]: Archive support enabled. 
Sep 20 10:02:25 linux kernel: PCI: Bridge: 0000:00:01.0
Sep 20 10:02:25 linux clamd[4386]: Archive: Blocking encrypted archives. 
Sep 20 10:02:25 linux kernel:   IO window: 4000-4fff
Sep 20 10:02:25 linux clamd[4386]: Algorithmic detection enabled. 
Sep 20 10:02:25 linux kernel:   MEM window: f7b00000-f7ffffff
Sep 20 10:02:25 linux clamd[4386]: Portable Executable support enabled. 
Sep 20 10:02:25 linux kernel:   PREFETCH window 0x00000000e8000000-0x00000000e80fffff
Sep 20 10:02:25 linux clamd[4386]: ELF support enabled. 
Sep 20 10:02:25 linux kernel: PCI: Bridge: 0000:00:02.0
Sep 20 10:02:25 linux clamd[4386]: Detection of broken executables enabled. 
Sep 20 10:02:25 linux kernel:   IO window: disabled.
Sep 20 10:02:25 linux clamd[4386]: Mail files support enabled. 
Sep 20 10:02:25 linux kernel:   MEM window: disabled.
Sep 20 10:02:25 linux clamd[4386]: OLE2 support enabled. 
Sep 20 10:02:25 linux kernel:   PREFETCH window: disabled.
Sep 20 10:02:25 linux clamd[4386]: PDF support enabled. 
Sep 20 10:02:25 linux kernel: PCI: Bridge: 0000:00:03.0
Sep 20 10:02:26 linux clamd[4386]: HTML support enabled. 
Sep 20 10:02:26 linux kernel:   IO window: disabled.
Sep 20 10:02:26 linux clamd[4386]: Self checking every 600 seconds. 
Sep 20 10:02:26 linux kernel:   MEM window: disabled.
Sep 20 10:02:26 linux kernel:   PREFETCH window: disabled.
Sep 20 10:02:26 linux kernel: PCI: Bridge: 0000:00:04.0
Sep 20 10:02:26 linux kernel:   IO window: disabled.
Sep 20 10:02:26 linux kernel:   MEM window: disabled.
Sep 20 10:02:26 linux kernel:   PREFETCH window: disabled.
Sep 20 10:02:26 linux kernel: PCI: Bridge: 0000:00:05.0
Sep 20 10:02:26 linux kernel:   IO window: disabled.
Sep 20 10:02:26 linux kernel:   MEM window: disabled.
Sep 20 10:02:26 linux kernel:   PREFETCH window: disabled.
Sep 20 10:02:26 linux kernel: PCI: Bridge: 0000:00:06.0
Sep 20 10:02:26 linux kernel:   IO window: disabled.
Sep 20 10:02:26 linux kernel:   MEM window: disabled.
Sep 20 10:02:26 linux kernel:   PREFETCH window: disabled.
Sep 20 10:02:26 linux kernel: PCI: Bridge: 0000:00:07.0
Sep 20 10:02:26 linux kernel:   IO window: disabled.
Sep 20 10:02:26 linux kernel:   MEM window: f8000000-fbffffff
Sep 20 10:02:26 linux kernel:   PREFETCH window 0x00000000e8100000-0x00000000e81fffff
Sep 20 10:02:26 linux kernel: PCI: Bridge: 0000:00:08.0
Sep 20 10:02:26 linux kernel:   IO window: disabled.
Sep 20 10:02:26 linux kernel:   MEM window: disabled.
Sep 20 10:02:26 linux kernel:   PREFETCH window: disabled.
Sep 20 10:02:26 linux kernel: PCI: Bridge: 0000:00:09.0
Sep 20 10:02:26 linux kernel:   IO window: disabled.
Sep 20 10:02:27 linux kernel:   MEM window: disabled.
Sep 20 10:02:27 linux kernel:   PREFETCH window: disabled.
Sep 20 10:02:27 linux kernel: PCI: Bridge: 0000:00:0a.0
Sep 20 10:02:27 linux kernel:   IO window: disabled.
Sep 20 10:02:27 linux kernel:   MEM window: disabled.
Sep 20 10:02:27 linux kernel:   PREFETCH window: disabled.
Sep 20 10:02:27 linux kernel: PCI: Bridge: 0000:00:1c.0
Sep 20 10:02:27 linux kernel:   IO window: disabled.
Sep 20 10:02:27 linux kernel:   MEM window: ee000000-f1ffffff
Sep 20 10:02:27 linux kernel:   PREFETCH window 0x00000000e8200000-0x00000000e82fffff
Sep 20 10:02:27 linux kernel: PCI: Bridge: 0000:00:1c.2
Sep 20 10:02:27 linux kernel:   IO window: disabled.
Sep 20 10:02:27 linux kernel:   MEM window: f2000000-f5ffffff
Sep 20 10:02:27 linux kernel:   PREFETCH window 0x00000000e8300000-0x00000000e83fffff
