Не получается поднять ip-камеру на eth1 При перезагрузке сети пишет - "...не отвечает"
text
[root@localhost /]# ifconfig eth1 192.168.0.20
[root@localhost /]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:24:1d:db:46:bd brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 4c:00:10:54:de:e0 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.20/24 brd 192.168.0.255 scope global eth1
10: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc pfifo_fast qlen 3
link/ppp
inet 188.187.106.179 peer 88.87.65.94/32 scope global ppp0
[root@localhost /]# service network restart
Computing interface groups: ... 3 interfaces found
Stopping group 4/deplog (1 interfaces)
Stopping ppp1: OK
Processing /etc/net/vlantab: empty.
Stopping group 1/realphys (1 interfaces)
Stopping eth1: ..OK
Stopping group 0/virtual (1 interfaces)
Stopping lo: .OK
Computing interface groups: ... 3 interfaces found
Starting group 0/virtual (1 interfaces)
Starting lo: ....OK
Starting group 1/realphys (1 interfaces)
Starting eth1: ....Error, eth1: timed out
!.OK
Processing /etc/net/vlantab: empty.
Starting group 4/deplog (1 interfaces)
Starting ppp1: Подскажите в чём причина? Что надо сделать?
