Не могу войти вдомен и получить Kerberos билет

[2010/11/05 13:07:45.650165,  0] libads/kerberos.c:333(ads_kinit_password)
  kerberos_kinit_password SERVER$@DOMAIN.LOCAL failed: Preauthentication failed

kinit: KDC reply did not match expectations while getting initial credentials

[global]
workgroup = DOMAIN
server string = DOMAIN Proxy Server
#   wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
   interfaces = eth1
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
   max log size = 0
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = ADS
#ALEX    мои доолнения к конфигурации
   hosts allow = 192.168.0.
   hosts allow = 192.168.140.
   password server = serverdc1.domain.local
#   password server = serverdc2.domain.local
   realm = ozna.corp
   passdb backend = tdbsam
   local master = no
   os level = 0
   preferred master = no
#настройки winbind
# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
   passdb backend = tdbsam
   obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfull$
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
   domain logons = no
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
########## Printing ##########
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes
# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap
# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
   domain master = no
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash
# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
   winbind use default domain = no
   winbind uid = 10000-20000
   winbind gid = 10000-20000
   winbind enum groups = yes
   winbind enum users = yes
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

[libdefaults]
        default_realm = DOMAIN.LOCAL
# The following krb5.conf variables are only for MIT Kerberos.
        krb4_config = /etc/krb.conf
        krb4_realms = /etc/krb.realms
        kdc_timesync = 1
        ccache_type = 4
        forwardable = true
        proxiable = true
# The following encryption type specification will be used by MIT Kerberos
# if uncommented.  In general, the defaults in the MIT Kerberos code are
# correct and overriding these specifications only serves to disable new
# encryption types as they are added, creating interoperability problems.
#
# Thie only time when you might need to uncomment these lines and change
# the enctypes is if you have local software that will break on ticket
# caches containing ticket encryption types it doesn't know about (such as
# old versions of Sun Java).
#       default_tgs_enctypes = des3-hmac-sha1
#       default_tkt_enctypes = des3-hmac-sha1
#       permitted_enctypes = des3-hmac-sha1
default_tgs_enctypes = rc4-hmac des-cbc-crc des-cbc-md5
default_tkt_enctypes = rc4-hmac des-cbc-crc des-cbc-md5
# The following libdefaults parameters are only for Heimdal Kerberos.
        v4_instance_resolve = false
        v4_name_convert = {
                host = {
                        rcmd = host
                        ftp = ftp
                }
                plain = {
                        something = something-else
                }
        }
        fcc-mit-ticketflags = true
[realms]
        DOMAIN.LOCAL = {
                kdc = serverdc1.demain.local:88
                kdc = serverdc2.demain.local:88
                admin_server = serverdc2.demain.local:88
                default_domain = demain.local
        }
        ATHENA.MIT.EDU = {
                kdc = kerberos.mit.edu:88
                kdc = kerberos-1.mit.edu:88
                kdc = kerberos-2.mit.edu:88
                admin_server = kerberos.mit.edu
                default_domain = mit.edu
        }
        MEDIA-LAB.MIT.EDU = {
                kdc = kerberos.media.mit.edu
                admin_server = kerberos.media.mit.edu
        }
        ZONE.MIT.EDU = {
                kdc = casio.mit.edu
                kdc = seiko.mit.edu
                admin_server = casio.mit.edu
        }
        MOOF.MIT.EDU = {
                kdc = three-headed-dogcow.mit.edu:88
                kdc = three-headed-dogcow-1.mit.edu:88
                admin_server = three-headed-dogcow.mit.edu
        }
        CSAIL.MIT.EDU = {
                kdc = kerberos-1.csail.mit.edu
                kdc = kerberos-2.csail.mit.edu
                admin_server = kerberos.csail.mit.edu
                default_domain = csail.mit.edu
                krb524_server = krb524.csail.mit.edu
        }
        IHTFP.ORG = {
                kdc = kerberos.ihtfp.org
                admin_server = kerberos.ihtfp.org
        }
        GNU.ORG = {
                kdc = kerberos.gnu.org
                kdc = kerberos-2.gnu.org
                kdc = kerberos-3.gnu.org
                admin_server = kerberos.gnu.org
        }
        1TS.ORG = {
                kdc = kerberos.1ts.org
                admin_server = kerberos.1ts.org
        }
        GRATUITOUS.ORG = {
                kdc = kerberos.gratuitous.org
                admin_server = kerberos.gratuitous.org
        }
        DOOMCOM.ORG = {
                kdc = kerberos.doomcom.org
                admin_server = kerberos.doomcom.org
        }
        ANDREW.CMU.EDU = {
                kdc = vice28.fs.andrew.cmu.edu
                kdc = vice2.fs.andrew.cmu.edu
                kdc = vice11.fs.andrew.cmu.edu
                kdc = vice12.fs.andrew.cmu.edu
                admin_server = vice28.fs.andrew.cmu.edu
                default_domain = andrew.cmu.edu
        }
        CS.CMU.EDU = {
                kdc = kerberos.cs.cmu.edu
                kdc = kerberos-2.srv.cs.cmu.edu
                admin_server = kerberos.cs.cmu.edu
        }
        DEMENTIA.ORG = {
                kdc = kerberos.dementia.org
                kdc = kerberos2.dementia.org
                admin_server = kerberos.dementia.org
        }
        stanford.edu = {
                kdc = krb5auth1.stanford.edu
                kdc = krb5auth2.stanford.edu
                kdc = krb5auth3.stanford.edu
                master_kdc = krb5auth1.stanford.edu
                admin_server = krb5-admin.stanford.edu
                default_domain = stanford.edu
        }
[domain_realm]
        .domain.local = DOMAIN.LOCAL
        domain.local = DOMAIN.LOCAL
        .mit.edu = ATHENA.MIT.EDU
        mit.edu = ATHENA.MIT.EDU
        .media.mit.edu = MEDIA-LAB.MIT.EDU
        media.mit.edu = MEDIA-LAB.MIT.EDU
        .csail.mit.edu = CSAIL.MIT.EDU
        csail.mit.edu = CSAIL.MIT.EDU
        .whoi.edu = ATHENA.MIT.EDU
        whoi.edu = ATHENA.MIT.EDU
        .stanford.edu = stanford.edu
        .slac.stanford.edu = SLAC.STANFORD.EDU
[login]
        krb4_convert = true
        krb4_get_tickets = true
[logging]
        default = FILE:/var/log/kerberos/krb5libs.log
        kdc = FILE:/var/log/kerberos/krb5kdc.log
        admin_server = FILE:/var/log/kerberos/kadmind.log