Sep 20 10:02:27 linux kernel: PCI: Bridge: 0000:00:1e.0
Sep 20 10:02:27 linux kernel:   IO window: 2000-3fff
Sep 20 10:02:27 linux kernel:   MEM window: ede00000-edffffff
Sep 20 10:02:27 linux kernel:   PREFETCH window 0x00000000e0000000-0x00000000e7ffffff
Sep 20 10:02:27 linux kernel: GSI 16 sharing vector 0xA9 and IRQ 16
Sep 20 10:02:28 linux kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 20 10:02:28 linux kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 16 (level, low) -> IRQ 169
Sep 20 10:02:28 linux kernel: NET: Registered protocol family 2
Sep 20 10:02:28 linux kernel: IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
Sep 20 10:02:28 linux kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Sep 20 10:02:28 linux kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep 20 10:02:28 linux kernel: TCP: Hash tables configured (established 262144 bind 65536)
Sep 20 10:02:28 linux kernel: TCP reno registered
Sep 20 10:02:28 linux kernel: audit: initializing netlink socket (disabled)
Sep 20 10:02:28 linux kernel: type=2000 audit(1284976878.384:1): initialized
Sep 20 10:02:28 linux kernel: Total HugeTLB memory allocated, 0
Sep 20 10:02:28 linux kernel: VFS: Disk quotas dquot_6.5.1
Sep 20 10:02:28 linux kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 20 10:02:28 linux kernel: Initializing Cryptographic API
Sep 20 10:02:28 linux kernel: alg: No test for crc32c (crc32c-generic)
Sep 20 10:02:28 linux kernel: ksign: Installing public key data
Sep 20 10:02:28 linux kernel: Loading keyring
Sep 20 10:02:28 linux kernel: - Added public key 9BCE751F598F1880
Sep 20 10:02:28 linux kernel: - User ID: CentOS (Kernel Module GPG key)
Sep 20 10:02:28 linux kernel: io scheduler noop registered
Sep 20 10:02:28 linux kernel: io scheduler anticipatory registered
Sep 20 10:02:28 linux kernel: io scheduler deadline registered
Sep 20 10:02:28 linux kernel: io scheduler cfq registered (default)
Sep 20 10:02:28 linux kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 20 10:02:28 linux kernel: ACPI: CPU0 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU8 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU4 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU12 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU2 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU10 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU6 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU14 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU1 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU9 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU5 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU13 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU3 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU11 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU7 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: CPU15 (power states: C1[C1] C2[C3] C3[C3])
Sep 20 10:02:28 linux kernel: ACPI: Thermal Zone [THM0] (8 C)
Sep 20 10:02:29 linux kernel: Real Time Clock Driver v1.12ac
Sep 20 10:02:29 linux kernel: Non-volatile memory driver v1.2
Sep 20 10:02:29 linux kernel: Linux agpgart interface v0.101 (c) Dave Jones
Sep 20 10:02:29 linux kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Sep 20 10:02:29 linux kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
Sep 20 10:02:29 linux kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A
Sep 20 10:02:29 linux kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 20 10:02:29 linux kernel: brd: module loaded
Sep 20 10:02:29 linux kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Sep 20 10:02:29 linux kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 20 10:02:29 linux kernel: ide-floppy driver 0.99.newide
Sep 20 10:02:29 linux kernel: usbcore: registered new driver hiddev
Sep 20 10:02:29 linux kernel: usbcore: registered new driver usbhid
Sep 20 10:02:29 linux kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Sep 20 10:02:29 linux kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
Sep 20 10:02:29 linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 20 10:02:29 linux kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 20 10:02:30 linux kernel: mice: PS/2 mouse device common for all mice
Sep 20 10:02:30 linux kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Sep 20 10:02:30 linux kernel: md: bitmap version 4.39
Sep 20 10:02:30 linux kernel: TCP bic registered
Sep 20 10:02:30 linux kernel: Initializing IPsec netlink socket
Sep 20 10:02:30 linux kernel: NET: Registered protocol family 1
Sep 20 10:02:30 linux kernel: NET: Registered protocol family 17
Sep 20 10:02:30 linux kernel: ACPI: (supports S0 S4 S5)
Sep 20 10:02:30 linux kernel: Initalizing network drop monitor service
Sep 20 10:02:30 linux kernel: Freeing unused kernel memory: 212k freed
Sep 20 10:02:30 linux kernel: Write protecting the kernel read-only data: 504k
Sep 20 10:02:30 linux kernel: GSI 17 sharing vector 0x5A and IRQ 17
Sep 20 10:02:30 linux kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 90
Sep 20 10:02:30 linux kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep 20 10:02:30 linux kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep 20 10:02:30 linux kernel: ehci_hcd 0000:00:1d.7: debug port 1
Sep 20 10:02:30 linux kernel: ehci_hcd 0000:00:1d.7: irq 90, io mem 0xeddf0000
Sep 20 10:02:30 linux kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Sep 20 10:02:30 linux kernel: usb usb1: configuration #1 chosen from 1 choice
Sep 20 10:02:30 linux kernel: hub 1-0:1.0: USB hub found
Sep 20 10:02:30 linux kernel: hub 1-0:1.0: 8 ports detected
Sep 20 10:02:30 linux kernel: USB Universal Host Controller Interface driver v3.0
Sep 20 10:02:30 linux kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 90
Sep 20 10:02:30 linux kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.0: irq 90, io base 0x00001000
Sep 20 10:02:31 linux kernel: usb usb2: configuration #1 chosen from 1 choice
Sep 20 10:02:31 linux kernel: hub 2-0:1.0: USB hub found
Sep 20 10:02:31 linux kernel: hub 2-0:1.0: 2 ports detected
Sep 20 10:02:31 linux kernel: GSI 18 sharing vector 0x62 and IRQ 18
Sep 20 10:02:31 linux kernel: ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 23 (level, low) -> IRQ 98
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.1: irq 98, io base 0x00001020
Sep 20 10:02:31 linux kernel: usb usb3: configuration #1 chosen from 1 choice
Sep 20 10:02:31 linux kernel: hub 3-0:1.0: USB hub found
Sep 20 10:02:31 linux kernel: hub 3-0:1.0: 2 ports detected
Sep 20 10:02:31 linux kernel: GSI 19 sharing vector 0x6A and IRQ 19
Sep 20 10:02:31 linux kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 106
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.2: irq 106, io base 0x00001040
Sep 20 10:02:31 linux kernel: usb usb4: configuration #1 chosen from 1 choice
Sep 20 10:02:31 linux kernel: hub 4-0:1.0: USB hub found
Sep 20 10:02:31 linux kernel: hub 4-0:1.0: 2 ports detected
Sep 20 10:02:31 linux kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 98
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:00:1d.3: irq 98, io base 0x00001060
Sep 20 10:02:31 linux kernel: usb usb5: configuration #1 chosen from 1 choice
Sep 20 10:02:31 linux kernel: hub 5-0:1.0: USB hub found
Sep 20 10:02:31 linux kernel: hub 5-0:1.0: 2 ports detected
Sep 20 10:02:31 linux kernel: ACPI: PCI Interrupt 0000:01:04.4[b] -> GSI 22 (level, low) -> IRQ 106
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:01:04.4: UHCI Host Controller
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
Sep 20 10:02:31 linux kernel: uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
Sep 20 10:02:32 linux kernel: uhci_hcd 0000:01:04.4: irq 106, io base 0x00003800
Sep 20 10:02:32 linux kernel: usb usb6: configuration #1 chosen from 1 choice
Sep 20 10:02:32 linux kernel: hub 6-0:1.0: USB hub found
Sep 20 10:02:32 linux kernel: hub 6-0:1.0: 2 ports detected
Sep 20 10:02:32 linux kernel: SCSI subsystem initialized
Sep 20 10:02:32 linux kernel: HP CISS Driver (v 3.6.20-RH4)
Sep 20 10:02:32 linux kernel: GSI 20 sharing vector 0x72 and IRQ 20
Sep 20 10:02:32 linux kernel: ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 28 (level, low) -> IRQ 114
Sep 20 10:02:32 linux kernel: cciss0: <0x323a> at PCI 0000:04:00.0 IRQ 138 using DAC
Sep 20 10:02:32 linux kernel:       blocks= 429915465 block_size= 512
Sep 20 10:02:32 linux kernel:       heads= 255, sectors= 63, cylinders= 26761
Sep 20 10:02:32 linux kernel: 
Sep 20 10:02:32 linux kernel:       blocks= 429915465 block_size= 512
Sep 20 10:02:32 linux kernel:       heads= 255, sectors= 63, cylinders= 26761
Sep 20 10:02:32 linux kernel: 
Sep 20 10:02:32 linux kernel:  cciss/c0d0: p1 p2
Sep 20 10:02:32 linux kernel: Initializing USB Mass Storage driver...
Sep 20 10:02:32 linux kernel: usb 6-1: new full speed USB device using uhci_hcd and address 2
Sep 20 10:02:32 linux kernel: usb 6-1: configuration #1 chosen from 1 choice
Sep 20 10:02:32 linux kernel: input: HP Virtual Keyboard as /class/input/input0
Sep 20 10:02:32 linux kernel: input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
Sep 20 10:02:32 linux kernel: input: HP Virtual Keyboard as /class/input/input1
Sep 20 10:02:32 linux kernel: input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
Sep 20 10:02:32 linux kernel: usb 6-2: new full speed USB device using uhci_hcd and address 3
Sep 20 10:02:32 linux kernel: usb 6-2: configuration #1 chosen from 1 choice
Sep 20 10:02:32 linux kernel: hub 6-2:1.0: USB hub found
Sep 20 10:02:32 linux kernel: hub 6-2:1.0: 7 ports detected
Sep 20 10:02:32 linux kernel: usbcore: registered new driver usb-storage
Sep 20 10:02:33 linux kernel: USB Mass Storage support registered.
Sep 20 10:02:33 linux kernel: device-mapper: uevent: version 1.0.3
Sep 20 10:02:33 linux kernel: device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
Sep 20 10:02:33 linux kernel: device-mapper: dm-raid45: initialized v0.2594l
Sep 20 10:02:33 linux kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Sep 20 10:02:33 linux kernel: EXT3-fs: write access will be enabled during recovery.
Sep 20 10:02:33 linux kernel: kjournald starting.  Commit interval 5 seconds
Sep 20 10:02:33 linux kernel: EXT3-fs: dm-0: orphan cleanup on readonly fs
Sep 20 10:02:33 linux kernel: EXT3-fs: dm-0: 6 orphan inodes deleted
Sep 20 10:02:33 linux kernel: EXT3-fs: recovery complete.
Sep 20 10:02:33 linux kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 20 10:02:33 linux kernel: SELinux:  Disabled at runtime.
Sep 20 10:02:33 linux kernel: type=1404 audit(1284976911.504:2): selinux=0 auid=4294967295 ses=4294967295
Sep 20 10:02:33 linux kernel: input: PC Speaker as /class/input/input2
Sep 20 10:02:33 linux kernel: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
Sep 20 10:02:33 linux kernel: GSI 21 sharing vector 0x9A and IRQ 21
Sep 20 10:02:33 linux kernel: ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 30 (level, low) -> IRQ 154
Sep 20 10:02:33 linux kernel: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem fa000000, IRQ 154, node addr 002655862e64
Sep 20 10:02:33 linux kernel: GSI 22 sharing vector 0xA2 and IRQ 22
Sep 20 10:02:33 linux kernel: ACPI: PCI Interrupt 0000:0d:00.1[b] -> GSI 37 (level, low) -> IRQ 162
Sep 20 10:02:33 linux kernel: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 162, node addr 002655862e66
Sep 20 10:02:33 linux kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Sep 20 10:02:34 linux kernel: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f0000000, IRQ 169, node addr 0025b3deda14
Sep 20 10:02:34 linux kernel: GSI 23 sharing vector 0xAA and IRQ 23
Sep 20 10:02:34 linux kernel: ACPI: PCI Interrupt 0000:02:00.1[b] -> GSI 17 (level, low) -> IRQ 170
Sep 20 10:02:34 linux kernel: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem ee000000, IRQ 170, node addr 0025b3deda16
Sep 20 10:02:34 linux kernel: GSI 24 sharing vector 0xB2 and IRQ 24
Sep 20 10:02:34 linux kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 178
Sep 20 10:02:34 linux kernel: eth4: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 178, node addr 0025b3deda18
Sep 20 10:02:34 linux kernel: GSI 25 sharing vector 0xBA and IRQ 25
Sep 20 10:02:34 linux kernel: ACPI: PCI Interrupt 0000:03:00.1[b] -> GSI 19 (level, low) -> IRQ 186
Sep 20 10:02:34 linux kernel: eth5: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 186, node addr 0025b3deda1a
Sep 20 10:02:34 linux kernel: ACPI: PCI Interrupt 0000:01:04.2[b] -> GSI 22 (level, low) -> IRQ 106
Sep 20 10:02:34 linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Sep 20 10:02:34 linux kernel: Floppy drive(s): fd0 is 1.44M
Sep 20 10:02:34 linux kernel: floppy0: no floppy controllers found
Sep 20 10:02:34 linux kernel: Floppy drive(s): fd0 is 1.44M
Sep 20 10:02:34 linux kernel: floppy0: no floppy controllers found
Sep 20 10:02:34 linux kernel: lp: driver loaded but no devices found
Sep 20 10:02:34 linux kernel: ACPI: Power Button (FF) [PWRF]
Sep 20 10:02:34 linux kernel: ACPI: Mapper loaded
Sep 20 10:02:34 linux kernel: dell-wmi: No known WMI GUID found
Sep 20 10:02:34 linux kernel: md: Autodetecting RAID arrays.
Sep 20 10:02:34 linux kernel: md: autorun ...
Sep 20 10:02:34 linux kernel: md: ... autorun DONE.
Sep 20 10:02:34 linux kernel: device-mapper: multipath: version 1.0.5 loaded
Sep 20 10:02:34 linux kernel: loop: loaded (max 8 devices)
Sep 20 10:02:34 linux kernel: EXT3 FS on dm-0, internal journal
Sep 20 10:02:34 linux kernel: kjournald starting.  Commit interval 5 seconds
Sep 20 10:02:34 linux kernel: EXT3 FS on cciss/c0d0p1, internal journal
Sep 20 10:02:34 linux kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 20 10:02:35 linux kernel: Adding 24674296k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:24674296k
Sep 20 10:02:35 linux kernel: IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Sep 20 10:02:35 linux kernel: bnx2: eth0: using MSIX
Sep 20 10:02:35 linux kernel: bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
Sep 20 10:02:35 linux kernel: NET: Registered protocol family 10
Sep 20 10:02:35 linux kernel: lo: Disabled Privacy Extensions
Sep 20 10:02:35 linux kernel: IPv6 over IPv4 tunneling driver
Sep 20 10:02:35 linux kernel: Bluetooth: Core ver 2.10
Sep 20 10:02:35 linux kernel: NET: Registered protocol family 31
Sep 20 10:02:35 linux kernel: Bluetooth: HCI device and connection manager initialized
Sep 20 10:02:35 linux kernel: Bluetooth: HCI socket layer initialized
Sep 20 10:02:35 linux kernel: Bluetooth: L2CAP ver 2.8
Sep 20 10:02:35 linux kernel: Bluetooth: L2CAP socket layer initialized
Sep 20 10:02:35 linux kernel: Bluetooth: RFCOMM socket layer initialized
Sep 20 10:02:35 linux kernel: Bluetooth: RFCOMM TTY layer initialized
Sep 20 10:02:35 linux kernel: Bluetooth: RFCOMM ver 1.8
Sep 20 10:02:35 linux kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Sep 20 10:02:40 linux gpm[4631]: *** info [startup.c(95)]: 
Sep 20 10:02:40 linux gpm[4631]: Started gpm successfully. Entered daemon mode.
Sep 20 10:02:43 linux avahi-daemon[4769]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
Sep 20 10:02:43 linux avahi-daemon[4769]: Successfully dropped root privileges.
Sep 20 10:02:43 linux avahi-daemon[4769]: avahi-daemon 0.6.16 starting up.
Sep 20 10:02:43 linux avahi-daemon[4769]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Sep 20 10:02:43 linux avahi-daemon[4769]: Successfully called chroot().
Sep 20 10:02:43 linux avahi-daemon[4769]: Successfully dropped remaining capabilities.
Sep 20 10:02:43 linux avahi-daemon[4769]: No service found in /etc/avahi/services.
Sep 20 10:02:43 linux avahi-daemon[4769]: New relevant interface eth0.IPv6 for mDNS.
Sep 20 10:02:43 linux avahi-daemon[4769]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::226:55ff:fe86:2e64.
Sep 20 10:02:43 linux avahi-daemon[4769]: New relevant interface eth0.IPv4 for mDNS.
Sep 20 10:02:43 linux avahi-daemon[4769]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.66.
Sep 20 10:02:43 linux avahi-daemon[4769]: Network interface enumeration completed.
Sep 20 10:02:43 linux avahi-daemon[4769]: Registering new address record for fe80::226:55ff:fe86:2e64 on eth0.
Sep 20 10:02:43 linux avahi-daemon[4769]: Registering new address record for 192.168.1.66 on eth0.
Sep 20 10:02:43 linux avahi-daemon[4769]: Registering HINFO record with values 'X86_64'/'LINUX'.
Sep 20 10:02:43 linux smartd[4796]: smartd version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen 
Sep 20 10:02:43 linux smartd[4796]: Home page is [url]http://smartmontools.sourceforge.net[/url]/  
Sep 20 10:02:43 linux smartd[4796]: Opened configuration file /etc/smartd.conf 
Sep 20 10:02:43 linux smartd[4796]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices 
Sep 20 10:02:43 linux smartd[4796]: Problem creating device name scan list 
Sep 20 10:02:43 linux smartd[4796]: Problem creating device name scan list 
Sep 20 10:02:43 linux smartd[4796]: In the system's table of devices NO devices found to scan 
Sep 20 10:02:43 linux smartd[4796]: Monitoring 0 ATA and 0 SCSI devices 
Sep 20 10:02:43 linux smartd[4798]: smartd has fork()ed into background mode. New PID=4798. 
Sep 20 10:02:44 linux avahi-daemon[4769]: Server startup complete. Host name is linux.local. Local service cookie is 2848425369.
Sep 20 10:05:01 linux pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Sep 20 10:05:01 linux pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Sep 20 10:10:01 linux pure-ftpd: (?@127.0.0.1) [INFO] New connection from 127.0.0.1
Sep 20 10:10:01 linux pure-ftpd: (?@127.0.0.1) [INFO] Logout.

вот пожалуста

20.09.2010 11:33 #81299

а еще лучше будет, если целиком... включая логи до перезагрузки

20.09.2010 11:48 #81303

уважаемый не могли бы вы дать свой номер icq или агента???

20.09.2010 11:57 #81306

Просто весь лог за пол дня сюда не влезает (((

20.09.2010 11:58 #81307

Дать могу, но сейчас мне будет сильно неудобно решать вопросы по аське, поскольку на работе все ж

20.09.2010 11:59 · отредактировано #81308

smile извеняюсь за мою не учтивость! Не могли бы вы тогда дать инструкцию как прикрипить фаил к сообшению??

20.09.2010 12:35 #81316

Если вы имеете ввиду прикрепление логов, то лучше выбрать специальное место, где их выкладывают и дать ссылку. Например, http://pastebin.com/

20.09.2010 13:03 #81322

http://pastebin.com/WLcLgf20

вот пожалуста !

20.09.2010 13:46 #81330

Elrik12, круто, у вас на сервере блютуз демон поднимается, то новое веяние в энтерпрайз технологиях?
avahi-daemon тоже крайне радует своим присутствием на хостинг сервере.
больше ничего интересного в тих логах нет.
давайте другие, поржём.

20.09.2010 13:55 #81333

Уважаемый system-root я конечно все понимаю и да может быть это смешно ! но ваш стеб крайне не уместен в данной ситуации вместо того чтобы как вы высказались *Поржем* лучьше бы помогли советом!

20.09.2010 14:05 #81338

Elrik12 написал:
лучьше бы помогли советом!

я и помог - в ваших логах ничего нет, что говорило бы о причине перезагрузки.
у вас LVM поверх железного или софт рейда?

20.09.2010 14:10 #81340

system-root написал:
[quote=Elrik12]лучьше бы помогли советом!

я и помог - в ваших логах ничего нет, что говорило бы о причине перезагрузки.
у вас LVM поверх железного или софт рейда?[/quote]

LVM вроде от железа. как смотреть не вкурсе. А насчет рейда на сервере поднят апаратный 5 рейд массив.

20.09.2010 14:16 #81343

ед-е то что вызвало подозрение:

text


Memory for crash kernel (0x0 to 0x0) notwithin permissible range

ну и smartd ругается на диски вот и все.

20.09.2010 14:21 #81347

i2ks написал:
ед-е то что вызвало подозрение:
text
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
ну и smartd ругается на диски вот и все.

как можно это вылечить????

что можно сделать???

20.09.2010 14:28 #81348

Elrik12,

Elrik12 написал:
как можно это выличить????
что можно зделать???

отбой, начиная с версии CentOS5.1:

text


...
В процессе начальной загрузки возможно появление сообщения "Memory for crash kernel (0x0 to 0x0) not within permissible range". Это сообщение появляется из-за новой инфраструктуры kdump и может быть безопасно проигнорировано.
...

По поводу smatrd надо глянуть на что он ругается.

20.09.2010 14:33 #81349

i2ks написал:
Elrik12, [quote=Elrik12]как можно это выличить????
что можно зделать???

отбой, начиная с версии CentOS5.1:

text


...
В процессе начальной загрузки возможно появление сообщения "Memory for crash kernel (0x0 to 0x0) not within permissible range". Это сообщение появляется из-за новой инфраструктуры kdump и может быть безопасно проигнорировано.
...

По поводу smatrd надо глянуть на что он ругается.[/quote]
что вам предоставить логи если логи то как включить их для записи в лог!